Reflections: Jewel Tones Quilt featuring the Reflections Collection from EBI Fabric Corp.

Size: px

Start display at page:

Download "Reflections: Jewel Tones Quilt featuring the Reflections Collection from EBI Fabric Corp."

Colin Lane
5 years ago
Views:

1 Reflections: Jewel Tones Quilt featuring the Reflections Collection from EBI Fabric Corp. Size: 54" x 54" Skill Level: Intermediate Design by Sasha K Studio

2 Fabric Requirements & Cutting Instructions (A) (B) (C) (D) (E) (F) (G) Please Note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted. Very important: DO NOT cut strips for Step 9 and beyond until directed!!!! Fabric Yardage Cutting 1201 Reflections 17 Multi 1205 Princess 40 Jade 1203 Pirouette 31 Gold 1204 Diamond Block 61 Dark Fuchsia 1204 Diamond Block 31 Gold 1202 Fragments 17 Multi * Refer to quilt photo when cutting strips. Strips for each step should be cut from identical sections of fabric Pirouette 66 Fuchsia ¾ yard See cutting information on page 2 to fussy cut one 20 square. ⅜ yard (Step 5) Cut two 2 x 42 strips. Sub-cut the strips into two 2 x 23 strips. (Step 5) Cut two 2 x 42 strips. Sub-cut the strips into two 2 x 26 strips. ¼ yard (Step 2) Cut one 2 x 42 strip. Sub-cut the strip into two 2 x 16 strips. (Step 2) Cut one 2 x 42 strip. Sub-cut the strip into two 2 x 19 strips. ⅝ yard (Step 15) Cut six 2 ½ x 42 strips. Sew the strips together and cut four 2 ½ x 57 strips. ⅜ yard (Step 9) Cut two 2 x 42 strips. Sub-cut the strips into two 2 x 27¼ strips. 2 ¾ yards (Step 9) Cut two 2 x 42 strips. Sub-cut the strips into two 2 x 30¼ strips. Note: Cut all strips from length of fabric. (Step 4): From teal/purple zigzag area: Fussy cut two 2 ½ x 19 strips Fussy cut two 2 ½ x 23 strips (Step 10): From teal/purple zigzag area: Fussy cut two 2 ½ x 30¼ strips from LOF. Fussy cut two 2 ½ x 34¼ strips from LOF. (Step 15): Centered on the main stripe, Fussy cut four 7 ½ x 57 strips. ½ yard (Step 11) Cut one 4 ½ x 42 strip. Sub-cut the strip into four 4 ½ squares. (Step 14) Cut two 1 ½ x 42 strips. Sub-cut the strips into two 1 ½ x 34¼ strips. (Step 14) Cut two 1 ½ x 42 strips. Sub-cut the strips into two 1 ½ x 36¼ strips. (H) Black 1 yard (Step 1) Cut two 1½ x 42 strips. Sub-cut the strips into two 1½ x 14 strips and two 1½ x 16 strips. (Steps 3 & 7) Cut four 1 x 42 strips for piping. (Step 13) Cut one 3 x 42 strip. Sub-cut the strip into four 3 squares. (Step 20) Cut six 2 ½ x 42 for the binding. Backing (Your Choice) 3 ⅝ yards Cut two 62 x width of fabric strips. Piece the strips together to make the 62 x 62 back. You will also need: 62 x 62 Batting, threads to match, scissors, straight pins, acrylic ruler, rotary cutter and mat 2013 Sasha K. Studio for EBI Fabrics, Inc. Reflections: Jewel Tone Quilt 1

Fabric A Cutting Diagram 10 Center and fussy cut a 20 square from Fabric A according to Fig. 1. Mark the center point on each side of the square, align your ruler on the marks and cut four triangles from the corners.

10 Center the 20 square on a vertical gold ribbon. The remaining square should measure 14 x 14. Fig. 1 20 Block Assembly Instructions 1.

3 Fabric A Cutting Diagram 10 Center and fussy cut a 20 square from Fabric A according to Fig. 1. Mark the center point on each side of the square, align your ruler on the marks and cut four triangles from the corners. The resulting triangles should measure 10 on each short side. Set aside for use in Step 8. Note: The triangles will be larger than needed and will be trimmed later. 10 Center the 20 square on a vertical gold ribbon. The remaining square should measure 14 x 14. Fig Block Assembly Instructions 1. Sew one 1 ½ x 14 Fabric H strip to each side of the 14 Fabric A square. Sew one 1 ½ x 16 Fabric H strip to the top and bottom of the Fabric A square to make the center block. (Fig. 2). 2. Sew one 2 x 16 Fabric C strip to each side of the center block. Sew one 2 x 19 Fabric C strip to the top and bottom of the center block (Fig. 3). 3. Cut the 1 Fabric H piping strip approximately 1/2 longer than the borders of the center block. Fold each piece in half, wrong side together and press to make the piping. Pin (or baste) the piping in place on each side of the quilt with a ¼ overlap on each end (Fig. 4). Tip: If machine basting, sew with black thread slightly less than ¼ seam so stitches don t show. Fig. 2 Fig. 3 Fig Sasha K. Studio for EBI Fabrics, Inc. Reflections: Jewel Tone Quilt 2

