FINISH GROUPS #17 GRP #17 CLEAR

Size: px
Start display at page:

Download "FINISH GROUPS #17 GRP #17 CLEAR"

Transcription

1 EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER AND OFFSET PIVOT ARM ASSEMBLIES... A3/6 LCN CONCEALED OVERHEAD CLOSERS... A3/7 A3/8 LOW ENERGY OPERATOR (FOR ADA 1 )... A3/9 GROUP NO. DESIGNATION FINISH GROUPS FINISHES INCLUDED #17 GRP #17 CLEAR #40 GRP #40 BRONZE #22 STD. PAINT #14 CLEAR #29 GRP #29 BLACK #18 CHAMPAGNE #26 LIGHT BRONZE #28 MEDIUM BRONZE NOTICE! Laws and building safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operation hardware, or glazing materials, and assumes no responsibility therefore. It is responsibility of the owner, the architect, and the installer to make these selections in strict conformity to all applicable laws and building codes. * te: For hardware not listed in the price catalogue, consult estimating! te: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations. 1 Americans with Disabilities Act

2 A3/2 SURFACE MOUNTED CLOSERS EFFECTIVE FEBRUARY 1, 2018 tes: 1. Closers are painted to match Kawneer Anodized finishes of #17, #29 and # rton 1601BF and 8101 series closers meet ADA interior opening force requirements. Falcon Surface Closer (For offset pivot or butt hung doors) Model Number Description Kawneer Part Number SC60 Standard Arm Hold Open Arm Accessory & replacement items for Falcon closers. SC60 Parallel Arm Plate rton 1600 Surface Closer (For offset pivot and butt hung doors) Model Number 1600 (Adjustable) rton 8100 Surface Closer (For offset pivot and butt hung doors) Accessory & Replacement Items for rton Closers (2) Drop Plate Adaptor Plate for Parallel Arms Doors Corner Bracket Soffit Plate 8101 (Adjustable) 8101 (Cover) Hold Open Part Number (Adjustable 1-6) Parallel Arm Hold Open Arm Hold Open Arm Soffit Plate Hold Open Regular Arm X-length Arm for Frames 5" to 7-1/2" X-length Arm for Frames 7-1/2" to 9-1/2" Regular Arm X-length Arm for Frames 5" to 7-1/2" $ $ X-length Arm for Frames 7-1/2" to 9-1/2" For Series For Series $26.00 $29.00 $45.00 $14.00 $14.00 $45.00 $50.00 $57.00 $72.00 $76.00 $83.00 (2) Accessories are finished to match Kawneer anodized finishes of #17, #29, and #40. Specify finish at time of ordering.

3 EFFECTIVE FEBRUARY 1, 2018 tes: 1. Closers are painted to match Kawneer Anodized finishes of #17, #29 and # LCN series closers meet ADA interior opening force requirements. SURFACE MOUNTED CLOSERS A3/3 LCN 1260 Surface Closer (For offset pivot or butt hung doors) Model Number Hold Open Kawneer Part Number Description 1260 LCN Catalog Number Adaptor plate required for top jamb applications with flush ceiling Adaptor plate required for all parallel arm applications PA Optional cover (plastic) Kawneer Part Number $ $ Retro fit kit QF LCN 4040XP Surface Closers Maximum Door Width 3'0" to 4'0" Adaptor Plates (Select one) Adjustable Hold Open Range Maximum Swing LCN Catalog. ne XP to XP-3071 Used on all frame mounted closers with transoms. Used on all swing door mounted closers with transoms. (Requires blade stop spacer) Used on frame mounted closers without transoms (350 & 500 doors only). Used on all outswing 190 doors without transoms and other parallel arm applications. (Requires blade stop spacer) Blade Stop Spacer (Required with and PA) TJ G PA Kawneer Part List $

