HA MHz Video Buffer. Features. Applications. Ordering Information. Pinouts. Data Sheet February 6, 2006 FN2924.8
|
|
- Lorraine Chandler
- 5 years ago
- Views:
Transcription
1 HA-533 Data Sheet February 6, 26 FN MHz Video Buffer The HA-533 is a unity gain monolithic IC designed for any application requiring a fast, wideband buffer. Featuring a bandwidth of 25MHz and outstanding differential phase/ gain characteristics, this high performance voltage follower is an excellent choice for video circuit design. Other features, which include a minimum slew rate of /µs and high output drive capability, make the HA-533 applicable for line driver and high speed data conversion circuits. The high performance of this product is a result of the Intersil Dielectric Isolation process. A major feature of this process is that it produces both PNP and NPN high frequency transistors which makes wide bandwidth designs, such as the HA-533, practical. Alternative process methods typically produce a lower AC performance. Ordering Information PART NUMBER Pinouts PART MARKING TEMP. RANGE ( C) HA-533 (PDIP) TOP VIEW PACKAGE PKG. DWG. # HA HA to 25 2 Pin Metal Can T2.C HA HA to 75 8 Ld PDIP E8.3 Features Differential Phase Error Degrees Differential Gain Error % High Slew Rate /µs Wide Bandwidth (Small Signal) MHz Wide Power Bandwidth DC to 7.5MHz Fast Rise Time ns High Output Drive ± With Ω Load Wide Power Supply Range ±5V to ±6V Replace Costly Hybrids Applications Video Buffer High Frequency Buffer Isolation Buffer High Speed Line Driver Impedance Matching Current Boosters High Speed A/D Input Buffers Related Literature - AN548, Designer s Guide for HA-533 V+ 8 OUT SUB- STRATE IN 4 5 V- HA-533 (METAL CAN) TOP VIEW V+ CASE 2 2 OUT V IN CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures INTERSIL or Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 23, 25, 26. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
2 Absolute Maximum Ratings Voltage Between V+ and V- Pins DC Input Voltage V+ to V- Output Current (Peak) (5ms On/ Second Off) ±2mA ESD Rating Human Body Model (Per MIL-STD-883 Method 35.7) Operating Conditions Temperature Ranges (Note 3) HA C to 25 C HA C to 75 C Thermal Information Thermal Resistance (Typical, Note 2) θ JA ( C/W) θ JC ( C/W) Metal Can Package PDIP Package N/A Maximum Junction Temperature (Note ) C Maximum Junction Temperature (Plastic Packages) C Maximum Storage Temperature Range C to 5 C Maximum Lead Temperature (Soldering s) C CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES:. Maximum power dissipation, including load conditions, must be designed to maintain the maximum junction temperature below 75 C for the metal can package, and below 5 C for the plastic packages (See Figure 5.). 2. θ JA is measured with the component mounted on an evaluation PC board in free air. 3. The maximum operating temperature may have to be derated depending on the output load condition. See Figure 5 for more information. Electrical Specifications V SUPPLY = ±2V, R S = 5Ω, R L = Ω, C L = pf, Unless Otherwise Specified PARAMETER TEST CONDITIONS TEMP. ( C) HA HA MIN TYP MAX MIN TYP MAX UNITS INPUT CHARACTERISTICS Offset Voltage mv Full mv Average Offset Voltage Drift Full µv/ C Bias Current µa Full µa Input Resistance MΩ Input Capacitance pf Input Noise Voltage Hz to MHz µv P-P TRANSFER CHARACTERISTICS Voltage Gain R L = Ω V/V R L = kω V/V R L = Ω Full V/V -3dB Bandwidth MHz OUTPUT CHARACTERISTICS Output Voltage Swing R L = Ω Full ±8 ± - ±8 ± - V R L = kω, V S = ±5V Full ± ±2 - ± ±2 - V Output Current 25 ±8 ± - ±8 ± - ma Output Resistance Ω Full Power Bandwidth V OUT = V RMS, R L = kω MHz Full Power Bandwidth (Note 4) MHz TRANSIENT RESPONSE Rise Time V OUT = 5mV ns Propagation Delay ns 2 FN2924.8
3 Electrical Specifications V SUPPLY = ±2V, R S = 5Ω, R L = Ω, C L = pf, Unless Otherwise Specified (Continued) PARAMETER TEST CONDITIONS TEMP. ( C) HA HA MIN TYP MAX MIN TYP MAX UNITS Overshoot % Slew Rate (Note 4) V/ns Settling Time to.% ns Differential Phase Error (Note 5) Degree Differential Gain Error (Note 5) % POWER SUPPLY CHARACTERISTICS Supply Current ma Full ma Power Supply Rejection Ratio Full db Harmonic Distortion = V RMS at khz 25 - <. - - <. - % NOTES: 4. V SUPPLY = ±5V, V OUT = ±, R L = kω. 5. Differential gain and phase error are nonlinear signal distortions found in video systems and are defined as follows: Differential gain error is defined as the change in amplitude at the color subcarrier frequency as the picture signal is varied from blanking to white level. Differential phase error is defined as the change in the phase of the color subcarrier as the picture signal is varied from blanking to white level. R L = 3Ω. Test Circuits and Waveforms +5V.µF +2V.µF IN OUT IN OUT R L Ω.µF.µF -5V -2V FIGURE. SLEW RATE AND SETTLING TIME FIGURE 2. TRANSIENT RESPONSE 5mV INPUT 9% OUTPUT V % ERROR BAND SLEW ±mv FROM t RATE = FINAL VALUE V/ t SETTLING TIME INPUT 9% OUTPUT % OVERSHOOT NOTE: Measured on both positive and negative transitions. FIGURE 3. SETTLING TIME AND SLEW RATE FIGURE 4. RISE TIME AND OVERSHOOT 3 FN2924.8
4 Test Circuits and Waveforms (Continued) V OUT V OUT T A = 25 C, R S = 5Ω, R L = Ω T A = 25 C, R S = 5Ω, R L = kω + RESPONSE + RESPONSE 5mV 5mV V OUT T A = 25 C, R S = 5Ω, R L = Ω PULSE RESPONSE Schematic Diagram V+ R 5 R 4 R 2 R 2 Q 5 Q Q 6 Q Q 6 Q 2 Q R 9 Q 9 Q 7 R R 6 Q 3 R 8 Q 4 Q 8 V OUT R Q 7 Q 3 Q 5 Q 9 Q 2 Q 8 Q 4 R R 3 V- R 3 4 FN2924.8
5 Application Information Layout Considerations The wide bandwidth of the HA-533 necessitates that high frequency circuit layout procedures be followed. Failure to follow these guidelines can result in marginal performance. Probably the most crucial of the RF/video layout rules is the use of a ground plane. A ground plane provides isolation and minimizes distributed circuit capacitance and inductance which will degrade high frequency performance. IC sockets contribute inter-lead capacitance which limits device bandwidth and should be avoided. Pin 6 can be tied to either supply, grounded, or simply not used. But to optimize device performance and improve isolation, it is recommended that this pin be grounded. Other considerations are proper power supply bypassing and keeping the input and output connections as short as possible which minimizes distributed capacitance and reduces board space. Power Supply Decoupling For optimum device performance, it is recommended that the positive and negative power supplies be bypassed with capacitors to ground. Ceramic capacitors ranging in value from.µf to.µf will minimize high frequency variations in supply voltage. Solid tantalum capacitors µf or larger will optimize low frequency performance. It is also recommended that the bypass capacitors be connected close to the HA-533 (preferably directly to the supply pins). Figure 5 is based on: T P JMAX T A DMAX = θ JA Where: T JMAX = Maximum Junction Temperature of the Device T A = Ambient Temperature MAXIMUM TOTAL POWER DISSIPATION (W) θ JA = Junction to Ambient Thermal Resistance PDIP CAN QUIESCENT P D =.72W AT V S = ±2V, I CC = 3mA TEMPERATURE ( C) FIGURE 5. MAXIMUM POWER DISSIPATION vs TEMPERATURE Typical Applications (Also see Application Note AN548) R S +2V.µF 2 5.µF -2V R M 5Ω RG -58 5Ω R L VIDEO SIGNAL INPUT V+ HA-2539 R + 6Ω - R 2 5Ω V- 9Ω V+ VIDEO HA-533 OUTPUT 75Ω V- 75Ω Ω FIGURE 6. VIDEO COAXIAL LINE DRIVER 5Ω SYSTEM FIGURE 7. VIDEO GAIN BLOCK 5 FN2924.8
6 Typical Applications (Also see Application Note AN548) (Continued) V OUT V OUT T A = 25 C, R S = 5Ω, R M = R L = 5Ω T A = 25 C, R S = 5Ω, R M = R L = 5Ω R L V O = = R L + R M -- V 2 IN R L V O = = R L + R M -- V 2 IN POSITIVE PULSE RESPONSE NEGATIVE PULSE RESPONSE Typical Performance Curves 4 OFFSET VOLTAGE (mv) V S = ±2V V S = ±5V V S = ± INPUT BIAS CURRENT (µa) 3 2 V S = ±2V V S = ± V S = ±5V V S = ±5V V S = ±5V TEMPERATURE ( C) FIGURE 8. INPUT OFFSET VOLTAGE vs TEMPERATURE TEMPERATURE ( C) FIGURE 9. INPUT BIAS CURRENT vs TEMPERATURE 3 V S = ±5V 3 V S = ±5V, = ± SUPPLY CURRENT (ma) 2 V S = ±2V V S = ± V S = ±5V SLEW RATE (V/µs) 2 FALL (R L = kω) FALL (R L = Ω) RISE (R L = kω) RISE (R L = Ω) TEMPERATURE ( C) FIGURE. SUPPLY CURRENT vs TEMPERATURE TEMPERATURE ( C) FIGURE. SLEW RATE vs TEMPERATURE 6 FN2924.8
7 Typical Performance Curves (Continued) SLEW RATE (V/µs) V S = ±5V, R L = kω T A = 25 C, = ± RISE FALL SLEW RATE (V/µs) RISE FALL V S = ±5V, R L = Ω T A = 25 C, = ± CAPACITAE (pf) 5, CAPACITAE (pf) 5, FIGURE 2. SLEW RATE vs LOAD CAPACITAE FIGURE 3. SLEW RATE vs LOAD CAPACITAE 8 6 V S = ±5V, T A = 25 C R L = kω 9 7 V S = ±5V, T A = 25 C R L = 5Ω OUTPUT INPUT V OS (mv) R L = kω R L = kω OUTPUT INPUT V OS (mv) R L = Ω R L = Ω R L = kω INPUT VOLTAGE (V) R L = 5Ω INPUT VOLTAGE (V) FIGURE 4. GAIN ERROR vs INPUT VOLTAGE FIGURE 5. GAIN ERROR vs INPUT VOLTAGE 6 4 V S = ±5V, V O = ± 8 V S = ±5, T A = 25 C OUTPUT INPUT V OS (mv) R L = kω - V OUT (mv) V OUT = SINKING CURRENT V OUT = - V OUT = + V OUT = SOURCING CURRENT TEMPERATURE ( C) I OUT (ma) 2 FIGURE 6. GAIN ERROR vs TEMPERATURE FIGURE 7. - V OUT vs I OUT 7 FN2924.8
