IrDA Infrared Communication Module
|
|
- Stephen Pearson
- 6 years ago
- Views:
Transcription
1 Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA er. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into one single package. This module is designed for low power coumption. The very small package makes it a perfect fit for mobile devices. Also it provides the capability of IR remote control tramission for universal remote control applicatio. Features 1) Infrared LED, PIN photo diode, LED driver and receiver frequency formation circuit built in. Improvement of EMI noise protection by Shield Case. 2) Applied to SIR (9.6k to 115.2kbps), MIR (.576M, 1.152Mbps) and FIR(4Mbps). 3) Surface mount type. 4) Power down function built in. 5) Adjustable communication distance by LED load resistance value. 6) Infrared remote control tramission driver built-in. Applicatio Cellular phone, PDA, DC, Digital still camera, Printer, Handy terminal etc. Absolute maximum ratings (Ta=25 C) Parameter Symbol Limits Unit Supply voltage Input voltage cc / LEDA / in(3,4,5pin) to +.3 Operation temperature Storage temperature Topr Tstg 25 to 85 3 to 1 1) This applies to all pi basis ground pin (8pin). C C Recommended operating conditio Parameter Symbol Min. Typ. Max. Unit CC Supply voltage LEDA CC 1/9
2 Terminal description Pin No Terminal Circuit Function 1 LEDA 1 2 LED LED Anode Terminal LED drive power supply. Other power source can be used difference between LEDCC and CC. 2 LEDC LED Cathode Terminal 3 6k Tramitting Data Input Terminal H:LED radiant (='L') CMOS Logic Level Input. Holding ="H"status, LED will be turn off approximately 48 µs. 4 3k Receiving Data Output Terminal When (5pin)='H', the output will be pulled up to at approximately 3 kω. 5 /Mode Power-down Control and Mode SettingTerminal H: POWERDOWN L : OPERATION CMOS Logic Level Input. When input is "H", it will stop the receiving circuit, PinPD current and tramitting LED operation. 6 CC CC Supply voltage for Traceiver circuits. 7 8 GND GROUND Supply voltage for I / O pi (,,). Shield Case Connect to Ground. 2/9
3 Electrical characteristics (Unless otherwise noted, CC=3, LED CC =3, =3, Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Conditio Coumption current 1(SIR / MIR mode) Coumption current 2(FIR mode) input high voltage input low voltage input high current input low current LED anode current output high voltage output low voltage output rise time output fall time output pulse width(sir) Receiver latency time ICC1 ICC2 ICC3 Coumption current 3(at ).1.2 µa Tramission rate.96 4 Mbps input high voltage input low voltage input high current input low current PDH PDL IPDH IPDL 2/ / µa µa < Tramitter > < Receiver > TXH TXL ITXH ITXL ILED1 RXH RXL trr tfr tws twf1 twf2 trt 4 4 2/ µa =, At no input light 1 16 µa =, At no input light / µa µa µs µs =, At no input light =1.7 to 3.6 ( < CC) = = =1.7 to 3.6 ( < CC) = = IRXH= 2µA IRXL=2µA CL=15pF CL=15pF CL=15pF, 9.6k to kbps, duty19% output pulse width(mir1) twm CL=15pF,.576 Mbps, duty25% output pulse width(mir2) twm CL=15pF, Mbps, duty25% output pulse width(fir1) output pulse width(fir2) ma CL=15pF, 4 Mbps(125 pulse) CL=15pF, 4 Mbps(25 pulse) Optical characteristics (Unless otherwise noted, CC=3, LED CC =3, =3, Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Conditio Peak wave length λp nm Inteity IE 25 1 mw / sr 15 deg < θ L < 15 deg Halfangle θl / 2 Rise time / Fall time Optical over shoot Edge jitter Optical pulse width(mir) Optical pulse width(fir) Minimum irradiance in angular 1 Input halfangle Maximum emitting time Tr / Tf θd / 2 TLEDmax 1. This product is not designed for protection agait radioactive rays. 2. This product dose not include laser tramitter. 3. This product includes one PIN photo diode. 4. This product dose not include optical load. Tj Eemin1 ± Minimum irradiance in angular 2 Eemin2 2 Maximum irradiance in angular Eemax 5 ± deg % µw / cm 2 µw / cm 2 mw / cm 2 deg µs 1% to 9% TweM t=217 TweF t= deg < θ L < 15 deg, < 115.2kbps 15 deg < θ L < 15 deg, 115.2kbps 15 deg < θ L < 15 deg = < 3/9
4 Timing chart 1. Mode Setting (SIR / MIR / FIR) With there is a need for mode switch according to communication rate. For the mode setting, there are /Mode and. Please see below diagram for the set up of mode. (a) FIR Mode (b) SIR / MIR Mode / Mode / Mode ts = > 2 ts = > 2 tdmax=2µs tdmax=2µs Mode FIR Mode (4Mbps) Mode SIR / MIR Mode (9.6k-1.152Mbps) Fig Remote control tramitting When remote control signal is input to the terminal, remote control is tramitted. 3. Timing chart (use example) (a) Emitting When a pulse is inputted to terminal, LED is emitting, and a signal is tramitted. But, when H condition follows terminal, LED tur off the lights in the range of TLEDmax. less than TLEDmax more than TLEDmax (IrDA/RC emitting) (IrDA/RC emitting) (IrDA/RC emitting) LED emitting TLEDmax 4/9
5 (b) Detecting When it is received an optical signal, a signal outputs from terminal at the following timing. It is outputted in the pulse width fixed at the time of SIR mode (9.6k to 115.2kbps). It is outputted in the pulse width which is the same as the input signal at the time of MIR mode (.576M, 1.152Mbps) and FIR mode (4Mbps). But, as for the pulse width of the input signal, it is based on IrDA Physical Layer Specification. 1 SIR mode (output example) Light input less than 2.3µs more than 1.41µS more than 2.3µs approximately 2.3µs 3kΩ pull up 2 MIR mode (output example) Light input kΩ pull up 3 FIR mode (output example) Light input kΩ pull up 5/9
6 Dimeio (Unit : mm) R1. 8. R LED A PinPD.15± ± A Part Size (Shield Case underside size) 1.37± P.95 7= ±.1 NOTE 1. TOLERANCE : ±.2mm 2. COPLANARITY :.1mmMAX (.13).68±.1 UNIT : mm ETH871 6/9
7 AMP Photo Link Module Block diagram and application circuit 1 LEDA LEDCC AMP AMP POWER DOWN /Mode LEDC /Mode CC GND C1 Tramitter signal Receiver signal IrDA/RC Controller CC GND Attached components Part symbol C1 Recommended value 6.8µF, Ceramic or tantalum Ex.)TCFGA1A685M8R(ROHM) Notice Bigger capacitance is recommended with much noise from power supply. 7/9
8 Notes 1) LED CC (1pin), CC (6pin) and (7pin) There is no problem even if it is supplied separately from each power supply such as a fix voltage power supply and a battery power supply. ( < cc +.3) But, use it in the recommendation power supply voltage range. 2) Caution in designing board lay-out To get maximum potential from, please keep in mind following itruction. The line of (4pin) should be connected at backside via through hole close to pin lead. Better not to be close to photo diode side (8pin side). This is to minimize feedback supplied to photo diode from. The parts which generate noise such as DC / DC converter should be one s placed at more than a radius of 1.cm away from photo diode (8pin side). As for C1 between 6-8 pi, it should be one s placed close to. 3) Notes Please be sure to set up the (3pin) input to be L (under.6) except tramitting data. (For < 9µ sec. ON duty < 25%). Powerdown current might increase if exposed by strong light (ex. direct sunlight) at powerdown mode. Please use by the signal format which is specified by IrDA er1.3 (Low Power). There might be on error if used by different signal format. <Communication rate and pulse continuous time> Signaling Rate Modulation Rate Tolerance % of Rate Pulse Duration Minimum Pulse Duration Nominal Pulse Duration Maximum 9.6kbit/s RZI +/ µs 19.53µs 22.13µs 19.2kbit/s RZI +/ µs 9.77µs 11.7µs 38.4kbit/s RZI +/ µs 4.88µs 5.96µs 57.6kbit/s RZI +/ µs 3.26µs 4.34µs 115.2kbit/s RZI +/ µs 1.63µs 2.23µs.576Mbit/s RZI +/ Mbit/s RZI +/ single pulse 4PPM +/ Mbit/s double pulse 4PPM +/ Please pay attention to the le carefully. Dusts or scratch on the le may effect the characteristics of product, please handle it with care. 4) Eye safe Eye safe is based on EN6825-1(IEC amendment 2), Class1 Eye safe. 8/9
9 AMP Photo Link Module 5) Reference Please iert external resistance (R1, 1/4W) between LED anode terminal and LEDcc to limit the LED average coumption current for current limitation. In case of using R1, formula is as follows : LED resistance value : R1 [Ω], LED average coumption current : ILED [ma], Supply voltage : LEDCC [], minimum necessary of irradiant inteity Ie1 [mw/sr] R1 = 11 (LEDCC 1.45) / Ie1 5 [Ω] ILED = Duty (LEDCC 1.36) / (R1+4) [A] Duty : LED duty at emitting Please set up to be ILED < 18[mA] (Duty 25%). 1 LEDA R1 LEDCC AMP AMP POWER DOWN /Mode LEDC /Mode CC GND C1 /Mode CC GND 9/9
10 Appendix Notes No technical content pages of this document may be reproduced in any form or tramitted by any mea without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specificatio for the product described in this document are for reference only. Upon actual use, therefore, please request that specificatio to be separately delivered. Application circuit diagrams and circuit cotants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditio when designing circuits and deciding upon circuit cotants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustratio of such devices and not as the specificatio for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or licee to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communicatio devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical itruments, traportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to coult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapo of Mass Destruction. Appendix1-Rev1.1
IrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA er..2 (Low Power). The infrared LED, PIN photo diode, and LSI are all integrated into one single package.