4 A3/4 CALIBRE TM CLOSERS EFFECTIVE FEBRUARY 1, 2018 Calibre TM Concealed Overhead Closers (3)(4)(5) tes: 1. Pivoting hardware not included. 2. Closers S/A offset arm application are available with no hold open or 105 hold open only. 3. When using closer in a S/A offset arm application, doors not to exceed 3'6" in width, doors exceeding 27 square feet in size should be reviewed by application engineering. Maximum Door Size Interior (3) 2'6" x 8'0" 3'6" x 8'0" 4'0" x 8'0" Spring Type Hold Open Part. Extra Light Light Medium Heavy $ Reference chart for approximate opening forces te: For retrofit applications of pre 6/98 Husky closers, refer to service parts. (5) Use for interior applications only. t to be used for exterior applications. (4) On center pivot applications the COC closer will allow the door to swing 105, for applications with back to back CP push bars, heavy traffic or high winds, the use of an additional door stop is recommended. (5) With transom only Approximate COC and s These forces are approximate and may vary depending on project conditions and installation. Center Pivot Double Acting Single Acting Offset Arm 3' Door Width 3'-6" Door Width 4'-0" Door Width 3' Door Width 3'-6" Door Width 4'-0" Door Width Heavy 15 lbs. 9 lbs. 13 lbs. 7-1/2 lbs. 11 lbs. 7 lbs. 17 lbs. 10 lbs. 14-1/2 lbs. 8-1/2 lbs. N/A N/A Medium 12 lbs. 7 lbs. 10 lbs. 6 lbs. 9 lbs. 5-1/2 lbs. 14 lbs. 8-1/2 lbs. 12 lbs. 7-1/2 lbs. N/A N/A Light 9 lbs. 5-1/2 lbs. 8 lbs. 5 lbs. 7 lbs. 4 lbs. 11 lbs. 6-1/2 lbs. 9-1/2 lbs. 6 lbs. N/A N/A Extra Light 7 lbs. 4-1/2 lbs. 6 lbs. 3-1/2 lbs. 5 lbs. 3 lbs. 8-1/2 lbs. 5 lbs. 7-1/2 lbs. 4-1/2 lbs. N/A N/A Closer Sizing te: All closer sizing recommendations are based on average conditions. Oversize doors, doors with heavy infill or doors that may be subjected to high wind conditions or stack pressures, may require larger size closers. Closers that are sized and adjusted to meet reduced opening force requirements, may not have sufficient power to reliably close and latch exterior doors. Refer to low energy operators on page A3/9 for power assist operators to meet reduced opening force requirements without affecting closing power.

5 EFFECTIVE FEBRUARY 1, 2018 INTERNATIONAL CONCEALED CLOSERS A3/5 International Concealed Overhead Closers (5)(7) tes: 1. All closers have 105 deadstop. 2. Pivoting hardware not included. 3. When using SA-INT application, order (1) size smaller closer than normal. Maximum Door Size Spring Type Hold Open Part. Interior (6) Light $ Interior 2'6" 3'0" 3'6" Medium Light Medium Heavy (4) On center pivot applications the COC closer will allow the door to swing 105. For applications with back to back CP push bars, heavy traffic or high winds, the use of an additional door stop is recommended. (5) With transom only. (6) Use for interior applications only. t to be used for exterior applications. Meets ADA opening force requirements for interior doors. (7) Closer sizing note: All closer sizing recommendations are based on average conditions. Oversize doors, doors with heavy infill or doors that may be subjected to high wind conditions or stack pressures, may require larger size closers. Closers that are sized and adjusted to meet reduced opening force requirements, may not have sufficient power to reliably close and latch exterior doors.

6 A3/6 CONCEALED CLOSER AND OFFSET PIVOT ARM ASSEMBLIES EFFECTIVE FEBRUARY 1, 2018 te: 1. s for hardware listed are per item prices I.E. select (2) S/A offset arm closer arms for a pair of doors. Arm for Center Pivoted Concealed Closers (8) Arm for Offset Concealed Closers (5) Center Pivoted Arm & Clamping Block Assy. (Select Calibre TM or international concealed overhead closer separately) Single Acting Offset Arm (Select Calibre TM or international concealed overhead closer separately) Part. End load arm package (ship loose) $40.00 End load hardware + door prep (applied) Frame prep Side load arm package (ship loose) Side load hardware + door prep (applied) Frame prep Part. includes: 1. Track, shock absorber and arm. All shipped loose. Preparation for arm and track for doors, when selected. 2. For single acting applications door is prepped per Kawneer's layout, not the international template. 3. Frame preparation pricing number includes: closer header/transom preps, filler plate, door stop with preps and frame/door accessory assemblies. See A2 section transom header framing base price for per foot pricing. te: Closers with S/A offset arm application are available with no hold open and 105 hold open only. (5) With transon only. (8) t applicable with InFrame interior framing. Offset arm package (ship loose) $75.00 Hardware + door prep (applied) Frame prep Door prep only

