WAS4732D WAS4732D. Descriptions. Features. Order information. Applications. MIC/GND Cross-point Switch for EU/US Headphone Compatible Application
|
|
- Juliana Augusta Tucker
- 5 years ago
- Views:
Transcription
1 / Cross-point Switch for EU/US Headphone Compatible Application Descriptions The is a 2x2 cross-point switch that is used to interchange the Ground and connections on a headphone connector. The Ground switch has an ultra-low Ron of 0.1 Ω (typical) to minimize voltage drop across it, preventing undesired increase in headphone ground reference voltage. the switch state is controlled via the input. When =High, is connected to and is connected to ; When =Low, is connected to and is connected to. An internal pull-down 2MΩ resistor on input sets the default state of the switch. The is available in DFN2x2-6L package. Standard product is Pb-Free and halogen-free. Features Supply voltage : 2.3 ~ 5.0V ultra-low Ron for Switch : 100mΩ low Ron for Switch : 4.5 Ω Break-Before-Make Switching Low quiescent current over an Expanded Control Range ESD Rating (HBM JEDEC: JESD22-A114) IO to Power to : ± 8KV : ± 5KV Replace TS3A26746E with compatible PCB Layout Applications Cell phone Tablet Others Music Players 1 2 DFN2x2-6L 3 4 Pin configuration (Top view) = Device code ** = Year & Week (A~Z) Marking Order information DA ** Device Package Shipping -6/TR DFN2x2-6L 3000/Reel&Tape Will Semiconductor Ltd. 1 Feb, Rev. 1.0
2 Pin descriptions Pin Number Symbol Descriptions 1 Logic Control 2 Port 3 Ground 4,5 COM X Audio Signal Port 6 Positive Power Supply Function descriptions Logic () Function 0 is connected to and is connected to 1 is connected to and is connected to Functional Block MΩ 1 Typical Applications Audio Jack Bias VBAT L R Audio Band / / GPIO 2MΩ Will Semiconductor Ltd. 2 Feb, Rev. 1.0
3 Absolute Maximum Ratings (1) Parameter Symbol Value Unit Supply Voltage V CC -0.3 ~ 6.5 V Control Voltage VIN X -0.3 ~ 6.5 V DC Voltage (2) V INPUT -0.3 ~ 6.5 V Continuous Current through COMx ± 100 ma Storage Temperature Range T STG -65 ~ 150 Junction Temperature under Bias T J 150 Lead Temperature (Soldering, 10 seconds) T L 260 Power Dissipation P D 250 mw Recommend operating ratings (3) Parameter Symbol Value Unit Supply Voltage Operating V CC 2.3 ~ 5.0 V Control Voltage V IN 0.0 ~ V CC V Signal Voltage V IS 0.0 ~ V CC V Operating Temperature T A -40 ~ 85 Raise and Fall Time(Control V CC =2.3~3.6V) t r,t f 0 ~ 10 ns/v Thermal Resistance R θja 350 /W Note: 1. Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. 2. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. 3. Control input must be held high or Low, it must not float. Will Semiconductor Ltd. 3 Feb, Rev. 1.0
4 DC Electronics Characteristics (Ta=25, =3.6V, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Unit logic high level logic low level Supply quiescent current Increase in I CC per input V IH V IL I CC I CCT : 3.0 ~ V : 2.3 ~ V : 3.0 ~ V : 2.3 ~ V I OUT =0, V IN =0 or V IN = 1.0 ua I OUT =0, =4.5 V IN >1.8 or V IN < ua leakage current I IN V = 2.0 ua Off state switch leakage current I OFF ±1.0 ua On state switch leakage current I ON ±1.0 ua =2.8V, path On-Resistance path On-Resistance match path On-Resistance flatness path On-Resistance path On-Resistance match path On-Resistance flatness R ON1 V SW = 0 ~ 1V 0.1 Ω =2.8V, R ON1 V SW = 0 ~ 1V 0.02 Ω =2.8V, R FLAT1(ON) R ON2 V SW = 0 ~ 1V 0.02 Ω =2.8V, V SW = 0 ~1.8V 4.5 Ω =2.8V, R ON2 V SW = 0 ~ 0.5 Ω =2.8V, R FLAT2(ON) V SW = 0 ~1.8V 1.5 Ω Will Semiconductor Ltd. 4 Feb, Rev. 1.0
5 AC Electronics Characteristics (Ta=25, =3.6V, unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Unit Turn-On Time T ON V IS =1.5V, C L =35pF, R L =50Ω Turn-Off Time T OFF V IS =1.5V, C L =35pF, R L =50Ω Break-Before-Make time T BBM V IS =1.5V, C L =35pF, R L =50Ω 150 ns 150 ns 800 ns -3dB Bandwidth BW R L =50Ω, C L =0pF 30 MHz Off isolation Crosstalk Total Harmonic Distortion () OIRR Xtalk THD F=1KHz, R L =50Ω -50 db F=10KHz, R L =50Ω -50 db F=1KHz, R L =50Ω -50 db F=10KHz, R L =50Ω -50 db F=20Hz to 20KHz R L =1KΩ,V IS =30mVpp 0.01 % Capacitance (Ta=25 unless otherwise noted) Parameter Symbol Conditions Min. Typ. Max. Unit Off capacitance C OFF F=100KHz, = pf On capacitance C ON F=100KHz, = pf Will Semiconductor Ltd. 5 Feb, Rev. 1.0
