HPS Monumental Sliding Doors
|
|
|
- Dora Riley
- 5 years ago
- Views:
Transcription
1 JANUARY, 2017 FEATURES 1 Features High performance ratings for structural, air infiltration and water resistance Meets AAMA performance class and grades of HC60, HC80, HC100 and HC120 Meets South Florida Building Code and SBCCI SSTD 12 for Small Missile Impact Resistance Forced Entry Resistance tested per AAMA Available as,,,, and configurations ptional vertical mullions for additional sidelites Accommodates 3/16", 7/32", 1/4", /16", 3/8", 1/2", 9/16", /8" and 1" infills ptional factory glazing (Sliding Panels nly) Heavy duty stainless steel casters Stainless steel track insert for sliding panels Stainless steel MS Hookbolt Lock ptional architectural finishes including anodized and applied coatings Interior or exterior insect screens
2 2 BLANK PAGE JANUARY, 2017
3 JANUARY, 2017 INDE 3 ELEVATINS...4 STANDARD DETAILS... thru 7 INSECT SCREENS / INFILL PTINS...8 HARDWARE PTINS...9 WINDLAD CHARTS...10 LAWS AND BUILDING AND SAFETY CDES GVERNING THE DESIGN AND USE F GLAZED ENTRANCE, WINDW, AND CURTAIN WALL PRDUCTS VARY WIDELY. KAWNEER DES NT CNTRL THE SELECTIN F PRDUCT CNFIGURATINS, PERATING HARDWARE, R GLAZING MATERIALS, AND ASSUMES N RESPNSIBILITY THEREFR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal
4 4 ELEVATINS JANUARY, 2017 ELEVATINS ARE NUMBER KEYED T DETAILS FIED SLIDE UNIT PP. SLIDE FIED 6 PP. 2 4 UNIT 3 1 PP. 3 FIED FIED UNIT SLIDE FIED SLIDE UNIT 1 3 FIED SLIDE SLIDE FIED PP. PP. FIED 9 PP UNIT
5 JANUARY, 2017 STANDARD DETAILS SCALE 3" = 1'-0' 6-3/32" (14.78) 2-2/32" (70.64) PERABLE HEAD (HC60/80/100/120) 3-3/32" (78.8) FIED HEAD (HC60) /32" (78.8) FIED HEAD (HC80/100/120) 3A 3-23/32" (94.46) 3-23/32" (94.46) 3-3/32" (78.8) 3-3/32" (78.8) 6-13/32" (162.72) PERABLE SILL (HC60/80/100) (HC120),, nly 2 PERABLE SILL (HC120) nly FIED SILL (HC60) 4 FIED SILL (HC80/100/120) 4A NTE: 9/16" INFILL SHWN. FR ADDITINAL GLAZING PTINS SEE PAGE 8. 2A
6 6 STANDARD DETAILS JANUARY, 2017 SCALE 3" = 1'-0" 1-1/4" (31.7) FIED JAMB (63.) INTERLCK STILE (HC60) 4-1/4" (109.9) LCK JAMB 6 7 1/8" (3.18) (63.) INTERLCK STILE (HC80/100) 6A (63.) INTERLCK STILE (HC120) 6B 1/8" (3.18) (63.) 3-1/4" (82.) (63.) 3-1/4" (82.) MEETING STILE (HC60/80) MEETING STILE (HC100/120) 8 8A
7 JANUARY, 2017 STANDARD DETAILS 7 SCALE 3" = 1'-0" 4-1/4" (109.9) LCK STILE MULLIN (HC60) 4-1/4" (109.9) LCK STILE MULLIN (HC80/100) 9 9A 2" 1" 4-1/4" (109.9) LCK STILE MULLIN (HC120) 2" 1" (63.) 9B 10 PTINAL MEMBERS FIED MULLIN HEAD RECEPTR ETERIR GLAZED HEAD RECEPTR INTERIR GLAZED NTE: Head Receptors cannot currently be used with Interior Screens.