8 Typical Performance Curves (Continued) PHASE ANGLE (DEGREES) Y 22 Y 2 Y Y 2 MAGNITUDE (S) Y Y 2 Y 2, Y 22 Y Y 2 Y 22 Y FREQUEY (Hz) FREQUEY (Hz) 9 FIGURE 8. Y - PARAMETERS PHASE vs FREQUEY FIGURE 9. Y - PARAMETER MAGNITUDE vs FREQUEY POWER SUPPLY REJECTION RATIO (db) V S = ±2V, T A = 25 C TOTAL HARMONIC DISTORTION (%) V S = ±2V, R L = Ω = V RMS K K K M M FREQUEY (Hz) K K FREQUEY (Hz) K FIGURE 2. POWER SUPPLY REJECTION RATIO vs FREQUEY FIGURE 2. TOTAL HARMONIC DISTORTION vs FREQUEY TOTAL HARMONIC DISTORTION (%)... V S = ±2V R L = ±V Ω = ±2V, R L = Ω f = khz PEAK TO PEAK OUTPUT VOLTAGE (V) T A = 25 C V S = ±5V V S = ±5V V S = ±2V V S = ± 2 3 INPUT VOLTAGE (RMS) FIGURE 22. TOTAL HARMONIC DISTORTION vs INPUT VOLTAGE K LOAD RESISTAE (Ω) FIGURE 23. OUTPUT VOLTAGE SWING vs LOAD RESISTAE 8 FN2924.8
9 Typical Performance Curves (Continued) OUTPUT VOLTAGE (V RMS ) V S = ±5V, R L = Ω NO HEAT SINK IN 3. FREE AIR K K M M M G FREQUEY (Hz) OUTPUT VOLTAGE (V RMS ) V S = ±5V, R L = kω NO HEAT SINK 4. IN FREE AIR K K M M M G FREQUEY (Hz) FIGURE 24. OUTPUT SWING vs FREQUEY (NOTE) FIGURE 25. OUTPUT SWING vs FREQUEY (NOTE) NOTE: This curve was obtained by noting the output voltage necessary to produce an observable distortion for a given frequency. If higher distortion is acceptable, then a higher output voltage for a given frequency can be obtained. However, operating the HA-533 with increased distortion (to the right of curve shown), will also be accompanied by an increase in supply current. The resulting increase in chip temperature must be considered and heat sinking will be necessary to prevent thermal runaway. This characteristic is the result of the output transistor operation. If the signal amplitude or signal frequency or both are increased beyond the curve shown, the NPN, PNP output transistors will approach a condition of being simultaneously on. Under this condition, thermal runaway can occur. 9 FN2924.8
10 Die Characteristics SUBSTRATE POTENTIAL (POWERED UP): Unbiased TRANSISTOR COUNT: 2 PROCESS: Bipolar Dielectric Isolation Metallization Mask Layout HA-533 IN V+ OUT V- FN2924.8
11 Metal Can Packages (Can) ØD ØD A F L Øb REFEREE PLANE A A BASE METAL NOTES:. The reference, base, and seating planes are the same for this variation. 2. Measured from maximum diameter of the product. 3. N is the maximum number of terminal positions. 4. Dimensioning and tolerancing per ANSI Y4.5M Controlling dimension: IH. e SECTION A-A LEAD FINISH Øb2 2 N k e k T2.C 2 LEAD METAL CAN PACKAGE IHES MILLIMETERS SYMBOL MIN MAX MIN MAX NOTES A Øb Øb ØD ØD e.4 BSC.6 BSC - e. BSC 2.54 BSC - F k k L N Rev. 5/8/94 FN2924.8
12 Dual-In-Line Plastic Packages (PDIP) INDEX AREA BASE PLANE SEATING PLANE D B -C- -A- N 2 3 N/2 B D e D E -B- A. (.25) M C A A2 L B S NOTES:. Controlling Dimensions: IH. In case of conflict between English and Metric dimensions, the inch dimensions control. 2. Dimensioning and tolerancing per ANSI Y4.5M Symbols are defined in the MO Series Symbol List in Section 2.2 of Publication No Dimensions A, A and L are measured with the package seated in JEDEC seating plane gauge GS D, D, and E dimensions do not include mold flash or protrusions. Mold flash or protrusions shall not exceed. inch (.25mm). 6. E and e A are measured with the leads constrained to be perpendicular to datum -C-. 7. e B and e C are measured at the lead tips with the leads unconstrained. e C must be zero or greater. 8. B maximum dimensions do not include dambar protrusions. Dambar protrusions shall not exceed. inch (.25mm). 9. N is the maximum number of terminal positions.. Corner leads (, N, N/2 and N/2 + ) for E8.3, E6.3, E8.3, E28.3, E42.6 will have a B dimension of inch ( mm). A e C E C L e A C e B E8.3 (JEDEC MS--BA ISSUE D) 8 LEAD DUAL-IN-LINE PLASTIC PACKAGE IHES MILLIMETERS SYMBOL MIN MAX MIN MAX NOTES A A A B B , C D D E E e. BSC 2.54 BSC - e A.3 BSC 7.62 BSC 6 e B L N Rev. 2/93 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9 quality systems. Intersil Corporation s quality certifications can be viewed at Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see 2 FN2924.8
DATASHEET HA Features. Applications. Ordering Information. Pinouts. 250MHz Video Buffer. FN2924 Rev 8.00 Page 1 of 12.
25MHz Video Buffer NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at -888-INTERSIL or www.intersil.com/tsc DATASHEET FN2924 Rev 8. The HA-533 is a unity
More informationHA MHz Video Buffer. Description. Features. Applications. Ordering Information. Pinouts. April 1997
SEMICONDUCTOR HA-533 April 997 25MHz Video Buffer Features Differential Phase Error...............2 Degrees Differential Gain Error......................3% High Slew Rate......................... /µs Wide
More informationHA Features. 12MHz, High Input Impedance, Operational Amplifier. Applications. Pinout. Part Number Information. Data Sheet May 2003 FN2893.
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 HA-2515 Data Sheet May 23 FN2893.5 12MHz, High Input Impedance, Operational Amplifier HA-2515 is a high performance operational amplifier which sets
More informationDATASHEET HA Features. Applications. Pinout. Part Number Information. 12MHz, High Input Impedance, Operational Amplifier
12MHz, High Input Impedance, Operational Amplifier OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 DATASHEET FN289 Rev 6. HA-255 is an operational amplifier whose design is optimized to deliver excellent
More informationHA Features. Quad, 3.5MHz, Operational Amplifier. Applications. Pinout. Ordering Information. Data Sheet July 2004 FN2922.5
HA-4741 Data Sheet July 24 FN2922. Quad, 3.MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational
More informationHA-2640, HA Features. 4MHz, High Supply Voltage Operational Amplifiers. Applications. Ordering Information. Pinouts
HA-264, HA-2645 Data Sheet January 3, 26 FN294.5 4MHz, High Supply Voltage Operational Amplifiers HA-264 and HA-2645 are monolithic operational amplifiers which are designed to deliver unprecedented dynamic
More informationHA MHz, High Slew Rate, High Output Current Buffer. Description. Features. Applications. Ordering Information. Pinouts.
SEMICONDUCTOR HA-2 November 99 Features Voltage Gain...............................99 High Input Impedance.................... kω Low Output Impedance....................... Ω Very High Slew Rate....................
More informationHA Features. 400MHz, Fast Settling Operational Amplifier. Applications. Ordering Information. Pinout. Data Sheet August 2002 FN2897.
HA-5 Data Sheet August FN97. MHz, Fast Settling Operational Amplifier The Intersil HA-5 is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics.
More informationDATASHEET HA-2520, HA-2522, HA Features. Applications. Ordering Information
DATASHEET 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers FN2894 Rev 1. comprise a series of operational amplifiers delivering an unsurpassed combination of specifications
More informationDATASHEET HA Features. Applications. Pinout. Ordering Information. Quad, 3.5MHz, Operational Amplifier. FN2922 Rev 5.00 Page 1 of 8.
DATASHEET HA-4741 Quad, 3.5MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational amplifiers. Each
More informationDATASHEET HA Features. Applications. Ordering Information. 110MHz, High Slew Rate, High Output Current Buffer. FN2921 Rev 12.
DATASHEET HA-52 MHz, High Slew Rate, High Output Current Buffer The HA-52 is a monolithic, wideband, high slew rate, high output current, buffer amplifier. Utilizing the advantages of the Intersil D.I.
More informationHA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet November, 6 FN894.8 MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-, HA-, HA- comprise a series of operational amplifiers delivering an unsurpassed
More informationHA-2520, HA MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers. Features. Applications. Ordering Information
HA-22, HA-22 Data Sheet August, 2 FN2894. 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-22/22 comprise a series of operational amplifiers delivering an unsurpassed
More informationMARKING RANGE ( C) PACKAGE DWG. # HA-2600 (METAL CAN)
DATASHEET 2MHz, High Input Impedance Operational Amplifier is an internally compensated bipolar operational amplifier that features very high input impedance (5M coupled with wideband AC performance. The
More informationHA MHz, Fast Settling Operational Amplifier. Features. Applications. Pinout. Part Number Information. Data Sheet November 19, 2004 FN2914.
OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 888TERSIL or www.intersil.com/tsc HA595 Data Sheet November 9, 2 FN29.6 5MHz, Fast Settling Operational Amplifier The
More informationHA Features. 650ns Precision Sample and Hold Amplifier. Applications. Functional Diagram. Ordering Information. Pinout
HA-50 Data Sheet June 200 FN2858.5 650ns Precision Sample and Hold Amplifier The HA-50 is a very fast sample and hold amplifier designed primarily for use with high speed A/D converters. It utilizes the
More informationHA-2520, HA-2522, HA-2525
HA-, HA-, HA- Data Sheet September 99 File Number 9. MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-// comprise a series of operational amplifiers delivering an unsurpassed
More informationHA-2600, HA Features. 12MHz, High Input Impedance Operational Amplifiers. Applications. Pinouts. Ordering Information
HA26, HA26 September 998 File Number 292.3 2MHz, High Input Impedance Operational Amplifiers HA26/26 are internally compensated bipolar operational amplifiers that feature very high input impedance (MΩ,
More informationDATASHEET HA Features. Applications. Ordering Information. Pinout. 400MHz, Fast Settling Operational Amplifier. FN2897 Rev.5.
DATASHEET MHz, Fast Settling Operational Amplifier The Intersil is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics. Bipolar construction
More informationDATASHEET HA-5127/883. Features. Applications. Ordering Information. Pinout. Ultra Low Noise, Precision Operational Amplifier
Ultra Low Noise, Precision Operational Amplifier NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN3751
More informationDATASHEET CA Applications. Pinout. Ordering Information. General Purpose NPN Transistor Array. FN483 Rev.6.00 Page 1 of 7.
DATASHEET CA-386 General Purpose NPN Transistor Array The CA386 consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationFeatures. NOTE: Non-designated pins are no connects and are not electrically connected internally.
OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Data Sheet December 1995, Rev. G EL2001 FN7020 Low Power, 70MHz Buffer Amplifier
More informationHA MHz, PRAM Four Channel Programmable Amplifiers. Features. Applications. Pinout. Ordering Information
HA0 Data Sheet August 00 FN89. 0MHz, PRAM Four Channel Programmable Amplifiers The HA0 comprise a series of fourchannel programmable amplifiers providing a level of versatility unsurpassed by any other
More informationISL Features. Multi-Channel Buffers Plus V COM Driver. Ordering Information. Applications. Pinout FN Data Sheet December 7, 2005
Data Sheet FN6118.0 Multi-Channel Buffers Plus V COM Driver The integrates eighteen gamma buffers and a single V COM buffer for use in large panel LCD displays of 10 and greater. Half of the gamma channels
More informationEL5129, EL5329. Multi-Channel Buffers. Features. Applications. Ordering Information FN Data Sheet May 13, 2005
Data Sheet May 3, 25 FN743. Multi-Channel Buffers The EL529 and EL5329 integrate multiple gamma buffers and a single V COM buffer for use in large panel LCD displays of and greater. The EL529 integrates
More informationEL5027. Dual 2.5MHz Rail-to-Rail Input-Output Buffer. Features. Applications. Ordering Information. Pinout. Data Sheet May 4, 2007 FN7426.
EL57 Data Sheet FN746.1 Dual.5MHz Rail-to-Rail Input-Output Buffer The EL57 is a dual, low power, high voltage rail-to-rail input-output buffer. Operating on supplies ranging from 5V to 15V, while consuming
More informationCA3102. Dual High Frequency Differential Amplifier For Low Power Applications Up to 500MHz. Features. Applications. Ordering Information.
CA Data Sheet November 999 File Number 6.6 Dual High Frequency Differential Amplifier For Low Power Applications Up to MHz The CA consists of two independent differential amplifiers with associated constant
More informationHA-2602/883. Wideband, High Impedance Operational Amplifier. Description. Features. Applications. Part Number Information. Pinout.
October 2004 OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Wideband, High Impedance Operational Amplifier Features This Circuit
More informationCA124, CA224, CA324, LM324, LM2902
OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT CA, CA, CA, LM, LM9 Data Sheet May File Number 796.5 itle 9 b- ad, Hz, raal plis i- - -, usl, lis) tho y- ds er- Quad, MHz, Operational Amplifiers for Commercial,
More informationDATASHEET HFA1112. Features. Applications. Related Literature. Pin Descriptions. Ordering Information
DATASHEET HFA1112 85MHz, Low Distortion Programmable Gain Buffer Amplifiers FN2992 Rev 8. July 27, 25 The HFA1112 is a closed loop Buffer featuring user programmable gain and ultra high speed performance.
More informationHA, HA Absolute Maximum Ratings Supply Voltage Between V+ and V Terminals V Differential Input Voltage V
HA, HA Data Sheet October 6, FN9.9 Dual and Quad, 8MHz, Low Noise Operational Amplifiers Low noise and high performance are key words describing HA and HA. These general purpose amplifiers offer an array
More informationDATASHEET HA-5137A. Features. Applications. Ordering Information. Pinout. 63MHz, Ultra-Low Noise Precision Operational Amplifier
DATASHEET HA-5137A 3MHz, Ultra-Low Noise Precision Operational Amplifier The HA-5137 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics.
More informationCA3096, CA3096A, CA3096C
January OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HFA39 CA39, CA39A, CA39C NPN/PNP Transistor Arrays Applications Five-Independent Transistors - Three NPN and - Two PNP Differential Amplifiers DC Amplifiers
More informationDATASHEET EL2072. Features. Applications. Pinout. Ordering Information. 730MHz Closed Loop Buffer
730MHz Closed Loop Buffer OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7033 Rev 0.00 The EL2072 is a wide bandwidth,
More informationHI-200, HI-201. Dual/Quad SPST, CMOS Analog Switches. Features. Applications. Ordering Information. Functional Diagram FN3121.8
HI-200, HI-201 Data Sheet FN3121.8 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds
More informationPOSSIBLE SUBSTITUTE PRODUCT HA-2842, HA-2544
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA2842, HA2544 5MHz, Fast Settling, Unity Gain Stable, Video Operational Amplifier DATASHEET FN2843 Rev 4. The HA2841 is a wideband, unity gain stable, operational
More informationHigh Speed BUFFER AMPLIFIER
High Speed BUFFER AMPLIFIER FEATURES WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs HIGH OUTPUT CURRENT: 1mA LOW OFFSET VOLTAGE: 1.mV REPLACES HA-33 IMPROVED PERFORMANCE/PRICE: LH33, LTC11, HS APPLICATIONS OP
More informationDATASHEET ICL8069. Features. Pinouts. Ordering Information. Low Voltage Reference. FN3172 Rev.3.00 Page 1 of 6. Jan FN3172 Rev.3.00.
DATASHEET Low Voltage Reference The is a 1.2V temperature-compensated voltage reference. It uses the band-gap principle to achieve excellent stability and low noise at reverse currents down to 50 A. Applications
More informationHA5023. Dual 125MHz Video Current Feedback Amplifier. Features. Applications. Ordering Information. Pinout. Data Sheet September 30, 2015 FN3393.
HA523 Data Sheet September 3, 215 FN3393.9 Dual 125MHz Video Current Feedback Amplifier The HA523 is a wide bandwidth high slew rate dual amplifier optimized for video applications and gains between 1
More informationHA4600. Features. 480MHz, SOT-23, Video Buffer with Output Disable. Applications. Pinouts. Ordering Information. Truth Table
TM Data Sheet June 2000 File Number 3990.6 480MHz, SOT-23, Video Buffer with Output Disable The is a very wide bandwidth, unity gain buffer ideal for professional video switching, HDTV, computer monitor
More informationHIP V, 300mA Three Phase High Side Driver. Features. Applications. Ordering Information. Pinout. July 2004
HIP0 Data Sheet July 00 FN. 0V, 00mA Three Phase High Side Driver The HIP0 is a three phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP0 may be used together
More informationTEMP. PKG. -IN 1 16 S/H CONTROL PART NUMBER RANGE
DATASHEET 7ns, Low Distortion, Precision Sample and Hold Amplifier FN59 Rev 5. The combines the advantages of two sample/ hold architectures to create a new generation of monolithic sample/hold. High amplitude,
More informationHI-201HS. Features. High Speed, Quad SPST, CMOS Analog Switch. Applications. Ordering Information. Pinout (Switches Shown For Logic 1 Input) FN3123.