6 Test Circuits V V IH V IL 50% V IS COMx / V O I O 0V T ON T OFF 90% 90% Ron = V / I O ON-Resistance (R ON ) ON/OFF Time Waveforms (T ON / T OFF ) Network analyzer Network analyzer Crosstalk (Xtalk) Off isolation (OIRR) Network analyzer Audio analyzer CL Bandwidth (BW) THD+N Will Semiconductor Ltd. 6 Feb, Rev. 1.0
7 Package Information DFN2x2-6L Symbol Dimensions in millimeter Min. Typ. Max. A A D E b c e 0.65 BSC. Nd 1.30 BSC. L h Will Semiconductor Ltd. 7 Feb, Rev. 1.0
WAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information
WAS4729QB Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability Http//:www.sh-willsemi.com Descriptions The WAS4729QB is a high performance, dual Single Pole Double Throw
More informationWAS4723Q WAS4723Q. Order information 1 2 VCC NO1. Low On Resistance, Dual SPDT Analog Switch. Http//: QFN L
WAS4723Q Low On Resistance, Dual SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4723Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron
More informationWAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low
More informationWAS4799Q WAS4799Q. Order information. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4799Q Low On Resistance, Quad SPDT Analog Switch Descriptions The WAS4799Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More informationFSA Ω Low-Voltage Dual DPDT Analog Switch
March 2013 FSA2467 0.4Ω Low-Voltage Dual DPDT Analog Switch Features Typical 0.4 On Resistance (R ON ) for +2.7V Supply Features Less then12µa ICCT Current when Sn Input is Lower than V CC 0.25 Maximum
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationBCT4222B BCT4222B. High-Speed DPDT Analog Switch. General Description. Features. Connection Diagram. Applications
BCT4222B Features V CC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 (TYP) ON-Resistance Flatness: 0.08 (TYP) High Off Isolation: 57dB at 10MHz 54dB (10MHz) Crosstalk
More informationUSB2.0 Hi-Speed and Audio Switches with Negative Signal Capability
BCT4153 with Negative Signal Capability GENERAL DESCRIPTION The BCT4153 is a double-pole double-throw (DPDT) analog switch with multiplexes USB2.0 and negative signal audio analog signals. One Channel
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationPI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationBCT4222B 350MHz DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at
More informationMAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
More informationWS4665 WS A, 14mΩLoad Switch with Quick Output Discharge and Adjustable Rise Time DESCRIPTION FEATURES. Order information APPLICATIONS
6A, 14Load Switch with Quick Output Discharge and Adjustable Rise Time http//:www.sh-willsemi.com WS4665 DESCRIPTION The WS4665 is a single channel load switch that provides configurable rise time to minimize
More informationFSA1259 / FSA1259A Low-Voltage, 1Ω Dual SPST Analog Switch with Power-Off Isolation
FS1259 / FS1259 Low-Voltage, 1Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (=0V) 1Ω On Resistance (R ON) for 4.5V 0.25Ω Maximum R ON Flatness for 4.5V Space-Saving, US8
More informationLow-Voltage, 1 Ω Dual SPST Analog Switch with Power-Off Isolation. Description
FS1259 Low-Voltage, 1 Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (V CC =0 V) 1 Ω On Resistance (R ON ) for 4.5V V CC 0.25 Ω Maximum R ON Flatness for 4.5 V V CC Space-Saving,
More informationFSA110 Audio and Wired-OR USB2.0 Hi-Speed (480Mbps) Switch with Negative Signal Capability and Built-in Termination
July 2013 FSA110 Audio and Wired-OR USB2.0 Hi-Speed (480Mbps) Switch with Negative Signal Capability and Built-in Termination Features 6pF Typical Switch Off Capacitance for HS USB 2.5Ω Typical On Resistance
More informationFSA Ω Low-Voltage SPDT Analog Switch
F5157 0.4Ω Low-Voltage PDT nalog witch Features Typical 0.4Ω On Resistance (R ON ) for +2.7V upply F5157 Features Less than 12μ I CCT Current When Input is Lower than 0.25Ω Maximum R ON Flatness for +2.7V
More informationFeatures. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
More informationFSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths
March 2013 FSA321 USB2.0 Hi-Speed (480Mbps) and Audio Switches with Negative Signal Capability and Built-in Termination on Unselected Audio Paths Features Audio: 1.8 Typical On Resistance HS-USB: 8 Typical
More informationUltra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