8 8 INSECT SCREENS / INFILL PTINS JANUARY, 2017 SCALE 3" = 1'-0" ETERIR SCREENS HEAD INTERLCK LCK JAMB INSECT SCREEN HEAD SILL INSECT SCREEN NTE: Standard screen includes plated steel hardware. ptional screen available with stainless steel hardware. INTERIR SCREENS SCREEN WITH APPLIED CLSURE FR SCREEN LATCH INSECT SCREEN SILL INSECT SCREEN NTE: Also available with 3/16" and 7/32" infills. INTERLCK INFILL PTINS LCK JAMB NTE: Standard screen includes plated steel hardware. ptional screen available with stainless steel hardware. SCREEN WITH APPLIED CLSURE FR SCREEN LATCH 1/4" /16" 3/8" 1/2" 9/16" /8" 1"
9 JANUARY, 2017 HARDWARE PTINS 9 HARDWARE DESCRIPTIN AR MS 1847 LCK AR MS 180A-0 HKBLT (Interior) Extruded Pull with Thumbturn (Exterior) Extruded Pull with Applied Cylinder or Blank Extruded Pull (Interior) Extruded Pull with Thumbturn (Exterior) Blank Flush Pull (Interior) Full Length Extruded Pull with Thumbturn (on Lock Panel) (Exterior) Blank Flush Pull (Interior) Full Length Extruded Pull with Thumbturn (on Lock Panel) (Exterior) Blank Extruded Pull (Interior) Flush Pull with Slide perator (Exterior) Blank Flush Pull,,,,,, (Interior) Flush Pull with Slide perator (Exterior) Flush Pull with Cylinder,, (Interior) Blank Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Extruded Pull with Mortise Cylinder (Interior) Blank Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder (Interior) Full Length Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Extruded Pull with Mortise Cylinder (Interior) Full Length Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder,,,, (Interior) Dummy Flush Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder,,
10 10 WIND LAD CHARTS JANUARY, 2017 FR WINDLAD R DEADLAD INFRMATIN, PLEASE CNTACT YUR KAWNEER APPLICATIN ENGINEERING DEPARTMENT.
AA TM 3900 THERMAL SLIDING DOOR
OCTOBER, 2010 AA TM 3900 THERMAL SLIDING DOOR FEATURES 1 Features High performance ratings for structural, air infiltration, thermal efficiency and water resistance. Tested to applicable North American
1010 Sliding Mall Front
JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom
GLASSvent TM Windows for Storefront Framing
MARCH, 05 GLASSvent TM Windows for Storefront Framing INDEX PROJECT-OUT WINDOW... 3-8 OUTSWING CASEMENT WINDOW... 9-4 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
InFrame TM Interior Framing System
JANUARY, 2017 InFrame TM Interior Framing System FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8"
Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated
JULY, 2014 InFrame TM FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8" infill options Permanodic
350/500 HEAVY WALL TM IR ENTRANCES 1
JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top
350 IR ENTRANCES INDEX
50 IR ENTRANCES INDEX Hurricane Resistant Product PICTORIAL VIEW... IR 500 ENTRANCE FRAMING DETAILS... 4 IR 50 ENTRANCE FRAMING DETAILS... 5 TRIFAB VG 450 FRAMES / 600 WALL SUB-FRAMES...6 INFILL OPTIONS
FLUSHLINE ENTRANCES. Features
OCTOBER, 2006 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with a face sheet of fiberglass reinforced polyester (FRP) or aluminum, that is captured on four sides by integral extruded reglets
350/500 Heavy Wall TM IR Entrances
SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile
350/500 IR Entrances. Features
OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.