HI-HS Data Sheet September 4 FN.4 High Speed, Quad SPST, CMOS Analog Switch The HI-HS is a monolithic CMOS Analog Switch featuring very fast switching speeds and low ON resistance. The integrated circuit
More informationDATASHEET. Features. Applications. Pin Configuration HA-5147 (CERDIP) TOP VIEW. Ordering Information HA-5147
DATASHEET HA-517 12MHz, Ultra-Low Noise Precision Operational Amplifiers FN291 Rev 1. The HA-517 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics.
More informationDATASHEET CA3096, CA3096A, CA3096C. Description. Applications. CA3096, CA3096A, CA3096C Essential Differences. Part Number Information.
DATASHEET CA39, CA39A, CA39C NPN/PNP Transistor Arrays Applications Five-Independent Transistors - Three NPN and - Two PNP Differential Amplifiers DC Amplifiers Sense Amplifiers Level Shifters Timers Lamp
More informationHA Microsecond Precision Sample and Hold Amplifier. Features. Applications. Pinouts. Ordering Information. Data Sheet August 24, 2005 FN2857.
Data Sheet FN85. Microsecond Precision Sample and Hold Amplifier The was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier
More informationHA Quad, 3.5MHz, Operational Amplifier. Description. Features. Applications. Ordering Information. Pinouts. November 1996
SEMICONDUCTOR HA4741 November 1996 Features Slew Rate...............................1.6V/µs Bandwidth................................MHz Input Voltage Noise...................... 9nV/ Hz Input Offset Voltage.........................mV
More informationDATASHEET HA-5104/883. Description. Features. Applications. Ordering Information. Pinout. Low Noise, High Performance, Quad Operational Amplifier
DATASHEET Low Noise, High Performance, Quad Operational Amplifier FN3710 Rev 1.00 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph
More informationCA3140, CA3140A. 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output. Description. Features. Applications. Ordering Information
November 99 SEMICONDUCTOR CA, CAA.MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output Features MOSFET Input Stage - Very High Input Impedance (Z IN ) -.TΩ (Typ) - Very Low Input Current (I
More informationFeatures TEMP. RANGE ( C)
DATASHEET HFA0, HFA09, HFA27, HFA28 Ultra High Frequency Transistor Arrays The HFA0, HFA09, HFA27 and the HFA28 are Ultra High Frequency Transistor Arrays that are fabricated from Intersil Corporation
More informationAD9300 SPECIFICATIONS ELECTRICAL CHARACTERISTICS ( V S = 12 V 5%; C L = 10 pf; R L = 2 k, unless otherwise noted) COMMERCIAL 0 C to +70 C Test AD9300K
a FEATURES 34 MHz Full Power Bandwidth 0.1 db Gain Flatness to 8 MHz 72 db Crosstalk Rejection @ 10 MHz 0.03 /0.01% Differential Phase/Gain Cascadable for Switch Matrices MIL-STD-883 Compliant Versions
More informationData Sheet June Features. Pinout
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 888INTERSIL or www.intersil.com/tsc 0Bit Multiplying D/A Converter The AD7533 is a monolithic, low cost,
More informationDATASHEET ISL6208. Features. Applications. Related Literature. Ordering Information. Pinout. High Voltage Synchronous Rectified Buck MOSFET Driver
NOT RECOMMENDED FOR NEW DESIGNS POSSIBLE SUBSTITUTE PRODUCT ISL6208 High Voltage Synchronous Rectified Buck MOSFET Driver DATASHEET FN9047 Rev 0.00 The ISL6205 is a high-voltage, high-frequency, dual MOSFET
More informationCA5260, CA5260A. 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output. Features. Description.
, A November 1996 3MHz, BiMOS Microprocessor Operational Amplifiers with MOSFET Input/CMOS Output Features Description MOSFET Input Stage provides - Very High Z I = 1.5TΩ (1.5 x 10 12 Ω) (Typ) - Very Low
More informationAD7520, AD Bit, 12-Bit, Multiplying D/A Converters. Features. Ordering Information. Pinouts. Data Sheet August 2002 FN3104.
AD720, AD72 Data Sheet August 2002 FN304.4 0Bit, 2Bit, Multiplying D/A Converters The AD720 and AD72 are monolithic, high accuracy, low cost 0bit and 2bit resolution, multiplying digitaltoanalog converters
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationWideband, High Output Current, Fast Settling Op Amp AD842
a FEATURES AC PERFORMAE Gain Bandwidth Product: 8 MHz (Gain = 2) Fast Settling: ns to.1% for a V Step Slew Rate: 375 V/ s Stable at Gains of 2 or Greater Full Power Bandwidth: 6. MHz for V p-p DC PERFORMAE
More informationCA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458
OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT CA, CAC, CA, CA, LM, LMC, LM Data Sheet May File Number. tle M le l, h s raal pli li.9mhz Single and Dual, High Gain Operational Amplifiers for Military, Industrial
More informationPOSSIBLE SUBSTITUTE PRODUCT HA-2525, HA-2842
HA511 1MHz, Low Noise, Operational Amplifiers OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA2525, HA282 DATASHEET FN295 Rev 5. May 2 The HA511 is a dielectrically isolated operational amplifier featuring
More informationImproved Second Source to the EL2020 ADEL2020
Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling
More informationDATASHEET HI-201HS. Features. Applications. Ordering Information. Pinout (Switches Shown For Logic 1 Input) High Speed, Quad SPST, CMOS Analog Switch
DATASHEET HI-21HS High Speed, Quad SPST, CMOS Analog Switch The HI-21HS is a monolithic CMOS Analog Switch featuring very fast switching speeds and low ON resistance. The integrated circuit consists of
More informationSP720. Electronic Protection Array for ESD and Over-Voltage Protection. Features. [ /Title (SP720 ) /Subject. (Electronic.
SP70 Data Sheet January 99 File Number 79.0 [ /Title (SP70 ) /Subject (Electronic Protection Array for ESD and Over Voltage Protection) /Autho r () /Keywords (TVS, Transient Suppression, Protection, ESD,
More informationHigh Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
More informationDATASHEET CA3127. Features. Applications. Ordering Information. Pinout. High Frequency NPN Transistor Array. FN662 Rev.5.00 Page 1 of 9.
DATASHEET CA1 High Frequency NPN Transistor Array The CA1 consists of five general purpose silicon NPN transistors on a common monolithic substrate. Each of the completely isolated transistors exhibits
More informationDATASHEET HA-4741/883. Features. Description. Applications. Ordering Information. Pinouts. Quad Operational Amplifier. FN3704 Rev 0.
DATASHEET HA4741/883 Quad Operational Amplifier Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Slew Rate...........................0.9V/
More informationDATASHEET CD22M3494. Features. Applications. Block Diagram. 16 x 8 x 1 BiMOS-E Crosspoint Switch. FN2793 Rev 8.00 Page 1 of 10.
DATASHEET CD22M3494 16 x 8 x 1 BiMOS-E Crosspoint Switch The Intersil CD22M3494 is an array of 128 analog switches capable of handling signals from DC to video. Because of the switch structure, input signals
More informationNOT RECOMMENDED FOR NEW DESIGNS
NOT RECOMMENDED FOR NEW DESIGNS POSSIBLE SUBSTITUTE PRODUCTS (ISL6614, ISL6614A, and ISL6614B) Dual Channel Synchronous-Rectified Buck MOSFET Driver DATASHEET FN4838 Rev.1. The HIP662 is a high frequency,
More information250mA HIGH-SPEED BUFFER
ma HIGH-SPEED BUFFER FEATURES HIGH OUTPUT CURRENT: ma SLEW RATE: V/µs PIN-SELECTED BANDWIDTH: MHz to MHz LOW QUIESCENT CURRENT:.mA (MHz ) WIDE SUPPLY RANGE: ±. to ±V INTERNAL CURRENT LIMIT THERMAL SHUTDOWN
More informationDATASHEET HA4314B. Features. Ordering Information. Applications. Truth Table. 400MHz, 4x1 Video Crosspoint Switch. FN3679 Rev 12.
DATASHEET B 4MHz, 4x1 Video Crosspoint Switch FN3679 Rev 12. The B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high
More informationDATASHEET HI-200, HI-201. Features. Applications. Ordering Information. Functional Diagram. Dual/Quad SPST, CMOS Analog Switches
DATASHEET HI-200, HI-201 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200
More informationHigh Speed, Low Power Dual Op Amp AD827
a FEATURES HIGH SPEED 50 MHz Unity Gain Stable Operation 300 V/ s Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads EXCELLENT VIDEO PERFORMANCE 0.04% Differential Gain @ 4.4 MHz 0.19 Differential
More informationUltralow Offset Voltage Dual Op Amp AD708
Ultralow Offset Voltage Dual Op Amp FEATURES Very high dc precision 30 μv maximum offset voltage 0.3 μv/ C maximum offset voltage drift 0.35 μv p-p maximum voltage noise (0. Hz to 0 Hz) 5 million V/V minimum
More informationDATASHEET HI-524. Features. Applications. Functional Diagram. Ordering Information. Pinout. 4-Channel Wideband and Video Multiplexer
DATASHEET HI-524 4-Channel Wideband and Video Multiplexer The HI-524 is a 4-Channel CMOS analog multiplexer designed to process single-ended signals with bandwidths up to 10MHz. The chip includes a 1 of
More informationFeatures. High 50MHz Current Feedback Amplifier. Applications. Pinout. Ordering information. αrd2020a/c5d, αrd2020a/a5d
Data Sheet December 16, 2011 RDm015D High 50MHz Current Feedback Amplifier The αrd2020 is a fast settling, wide bandwidth amplifier optimized for gains between 10 and +10. Built using the JSC "RD Alfa
More informationCA3096, CA3096A, CA3096C
December 99 Applications Five-Independent Transistors - Three NPN and - Two PNP Differential Amplifiers DC Amplifiers Sense Amplifiers Level Shifters Timers Lamp and Relay Drivers Thyristor Firing Circuits
More informationLow Cost, General Purpose High Speed JFET Amplifier AD825
a FEATURES High Speed 41 MHz, 3 db Bandwidth 125 V/ s Slew Rate 8 ns Settling Time Input Bias Current of 2 pa and Noise Current of 1 fa/ Hz Input Voltage Noise of 12 nv/ Hz Fully Specified Power Supplies:
More informationSP723 Lead-Free/Green
TVS Diode Arrays The SP73 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection of sensitive input circuits. The SP73 has protection SCR/Diode device structures per input. There
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. 8MHz Rail-to-Rail Composite Video Driver. FN6104 Rev 5.
DATASHEET ISL59110 8MHz Rail-to-Rail Composite Video Driver The ISL59110 is a single rail-to-rail 3-pole output reconstruction filter with a -3dB roll-off frequency of 8MHz and a slew rate of 40V/µs, with
More informationDATASHEET EL5462. Features. Pinout. Applications. Ordering Information. 500MHz Low Power Current Feedback Amplifier. FN7492 Rev 0.
DATASHEET EL5462 5MHz Low Power Current Feedback Amplifier The EL5462 is a current feedback amplifier with a bandwidth of 5MHz which makes this amplifier ideal for today s high speed video and monitor
More informationEL2142. Features. Differential Line Receiver. Applications. Ordering Information. Pinout. Data Sheet February 11, 2005 FN7049.1
Data Sheet FN7049.1 Differential Line Receiver The is a very high bandwidth amplifier designed to extract the difference signal from noisy environments, and is thus primarily targeted for applications
More informationDual, Low Power Video Op Amp AD828
a FEATURES Excellent Video Performance Differential Gain and Phase Error of.% and. High Speed MHz db Bandwidth (G = +) V/ s Slew Rate ns Settling Time to.% Low Power ma Max Power Supply Current High Output
More informationHI Bit, 40 MSPS, High Speed D/A Converter
October 6, 005 Pb-Free and RoHS Compliant HI7 -Bit, 40 MSPS, High Speed D/A Converter Features Throughput Rate......................... 40MHz Resolution................................ -Bit Integral Linearity
More informationDATASHEET EL7104. Features. Ordering Information. Applications. Pinout. High Speed, Single Channel, Power MOSFET Driver. FN7113 Rev 2.
DATASHEET EL7104 High Speed, Single Channel, Power MOSFET Driver FN7113 Rev 2.00 The EL7104 is a matched driver IC that improves the operation of the industry-standard TC-4420/29 clock drivers. The Elantec
More informationCA3012. FM IF Wideband Amplifier. Description. Features. Applications. Ordering Information. Schematic Diagram. Pinout.
SEMICONDUCTOR CA30 November 99 FM IF Wideband Amplifier Features Exceptionally High Amplifier Gain - Power Gain at.mhz.....................7db Excellent Input Limiting Characteristics - Limiting Voltage
More informationDATASHEET HA Features. Applications. Pinout. Ordering Information. 3.2µs Sample and Hold Amplifiers. FN2856 Rev.7.
3.2µs Sample and Hold Amplifiers NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888TERSIL or www.intersil.com/tsc DATASHEET FN2856 Rev.7.00 The HA-2420
More informationOBSOLETE. Parameter AD9621 AD9622 AD9623 AD9624 Units
a FEATURES MHz Small Signal Bandwidth MHz Large Signal BW ( V p-p) High Slew Rate: V/ s Low Distortion: db @ MHz Fast Settling: ns to.%. nv/ Hz Spectral Noise Density V Supply Operation Wideband Voltage
More informationDATASHEET HC5503T. Features. Applications. Ordering Information. Block Diagram. Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit
NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART HC5503PRC Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit DATASHEET FN4506 Rev 2.00 The Intersil HC5503T is a low cost Subscriber
More informationDual, Current Feedback Low Power Op Amp AD812
a FEATURES Two Video Amplifiers in One -Lead SOIC Package Optimized for Driving Cables in Video Systems Excellent Video Specifications (R L = ): Gain Flatness. db to MHz.% Differential Gain Error. Differential
More informationDATASHEET HA-5102, HA Pinouts. Ordering Information. Features. Applications. Dual and Quad, 8MHz, Low Noise Operational Amplifiers
DATASHEET HA-512, HA-514 Dual and Quad, 8Hz, Low Noise Operational Amplifiers FN2925 Rev 9. October 26, 24 Low noise and high performance are key words describing HA-512 and HA-514. These general purpose
More informationDATASHEET EL2125. Features. Applications. Ordering Information. Pinouts. Ultra-Low Noise, Low Power, Wideband Amplifier. FN7045 Rev 3.
DATASHEET EL Ultra-Low Noise, Low Power, Wideband Amplifier The EL is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts. It is intended for use in systems
More informationHA Features. 100MHz Current Feedback Video Amplifier With Disable. Applications. Pinout. Data Sheet May 21, 2013 FN
HA- Data Sheet May, FN8. MHz Current Feedback Video Amplifier With Disable The HA- is a wide bandwidth, high slew rate amplifier optimized for video applications and gains between and. Manufactured on
More informationDATASHEET HI-1818A. Features. Applications. Ordering Information. Pinout. Low Resistance, Single 8-Channel, CMOS Analog Multiplexer
NOT RECOMMDED FOR NEW DESIGNS NO RECOMMDED REPLACEMT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Low Resistance, Single 8-Channel, CMOS Analog Multiplexer DATASHEET FN3141
More informationHigh-Speed, Low-Power Dual Operational Amplifier AD826
a FEATURES High Speed: MHz Unity Gain Bandwidth 3 V/ s Slew Rate 7 ns Settling Time to.% Low Power: 7. ma Max Power Supply Current Per Amp Easy to Use: Drives Unlimited Capacitive Loads ma Min Output Current
More informationCA3046. General Purpose NPN Transistor Array. Features. Applications. Ordering Information. Pinout. Data Sheet May 2001 File Number 341.
CA Data Sheet May File Number. General Purpose NPN Transistor Array The CA consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally
More informationOBSOLETE PRODUCT RECOMMENDED REPLACEMENT PART
CA-46 General Purpose NPN Transistor Array OBSOLETE PRODUCT RECOMMENDED REPLACEMENT PART HFA46 DATASHEET FN4 Rev 6. December, The CA46 consists of five general purpose silicon NPN transistors on a common
More informationData Sheet May 10, Features. Pinout
EL576 Data Sheet May, 7 FN7. 5MHz Differential Twisted-Pair Driver The EL576 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving
More informationEL2244, EL2444. Features. Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp. Applications. Pinouts FN Data Sheet July 14, 2004
EL2244, EL2444 Data Sheet July 14, 2004 FN7059.1 Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp The EL2244 and EL2444 are dual and quad versions of the popular EL2044. They are high speed, low power,
More informationVery Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of
More information250 MHz, General Purpose Voltage Feedback Op Amps AD8047/AD8048
5 MHz, General Purpose Voltage Feedback Op Amps AD8/AD88 FEATURES Wide Bandwidth AD8, G = + AD88, G = + Small Signal 5 MHz 6 MHz Large Signal ( V p-p) MHz 6 MHz 5.8 ma Typical Supply Current Low Distortion,
More informationDATASHEET HA-5101/883. Features. Applications. Ordering Information. Pinouts. Low Noise, High Performance Operational Amplifier
DATASHEET HA-511/883 Low Noise, High Performance Operational Amplifier The HA-511/883 is a dielectrically isolated operational amplifier featuring low noise and high performance. This amplifier has an
More information