4703-TRM, 4705-TRM, 4706-TRM Allura Trim Series Operation & Maintenance Manual

Transcription

1 470-T, 4705-T, 4706-T llura Trim eries peration & aintenance anual odel umbers 470-T Valve Trim with and hower 4705-T hower Trim with and hower 4706-T Tub/hower Trim with and hower pecification Tub/shower trim with hand shower and lever handle includes wall connection, cradle for hand shower mounting, in-line vacuum breaker, flexible metal hose, non-diverter tub spout, mode hand shower and mode showerhead with standard.5 gpm (9.5 /min) flow restrictor. hower trim with hand shower and lever handle includes all of the above less non-diverter tub spout. Valve trim with hand shower and lever handle includes all of the above less non-diverter tub spout and mode showerhead. omponents made from metal and nonmetallic materials plated in standard polished chrome finish. ptions/odifications ompliance gpm (5.7 /min) flow restrictor gpm (7.6 /min) flow restrictor --V 0 slide bar in place of wall cradle on hand shower units - etal finish insert handle - ever handle - lip spout on any tub and shower unit -T atin ickel finish -.8.; 5. arranty imited ifetime - to the original end purchaser in consumer/residential installations. 5 Years - for industrial/commercial installations. efer to for complete warranty information. ote: ppend appropriate -suffix to model number.

2 imensions easurements Ø /, 64 mm 6 /4, 7 mm /8, 54 mm ale / T thread must be recessed /4 from finished wall 6, 5 mm right or left ef. 77, 956 mm Ø 7, 78 mm Ø 5, 7 mm 0, 54 mm 4 /4, mm /, 64 mm ef., 8 mm (4706-T) ef. 4, 067 mm (470-T, 4705-T), 05 mm /8, 79 mm 4 /8, 05 mm / T 4, 0 mm ough-in /8 ± /, 60 mm ± mm 5 /, 40 mm loor otes: ) ll dimensions measured from nominal rough-in (see as reference). ) imensions subject to change without notice.

3 arts reakdown eplacement arts tem escription art umber T U n-line Vacuum -09 reaker all lbow -05 howerhead 4-4 hower rm 00 (flange included) lange 40 lug utton andle crew T-06 tar asher andle ome over T-9 * iverter scutcheon ounting crews ounting late T-46 T* all radle radle ardware radle ount iverter ome over ock ut ial ounting crews hower scutcheon -06 T-9/0- T- U and hower -4 V Tub pout ose with Vaccum reaker -04 otes: ) ppend -T to part number for atin ickel finish. ) ppend -.5 or -.0 to showerhead or hand shower for low flow. Tools equired for nstallation V djustable wrench llen wrench (/6 ) hillips head screwdriver *ote: pply a bead of silicone around the perimeter of the escutcheons after installing trim flush with wall. eave opening on bottom of escutcheon for weep hole. lumber tape ilicone

4 nstallation ote: or valve body installation, please see valve body manuals. ) nstall shower escutcheon (T) to shower valve (4000-Y). ecure with two screws (). nap dial () into shower escutcheon. T ) ttach diverter escutcheon () to plastic mounting plate (). 6) nstall diverter handle (4705-T and 4706-T only) and shower handle () to valves. ecure handle(s) with star washer () and screw (). ttach plug button () to handle(s). ote: Tabs should snap into place. 4) nstall diverter dome cover () to diverter valve and secure with lock nut (). ote: ogo on dial should be in the 6 o'clock position. ) ttach mounting plate () to diverter valve (4705-T and 4706-T only). ecure with two screws (). otes: andles should be facing the 6 o'clock position. 5) nstall shower dome cover () to shower valve by turning clockwise 7) nstall tub spout (V) to pipe fitting. Turn clockwise to secure. T V 4

5 nstallation 8) nstall wall elbow () to pipe fitting. Tighten set screw to secure. 0) emove cover of wall cradle (). nstall cradle mount (). ecure with three screws (). eplace cover on hand shower cradle. ) nstall showerhead () to shower arm () turning clockwise to tighten. 9) lace cradle mount () in position, mark and drill /8" pilot holes into stud. 4 ) ttach large end of hand shower hose () to hand shower (U). onnect in-line vacuum breaker to wall elbow (). Turn clockwise to tighten. U ption: lace cradle mount () in position, mark and drill /6" holes into wall. nstall anchors. ) ttach shower arm () and flange () to vertical shower pipe turning clockwise to tighten. 4 5

6 peration & aintenance Temperature ontrol ) Turn shower handle counterclockwise approximately /4 turn to put valve in cold position. iverter ontrol ) iverter handle facing straight down is for diverter function. ) Turn shower handle counterclockwise approximately / turn to put valve in warm position. ) 4705-T: Turn diverter handle counterclockwise one full revolution for diverter function T: Turn diverter handle counterclockwise /4 turn for diverter function T 4706-T ) Turn shower handle counterclockwise approximately /4 turn to put valve in hot position. ) 4706-T: Turn diverter handle counterclockwise /4 turn for diverter function. inish is spotting. Troubleshooting hart lements in water supply may cause water staining on finish. lean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse with water. ymmons ndustries, nc. rooks rive raintree, 084 hone: (800) ax: (800) ymmons ndustries, nc. gethelp@symmons.com ZV-06 V 005