7 EFFECTIVE FEBRUARY 1, 2018 LCN CONCEALED OVERHEAD CLOSERS A3/7 LCN Concealed Closers (9) Pricing information: 1. Specify degree of hold open. 2. Pivoting hardware not included. 3. Closers are for use with Kawneer standard butt, offset pivots and continuous hinges used on rabbeted stiles (for other butts, offset pivots or continuous hinges, consult factory for pricing.) 4. Preparation charges do not include header or transom bar moldings. 5. Door widths shown below are for exterior doors. Interior applications may require lighter closers. LCN 2030 Series (Concealed Arm) (5) For 1-3/4" x 4" (minimum) header or transom bar requires minimum 1-3/8" web depth door top rail. Maximum Door Width Up to 3'6" Hold Open LCN Catalog. Hand of Closer Kawneer Part H R.H. L.H. R.H. L.H $1, , LCN 2030 Prep Charge Part. Door Prep $ Frame Prep (5) With transon only. (9) Door Stop Recommendations For LCN 2030 Auxiliary stop is recommended where a door cannot swing 180. Optional track bumper assembly assists backcheck in cushioning the opening swing of the door. It is not intended to replace an auxiliary stop. Concealed Overhead Closer Transom Bar Header (price per foot) (8) Fabricated Framing Systems: Part. #17 GRP #40 GRP #29 GRP Trifab VG 400 (Center Plane) Trifab VG 450 (Center Plane) Trifab VG 451 (Center Plane) InFrame (Center Plane) (8) t applicable with InFrame interior framing.

8 A3/8 LCN CONCEALED OVERHEAD CLOSERS EFFECTIVE FEBRUARY 1, 2018 LCN Concealed Closers (10) Pricing information: 1. Specify degree of hold open. 2. Pivoting hardware not included. 3. Closers are for use with Kawneer standard butt, offset pivots and continuous hinges used on rabbeted stiles (for other butts, offset pivots or continuous hinges, consult factory for pricing.) 4. Special arm required for 2" thick doors. Select appropriate closer part number from 2" door column. 5. Preparation charges do not include header or transom bar moldings. 6. Door widths shown below are for exterior doors. Interior applications may require lighter closers. LCN 5030 Series (Exposed Arm) (5) For 1-3/4" x 4-1/2" (minimum) or 2" x 4-1/2" header or transom bar requires minimum 1-3/8" web depth door top rail. Maximum Door Width Up to 3'0" Up to 3'6" Up to 4'0" Hold Open LCN Catalog. Hand of Closer 5034 R.H L.H H R.H H L.H R.H L.H H R.H H L.H R.H L.H H R.H H L.H. Kawneer Part. (Std. 1-3/4" Dr.) Kawneer Part. (2" Door) LCN 5030 Prep Charge Part. (5) With transon only. (10) Door Stop Recommendations For LCN 5030 Auxiliary stop is recommended at hold-open point or where the door cannot swing 180. Frame Prep $ $1, , , , , ,225.00

9 EFFECTIVE FEBRUARY 1, 2018 LOW ENERGY ASSISTED CLOSER (ADA 1 ) A3/9 Low Energy Power Assisted Closer (8) Ordering information: 1. Closers are for use with Kawneer standard butt hinges, offset pivots and continuous hinges. 2. Closers are non-handed. 3. Consult table below for transom bar and header information 4. Clear anodized closer covers are suggested for painted and black anodized frames. 5. Consult factory for black anodized and painted cover availability. 6. Standard finish for closer arms in black anodized. 7. Electrical work to be provided by licensed electrical contractor. 8. Conduit, connectors and wiring are not included. Low Energy Operator Includes: operator unit with power switch, mounting base, anodized cover and black painted end caps. (Order mounting screws below) Outswing Arm (Std.) For 0" to 4-13/16" reveal. Includes: arm (black finish only). Part $2, Outswing Arm (Deep) For 4-1/8" to 9-7/8" reveal. Includes: arm (black finish only) closer spindle with screw Inswing Arm (Std.) Includes: arm (black finish only), slide track (clear anodized only), closer spindle with screw. Wireless Receiver Includes: receiver (ship loose) Push-button Switch Includes: switch & mounting screws. For hard wire and remote transmitter use (shipped loose) Surface Box with Transmitter Includes: box mounting screws. For use with , requires 9 volt battery (not included). (shipped loose). Closer Mounted Package Includes: mounting screws. For mounting closer base to frame (shipped loose). Transom Bar/Header for Low Energy Operator 1. Reinforced transom bar header is recommended for low energy operator applications. 2. includes frame joinery prep for selected framing system. Shear blocks are included. 3. Operator to frame attachment is field drilled to template. Order mounting screws above. 4. Frame jamb preparation charges for jambs are not included see section A2. Transom Bar Header (price per foot) Applicable glass stops are included. 6. Perimeter fasteners or preparation for perimeter fasteners is not included. 7. Assembly of framing is not included. Framing is factory fabricated and shipped K.D. 8. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger loot), add the frame preparation charges for any options required. Fabricated Framing Systems: Part. #17 GRP #40 GRP #29 GRP Trifab VG 450 (Center Plane) Trifab VG 451/451T (11) (Center Plane) (11) n-thermal door jambs and T-Bars are standard application for immediate door frames (8) t applicable with InFrame interior framing. Wire Access Fabrication Charge One charge per operator

10 A3/10 BLANK PAGE EFFECTIVE FEBRUARY 1, 2018 THIS PAGE LEFT INTENTIONALLY BLANK

SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5

SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...

More information

CONTENTS. Custom Entrances and Hardware

CONTENTS. Custom Entrances and Hardware CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL

More information

350/500 HEAVY WALL TM IR ENTRANCES 1

350/500 HEAVY WALL TM IR ENTRANCES 1 JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top

More information

350/500 Heavy Wall TM IR Entrances

350/500 Heavy Wall TM IR Entrances SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile

More information

InFrame TM Interior Framing System

InFrame TM Interior Framing System JANUARY, 2017 InFrame TM Interior Framing System FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8"

More information

Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated

Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated JULY, 2014 InFrame TM FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8" infill options Permanodic

More information

350 IR ENTRANCES INDEX

350 IR ENTRANCES INDEX 50 IR ENTRANCES INDEX Hurricane Resistant Product PICTORIAL VIEW... IR 500 ENTRANCE FRAMING DETAILS... 4 IR 50 ENTRANCE FRAMING DETAILS... 5 TRIFAB VG 450 FRAMES / 600 WALL SUB-FRAMES...6 INFILL OPTIONS

More information

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom

More information

s tops & holder s Absolute Door Control and Entire Opening Protection

s tops & holder s Absolute Door Control and Entire Opening Protection check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or

More information

1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6

1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com

More information

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED

More information

These door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16" 1/4"- 20

These door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16 1/4- 20 Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified. Hold open arms are not permitted on fire doors. Sex-bolts may be required for wood or plastic faced fire

More information

Table of Contents Holders & Stops

Table of Contents Holders & Stops Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,

More information

ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models

ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models 9500 Series Installation Instructions Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models Regular Pages 5 & 6 Parallel Pages 7 & 8 Top Jamb Mount Pages 9 & 10 IMPORTANT: An improperly installed or

More information

400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages

400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting

More information

custom entrances and hardware

custom entrances and hardware custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES

More information

ASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR:

ASSA ABLOY. Model W91 Overhead Concealed Wood Frame Installation Instructions IMPORTANT: BEFORE INSTALLING: TO DETERMINE HAND OF YOUR DOOR: Model W91 Overhead Concealed s Wood Frame Installation Instructions *Butt or 3/4 Offset Pivot Hung, Multi Sized 1-3, 3-6 Non-Hold Open and Hold Open Models *Other means except 4-1/2" x 4-1/2" or 3/4" offset

More information

Door Closers. General Information

Door Closers. General Information General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other

More information

Overhead Concealed Closers

Overhead Concealed Closers Overhead Concealed Closers Introduction Rixson Overhead Concealed closers offer an aesthetically appealing way to close a door. In situations where a closer is needed but concealment is required, Rixson

More information

INSTRUCTIONS FOR 1431 Door Closer with Hold Open Arms 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6

INSTRUCTIONS FOR 1431 Door Closer with Hold Open Arms 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 INSTRUCTIONS FOR Door Closer with Hold Open Arms SERIES ADJUSTABLE FROM SIZE THRU 6 FOR INSTALLATION ASSISTANCE CALL SARGENT AT -800-77-77 / www.sargentlock.com Installation Instructions based on Application

More information

FLUSHLINE ENTRANCES. Features

FLUSHLINE ENTRANCES. Features OCTOBER, 2006 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with a face sheet of fiberglass reinforced polyester (FRP) or aluminum, that is captured on four sides by integral extruded reglets

More information

DC3210. Recommended Closer Size

DC3210. Recommended Closer Size Installation Instructions For Non-Hold Open or A Hold Open Arm Option DC3200 Series Multi-Sized thru 6 Regular Arm Universal Door Closers Parallel Arm Jamb Mount See pages 2&3 See pages 4&5 See pages 6&7

More information

Senior Swing. Caution

Senior Swing. Caution *740132* 740132 2800 Overhead Concealed Series 9500 Surface Applied Series Senior Swing Installation Instructions Caution LCN Senior Swing The Senior Swing Power Operator System is a low energy product

More information

Checkmate Stops & Holders

Checkmate Stops & Holders Checkmate Stops & Holders TABLE OF CONTENTS introduction Sit moluptatur, ut quae dolorro et eatia quam, tecesed igendam, autemolor sunt. Ucil isi doloreium fugia doluptae ipsunt evellab orehenti debissi

More information

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow

More information

Table of Contents Holders & Stops

Table of Contents Holders & Stops Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590

More information

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary

More information

INSTALLATION INSTRUCTIONS Frames and Entrance Doors

INSTALLATION INSTRUCTIONS Frames and Entrance Doors INSTALLATION INSTRUCTIONS Frames and Entrance Doors J 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com A Division of Coral Industries, Inc. FRAMES and ENTRANCES

More information

STANDARD ENTRANCES TECHNICAL MANUAL

STANDARD ENTRANCES TECHNICAL MANUAL TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"

More information

316R Series Installation Instructions

316R Series Installation Instructions 316R Series Installation Instructions Multi size 1 thru 6 Non hold open closers CAUTION An incorrectly installed or improperly adjusted closer can cause property damage or personal injury. These instructions

More information

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B) SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets

More information

Storefront Installation Guide INSTALLATION INSTRUCTIONS

Storefront Installation Guide INSTALLATION INSTRUCTIONS STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.

More information

Pivots / Padlocks / Hasps

Pivots / Padlocks / Hasps / Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,

More information

Swing Door Installation Manual

Swing Door Installation Manual Manual 20D/35D/50D 20DH/35DH 40M/50M 25FD 35XT 50XT 01-4000-03 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes.......................................

More information

Door Controls. Table of Contents

Door Controls. Table of Contents Door Controls Hager Companies offers a comprehensive line of door control products designed and manufactured to meet a wide range of applications and uses. From humble beginnings in 1849 as a forger of

More information

351 DOOR CLOSER WITH DOUBLE LEVER ARM (OP) INSTALLATION INSTRUCTIONS

351 DOOR CLOSER WITH DOUBLE LEVER ARM (OP) INSTALLATION INSTRUCTIONS 2 351 DOOR CLOSER WITH DOUBLE LEVER ARM (OP) INSTALLATION INSTRUCTIONS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary door

More information

Flushline TM Entrances

Flushline TM Entrances FEATURES Hurricane Resistant Product Blast Mitigation Product 1 Features Flush appearance with face sheet of aluminum or fiberglass reinforced polyester (FRP) that is captured on four sides by integral

More information

800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door.

800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door. 800 SERIES Heavy-Duty Commercial Grade 1 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer

More information

Electrical Power Transfer Products

Electrical Power Transfer Products Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge

More information

Aluminum Continuous Geared Hinges

Aluminum Continuous Geared Hinges Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge

More information

GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355

GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS GAMCO CATALOG 131-10 Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS TABLE OF

More information

Illustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty.

Illustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty. Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. Exterior Glazed Back Members for 1" Glass Illustration Part Description Base List Weight/ Ft./ Box Price/S.L. S.L. S.L. Qty.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.

More information

Thermally Broken Framing and Door Installation

Thermally Broken Framing and Door Installation INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

AUTOMATIC OPERATOR ACTUATORS & ACCESSORIES

AUTOMATIC OPERATOR ACTUATORS & ACCESSORIES AUTOMATIC OPERATOR ACTUATORS & ACCESSORIES 8310 Series 4-1/2 Surface and Flush mounts The actuators and accessories on the following pages are to be used with LCN automatic operators. When using actuators

More information

2.01 Standard Entrances Description

2.01 Standard Entrances Description 2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed

More information

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE. FOR ASSISTANCE,

More information

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls

More information

CRL JACKSON 900 SERIES

CRL JACKSON 900 SERIES INSTALLATION INSTRUCTIONS CRL JACKSON 900 SERIES FLOOR MOUNTED DOOR CLOSERS CENTER HUNG AND OFFSET crlaurence.com crlaurence.com MODEL No. 990 crlaurence.com Phone: (800) 421-6144 Fax: (800) 262-3299 crlaurence.com

More information

Heavy-Duty Floor Closers

Heavy-Duty Floor Closers Complete Premium Door Control Concealed Closers for Maximum Efficiency, Heavy and High Traffic Openings General Information Introduction Floor closers provide the best mechanical means to support and control

More information

TS93 STH. Surface applied door closer. Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH)

TS93 STH. Surface applied door closer. Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH) Surface applied door closer Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH) TABLE OF CONTENTS Closer overall Technical specifications Door template Size

More information

GLASSvent TM Windows for Storefront Framing

GLASSvent TM Windows for Storefront Framing MARCH, 05 GLASSvent TM Windows for Storefront Framing INDEX PROJECT-OUT WINDOW... 3-8 OUTSWING CASEMENT WINDOW... 9-4 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,

More information

1010 Sliding Mall Front

1010 Sliding Mall Front JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom

More information

SECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR

SECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section describes

More information

PRODUCT DATA CATALOG

PRODUCT DATA CATALOG PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS

More information

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard

More information

Regular Arm Installation. Closer mounts on hinge side of door (pull side) See Page 3. Closer cover not shown. Top Jamb Installation

Regular Arm Installation. Closer mounts on hinge side of door (pull side) See Page 3. Closer cover not shown. Top Jamb Installation UNIVERSAL HARDWARE CLOSER UH61 & UH62 STALLATION STRUCTIONS The Professional s Choice MULTI SIZE 1 THRU 6 NON HOLD OPEN CLOSER CAUTION! An incorrectly installed or improperly adjusted door closer can cause

More information

SWINGING SCREEN DOOR FIELD INSTALLATION INSTRUCTIONS

SWINGING SCREEN DOOR FIELD INSTALLATION INSTRUCTIONS SWINGING SCREEN DOOR FIELD INSTALLATION INSTRUCTIONS TABLE OF CONTENTS 1: Measuring the Opening for the Storm Door... 4 2: Securing Storm Door Hinge Side Frame into Door Frame... 6 3: Securing Storm Door

More information

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.

.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation

More information

PRODUCT DATA CATALOG

PRODUCT DATA CATALOG PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS

More information

Installation Instructions. Installation Type

Installation Instructions. Installation Type Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED

More information

New RAPID Ship Inventory

New RAPID Ship Inventory New RAPID Ship Inventory Reduce Transit Time & Shipping Cost By Location January 2019 IDC West or IDC East Warehouse West Warehouse Territory East Warehouse Territory West Warehouse: Anaheim, CA 800-544-4422

More information

SECTION SWINGING AUTOMATIC ENTRANCES

SECTION SWINGING AUTOMATIC ENTRANCES SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO IR/DOR-O-MATIC SENIOR SWING & ASTRO SWING OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section

More information

BioPrism Solid Surface

BioPrism Solid Surface Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from

More information

Installation Instructions. Installation Type

Installation Instructions. Installation Type Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED

More information

Universal ARCOS EA. Patch Fittings

Universal ARCOS EA. Patch Fittings Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings

More information

5200 Series Door Closer Installation Instructions

5200 Series Door Closer Installation Instructions 5200 Series Door Closer I-C00187 R2 Regular Arm See Page 2 An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These installation instructions should

