CBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision

Size: px
Start display at page:

Download "CBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision"

Transcription

1 CBCL Limited Sheet Set Manager Tutorial CBCL Design Management & Best CAD Practices 2013 REV. 02 Our Vision To be the most respected and successful Atlantic Canada based employeeowned firm, delivering multidiscipline engineering and technical services.

2 CBCL Limited AutoCAD Tutorial Using the Sheet Set Manager Contents 1. What is The Sheet Set Manager (Page 3) 2. What are the Benefits (Page 4) 3. Sheet Set Manager Components (Page 5) 4. Sheet Set Manager Field Category Definitions (Page 6) 5. Sheet Set Manager Overall Procedure Reference (Page 8) a. Step 1 - create sheet set project (Page 9) b. Step 2 - add sheets to sheet set (Page 11) c. Step 3 - create viewports with named views for cross-referencing (Page 14) d. Step 4 - add a cover sheet complete with drawing list (Page 18) 6. Tips and References (Page 21) a. Sheet Set Manager File Management Tips (Page 21) b. Sheet Set Manager Field Character Tips (Page 21) c. Sheet Set Manager View Tips (Page 22) d. Sheet Set Manager View Callout Tips (Page 22) e. Sheet Set Manager Drawing List Table Tips (Page 23) 2 P a g e

3 1. What is The Sheet Set Manager The Sheet Set Manager (SSM) is a Tool Palette introduced in AutoCAD 2005 that acts as a document control tool for project drawing sheets. A defined Sheet Set is an organized collection of sheets which can either be started from scratch from a predefined template file or pre-existing sheet set, or as imported layout tabs from existing drawing files. Each sheet defined in the Sheet Set Manager is essentially a hyperlink to a particular layout tab in a drawing file designed to help automatically populate and control project and drawing information from within the Sheet Set Manager. Managing sets of drawings manually can be complicated and time consuming, but with the Sheet set manager, a lot of the upfront leg work greatly reduces potential errors, and makes global modifications easier. The image below show the Sheet Set Manager palette with discipline subsets defined from the CBCL template DST file before any sheets have been added. 3 P a g e

4 2. What are the Benefits Using the Sheet Set Manager helps eliminate a lot of repetitive steps either at the initial setup or throughout the entire course of the project. Below is a list of examples of how using the SSM will save time and help eliminate mistakes. B Arrange Quick Access To Drawing Files With Hyperlinks: Ensures that the correct drawings are being opened, and eliminates time consuming searches through numerous sub-folders. B Manages Project Data And Keeps It Consistent. Ensures that every sheet is using and displaying the same project information [e.g. Yarmouth vs. YARMOUTH vs. Town of Yarmouth across multiple drawings] and correct project information [e.g. some drawings say Phase 1 vs. other drawings saying Phase 2 ] B Modify Project Data Globally Without Opening The Drawings: If a project name or project number has to change, it only has to be done once through the Sheet Set Manager properties, and the change will reflect globally on every drawing in the set B Maintains Accurate Cross-Referencing: All cross-references for Details, Sections, Elevations, etc. will be accurate, and if the source data has to change [e.g. changing a detail number] it only has to be done once via SSM properties, and all cross-references will be globally updated. B Ensures All Users Are Using Same Format Of Callout And View Label Blocks: Eliminates any inconsistent looking callout blocks or section bubbles across multiple drawings and disciplines, and thus prevents operators from using symbols out of their own personal library that does not adhere to company-wide standards. B Ensures all Users Are Using the Same Format Title-Sheet: Prevents users from merely doing a Save As of a previous job using a potentially outdated title-sheet, which can be easily replaced if that is the case. B Creates a List of all The Drawing Sheets in the Project: Inserts an automated linked table listing all the drawings in the set providing drawing the number and drawing title. If sheets are added or removed from the SSM, the drawing list table will update B Print or PDF Sheets Without Opening Drawings: Every drawing in the set, or just selected drawings, can be published in various formats en masse without having to open all the drawing files B Archive Sheets, Drawing Files, and Associated Files in One Step: Collects and saves every related file associated to the SSM and/or individual drawing files and archives them in a ZIP file. 4 P a g e

5 3. Sheet Set Manager Components The image below lists the various components of the Sheet Set Manager palette Right-clicking on the Sheet Set Filename activates the pop-up menu which offers the various options to manage the Sheet Set 5 P a g e

6 4. Sheet Set Manager Field Category Definitions As previously mentioned, in order to automatically populate the title-block with project and sheet data, the Sheet Set Manager uses FIELDS to extract information from the project Sheet Set Manager. In the graphic below, it shows the FIELD command dialog box with the SheetSet Field Category active displaying the different fields available used to extract sheet set data 6 P a g e

7 There are basically five root categories for Sheet Set fields: 1. Current Sheet: These fields extract information from a drawing sheet that would only pertain to that particular sheet, like: Drawing Number, Drawing Title, and any other custom sheet properties like the design team 2. Current Sheet Set: These fields extract information from the current sheet set that would apply globally to every drawing in the package like: Project Name, Project Number, and any custom sheet set properties not available as a default like the client name 3. Sheet Set: These fields extract basic information from the Sheet Set of a different project (i.e. a different DST file) which can be useful if reference must be made between projects that have been broken up into different phases 4. Sheet Set Placeholder: These fields are used in block attribute definitions for View Label details and Callout blocks in order to extract sheet and view related data like: Detail Numbers, Sheet Numbers, Detail Names, and Viewport scale. 5. Sheet View: These fields are used to extract basic information about the attached sheet View names from either the current sheet set or from a sheet set in a different project. 7 P a g e

8 5. Sheet Set Manager Basic Procedure Guide What follows is a basic step-by-step procedure guide on the steps that it takes to create a full-functioning Sheet Set (note: this procedure guide does not go into a lot of detail on how everything works, but enough to create a useable sheet set). The image below shows where the predefined Sheet Set DST template files are located: L:\CAD Standards\General\Sheet Set Manager Templates\ As you can see in the image above, Sheet Set DST files have been created for both Metric and Imperial units using either AutoCAD 2011 or P a g e

9 Step 1 (create sheet set project) The first step is to create a new Sheet Set using a predefined CBCL template and fill in the appropriate project information. 1. Enter the command SHEETSET to open the Sheet Set Manager (SSM) a. Click on the Open pull-down menu and select New Sheet Set b. Select An Example Sheet Set [Next->] c. Select Browse to Another Sheet Set to Use As An Example, and navigate to appropriate template DST file on the network [Next->] 2. In the Sheet Set Details, fill in the Name of New Sheet Set (i.e. project number and name), project Description (optional), and browse to the project folder on network to save the DST file. 9 P a g e

10 3. Click on Sheet Set Properties button and fill in project information (When creating a Sheet Set from a template, the references to Label Block for Views, Callout blocks and Page Setup Overrides File defaults have been predefined within the DST template). [OK] 4. When creating a new Sheet Set from one of the CBCL templates, the discipline subsets (where each discipline saves their drawing sheets) will automatically be created. (note: each discipline references the same predefined title-sheet except for the cover sheet) 10 P a g e

11 Step 2 (add sheets to sheet set) Once the Sheet Set project has been created, drawing sheets can now be added. Below the graphic example there are two methods describing how to add sheets to the Sheet Set, the most common method is Method #2 ( Import Layout as Sheet ). 1. Add new sheets to the Sheet Set by right-clicking on the appropriate discipline sub-set and selecting either New Sheet or Import Layout as Sheet Method #1 The New Sheet option will create a new empty drawing and you will be given the option to SAVE the drawing file complete with a Drawing Number and Description. The Description entered will be part of the filename. Method #2 The Import Layout as Sheet option is the most common method where existing Layout tabs are added to the Sheet Set project. Ensure the proper Title-sheet definition is being used, and the attribute data will get filled in accordingly. 11 P a g e

12 2. Once a sheet has been added in the Sheet Set Manager, simply right-click on the sheet and select Properties to add custom data to appear in the Title-sheet including Drawing Number, Sheet Description, Sheet Number, and Design Team (as well as Revision or Issued information accordingly) TIP! If you have not been supplied with all the pertinent information, the field is blank by default and the information can be added at a later date. TIP! The Sheet Set Manager does NOT recognize blank spaces if you wish to leave a line totally empty. If a space is entered in the field, the title-block attribute will insert --- as a default value. To prevent the ---- from appearing, enter the Alt code 255 in the field (i.e. hold down the Ctrl key and enter 255 from the number pad on your keyboard) 12 P a g e

13 The image below shows the result of what the title-block will look like once its Fields extracts global information from the Sheet Set (i.e. Project Name & Project Number etc.) and specific information from the individual Sheet (i.e. Drawing Description & Drawing Number etc.) LEGEND [RIGHT-CLICK ON EITHER SHEET SET OR SHEET PROPERTIES] CATEGORY HEADER Sheet Set or Sheet Data To Be Entered 13 P a g e

14 Step 3 (create viewports with named views for cross-referencing) Once the modelspace items have been created (i.e. plans, sections, elevations, details, etc.), they are ready to have Viewports created for them. To take advantage of the Sheet Set Manager s cross-referencing function, View names need to be saved for each type of viewport item. 1. With the VIEW command, save View names for all model-space design components (i.e. Plans, Sections, Elevations, Details, etc.) that will be featured in individual viewports (View names should be saved as what best describes the view in question) and then save the drawing. NOTE: When defining the view, make sure the appropriate Annotation Scale (e.g. 1:20, 1:50, 1:500 etc.) is set first (this will be used to properly scale the viewport in Step 3) TIP! When creating a View, use the Define Window option and draw a window around the limits of the modelspace items as close as possible. This window will act as a reference for the size and shape of the Viewport boundary (once the Viewport has been placed in the Layout, it can still be resized) TIP! After defining a View Name, it is good practice to also define a View Category for each type of detail to reside under which allows you to quickly access a particular detail via the Sheet Set Manger in the same way it is quick to access a drawing sheet. For example, if there are a number of road type details (e.g. asphalt paving, curb & gutter, etc.), and then those details would reside under a View Category called ROAD. At the time when a new View Name is being created, click on the View Category pull-down to see if the particular View Category has already been created, and if not, it can be created by enter the category name in the View Category field. To access the details quickly through the Sheet Set Manager, click on the Sheet Views tab, click on the View by Category button (icon looks like a folder) in the title-bar, and then simply double-click on the desired detail view under its particular View Category (the drawing sheet will open an automatically zoom in to that detail view) 14 P a g e

15 2. With the Sheet Set Manager open, a reference link of the project folders containing the drawings with the saved View names. Click on the Model Views tab, right-click on Add New Location and select Add New Location, browse to the project folder accordingly and click Open. 3. To add the saved Views as viewports on to their respective sheets, expand the drawing file in the Model Views tab, right-click on the desired View name and select Place on Sheet. A scaled viewport with a View label block definition will be placed on the sheet as seen in the image below. 15 P a g e

16 The View Label uses the predefined block DETAIL which contains predefined attributes where the default values are FIELDS that extracts Sheet View information. Once inserted, do NOT explode the block (or any block). The image below shows what the DETAIL block looks like by default when inserted. The word DETAIL is an attribute and can be manually overwritten to say SECTION or ELEVATION (etc.) if required. If the block is not associated with a Sheet Set project, the default field attributes can also be overwritten if desired. 4. To assign a number or letter to the detail view, click on the Sheet Views tab on the Sheet Set Manager, right-click on the detail view and select Rename & Renumber, and enter a detail number in the Number field as required. Once a Detail View has been assigned a number, a callout block can been placed anywhere throughout the entire drawing package (regardless of the discipline) which will extract the Detail Number and the Drawing Sheet the detail resides on (see step 5 below). 16 P a g e

17 5. To place Callout Blocks for each Detail view, navigate to the drawing Layout tab, click on the Sheet Views tab on the Sheet Set Manager, right-click on the detail view in particular and select the Place Callout Block fly-out menu and select the type of callout (i.e. Detail, Section, or Rectangle). The callout block will have the detail & sheet number automatically filled in. Like the View Label, the Callout Blocks uses block definitions which contain predefined attributes where the default values are FIELDS that extracts Sheet View information. If a Detail View is renumbered, all of the Callout Blocks that make reference to that detail will be updated automatically the next time the drawing is Regenerated or Reopened. The image below shows what each callout block looks like by default when inserted. Both the Rectangle and Section callout blocks have dynamic properties in which their appearance can be changed to suit the situation. If any of these blocks are not associated with a Sheet Set project, the default field attributes can also be overwritten if desired. 17 P a g e

18 Step 4 (add a cover sheet complete with drawing list) 1. To add Cover Sheet, right-click on the Cover Sheet subset and select New Sheet and enter 00 for the drawing number, and Cover Sheet for the Sheet Title. The subset has been defined to use a cover sheet layout tab from the predefined CBCL title-sheet template. 2. To create a Drawing List on the cover sheet, right-click on the Sheet Set Filename header and select Insert Sheet List Table (as seen in the image below) 18 P a g e

19 3. In the Sheet List Table dialog box, select the CBCL Drawing List Table as the table style, click the checkbox Show Subheader on, click on the Subsets and Sheets tab and ensure all the necessary sheets to appear on the cover sheet are checked on, and click the OK button. Once the Drawing List table is inserted, it looks like image as seen below on the leftl. But when plotted, the table lookks like the image as seen above on the right. TIP! In the event that sheets are either added, removed, or modified, the Sheet List Table can be updated. Simply click insideany one of the table cells, right-click and select Sheet List Table fly-out menu, and then select Update Sheet List Table 19 P a g e

20 Below is an image that shows which Sheet set fields are define in the cover sheet NOTE: Each time the drawing package is issued, the Revision Description and Revision Date will have to be changed to reflect how the drawing package is being issued. NOTE: If possible, the cover sheet Layout tab should be created in a drawing file where a Key Plan can be created using a Viewport of the model space contents (i.e. a Civil Site Plan or Architectural Floor Plan, etc.) NOTE: If a client logo is available (preferably in CAD format), then it needs to be inserted next to the CBCL logo matching the overall height or whatever has the better presentation. 20 P a g e

21 6. Tips and References Below is a collection of tips (some of which have already been mentioned in this tutorial) that will make using the Sheet Set Manager a little easier. a. Sheet Set Manager File Management Tips In the event that a user must work on two or more jobs at once, the Sheet Set Manager has the ability to have more than one Sheet Set open at a time. When done working in a Sheet Set project, simply right-click on the Sheet Set file name and select Close Sheet Set In order to preserve a version of the drawing package after each submission and/or Record Drawing stage, the Sheet Set project can either be Archived or etransmitted (both of which collect the electronic files and save them in a compressed ZIP file). The difference between Archiving and etransmitting is that the Archive function will include all the template files used in addition to all the project files. More than one user can access the Sheet Set at any given time, but the users will see a padlock icon next to all the drawing sheets that are already being accessed. In order to make changes to the properties of either the Sheet Set project, or the individual sheets, a single or blank drawing must be open in order to make edits to the Sheet Set. The Sheet Set Manager has an automatic refresh which can slow AutoCAD down (especially is multiple users are simultaneously working within the same Sheet Set project). To turn this automatic refresh off, enter the command SSMSHEETSTATUS and set the value to 0 (i.e. zero ). To refresh it manually, click the Refresh Sheet Status button which is located in the Sheets title-bar. If you are not currently working in a Sheet Set project, close the Sheet Set file by right-clicking on the Sheet Set file name and select Close Sheet Set (this will increase AutoCAD s overall performance) Another way to increase performance of the Sheet Set Manager is to minimize all the drawing subsets that you do not work in. Having each discipline s subset expanded showing its list of drawing sheets will slow AutoCAD down. Simply click the subset s tree [-] button to minimize the drawing list (to expand it again, click it when it looks like [+] ). b. Sheet Set Manager Field Character Tips The Sheet Set Manager does NOT recognize blank spaces if you wish to leave a line totally empty. If a space is entered in the field, the title-block attribute will insert dashes like --- as a default value. To prevent the ---- from appearing, enter the Alt code 255 in the field (i.e. hold down the Alt key and enter 255 from the number pad on your keyboard) There are many characters which can t be used in a Sheet Set field including: \ < > /? ; : *, = (because these characters are used in programming languages). But there is a trick using Alt codes in order to sneak some of them in including: o (left double quote) = Alt 0145 o (right double quote) = Alt 0148 o (left single quote) = Alt 0145 o (right single quote) = Alt 0146 o, (comma) = Alt 0130 o ; (semi colon) = Alt 59 o Ø (diameter) Alt P a g e

22 If the default Sheet Set attribute values have been overwritten, they can be replaced again simply by accessing attribute value through the attribute editor, and press Ctrl F in the attribute field to launch the FIELD command, access the Sheet Set values, and select the desired value. c. Sheet Set Manager View Tips When creating a View, use the Define Window option and draw a window around the limits of the modelspace items as close as possible. This window will act as a reference for the size and shape of the Viewport boundary (once the Viewport has been placed in the Layout, it can still be resized) After placing a Viewport in the Layout tab, the View Label (i.e. block definition DETAIL ) is also placed in the Layout tab. If you wish the View Label to be placed in Modelspace, simply use the CHSPACE command and send it through the Viewport accordingly. When placing a Detail View in the Layout tab, the Viewport boundary will be placed on whatever layer is set current. After defining a View Name, it is good practice to also define a View Category for each type of detail to reside under which allows you to quickly access a particular detail via the Sheet Set Manger in the same way it is quick to access a drawing sheet. d. Sheet Set Manager View Callout Tips The callout block used for sections is defined as SECTION CALLOUT which has been defined with Dynamic Properties. This means it contains features to change its appearance including: rotating the section arrow while the text stays horizontal, includes different types of section lines that can be independently stretched and mirrored, and has a visibility state for an Elevation Arrow which can also be independently rotated. The callout block containing a rectangle is defined as RECTANGLE CALLOUT which also has been defined with Dynamic Properties. The rectangle can be stretched to change its size and shape, and the callout bubble and leader can be mirrored around all four sides. References can be made to Sheet Set items without using callout blocks or view labels. If a note within a Text, MText, or an MLeader object must make reference to a Sheet Set item, a FIELD (press Ctrl F) can be used to access and insert the Sheet Set item. For example, if a general note says For General Notes, See Drawing 2, the number 2 can be a FIELD to access the Sheet Set drawing number. Inserting a Field works for Matchlines where if the drawing number being matched to changes, the Matchline note referencing the drawing number will automatically update after a Regen. Detail callout blocks should not be placed too early during the design process in case Detail Views are removed or reshuffled to other drawings. Changing a detail number or renumbering the sheet it s on will not affect the callout reference link, but if a detail view is removed or relocated to another sheet, then any callout blocks will lose their dynamic links will have to be replaced or re-associated. 22 P a g e

23 e. Sheet Set Manager Drawing List Table Tips In the event that sheets are either added, removed, or modified, the Sheet List Table can be updated. Simply click inside any one of the table cells, right-click and select Sheet List Table fly-out menu, and then select Update Sheet List Table A drawing can removed from the Drawing List Table simply clicking inside any one of the table cells, right-click and select Sheet List Table fly-out menu, and then select Edit Sheet List Table Settings, click on the Subsets and Sheets tab, and un-check the drawing that you do want to appear in the Drawing List Table. Then follow the procedure listed above to update the table. This Tutorial was prepared by the CBCL Limited CAD Systems Analyst. Your comments are welcomed. Please direct any responses to Murray Clack (murrayc@cbcl.ca) or , Ext Rev 01 - This was initially prepared in January Rev 02 - Revision: September 20, 2013 (Revision attributes defaults removed from SSM) 23 P a g e

Advanced Topics Using the Sheet Set Manager in AutoCAD

Advanced Topics Using the Sheet Set Manager in AutoCAD Advanced Topics Using the Sheet Set Manager in AutoCAD Sam Lucido Haley and Aldrich, Inc. GEN15297 Do you still open drawings one at a time? Do you print drawings one at a time? Do you update the index

More information

Create all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.

Create all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings. NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan

More information

Create styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.

Create styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing. NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use

More information

Using Dynamic Views. Module Overview. Module Prerequisites. Module Objectives

Using Dynamic Views. Module Overview. Module Prerequisites. Module Objectives Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;

More information

Getting Started Guide

Getting Started Guide SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.

More information

A Quick Spin on Autodesk Revit Building

A Quick Spin on Autodesk Revit Building 11/28/2005-3:00 pm - 4:30 pm Room:Americas Seminar [Lab] (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida A Quick Spin on Autodesk Revit Building Amy Fietkau - Autodesk and John Jansen;

More information

Sheets Happen! Using the Sheet Set Manager

Sheets Happen! Using the Sheet Set Manager Sheets Happen! Using the Sheet Set Manager Westwood Professional Services June 2007 Using AutoCAD s Sheet Set Manager Introduction The Sheet Set Manager organizes, displays, and manages sheet sets, a named

More information

Making Standard Note Blocks and Placing the Bracket in a Drawing Border

Making Standard Note Blocks and Placing the Bracket in a Drawing Border C h a p t e r 12 Making Standard Note Blocks and Placing the Bracket in a Drawing Border In this chapter, you will learn the following to World Class standards: Making standard mechanical notes Using the

More information

Vectorworks Essentials

Vectorworks Essentials by Jonathan Pickup fourth edition written with version 2012 Vectorworks Essentials Tutorial Manual Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 What s in This Manual... v 0.3 New

More information

Zooming in on Architectural Desktop Layouts Alexander L. Wood

Zooming in on Architectural Desktop Layouts Alexander L. Wood December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

REVIT - RENDERING & DRAWINGS

REVIT - RENDERING & DRAWINGS TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.

More information

Vectorworks Architect

Vectorworks Architect SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks

More information

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT

More information

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5 Rhinoceros modeling tools for designers Using Layouts in Rhino 5 RH50-TM-LAY-Apr-2014 Rhinoceros v5.0, Layouts, Training Manual Revised April 8, 2014, Mary Fugier mary@mcneel.com Q&A April 8, 2014, Lambertus

More information

Subdivision Cross Sections and Quantities

Subdivision Cross Sections and Quantities NOTES Module 11 Subdivision Cross Sections and Quantities Quantity calculation and cross section generation are required elements of subdivision design projects. After the design is completed and approved

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Module 10. Assemblies and Corridors. Objectives

Module 10. Assemblies and Corridors. Objectives NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly

More information

Section Table of Contents: Section 16.0

Section Table of Contents: Section 16.0 Section 16.0 Table of Contents: Section 16.0 Overview - Section 16.0... 16.0-3 Plotting Single Sheets... 16.0-3 Publishing... 16.0-5 Creating DWFs or PDFs (with Sheet Sets)... 16.0-6 Overview - Section

More information

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING

More information

Mastering. AutoCAD Sheet Sets THE COVER. An Expert Guide

Mastering. AutoCAD Sheet Sets THE COVER. An Expert Guide Mastering THE COVER Qui volore imagnihillit que la nimolora vellorendemporaecab imperit harum que dolor mint faccabori inveles et fugitibus dioris maiones. AutoCAD Sheet Sets An Expert Guide Contents Introduction

More information

Appendix to Chapter 1 Release 3

Appendix to Chapter 1 Release 3 Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,

More information

Working with Detail Components and Managing DetailsChapter1:

Working with Detail Components and Managing DetailsChapter1: Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail

More information

Autodesk Advance Steel. Drawing Style Manager s guide

Autodesk Advance Steel. Drawing Style Manager s guide Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style

More information

Drawing Layouts Paper space & Model Space

Drawing Layouts Paper space & Model Space Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they

More information

Getting Started with. Vectorworks Architect

Getting Started with. Vectorworks Architect Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Introduction to QTO. Objectives of QTO. Getting Started. Requirements. Creating a Bill of Quantities. Updating an existing Bill of Quantities

Introduction to QTO. Objectives of QTO. Getting Started. Requirements. Creating a Bill of Quantities. Updating an existing Bill of Quantities QTO User Manual Contents Introduction to QTO... 5 Objectives of QTO... 5 Getting Started... 5 QTO Manager... 6 QTO Layout... 7 Bill of Quantities... 8 Measure Folders... 9 Drawings... 10 Zooming and Scrolling...

More information

Mastering AutoCAD 2D

Mastering AutoCAD 2D Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust

More information

User Guide V10 SP1 Addendum

User Guide V10 SP1 Addendum Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or

More information

AECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated.

AECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated. AECOsim Building Designer Quick Start Guide Chapter A06 Creating a Master Model 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Creating a Master Model...3 References... 4

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

SMALL OFFICE TUTORIAL

SMALL OFFICE TUTORIAL SMALL OFFICE TUTORIAL in this lesson you will get a down and dirty overview of the functionality of Revit Architecture. The very basics of creating walls, doors, windows, roofs, annotations and dimensioning.

More information

Autodesk University Advanced Topics Using the Sheet Set Manager in AutoCAD

Autodesk University Advanced Topics Using the Sheet Set Manager in AutoCAD Autodesk University Advanced Topics Using the Sheet Set Manager in AutoCAD You guys, some of you I already know, and some of you have seen me before, and you've seen my giant head on the banner out there.

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

Vectorworks Architect Tutorial Manual by Jonathan Pickup. Sample

Vectorworks Architect Tutorial Manual by Jonathan Pickup. Sample Vectorworks Architect Tutorial Manual by Jonathan Pickup Table of Contents Introduction...iii Step 1 Layer and Model Setup... 1 Document Setup...1 Layer Setup (Model Setup)...7 Step 2 Property Line...

More information

036-ShopDrawings hsbinoutput/shop Drawings

036-ShopDrawings hsbinoutput/shop Drawings 1 FUNCTION The function of this document is to provide information on how to use the shop drawings (hsbinoutput\shop drawings) in hsb2009+. In hsbcad you have Element drawings that can be generated automatically

More information

State of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting

State of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT

More information

AECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated

AECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create

More information

Working With Drawing Views-I

Working With Drawing Views-I Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined

More information

Advance Steel. Drawing Style Manager s guide

Advance Steel. Drawing Style Manager s guide Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9

More information

AECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.

AECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated. AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3

More information

Draw IT 2016 for AutoCAD

Draw IT 2016 for AutoCAD Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...

More information

OVERRIDE PRESETS. Use the properties window on individual lines to accomplish this change.

OVERRIDE PRESETS. Use the properties window on individual lines to accomplish this change. OVERRIDE PRESETS Despite having set line weights up in a drawing, it is often necessary to add individual lines of different weights for example, ground lines in sections and elevations must be a thicker

More information

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,

More information

Creating a 2D Drawing in Paper Space

Creating a 2D Drawing in Paper Space C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Scaffolding Software iscaf - Design v6.50. New Features. August 2015

Scaffolding Software iscaf - Design v6.50. New Features. August 2015 Scaffolding Software iscaf - Design v6.50 August 2015 2010-2015 iscaf - Design : 6.5 (August, 2015) Windows 10 No Problem! All our software runs on Windows 10. iscaf is also optimized for 64-bit operating

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

MWF Rafters. User Guide

MWF Rafters. User Guide MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...

More information

Drawing Management Brain Dump

Drawing Management Brain Dump Drawing Management Brain Dump Paul McArdle Autodesk, Inc. April 11, 2003 This brain dump is intended to shed some light on the high level design philosophy behind the Drawing Management feature and how

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

Engineering Technology

Engineering Technology Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Archicad Layout of Drawings

Archicad Layout of Drawings Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings

More information

1Getting set up to start this exercise

1Getting set up to start this exercise AutoCAD Architectural DesktopTM 2.0 - Development Guide EXERCISE 1 Creating a Foundation Plan and getting an overview of how this program functions. Contents: Getting set up to start this exercise ----

More information

What's New in Autodesk Architectural Desktop 2004? Kelcey Lemon

What's New in Autodesk Architectural Desktop 2004? Kelcey Lemon December 2-5, 2003 MGM Grand Hotel Las Vegas What's New in Autodesk Architectural Desktop 2004? Kelcey Lemon BD31-5L Autodesk Architectural Desktop 2004 has well over 300 new features and enhancements.

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details

More information

CSI: CAD Standards Implementation

CSI: CAD Standards Implementation CSI: CAD Standards Implementation Sam Lucido Haley and Aldrich, Inc. IT15277 Did you know that AutoCAD has a CAD Standards Manager? Yes, there is a panel on the Ribbon under the manage tab where you can

More information

Digital Photo Guide. Version 8

Digital Photo Guide. Version 8 Digital Photo Guide Version 8 Simsol Photo Guide 1 Simsol s Digital Photo Guide Contents Simsol s Digital Photo Guide Contents 1 Setting Up Your Camera to Take a Good Photo 2 Importing Digital Photos into

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Interference? Verify and Analyze This!

Interference? Verify and Analyze This! 11/30/2005-3:00 pm - 4:30 pm Room:N. Hemispheres (Salon A2) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida David Butts - CADRE Systems Inc. ME34-1 In Autodesk Building Systems you

More information

Existing and Design Profiles

Existing and Design Profiles NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles

More information

Materials Tutorial. Chapter 6: Setting Materials Defaults

Materials Tutorial. Chapter 6: Setting Materials Defaults Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Getting Started with. Vectorworks Architect

Getting Started with. Vectorworks Architect Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program

More information

TPC Desktop Series. Drawing Learning Guide

TPC Desktop Series. Drawing Learning Guide TPC Desktop Series Drawing Learning Guide 1/14 NOTICE The information in this document is subject to change without notice. TRAVERSE PC. Inc. assumes no responsibility for any errors that may appear in

More information

Archicad Layout of Drawings

Archicad Layout of Drawings Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings

More information

Star Defender. Section 1

Star Defender. Section 1 Star Defender Section 1 For the first full Construct 2 game, you're going to create a space shooter game called Star Defender. In this game, you'll create a space ship that will be able to destroy the

More information

ARCHITECT VECTORWORKS EIGHTH EDITION TUTORIAL MANUAL BY JONATHAN PICKUP

ARCHITECT VECTORWORKS EIGHTH EDITION TUTORIAL MANUAL BY JONATHAN PICKUP CH EIGHTH EDITION TUTORIAL MANUAL BY JONATHAN PICKUP A M TO R I A L T TU EC IT UA L AR ARCHITECT N HTH EDITION EIG / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

More information

Exercise 1: The AutoCAD Civil 3D Environment

Exercise 1: The AutoCAD Civil 3D Environment Exercise 1: The AutoCAD Civil 3D Environment AutoCAD Civil 3D Interface Object Base Layer Object Component Layers 1-1 Introduction to Commercial Site Grading Plans AutoCAD Civil 3D Interface AutoCAD Civil

More information

Getting Started. with Easy Blue Print

Getting Started. with Easy Blue Print Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the

More information

Design, Drawing and Sheet Composition

Design, Drawing and Sheet Composition Design, Drawing and Sheet Composition Tools, Technologies and Concepts 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated 2 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating

More information

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a

More information

33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof

33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof 33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof A RoofLogic Digitizer license upgrades RoofCAD so that you have the ability to digitize paper plans, electronic plans and

More information

Annex IV - Stencyl Tutorial

Annex IV - Stencyl Tutorial Annex IV - Stencyl Tutorial This short, hands-on tutorial will walk you through the steps needed to create a simple platformer using premade content, so that you can become familiar with the main parts

More information

Geometry Controls and Report

Geometry Controls and Report Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

Template Drawings. Template Drawings. AutoCAD Essentials

Template Drawings. Template Drawings. AutoCAD Essentials AutoCAD Essentials Starting a new drawing using any CAD software requires a series of steps. Measurement units, sheet size, layer designations, text fonts and text sizes plus many more items must be set.

More information

Miami University. Physical Facilities Department. CAD Standards. April 2004

Miami University. Physical Facilities Department. CAD Standards. April 2004 Miami University Physical Facilities Department CAD Standards April 2004 1.0.0 OVERVIEW These standards pertain to the use, production and submittal of electronic CAD files at Miami University. They have

More information

Record As-Built Drawings for Capital Projects

Record As-Built Drawings for Capital Projects Section 19.1 Record As-Built Drawings for Capital Projects Overview - Section 19.1 Internal Use: Full compliance where applicable Contractor Use: Full compliance where applicable The intention of this

More information

Inserting and Creating ImagesChapter1:

Inserting and Creating ImagesChapter1: Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings

More information

Advance Concrete. Tutorial

Advance Concrete. Tutorial Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances

More information

14 - Dimensioning. Dimension Styles & settings. Arrows tab.

14 - Dimensioning. Dimension Styles & settings. Arrows tab. 14 - Dimensioning Dimensioning is always a complex topic in any CAD system because there are so many options and variables to deal with. progecad collects all the numerous settings together in the Dimension

More information

Tutorial 2: Setting up the Drawing Environment

Tutorial 2: Setting up the Drawing Environment Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we

More information

Managing images with NewZapp

Managing images with NewZapp Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account

More information

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7

Table of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10

More information

No Sheet! You can do that with the SSM in AutoCAD

No Sheet! You can do that with the SSM in AutoCAD . No Sheet! You can do that with the SSM in AutoCAD Sam Lucido CAD Services Manager Haley and Aldrich, Inc. @CADproTips Join the conversation #AU2015 Class summary The Sheet Set Manager (SSM) in AutoCAD

More information

SKKK 1021 Engineering Drawing

SKKK 1021 Engineering Drawing SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use

More information

ARC HYDRO GROUNDWATER TUTORIALS

ARC HYDRO GROUNDWATER TUTORIALS ARC HYDRO GROUNDWATER TUTORIALS Subsurface Analyst Creating ArcMap cross sections from existing cross section images Arc Hydro Groundwater (AHGW) is a geodatabase design for representing groundwater datasets

More information

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)

More information

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

Version 8 Tutorial

Version 8 Tutorial Version 8 Tutorial 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector and PDF...

More information