More informationBCT MHz DPDT Analog Switch for USB2.0 Hi-Speed
BCT4227 700MHz DPDT Analog Switch for USB2.0 Hi-Speed Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off
More informationFSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
April 2003 Revised July 2004 FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input General Description The FSAT66 is a high speed single pole/single throw normally
More informationDual DPDT Ultra-Low R ON
General Description Dual DPDT Ultra-Low R ON Analog Switch UM3699A UM3699A QFN16 3.0 3.0 The UM3699A are dual independent ultra low R ON DPDT analog switches. These devices are designed for low operating
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More information5V Capable Low-Voltage DPDT Analog Switch
5V Capable Low-Voltage DPDT Analog Switch General Description is a 5V high quality low-voltage double-pole double-throw (DPDT) analog switch. supply voltage is designed to operate from 2.5V to 5.5V. Supply
More informationSTG3699B. Low voltage 0.5 Ω max, quad SPDT switch with break-before-make feature. Features. Description
Low voltage 0.5 Ω max, quad SPDT switch with break-before-make feature Features High speed: t PD = 1.5 ns (typ.) at V CC = 3.0 V t PD = 1.5 ns (typ.) at V CC = 2.3 V Ultra low power dissipation: I CC =0.2μA
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationFSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch
March 2008 FSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Features -40dB Off Isolation at 250MHz -40dB Non-adjacent Channel Crosstalk at 250MHz On Resistance: 4.5Ω Typical (RON) -3dB Bandwidth:
More informationBCT4221 High-Speed & Low-Ron DPDT Analog Switch
BCT4221 High-Speed & Low-Ron DPDT Analog Switch General Description The BCT4221 double-pole double-throw (DPDT) analog switch multiplexes Hi-speed (480MHz) USB and audio analog signals. One Channel has
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationDescription. Features. Applications. Pin Assignment. Pin Description Pin No Pin Name. Logic Function Table Logic Inputs(S) PI5A4157
Low Voltage SPDT 0.8Ω Analog Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage
More information0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability
5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional
More informationFSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch
FSUSB43 Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch Features Over-Voltage Tolerance (OVT) on all USB Ports up to 5.25V without External Components Low On Capacitance: 3.7pF Typical Low On
More informationFSA2268 / FSA2268T Low-Voltage Dual-SPDT (0.4 ) Analog Switch with 16kV ESD
FSA2268 / FSA2268T Low-Voltage Dual-SPDT (0.4 ) Analog Switch with 16kV ESD Features 0.4Ω Typical On Resistance (R ON) for +3.0V Supply 0.25Ω Maximum R ON Flatness for +3.0V Supply -3db Bandwidth: > 50MHz
More informationFeatures. Applications
PRELIMINARY DATASHEET IDTHS421V16 Description The IDTHS421V16 is a bi-directional, low power, Quad single-pole, double-throw (SPDT) hybrid switch targeted at dual SIM card multiplexing. It is optimized
More informationFSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch
FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Features -40dB Off Isolation at 30MHz -60dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 1.1GHz On Resistance: 4.5 (Typical) Low Power
More informationSTG3693. Low voltage high bandwidth quad SPDT switch. Features. Description
Low voltage high bandwidth quad SPDT switch Datasheet - production data Features Ultra low power dissipation: I CC = 0.3 µa at T A = 125 C Low on-resistance: R DS(on) = 4 Ω (T A = 25 C) at V CC = 3.0 V
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QFN16 3.0 3.0 UMA QFN16 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single
More informationFSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch
FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Features 30dB off isolation at 250MHz 30dB non-adjacent channel crosstalk at 250MHz 4.5Ω typical on resistance (R ON ) 3dB bandwidth: >720MHz Low
More informationFSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL )
FSA3031 Dual High-Speed USB2.0 with Mobile High-Definition Link (MHL ) Features Low On Capacitance: 4.6 pf/6.75 pf MHL/USB (Typical) Low Power Consumption: 30 μa Maximum Supports MHL Rev. 2.0 Passes 1080