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA Ver. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into
More informationIrDA Infrared Communication Module
Photo Link Module IrDA Infrared Communication Module is an infrared communication module for IrDA Ver. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into
More informationIrDA Infrared Communication Module
IrDA Infrared Communication Module is an infrared communication module for IrDA er. 1.3 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into one single package.
More informationIrDA Infrared Communication Module
IrDA Infrared Communication Module RPM96-H7 RPM96-H7 RPM96-H7 is an infrared communication module for IrDA er. 1.3 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated
More informationIrDA Infrared communication Module
Photo Link Module IrDA Infrared communication Module is an infrared communication module for IrDA Ver. 1.2 (Low Power). The infrared LED, PIN photo diode, LSI are all integrated into a single package.
More informationIrDA Infrared Communication Module
Photo ink Module Infrared Communication Module is an infrared communication module for er. 1.2 (ow Power). The infrared ED, PIN photo diode, SI are all integrated into a single package. This module is
More informationIrDA Infrared Communication Module
Photo ink Module Infrared Communication Module is an infrared communication module for er. 1.2 (ow Power). The infrared ED, PIN photo diode, SI are all integrated into a single package. This module is
More informationInfrared light emitting diode, top view type
Infrared light emitting diode, top view type The is a GaAs infrared light emitting diode housed in clear plastic. This device has a high luminous efficiency and a 9nm peak wavelength suitable for silicon
More informationInfrared light emitting diode, top view type
Infrared light emitting diode, top view type The has the response speed and luminous output necessary for image transmission in audio-visual applications. It can support almost all types of optical transmission
More information4V Drive Nch MOS FET RHU002N06 RHU002N06. Transistors. Rev.B 1/4. External dimensions (Unit : mm) Structure Silicon N-channel MOS FET transistor
4 Drive Nch MOS FET Structure Silicon N-channel MOS FET traistor External dimeio (Unit : mm) UMT3 Features ) Low on-resistance. 2) High ESD. 3) High-speed switching. 4) Low-voltage drive (4). 5) Drive
More informationSwitching (60V, 300mA)
Switching (60, 300mA)!Features ) Low on-resistance. 2) High ESD 3) High-speed switching. 4) Low-voltage drive (4). 5) Easily designed drive circuits. 6) Easy to use in parallel.!external dimeio (Units
More informationVideo signal switcher
Video signal switcher BA76N / BA76F The BA76N and BA76F are three-channel analog multiplexers with built-in mute, 6dB amplifier and 75Ω driver. The ICs designed for use in video cassette recorders, and
More informationQuad 2-input AND gate
Quad 2-input AND gate BU40B / BU40BF / BU40BF The BU40B, BU40BF, and BU40BF are dual-input positive-logic AND gates with four circuits mounted on a single chip. An inverter-type buffer is added to the
More informationVideo signal switcher
Video signal switcher BA76N / BA76F The BA76N and BA76F are three-channel analog multiplexers with built-in mute, 6dB amplifier and 7Ω driver. The ICs designed for use in video cassette recorders, and
More informationQuad 2-input NAND Schmitt trigger
Quad 2-input NAND Schmitt trigger BU4093B / BU4093BF / BU4093BF The BU4093B, BU4093BF, and BU4093BF are 4-circuit, 2-input NAND gates whose input pins all have a Schmitt trigger function. As the circuit
More informationDual comparators BA10393 / BA10393F / BA10393N. Standard ICs
Dual comparators BA9 / BA9F / BA9N The BA9, BA9F, and BA9N are dual comparators with open-collector output which allows wired OR connections. The operating power supply voltage ranges from to 6V for a
More informationQuad 2-channel analog multiplexer / demultiplexer
Quad 2-channel analog multiplexer / demultiplexer BU4B / BU4BF / BU4BF The BU4B, BU4BF, and BU4BF are multiplexers / demultiplexers capable of selecting and combining analog signals and digital signals
More informationHex Schmitt trigger BU4584B / BU4584BF / BU4584BFV. Standard ICs
Hex Schmitt trigger BU44B / BU44BF / BU44BF The BU44B, BU44BF, and BU44BF are inverter-type Schmitt trigger circuits, with six circuits mounted on a single chip. These are ideal when enhanced noise immunity
More information16-bit stereo D / A converter for audio applications
6-bit stereo D / A converter for audio applications The is a 6-bit stereo D / A converter designed for audio applications, and has an internal 2 oversampling circuit. Applications 6-bit stereo D / A converter
More informationDual high slew rate operational amplifier
Dual high slew rate operational amplifier BA6 / BA6F / BA6N The BA6, BA6F, and BA6N are dual operational amplifiers which achieve approximately twice the high output current of the BA, as well as featuring
More informationBA6840BFS / BA6840BFP-Y / BA6840BFP / BA6842BFS
3-phase motor driver BA6840BFS / BA6840BFP-Y / BA6840BFP / BA6842BFS The BA6840BFS, BA6840BFP-Y, BA6840BFP, and BA6842BFS are one-chip ICs designed for driving CD-ROM motors. They are high performance-ics
More informationQuad operational amplifier
Quad operational amplifier BA7 / BA7F The BA7 and BA7F are monolithic ICs with four operational amplifiers featuring internal phase compensation mounted on a single silicon chip. Either a dual or single
More informationNew Designs. Not Recommended for. General purpose transistor (isolated transistor and diode) QSL11 QSL11. Transistors. Rev.A 1/4
General purpose transistor (isolated transistor and diode) A 2SB7 and a RB46F are housed independently in a TSMT5 package. Applications DC / DC converter Motor driver Features ) Tr : Low CE(sat) Di : Low
More informationFM / TV front end BA4424N. Audio ICs
FM / TV front end The is a monolithic IC designed for FM front end use. It consists of an RF amplifier circuit, mixer circuit, local oscillation circuit, IF buffer amplifier, and a variable capacitor-diode
More informationHigh voltage, high current Darlington transistor array
BA2B / BA23B / BA23BF / BA24B High voltage, high current Darlington transistor array BA2B / BA23B / BA23BF / BA24B The BA2B, BA23B, BA23BF, and BA24B are high voltage, high current, high sustain voltage
More informationReversible motor driver
Reversible motor driver The BA6209 and BA6209N are reversible-motor drivers suitable for brush motors. Two logic inputs allow three output modes : forward, reverse, and braking. The motor revolving speed
More informationDC-DC Converter ( 20V, 4.0A)
DC-DC Converter ( 20V, 4.0)!Features ) Low on-resistance. (mω at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V)!External dimensions (Unit : mm) TSMT6 0.4 2.8.6 (3) ()
More informationGeneral purpose(dual transistors)
General purpose(dual transistors) FMY FMY Features ) Both the SA4K and SC3906K chips in an SMT package. ) PNP and NPN chips are connecter in a common emitter. External dimensions (Unit : mm) SMT.9..9 0.9
More informationDC-DC Converter ( 20V, 1.0A)
DC-DC Converter ( 20V,.0) Features ) Low on-resistance. (80mΩ at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V) pplications DC-DC converter External dimensions (Unit
More informationSwitching ( 30V, 4.5A)
Switching ( 30V, 4.5) Features ) Low On-resistance. (57mΩ at 4.5V) 2) High Power Package. 3) High speed switching. 4) Low voltage drive. (4.5V) External dimensions (Unit : mm) SOP8 0.4 (8) (5) () (4).27
More informationBP5232A25/BP5232A33/BP5233A33/BP5234A33 Power Module BP5232A25 / BP5232A33 / BP5233A33 / BP5234A33
BP55/BP5/BP5/BP5 Power Module DC / DC converter BP55 / BP5 / BP5 / BP5 The BP55, BP5, BP5 and BP5 are DC / DC converters that use PWM system and FM system. They contain control circuits, switching devices
More information4V Drive Nch MOS FET RSS085N05 RSS085N05. Transistor 1/4. Structure Silicon N-channel MOS FET. External dimensions (Unit : mm)
4V Drive Nch MOS FET Sucture Silicon N-channel MOS FET External dimensions (Unit : mm) SOP8 5.0 0.4.75 Features ) Built-in G-S Protection Diode. 2) Small and Surface Mount Package (SOP8). (8) (5) () (4)
More informationSwitching ( 30V, 5.0A)
Switching ( 30V, 5.0) Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (SOP8). External dimensions (Unit : mm) SOP8 0.4 (8) (5) () (4).27 5.0 pplication
More information4V Drive Nch+SBD MOSFET
4 Drive Nch+SBD MOSFET Structure Silicon N-channel MOSFET / Schottky barrier diode Dimensions ( : mm) TUMT5 2. Features ) Nch MOSFET and schottky barrier diode are put in TUMT5 package. 2) High-speed switching,
More information2.5V Drive Pch+Pch MOSFET
2.5V Drive Pch+Pch MOSFET Structure Silicon P-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Two Pch MOSFET transistors in a single TUMT6 package. 2) Mounting cost and area can be cut in half.
