SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5

Transcription

1 CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS... A4/6 DOOR GLAZING/WEATHERING OPTIONS... A4/7 DOOR BOTTOM RAIL SUBSTITUTIONS... A4/8 DOOR CROSS RAIL ADDITIONS... A4/9 350 IR/500 IR DOOR HINGING OPTIONS OFFSET PIVOTS/BUTT HINGES/CONTINUOUS GEARED HINGE... A4/ IR/500 IR DOOR LOCKING HARDWARE STANDARD LOCKS... A4/11 & 12 ACCESSORIES FOR STANDARD LOCKS... A4/ IR/500 IR DOOR CONCEALED EXIT DEVICES AND ACCESSORIES CONCEALED EXIT DEVICE HARDWARE OPTIONS... A4/13 & 14 RIM EXIT DEVICES & ACCESSORIES... A4/16 & 17 AUTO SHOWROOM ENTRANCES AUTO SHOWROOM ACCESSORIES, IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS... A4/18 STANDARD PUSH/PULLS ARCHITECTS CLASSIC PUSH/PULL SETS... A4/19 PULLS... A4/20 IR 500/IR 501 IR 500/IR 501 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/21 IR 500/IR 501/IR 501T/IR 501UT FRAMING SYSTEMS (2-1/2" x 5")... A4/22-24 TRIFAB TM VG 450/451/451T TRIFAB TM VG 450/451 DOOR S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/25 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER)... A4/26 TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER)... A4/27 TRIFAB TM VG 451T FRAMING SYSTEM (2" x 4-1/2" CENTER)... A4/28 Continued on next page * Note: The Impact Rated Entrances section of the price catalog represents hurricane resistant products according to Florida Product Approvals and Notice of Acceptance (NOA) Documents. For non-impact rated entrances and hardware not listed in the Impact Rated Entrances section, consult estimating. Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.

2 A4/2 Impact Rated Entrances CONTENTS SECTION A4...IMPACT RATED ENTRANCES* TRIFAB TM 601/601T/601UT TRIFAB TM 601 DOOR S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/29 TRIFAB TM 601/601T/601UT FRAMING SYSTEM (2" x 6" CENTER)... A4/30 & WALL 1600 WALL SYSTEM TM SUB FRAME ADAPTORS... A4/ HEAVY WALL TM IR/500 HEAVY WALL TM IR ENTRANCES PAGE ENTRANCE HARDWARE OFFERINGS... A4/ HW IR/500 HW IR BASE DOOR DOOR CHASSIS... A4/34 DOOR GLAZING/WEATHERING OPTIONS... A4/35 DOOR BOTTOM RAIL SUBSTITUTIONS... A4/36 DOOR CROSS RAIL ADDITIONS... A4/ HW IR/500 HW IR DOOR HINGING OPTIONS OFFSET PIVOTS/BUTT HINGES/CONTINUOUS GEARED HINGE... A4/ HW IR/500 HW IR DOOR LOCKING HARDWARE STANDARD LOCKS AND ACCESSORIES... A4/ HW IR/500 HW IR DOOR CONCEALED EXIT DEVICES AND ACCESSORIES CONCEALED EXIT DEVICE HARDWARE OPTIONS... A4/40 & 41 RIM EXIT DEVICES & ACCESSORIES... A4/42 & 43 AUTO SHOWROOM ENTRANCES AUTO SHOWROOM ACCESSORIES, IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS... A4/44 STANDARD PUSH/PULLS ARCHITECTS CLASSIC PUSH/PULL SETS... A4/45 PULLS... A4/46 IR 500/IR 501 IR 500/IR 501 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/47 IR 500/IR 501 FRAMING SYSTEMS (2-1/2" x 5")... A4/48 TRIFAB TM VG 450/451/451T TRIFAB TM VG 450/451 DOOR S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/49 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER)... A4/50 TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER)... A4/50 TRIFAB TM 601/601T/601UT TRIFAB TM 601 DOOR S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A4/51 TRIFAB TM 601/601T/601UT FRAMING SYSTEM (2" x 6" CENTER)... A4/52 & 53

3 Impact Rated Entrances FINISH GROUPS A4/3 GROUP NO. DESIGNATION FINISH GROUPS FINISHES INCLUDED #17 GRP #17 CLEAR #40 GRP #29 GRP #40 BRONZE #22 STD. PAINT #14 CLEAR #29 BLACK #18 CHAMPAGNE #26 LIGHT BRONZE #28 MEDIUM BRONZE * Note: The Impact Rated Entrances section of the price catalog represents hurricane resistant products according to Florida Product Approvals and Notice of Acceptance (NOA) Documents. For non-impact rated entrances and hardware not listed in the Impact Rated Entrances section, consult estimating. Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations. NOTICE! Laws and building safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operation hardware, or glazing materials, and assumes no responsibility therefore. It is responsibility of the owner, the architect, and the installer to make these selections in strict conformity to all applicable laws and building codes.

4 A4/4 Impact Rated Entrances BLANK PAGE THIS PAGE LEFT INTENTIONALLY BLANK

5 4 LOCKING OPTIONS MS Point Lock (Active leaf) Flushbolts (Inactive leaf) MS Point Lock MAXIMUM DOOR SIZE Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) MAXIMUM DESIGN PRESSURE ENTRANCE HARDWARE OFFERINGS Hurricane Resistant Product HINGING OPTIONS ± 70 PSF Offset Pivots Butt Hinges Continuous Hinge GLAZING STOP OPTIONS A4/5 GLASS THICKNESS 1, 2, 3 9/16" (14.3) Single 3'-6" x 7'-0" ( x ) ± 90 PSF 2, 3 1" (25.4) (Active leaf) Single 4'-0" x 8'-0" ( x ) Adams Rite 2180 Pair 8'-0" x 8'-0" ( x ) 2 Point Dead Lock (Inactive leaf) 4 Kawneer 1686 Concealed Rod Exit Device (EL option) Paneline TM Concealed Rod Exit Device (EL option) Adams Rite G86 Concealed Rod Exit Device Calibre 9100 Concealed Rod Exit Device 4 Falcon HH1690 Concealed Rod Exit Device (EL option) Jackson 2086 Concealed Rod Exit Device Sargent AD8400 Concealed Rod Exit Device 4 Von Duprin HH9947 Concealed Rod Exit Device Von Duprin 99 XP Concealed Rod Exit Device Corbin Russwin ED5200SA Rim Device Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) Single 3'-6" x 7'-6" ( x 2286) Pair 7'-0" x 7'-6" ( x 2286) Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) ± 90 PSF ± 90 PSF ± 70 PSF ± 70 PSF ± 70 PSF ± 65 PSF ± 90 PSF ± 65 PSF ± 65 PSF ± 50 PSF (Zone 3 only) ± 50 PSF Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge Offset Pivots Butt Hinges Continuous Hinge 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) 1, 2, 3 9/16" (14.3) 2, 3 1" (25.4) Glazing Stop Options: 1 - Structural silicone with Kuraray or Eastman PVB inter layer or Kuraray Sentry Glas inter layer. 2-3M VHB structural tape with Kuraray or Eastman PVB inter layer or Kuraray Sentry Glas inter layer. 3 - Dry glazing gasket with Kuraray Sentry Glas inter layer, only for 9/16" (14.3) infill with design pressure < or = 90 PSF. 4 - Available in 6'-0" x 9'-0" ( x ) pairs. Blast Mitigation Product LOCKING OPTIONS Kawneer 1686 Concealed Rod Exit Device MAXIMUM DOOR SIZE Single 4'-0" x 8'-0" ( x ) Pair 8'-0" x 8'-0" ( x ) MAXIMUM BLAST LOADING Peak Pressure: 5.8 PSF Impulse: 41 PSI/M-SEC Test conditions shown. Other conditions may be supported through calulation. Glazing Stop Options: 1 - Structural silicone with Kuraray or Eastman PVB inter layer. HINGING OPTIONS GLAZING STOP OPTIONS GLASS THICKNESS Offset Pivots 1 9/16" (14.3)

6 A4/6 350 IR/500 IR DOOR CHASSIS Price includes: 1. Blank door up to 3'0" x 7'0". [Maximum door sizes are determined by hardware type, refer to specific hardware for size limitations. All other doors exceeding noted maximum sizes are not considered impact rated, consult factory.] 2. 9/16" square impact glass stops with the use of Kuraray SentryGlas dry glazed with interior and exterior. 3. Glazing gaskets. Special door pricing add the following: 1. Base door chassis: As listed below. 2. Hinging hardware: Select the desired hinging method and add the price of the hardware. 3. Options: Add the price of all other options required for door and/or frame, be sure to add hardware and preparation charges. PART NUMBER STRUCTURE SAMPLE FOR BLANK DOORS PRODUCT CODE + HANDLE + PIVOTING + LOCKING 350IR = 350 MEDIUM S = SINGLE BV = BEVELED STILE BK = BLANK 500IR = 500 WIDE P = PAIR BR = BEVELED RABBETED Door Chassis 350 IR BASE DOOR 500 IR BASE DOOR SINGLE PAIR SINGLE PAIR DOOR OPENING SIZE UP TO 3'0" x 7'0" 6'0" x 7'0" 3'0" x 7'0" 6'0" x 7'0" Beveled Stiles For offset pivots or butt hung doors. PART NO. 350IRSBVBK 350IRPBVBK 500IRSBVBK 500IRPBVBK Bevel Rabbeted Stile For continuous hinge doors. Use of this stile will not affect glass sizes. PART NO. 350IRSBRBK 350IRPBRBK 500IRSBRBK 500IRPBRBK #17 GRP $ $1, $ $1, #40 GRP , , #29 GRP , , , Part Number Special Width 350 IR/500 IR Door A4 $ Special Height A4 $ Price

7 350 IR/500 IR DOOR GLAZING / WEATHERING OPTIONS A4/7 Note: 1. All prices are per leaf unless noted otherwise. 2. When using 9/16" impact glass stops and push bars are required, the use of double bend (CP-II) push bars in lieu of standard single bend (CP) push bars is suggested. Push/pull sets are listed on page A4/19. Glass Stop Options Standard Stops 9/16" IMPACT GLASS STOP (3M Tape Glaze) 9/16" IMPACT GLASS STOP (Structural Silicone Glaze ) 1" IMPACT GLASS STOP (Dry Glaze) 1" IMPACT GLASS STOP (3M Tape Glaze) PART NO. #17 GRP #40 GRP #29 GRP $35.00 $35.00 $ $35.00 $35.00 $ $35.00 $35.00 $ $35.00 $35.00 $35.00 Door Bottom Weathering PART NO. #17 GRP #40 GRP #29 GRP For 3'0" door A4 $16.00 $18.00 $20.00 For 3'6" door A Variable to 4'0" A For 6'0" pairs A

8 A4/8 350 IR/500 IR DOOR BOTTOM RAIL SUBSTITUTIONS Note: 1. All prices are per leaf unless noted otherwise. Fabricated Price Substitute Bottom Rails IR/500 IR Entrances PART NO. #17 GRP #40 GRP #29 GRP 7-1/2" Bottom Rail A4 $38.00 $38.00 $ " Bottom Rail A

9 350 IR/500 IR DOOR CROSS RAIL ADDITIONS A4/9 Notes: 1. All prices are per foot unless noted otherwise. 2. All cross rails/muntins include any of the glass stops listed on page A2/6. 3. Set-up charges are required with all cross rail/muntins. One charge per cross rail horizontal ONLY. 4. When adding cross rails/muntins and push bars are required, use double bend (CP-II push bars in lieu of standard single bend (CP) push bars. Push pulls sets are listed on page A4/19. Per Foot Price Cross Rails IR/500 IR Entrances PART NO. #17 GRP #40 GRP #29 GRP 3-1/2" Cross Rail A4 $17.00 $18.00 $ " Cross Rail A /4" Cross Rail A Cross Rail/Muntin Set-up Charge Rail Set-up Charge (See sample below) SAMPLE OF CROSS RAIL/MUNTIN SET-UP CHARGE The grid at right has a total of two (2) rail set-up charges, two (2) horizontal rail charges. PART NO. Per Foot Price A4 $145.00

10 A4/ IR/500 IR DOOR HINGING OPTIONS Notes: 1. Refer to the general information section for hardware color combinations. 2. Prices for hardware listed are per item, I.E. select (6) butt hinges to receive 1-1/2 pairs of butts per leaf on a pair of doors. Price Offset Pivots Part No. #17 #40 #29 Top Offset Pivot (1) (Kawneer standard) Bottom Offset Pivot (1) (For use with threshold) Intermediate Offset Pivot (Kawneer Standard) (1) (Required with offset pivots) HARDWARE + DOOR PREP A4 $23.00 $24.00 $27.00 FRAME PREP A4 $15.00 HARDWARE + DOOR PREP A FRAME PREP A HARDWARE + DOOR PREP A FRAME PREP (Includes reinforcing) A (1) Offset Pivot Paint Charge PER DOOR PAINT CHARGE A Butt Hinges Continuous Geared Hinge 4-1/2" x 4" 304 Stainless Steel with N.R.P. (Rounded corner) (Powder Coat Painted finish) HARDWARE + DOOR PREP A FRAME PREP (Includes reinforcing) A Up to 7'-0" HARDWARE + DOOR PREP A Up to 8'-0" HARDWARE + DOOR PREP A Required for IR Doors - Intermediate Pivots Door Height Infill Weight Intermediate Under 7'6" All Infills Add one (1) pivot Over 7'6" All Infills Add two (2) pivots FRAME PREP A Required for IR Doors - Hinges Door Height Infill Weight Intermediate Under 7'6" All Infills Add one (1) hinge Over 7'6" All Infills Add two (2) hinges

11 350 IR/500 IR DOOR LOCKING HARDWARE A4/11 Notes: 1. Locking options do not include cylinders or lock operators. Select cylinders and lock operators separately. 2. Back set for all locks listed on this page is 1-1/8". 3. Refer to the general information section for hardware color combinations. Locking Hardware Options (For use with 350 IR/500 IR Door) ± 90 PSF Maximum Design Pressure 4'-0" x 9'-0" Maximum Door Leaf Size Standard Adams Rite MS1850 Lock + Hurricane MS Three point Lock SINGLE Price Part No. #17 #40 #29 HARDWARE + DOOR PREP A4 $ $ $ FRAME PREP A Standard Adams Rite MS1850 Lock + Hurricane MS Three point Lock PAIR (Active Door Leaf) Hurricane Resistant Flush Bolts (2) PAIR (Inactive Door Leaf) Price includes (1) pair of flush bolts. HARDWARE + DOOR PREP A FRAME PREP A MS Cylinder Guard (For use with Kawneer standard cylinders) Note: N/A with exit devices HARDWARE + DOOR PREP A FRAME PREP A Cylinder for MS & Latch Locks Price Includes: 1. Hardware + Door Prep. Thumb Turn for MS Locks Note: N/A with exit devices and 4510 latch locks HARDWARE + DOOR PREP A KEYED INDIVIDUALLY A KEYED IN PAIRS (INCLUDES 2 CYLINDERS) A KEYED ALIKE (IN GROUPS OF 50) A USE IN PLACE OF CYLINDER A (2) Some building codes, with some qualifications, prohibit the use of manual flush bolts on exit doors needed to handle the occupant load of the building. Please consult with your local code to verify the use of manual flush bolts for your specific application.

12 A4/ IR/500 IR DOOR LOCKING HARDWARE Notes: 1. Locking options do not include cylinders or lock operators. Select cylinders and lock operators separately. 2. Back set for all locks listed on this page is 1-1/8". 3. Refer to the general information section for hardware color combinations. Locking Hardware Options (For use with 350 IR/500 IR Door) (Continuation) ± 90 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size Adams Rite 2180 Dead Lock Flush Bolt (For pairs only - maximum size 8'-0" x 8'-0") MS Cylinder Guard (For use with Kawneer standard cylinders) Note: N/A with exit devices Cylinder for MS & Latch Locks Price Includes: 1. Hardware + Door Prep. Thumb Turn for MS Locks Note: N/A with exit devices and 4510 latch locks Price Part No. #17 #40 #29 HARDWARE + DOOR PREP A4 $ $ $ FRAME PREP A HARDWARE + DOOR PREP A KEYED INDIVIDUALLY A KEYED IN PAIRS (INCLUDES 2 CYLINDERS) A KEYED ALIKE (IN GROUPS OF 50) A USE IN PLACE OF CYLINDER A

13 350 IR/500 IR DOOR CONCEALED EXIT DEVICES AND ACCESSORIES A4/13 Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the General Information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf, for special size concealed exit devices use part A4 and add $60.00 list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf, double for pairs of doors. ± 90 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size ± 70 PSF Maximum Design Pressure 4'-0" x 9'-0" Maximum Door Leaf Size Price Part No. #17 #40 #29 Kawneer 1686 Concealed Rod Exit Device (Include: Exit device) HARDWARE + DOOR PREP A4 $ $ FRAME PREP A Cylinder KEYED INDIVIDUALLY A KEYED ALIKE (in groups of 50) A ± 90 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size Jackson 2086 Concealed Rod Exit Device (Include: Exit device) Blast Mitigation - Tested per ASTM 1642 standard test method for glazing systems subject to air blast loadings. HARDWARE + DOOR PREP A4 1, , , FRAME PREP A CYLINDER & CYLINDER MOUNTING PAD A Threshold Stop (For use with concealed vertical rod exit devices) A Fabricated Price ± 70 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size Part No. #17 GRP #40 GRP #29 GRP Paneline TM Exit Device Includes Paneline concealed rod device. Paneline TM EL (Refer to Access Control section) STD. 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP A4 $ $ $ Select CPN, CO-9 or CO-12 pull separately. (Price is for one leaf) NON 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP A , SINGLE RX SWITCH A DOUBLE RX SWITCH A FRAME PREP A Price Part No. #17 #40 #29 Cylinder for Paneline TM Exit Device Note: Use with Paneline TM. KEYED INDIVIDUALLY A KEYED ALIKE (In groups of 50) A Paneline TM Cylinder Guard Note: For Paneline TM Exit Device with CPN pull A Threshold Stop (For use with concealed vertical rod exit devices) A4 7.00

14 A4/ IR/500 IR DOOR CONCEALED EXIT DEVICES AND ACCESSORIES Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the General Information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf, for special size concealed exit devices use part A4 and add $60.00 list per leaf. Concealed Exit Device Hardware Options (Continuation) Note: Hardware + door preparation prices are per leaf, double for pairs of doors. ± 65 PSF Maximum Design Pressure 3'-0" x 9'-0" Maximum Door Leaf Size Falcon HH1690 Concealed Rod Exit Device (Include: Exit device) Cylinder for Exit Device (For use with Falcon HH1690 exit devices) Von Duprin HH9947 Concealed Rod Exit Device (Include: Exit device) Von Duprin HH9947 Concealed Rod Exit Device Night Latch Cylinder Assembly Price Part No. #17 #40 #29 HARDWARE + DOOR PREP A4 $ $ $ FRAME PREP A KEYED INDIVIDUALLY A KEYED ALIKE (In groups of 50) A HARDWARE + DOOR PREP A4 3, , , FRAME PREP A ± 70 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size Cylinder for Exit Device (For use with Von Duprin HH9947) Adams Rite G86 Concealed Rod Exit Device (Include: Exit device) Calibre 9100 Concealed Rod Exit Device (Include: Exit device) Sargent 8400AD Concealed Rod Exit Device (Include: Exit device) HARDWARE + DOOR PREP KEYED INDIVIDUALLY A A4 US26D US10B SPBLX HARDWARE + DOOR PREP A4 $ $ $ FRAME PREP A CYLINDER & CYLINDER MOUNTING PAD A HARDWARE + DOOR PREP A FRAME PREP A CYLINDER & CYLINDER MOUNTING PAD A HARDWARE + DOOR PREP A4 3, , FRAME PREP A CYLINDER & CYLINDER MOUNTING PAD A Threshold Stop (For use with concealed vertical rod exit devices) A4 7.00

15 BLANK PAGE A4/15 THIS PAGE LEFT INTENTIONALLY BLANK

16 A4/ IR DOOR RIM EXIT DEVICES AND ACCESSORIES Notes: 1. Exit device options do not include pull handles, select pull handles separately. 2. Refer to the General Information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf, for special size rim exit devices use part A4 and add $50.00 list per leaf. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf, double for pairs of doors. ± 50 PSF Maximum Design Pressure (Zone 3 only) 3'-6" x 7'-6" Maximum Door Leaf Size Von Duprin 99 XP Rim Device (Include: Exit device.) For use with 500 IR doors. Single Doors For use with 500 IR doors. Pair of Doors Price Part No. #17 #40 #29 US HARDWARE + DOOR PREP A4 $2, $2, FRAME PREP SINGLE DOOR A RIM CYLINDER NIGHT LATCH HARDWARE + DOOR PREP RIM CYLINDER NIGHT LATCH Von Duprin 9954 Removable Mullion (For use with pairs of Von Duprin 99 XP rim exit devices) Maximum height of 7'6" A A A A A US26D US28 2, US26D $3, US10B , SPBLK , US10B SPBLK Von Duprin KR9954 Keyed Removable Mullion (For use with pairs of Von Duprin 99 XP rim exit devices) Maximum height of 7'6" UP TO 7'0" HARDWARE , , UP TO 7'6" HARDWARE , , FRAME PREP A UP TO 7'0" HARDWARE , , UP TO 7'6" HARDWARE , , FRAME PREP A RIM CYLINDER (Keyed individually) A4 $12.00 $12.00 $12.00

17 500 IR DOOR RIM EXIT DEVICES AND ACCESSORIES A4/17 Notes: 1. Exit device options do not include pull handles, select pull handles separately. 2. Refer to the General Information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf, for special size rim exit devices use part A4 and add $50.00 list per leaf. Rim Exit Device Hardware Options (Continuation) Note: Hardware + door preparation prices are per leaf, double for pairs of doors. ± 50 PSF Maximum Design Pressure 4'-0" x 8'-0" Maximum Door Leaf Size Corbin Russwin ED5200S Rim Device (Include: Exit device.) For use with 500 IR doors. Corbin Russwin WS707AKM Removable Mullion (For use with pairs of Corbin Russwin rim exit devices) Maximum height of 7'0" Corbin Russwin WS708AKM Removable Mullion (For use with pairs of Corbin Russwin rim exit devices) Maximum height of 8'0" Price Part No. #17 #40 #29 US32D $1, HARDWARE + DOOR PREP A4 FRAME PREP SINGLE DOOR A US10B $1, RIM CYLINDER (Keyed individually) A RIM CYLINDER (Keyed alike in groups of 50) A UP TO 7'0" HARDWARE PRIMED 1, FRAME PREP HWA Cylinder for Removable Mullion (For use with Corbin Russwin WS707AKM and WS708AKM removable mullion) UP TO 8'0" HARDWARE PRIMED 1, FRAME PREP HWA KEYED INDIVIDUALLY A

18 A4/18 AUTO SHOWROOM ACCESSORIES, IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS Auto Showroom Accessories Part No. Price Aluminum Riser Block Standard for bi-fold door. Plastic Riser Block Optional for bi-fold door. Caster Standard for bi-fold door. Special Width Auto Showroom Door For each additional 1' increment. Auto Showroom Door Bottom Weathering Variable to 5'0" for large inactive door leaf. 3'-0" x 7'-0" 3'-0" x 7'-0" 3'-0" x 7'-0" A A A A A4 IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS BI-FOLD TYPE ENTRANCES 7'-0" Door Opening ± 70 PSF Maximum Design Pressure #1 #2 #17 GRP $55.00 (NO FINISH) (NO FINISH) (NO FINISH) (NO FINISH) #40 GRP #29 GRP (RIGHT HAND SHOWN) 9'-0" D.O. Impact Resistant Configuration Includes: Active Leaf = 3'0" x 7'0" 350 IR/500 IR active door leaf with style CO-9 push/ pull hardware, 1 continuous hinge, MS lock + 3-point lock, with cylinders, and surface closers. Inactive Leaf = 3'0" x 7'0" 350 IR/500 IR inactive door leaf #1 with impact resistant flushbolts, riser block, and 1 continuous hinge. Inactive Leaf = 3'0" x 7'0" 350 IR/500 IR inactive door leaf #2 with impact resistant flushbolts, riser block, caster, and 1 continuous hinge. Framing = TRIFAB TM VG 450/451 center frame with threshold. MAXIMUM ALLOWABLE SIZES AND RESTRICTIONS (THIS PAGE): 1" tape glazed impact infill only. Door opening width to 10'0". Door opening height to 8'0". Active door 4'0" wide.

19 ARCHITECTS CLASSIC PUSH / PULL SETS A4/19 Notes: 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Architects Classic Push/Pull Sets Style CO-9/CP Style CO-12/CP Style CP Push Bars (2) Style CO-9/CP-II Not for use on D/A doors. Style CO-12/CP-II Not for use on D/A doors. Style CP-II Push Bars (2) Not for use on D/A doors. Style CO-9/CO-9 Style CO-12/CO-12 Finish Group Part No. NO. 1 NO. 2 NO.3 = 3'0" PA4 $ $ $ = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA = 3'0" PA = 3'6" PA VAR. TO 4'0" PA PER LEAF PA PER LEAF PA Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

20 A4/20 PULLS Notes: 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Pulls Style CO-9 For one (1) style CO-9 pull handle. Style CO-12 For one (1) style CO-12 pull handle. Style CPN For use with RH Paneline unit. For use with LH Paneline unit. For use with RH Dummy Paneline unit. For use with LH Dummy Paneline unit. For one (1) style CPN pull handle. Color Material Identification Finish Group Part No. NO. 1 NO. 2 NO PA4 $ $ $ PA PA PA PA PA4 Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM # N/A N/A Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

21 IR 500/IR 501 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES A4/21 Price includes: Fabricated header / transom bar, glass stops, mounting trays, horizontal door stop and weathering, frame clips, tray clips, threshold and screws. Notes: Select concealed overhead closer from page A3/4 and A3/5. Select closer arm from page A3/6. Maximum door sizes: 3'0" x 8'0" or 3'6" x 7'6". 1-3/4" doors with threshold It is necessary that the customer inform Kawneer of any project conditions that will have an impact on closer strength selection. Standard closer selection will apply if no such information is supplied. S/A Offset Arm in IR 500/IR 501 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package (IR 500 or IR 501) Offset Pivot Butt Hung S/A Offset Arm Transom Package (IR 500) Offset Pivot Butt Hung PART NO. #17 GRP #40 GRP #29 GRP PART NO. #17 GRP #40 GRP #29 GRP RH LH RH LH RH LH RH LH $ $ $ $ $ $ S/A Offset Arm Transom Package (IR 501) Offset Pivot Butt Hung RH LH RH LH Special Size Charge: No charge - for single transom/header packages under 3'0", A4 (NO CHARGE). Add - for single transom/header packages over 3'0" up to 4'0", A4 $ Add - for pairs transom/header packages over 6'0", A4 $ Prep Charge: To prep for concealed rod exit device, use part number A4 and add $ To prep for hurricane 3-point lock, use part number A4 and add $ Optional: Delete threshold, use part A4 and delete $(21.00) Single. Delete threshold, use part A4 and delete $(38.00) Pair. To substitute silicone setting blocks for IR 500, use , and add $4.40. To substitute silicone setting blocks for IR 501, use , and add $4.40.

22 A4/22 IR 500/IR 501/IR 501T/IR 501UT FRAMING SYSTEM (2-1/2" x 5" CENTER) Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. IR 500 Framing System (2-1/2" x 5") Screw Spline Mullion (3) Two Piece Head Head Horizontal (5) Jamb Sill (5) HP Sill Flashing Expansion Mullion PART NO #17 GRP $26.25 $27.65 $25.80 $28.05 $19.55 $29.25 $13.20 $41.75 #40 GRP #29 GRP IR 501 Framing System (2-1/2" x 5") Screw Spline Mullion Two Piece Head Head Horizontal (6) Jamb Sill (6) HP Sill Flashing Expansion Mullion PART NO #17 GRP $37.70 $28.76 $26.83 $29.17 $20.33 $30.42 $13.20 $43.42 #40 GRP #29 GRP (3) To add steel (575110) in IR 500 mullion, use part number , and add $22.21 price per foot. (5) To substitute silicone setting blocks for IR 500, use part number , and add $4.40 price per foot. (6) To substitute silicone setting blocks for IR 501, use part number , and add $4.40 price per foot.

23 IR 500/IR 501/IR 501T/IR 501UT FRAMING SYSTEM (2-1/2" x 5" CENTER) A4/23 Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. IR 500/IR 501 Framing System (2-1/2" x 5") Special Moldings Door Jamb (4)(8) Door Jamb (4)(8) w/ Pocket Filler Header/Transom Bar (4)(5) (Two Piece) Header/Transom Bar (4)(5) (4)(8) Door Jamb (One Piece) Door Jamb (4)(8) w/ Pocket Filler Header/Transom Bar (4)(5) Std. 4" Threshold PART NO A4 #17 GRP $40.00 $41.25 $30.70 $28.60 $41.60 $42.90 $31.93 #40 GRP #29 GRP IR 501T Framing System (2-3/4" x 5") Screw Spline $4.36 (#10 Mill) Mullion Head (Two Piece) Head (One Piece) Horizontal (7) Jamb (9) Sill (7) HP Sill Flashing Expansion Mullion (9) PART NO. 501T T T T T T T #17 GRP $39.21 $28.18 $25.49 $26.25 $21.55 $25.25 $17.16 $42.75 #40 GRP #29 GRP IR 501T Framing System (2-3/4" x 5") Special Moldings Door Jamb (4)(8) Door Jamb (4)(8) PART NO #17 GRP $45.17 $46.59 #40 GRP #29 GRP (4) Non-thermal door jambs and t-bars are the standard application for immediate door frames. (5) To substitute silicone setting blocks for IR 500, use part number , and add $4.40 price per foot. (6) To substitute silicone setting blocks for IR 501, use part number , and add $4.40 price per foot. (7) To substitute silicone setting blocks for IR 501T/IR 501UT, use part number , and add $4.40 price per foot. (8) To add steel (575111) in IR 500/IR 501, use part number , and add $24.80 price per foot. (9) To add steel (575310) in IR 501, use part number , and add $22.21 price per foot.

24 A4/24 IR 500/IR 501/IR 501T/IR 501UT FRAMING SYSTEM (2-1/2" x 5" CENTER) Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. IR 501UT Framing System (2-3/4" x 5") Screw Spline Mullion Head (Two Piece) Head (One Piece) Horizontal (7) Jamb (9) Sill (7) HP Sill Flashing Expansion Mullion (9) PART NO #17 GRP $40.95 $28.70 $25.70 $26.65 $22.80 $26.10 $18.00 $42.75 #40 GRP #29 GRP IR 501UT Framing System (2-3/4" x 5") Screw Spline Door Jamb (4)(8) Door Jamb (4)(8) PART NO #17 GRP $45.17 $46.59 #40 GRP #29 GRP (4) Non-thermal door jambs and t-bars are the standard application for immediate door frames. (5) To substitute silicone setting blocks for IR 500, use part number , and add $4.40 price per foot. (6) To substitute silicone setting blocks for IR 501, use part number , and add $4.40 price per foot. (7) To substitute silicone setting blocks for IR 501T/IR 501UT, use part number , and add $4.40 price per foot. (8) To add steel (575111) in IR 500/IR 501, use part number , and add $24.80 price per foot. (9) To add steel (575310) in IR 501, use part number , and add $22.21 price per foot.

25 TRIFAB TM VG 450/451 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES A4/25 Price includes: Fabricated header / transom bar, glass stops, mounting trays, horizontal door stop and weathering, frame clips, tray clips, threshold and screws. Notes: Select concealed overhead closer from page A3/4. Select closer arm from page A3/6. Maximum door sizes: 3'0" x 8'0" or 3'6" x 7'6". It is necessary that the customer inform Kawneer of any project conditions that will have an impact on closer strength selection. Standard closer selection will apply if no such information is supplied. S/A Offset Arm in Trifab TM VG 450 S/A Offset Arm Header Package Description Single Door 3'0" Pair of Doors 6'0" Offset Pivot Butt Hung C.O.C Transom Bar in Trifab TM VG 450 C.O.C T-Bar Header Package PART NO. #17 GRP #40 GRP #29 GRP PART NO. #17 GRP #40 GRP #29 GRP A4 RH A4 LH A4 RH A4 LH $ $ $ A4 $ $ $ A Description Single Door 3'0" Pair of Doors 6'0" Offset Pivot PART NO. #17 GRP #40 GRP #29 GRP PART NO. #17 GRP #40 GRP #29 GRP A4 RH A4 LH $ $ $ A4 $ $ $ Butt Hung A4 RH A4 LH A S/A Offset Arm in Trifab TM VG 451 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset Pivot Butt Hung C.O.C Transom Bar in Trifab TM VG 451 C.O.C T-Bar Header Package PART NO. #17 GRP #40 GRP #29 GRP PART NO. #17 GRP #40 GRP #29 GRP A4 RH A4 LH A4 RH A4 LH Special Size Charge: No charge - for single transom/header packages under 3'0", A4 (NO CHARGE). Add - for single transom/header packages over 3'0" up to 4'0", A4 $ Add - for pairs transom/header packages over 6'0", A4 $ Prep Charge: To prep for concealed rod exit device, use part number A4 and add $ To prep for hurricane 3-point lock, use part number A4 and add $ $ $ $ A4 $ $ $ A Description Single Door 3'0" Pair of Doors 6'0" Offset Pivot Butt Hung PART NO. #17 GRP #40 GRP #29 GRP PART NO. #17 GRP #40 GRP #29 GRP A4 RH A4 LH A4 RH A4 LH $ $ $ A4 $ $ $ A Optional: Delete threshold, use part A4 and delete $(21.00) Single. Delete threshold, use part A4 and delete $(38.00) Pair. To substitute silicone setting blocks for TF450, use part number , and add $3.00. To substitute silicone setting blocks for TF451, use part number A4, and add $4.40.

26 A4/26 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER) Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Trifab TM VG 450 Framing System (1-3/4" x 4-1/2" Center) Screw Spline Jamb / Head Mullion Head Horizontal Sill HP Sill Flashing PART NO A A A A A A4 #17 GRP $16.50 $19.81 $17.61 $19.86 $15.46 $8.85 #40 GRP #29 GRP Special Moldings Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Heavy Mullion 4-1/2" x 4-1/2" Jamb 4-1/2" x 4-1/2" Mullion 4-1/2" x 4-1/2" Horizontal 4-1/2" x 4-1/2" Sill PART NO A A A A A4 #17 GRP $24.76 $31.62 $32.27 $39.35 $32.79 #40 GRP #29 GRP Special Moldings Door Jamb w/pocket Header/ T-Bar (10)(11) Door Jamb Steel Door Jamb Steel Std. 4" Door Jamb (15) Filler (15) Door Jamb (15) T-Bar (10)(11) (High-load) Reinforcing Reinforcing Threshold PART NO A A A A A A A A4 #17 GRP $19.89 $21.19 $16.30 $24.92 $33.14 #40 GRP #29 GRP (10) To substitute silicone setting blocks, use part number , and add $1.00 per foot. (11) To substitute silicone setting blocks, use part number , and add $3.00 per foot. (15) Trifab 450/451/451T door jamb anchor, use part number , and add $ $53.00 (Primed) $57.00 (Primed) $4.36 (#10 Mill)

27 TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER) A4/27 Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 451 Framing System (2" x 4-1/2" Center) Screw Spline Jamb / Head Mullion Head Horizontal Sill HP Sill Flashing Expansion Mullion 0-25 Corner PART NO A A A A A A A A4 #17 GRP $17.29 $20.19 $18.30 $20.28 $16.20 $8.85 $24.93 $33.42 #40 GRP #29 GRP Special Moldings Mullion Heavy Mullion Extra Heavy Mullion Jamb Horizontal Sill 4-1/2" x 4-1/2" Mullion PART NO A A A A A A A4 #17 GRP $25.24 $31.55 $39.44 $31.52 $39.35 $32.79 $32.80 #40 GRP #29 GRP Special Moldings Door Jamb w/ Header/T-Bar (14) Door Jamb Steel Door Jamb Steel Std. 4" Door Jamb (15) Pocket Filler (15) Door Jamb (15) Header/T-Bar (14) (High-load) Reinforcing Reinforcing Threshold PART NO A A A A A A A A4 #17 GRP $20.33 $ $25.22 $33.55 $53.00 $57.00 $4.36 #40 GRP (Primed) (Primed) (#10 Mill) #29 GRP (12) To substitute silicone setting blocks, use part number A4, and add $1.00 per foot. (13) To substitute silicone setting blocks, use part number A4, and add $3.00 per foot. (14) To substitute silicone setting blocks, use part number A4, and add $4.40 per foot. (15) Trifab 450/451/451T door jamb anchor, use part number , and add $26.30.

28 A4/28 TRIFAB TM VG 451T FRAMING SYSTEM (2" x 4-1/2" CENTER) Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 451T Framing System (2" x 4-1/2" Center) Screw Spline Jamb / Head Mullion Head Horizontal Sill HP Sill Flashing Expansion Mullion 0-25 Corner PART NO A A A A A A A A4 #17 GRP $24.76 $25.06 $19.75 $22.14 $19.22 $11.53 $28.67 $38.37 #40 GRP #29 GRP Special Moldings Mullion Heavy Mullion Extra Heavy Mullion 4-1/2" x 4-1/2" Mullion PART NO A A A A4 #17 GRP $31.33 $39.16 $48.95 $32.80 #40 GRP #29 GRP Special Moldings (14) Door Jamb w/ Header/T-Bar Door Jamb Steel Door Jamb Steel Std. 4" Door Jamb (15) Pocket Filler (15) Door Jamb (15) Header/T-Bar (14) (High-load) Reinforcing Reinforcing Threshold PART NO A A A A A A A A4 #17 GRP $20.33 $ $25.22 $33.55 $53.00 $57.00 $4.36 #40 GRP (Primed) (Primed) (#10 Mill) #29 GRP (12) To substitute silicone setting blocks, use part number A4, and add $1.00 per foot. (13) To substitute silicone setting blocks, use part number A4, and add $3.00 per foot. (14) To substitute silicone setting blocks, use part number A4, and add $4.40 per foot. (15) Trifab 450/451/451T door jamb anchor, use part number , and add $26.30.

29 TRIFAB TM 601 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES A4/29 Price includes: Fabricated header/transom bar, glass stops, mounting trays, horizontal door stop and weathering, frame clips, tray clips, threshold and screws. Notes: Select concealed overhead closer from page A3/4 and A3/5. Select closer arm from page A3/6. Maximum door sizes: 3'0" x 8'0" or 3'6" x 7'6". Minimum door width: 2'6". It is necessary that the customer inform Kawneer of any project conditions that will have an impact on closer strength selection. Standard closer selection will apply if no such information is supplied. Center hung door applications are not available. S/A Offset Arm in TRIFAB TM 601 Description Single Door 3'0" Pair of Doors 6'0" S/A Offset Arm Header Package Offset pivot Butt hung Continuous gear S/A Offset Arm Transom Package Offset pivot Butt hung Continuous gear Part No. #17 GRP #40 GRP #29 GRP Part No. #17 GRP #40 GRP #29 GRP A4 RH A4 LH A4 RH A4 LH A4 RH A4 LH A4 RH A4 LH $ $ $ A4 $ $ $ $ $ $ A4 $ $ $ $ $ $ A4 $ $ $ $ $ $ A4 $ $ $ Special Size Charge: No charge - for single transom/header packages under 3'0", A4 (NO CHARGE). Add - for single transom/header packages over 3'0" up to 3'6", A4 $ Add - for pairs transom/header packages over 6'0", A4 $ Prep Charge: To prep for concealed rod exit device, use part number A4 and add $ To prep for 3-point lock use part number A4 and add $ Optional: Delete threshold, use part A4 and delete $(21.00) Single. Delete threshold, use part A4 and delete $(38.00) Pair.

30 A4/30 TRIFAB TM 601/601T/601UT FRAMING SYSTEM (2" x 6") Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Trifab TM 601 Framing Systems (2" x 6" Non-Thermal Frames) Screw Spline Mullion (2-1/4" x 6") Head Horizontal (Outside Glazed) (Outside Glazed) Sill/Jamb Expansion Mullion HP Sill Flashing PART NO A A A A A A4 #17 GRP $23.50 $19.12 $23.00 $19.75 $31.50 $17.25 #40 GRP $26.79 $21.80 $26.22 $22.52 $35.91 $19.67 #29 GRP $29.47 $23.98 $28.84 $24.77 $39.50 $21.63 Trifab TM 601T Framing Systems (2" x 6" Thermally Broken Frames) Screw Spline Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Mullion (2-1/4" x 6") Head Horizontal (Outside Glazed) (Outside Glazed) Sill/Jamb Expansion Mullion HP Sill Flashing PART NO. 601T9139A4 601T9134A4 601T9119A4 601T9114A4 601T9115A4 601T9147A4 #17 GRP $25.25 $21.66 $24.00 $20.75 $33.50 $18.00 #40 GRP $28.79 $24.69 $27.36 $23.66 $38.19 $20.52 #29 GRP $31.66 $27.16 $30.10 $26.02 $42.01 $22.57 Trifab TM 601UT Framing Systems (2" x 6" Thermally Broken Frames) Screw Spline Expansion Mullion PART NO. 601UT9115A4 #17 GRP $35.50 #40 GRP $40.47 #29 GRP $44.52

31 TRIFAB TM 601/601T/601UT FRAMING SYSTEM (2" x 6") A4/31 Price Includes: 1. Fabrication of door frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Trifab TM 601 Door Frames (2" x 6" Non-Thermal Frames) Special Moldings Door Jamb (19) (1-3/4" Door Depth) Door Jamb (1-3/4" Door Depth) Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Header/T-Bar (21) (1-3/4" Door Depth) Header/T-Bar (1-3/4" Door Depth) Std. 4" Header/T-Bar Threshold PART NO A A A A A A4 #17 GRP $25.28 $32.50 $32.10 $22.00 $24.50 #40 GRP $28.82 $37.05 $36.59 $25.08 $27.93 #29 GRP $31.70 $40.76 $40.25 $27.59 $30.72 Trifab TM 601T/601UT Door Frames (2" x 6" Thermally Broken Frames) Special Moldings $4.36 (#10 Mill) Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Door Jamb (19) (1-3/4" Door Depth) Header/T-Bar (21) (1-3/4" Door Depth) Steel Reinforcing Door Jamb Steel Reinforcing PART NO. 601T9131A4 601T9133A A A4 #17 GRP $28.45 $32.93 #40 GRP $32.43 $37.54 #29 GRP $35.68 $41.29 $35.00 (Primed) $57.00 (Primed) (19) Door jamb with non-conductive door stop with aluminum snap-on cover for 1-3/4" door depths. (21) T-bar/Header with non-conductive door stop with aluminum snap-on cover for 1-3/4" door depths and surface mounted closers.