Item Name: Carlisle Mini Hall Tree SKU: DIME For assistance with assembly, please contact Hayneedle Customer Care Center /12

Size: px

Start display at page:

Download "Item Name: Carlisle Mini Hall Tree SKU: DIME For assistance with assembly, please contact Hayneedle Customer Care Center /12"

Rudolf Lee
5 years ago
Views:

1 Item Name: arlisle Mini Hall Tree SU: IM039- For assistance with assembly, please contact Hayneedle ustomer are enter /2

2 PR-ASSMY PRPARATION:! WARNING: Failure to follow these directions and warnings can result in serious injury and/or product damage. Please check that all parts and hardware are included before beginning assembly. Save all packing material until assembly is complete to avoid accidentally discarding smaller parts or hardware. Read through the preparation and assembly instructions in full before beginning assembly. Please use AUTION AN AR WHN IFTING the product. Assistance is required for assembly. The following additional tools are required for assembly: Phillips head screw driver; Optional Tools - rill/river, 3/32 rill it, /4 rill it, Pencil Never stand on the item or use it as a ladder. Periodically re-tighten all exposed hardware. If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts. PARTS IST Part rawing Part Name Qty. Part rawing Part Name Qty. A ench Seat G ottom ack ench eft Side H ench Front ench Right Side I ench ack Top Shelf J ench ottom Top ack am Screw 22 F orbel rackets 4 am ock 22 2/2

3 PR-ASSMY PRPARATION:! WARNING: Failure to follow these directions and warnings can result in serious injury and/or product damage. Please check that all parts and hardware are included before beginning assembly. Save all packing material until assembly is complete to avoid accidentally discarding smaller parts or hardware. Read through the preparation and assembly instructions in full before beginning assembly. Please use AUTION AN AR WHN IFTING the product. Assistance is required for assembly. The following additional tools are required for assembly: Phillips head screw driver; Optional Tools - rill/river, 3/32 rill it, /4 rill it, Pencil Never stand on the item or use it as a ladder. Periodically re-tighten all exposed hardware. If any parts become missing, damaged or worn, discontinue use until they are replaced with identical parts. PARTS IST Part rawing Part Name Qty. Part rawing Part Name Qty. M owel T olt with Washer 2 N ong olt 0 U Short olt 4 O Plug Nut 2 V umper 2 P Allen Wrench W Hinge 2 Q Hook 2 X Safety Hinge R Screw 20 Y No-tip it S Round Screw 4 3/2

4 AM O INSTRUTION This product is assembled with a cam lock set PAN I AM O HO AM O STP : Insert am ock into the cam lock hole of I. am lock +/- sign should be pointing towards the cam screw insertion hole. STP 2: Insert the cam screw into II. STP 3: onnect I and II by inserting the cam screw through the hole to which the cam lock arrow is pointing. PAN II AM SRW STP 4: Press I and II together. STP 5: ock s together by turning cam lock clockwise using a screwdriver. The cam lock and cam screw should make a click sound, indicating they are locked together. PUG NUT INSTRUTION This product is assembled with plug nuts OT PAN II STP : Insert Plug Nut into the plug nut hole of I with the Phillips head facing outward. STP 2: Align the threaded hole in the Plug Nut with the olt using a Phillips head screw driver. PUG NUT PUG NUT HO PAN I STP 3: onnect I and II by inserting the olt through the hole and into the threaded hole in the Plug Nut. STP 4: Secure s together by turning the olts clockwise using a Allen Wrench until the olt is fully tightened and the s are fully seated together. 4/2

5 STP-Y-STP ASSMY: Step - egin by assembling the ench: ay I with the bolt holes facing upwards. Insert and tighten three am Screws () into the bolt holes as shown below. Attach Part J to Part I: Align and insert the bolt holes on the edge of J with the installed am Screws on I. Insert and tighten three am ocks () into the holes on the back of J. J I I Step 2 - ay Parts and with the bolt holes facing up. Insert and tighten four am Screws () into the bolt holes on each panel. o not over tighten the am Screws. 5/2

