FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions

Transcription

1 FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service service@seidal.com PO#: Page1

2 Manchester Fireplace Console Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.. 1. Quantity 2. Quantity 3. Quantity Top Panel 4. Quantity Left Upper Side Panel 5. Quantity Upper Middle Panel 6. Quantity Right Upper Side Panel 7. Quantity Fixed Shelf Panel 8. Quantity Lower Left Side Frame 9. Quantity Lower Right Side Frame 10. Quantity Lower Middle Panel 11. Quantity Vertical Panel 12. Quantity Cross Panel Adjustable Shelf Panel Door Page 2

3 13. Quantity 14. Quantity 15. Quantity Bottom Panel 16. Quantity Support Rail 17. Quantity Center Leg 18. Quantity Wood Block 19. Quantity Large Drawer Front 20. Quantity Left Drawer Side Panel 21. Quantity Right Drawer Side Panel 22. Quantity Large Drawer Back 23. Quantity Large Drawer Bottom Panel 24. Quantity Drawer Bottom Rail 25. Quantity Small Drawer Front 26. Quantity Small Drawer Back 27. Quantity Small Drawer Bottom Panel Left Upper Back Panel Page 3 Right Upper Back Panel

4 28. Quantity Lower Back Panel A. Quantity of 32 B. Quantity of 34 C. Quantity of 34 Wood Dowel Dia 8 x 30mm D. Quantity 6 Cam Bolt E. Quantity of 4 Cam Lock F. Quantity 4 Screw Dia1/8 x1 L G. Quantity Ball Bearing Slide H. Quantity Screw Dia1/8 x1/2 L (For Ball bearing slide) I. Quantity Magnet J. Quantity of 4 Magnet Plate K. Quantity Screw (For Magnet ) Dia1/8 x5/8 L L. Quantity 5 Shelf Pin Hinge Screw Dia1/8 x3/4 L Page 4

5 M. Quantity N. Quantity O. Quantity of 6 Drawer Handle P. Quantity of 30 Door Handle Q. Quantity Bolt Dia 5/32 x5/8 L R. Quantity of 8 Screw (For back panel) Dia1/8 x1/2 L S. Quantity of 4 Firebox (in separate carton) T. Quantity Screw Dia1/8 x1-1/4 L U. Quantity of 4 Bracket V. Quantity of 4 Plastic Strap W. Quantity of 4 Anchor Screw Dia1/8 x5/8 L Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Screw Assembly Tool Required No.2 Phillips Screwdriver (Not Included) Dia1/8 x1-3/8 L For replacement parts or questions, please call customer service at Page 5

6 Manchester Fireplace Console Assembly Instructions Use screws (D) and wood dowels (A) to attach cross panel (10) to vertical panel (9). Tighten screws (R) with Phillips screwdriver. Figure 1 Insert cam locks (C) into holes on assembled unit. Screw cam bolts (B) into holes on lower middle panel (8). Attach assembled unit to lower middle panel (8) by inserting wood dowels (A) and cam bolts (B) into corresponding holes until lower middle panel (8) and assembled unit meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 2 Page 6

7 Use screws (R) and wood dowels (A) to connect support rails (14) to bottom panel (13). Tighten screws (R) with Phillips screwdriver. Figure 3 Insert cam locks (C) into holes on assembled unit. Screw cam bolts (B) into holes on bottom panel (13). Attach assembled unit to bottom panel (13) by inserting wood dowels (A) and cam bolts (B) into corresponding holes until bottom panel (13) and assembled unit meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 4 Page 7

8 Insert cam locks (C) into holes on the bottom of assembled unit. Screw cam bolts (B) into holes on lower left side frame (6) and lower right side frame (7). Attach lower left side frame (6) and lower right side frame(7) to assembled unit by inserting wood dowels (A) and cam bolts (B) into corresponding holes until assembled unit, lower left side frame (6), and lower right side frame (7) meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 5 Insert cam locks (C) into holes on assembled unit. Screw cam bolts (B) into holes on underside of fixed shelf panel (5). Attach fixed shelf panel (5) to assembled unit by inserting wood dowels (A) and cam bolts (B) into corresponding holes until fixed shelf panel (5) and assembled unit meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 6 Page 8

9 Attach center leg (17) to assembled unit by hand. Figure 7 Disassemble metal slides into male slide and female slide as shown. Note: There is a lever located on the male slide. Push the lever to the either side in order to detach the male slide from the female slide. Figure 8 Page 9

10 Attach female ball bearing slides (E) to left upper side panel (2) with wood screws (F). Make sure the front of the slide is facing towards the front as shown. Tighten screws (F) with Phillips screwdriver. Note: When attaching the female slides, make sure to insert wood screws through the first opening starting from the front, then align the openings to the pre-drilled holes on the panels. Repeat with upper middle panel (3) and right upper side panel (4) as shown. Figure 9 Insert cam locks (C) into holes on left upper side panel (2), upper middle panel (3), and right upper side panel (4). Screw cam bolts (B) into holes on assembled unit. Attach left upper side panel (2), upper middle panel (3), and right upper side panel (4) to assembled unit by inserting wood dowels (A) and cam bolts (B) into corresponding holes until left upper side panel (2), upper middle panel (3), right upper side panel (4), and assembled unit meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 10 Page 10

11 Insert cam locks (C) into holes on assembled unit. Screw cam bolts (B) into holes on top panel (1). Attach top panel (1) to assembled unit by inserting wood dowels (A) and cam bolts (B) into corresponding holes until top panel (1) and assembled unit meet. Tighten by rotating cam locks (C) clockwise with Phillips screwdriver. Figure 11 Attach the left upper back panel (26), right upper back panel (27), and lower back panel (28) on the assembled unit with screws (P). Tighten with Phillips screwdriver. Figure 12 Page 11

12 Assemble the door (12) onto the assembled unit using hinges (K) and screws (L). Tighten screws (L) with a Phillips screwdriver. Attach the magnet (G) on the assembled unit using screw (I). Attach the metal plate (H) on the inner inside of the door frame using screws (L) Attach the door handle (N) on the door using bolt (O). Figure 13 Insert shelf pins (J) into holes on lower right side frame and lower midde panel. Insert shelf (11) in the arrows direction. Make sure the shelf pin (J) stably holds the shelf (11). Figure 14 Page 12

13 Attach drawer side panels (18), (19), and drawer back panel (24) and tighten using screws (D). Insert drawer bottom panel (25) into the grooves of panels (18), (19), and (24). Attach small drawer front panel (23) to the assembled drawer using screws (D). Finally attach the drawer handle (M) on the drawer front using bolts (O). Figure 15 Attach male metal slide(e) to drawer sides with wood screws (F). Make sure the open end of the slide is facing towards the back of the drawer in order to attach to the female slide. Tighten screws with a phillips screwdriver. Figure 16 Page 13

14 Insert cam locks (C) into holes on drawer bottom rail (22). Screw cam bolts (B) into holes on large drawer back (20). Attach large drawer back (20) to drawer bottom rail (22) by inserting cam bolt (B) into corresponding hole until large drawer back (20) and drawer bottom rail (22) meet. Tighten by rotating cam lock (C) clockwise with Phillips screwdriver. Attach the left drawer side panel (18) and right drawer side panel (19) to drawer back (20), make sure the grooves match and tighten them using screws (D). Figure 17 Insert the large drawer bottom (21) into the corresponding grooves of drawer back (20), left drawer side (18), and right drawer side (19). Attach drawer front panel (17) to the front of the drawer using screws (D). Attach the drawer handle (M) on the drawer front using bolts (O) as shown. Page 14

15 Attach male metal slides (E) to drawer sides with wood screw (F). Tighten screws with a Phillips screwdriver. Figure 18 Insert drawers into assembled unit. Make sure drawer s male ball bearing slides are carefully inserted into side panel s female ball bearing slide. Make sure ball bearing slides glide smoothly in and out. Figure 19 Page 15

16 Carefully insert the firebox (Q) into the cabinet to avoid scratching. Figure 20 Use screws (R) to connect wood blocks (16) to support rails. Tighten screws (R) with Philips screwdriver. Figure 21 Page 16

17 Attach brackets (S) to back panel using screws (V). Tighten screws (V) using Philips screwdriver. Mark two desired locations on the wall and drill two 3/16" holes. Insert plastic anchors (U) into the two holes on wall as shown. Use a hammer to insert the plastic anchors until they are flush with the wall. Then attach the brackets (S) onto the wall using screws (W). Tighten screws (W) using Philips screwdriver. Figure 22 Move this item close to the wall brackets (S) and tie in all brackets (S) together with plastic strap (T) as shown in diagram. Anti-tipping hardware must be used for this product to avoid tipping and injury. Figure 23 Page 17

18 Now you Manchester fireplace console is ready for use. Figure 24

19 Parts Replacement Form Page11 Page 4 Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at or in Dallas / 9am 4pm Mon-Fri Central time if you have product issues or us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. Customer Service service@seidal.com Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas 75019