ISO/TC67/SC4 Work Group 4 Annual Report

Transcription

1 ISO/TC67/SC4 Work Group 4 Annual Report Convenor information. Mr. Bert Dijkhuis (Convenor) Van Bommellaan VN Wassenaar The Netherlands Tel. +31 (0) edykhuis@wanadoo.nl 2. Listing of projects and members. See attachment. 3. Introduction and overview. The time of WG4 in 2007 / 2008 has been spent to process documents through the CD-DIS- FDIS phases. Considerable progress has been made so that most currently active projects will reach IS status in 2007 or 2008, of these two being reactivated during 2006 as result of the systematic mandatory review process. The process of systematic mandatory review will cause a concentration in the years 2009 to The time available between 2007 / 2008 and 2009 /2010 provides a good opportunity to select and initiate new projects for WG4. It is planned to start this selection process already in A NWI draft for Completion Accessories is in preparation. During 2006 some of the long standing members of WG4 have been retired in their companies and consequently have laid down their participation in WG4. As stated in earlier annual reports it is difficult to replace leaving members. 4. ISO SSSV systems Title ISO SSSV systems TGL: A. Freeman (acting) IS 2 nd Edition published in ISO and WG4 format in July, Reaffirmation ballot passed in None Planned. Next review in 2013.

2 5. ISO Sucker rods Title ISO Sucker rods TGL: B. Williams IS published as fast track copy of existing API standard Dec Revision into ISO format completed by taskgroup and reviewed by WG4. In the revision the taskgroup and WG4 have converted existing document to WG4 and ISO formats. Most existing material in Annexes, and a new main body with functional, technical specifications and supplier / manufacturer requirements. DIS circulation started on Comments reviewed by taskgroup and WG4. FDIS in preparation. Will be forwarded to SC4 secretariat in June/July, IS expected towards end of ISO Pumping units Title ISO Pumping units TGL: E. Dijkhuis (acting) IS published as fast track copy of existing API standard Dec Revision into ISO format completed by taskgroup and reviewed by WG4. In the revision the taskgroup and WG4 have converted existing document to WG4 and ISO formats. Most existing material in Annexes, and a new main body with functional, technical specifications and supplier / manufacturer requirements. DIS circulation started on Comments reviewed by taskgroup and WG4. Finalization on SI/USC formulas to be completed. FDIS in preparation. Will be forwarded to SC4 secretariat in July, IS expected towards end of ISO Subsurface safety valves Title ISO Subsurface safety valves TGL: E. Dijkhuis (acting) IS 2 nd Edition published in ISO Format version of existing API document in Nov IS revised, 3 rd Edition published Dec in WG4 format with Functional/Technical specifications and Supplier/Manufacturer requirements format. Re-affirmation ballot passed in Plan to re-affirm the current document. API taskgroup leader to review current document with MMS for possible future revisions.

3 8. ISO Packers and Bridgeplugs Title ISO Packers and Bridgeplugs TGL: G. Ellis IS published Dec NWI proposal for revision in 2006 as part of systematic, mandatory review has been approved. DIS issued on The taskgroup has completed the revision and after review WG4 has forwarded the document to SC4 secretariat for FDIS circulation. A publication of FDIS is expected in June 2008, implying IS issue by end of ISO PCP systems: pumps Title ISO PCP systems: pumps TGL: S. Noonan IS published in July, 2001 NWI proposal for revision in 2006 as part of systematic, mandatory review has been approved. Revision has been prepared by taskgroup. Taskgroup and WG4 reviewed proposed DIS document. This will be forwarded to SC4 secretariat by June, DIS to be circulated in second half of FDIS and IS expected in first half of ISO PCP systems: surface drive Title ISO PCP systems: surface drive IS was published in May TGL: D. McCalvin (acting) No activities planned. First revision expected in 2009 at mandatory review.

4 11. ISO Lock Mandrels Title ISO Lock Mandrels TGL: A. Freeman (acting) IS 2 nd Edition published in Dec No activities planned. First systematic review expected in 2008/ ISO Side-pocket mandrels Title ISO Side-pocket mandrels TGL: W. Mabry IS published Dec Systematic review ballot passed in Feb Document recommended to be affirmed. Next review in ISO Flow control devices Title ISO Flow control devices TGL: W. Mabry DIS ballot and comments concluded March 27, Taskgroup reviewed comments and adapted document for FDIS circulation. FDIS ballot closed and IS issued on First systematic review in 2010.

5 14. ISO Latches Title ISO Latches TGL: W. Mabry CD was published May DIS ballot issued on DIS comments were received and sent to project leader. Comments and FDIS preparation to be completed by taskgroup and reviewed by WG4. FDIS expected in second half 2008 with IS published in ISO Practices Title ISO Practices TGL: W. Mabry CD was issued. CD comments and DIS preparation completed. DIS circulation started on Review of DIS comments and preparation of FDIS expected in first half of ISO Sand control screens Title ISO Sand control screens TGL: G. Gillespie CD issue expected soon. Joint review of CD comments and DIS preparation completed. DIS ballot expected to start June/July FDIS expected in first half 2009.

6 17. ISO Subsurface Barrier Valve Title ISO Subsurface Barrier Valve TGL: D. McCalvin CD prepared by workgroup and sent for ballot. Ballot closed May 30, Completed CD draft. CD comment resolution and DIS circulation are expected in second half FDIS expected first half 2009.

7 WG4 MEMBERSHIP 2006 / 2007 Name Company Country Function WG 4 Core Group E. Dijkhuis Bert BPEM, Wassenaar The Netherlands Convenor /secretary edykhuis@wanadoo.nl A. Freeman Austin Halliburton, Dallas USA Member austin.freeman@halliburton.com D. McCalvin David Schlumberger, Houston USA Member dmccalvin@slb.com J. Lemcke Jeff Weatherford, Houston USA Member Jeffrey.Lembcke@weatherford.co m W. Black William Weatherford, Houston USA Member William.Black@weatherford.com J. Sloan Jim Baker Oil Tools, Broken Arrow USA Member jim.sloan@bakeroiltools.com D. Ott David Baker Oil Tools, Houston. USA Member David.Ott@bakerhughes.com D. Kaminski Dennis British Petroleum, Houston USA Member dennis.kaminski@bp.com E. Baniak Ed API, Washington USA Member Baniake@api.org Task Group Leaders Name Company Country Document E. Dijkhuis Bert BPEM, Wassenaar The Netherlands SSSV (inactive) edykhuis@wanadoo.nl G. Ellis Gary Halliburton USA Packers (revision) GaryD.Ellis@Halliburton.com G. Gillespie George Weatherford, Houston USA Sand Control George.Gillespie@weatherford.co Screen m B. Williams Benny Harbison-Fischer, Ft. Worth USA Sucker Rod bwilliams@hfpumps.com A. Freeman Austin Halliburton, Dallas USA Lockmandrel austin.freeman@halliburton.com (inactive) S. Noonan Shauna Conoco / Philips, Houston USA PCP part 1 (revision) Shauna.G.Noonan@conocophillip s.com D. McCalvin David Schlumberger, Houston USA PCP part 2 dmccalvin@slb.com E. Dijkhuis Bert BPEM, Wassenaar The Netherlands Beam Pump edykhuis@wanadoo.nl A. Freeman Austin Halliburton, Dallas USA SSSV system austin.freeman@halliburton.com (inactive) W. Mabry Wayne Schlumberger, Houston USA Gaslift equipment Wmabry@houston.oilfield.slb.com D. McCalvin David Schlumberger, Houston USA Barrier valve dmccalvin@slb.com (starting) Meeting schedule February 2008 May 2008 August 2008 November 2008 Houston, host Conoco Dallas, host Halliburton Houston, host BP Washington, host API