More informationGeneral purpose transistor (dual transistors)
General purpose transistor (dual transistors) Features 1) Both a SA37AK chip and SC41K chip in a EMT or UMT or SMT package. ) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3)
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (TSMT3). External dimensions (Unit : mm) TSMT3.0MX 2.9 0.85 0.4 0.7 (3) pplication
More information2.5V Drive Nch+SBD MOSFET
2.5 Drive Nch+SBD MOSFET US5U US5U Structure Silicon N-channel MOSFET / Schottky barrier diode Dimensions ( : mm) TUMT5 2.0 Features ) Nch MOSFET and schottky barrier diode are put in TUMT5 package. 2)
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Structure Silicon P-channel MOS FET Features ) Low On-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (TSMT3). External dimensions (Unit : mm) TSMT3
More informationDatasheetArchive.com. Request For Quotation
DatasheetArchive.com Request For Quotation Order the parts you need from our real-time inventory database. Simply complete a request for quotation form with your part information and a sales representative
More information2.5V Drive Pch MOS FET
2.5V Drive Pch MOS FET Structure Silicon P-channel MOS FET Features ) Low on-resistance. (90mΩ at 2.5V) 2) High power package. 3) High speed switching. 4) Low voltage drive. (2.5V) External dimensions
More information4V+2.5V Drive Nch+Pch MOSFET
4V+2.5V Drive Nch+Pch MOSFET US6M US6M Sucture Silicon N-channel / P-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package
More informationSwitching SP8M3 SP8M3. Transistors. External dimensions (Unit : mm)
Switching Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small and Surface Mount Package (SOP8). External dimensions (Unit : mm) SOP8 5.±.2 (5) (8) pplication Power switching, DC /
More informationNPN General Purpose Transistor
NPN General Purpose Transistor Features 1) BCEO < 45 (IC=1mA) 2) Complements the BC857B. External dimensions (Unit : mm) Package, marking, and Packaging specifications Part No. Packaging type SST3 Marking
More informationPower Transistor (80V, 1A)
Power Transistor (80V, A) SD898 / SD733 / SD768S / SD863 SD898 / SD733 / SD768S / SD863!Features ) High VCEO, VCEO=80V ) High IC, IC=A (DC) 3) Good hfe linearity 4) Low VCE (sat) ) Complements the SB60
More informationCircuit protection elements
Circuit protection elements IC protector Circuit protection elements Rohm s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short
More informationNPN General Purpose Transistor
NPN General Purpose Transistor!Features 1) BCEO > 4 (IC = 1mA) 2) Complements the UMT39 / SST39 / MMST39 / 2N39.!External dimensions (Units : mm) UMT394 ROHM : UMT3 EIAJ : SC7 2.±.2 1.3±.1...3 1.2±.1 2.1±.1.9±.1.2.7±.1.1±.
More information4bit LVDS Receiver BU90LV048. LVDS Interface ICs
LVDS Interface ICs 4bit LVDS Receiver BU90LV048 Description LVDS Interface IC of ROHM "Serializer" "Deserializer" operate from 8MHz to 150MHz wide clock range, and number of bits range is from 35 to 70.
More information2.5V Drive Nch+Pch MOSFET
2.5V Drive Nch+Pch MOSFET Structure Silicon N-channel / P-channel MOSFET Dimensions (Unit : mm) TSMT6 Features ) Low on-resistance. 2) Built-in G-S Protection Diode. 3) Small Surface Mount Package (TSMT6).
More informationPower management (dual transistors)
Power management (dual transistors) 2SA208 and DTC44EE are housed independently in a UMT package. Application Power management circuit Dimensions (Units : mm) UMT6 Features ) Power switching circuit in
More informationSulfur Tolerant Chip Resistors
Sulfur Tolerant Chip Resistors (0603 size) Features 1) Unique protect materials prevent from silver sulfide occurrence under sulfur enviromnet. 2) Highly recommended for automotive, industrial and Power
More information2.5V Drive Nch+Pch MOSFET
.V Drive Nch+Pch MOSFET EM6M EM6M Structure Silicon N-channel MOSFET / Silicon P-channel MOSFET Dimensions (Unit : mm) EMT6 Features ) Nch MOSFET and Pch MOSFET are put in EMT6 package. ) High-speed switching.
More informationApplications Suitable for use where low power consumption and a high degree of noise tolerance are required. BU4S01G2 BU4S11G2 BU4SU69G2 BU4S71G2
TECHNICAL NOTE General-purpose CMOS Logic IC Series (BUS Series) Single Gate CMOS Logic ICs BUSG, BUSG, BUSU9G, BUS7G, BUS8G, BUS8G Description The BUSxxxG are ch logic ICs encapsulated in
More informationUS6U37 Structure Dimensions TUMT6 for Features Applications Inner circuit Package specifications Designs Absolute maximum ratings Recommended New
2.5 Drive Nch+SBD MOSFET Structure Silicon N-channel MOSFET / Schottky barrier diode Features ) Nch MOSFET and schottky barrier diode are put in TUMT6 package. 2) High-speed switching, Low On-resistance.
More informationSIDE VIEW IRMS Mb/s Infrared Data Transceiver
SIDE VIEW IRMS6 Mb/s Infrared Data Transceiver Preliminary Dimensions in inches Features IrDA, HP-SIR, Local Talk and Sharp ASK Ultracompact package: H.0 mm x D.8 mm x L 9.8 mm Data rates from 9600 bit/s
More informationSERIES CATALOG. Photo Link Modules. Remote Control Receiver Module. IrDA Infrared Communication Module
SERIES CATALOG Photo Link Modules Remote Control Receiver Module IrDA Infrared Communication Module Remote Control Receiver Module Remote Control Receiver Module Remote Control Receiver Module Contents
More informationGP1F31T/R, GP1F32T/R, GP1F33TT/RR/RT, GP1C331/331A/332/333/334/335
GPFT/R, GPFT/R, GPFTT/RR/RT, GPC/A//// GPFT/R, GPFT/R, GPFTT/RR/RT, GPC/A//// Features. Low jitter ( : TYP. ). High speed tramission (8Mbps, NRZ ). Directly connectable to modulation /demoduration for
More informationGP1FA550RZ. Amp. Amp.
GPFA550TZ/ GPFA550TZ/ Features. Uni-diretional signal tramission for plastic optical fiber cables. The optical receiver can be directly connectable the TTL, due to the use of OPIC Applicatio. DVD players.
More informationTC74HC123AP,TC74HC123AF,TC74HC123AFN
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC123AP/AF/AFN TC74HC123AP,TC74HC123AF,TC74HC123AFN Dual Retriggerable Monostable Multivibrator The TC74HC123A is a high speed CMOS MONOSTABLE
More informationZHX1010. SIR Transceiver. Product Specification PS
Product Specification ZiLOG Worldwide Headquarters 532 Race Street San Jose, CA 95126-3432 Telephone: 408.558.8500 Fax: 408.558.8300 www.zilog.com This publication is subject to replacement by a later
More informationNPN Medium Power Transistor (Switching)
UMT2222A / SST2222A / Transistors NPN Medium Power Transistor (Switching) UMT2222A / SST2222A / Features 1) BCEO > 4 (IC=mA) 2) Complements the UMT297A / SST297A / MMST297A. Package, marking, and packaging
More informationTC74HC423AP,TC74HC423AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC423AP,TC74HC423AF Dual Retriggerable Monostable Multivibrator The TC74HC423A is a high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with
More information1.8V Drive Nch+Nch MOSFET
.8V Drive Nch+Nch MOSFET Structure Silicon N-channel MOSFET Dimensions (Unit : mm) TUMT6 Features ) Two Nch MOSFETs are put in TUMT6 package. 2) High-speed switching, Low On-resistance. 3).8V drive. 0.2Max.
More informationTFBS6614. Lowest Profile 4 Mbits/s (FIR) Infrared Transceiver Module VISHAY. Vishay Semiconductors
Lowest Profile 4 Mbits/s (FIR) Infrared Transceiver Module Description The Vishay is the lowest profile (2.7 mm) 4 Mbit/s Infrared Data Transceiver module available. A PIN photodiode, an infrared emitter
More informationTC74HC07AP, TC74HC07AF
Hex Buffer (open drain) TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC4HC0AP, TC4HC0AF TC4HC0AP/AF The TC4HC0A is a high speed CMOS BUFFER fabricated with silicon gate C 2 MOS technology.
More informationBand-pass filter for spectrum analyzer for car audio systems BA3834F
1/4 Structure : Product : Type : Silicon Monolithic Integrated Circuit Band-pass filter for spectrum analyzer for car audio systems Function : 1. Built-in band pass filter for spectrum analyzer. is for
More informationTOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7W125FU Dual BUS Buffer The TC7W125FU is a high speed C 2 MOS Dual BUS Buffers fabricated with silicon gate C 2 MOS technology. It achieves
More informationPower management (dual transistors)
Power management (dual transistors) SC8 and SK39 are housed independently in a UMT package. Application Power management circuit Dimensions (Units : mm) Features ) Power switching circuit in a single package.
More information2- φ2.0 ± MIN. (7.25) (1.27) (2.54) *2 For 5 seconds. ( Unless otherwise specified, Ta = 0 to + 70 C) *3*4IF= 30mA, V CC= 5V
Photointerrupter with Encoder Function Features 1. -phase ( A, B ) digital output. Possible to use plastic disk 3. High sensing accuracy ( slit pitch : mm ) 4. TTL compatible output 5. Compact and light
More information1.5V Drive Nch MOSFET
.5V Drive Nch MOSFET Sucture Silicon N-channel MOSFET Dimensions (Unit : mm) TSMT3 Features ).5V drive 2) Low On-resistance. 3) Built-in G-S Protection Diode. 4) Small Surface Mount Package (TSMT3). pplication
More information2.5V Drive Nch+Pch MOSFET
2.5V Drive Nch+Pch MOSFET Sucture Silicon P-channel MOSFET Silicon N-channel MOSFET Dimensions (Unit : mm) TSMT6 Features ) The combines Pch MOSFET with a Nch MOSFET in a single TSMT6 package. 2) Low on-state
More informationTOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7S66F, TC7S66FU
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7S66F, TC7S66FU Bilateral Switch The TC7S66 is a high Speed C 2 MOS Bilateral Switch fabricated with silicon gate C 2 MOS technology. It coists
More informationTC7WPB8306L8X,TC7WPB8307L8X
CMOS Digital Integrated Circuits Silicon Monolithic TC7WPB8306L8X,TC7WPB8307L8X TC7WPB8306L8X,TC7WPB8307L8X 1. Functional Description Low-Voltage, Low-Power 2-Bit Dual-Supply Bus Switch 2. General The
More informationTC74HC153AP, TC74HC153AF TC74HC253AP, TC74HC253AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC153AP, TC74HC153AF TC74HC253AP, TC74HC253AF TC74HC153AP/AF TC74HC253AP/AF Dula 4-Channe Multiplexer Dual 4-Channel Multiplexer with 3-State
More informationGP1UD26XK Series/GP1UD27XK Series GP1UD28XK Series/GP1UD28YK Series
GP1UD26XK Series/GP1UD27XK Series/GP1UD28XK Series/GP1UD28YK Series GP1UD26XK Series/GP1UD27XK Series GP1UD28XK Series/GP1UD28YK Series Features 1. Low dissipation current:max.2µa (at V CC =3V) (1/12 of
More informationTC74AC390P, TC74AC390F
Dual Decade Counter TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74AC390P, TC74AC390F TC74AC390P/F The TC74AC390 is an advanced high speed CMOS DUAL DECADE COUNTER fabricated with silicon
More informationIntegrated Low Profile Transceiver Module for Telecom Applications IrDA Standard
Integrated Low Profile Transceiver Module for Telecom Applications IrDA Standard TFDU4203 Description The miniaturized TFDU4203 is an ideal transceiver for applications in telecommunications like mobile
More informationTC7WZ74FU, TC7WZ74FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7WZ74FU, TC7WZ74FK D-Type Flip Flop with Preset and Clear TC7WZ74FU/FK Features High output current: ±24 ma (min) at = 3 Super high speed operation:
More informationNPN General Purpose Transistor
UMT39 / SST39 / MMST39 Transistors NPN General Purpose Transistor UMT39 / SST39 / MMST39 Features 1) BCEO > (IC = 1mA) 2) Complements the UMT39 / SST39 / MMST39. Dimensions (Unit : mm) UMT39 ROHM : UMT3
More informationSingle Digit LED Numeric Display
LA-40 D / N Series LED displays Single Digit LED Numeric Display LA-40 D / N Series LA-40 D / N series is developed because of the demand for small single digit LED Numeric Display. Materials of emission
More informationThis product complies with the RoHS Directive (EU 2002/95/EC).
This product complies with the RoS Directive (EU 2002/95/EC). Infrared Optical Module (IrDA) Infrared data link for cellular phones, peripheral devices Features Compliant with IrDA Ver.1.4 ight emitting
More informationTC74HC4538AP, TC74HC4538AF, TC74HC4538AFT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC4538AP/AF/AFT TC74HC4538AP, TC74HC4538AF, TC74HC4538AFT Dual Retriggerable Monostable Multivibrator The TC74HC4538A is a high speed CMOS
More informationTC74HC4094AP, TC74HC4094AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC494AP/AF TC74HC494AP, TC74HC494AF 8-Bit Shift and Store Register (3-state) The TC74HC494A is a high speed CMOS 8-BIT SHIFT AND STROBE REGISTER
More informationSlim Series SIR Transceiver
Slim Series SIR Transceiver Product Specification ZiLOG Worldwide Headquarters 532 Race Street San Jose, CA 95126-3432 Telephone: 408.558.8500 Fax: 408.558.8300 www.zilog.com This publication is subject
More informationTC7W74FU, TC7W74FK TC7W74FU/FK. D-Type Flip Flop with Preset and Clear. Features. Marking
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7W74FU, TC7W74FK TC7W74FU/FK D-Type Flip Flop with Preset and Clear The TC7W74 is a high speed C 2 MOS D Flip Flop fabricated with silicon gate
More informationTC4538BP,TC4538BF TC4538BP/BF. TC4538BP/TC4538BF Dual Precision Retriggerable/Resettable Monostable Multivibrator. Features.
TC438BP/BF TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC438BP,TC438BF TC438BP/TC438BF Dual Precision Retriggerable/Resettable Monostable Multivibrator The TC438BP/BF is the retriggerable/resettable
More informationBand-pass Filter for Spectrum Analyzer Indication
TECHNICAL NOTE Audio Accessory IC Series Band-pass Filter for Spectrum Analyzer Indication BA3835F, BA3830F, BA3834F Description As BA3835F, BA3830F, and BA3834F contain band pass filters for spectrum
More informationTC74HC4020AP, TC74HC4020AF TC74HC4040AP, TC74HC4040AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC4020AP, TC74HC4020AF TC74HC4040AP, TC74HC4040AF TC74HC4020,4040AP/AF TC74HC4020AP/AF TC74HC4040AP/AF 14-Stage Binary Counter 12-Stage Binary
More information74HC259D 74HC259D. 1. Functional Description. 2. General. 3. Features. 4. Packaging Rev Toshiba Corporation
CMOS Digital Integrated Circuits 74HC29D Silicon Monolithic 74HC29D 1. Functional Description -Bit Addressable Latch 2. General The 74HC29D is a high speed CMOS ADDRESSABLE LATCH fabricated with silicon
More informationThe module has been designed to the IrDA (Infrared Data Association) LED BUTTRESS LEAD* TXD GND
H Infrared IrDA Compliant Transceiver Technical Data HSDL-1 Features Low Cost Infrared Data Link Guaranteed to Meet IrDA Physical Layer Specifications 1 cm to 1 Meter Operating Distance 3 Viewing Angle
More informationTC74HC139AP, TC74HC139AF
Dual 2-to-4 Line Decoder TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC139AP, TC74HC139AF TC74HC139AP/AF The TC74HC139A is a high speed CMOS 2-to-4 LINE DECODER/DEMULTIPLEXER fabricated
More informationTFDU4100/TFDS4500/TFDT4500
TELEFUNKEN TFDU4100/TFDS4500/TFDT4500 2.7 5.5V Serial Infrared Transceiver Module Family (SIR, 115.2 kbit/s) Features Compliant to IrDA 1.2 (up to 115.2 kbit/s) Wide Operating Voltage Range (2.7 to 5.5
More informationOLI600: Miniature High-Speed Schmitt Trigger Optocoupler for Hybrid Assembly
DATA SHEET OLI600: Miniature High-Speed Schmitt Trigger Optocoupler for Hybrid Assembly Features Performance guaranteed over -55 C to +125 C ambient temperature range Guaranteed minimum CMR traient immunity
More information(0.35) (0.2) 2.2. P 75 mw (0.65) 1.4
GLMNxMP Series GLMNxMP Series Features. Compact and thin package 2. Surface mount type 3. 2-way mounting;top view/side view 4. Reflow soldering 5. High output type:glmnmp 6. General purpose type:glmnmp
More information74HC153D 74HC153D. 1. Functional Description. 2. General. 3. Features. 4. Packaging Rev Toshiba Corporation
CMOS Digital Integrated Circuits 74HC153D Silicon Monolithic 74HC153D 1. Functional Description Dual 4-Channel Multiplexer 2. General The 74HC153D is high speed CMOS DUAL 4-CHANNEL MULTIPLEXERs fabricated
More informationOLH5800/5801: Hermetic Opto-Isolated High-Speed Power MOSFET Drivers
DATA SHEET OLH800/801: Hermetic Opto-Isolated High-Speed Power MOSFET Drivers Features Rugged and reliable hermetic Dual Inline Package (DIP) Performance guaranteed over full military temperature range
More informationAudio Accessory IC Series Ground Isolation Amplifier BA3121F, BA3123F Rev.A 1/8
Audio Accessory IC Series Ground Isolation Amplifier BA3121F, BA3123F No.09092EAT01 Description The BA3121F/BA3123F are ground isolation amplifiers developed for use in car audio applications. This IC
More informationTC74HC595AP, TC74HC595AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC595AP, TC74HC595AF 8-Bit Shift Register/Latch (3-state) TC74HC595AP/AF The TC74HC595A is a high speed 8-BIT SHIFT REGISTER/LATCH fabricated
More informationOld Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April 1 st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took
More information