More informationFSA2269 / FSA2269TS Low-Voltage Dual-SPDT (0.4 ) Analog Switch with Negative Swing Audio Capability
July 2013 FSA2269 / FSA2269TS Low-Voltage Dual-SPDT (0.4 ) Analog Switch with Negative Swing Audio Capability Features 0.4 Ω Typical On Resistance (R ON) for +3.0 V Supply 0.25 Ω Maximum RON Flatness for
More informationFSAV MHz, 4-Channel, 2:1 Video Switch
Features -50dB Off Isolation at 30MHz -80dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 800MHz On Resistance: 4 (Typical) Low Power Consumption: 1µA (Maximum) Control Input TTL Compatible Applications
More informationSGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability
GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance
More informationObsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s) STG3684
LOW VOLTAGE 0.5Ω MAX DUAL SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 3.0V t PD = 0.4ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationFST Bit Low Power Bus Switch
2-Bit Low Power Bus Switch General Description The FST3306 is a 2-bit ultra high-speed CMOS FET bus switch with TTL-compatible active LOW control inputs. The low on resistance of the switch allows inputs
More informationAS11P2TLR. Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make. Description. Features
Low voltage 1 Ω single-pole double-throw analog switch with breakbefore-make feature Description Datasheet - production data Features DFN6L High speed: t PD = 130 ps (typ.) at V CC = 3.0 V t PD = 140 ps
More informationAOZ Ω Low-Voltage Dual-DPDT Analog Switch. General Description. Features. Applications AOZ6275
.35Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6275 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65 V to 4.3 V supply. The OZ6275
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationFSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect
July 2013 FSUSB45 High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0 pf Typical Low On Resistance: 3.9 Ω Typical Low Power Consumption: 1 μa Maximum
More informationPI3USB223. USB 2.0 High-Speed and Audio Switches with Negative Signal Capability D+/R D-/L V DD ASEL GND VBUS. Description. Features.
with Negative Signal Capability Features Single +2.7V to +4.4V Supply Voltage Low 50µA Supply Current -3dB Bandwidth: 1500MHz (typ) Low 2.5Ω(typ)On-Resistance THD+N: 0.02% Shorting D+/R and D-/L to Vbus
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More informationFSUSB45 Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect
December 2009 FSUSB45 Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features Low On Capacitance: 7.0pF Typical Low On Resistance: 3.9Ω Typical Low Power Consumption: 1μA Maximum -
More informationSGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode
Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationAME. 1-Ohm Low Voltage SPDT Analog Switch AME4620. Functional Block Diagram. General Description. Features. Applications
4620 General Description The 4620 analog switches feature low ON resistance, single-pole, double-throw (SPDT) with wide operating single power supply voltage range, from 1.8V to 5.5V. Functional Block
More informationSTG3699AQTR LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE
LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE HIGH SPEED: t PD = 1.5ns (TYP.) at V CC = 3.0V t PD = 1.5ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
More information700 MHz, -3 db Bandwidth; Single SPDT Analog Switch
7 MHz, -3 db Bandwidth; Single SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in single SPDT. It achieves 5 switch on resistance, greater than 7 MHz -3 db bandwidth
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationQuad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The is a Quad, bidirectional, single-pole/doublethrow (SPDT) CMOS Video analog switches (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QF 3.0 3.0 UMA QF 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single +1.8V
More informationAOZ Ω Low-Voltage Dual-SPDT Analog Switch. General Description. Features. Applications
OZ6233 0.35Ω Low-Voltage Dual-PDT nalog witch General Description The OZ6233 is a 0.35Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6233 operates from a single 1.65V to 3.6V supply.
More informationNCN1154. USB 2.0 High Speed, UART and Audio Switch with Negative Signal Capability
USB 2.0 High Speed, UART and Audio Switch with Negative Signal Capability The NCN1154 is a DP3T switch for combined true ground audio, USB 2.0 high speed data, and UART applications. It allows portable
More information3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers
DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual
More informationNS5S1153. DPDT USB 2.0 High Speed / Audio Switch with Negative Swing Capability
DPDT USB 2.0 High Speed / Audio Switch with Negative Swing Capability The NS5S1153 is a DPDT switch for combined true ground audio and USB 2.0 high speed data applications. It allows portable systems to
More informationFSAV433 High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
January 2011 FSAV433 High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch Features Ground between Channels to Optimize Isolation and Reduce Hostile Crosstalk -70dB Non-Adjacent Channel Crosstalk at 30MHz
More information6V8 * ESDA6V8UD ESDA6V8UD. Descriptions. Features. Order information. Applications. http//:
4-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationNCN1154. DP3T USB 2.0 High Speed / Audio Switch with Negative Swing Capability
DP3T USB 2.0 High Speed / Audio Switch with Negative Swing Capability The NCN1154 is a DP3T switch for combined true ground audio, USB 2.0 high speed data, and UART applications. It allows portable systems
More informationFSAV430 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch
查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 December 2004 Revised December 2004 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch General Description is a high performance Quad SPDT (2-to-1
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationSTG5682. Low voltage dual SPDTswitch with negative rail capability. Features. Description
Low voltage dual SPDTswitch with negative rail capability Features Distortion-free negative signal throughput down to V CC -5.5V Wide operating voltage range: V CC (Opr) = 1.65V to 4.5V single supply Ultra
More informationFSA806 USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability
July 2012 FSA806 USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability Features 3:1 Switch Handles: - Audio Headsets - UART - Up to Two High- and Low-Speed USB Data Negative-Swing-Capable
More informationPI5V330S. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features. Description. Block Diagram. Pin Configuration.
Features High-performance solution to switch between video sources Wide bandwidth: 570 MHz (typical) Low On-Resistance: 5Ω (typical) Low crosstalk at 10 MHz: 80dB Ultra-low quiescent power (0.1µA typical)
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationAPL3157. Applications. Pin Configuration. High-Density, +5.5V Capable DPDT Analog Switches
High-Density, +5.5V Capable DPDT Analog Switches Features Negative Audio and Video Signal Capable -0.3V to +5.5V Analog Signal Range Independent from VCC On-Resistance 0.2W (typ) +2.9V to +5.5V Single-Supply
More informationNLAS6234. Audio DPDT Switch with Noise Suppression
Audio DPDT Switch with Noise Suppression Description The NLAS6234 is a DPDT switch featuring Popless noise suppression circuitry designed to prevent pass through of undesirable transient signals known
More informationPI3USB10LP-A. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Description. Features.
Features USB 2.0 compliant (high speed and full speed) R ON is 5.5Ω typical @ V CC = 3.0V Low bit-to-bit skew Low Crosstalk: 40dB @ 500 Mbps Off Isolation: 35dB @ 500 Mbps Near-Zero propagation delay:
More informationFSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer
July 2013 FSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer Features Switch Type 3:1 USB Switch USB USB 2.0 High-Speed & Full-Speed Compliant Break-Before-Make Time 126µs R ON 6Ω Typical C ON 6pF Typical
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More informationFault Protection and Detection, 10 Ω RON, Quad SPST Switches ADG5412F-EP
Enhanced Product FEATURES Overvoltage protection up to 55 V and +55 V Power-off protection up to 55 V and +55 V Overvoltage detection on source pins Low on resistance: Ω On-resistance flatness:.5 Ω 5.5
More informationNLAS3699B. Dual DPDT Ultra Low R ON Switch
Dual DPDT Ultra Low R ON Switch The NLAS3699B is a dual independent ultra low R ON DPDT analog switch. This device is designed for low operating voltage, high current switching of speaker output for cell
More informationNLAS323. Dual SPST Analog Switch, Low Voltage, Single Supply A4 D
Dual SPST Analog Switch, Low Voltage, Single Supply The NLAS323 is a dual SPST (Single Pole, Single Throw) switch, similar to /2 a standard 466. The device permits the independent selection of 2 analog/digital
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel
More informationFSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch
Click to see this datasheet in Simplified Chinese! FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch Features Low On Capacitance: 3.7pF (Typical) Low On Resistance: 6.5Ω (Typical) Low Power
More informationPI5A3158B Low Voltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch
2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5(Min)
More informationDescription. Features. Application. Pin Assignment. Pin Description. Logic Function Table PI5A3158B
Low oltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More informationA W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY
DESCRIPTION The is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL
More informationMAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch
General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range
More informationNLAS4783B. Triple SPDT 1.0 R ON Switch
Triple SPDT 1.0 R ON Switch The NLAS4783B is a triple independent low R ON SPDT analog switch with ENABLE. This device is designed for low operating voltage, high current switching of speaker output for
More information