6 STP-Y-STP ASSMY: Step 3 - Attach side panels to Parts I and J: ay Parts I and J down with J facing up as shown below. Insert the am Screws attached to Parts and into the holes on Parts I and J. Insert and tighten eight am ocks () into the bolt holes on Parts I and J. J Step 4 - ay the ench Front (H) with the bolt holes facing up. Insert and tighten six am Screws into the bolt holes as shown in the picture below. Attach Front ench : ay the ench on the ack. Insert the am Screws on H into the corresponding holes in the Side and ottom s as shown below. Insert and tighten six am ocks () into the bolt holes on the Side and ottom s. H H 6/2

7 STP-Y-STP ASSMY: Step 5 - Assemble Hall Tree ack: Insert eight ong Screws (N) through the bolt holes in the Top ack () and into the orbel rackets (F). Tighten N by using the Allen Wrench (P). P N F F N F Step 6 - Insert two Plug Nuts (O) into the bolt holes on the back of the Top ack () as shown below. Install two ong olts (N) and two Short olts (U) through the holes in the ottom ack (G) and into the Plug Nuts and orbel rackets (F) as shown below. Tighten N and U using the Allen Wrench (P). O F G U N P 7/2

8 STP-Y-STP ASSMY: Step 7 - Insert and tighten four am Screws into the bottom of G as shown below. F G Step 8 - Insert two am Screws () and one owel (M) into the bottom of the Top Shelf (). Insert two Short olts (U) through the Top of and into the orbel rackets (F) and tighten using the Allen Wrench (P). Insert and tighten two am ocks () into the bolt holes on the back of. U P U M G 8/2

9 STP-Y-STP ASSMY: Step 9 - With assistance, carefully align and insert the am Screws on the bottom of the Hall Tree ack with the bolt holes on the Hall Tree ench. Insert and tighten four am ocks () into the bolt holes in Parts and. Insert two olts with Washers (T) through the underside of the tabs on I and into the bolt holes on the underside of G. Tighten the bolts using the Allen Wrench (P). G T P I H 9/2

10 STP-Y-STP ASSMY: Step 0 - ay the ench Seat (A) with the screw holes facing upwards. Align the screw holes on the two Hinges (W) with the screws holes on A. Insert and tighten four Screws (R) through each Hinge and into A as shown below. Step - Turn the Seat right side up and align the screw holes in the hinges with the screw holes in the bottom of the ench Seat (A). Insert and tighten four Screws through each Hinge and into G. Align the screw holes on the Safety Hinge (X) with the screw holes on A. Insert and tighten two Round Screws (S) through the screw holes on X and into the screw holes on A. arefully, align the screw holes on the bottom of the Safety Hinge with the screw holes on the inside of Part. Insert and tighten two Round Screws (S) through the screw holes in the Safety Hinge and into the screw holes on A. astly, install a umper (V) on each corner of the Hall Tree as shown below. A X S R V A H R W 0/2

11 STP-Y-STP ASSMY: Step 2 - Align the screw holes in the Hooks (Part Q) with the screw holes in as shown below. Insert and tighten two Screws (R) through the screw holes in each Hook and into the screw holes in. Q R G A H /2

12 ANTI-TIP RSTRAINT ASSMY INSTRUTION ASSMY: Anti-tip Restraint is RQUIR in order to complete construction of this product. When properly installed, this hardware can provide protection against the unexpected tipping of furniture. ANTI-TIP RSTRAINT PARTS IST: Parts descriptions Parts image QTY A Nylon Strap A ong Screw Plastic Screw Anchor Wall rackets 2 Short Screw ASSMY INSTRUTIONS: Step : Attach one of the mounting brackets and secure to the back top edge of the furniture using the short screw. Step 2: Mark the location on the wall for mounting the second bracket. reate the appropriate sized hole in the wall and insert the plastic screw anchor. Secure the bracket to the wall using the long screw. Step 3: Place the furniture so the bracket on the back edge of the unit is in line with the bracket on the wall. Step 4: ace an end of the nylon restraint strap A down through each bracket. ring both ends together and slide the beaded end of the strap through the keyhole-shaped slot on the other end. Pull down on the beaded end until it snap-locks into the keyhole. Step 5: heck to make sure the strap is securely laced and locked to the brackets. 2/2

13 For assistance with assembly, please contact customer service

WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND

SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE