24" CASEY PATTERN NUMBER DA 1528 BODY PATTERN DA 1114

Transcription

1 READ ALL STRUCTOS BEFORE CUTTG FABRC X All seas are 14" unless therwise stated in the pattern instructins. WRST With Right Sides Tgether X Serge r igg all raw edges., FABRC & OTOS YD f 45" wide striped cttn fabric 1 yd f 45" wide cttn chabray 1 set f verall hks and buttns 1 train applique 1 train buttn 8 Rivets Yellw thread fr tp stitching 6 buttns fr shirt 7" X 7" red rag fr pcket 12 yd f sew in interfacing OVERALL COSTRUCTO 1. Fld the back pckets in half at the line n the pattern. 2. Tu under and press 14" n the 4 sides f the fabric that has a raw edge. 3. Sew the pcket n t the back f the pants were arked n the pattern. 4. Yu will sew 2 rws f tp stitching with the yellw thread. Then yu will put ne rivet n the tw tp cers f the pcket. 5. On the frnt pants yu will turn under 14" n the frnt pcket arked n the pattern, and tp stitch with yellw thread. 6. Fr the frnt pcket yu will igag tw f the sides f the piece. 7. One side f the pcket that yu did nt igag yu will sew t the inside f the pants frnt with the right side f the pcket up agents the wrng side f the pants. SEE MARKG O PATTER. PATTER UMBER BODY PATTER DA 1114 MOLD AVALABLe FROM: THE DDLC ATOKS 3714 HWY CC LATHAM, MO 655 TEL ORDERS OLY li WRST sew the pants frnt the back at the inner leg sea. 9. WRST sew the crtch sea. 1. WRST sew the frnt and back tgether at the side sea. (be sure t catch the frnt pcket). 11. On the center frnt f the pants yu will need t tp stitch in a false fly. 12. On the side seas f the pants yu will tp stitch tw rw f stitching n the seas. 13. Fr the frnt bib, yu will sew WRST the tp and the tw sides f the bib. 14. Tu the bib right sides ut and press. WRST sew the bib t the frnt waist band f the pants. Finish the inside f the waist band with a igag r surge. 15. Yu will sew 2 rws f tp stitching arund the utside f the bib and a rw f tp stitching at the waistband. 16. T ake the shulder straps, WRST sew the straps t ake a lng tube. Tu the tube right side ut and press. 17. At ne end f the strap yu will sew the back f the pants, the wrng side f the strap t the right side f the pants. 18. Take the back patch and tu under 14" all the way arund and tp stitch it t the back f the pants, Wrng side f patch t right side f pants. 19. The ther end f the straps yu will thread n yur verall buckle. 2. On the frnt f the bib yu will put n the verall buttn were arked n pattern. 21. Yu will put 2 rivets n the tp and btt f the frnt pckets n the pants. 22. T he the pants yu will tu under 14 and tp stitch the he in place. 23. Sew the applique t the frnt f the bib. Yu can all re tp stitching if yu feel it needs it. Have fun with ur little train engineer. SHRT COSTRUCTO 24. WRST sew the frnt and back tgether at the shulder. 25. WRST pin sleeve t arhle edge, sew. 26. WRST sew the cuff t the sleeve. 27. Fld the cuff in half, WRST and sew the tw shrt ends. 28. Tu the cuffs right side ut and press. Yu can tp stitch r and sew this sea in place. 29. WRST sew the frnt and back tgether at the underar sea and side sea. 3. Finish ff the part befre the cuff n the underar sea by turning under 14" and tp stitching. 31. WRST sew the tw cllars tgether n the ne lng side and the tw shrt sides. 32. Tu the cllar right side ut and press. 33. WRST pin the cllar n t the shirt atching large dts. Sew in place. 34. Clip neck edge f garent and staystitch. 35. Tu frnt extensin t utside alng fld line, fring the facing, baste t neck edge. 36. Tu facing t inside, tuning back neck sea tward cllar, press. Tack facing t shulder sea. 37. He the btt f the shirt with a 14" he and tp stitch. 38. Fr the buttns dwn the frnt f the shirt and n the sleeve cuffs. Yu will sew a snap n t the spt and sew a buttn n the utside f the garent. HAT COSTRUCTO 39. WRST sew the bri f the hat tgether n the runded edge. Tu right side ut and press. 4. Tri the cardbard 14" all the way arund. nsert the cardbard in t the hat bri. baste the pen end clsed t keep the cardbard in. 41. Baste the hat bri t the band between dts. 42. WRST sew the hat band tgether arund the lng edge. Tu right side ut and tp stitch the btt f the hat band. 43. WRST sew the hat band tgether at the shrt end. t ake it a circle. 44. Fld all the pleats in n the tp f the hat and baste arund the edge. 45. WRST sew the tp f the hat t the band and tp stitch the tp f the band. 46. Befre yu d all f the tp stitching n the hat yu will need t try it n yur dll t ake sure that it will fit and yu ay need t adjust the hat band. 47. Sew the train buttn t the center frnt f the hat band. PAGE 1 OF 5

2 ( TAPE B TO au HERE 1 C =.. en ) B PATS BACK " i._._ ""1:1» Ci)." U'

3 M COLLAR, O FOLD ",.. =a c =a U CD H SHRT FROT SHRT BACK CUT 1 O FOLD O FOLD

4 PATTERH UMBER HATBAD O FOLD OF FABRC CUT 1 O FOLD OF TERFACG Q J u.. + G FROT POCKETS PAGE 4 OF 5 J FOLD UE E SHOULDER STRAPS O FOLD Q J u. _ ' HAT BRM, OF FABRC " CUT 1 OF CARDBOARD D BACK POCKETS O FOLD +FOLD le 'PC DA1528, UPPER BACK PATCH CUT1

5 PATTER UMBER PAGE 5 OF 5 F BB FROT G 1 O P HAT TOP CUT 1 O FOLD OF FABRC CUT 1 O FOLD OF TERFACG Ll l_} H8l.l.S dol. l.u :J..J u. f) &. ) CD 111 U)ce ) eel&. eeufl):»o ee Q ee D. U CD)&. :» = g G f) L.