Sew one 2 x 26 Fabric B strip to the top and bottom of the quilt top (Fig. 6)

4 4. Pin 2 ½ x 19 Fabric F strip to each side of the quilt top on top of the piping and sew in place catching the piping in the seam. Repeat with two 2 ½ x 23 Fabric F strips and the top and bottom of the quilt top (Fig. 5). Trim the excess piping on the back even with the seam allowance. 5. Sew one 2 x 23 Fabric B strip to each side of the quilt top. Sew one 2 x 26 Fabric B strip to the top and bottom of the quilt top (Fig. 6). 6. Turn the quilt top 45 and cut off each corner by aligning the 45 line of your ruler along one edge of the quilt top with the ¼ mark at the corner of the seam between the black piping and Fabric F strip. (Fig. 7) ¼ 45 line Fig. 5 Fig. 6 Fig Cut the 1 Fabric H piping strip to measure ½ longer than the long side of the Fabric A triangles. Fold the piping in half, wrong side together and press to make the piping. Pin (or baste) to the long side of one Fabric A triangle (Fig. 8). Repeat for the other three Fabric A triangles. 8. Center and sew one Fabric A triangle (with piping) to the Fabric B strip of each side of the quilt top (Fig. 9). N o t e : In the cover quilt, the triangles are positioned so that the Fabric A gold ribbons in the corner triangles are perpendicular to the gold ribbons in the center square. ** After the corner triangles are attached, trim the edges even and check that the quilt top is square. VERY IMPORTANT! In a perfect world, once the corner triangles are attached in Step 8, the quilt top should measure 27¼ x 27¼. However, if your quilt top measures differently (due to differences in sewing and cutting in Step 6), use the actual measurements rather than the given measurements to determine the length of strips to be applied. Always measure through the center (not the edges) of the quilt top to determine the length of the strips! 9. Sew one 2 x 27¼ Fabric E strip to each side of the quilt top. Sew one 2 x 30¼ Fabric E strip to the top and bottom of the quilt top (Fig. 10). Make 4 Fig. 8 Fig. 9 Fig Sasha K. Studio for EBI Fabrics, Inc. Reflections: Jewel Tone Quilt 3

5 10. Sew one 2 ½ x 30¼ Fabric F strip to each side of the quilt top. Sew one 2 ½ x 34¼ Fabric F strip to the top and bottom of the center block (Fig. 11). 11. Place one 4 ½ Fabric G square on the top left corner of the quilt top, right sides together (Fig. 12). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 12). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼ away from the sewn seam. Fig. 11 Fig Follow Figure 13 for the seam direction to add a 4 ½ Fabric G square to each of the remaining corners of the quilt top (Fig. 14). Fig. 13 Fig Repeat steps to add four 3 Fabric H squares to the four corners of the quilt top (Fig. 15). 14. Sew one 1 ½ x 34¼ Fabric G strip to each side of the quilt top. Sew one 1 ½ x 36¼ Fabric G strip to the top and bottom of the quilt top (Fig. 16). Fig. 15 Fig Sasha K. Studio for EBI Fabrics, Inc. Reflections: Jewel Tone Quilt 4

Quilt Top Assembly Instructions 15. Sew one 2 ½ x 57 Fabric D strip lengthwise to one 7 ½ x 57 Fabric F strip to make one D/F strip. Repeat to make four D/F strips total.

Start sewing the strip a ¼ from the top edge of the quilt top and stop a ¼ from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side. 17.

6 Quilt Top Assembly Instructions 15. Sew one 2 ½ x 57 Fabric D strip lengthwise to one 7 ½ x 57 Fabric F strip to make one D/F strip. Repeat to make four D/F strips total. Note: The strips will be approximately 2 longer than necessary for ease of sewing. 16. Center one 9 ½ x 57 D/F strip on one side of the quilt top and pin in place. Start sewing the strip a ¼ from the top edge of the quilt top and stop a ¼ from the bottom edge. DO NOT TRIM THE EXCESS. Repeat with the opposite side. 17. Repeat Step 16 to sew one 9 ½ x 57 D/F strip to the top and bottom of the quilt top, making sure to stop and start ¼ away from each end of the quilt top. To miter each corner, fold the quilt top on a diagonal, wrong sides together. This should line up the strips from adjacent sides (Fig. 17). 18. Starting at the sewn seam (represented by the arrow in Figure 17) draw a 45 line out to the edge of the fabric. Sew on the drawn line. Trim the excess fabric, leaving a ¼ seam allowance. Repeat this step with remaining corners (Fig. 18) 45 Quilt Top Folded on the Diagonal Fig Layer and quilt as desired. 20. Sew the six 2 ½ x 42 binding strips together end-to-end with 45 seams to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. 21. Bind as desired. Fig Sasha K. Studio for EBI Fabrics, Inc. Reflections: Jewel Tone Quilt 5

*fabric is directional **includes binding

*fabric is directional **includes binding Day at the Park Featuring fabrics from the Dog Park collection by Sarah Frederking for Fabric Requirements (A) 2931-88*... 2 ¼ yards (B) 2935-16... ½ yard (C) 2937-16... ⅞ yard (D) 2933-88... ½ yard (E)