More information

Installation Manual for Metal Toilet Partitions Standard Series

Installation Manual for Metal Toilet Partitions Standard Series For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations

More information

Section 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

C-Series & S-Series Classic Frame with Transom (Single or Pair)

C-Series & S-Series Classic Frame with Transom (Single or Pair) 1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on

More information

*18758* 2030 Series. 1 Installation. 2 Adjustment. 3 Hold Open Information BACKCHECK. * Hold open tracks. Installation Instructions

*18758* 2030 Series. 1 Installation. 2 Adjustment. 3 Hold Open Information BACKCHECK. * Hold open tracks. Installation Instructions 18758 18758 No maintenance required. 2035 EN 4 1 Installation 1a The hand of the door and the closer must be the same. RH or LH will be stamped on the mounting plate. See the proper template for your application.

More information

Series 406 storefront. Installation Instructions

Series 406 storefront. Installation Instructions Series 406 storefront Installation Instructions Part NO. Y016 February 2013 Series 406 Installation Instructions TABLE OF CONTENTS Section I GENERAL NOTES Page 1 II PARTS IDENTIFICATION Page 2-3 III FABRICATION

More information

MINIMALIST DOOR FRAMES

MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality

More information

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED

More information

Stainless Steel Continuous Hinges

Stainless Steel Continuous Hinges Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the

More information

MINIMALIST DOOR FRAMES

MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality

More information

SCI-FAB Product Specifications. Casework Section 1. Part 1 General

SCI-FAB Product Specifications. Casework Section 1. Part 1 General SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.

More information

CLEAR GLASS WALL SYSTEMS

CLEAR GLASS WALL SYSTEMS CLEAR GLASS WALL SYSTEMS SERIES SI3000C Clean, uninterrupted views. Series SI3000C Clear Glass Walls create a seamless wall with uninhibited views. Clear Glass Walls eliminate vertical stiles, allowing

More information

ARCHITECTURAL STICK SYSTEMS

ARCHITECTURAL STICK SYSTEMS ABOUT THE STICK SYSTEMS: The Steelcraft Architectural Stick Systems are designed to fit virtually all construction requirements for commercial building applications. These frame assemblies are fabricated

More information

CLEAR GLASS WALL SYSTEMS

CLEAR GLASS WALL SYSTEMS PRODUCT DATA SHEET SERIES SI3000C CLEAR GLASS WALL SYSTEMS Clean, Uninterrupted Views Series SI3000C Clear Glass Walls eliminate vertical stiles, allowing for maximum transparency, natural daylighting,

More information

WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents

WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary

More information

b. B aluminum and aluminum-alloy extruded bar, rod, wire, shape and tube

b. B aluminum and aluminum-alloy extruded bar, rod, wire, shape and tube MODEL 240I SECTION 08120 FLUSH ALUMINUM DOORS AND FRAMES PART I GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required to deliver and install aluminum doors, frames,

More information

Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted

Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility

More information

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard

More information

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt

More information

SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL

SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL 2.1.ii 07.08 SCW Curtain Wall Introduction The Company Senior Aluminium Systems are a group of companies based in the United Kingdom supported through

More information

THIS PAGE INTENTIONALLY LEFT BLANK

THIS PAGE INTENTIONALLY LEFT BLANK THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge

More information

SIG Awning / Casement / Fixed Lite 100

SIG Awning / Casement / Fixed Lite 100 TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these

More information

Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors

Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...

More information

THRESHOLDS. Finishing Touch for Floor Closer Installations

THRESHOLDS. Finishing Touch for Floor Closer Installations THRESHOLDS Finishing Touch for Floor Closer Installations Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole

More information

SECTION FINISH HARDWARE

SECTION FINISH HARDWARE SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings

More information

(Wood Door and Frame)

(Wood Door and Frame) ITS961 and ITS965 Closer in Door Track in Frame (Wood Door and Frame) 1 (REFERENCE UNIT CARTON FOR ACCESSORIES AND OPTIONS SUPPLIED) Determine hand of door. Prepare door and frame according to template

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review

More information

Steel Hawk 4300 Electrified Deadlatch (elatch)

Steel Hawk 4300 Electrified Deadlatch (elatch) STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or

More information

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS ` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard

More information