CONTENTS. Custom Entrances and Hardware

Size: px
Start display at page:

Download "CONTENTS. Custom Entrances and Hardware"

Transcription

1 CONTENTS A2/1 CONTENTS SECTION A2...CUSTOM ENTRANCES AND HARDWARE* PAGE PRICING EXAMPLES... A2/3 A2/4 190/350/500 BASE DOOR DOOR CHASSIS... A2/5 DOOR GLAZING/WEATHERING OPTIONS... A2/6 DOOR BOTTOM RAIL SUBSTITUTIONS... A2/7 A2/8 DOOR CROSS RAIL/MUNTIN ADDITIONS... A2/9 A2/10 STANDARD HINGING HARDWARE OFFSET PIVOTS/BUTT HINGES... A2/11 A2/12 CONTINUOUS GEARED HINGE/CENTER PIVOT... A2/12 LOCKING HARDWARE STANDARD LOCKS... A2/13 MULTI-POINT LOCK ADDITIONS... A2/14 ACCESSORIES FOR STANDARD LOCKS... A2/15 EXIT DEVICE HARDWARE CONCEALED EXIT DEVICE AND ACCESSORIES... A2/16 A2/17 RIM EXIT DEVICES AND ACCESSORIES... A2/18 A2/20 KAWNEER PANELINE TM & ACCESSORIES... A2/21 AUTO SHOWROOM ENTRANCES AUTO SHOWROOM ACCESSORIES, STANDARD AUTO SHOWROOM SPECIFICATIONS... A2/22 NON-IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS... A2/23 STANDARD PUSH/PULLS ARCHITECTS CLASSIC PUSH/PULL SETS... A2/25 EXIT DEVICE/AUTO SHOWROOM PUSH BAR... A2/26 SPECIAL FABRICATED FRAMES TRIFAB TM 400 FRAMING SYSTEM (1-3/4" x 4")... A2/27 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER)... A2/28 TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER)... A2/29 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER)... A2/30 HIGH VELOCITY HURRICANE ZONE NON-IMPACT APPLICATIONS TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER)... A2/31 HIGH VELOCITY HURRICANE ZONE NON-IMPACT APPLICATIONS TRIFAB TM VG 451T FRAMING SYSTEM (2" x 4-1/2" CENTER)... A2/32 TRIFAB TM 601/601T/601UT FRAMING SYSTEM (2" x 6")... A2/33 A2/34 EnCORE TM FRAMING SYSTEM (1-3/4" x 4-1/2" AND 1-3/4" x 6")... A2/ WALL SYSTEM TM DOOR FRAME ADAPTORS... A2/36 InFrame TM INTERIOR FRAMING SYSTEM... A2/36 * Note: For hardware not listed in the price catalogue, consult estimating! Continued on next page Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.

2 A2/2 CONTENTS/FINISH GROUPS PAGE TRANSOM BAR/DOOR HEADER & THRESHOLD PACKAGES CENTER HUNG TRANSOM/HEADER & THRESHOLD PACKAGES... A2/37 S/A OFFSET ARM TRANSOM/HEADER & THRESHOLD PACKAGES... A2/38 - A2/40 HARDWARE BY OTHERS* HINGING HARDWARE... A2/41 PIVOTING HARDWARE... A2/42 LOCKING HARDWARE... A2/43 - A2/45 EXIT DEVICE HARDWARE... A2/46 - A2/47 CLOSERS AND DOOR HOLDERS... A2/48 MISCELLANEOUS HARDWARE... A2/49 - A2/50 HARDWARE OPTIONS ACCESS CONTROL - EXIT DEVICES WITH ELECTRIC LATCH... A2/51 A2/55 GROUP NO. DESIGNATION FINISH GROUPS FINISHES INCLUDED #17 GRP #17 CLEAR #40 GRP #29 GRP #40 BRONZE #22 STD. PAINT #14 CLEAR #29 BLACK #18 CHAMPAGNE #26 LIGHT BRONZE #28 MEDIUM BRONZE NOTICE! Laws and building safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operation hardware, or glazing materials, and assumes no responsibility therefore. It is responsibility of the owner, the architect, and the installer to make these selections in strict conformity to all applicable laws and building codes. * Note: For hardware not listed in the price catalogue, consult estimating! Note: Kawneer entrances in this price book are outswing in recognition of building code life safety considerations.

3 PRICING EXAMPLES A2/3 PRICING EXAMPLE #1 40 DARK BRONZE FINISH 350 SINGLE DOOR TRIFAB TM VG 450 FRAME (CENTER) OFFSET PIVOT MS LOCK - 2 CYLINDERS STANDARD THRESHOLD NORTON 1605BC W/H.O. CO-9 S/A PUSH/PULL SET 1/4" BEVELED GLASS STOP PRICING EXAMPLE #2 Door Opening 7'-6" D.O. 40 DARK BRONZE FINISH 350 SINGLE DOOR TRIFAB TM VG 450 FRAME (CENTER) BUTT HINGES - #29 BLACK FINISH MS LOCK - 2 CYLINDERS STANDARD THRESHOLD NORTON 1605BC W/H.O. CO-12 S/A PUSH/PULL SET 1/4" SQUARE GLASS STOP PRICING EXAMPLE #3 Door Opening Door Opening D.O. 6'-8" Door Opening 40 DARK BRONZE FINISH 350 PAIR OF DOORS CONTINUOUS HINGE MS LOCK - 2 CYLINDERS CO-9 S/A PUSH/PULL SET NORTON 1605BC W/H.O. 1/4" BEVELED GLASS STOP 3 x 3 MUNTIN GRID USING 5/16" MUNTINS QTY. PART NO. DESCRIPTION LIST PRICE EXTENDED PAGE SBVBK 350 CHASSIS $ $ A2/ TOP OFFSET PIVOT A2/ TOP OFFSET PIVOT PREP A2/ BOTTOM OFFSET PIVOT A2/ BOTTOM OFFSET PIVOT PREP A2/ P CO-9 S/A PUSH/PULL SET A2/ MS LOCK A2/ MS LOCK PREP A2/ (2) CYLINDER (KEYED IN PAIRS) A2/ NORTON 1601BC CLOSER A3/ T-BAR/HEADER (PER FT.) A2/ DOOR JAMB (PER FT.) A2/ THRESHOLD (PER FT.) A2/28 TOTAL PRICE = $1, QTY. PART NO. DESCRIPTION LIST PRICE EXTENDED PAGE SBVBK 350 CHASSIS $ $ A2/ SPECIAL WIDTH CHARGE A2/ SQUARE GLASS STOP SUB A2/ BUTT HINGES A2/ BUTT HINGE PREPS A2/ P CO-12 S/A PUSH/PULL SET A2/ MS LOCK A2/ MS LOCK PREP A2/ (2) CYLINDER (KEYED IN PAIRS) A2/ NORTON 1601BC CLOSER A3/ T-BAR/HEADER (PER FT.) A2/ DOOR JAMB (PER FT.) A2/ THRESHOLD (PER FT.) A2/ MULLION (PER FT.) A2/ HEAD (PER FT.) A2/ SILL/JAMB (PER FT.) A2/28 TOTAL PRICE = $2, QTY. PART NO. DESCRIPTION LIST PRICE EXTENDED PAGE PBRBK 350 CHASSIS $1, $1, A2/ SPECIAL WIDTH CHARGE A2/ /16" MUNTIN A2/ CROSS RAIL / MUNTIN SET UP CHARGES , A2/ CONTINUOUS HINGE UP TO 8'0" A2/ P CO-9 S/A PUSH/PULL SET A2/ MS LOCK A2/ NORTON 1601BC CLOSER A3/ (2) CYLINDER (KEYED IN PAIRS) A2/ FLUSHBOLTS A2/13 TOTAL PRICE = $6,566.00

4 A2/4 PRICING EXAMPLES PRICING EXAMPLE #4 7'-0" Door Opening 3'-6" x 7'-0" 4'-6" x 7'-0" (RIGHT HAND SHOWN) 8'-0" D.O. AUTO SHOWROOM SWING TYPE #40 DARK BRONZE FINISH TRIFAB TM VG 450 FRAME (CENTER) BUTT HINGES - #29 BLACK FINISH QTY. PART NO. DESCRIPTION LIST PRICE EXTENDED PAGE Active Leaf SBVBK 190 CHASSIS $ $ A2/ SPECIAL WIDTH CHARGE A2/ BUTT HINGES A2/ BUTT HINGE FRAME PREPS A2/ P CO-9 S/A PUSH/PULL SET A2/ MS LOCK A2/ (2) CYLINDERS (KEYED IN PAIRS) A2/ NORTON 1601 CLOSER A3/2 Inactive Leaf SBVBK 190 CHASSIS A2/ SPECIAL WIDTH CHARGE A2/ SPECIAL WIDTH CHARGE A2/ BUTT HINGES A2/ BUTT HINGE FRAME PREPS A2/ PAIR OF FLUSHBOLTS A2/ FLUSHBOLT FRAME PREP A2/ RISER BLOCK A2/22 Framing JAMB (PER FT.) A2/ T-BAR/HEADER (PER FT.) A2/ THRESHOLD (PER FT.) A2/28 TOTAL PRICE = $3, PRICING EXAMPLE #5 QTY. PART NO. DESCRIPTION LIST PRICE EXTENDED PAGE Active Leaf 7'-0" Door Opening 3'-0" x 7'-0" 3'-0" x 7'-0" 3'-0" x 7'-0" #1 #2 (RIGHT HAND SHOWN) 9'-0" D.O. AUTO SHOWROOM BI-FOLD TYPE #22 BONE WHITE PAINT DOORS/FRAMES #29 BLACK FINISH HARDWARE TRIFAB VG 450 FRAME (CENTER) SBVBK 190 CHASSIS $ $ A2/ BUTT HINGES A2/ BUTT HINGE FRAME PREPS A2/ P CO-9 S/A PUSH/PULL SET A2/ MS LOCK A2/ (2) CYLINDERS (KEYED IN PAIRS) A2/ NORTON 1601 CLOSER A3/2 Inactive Leaf # SBVBK 190 CHASSIS A2/ CONTINUOUS HINGE A2/ PAIR OF FLUSHBOLTS A2/ FLUSHBOLT FRAME PREP A2/ RISER BLOCK A2/23 Inactive Leaf #2 Framing SBVBK 190 CHASSIS A2/ BUTT HINGES A2/ BUTT HINGE FRAME PREPS A2/ PAIR OF FLUSHBOLTS A2/ FLUSHBOLT FRAME PREP A2/ RISER BLOCK A2/ DOOR JAMB (PER FT.) A2/ T-BAR/HEADER (PER FT.) A2/ THRESHOLD (PER FT.) A2/28 TOTAL PRICE = $3,695.42

5 DOOR CHASSIS A2/5 Price includes: 1. Blank door up to 3'0" x 8'0". (For doors exceeding 4'0" x 8'0", consult factory.) 2. 1/4" beveled glass stops. 3. Glazing gaskets. Special door pricing add the following: 1. Base door chassis: As listed below. 2. Hinging hardware: Select the desired hinging method and add the price of the hardware. 3. Options: Add the price of all other options required for door and/or frame, be sure to add hardware and preparation charges. PART NUMBER STRUCTURE SAMPLE FOR BLANK DOORS PRODUCT CODE + HANDLE + PIVOTING + LOCKING 190 = 190 NARROW 350 = 350 MEDIUM 500 = 500 WIDE S = SINGLE P = PAIR BV = BEVELED STILE BR = BEVELED RABBETED RD = RADIUS BK = BLANK Door Chassis Narrow Stile 190 Medium Stile 350 Wide Stile 500 SINGLE PAIR SINGLE PAIR SINGLE PAIR DOOR OPENING SIZE UP TO 3'0" x 8'0" 6'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" 3'0" x 8'0" 6'0" x 8'0" Beveled Stiles For offset pivots or butt hung doors. PART NO. 190-SBVBK 190-PBVBK 350-SBVBK 350-PBVBK 500-SBVBK 500-PBVBK Bevel Rabbeted Stile For continuous hinge doors. Use of this stile will not affect glass sizes. PART NO. 190-SBRBK 190-PBRBK 350-SBRBK 350-PBRBK 500-SBRBK 500-PBRBK Radius Stiles (3) For center hung doors. PART NO. 190-SRDBK 190-PRDBK 350-SRDBK 350-PRDBK 500-SRDBK 500-PRDBK (3) Not applicable with InFrame interior framing. #17 GRP $ $ $ $1, $ $1, #40 GRP , , , #29 GRP , , , , Part Number Special Width Door $ Price

6 A2/6 DOOR GLAZING / WEATHERING OPTIONS Note: 1. All prices are per leaf unless noted otherwise. 2. When using 1/2" - 1" insulating glass stops and push bars are required, the use of double bend (CP-II) push bars in lieu of standard single bend (CP) push bars is suggested. Push/pull sets are listed on page A2/25. Glass Stop Options Standard Stops 5/16" Muntin Stops 1/4" Square (For 1/4" & 3/16" glass) 3/8" Square (For 5/16" & 3/8" glass) 1/2" Square (1) (For 7/16" & 1/2" glass) 5/8" Square (1) (For 9/16" & 5/8" glass) 3/4" Square (1) (For 11/16" & 3/4" glass) 1" Square (1) (For 1" glass) PART NO. #17 GRP #40 GRP #29 GRP $0.00 $0.00 $ (1) Recommendation: Add intermediate hinging as stated on pivoting hardware pages A2/11. Door Bottom Weathering PART NO. #17 GRP #40 GRP #29 GRP For 3'0" door $16.00 $18.00 $20.00 For 3'6" door Variable to 4'0" For 6'0" pairs '0" long '0" long

7 Note: 1. All prices are per leaf unless noted otherwise. DOOR BOTTOM RAIL SUBSTITUTIONS Fabricated Price A2/7 Substitute Bottom Rails PART NO. #17 GRP #40 GRP #29 GRP 6-1/2" Bottom Rail IN 190 DOOR $ $ $ IN 190 DOOR /2" Bottom Rail IN 350 OR 500 DOOR IN 190 DOOR " Bottom Rail IN 350 OR 500 DOOR " Bottom Rail IN 190 DOOR IN 350 OR 500 DOOR

8 A2/8 DOOR BOTTOM RAIL SUBSTITUTIONS Note: 1. All prices are per leaf unless noted otherwise. Fabricated Price Kick Plates with Built Up Bottom Rail PART NO. #17 GRP #40 GRP #29 GRP Built Up Bottom Rail Bottom Rail (Aluminum kick plates - applied, both sides) Reinforcement Rail (use if over 30" tall) Bottom Rail WEAR SHIELD (Black finish only. Applied push side standard. Double price for both sides.) UP TO 10" HIGH $ $ $ FOR EACH 3" ADDITIONAL INT. REINFORCING RAIL $ (NO FINISH) UP TO 10" HIGH FOR EACH 3" ADDITIONAL UP TO 10" HIGH FOR EACH 3" ADDITIONAL $90.00 (NO FINISH) $27.00 (NO FINISH) Bottom Rail Adaptors Adaptors (Applied) 7-1/2" ON STD /8" ON STD. 350/500 10" ON STD /8" ON STD. 350/500 12" ON STD /8" ON STD. 350/

9 DOOR CROSS RAILS / MUNTIN ADDITIONS A2/9 Notes: 1. All prices are per foot unless noted otherwise. 2. All cross rails/muntins include any of the glass stops listed on page A2/6. 3. Set-up charges are required with all cross rail/muntins. One charge per cross rail/muntin either as a horizontal or vertical. 4. When vertical muntins are required to create a grid configuration, square glass stops are standard. 5. When adding cross rails/muntins and push bars are required, use double bend (CP-II) push bars in lieu of standard single bend (CP) push bars. Push pulls sets are listed on page A2/25. Per Foot Price Cross Rails PART NO. #17 GRP #40 GRP #29 GRP 5/16" Muntin $ 7.00 $ 8.00 $ /8" Cross Rail /8" Cross Rail /4" Cross Rail /2" Cross Rail " Cross Rail /4" Cross Rail " Cross Rail

10 A2/10 DOOR CROSS RAIL / MUNTIN ADDITIONS Note: 1. All prices are per foot unless noted otherwise. 2. All cross rails/muntins include any of the glass stops listed on page A2/6. 3. Set-up charges are required with all cross rails/muntins. One charge per cross rail/muntin either as a horizontal or vertical. 4. When vertical muntins are required to create a grid configuration, square glass stops are standard. Barrier Free Option Cross Rail/Muntin Set-up Charge PART NO. Accessibility Decal $ Accessibility Push Shield Rail Set-up Charge (See sample below) Substitute Beveled Glass Stop in a Grid Configuration (Charge per lite opening) Price SAMPLE OF CROSS RAIL/MUNTIN SET-UP CHARGE The grid at right has a total of 8 rail set-up charges. Two (2) horizontal rail charges & six (6) vertical rail charges. (Horizontal rails always run through.) If beveled stops are required for this configuration, add 9 each (138717) lite charges above.

11 OFFSET PIVOTS / BUTT HINGES A2/11 Notes: 1. Refer to the general information section for hardware color combinations. 2. Prices for hardware listed are per item, I.E. select (6) butt hinges to receive 1-1/2" pairs of butts per leaf on a pair of doors. Price Offset Pivots Part No. #17 #40 #29 Top Offset Pivot (2) (Kawneer standard) Bottom Offset Pivot (2) (For use with threshold) HARDWARE + DOOR PREP $23.00 $24.00 $27.00 FRAME PREP HARDWARE + DOOR PREP FRAME PREP Bottom Offset Pivot (2) (For use without threshold) HARDWARE + DOOR PREP Bottom Offset Pivot (2) (Threshold mounted, for open back frames with & threshold) Intermediate Offset Pivot (2) (Kawneer standard) Intermediate Electric Transfer (2, 27) Offset Pivot (Kawneer standard) (Wiring prep not included) Optional Intermediate Offset Pivot (Rixson M-19 or IVES 7215) FRAME PREP (N/A WITHOUT THRESHOLD) HARDWARE + DOOR PREP HARDWARE + DOOR PREP FRAME PREP (INCLUDES REINFORCING) HARDWARE + DOOR PREP (INCLUDES OFFSET PIVOT & WIRING HARNESS) (RH) (LH) FRAME PREP (INCLUDES REINFORCING) HARDWARE + DOOR PREP FRAME PREP (INCLUDES REINFORCING) (2) Offset Pivot Paint Charge PER DOOR PAINT CHARGE A Butt Hinges 4-1/2" x 4" 304 Stainless Steel with N.R.P. (Rounded corner) (Powder coat painted finish) 4-1/2" x 4" N.R.P. Stainless Steel Ball Bearing Hinge (US 32D) (Rounded corner) 4-1/2" x 4" Electric Transfer (27) (Rounded corner) (Wiring prep not included) HARDWARE + DOOR PREP FRAME PREP (INCLUDES REINFORCING) HARDWARE + DOOR PREP A (US32D) FRAME PREP (INCLUDES REINFORCING) HARDWARE + DOOR PREP (INCLUDES HINGE & WIRING HARNESS) (27) For eight wire electric transfer consult factory. FRAME PREP (INCLUDES REINFORCING)

12 A2/12 OFFSET PIVOTS / BUTT HINGES Continuous Geared Hinge Part No. #17 #40 #29 Center Pivots Rule of Thumb for Adding Intermediate hinges Door Height Infill Weight Intermediate All Doors Greater than 5 lb per sq. ft. Add One (1) Hinge Over 7'3" Greater than 5 lb per sq. ft. Add Two (2) Hinges Over 7'6" Less than 5 lb per sq. ft. Add One (1) Hinge Over 8'3" Greater than 5 lb per sq. ft. Add Three (3) Hinges Over 8'6" Less than 5 lb per sq. ft. Add Two (2) Hinges CONTINUOUS GEARED HINGE / CENTER PIVOTS Note: 1. Refer to miscellaneous stock length section C/10 for finger protectors for use with center hung doors. 2. Prices for hardware listed are per item, I.E. select (2) bottom center pivots for a pair of doors. Up to 7'0" HARDWARE + DOOR PREP $ $ $ Up to 8'0" HARDWARE + DOOR PREP Bottom Center Pivot for Use with Threshold (3) (For C.O.C. or center hung free swing doors) Bottom Center Pivot for Use without Threshold (3) (For C.O.C. or center hung free swing doors) Top Center Pivot Kawneer Walking Beam Pivot (3) (For floor closer or center hung free swing doors) Top Center Pivot L.C.N. Walking Beam Pivot (3) (3) Not applicable with InFrame interior framing. Rule of Thumb for Adding Intermediate Pivots Door Height Infill Weight Intermediate Over 7'6" All Infills Add One (1) Pivot Price FRAME PREP HARDWARE + DOOR PREP FRAME PREP - TO THRESHOLD HARDWARE + DOOR PREP FRAME PREP (N/A WITHOUT THRESHOLD) DOOR HARDWARE FRAME HARDWARE FRAME PREP DOOR PREP DOOR + FRAME HARDWARE

13 STANDARD LOCKS A2/13 Notes: 1. Locking options do not include cylinders or lock operators. Select cylinders and lock operators separately. 2. Back set for all locks listed on this page is 1-1/8". 3. Refer to the general information section for hardware color combinations. Locking Hardware Options Part No. #17 #40 #29 Standard Adams Rite MS1850 Lock Price HARDWARE + DOOR PREP $37.00 $41.00 $45.00 SINGLE FRAME PREP HARDWARE + DOOR PREP PAIR FRAME PREP Adams Rite MS Short Throw Lock HARDWARE + DOOR PREP SINGLE FRAME PREP HARDWARE + DOOR PREP PAIR FRAME PREP Adams Rite MS Hookbolt Lock HARDWARE + DOOR PREP SINGLE FRAME PREP HARDWARE + DOOR PREP PAIR FRAME PREP Adams Rite 4510 Latch Lock HARDWARE + DOOR PREP OFFSET HUNG FRAME PREP SINGLE CENTER HUNG FRAME PREP (3) HARDWARE + DOOR PREP PAIR FRAME PREP Adams Rite MS+1890 Deadbolt Latch Lock (53" from bottom of door to center of cylinder) HARDWARE + DOOR PREP OFFSET HUNG FRAME PREP SINGLE CENTER HUNG FRAME PREP (3) HARDWARE + DOOR PREP PAIR FRAME PREP Kawneer Standard Flushbolts (4)(5) (For use on Pairs of doors with MS & latch locks) Note: 1. N/A with 3-Point lock conversion kit, or controller three point locking systems. Price includes: One (1) pair of flushbolts. Shuttered/Florida Approved Flushbolts (5) (For use on pairs of doors with MS & 3-Point dead lock) Price includes: One (1) pair of flushbolts. HARDWARE + DOOR PREP FRAME PREP HARDWARE + DOOR PREP FRAME PREP (3) Not applicable with InFrame interior framing. (4) Available with InFrame with threshold only. (5) Some building codes, with some qualifications, prohibit the use of manual flushbolts on exit doors needed to handle the occupant load of the building. Please consult with your local code to verify the use of manual flushbolts for your specific application.

14 A2/14 MULTI-POINT LOCK ADDITIONS Notes: 1. 3-point locking option does not include the MS lock, cylinders or lock operators. Select MS 1850 lock, cylinders and lock operators sold separately. 2. Back sets for all locks listed on this page 1-1/8". Multi-Point Locking Hardware Options Part No. Price CONTROLLER TM (3-Point Locking System) (3) For use in inactive leaf of pairs of doors only. Single acting applications only. Use with Adams Rite MS1850 lock. Adams Rite 4015 Two Point Lock (3) (For use in single or pairs of doors.) Includes conversion kit for standard MS1850 lock to 2-point lock. HARDWARE + DOOR PREP $ FRAME PREP (3) Not applicable with InFrame interior framing. Adams Rite Three Point Lock (3) (For use on pairs of doors only. N/A with flushbolts) Includes conversion kit for standard MS1850 lock to 3-point lock. Shutter/Florida Approved MS Three Point Lock Adams Rite 4016 Top Bolt & 4056 Threshold Bolt with Hurricane Guides (3) (For use on 350 and 500 doors only. Not available on 190 doors.) Includes conversion kit for standard MS1850 lock to 3-point lock. HARDWARE + DOOR PREP FRAME PREP (ONLY REQ'D. WITH THRESHOLD) HARDWARE + DOOR PREP FRAME PREP HARDWARE + DOOR PREP FRAME PREP

15 ACCESSORIES FOR STANDARD LOCKS A2/15 Note: 1. Refer to the general information section for hardware color combinations. Accessories for use with Locking Hardware Options on Page A2/13 & A2/14 Price Part No. #17 #40 #29 Adams Rite 4560 Lever Handle (For use on 4510 Latch Lock only) Standard 3-1/2" handle. Adams Rite 4565 Emergency Handle (For use on 4510 or MS+1890 latch locks only) Optional 1-1/2" handle. Adams Rite 4590 Latch Paddle (For use on 4510 or MS1890 latch locks only) Optional paddle. HARDWARE + DOOR PREP $ $ $ HARDWARE + DOOR PREP HARDWARE + DOOR PREP Adams Rite 7130 Electric Strike (For use on 4510 latch locks only.) Wiring & additional electric transfer for pair of doors not included. SINGLE HARDWARE ONLY CONTINUOUS DUTY (NO DOOR PREP) PAIR Exit indicator MS Cylinder Guard (For use with Kawneer standard cylinders.) Note: N/A with exit devices. Cylinder for MS & Latch Locks Price includes: 1. Hardware + door prep. Thumbturn for MS Locks Note: N/A with exit devices and 4510 latch locks. HARDWARE ONLY INTERMITTENT DUTY (NO DOOR PREP) FRAME PREP HARDWARE + DOOR PREP CONTINUOUS DUTY HARDWARE + DOOR PREP INTERMITTENT DUTY FRAME PREP (N/A WITH PAIRS) HARDWARE + DOOR PREP HARDWARE + DOOR PREP KEYED INDIVIDUALLY KEYED IN PAIRS (INCLUDES 2-CYLINDER) KEYED ALIKE (in groups of 50) USE IN PLACE OF CYLINDER

16 A2/16 CONCEALED EXIT DEVICES AND ACCESSORIES Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for 3'0" x 7'0" door leaf. For special size concealed exit devices use part and add $60.00 list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Concealed Rod Exit Device Kawneer 1686 Concealed Rod Exit Device (4) Exit device Kawneer 1686 Concealed Rod Exit Device (4) Exit device with cylinder dogging Cylinder with mounting pad for Exit Devices (4) (For use with Kawneer 1686 exit device) Note: N/A with Paneline type exit devices. Price HARDWARE + DOOR PREP $ $ FRAME PREP HARDWARE + DOOR PREP CD FRAME PREP Kawneer 1686 Lever Handle KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50) Falcon Concealed Rod Exit Device HARDWARE + DOOR PREP Cylinder KEYED INDIVIDUALLY Falcon 1690 Exit Device (4) Exit device. Falcon 1990 Concealed Rod Exit Device (4) Crash bar exit device. Kawneer concealed exit device Cylinder for Exit Devices (4) (For use with Falcon 1690 and 1990 exit devices) Note: N/A with Paneline type exit devices. KEYED ALIKE (in groups of 50) DUMMY CYLINDER HARDWARE + DOOR PREP FRAME PREP HARDWARE + DOOR PREP FRAME PREP (4) Available with InFrame with threshold only. KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50)

17 CONCEALED EXIT DEVICES AND ACCESSORIES A2/17 Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" x 7'0" door leaf. For special size concealed exit devices use part and add $60.00 list per leaf. Concealed Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Adams Rite 8600 Concealed Rod Exit Device Adams Rite 8600 Concealed Exit Device (4) Escutcheon Plate Cylinder Guard (4) (For use with Adams Rite 8600 concealed exit devices, when cylinder is required.) Cylinder for Adams Rite 8600 (4) Price includes: Hardware and door prep. (4) Available with InFrame with threshold only. Price HARDWARE + DOOR PREP $ $ $ FRAME PREP HARDWARE + DOOR PREP KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50)

18 A2/18 RIM EXIT DEVICES AND ACCESSORIES Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size rim exit devices use part and add $50.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Kawneer Rim Exit Device Kawneer 1786 Rim Exit Device Exit device with hex key dogging Kawneer 1786 Rim Exit Device Exit device with cylinder dogging Kawneer 1786 Lever Handle Price HARDWARE + DOOR PREP $ $ FRAME PREP (SINGLE DOOR) HARDWARE + DOOR PREP CD FRAME PREP HARDWARE + DOOR PREP Cylinder KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50) DUMMY CYLINDER RM-86 Removable Mullion (For use with pairs of 1786 rim exit devices.) For Kawneer 1786 Exit Device UP TO 7'0" HARDWARE UP TO 8'0" HARDWARE UP TO 10'0" HARDWARE , , FRAME PREP Cylinder for Exit Devices (4) (For use with Falcon 1690 and 1990 exit devices) Note: N/A with Paneline type exit devices. KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50)

19 RIM EXIT DEVICES AND ACCESSORIES A2/19 Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size rim exit devices use part and add $50.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf. Double for pairs of doors. Part No. #17 #40 #29 Falcon Rim Exit Device Falcon 1790 Rim Exit Device Rim exit device. Falcon 2090 Rim Exit Device Crash bar exit device. (See page A2/16 for cylinder.) Falcon RM-170/RM-70 Removable Mullion (For use with pairs for 1790 & 2090 rim exit devices.) Price HARDWARE + DOOR PREP $ $ $ FRAME PREP (Single Door) HARDWARE + DOOR PREP FRAME PREP (Single Door) Price includes (2) interlocking mullion stabilizers maximum height of 8'0". RM-170 for 1790 exit device UP TO 7'0" HARDWARE UP TO 8'0" HARDWARE , , FRAME PREP RM-70 for 2090 exit device UP TO 7'0" HARDWARE UP TO 8'0" HARDWARE , , FRAME PREP Cylinder for Exit Devices (4) (For use with Falcon 1690 and 1990 exit devices) Note: N/A with Paneline type exit devices. KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50)

20 A2/20 RIM EXIT DEVICES AND ACCESSORIES Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. 3. Prices are for a 3'0" wide door leaf. For special size rim exit devices use part and add $50.00 list per leaf. 4. Rim exit devices not compatible on center hung doors with standard frame offerings. Rim Exit Device Hardware Options Note: Hardware + door preparation prices are per leaf double for pairs of doors. Part No. #17 #40 #29 Adams Rite 8400 Mortise Type Exit Device Adams Rite 8400 Mortise Type Exit Device SINGLE (4) HARDWARE + DOOR PREP Cylinder for Adams Rite 8400 Price includes: Hardware and door prep. Strike Plate (For Adams Rite 8400) (4) Available with InFrame with threshold only. Price FRAME PREP KEYED INDIVIDUALLY KEYED ALIKE (in groups of 50) HARDWARE + DOOR PREP

21 KAWNEER PANELINE TM & ACCESSORIES A2/21 Notes: 1. Exit device options do not include the cylinders or pull handles. Select cylinders and pull handles separately. 2. Refer to the general information section for hardware color combinations. Exit Device Hardware Options Fabricated Price Part No. #17 GRP #40 GRP #29 GRP Paneline TM Exit Device (3) Includes Paneline TM concealed rod device. Paneline TM EL (Refer to Access Control section) Select CPN, CO-9 or CO-12 pull separately. Note: CO-9 and CO-12 not recommended for use on 190 narrow stile doors. (Price is for one leaf) Paneline TM Exit Device (3) with Cylinder Dogging Includes Paneline TM concealed rod device and cylinder dogging assembly. Select CPN, CO-9 or CO-12 pull separately. Note: CO-9 and CO-12 not recommended for use on 190 narrow stile doors. (Price is for one leaf) Dummy Paneline TM Rail (3) Add to doors without locking hardware only. STD. 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP $ $ $ NON 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP , SINGLE RX SWITCH DOUBLE RX SWITCH FRAME PREP STD. 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP CD , , NON 3'0" WIDTH DOOR LEAF HARDWARE + DOOR PREP CD 1, , , Price includes dummy rail assembly installed in door. Select CPN, CO-9 or CO-12 pull separately. Matches appearance of active panel in dogged position. (Price is for one leaf) (3) Not applicable with InFrame interior framing. Cylinder for Paneline TM Exit Device (3) Note: Use with Paneline TM. Paneline TM Cylinder Guard (3) Note: For Paneline TM Exit Device with CPN pull. HARDWARE + DOOR PREP Price Part No. #17 #40 #29 KEYED INDIVIDUALLY KEYED ALIKE (In groups of 50)

22 A2/22 AUTO SHOWROOM ACCESSORIES, STANDARD AUTO SHOWROOM SPECIFICATIONS Auto Showroom Accessories Part No. Price 7'-0" Door Opening Aluminum Riser Block Standard for bi-fold door and large inactive door leaf. Plastic Riser Block Optional for bi-fold door and large inactive door leaf. Caster Optional for bi-fold door and large inactive door leaf. Special Width Auto Showroom Door For each additional 1' increment. Auto Showroom Door Bottom Weathering Variable to 5'0" for large inactive door leaf. 3'-6" x 7'-0" 4'-6" x 7'-0" 10'-3-1/2" STANDARD AUTO SHOWROOM SPECIFICATIONS SWING TYPE ENTRANCES (TRANSOM UNIT) 7'-0" Door Opening 3'-0" x 7'-0" 3'-0" x 7'-0" #17 GRP BI-FOLD TYPE ENTRANCES (TRANSOM UNIT) 3'-0" x 7'-0" #1 #2 10'-3-1/2" $55.00 (NO FINISH) (NO FINISH) (NO FINISH) (NO FINISH) #40 GRP #29 GRP (RIGHT HAND SHOWN) 8'-0" D.O. Standard Configuration Includes: Active Leaf = 3'6" x 7'0" 190/350/500 active door leaf with style CO-9 push/pull hardware, 1 set butt hinges, MS lock, with cylinders, and surface closers. Inactive Leaf = 4'6" x 7'0" 190/350/500 inactive door leaf with flushbolts, riser block, and 1-1/2 pair butt hinges. Framing = TRIFAB TM VG 450 center frame with threshold. Note: Maximum inactive door leaf width is 5'0". 1/4" infill only. Offset pivots or continuous gear hinges optional. Door opening width to 9'0". Overall frame height of 8'1-3/4" without transom. MAXIMUM ALLOWABLE SIZES AND RESTRICTIONS (THIS PAGE): (RIGHT HAND SHOWN) 9'-0" D.O. Standard Configuration Includes: Active Leaf = 3'0" x 7'0" 190/350/500 active door leaf with style CO-9 push/pull hardware, 1 set butt hinges, MS lock, with cylinders, and surface closers. Inactive Leaf = 3'0" x 7'0" 190/350/500 inactive door leaf #1 with flushbolts, riser block, and 1 continuous hinge. Inactive Leaf = 3'0" x 7'0" 190/350/500 inactive door leaf #2 with flushbolts, riser block, and 1-1/2 pair butt hinges. Framing = TRIFAB TM VG 450 center frame with threshold. Door opening height to 8'0". Overall frame height of 12'0" with transom. For hardware options not listed in the A2 section of the price book, please contact factory.

23 AUTO SHOWROOM ACCESSORIES, NON-IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS A2/23 Auto Showroom Accessories Part No. Price Aluminum Riser Block Standard for bi-fold door. Plastic Riser Block Optional for bi-fold door. Caster Optional for bi-fold door. Special Width Auto Showroom Door For each additional 1' increment. Auto Showroom Door Bottom Weathering Variable to 5'0" for large inactive door leaf. 3'-0" x 7'-0" 3'-0" x 7'-0" 3'-0" x 7'-0" NON-IMPACT RESISTANT AUTO SHOWROOM SPECIFICATIONS 7'-0" Door Opening ± 70 PSF Maximum Design Pressure BI-FOLD TYPE ENTRANCES #1 #2 #17 GRP $55.00 (NO FINISH) (NO FINISH) (NO FINISH) (NO FINISH) #40 GRP #29 GRP (RIGHT HAND SHOWN) 9'-0" D.O. Non-Impact Resistant Configuration Includes: Active Leaf = 3'0" x 7'0" 350/500 active door leaf with style CO-9 push/ pull hardware, 1 continuous hinge, MS lock + 3-point lock, with cylinders, and surface closers. Inactive Leaf = 3'0" x 7'0" 350/500 inactive door leaf #1 with impact resistant flushbolts, riser block, and 1 continuous hinge. Inactive Leaf = 3'0" x 7'0" 350/500 inactive door leaf #2 with impact resistant flushbolts, riser block, and 1 continuous hinge. Framing = TRIFAB TM VG 450 center frame with threshold. MAXIMUM ALLOWABLE SIZES AND RESTRICTIONS (THIS PAGE): 1/4" infill dry glazed only. Door opening width to 10'0". Door opening height to 8'0". Active door 4'0" wide.

24 A2/24 BLANK PAGE THIS PAGE LEFT INTENTIONALLY BLANK

25 ARCHITECTS CLASSIC PUSH / PULL SETS A2/25 Notes: 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Architects Classic Push/Pull Sets Style CO-9/CP Style CO-12/CP Style CP Push Bars (2) Style CO-9/CP-II Not for use on D/A doors. Style CO-12/CP-II Not for use on D/A doors. Style CP-II Push Bars (2) Not for use on D/A doors. Style CO-9/CO-9 Style CO-12/CO-12 Finish Group Part No. NO. 1 NO. 2 NO.3 = 3'0" P $ $ $ = 3'6" P VAR. TO 4'0" P = 3'0" P = 3'6" P VAR. TO 4'0" P = 3'0" P = 3'6" P VAR. TO 4'0" P = 3'0" P = 3'6" P VAR. TO 4'0" P = 3'0" P = 3'6" P VAR. TO 4'0" P = 3'0" P = 3'6" P VAR. TO 4'0" P PER LEAF P PER LEAF P Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

26 A2/26 EXIT DEVICE PULLS Notes: 1. Push/pull prices are per leaf and include attachment screws and the preparation to the door. 2. For pairs of doors, (2) sets are required. 3. Refer to the general information section for hardware color combinations. Exit Device Pulls Push Bar for Auto Showroom Style CO-9 For one (1) style CO-9 pull handle. Style CO-12 For one (1) style CO-12 pull handle. Style CPN For use with RH Paneline unit. For use with LH Paneline unit. For use with RH Dummy Paneline unit. For use with LH Dummy Paneline unit. For one (1) style CPN pull handle. Style CP-II Finish Group Part No. NO. 1 NO. 2 NO P $ $ $ P P P P P N/A N/A Variable to 5'0" for use on large inactive door leaf P Color Material Identification Aluminum, Clear Anodized #14 Black Permanodic TM #29 Dark Bronze Permanodic TM #40 Stainless Steel, US 32 #45 US 32D #46 (N/A in #47) Bronze, US 10B #44 Bright Brass, PVD (US 3) #47

27 TRIFAB TM 400 FRAMING SYSTEM (1-3/4" x 4") A2/27 Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM 400 Framing System (1-3/4" x 4") Screw Spline Mullion Head/Jamb Horizontal Sill Expansion Mullion (6) Sill Flashing PART NO #17 GRP $18.16 $13.76 $21.51 $15.50 $19.86 $5.53 #40 GRP #29 GRP Shear Block Mullion Head/Jamb Horizontal Sill Expansion Mullion (6) Sill Flashing PART NO #17 GRP $13.92 $13.43 $19.48 $15.50 $19.86 $5.53 #40 GRP #29 GRP Special Moldings Add for each 3" over 10" per foot Door Jamb (7) Header/T-Bar (7) Sidelite Base Base Built-up Sidelite Base Threshold Threshold Standard Tall Sidelite Std. 4" Optional 6-3/4" PART NO #17 GRP $15.40 $20.81 $21.20 $26.58 $86.49 $6.12 $4.36 $10.02 #40 GRP (#10 Mill) (#10 Mill) #29 GRP Special Moldings 0-25 Corner 90 Corner 135 Corner Mull. Half for Var. Corner 4" x 4-1/2" Sidelite Base Steel Reinforcing PART NO #17 GRP $29.92 $29.86 $30.26 $12.26 $28.07 $28.00 #40 GRP (Primed) #29 GRP (6) Steel reinforcement not available for expansion mullion. (7) Specify S/A or D/A when ordering.

28 A2/28 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2") Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 450 Framing System (1-3/4" x 4-1/2") Screw Spline Mullion Head Horizontal Sill/Jamb Expansion Mullion Transom Head Sill Flashing HP Sill Flashing PART NO #17 GRP $19.81 $16.57 $19.86 $15.46 $22.20 $14.44 $5.72 $8.85 #40 GRP #29 GRP Shear Block Mullion Head Horizontal Sill/Jamb Expansion Mullion Transom Head Sill Flashing HP Sill Flashing PART NO #17 GRP $15.77 $16.57 $19.86 $14.44 $22.20 $14.44 $5.72 $8.85 #40 GRP #29 GRP Special Moldings Add for each 3" over 10" per foot. Door Jamb (7) Header/T-Bar (7) Door Jamb (7) T-Bar (7) Sidelite Base Base Built-up Sidelite Base Front/Back (8) Front/Back (8) Standard Tall Sidelite PART NO #17 GRP $16.30 $22.25 $20.58 $26.88 $21.20 $26.58 $86.49 $6.12 #40 GRP #29 GRP Special Moldings 0-25 Corner 90 Corner 135 Corner Mull. Half for Var. Corner 4-1/2" x 4-1/2" Sidelite Base Steel Reinforcing Std. 4" Threshold Optional 6-3/4" Threshold PART NO #17 GRP $33.83 $32.27 $32.39 $13.18 $32.79 $35.00 $4.36 $10.02 #40 GRP (Primed) (#10 Mill) (#10 Mill) #29 GRP (7) Specify S/A or D/A when ordering. (8) Specify front or back glass plane when ordering.

29 TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2") A2/29 Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 451 Framing System (2" x 4-1/2") Screw Spline Mullion Head Horizontal (9) Sill/Jamb (10) Mullion Transom Head Sill Flashing HP Sill Flashing Expansion PART NO #17 GRP $20.18 $17.15 $20.28 $16.20 $23.31 $15.34 $5.72 $8.85 #40 GRP #29 GRP Shear Block Mullion Head Horizontal (9) Sill/Jamb (10) Mullion Transom Head Sill Flashing HP Sill Flashing Expansion PART NO #17 GRP $16.46 $17.15 $20.28 $15.34 $23.31 $15.34 $5.72 $8.85 #40 GRP #29 GRP Special Moldings Add for each 3" over 10" per foot. Door Jamb (7) Header/ T-bar (7)(11) (8) Front/Back Door Jamb (7) (8) Front/Back T-bar (7)(10) Standard Sidelite Base (10) Tall Sidelite Base (10) Built-up Sidelite Base PART NO #17 GRP $16.94 $22.52 $21.22 $27.15 $21.20 $26.58 $86.49 $6.12 #40 GRP #29 GRP Special Moldings 0-25 Corner 90 Corner 135 Corner Mull. Half for Var. Corner 4-1/2" x 4-1/2" Sidelite Base (10) Center Door Jamb Steel Reinforcing Std. 4" threshold Optional 6-3/4" threshold PART NO #17 GRP $33.42 $32.16 $33.08 $13.92 $32.79 $35.00 $4.36 $10.02 #40 GRP (Primed) (#10 Mill) (#10 Mill) #29 GRP (7) Specify S/A or D/A when ordering. (8) Specify front or back glass plane when ordering. (9) To substitute silicone setting blocks, use part number , and add $1.00 per foot. (10) To substitute silicone setting blocks, use part number , and add $3.00 per foot. (11) To substitute silicone setting blocks, use part number , and add $4.40 per foot.

30 A2/30 TRIFAB TM VG 450 FRAMING SYSTEM (1-3/4" x 4-1/2" CENTER) HIGH VELOCITY HURRICANE ZONE NON-IMPACT APPLICATIONS Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 450 Framing System (1-3/4" x 4-1/2" Center) Screw Spline Jamb Mullion Head Horizontal Sill HP Sill Flashing PART NO #17 GRP $16.50 $19.81 $17.61 $19.86 $15.46 $8.85 #40 GRP #29 GRP Shear Block Door Jamb Door Jamb (12)(13) w/pocket Filler (13) Header/T-Bar Header/T-Bar PART NO #17 GRP $19.89 $21.19 $24.92 $33.14 #40 GRP #29 GRP Special Moldings Mullion Steel Door Jamb Steel Door Jamb Steel Std. 4" 4-1/2" x 4-1/2" 4-1/2" x 4-1/2" 4-1/2" x 4-1/2" 4-1/2" x 4-1/2" Reinforcing Reinforcing Reinforcing Threshold Jamb Mullion Horizontal Sill PART NO #17 GRP $31.62 $32.27 $39.35 $32.79 $35.00 $53.00 $57.00 $4.36 #40 GRP (Primed) (Primed) (Primed) (#10 Mill) #29 GRP (12) Pick up shim backer from section C1 page C1A/14. (13) For single acting doors only.

31 Price Includes: 1. Fabrication of special frames. (Door framing/sidelites/fixed areas, etc.). 2. Applicable glass stops. 3. Glazing gaskets. 4. Frame clips & screws (joint charges included). 5. Framing is factory fabricated and shipped K.D. TRIFAB TM VG 451 FRAMING SYSTEM (2" x 4-1/2" CENTER) HIGH VELOCITY HURRICANE ZONE NON-IMPACT APPLICATIONS Not included: 1. Perimeter fasteners or preparation. 2. Perimeter receptors or sill flashing. 3. Brakes or special fillers. 4. Sash or sash attachment. 5. Assembly of frame. A2/31 Pricing notes: 1. Determine the total linear feet of framing required and multiply by the linear per foot charge of the framing members you select (to the next larger foot). 2. Add the frame preparation charges for any options required. 3. Consult architectural details for structural limitations. 4. For joints other than 90, contact the factory for pricing. Trifab TM VG 451 Framing System (2" x 4-1/2" Center) Screw Spline Jamb Mullion Head Horizontal (9) Sill (10) HP Sill Flashing PART NO #17 GRP $17.29 $20.19 $18.30 $20.28 $16.20 $8.85 #40 GRP #29 GRP Special Moldings Door Jamb (13)(14) Pocket Filler (13) T-Bar (11)(13) T-Bar (11)(13) Door Jamb w/ Header/ Header/ PART NO #17 GRP $20.33 $21.18 $25.22 $33.55 #40 GRP #29 GRP Special Moldings 4-1/2" x 4-1/2" Mullion Steel Door Jamb Steel Door Jamb Steel Std. 4" 4-1/2" x 4-1/2" 4-1/2" x 4-1/2" 4-1/2" x 4-1/2" Reinforcing Reinforcing Reinforcing Threshold Jamb Mullion Horizontal (10) Sill (10) PART NO #17 GRP $31.52 $32.80 $39.35 $32.79 $35.00 $53.00 $57.00 $4.36 #40 GRP (Primed) (Primed) (Primed) (#10 Mill) #29 GRP (9) To substitute silicone setting blocks, use part number , and add $1.00 per foot. (10) To substitute silicone setting blocks, use part number , and add $3.00 per foot. (11) To substitute silicone setting blocks, use part number , and add $4.40 per foot. (13) For Single Acting doors only. (14) Pick up shim from section C2, page C2/16.

SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5

SECTION A4...IMPACT RATED ENTRANCES* 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 CONTENTS SECTION A4...IMPACT RATED ENTRANCES* Impact Rated Entrances CONTENTS PAGE FINISH GROUPS... A4/3 350 IR/500 IR ENTRANCES ENTRANCE HARDWARE OFFERINGS... A4/5 A4/1 350 IR/500 IR BASE DOOR DOOR CHASSIS...

More information

FINISH GROUPS #17 GRP #17 CLEAR

FINISH GROUPS #17 GRP #17 CLEAR EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER

More information

350/500 HEAVY WALL TM IR ENTRANCES 1

350/500 HEAVY WALL TM IR ENTRANCES 1 JUNE, 202 30/00 HEAVY WALL TM IR ENTRANCES FEATURES Blast Mitigation Product Features 30 medium stile has 3-/2" vertical stile, 3-/2" top and 6-/2" bottom rail 00 wide stile has " vertical stile, " top

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features OCTOBER, 05 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom rail.

More information

350/500 IR Entrances. Features

350/500 IR Entrances. Features SEPTEMBER, 07 Features FEATURES Blast Mitigation Product 50 IR medium stile has vertical stiles, top and 6-/" (65.) bottom rails 500 IR wide stile has (7) vertical stile, (7) top and 6-/" (65.) bottom

More information

350/500 Heavy Wall TM IR Entrances

350/500 Heavy Wall TM IR Entrances SEPTEMBER, 207 FEATURES Hurricane Resistant Product Blast Mitigation Product Features 50 Heavy Wall TM IR medium stile has vertical stiles, top and 6-/ (65.) bottom rails 500 Heavy Wall TM IR wide stile

More information

custom entrances and hardware

custom entrances and hardware custom entrances and hardware Table of Contents Custom Entrances (B1) Loose Hardware and Fabrication (B2) Custom Entrances and Modifications (B1) Table of Contents Entrance Door Handing page 3 CUSTOM ENTRANCES

More information

350 IR ENTRANCES INDEX

350 IR ENTRANCES INDEX 50 IR ENTRANCES INDEX Hurricane Resistant Product PICTORIAL VIEW... IR 500 ENTRANCE FRAMING DETAILS... 4 IR 50 ENTRANCE FRAMING DETAILS... 5 TRIFAB VG 450 FRAMES / 600 WALL SUB-FRAMES...6 INFILL OPTIONS

More information

FLUSHLINE ENTRANCES. Features

FLUSHLINE ENTRANCES. Features OCTOBER, 2006 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with a face sheet of fiberglass reinforced polyester (FRP) or aluminum, that is captured on four sides by integral extruded reglets

More information

Flushline TM Entrances

Flushline TM Entrances FEATURES Hurricane Resistant Product Blast Mitigation Product 1 Features Flush appearance with face sheet of aluminum or fiberglass reinforced polyester (FRP) that is captured on four sides by integral

More information

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED

More information

WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents

WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary

More information

InFrame TM Interior Framing System

InFrame TM Interior Framing System JANUARY, 2017 InFrame TM Interior Framing System FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8"

More information

Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated

Interior framing system Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated JULY, 2014 InFrame TM FEATURES 1 Features x 6" sightline, interior partition framing Flush glazed, center plane glass application Screw spline fabrication 1/8", 1/4", and 3/8" infill options Permanodic

More information

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20

PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20 Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty

More information

1010 Sliding Mall Front

1010 Sliding Mall Front JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom

More information

GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355

GAMCO CORPORATION GAMCO QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS. Est GAMCO CATALOG Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS GAMCO CATALOG 131-10 Maple Avenue, Flushing NY 11355 GAMCO CORPORATION QUALITY FENESTRATION SYSTEMS & ARCHITECTURAL METALS TABLE OF

More information

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to

More information

7.01. Door Hardware & Accessories

7.01. Door Hardware & Accessories 7.01 Door 7.02 Mid-Panel Concealed Vertical Rod Panic First Choice 3100 Series Exit Device 7.03 P092 Mortised Butt Hinge Both leaves of this hinge are punched and countersunk so they can be mortised into

More information

Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4

Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4 Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628

More information

Storefront Installation Guide INSTALLATION INSTRUCTIONS

Storefront Installation Guide INSTALLATION INSTRUCTIONS STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.

More information

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors

Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Standard Aluminum Swing Entrance Doors E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BALLISTIC GRADE Series D200 Narrow Stile Series D300 Medium Stile * D500 Wide Stile ** Manufacturer Configurations Narrow

More information

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)

DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B) SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets

More information

2.01 Standard Entrances Description

2.01 Standard Entrances Description 2.01 Standard Entrances Description Description Tubelite Standard Entrances have an outstanding reputation for craftsmanship and strength. The Narrow Stile Door has a face dimension of 2 1/8" and is designed

More information

STANDARD ENTRANCES TECHNICAL MANUAL

STANDARD ENTRANCES TECHNICAL MANUAL TECHNICAL MANUAL FEATURES FEATURES Narrow stile doors have a 2 1/2" top rail, 3 7/16" bottom rail, and 2 1/16" vertical stiles Medium stile doors have a 3 7/16" top rail, 6 7/16" bottom rail, and 3 7/16"

More information

Mortise Locks 185 Series

Mortise Locks 185 Series Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 11/8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628

More information

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls

More information

Architectural Hardware

Architectural Hardware Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant

More information

AA TM 3900 THERMAL SLIDING DOOR

AA TM 3900 THERMAL SLIDING DOOR OCTOBER, 2010 AA TM 3900 THERMAL SLIDING DOOR FEATURES 1 Features High performance ratings for structural, air infiltration, thermal efficiency and water resistance. Tested to applicable North American

More information

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE

Infinity 20 Min. FIRE RATED DOORS WARNOCK HERSEY INFINITY - STANDARD RAISED - 20 MIN. RATING SOFTWOOD STILE Infinity 20 Min Note: 20 Minute (Positive Pressure) Category A & B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 9/0 Standard

More information

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options DB1000 SERIES Heavy-Duty Tubular Grade 1 Deadbolts Standard Features n Performance Complies with ANSI A156.5, Grade 1, 250,000 cycles n Chassis Tubular, steel n Deadbolt 1" x 2-1/4", square corner faceplate,

More information

JAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows

JAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows Fixed, Projected and Casement Steel Windows Hope s Jamestown Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are -/" in depth.

More information

OFFSET PIVOTS STOREFRONT HARDWARE

OFFSET PIVOTS STOREFRONT HARDWARE Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to

More information

Pivots / Padlocks / Hasps

Pivots / Padlocks / Hasps / Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,

More information

MANUFACTURER & WHOLESALER OF WINLY PRODUCTS

MANUFACTURER & WHOLESALER OF WINLY PRODUCTS MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and

More information

Illustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty.

Illustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty. Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. Exterior Glazed Back Members for 1" Glass Illustration Part Description Base List Weight/ Ft./ Box Price/S.L. S.L. S.L. Qty.

More information

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS ` FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard

More information

Masonry Frames Interior/Exterior* Drywall Frames Interior**

Masonry Frames Interior/Exterior* Drywall Frames Interior** Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal

More information

Swing Door Installation Manual

Swing Door Installation Manual Manual 20D/35D/50D 20DH/35DH 40M/50M 25FD 35XT 50XT 01-4000-03 2010 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes.......................................

More information

This section describes the design requirements and materials/products for door hardware.

This section describes the design requirements and materials/products for door hardware. Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran

More information

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS These requirements apply to all fire rated doors, frames, and windows. Requirements for the installation of these assemblies are included in the Standard

More information

MODEL: STORMMAX-MSD-FG-5000-WET

MODEL: STORMMAX-MSD-FG-5000-WET MODEL: STORMMAX-MSD-FG-5000-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - WET GLAZED OHSC H6331 O.H.C.C H6333 MID-PANEL MEETING STILES HD6184 HD6186 VD6145

More information

INSTALLATION INSTRUCTIONS Frames and Entrance Doors

INSTALLATION INSTRUCTIONS Frames and Entrance Doors INSTALLATION INSTRUCTIONS Frames and Entrance Doors J 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com A Division of Coral Industries, Inc. FRAMES and ENTRANCES

More information

MODEL: STORMMAX-MSD-FG-5100-WET

MODEL: STORMMAX-MSD-FG-5100-WET MODEL: STORMMAX-MSD-FG-5100-WET MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - DRY GLAZED O.H.C.C H6333 HD6184 MID-PANEL HD6186 MEETING STILES VD6145 JAMB V6331

More information

930 Series Mortice Exit Device

930 Series Mortice Exit Device 930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel

More information

YES 45 TU Thermal Storefront System Installation Manual

YES 45 TU Thermal Storefront System Installation Manual Installation Manual 2004 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS DESCRIPTION Framing

More information

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction. Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.

More information

UNIVERSITY SERIES Fixed, Projected and Casement Steel Windows

UNIVERSITY SERIES Fixed, Projected and Casement Steel Windows Fixed, Projected and Casement Steel Windows Hope's University Series steel window profiles were designed for projects requiring historic replication of exterior putty glazed steel windows. The fixed and

More information

MODEL: STORMMAX-MSD-FG-5000-DRY

MODEL: STORMMAX-MSD-FG-5000-DRY MODEL: STORMMAX-MSD-FG-5000-DRY MEDIUM STILE HURRICANE RESISTANT DOORS WITH FG-5000 FRAMES MONOLITHIC LAMINATED GLASS - DRY GLAZED OHSC H6331 O.H.C.C H6333 MID-PANEL MEETING STILES HD6184 HD6186 VD6145

More information

Suggested List Price. Aluminum Store Front Hardware. January 13, U.S. Dollars

Suggested List Price. Aluminum Store Front Hardware. January 13, U.S. Dollars U.S. Dollars Aluminum Store Front Hardware Suggested List Price January 13, 2014 Exit Devices - 120 Series - Mechanical and Electrified... 2 Exit Devices - 120 Series - Accessories and Parts... 3 Deadbolt

More information

ELEPHANT DOOR SYSTEMS SERIES E1200

ELEPHANT DOOR SYSTEMS SERIES E1200 INSTALLATION INSTRUCTIONS ELEPHANT DOOR SYSTEMS SERIES E1200 Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com AVDB3096 03.13 TABLE OF CONTENTS SUBJECT PAGE GENERAL INSTALLATION

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.

More information

YES 40 FS/FI Storefront System Installation Manual

YES 40 FS/FI Storefront System Installation Manual Installation Manual 2014 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes... Page ii PARTS DESCRIPTION YES 40 FS Framing Members... Page 1 YES 40

More information

FOLDING GLASS WALL SYSTEMS

FOLDING GLASS WALL SYSTEMS FOLDING GLASS WALL SYSTEMS SERIES SI3000 A seamless wall with endless possibilities. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations since their introduction

More information

Thermally Broken Framing and Door Installation

Thermally Broken Framing and Door Installation INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

Product Catalog. hardwaresuppliers.com

Product Catalog. hardwaresuppliers.com Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise

More information

Steel Hawk 4300 Electrified Deadlatch (elatch)

Steel Hawk 4300 Electrified Deadlatch (elatch) STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or

More information

3000 Series Exit Devices Premier Product

3000 Series Exit Devices Premier Product 00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.

More information

Victory Fire Door Inspections

Victory Fire Door Inspections Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire

More information

Sliding Glass Door Assembly and Installation Guide

Sliding Glass Door Assembly and Installation Guide Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all

More information

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse

Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates

More information

s tops & holder s Absolute Door Control and Entire Opening Protection

s tops & holder s Absolute Door Control and Entire Opening Protection check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or

More information

GLASSvent TM Windows for Storefront Framing

GLASSvent TM Windows for Storefront Framing MARCH, 05 GLASSvent TM Windows for Storefront Framing INDEX PROJECT-OUT WINDOW... 3-8 OUTSWING CASEMENT WINDOW... 9-4 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,

More information

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are

More information

Solid Core Wood Door / Steel Frame Packages

Solid Core Wood Door / Steel Frame Packages Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0

More information

YES 45 FS/FI Storefront System Installation Manual

YES 45 FS/FI Storefront System Installation Manual Installation Manual 2014 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes... Page ii PARTS DESCRIPTION YES 45 FS Framing Members... Page 1 YES 45

More information

YES 600 Thermal Clip Storefront System Installation Manual

YES 600 Thermal Clip Storefront System Installation Manual Installation Manual 2004 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii Frame Types............................................

More information

YES 45 XT High Performance Thermal Storefront System

YES 45 XT High Performance Thermal Storefront System Dual Thermal Barrier ThermaBond Plus Pour & Debridge Technology Installation Manual 2015 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes... Page

More information

DIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum.

DIVISION 8 DOORS AND WINDOWS. 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 8.01 DOORS AND FRAMES (12-2-02) A. Doors DIVISION 8 DOORS AND WINDOWS 1. Exterior and interior single doors shall be 1-3/4 inch thick, 3 feet wide, and 7 feet high, minimum. 2. Where required for maintenance

More information

Definitions and Design Considerations... W-CR-2

Definitions and Design Considerations... W-CR-2 General Information SECTION DIRECTORY Definitions and Design Considerations... W-CR-2 Combination Assembly Recommendations and Limitations Typical Sealant... W-CR-4 Single-Unit Opening... W-CR-4 Two-Way

More information

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt

More information

14000 Series. Fabrication and Installation Instructions

14000 Series. Fabrication and Installation Instructions 14000 Series Fabrication and Installation Instructions Revision May 2013 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...5 ACCESSORIES...8 OVERVIEW...10 FRAME FABRICATION...15

More information

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection

Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5

More information

4000 Series MS Deadlock Strikes

4000 Series MS Deadlock Strikes ACCESSORIES 4000 SERIES MS DEADLOCK S A-1 4000 Series MS Deadlock Strikes ALUMINUM 4000 Series MS Deadlock Strikes add aesthetics and finish to strike cutouts in jambs. HOLLOW METAL The majority of Adams

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

DIVISION Hardware

DIVISION Hardware FORMAT 1. Technical specifications content and numbering system shall be based on the most current CSI Master Format. BASIS OF DESIGN 1. APSU design standards shall not replace fully developed, project

More information

YSD 400 Sliding Door System Installation Manual

YSD 400 Sliding Door System Installation Manual System Installation Manual 2006 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS DESCRIPTION

More information

2100 series exit devices. rugged reliability

2100 series exit devices. rugged reliability rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality

More information

Electrical Power Transfer Products

Electrical Power Transfer Products Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge

More information

8000 SERIES SERIES HEAVY-DUTY MODELS

8000 SERIES SERIES HEAVY-DUTY MODELS GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS MARCH, 2009 PART NUMBER 590-500 1 INSTALLATION INSTRUCTIONS 2 INDEX MARCH, 2009 INSTALLATION INSTRUCTIONS CONTENTS These instructions show the general installation sequence and procedure for typical installation.

More information

Aluminum Continuous Geared Hinges

Aluminum Continuous Geared Hinges Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge

More information

Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING

Encore 20 Min. FIRE RATED DOORS WARNOCK HERSEY ENCORE - STANDARD PANEL - 20 MIN. RATING Encore 20 Min 20 Minute (Positive Pressure) - Category B Manufacturing Specifications MAXIMUM SIZES All doors shall have a minimum thickness of 1-3/4" + 1/16" Single Swing: 4/0 x 8/0 Standard Pair: 8/0

More information

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door

More information

LIST PRICING. Standard Door Modifications

LIST PRICING. Standard Door Modifications Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation

More information

Kestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet

More information

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions 14000 I/O Series Flush Glaze Fabrication and Installation Instructions Last saved on 12/18/2009 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...4 ACCESSORIES...5 OVERVIEW...6

More information

Product Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions

Product Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions Product Guide An Introduction to Hollow Metal Terminology and CURRIES Product in door opening solutions CURRIES CURRIES Company of Mason City, Iowa is pleased to introduce you to Basic Hollow Metal Terminology.

More information

Storefront Installation Guide

Storefront Installation Guide Storefront General Notes: 1. Check Contract Documents and Shop Drawings. Understand and clarify any Field Verify Notes and approvals of drawings and products to be familiar with the project. Installation

More information

Table Of Contents. Warranty Terms and Conditions

Table Of Contents. Warranty Terms and Conditions Table Of Contents Warranty... Exit Devices - Mechanical and Electrified Concealed Vertical Rod (CVR) - 28 Series...2 Rim Exit Devices - 29 Series...2 Electrified Concealed Vertical Rod (CVR) and Rim Devices...3

More information

14000 Series. Fabrication and Installation Instructions

14000 Series. Fabrication and Installation Instructions 14000 Series Fabrication and Installation Instructions 14000 Series Revision December 01, 2009 Table of Contents GENERAL CONSTRUCTION NOTES... 3 EXTRUDED ALUMINUM PARTS... 4 ACCESSORIES... 7 OVERVIEW...

More information

THRESHOLDS. Finishing Touch for Floor Closer Installations

THRESHOLDS. Finishing Touch for Floor Closer Installations THRESHOLDS Finishing Touch for Floor Closer Installations Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole

More information

INSTALLATION INSTRUCTIONS TRIFAB 451UT SCREW SPLINE ASSEMBLY TRIFAB 451UT. AUGUST, 2010 (Part No. 452T-CG-970) EC

INSTALLATION INSTRUCTIONS TRIFAB 451UT SCREW SPLINE ASSEMBLY TRIFAB 451UT. AUGUST, 2010 (Part No. 452T-CG-970) EC AUGUST, 2010 (Part No. 452T-CG-970) EC 97904-31 1 INSTALLATION SCREW SPLINE ASSEMBLY Kawneer Company, Inc., 2010 INSTRUCTIONS 2 TABLE OF CONTENTS (452T-CG-970) AUGUST, 2010 These instructions show the

More information

20 Series Exit Devices Accessories Mullions & Door Kits

20 Series Exit Devices Accessories Mullions & Door Kits 20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"

More information

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts 1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder

More information

Table Of Contents. Warranty Terms and Conditions

Table Of Contents. Warranty Terms and Conditions Table Of Contents Warranty... Exit Devices - Mechanical and Electrified Concealed Vertical Rod (CVR) - 28 Series...2 Rim Exit Devices - 29 Series...2 Electrified Concealed Vertical Rod (CVR) and Rim Devices...3

More information

Universal ARCOS EA. Patch Fittings

Universal ARCOS EA. Patch Fittings Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings

More information

CLEAR GLASS WALL SYSTEMS

CLEAR GLASS WALL SYSTEMS PRODUCT DATA SHEET SERIES SI3000C CLEAR GLASS WALL SYSTEMS Clean, Uninterrupted Views Series SI3000C Clear Glass Walls eliminate vertical stiles, allowing for maximum transparency, natural daylighting,

More information

INSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN

INSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE

More information