1602 Wall System. Optional Features Deep covers available Deep and heavy-weight mullions

Transcription

1 JULY, EC - Wall System FETURES Features Slim " (.) sight lines Tubular construction with shear block connections Split mullion unitized system for horizontal strip window Thermally improved framing Range of mullion sizes to suit design parameters Standard infill options /" (.) and " (.), other infills available Integrated entrance framing Two color option Permanodic TM anodized finishes in seven choices Painted finishes in standard and custom choices Optional Features Deep covers available Deep and heavy-weight mullions Kawneer Company, Inc., For specific product applications, Consult your Kawneer representative. DMDEN

2 Wall System LNK PGE JULY, EC - Kawneer Company, Inc., DMDEN

3 JULY, EC - Wall System INDEX rchitects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. PICTORIL VIEW... ELEVTION DETILS WITHOUT CKPN... ELEVTION DETILS WITH CKPN... ENTRNCE DETILS... CORNER DETILS... WLL ELEVTION ND DETILS... COMPONENTS... WIND LOD/DEDLOD CHRTS...- THERML CHRTS... - Kawneer Company, Inc., LWS ND UILDING ND SFETY CODES GOVERNING THE DESIGN ND USE OF GLZED ENTRNCE, WINDOW, ND CURTIN WLL PRODUCTS VRY WIDELY. KWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURTIONS, OPERTING HRDWRE, OR GLZING MTERILS, ND SSUMES NO RESPONSIILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. DMDEN

4 Wall System PICTORIL VIEW JULY, EC - Tubular mullions are horizontals with shear block construction. Rain screen pressure equalized system. Kawneer Company, Inc., DMDEN

5 JULY, EC - SCLE " = '-" Wall System ELEVTION ND DETILS (WITHOUT CK PN) Overall frame height ELEVTION IS NUMER KEYED TO DETILS Door opening width Door opening height " (.) -/" () -/" (.) Kawneer Company, Inc., -/" () -/" (.) " (.) HEVY WLL DMDEN

6 SCLE " = '-" Wall System ELEVTION ND DETILS (WITH CK PN) JULY, EC - ELEVTION IS NUMER KEYED TO DETILS " (.) -/" () -/" (.) " (.) -/" () -/" (.) HEVY WLL Kawneer Company, Inc., DMDEN

7 JULY, EC - SCLE " = '-" Wall System ENTRNCE DETILS /H OR O/P C/H ELEVTION IS NUMER KEYED TO DETILS DOOR JM UTT HUNG OR OFFSET PIVOT Kawneer Company, Inc., DOOR JM CENTER HUNG -/" (.) TYP TRNSOM R UTT HUNG OR OFFSET PIVOT WITH SURFCE CLOSER OR FLOOR CLOSER TRNSOM R CENTER HUNG CONCELED OVERHED OR FLOOR CLOSER DMDEN

8 SCLE " = '-" Wall System CORNER DETILS JULY, EC - VISION SPNDREL " (.) -/" (.) VISION OUTSIDE CORNER INSIDE CORNER SPNDREL SPNDREL VISION OUTSIDE CORNER SPNDREL VISION INSIDE CORNER Kawneer Company, Inc., DMDEN

9 JULY, EC - SCLE " = '-" TYPE HORIZONTL STRIP WINDOW Wall System WINDOW ELEVTION ND DETILS TYPE PUNCHED OPENING WINDOW Overall frame height Overall frame width ELEVTION IS NUMER KEYED TO DETILS Overall frame height Overall frame width ELEVTION IS NUMER KEYED TO DETILS -/" (.) -/" (.) Kawneer Company, Inc., " (.) -/" (.) " (.) " (.) NOTE: WINDOW CN LSO E FRICTED S STICK SYSTEM. DMDEN

10 Wall System COMPONENTS JULY, EC - SCLE " = '-" WLL MULLIONS (VERTICL ND HORIZONTL) " (.) -/" (.) -/" (.) -/" (.) " (.) /" (.) " (.) -/" (.) OPTIONL COVERS -/" (.) " (.) " (.) -/" (.) WITHOUT CKPN DPTORS Kawneer Company, Inc., DMDEN

11 JULY, EC - Wall System WIND LOD / DED LOD CHRTS WIND LOD CHRTS Mullions are designed for deflection limitations in accordance with M TIR- of L/ up to '-" and L/ +/" above '-". These curves are for mullions WITH HORIZONTLS and are based on engineering calculations for stress and deflection. llowable wind load stress for LUMINUM, psi (MPa), STEEL, psi (MPa). Charted curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load utilized in allowable stress design. conversion from Load Resistance Factor Design (LRFD) is provided. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of. per SCE/SEI. / increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. DEDLOD CHRTS Horizontal or deadload limitations are based upon /" (.), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for " (.) thick insulating glass or /" (.) thick glass supported on two setting blocks placed at the loading points shown. Kawneer Company, Inc., DMDEN

12 Wall System WIND LOD CHRTS JULY, EC - C D E SINGLE SPN.. llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () MULLION HEIGHT I =.(. x ) S =.(. x ) MULLION HEIGHT EQUL EQUL TWIN SPN..... C. D E SINGLE SPN TWIN SPN.. C D E MULLION HEIGHT MULLION HEIGHT EQUL EQUL..... C D Kawneer Company, Inc., I =.(. x ) S =.(. x ). E DMDEN

13 JULY, EC - Wall System WIND LOD CHRTS SINGLE SPN.. C D E MULLION HEIGHT llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () I =.(. x ) S =.(. x ) MULLION HEIGHT EQUL EQUL TWIN SPN C E D SINGLE SPN TWIN SPN Kawneer Company, Inc.,.. C D E MULLION HEIGHT I =.(. x ) S =.(. x ) MULLION HEIGHT EQUL EQUL.... C. D E. DMDEN

14 Wall System WIND LOD CHRTS JULY, EC - SINGLE SPN SINGLE SPN.. C D E MULLION HEIGHT I =.( x ) S =.(. x ).. C D E MULLION HEIGHT I =.(. x ) S = (. x ) SINGLE SPN.. C D E MULLION HEIGHT & llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () Kawneer Company, Inc., I =.(. x ) S =.(. x ) DMDEN

15 JULY, EC - Wall System DEDLOD CHRTS - / POINT LODING - / POINT LODING /" INFILL " INFILL.. I =.(. x ) S =.(. x ).. /" INFILL " INFILL Kawneer Company, Inc.,.. I =.(. x ) S =.(. x ).. DMDEN

16 Wall System DEDLOD CHRTS JULY, EC - /" INFILL - / POINT LODING - / POINT LODING.. I =.(. x ) S =.(. x ) /" INFILL " INFILL.. I = (. x ) S = (. x ).. Kawneer Company, Inc., DMDEN

17 JULY, EC - Wall System DEDLOD CHRTS - / POINT LODING - / POINT LODING /" INFILL " INFILL.. I =.(. x ) S =.(. x ).. Kawneer Company, Inc., /" INFILL " INFILL.. I =.(. x ) S =.( x ).. DMDEN

18 Wall System THERML CHRTS JULY, EC - Generic Project Specific U-factor Example Calculation (Percent of Glass will vary on specific products depending on sitelines) (ased on single bay of Curtain Wall/Window Wall) '-" '-" D.L.O. D.L.O. '-" Frame Width '-" D.L.O. Example Glass U-Factor =. tu/hr ft F Total Daylight Opening = (' x ') + (' x ') = ft Total Projected rea = '-" x '-" =. ft '-" Frame Height Percent of Glass = (Total Daylight Opening Total Projected rea) = (.) = % System U-Factor vs Percent of Glass rea. COG U-Factor EXMPLE (Not For Design) Kawneer Company, Inc.,. % Vision rea / Total rea % ased on % glass and center of glass U-Factor of. System U-Factor is equal to. tu/hr ft F DMDEN

19 JULY, EC - Note: Values in parentheses are metric. COG = Center of Glass. Charts are generated per MM Wall System THERML CHRTS System U-Factor vs Percent of Glass rea Kawneer Company, Inc., COG U-Factor Vision rea / Total rea % System U-Factor (tu/hr ft F) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values and are obtained from your glass supplier. DMDEN

20 Wall System THERML CHRTS JULY, EC - COG SHGC System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision rea Vision rea / Total rea % (Total Daylight Opening / Projected rea) System SHGC Charts are generated per M Visible Transmittance (VT) vs Percent of Vision rea COG VT Vision rea / Total rea % (Total Daylight Opening / Projected rea) System VT Kawneer Company, Inc., DMDEN

21 JULY, EC - Wall System THERML PERFORMNCE MTRIX (NFRC SIZE) Thermal Transmittance (TU/hr ft F) Glass U-Factor Overall U-Factor " GLZING WITH LUMINUM PRESSURE PLTE NOTE: For glass values that are not listed, linear interpolation is permitted.. U-Factors are determined in accordance with NFRC.. SHGC and VT values are determined in accordance with NFRC.. Glass properties are based on center of glass values and are obtained from your glass supplier.. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of mm wide by mm high (-/" by -/"). Kawneer Company, Inc., SHGC Matrix Glass SHGC Overall SHGC Visible Transmittance Glass VT Overall VT DMDEN

22 Wall System LNK PGE JULY, EC - Kawneer Company, Inc., DMDEN