350/500 IR Entrances. Features
SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom
Flushline TM Entrances
FEATURES Hurricane Resistant Product Blast Mitigation Product 1 Features Flush appearance with face sheet of aluminum or fiberglass reinforced polyester (FRP) that is captured on four sides by integral
CONTENTS. Custom Entrances and Hardware
CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL
FOLDING GLASS WALL SYSTEMS
FOLDING GLASS WALL SYSTEMS SERIES SI3000 A seamless wall with endless possibilities. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations since their introduction
Finishes FINISHES DESIGNATIONS...2 PAINTED FINISHES...3, 4 STANDARD HARDWARE FINISH OFFERINGS...5, 6 JANUARY, 2017 EC INDEX
JANUARY, 2017 INDEX 1 FINISHES DESIGNATIONS...2 PAINTED FINISHES...3, 4 STANDARD HARDWARE FINISH OFFERINGS...5, 6 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW,
2820 Series 42" A.F.F. TO CENTER OF PULL HANDLE 34" TO CENTER OF LOCKSET. ENTRANCE-ARCADIA-NONTHERMAL-2820-ALL-SERIES.pdf
Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02 S\06 2820 \SERIES\ENTRANCE-ARCADIA-NNTHERMAL-2820-ALL-SERIES.DWG Detail: Vertical Stiles Scale: 6" = 1'-0" SHEET 1 F 8 Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02
CLEAR GLASS WALL SYSTEMS
PRODUCT DATA SHEET SERIES SI3000C CLEAR GLASS WALL SYSTEMS Clean, Uninterrupted Views Series SI3000C Clear Glass Walls eliminate vertical stiles, allowing for maximum transparency, natural daylighting,
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
STANDARD ENTRANCES TECHNICAL MANUAL
TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"
SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5
CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...
INSTALLATION INSTRUCTIONS
MARCH, 2009 PART NUMBER 590-500 1 INSTALLATION INSTRUCTIONS 2 INDEX MARCH, 2009 INSTALLATION INSTRUCTIONS CONTENTS These instructions show the general installation sequence and procedure for typical installation.
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
CLEAR GLASS WALL SYSTEMS
CLEAR GLASS WALL SYSTEMS SERIES SI3000C Clean, uninterrupted views. Series SI3000C Clear Glass Walls create a seamless wall with uninhibited views. Clear Glass Walls eliminate vertical stiles, allowing
KEY FEATURES HARDWARE ICON BI-FOLD OPERATOR
ICON BI-FOLD OPERATOR This swivel bi-fold operator throws locking bolts into the frame at top and bottom of the panel. Optional key-locking (separately installed) is available. Having an operator handle
OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
7.01. Door Hardware & Accessories
7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into
SCISSORS ARM OPERATOR
AWNING 22 For the window design that requires a face-mounted operator, Truth has developed a special version of our Awning Roto Gear perator that incorporates the case from our 22 Series perators with
Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow
Design Features INTRODUCTION SERIES 702 PERFORMANCE SlideMASTER SLIDING DOOR. Australian Registered Design
Design Features INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE This high performance sliding door has been tested for compliance with the relevant Australian Standards. Achieved a very high
VINYL-COMPOSITE SWING DOOR SYSTEMS
VINYL-COMPOSITE SWING DOOR SYSTEMS SERIES SI4000V Versatile entrances for any application. Solar Innovations now offers a line of upvc Vinyl-Composite Swing Doors. These doors are perfect for both commercial
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
Design Features : INTRODUCTION SERIES 704 ARCHITECTURAL SlideMASTER SLIDING DOOR. Australian registered design.
INTRODUCTION DATE DEC 07 REPLACES JUN 06 SCALE NOT TO SCALE Design Features : Series 704 has been designed as an internal sliding door that can be fabricated in numerous configurations: 'XF', 'FX', 'FXF',
FINISH GROUPS #17 GRP #17 CLEAR
EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
Product Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
Superior by Design. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Superior by Design. Euro PIVOT Door Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING STACKING PIVOT
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
LEADING WINDOW & DOOR SYSTEMS
intec LEADING WINDOW & DOOR SYSTEMS Wintec Aluminium Since our beginning in 1997, we have developed a range of window and door products that are innovative, functional and stylish. Wintec Aluminium windows
Architectural Information Page: Series 541 Sliding Door Introduction
Design Features Architectural Information Page: 71. 1 Introduction Date: Oct 04 Replaces: Aug 03 Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional
Guide Specification Section Interior Aluminum Doors and Frames
Guide Specification Section 08 11 16 Interior Aluminum Doors and Frames SECTION 08 11 16 The Sliding Door Company s door and frame system includes glazed swing doors, sidelights, transoms, and fixed panels
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
custom entrances and hardware
custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
2 AllSeasons Awning and Casement Windows
2 AllSeasons Awning and Casement Windows Summary Performance Awning Casement and Fixed windows Requirement Performance Comments Water and Air Pressure 455Pa 2130Pa 1000Pa 2300Pa Exceeds NZS 4211 2008 Weight
Technical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
182.1 INTRODUCTION SERIES 462 ARCHITECTURAL COMMERCIAL SLIDING WINDOW. Design Features : Australian Registered Design.
INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : The 26mm thick heavy duty sliding window sashes have been fitted into custom head and sill and jamb inlay adaptor that snaps
Product Presentation
2016 Product Presentation DOOR SILLS Inswing Door Sills Entry and Patio WEATHER RESISTANT Solid foam PVC base provides added thermal resistance (thermally-broken) Non-rot, water and termite resistant Closed-cell
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355
GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS GAMCO CATALOG 131-10 Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS TABLE OF
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
Built to Order. Stiles. StileLine. Steel Storefront. Features. Glass. Finishing. Section Contents
Stiles Steel Door + Window Systems Steel Storefront Section Contents Tuck Glazed System SF-1.0 Flush Glazed System SF-2.0 Structural Glazed System SF-3.0 Pressure Glazed System SF-4.0 Operable Vents SF-5.0
SLIDING DOOR LOCKS MISCELLANEOUS
MISCELLANEOUS SLIDING DOOR We offer the BEST delivered prices on this NEW pocket door hardware of any dealer, big discounts off the MSRP prices listed here. Give us a call toll free at (888) 3062298 or
Guide Specification Section Interior Suspended Sliding Glass Doors
Guide Specification Section 08 32 13 Interior Suspended Sliding Glass Doors SECTION 08 32 13 The Sliding Door Company s product combines operable sliding glass doors with stationary glazed panels to create
PD5000 Sliding/Pocket Door Locks
PD5000 Sliding/Pocket Door Locks Application For residential or commercial application Material Lockcase: Heavy Gauge Steel Deadbolt and Edge Pull: Brass and Stainless Steel Faceplate and Strike: Stainless
INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
COMMERCIAL SOLUTIONS. Commercial door solutions
COMMERCIAL SOLUTIONS Commercial door solutions Commercial doors Marvin Commercial Doors combine the warmth and beauty of wood with the rugged durability of heavy-duty construction to provide excellent
Atrium Patio Door Field Service Manual
Atrium Patio Door Field Service Manual December 2005 Table of contents Service Agreement Pg 2 Release Agreement Pg 5 Inspection form Pg 6 Warranty Pg 8 Replacing swing panel Pg 12 Replacing sliding panel
MISCELLANEOUS SLIDING DOOR LOCKS
MISCELLANEOUS SLIDING DOOR SANTA MONICA LARGE SET* PD005.xxx.ENTR Entry set with 2.5" backset lock* Set PD005.xxx.PRIV Privacy set with 2.5" backset lock Set 585 640 PD005.xxx.PASS Passage/dummy set with
Lift & Slide W6400. (rev )
Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.
1602 Wall System. Optional Features Deep covers available Deep and heavy-weight mullions
JULY, EC - Wall System FETURES Features Slim " (.) sight lines Tubular construction with shear block connections Split mullion unitized system for horizontal strip window Thermally improved framing Range
2.01 Standard Entrances Description
2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed
MIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California
MIAMI-DADE COUNTY PERFORMANCE TEST REPORT This report contains in its entirety: Cover Page: 1 page Report Body: 14 pages Sketch: 1 page Drawings: 5 pages Report No.: E8384.03-301-18 Rendered to: FLEETWOOD
ASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California
This report contains in its entirety: Cover Page: 1 page Report Body: 11 pages Sketch: 1 page Drawings: 5 pages ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E8384.02-301-18 Rendered to: FLEETWOOD
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
SovereignSeries. SovereignSeries
2 SovereignSeries Overview 21 Awning and Casement Windows 22 Sliding and Stacking Windows and Doors 32 inged Doors 50 Bi-fold and Inline Bi-fold Windows and Doors 62 SovereignSeries 2 SovereignSeries
Entry Mortise Handleset
1. Pencil 2. No. 2 and No. 3 Phillips Head Screwdrivers 3. No. 1 and No. 2 Slotted Screw Drivers 4. 1/8" Allen Head Wrench 5. 3/4" Wood Chisel or Corner Chisel 6. Measuring Device 7. Lock Mortising Tool
MultiSlide Doors. Seamless Indoor/Outdoor Spaces. Nelson Cabin - courtesy Stefan Hampden of CAST architecture
