Assembly Instruction Item No. : HF SKU No. : Description: 48IN CHERRY CORNER FIREPLACE

Size: px

Start display at page:

Download "Assembly Instruction Item No. : HF SKU No. : Description: 48IN CHERRY CORNER FIREPLACE"

Leo Walton
5 years ago
Views:

1 ssembly Instruction Item No. : H SKU No. : Description: 48IN HRRY ORNR IRPL Option Option To prevent serious injury or death, this product is equipped with a wall anchoring system. efore this product can be used, the wall anchoring system must be installed as directed in the assembly instructions. lean with a dry soft rag. or spare parts, please contact Homestar ustomer are Tel: Mail: ustomer@homestarna.com Page 1 of 10

2 Tools Required ox (Not included) (Included) Screwdriver llen Key 16pcs 16pcs pcs D 9pcs 8pcs pcs Page 2 of 10

3 STP1 x4 2 Insert the wood dowel (part ) to the ouside hole of base panel (part 1) first. ttach side panels (part 2) and (part 3) to base panel (part 1) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. ully tighten all bolts in this step. x4 3 1 STP2 Slide the front panel as shown in the diagram. 4 1 Page 3 of 10

4 STP3 ttach front panel (part 4) to side panels (part 2) and (part 3) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. 2 ully tighten all bolts in this step. 4 3 x6 STP4 x Page 4 of 10 Insert the wood dowel (part ) to the ouside hole of side panel (part 2) and (part 3) first. ttach top panel (part 5) to side panels (part 2) and (part 3) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. ully tighten all bolts in this step.

5 STP5 Please refer to Insert manual to assembly the insert trims first as below on page -3. T U U STP6- Option : Using on flat wall ttach support foot (part 6) to base panel (part 1) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. ully tighten all bolts in this step. x1 1 6 Page 5 of 10 6

6 STP7- Please make sure the insert trims have been assembly first. Then carefully slide the firebox into the completed Mantel and center in the opening. Page 6 of 10

7 STP8- Securing the firebox to the mantel by using six Screws () as insert manual. INSTLLTION INSTRUTIONS: This Tip Restraint should be attached to a wall stud where possible. If Placement does not align with a wall stud, the plastic wall anchor must be used. 1. Using the 5/8 screw provided, attach the bracket to the top wood panel of the mantel inserting the screw through the smaller hole in the bracket. ully tighten the screw. 2. Place the fireplace mantel in the desired location and mark the location of the installed bracket on the wall. Remove the mantel. 3. Locate a spot about 2 below the mark made for the first bracket. Secure the second bracket to the wall with the 2 screw provided. If the screw hits a wall stud then fully tighten the screw and the plastic anchor does not need to be used. If no wall stud is located, remove the screw and insert the plastic wall anchor. ttach the bracket to the plastic wall anchor and fully tighten the screw. 4. Replace the mantel back into the desired location. The brackets should be aligned vertically. 5. Lace the end of the restraint strap trough the larger hole in each bracket. ring the ends of the strap together and slide the flat end of the restraint strap through the locking end and draw it through until all slack is removed. 6. onfirm the strap is securely laced and locked. Page 7 of 10

8 Option : Using on corner wall STP6- Please make sure the insert trims have been assembly first. Then carefully slide the firebox into the completed Mantel and center in the opening. STP7- Securing the firebox to the mantel by using six screws () as insert manual. x1 7 Page 8 of 10 ttach support panel (part 7) to base panel (part 1) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. ully tighten all bolts in this step. or corner using, please do not assemble the support foot (part 6). nd take care to keep the support foot for future flat wall use.

9 STP8- x1 8 ttach support panel (part 7) to top triangle panel (part 8) using bolts (part ), spring washer (part ) and flat washer (part ) by llen Key as shown in the diagram. ully tighten all bolts in this step. 7 STP9- x3 D 8 Page 9 of 10 ttach top panel (part 5) to top triangle panel (part 8) using screw (part D) by screwdriver as shown in the diagram.

10 STP10-8 INSTLLTION INSTRUTIONS: This Tip Restraint should be attached to a wall stud where possible. If Placement does not align with a wall stud, the plastic wall anchor must be used. 1. Using the 5/8 screw provided, attach the bracket to the top wood panel of the mantel inserting the screw through the smaller hole in the bracket. ully tighten the screw. 2. Place the fireplace mantel in the desired location and mark the location of the installed bracket on the wall. Remove the mantel. 3. Locate a spot about 2 below the mark made for the first bracket. Secure the second bracket to the wall with the 2 screw provided. If the screw hits a wall stud then fully tighten the screw and the plastic anchor does not need to be used. If no wall stud is located, remove the screw and insert the plastic wall anchor. ttach the bracket to the plastic wall anchor and fully tighten the screw. 4. Replace the mantel back into the desired location. The brackets should be aligned vertically. 5. Lace the end of the restraint strap trough the larger hole in each bracket. ring the ends of the strap together and slide the flat end of the restraint strap through the locking end and draw it through until all slack is removed. 6. onfirm the strap is securely laced and locked. Page 10 of 10

Brooklyn Drawers Assembly Instructions

Brooklyn Drawers Assembly Instructions rooklyn rawers ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. locking nut x30 long screw dowel bolt x16 x46 x30 F G H W Safety Strap X Wall