MultiSlide Doors Seamless Indoor/Outdoor Spaces Nelson Cabin - courtesy Stefan Hampden of CAST architecture MULTISLIDE DOORS Contemporary Look Sliding Doors Loewen MultiSlide MultiSlide doors provide large
Masonite Steel Entry Doors
Masonite Steel Entry Doors STEEL ENTRY DOORS Masonite HD High-Definition Steel Doors Masonite Metal-Edge Steel Doors Masonite Wood-Edge Steel Doors PREMVU Wood-Edge Steel Flush-Glazed Doors Masonite Steel
.crealco Interlockers & Meeting Stiles Limitation Chart Cross Sectional Detail Sidelight Bottom Rail Assembly of Side Light Adaptor
. crealco E L I T E ELITE HORIZONTAL PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: November 2013 . crealco E L I T E INDE Legal Disclaimer 3 Profile Identification 4 Hardware Identification
Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels
Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER
Models 7008, 7034, 7035, 7035R & 7041 Planar Blind-Mate Connectors, dc to 40.0 GHz
Mdels 7008, 7034, 7035, 7035R & 7041 Planar Blind-Mate Cnnectrs, dc t 40.0 GHz Threadless Cnnectr System / S pace Saving / L ng Life Features Threadless Cnnectr Mating - This blind-mate cnnectr series
20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty
These door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16" 1/4"- 20
Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified. Hold open arms are not permitted on fire doors. Sex-bolts may be required for wood or plastic faced fire
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors
where ideas unfold brio.com.au Brio 6000 Mortice Lock Series Locking solutions for sliding & folding doors About us Brio, based in Australia, is focused on bringing adventurous architectural ideas to life,
Wood Facade Systems. Made in the U.S.A. Curtain Walls Skylights & Structures Doors & Windows.
Wood Facade Systems by Solar Innovations, Inc. Single Source Supplier of Wood and Aluminum Products Where Sustainability Meets Innovation Curtain Walls Skylights & Structures Doors & Windows Made in the
Heavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
SECTION FOLDING GLASS PANEL PARTITIONS
SECTION 10 22 26.35 FOLDING GLASS PANEL PARTITIONS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY, MOUNTING BRACKETS, MOUNTING
INTRODUCING NEW SIZES FOR MARVIN DOORS
INTRODUCING NEW SIZES FOR MARVIN DOORS 12 REASONS WHY MARVIN DOORS ARE A SUPERIOR VALUE 1. NEW SIZES PERFECT FOR REMODELING AND REPLACEMENT. With 27 new sizes perfect for remodeling and replacement projects,
GENERAL INSTALLATION GUIDELINES
1551 MT. ROSE AVENUE YORK PA 17403-2909 (717) 849-8100 GENERAL INSTALLATION GUIDELINES For Receptor Systems Approved 9/29/2017 Installation Guideline Disclaimer This document contains general installation
GENERAL INSTALLATION GUIDELINES
1551 MT. ROSE AVENUE YORK PA 17403-2909 (717) 849-8100 GENERAL INSTALLATION GUIDELINES For Receptor Systems Approved 08/31/2018 Installation Guideline Disclaimer This document contains general installation
2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction
Design Features Architectural Information Page: 22. 1 Standard Wrap Around Sash Introduction Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional mullion
Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad. Carmel Double Hung
Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad window is a true aesthetic beauty. No visible PVC jambliners to mar the beauty of the
ARCHITECTURAL STICK SYSTEMS
ABOUT THE STICK SYSTEMS: The Steelcraft Architectural Stick Systems are designed to fit virtually all construction requirements for commercial building applications. These frame assemblies are fabricated
Pivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
ENTRY DOOR TEST REPORT. Rendered to: The Vistawall Group
ENTRY DOOR TEST REPORT Rendered to: The Vistawall Group Product: Single 500 Wide Stile Outswing Full-Lite Aluminum Entry Door w/ Standard TH-43 Threshold and Woolpile Weathering Title Air Infiltration@
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1
Izerwaren Order number 51.004 Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1 Flush Door Lever Handle, for use with entry set with Profile Cylinder 304 Stainless Steel 100
NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions
NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls
Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates