Admas A500. Specification:

Size: px
Start display at page:

Download "Admas A500. Specification:"

Transcription

1 Admas A500 Specification: Length :07 mm(8.7") Wing Span :00 mm(9.5") Wing Area :8.8 sq. dm 5.5 sq. ft Wing Loading :3 g/sq. dm 53.7 oz/sq. ft Flying Weight :8 kg(7.lbs) Radio :ch &3 servos Engine : -cycle 9 -cycle

2 3 channel radio for aiplane is highly recommended for this model. -cycle.9 9 Optional parts:rubber wheel with metal hub, oleo struts and retracts system. 3 in Spinner

3 3 Epoxy wooden blocks to appropiate position Mount pin hinges to wooden blocks. Servo tray Securely glue together. If coming off during flighs, you 'll lose control of your airplane which leads to accidents! Epoxy pin hings to flap steadily. Install the servo. Make sure hinges are mounted in the same line. Leave some space with width of mm between trailing edge and flap. 5 Install the nylon control horn and connect the linkage. Trailing edge Flap mm Sand wooden block properly to make it fit pin hinge position. Rod (x300mm) Horn

4 8 Epoxy rudder steadily in position. Mount plastic tube for guiding pushrod. Horn Plate Rod (x300mm) TP Screw (.3xmm) Screw (x35mm) Screw (x5mm) Steel wire (0.5x500mm) Plastic tube(3x50mm) 8 3mm 0mm 80mm Plastic tube(3x50mm) Secure the servo. Install the nylon control horn and connect the linkage. 9 Rudder.Connect the linkage rod to the horn. Aluminum tube Steel wire Copper joiner TP Screw (.3xmm) Horn Screw (x35mm) mm mm Screw (x5mm) Nut (mm) 7 Epoxy pin hinges to rudder. 0 Install the rudderservo. Make sure hinges are mounted in the same line. Copper joiner Aluminum tube(3xmm)

5 3 Cut out a hole as shown on the bottom cover of main fuselage beforehead.mount the bottom cover with self-tapping screws. Copper joiner Aluminum tube(3xmm) TP Screw (.3x8mm) TP Screw (.xmm) Main wing joiner(0x30mm) 8.5mm TP Screw (.3x8mm) Assemble the servos in the fuselage. Install the middle wing. Rudder servo B B" A = A" B = B".5mm Copper joiner A A" Aluminum tube(3xmm) Secure the air retracts gear with typer screw. 5 Epoxy the side fuselage to the middle wing part steadily. Main wing joiner(0x30mm).5mm TP Screw (.xmm) 8 Insert servo leads and air lines through mid wing to side fuselage. 3

6 8 Install the servo. Servo tray Horn Plate Rod (x300mm) TP Screw (.3xmm) Screw (x5mm) Epoxy pin hings to stab steadily. 9 Install the nylon control horn and connect the linkage. Rod (x300mm) Horn Make sure hinges are mounted in the same line. 7 Epoxy wooden blocks to appropiate position Mount pin hinges to wooden blocks. 0 Secure the servo. Install the nylon control horn and connect the linkage. TP Screw (.3xmm) Screw (x5mm) Securely glue together. If coming off during flighs, you 'll lose control of your airplane which leads to accidents! TP Screw (.3xmm )

7 3 Leave some space with width of mm between trailing edge and aileron. Servo tray Trailing edge mm Aileron Sand wooden block properly to make it fit pin hinge position. Screw (xmm) Washer(xmm) Attach stabilizer with vertical fin. Epoxy wooden blocks to appropiate position mount pin hinges to wooden blocks. Washer(x8mm) Screw (xmm) Washer(xmm) Screw (xmm) Securely glue together. If coming off during flighs, you 'll lose control of your airplane which leads to accidents! Securely glue together. If coming off during flighs, you 'll lose control of your airplane which leads to accidents! Epoxy pin hings to aileron steadily. 5 Install the servo. Make sure hinges are mounted in the same line. 5

8 8 Epoxy pin hinges to flap. Servo tray Horn Plate Rod (x300mm) TP Screw (.3xmm) Screw (x35mm) 8 Make sure hinges are mounted in the same line. Install the nylon control horn and connect the linkage. 9 Epoxy flap to trailing edge. Rod (x300mm) Horn Securely glue together. If coming off during flighs, you 'll lose control of your airplane which leads to accidents! 7 Secure the servo. Install the nylon control horn and connect the linkage. 30 Install the servo. Screw (x35mm) TP Screw (.3xmm) mm

9 33 Drill dowel hole according to rib tenplate. Horn Plate Rod (x300mm) TP Screw (.3xmm) 8 Screw (x35mm) Wood dowel (x50mm) Rib template (3mm ply) mm Rib template (3mm ply) Rib template (3mm ply) 3 Install the nylon control horn and connect the linkage. 3 Epoxy the dowel on the wing. Rod (x300mm) Horn Wood dowel (x50mm) 3 Secure the servo. Install the nylon control horn and connect the linkage. 35 Install the main wing. TP Screw (.3xmm) C C = C" C" Screw (x35mm) mm D = D" D" 7

10 38 Epoxy the dowel on the leading edge of wing. Wood dowel (x50mm) Screw (3x0mm) 0 mm 0 mm Washer(3x8mm) Rib template (3mm ply) Screw(x50mm) Blind Nut (mm) Main wing joiner (0x0mm) Wood dowel (x50mm) mm 3 Attach wing to fuselage firstly:mount screw into thread hole drilled through wing tube. 39 Drill holes in the fuselage to install the main wing. 0 mm 0 mm Rib template (3mm ply) mm Rib template (3mm ply) mm Main wing joiner (0x0mm) 37 Fasten the main wing with the rubber band. 0 Mount the main wing on the fuselage. Screw (3x5mm) Washer(3x8mm).mm.mm 0 mm Use tap to make 3x0mm hole astraight through wing thge Screw(x50mm) Blind Nut (mm) 8

11 3 Drill four holes at the diameters as shown for engine mount. Blind Nut (mm) 5.mm Blind Nut Blind Nut (mm) Assemble the front engine. Assemble the engine. Screw (x35mm) Washer (x8mm) mm Washer (x8mm) In case of -cycle & -cycle engine. Washer (x8mm) Spring Washer (mm) Nut (mm) Screw (x5mm) Assemble the engine. 5 Assemble the front engine. Set Screw (3xmm) Linkage Stopper 3 mm Rod (x00mm) Washer (mm) Washer (x8mm) Set Screw (mm) Set Screw (3xmm) Screw (x5mm) Set Screw (mm) Blind Nut (mm) Rod (x850mm) 9

12 8 Mount the fuel tank into the fuselage. Screw (x35mm) Screw (x5mm) Washer(x8mm) Spring Washer (mm) Nut (mm) Linkage Stopper Plastic tube (x850mm) Engine mount (0 size) Fuel tank (8cc) Blind Nut (mm) Fuel tank (8cc) Install the front engine. 9 Assemble the rear engine. In case of -cycle & -cycle engine. 7 Assembly of the fuel tank. 50 Assemble the rear engine. 3mm Air pressure line Fuel spray line Fuel supply line 0

13 Screw (x35mm) Screw (x5mm) Washer(x8mm) Spring Washer (mm) Nut (mm) Linkage Stopper TP Screw (.3x8mm) 5 Plastic tube (x50mm) Engine mount (8x05mm) Fuel tank (8cc) 53 Assemble the engine. Set Screw (3xmm) Rod (x00mm) Set Screw (mm) Linkage Stopper Washer (mm) Washer (x8mm) Set Screw (mm) Set Screw (3xmm) Screw (x5mm) Blind Nut (mm) Rod (x50mm) 5 Drill four holes at the diameters as shown for engine mount. 5 Install the engine. 5.mm Blind Nut Blind Nut (mm) 5 Assemble the engine. 55 Assembly of the fuel tank. Screw (x35mm) Washer (x8mm) mm Washer (x8mm) Washer (x8mm) Spring Washer (mm) Nut (mm) Screw (x5mm) Air pressure line Fuel spray line Fuel supply line

14 58 Secure nose retract. Copper joiner Aluminum tube(3xmm) TP Screw (.xmm) Steel wire (0.5x00mm).5mm TP Screw (.xmm) 5 Mount the fuel tank into the fuselage. 59 Connect the steel wire linkage to the arm as shown. Fuel tank (80ml) Steel wire (0.5x00mm) 57 Mount wheel on the landing gear. 0 Connect the steel wire linkage to the arm as shown. Aluminum tube Copper joiner Wheel Screw Steel wire Copper joiner Aluminum tube(3xmm)

15 3 Trim the rear cowling for engine and muffler. TP Screw (.3x8mm) Trim the front cowling for engine and muffler. Assemble the rear cowling..5mm TP Screw (.3x8mm) 5 Assemble the front cowling. 5 Install the nylon control ring for switch and connect the linkage..5mm.5mm TP Screw (.3x8mm) 7 Ring Rod (X300mm) 3

16 8 Assemble the servos and switch in the fuselage. Rod (X300mm) Screw (x5mm) Aluminum Washer (mm ) Nut (mm ) Air tank Switch Air inlet Linkage Stopper Ring 3 Air line (800mm) PVC Part PVC Part PVC Part PVC Part PVC Part Aluminum tube Steel wire Copper joiner Air tank Switch Throttle servo Throttle servo Tail wheel Assemble the servos and switch in the fuselage. 9 Cut away the surplus parts of windows carefully along the shaded line. Set screw (3xmm) Washer (mm) Washer (mm) Linkage Stopper Washer (mm) Nut (mm) Set screw (3xmm) 7 Mounting of the receiver and the battery. 70 Fix the windows with self - tapping screws.

17 7 Centre of Gravity. 73 Adjustment. Side View AILERON FLAP 5mm 5mm 7mm 30mm AILERON FLAP 7 Adjustment. 7 Adjustment. ELEVATOR Side View Side View 5mm 5mm Top view RUDDER 0mm 0mm Position for right diagram. Top view 5

18 Three wheel retract system Make sure to assemble retracts as instructed below. Strut Strut 3-way pressure inlet Air inlet Air tank Air valve Air valve 3-way pressure inlet Switch Push plug to the far end to make gear down Pul pull out length of mm to make gear up Screw (x5mm) Nut (mm) Brass collar (5mm) Nut (5mm) Brass collar (5mm) Nut (5mm) Brass collar (5mm) Wheel Brass collar (5mm) Wheel Nose arm Set Screw (3xmm) Collar 5mm Set Screw 3xmm

Hawker hurricane MK.IIa

Hawker hurricane MK.IIa Hawker hurricane MK.IIa Specification: Length :00 mm(") Wing Span :00 mm(") Wing Area :0. sq. dm.9 sq. ft Wing Loading :.9 g/sq. dm 5.9 oz/sq. ft Flying Weight :.kg(5 lbs) Radio :ch& servos Engine :0 INSTRUCTION

More information

T-28 Trojah INSTRUCTION MANUAL SAFETY PRECAUTIONS

T-28 Trojah INSTRUCTION MANUAL SAFETY PRECAUTIONS T- Trojah Specification: Length :3 mm(3.5") Wing Span :057 mm(") Wing Area :70. sq. dm 7.55 sq. ft Wing Loading :7 g/sq. dm 39.5 oz/sq. ft Flying Weight :. kg( lbs) Radio :ch & servos Engine :0 -cycle

More information

B-25 Mitchell INSTRUCTION MANUAL SAFETY PRECAUTIONS

B-25 Mitchell INSTRUCTION MANUAL SAFETY PRECAUTIONS B-5 Mitchell Specification: Length :935 mm(76.") Wing Span :0 mm(95") Wing Area :77.6 sq. dm 7./sq.ft Wing Loading : g/sq. dm oz/sq. ft Flying Weight :0 kg(. lbs) Radio :6ch&3 servos Engine(a pair) :9

More information

Focke-Wulf Fw 190 RUDDER

Focke-Wulf Fw 190 RUDDER 7 Adjustment. 7 The centre of the Gravity. Side View Focke-Wulf Fw 90 RUDDER Top view 0mm 0mm 0mm Two wheel retract system Make sure to assemble retracts as instructed below. -way pressure inlet Strut

More information

P-47D Thunderbolt. Two wheel retract system Make sure to assemble retracts as instructed below. 3-way pressure inlet INSTRUCTION MANUAL

P-47D Thunderbolt. Two wheel retract system Make sure to assemble retracts as instructed below. 3-way pressure inlet INSTRUCTION MANUAL 70 Adjustment. 7 The centre of the Gravity. Side View AILERON FLAP 0mm 0mm P-7D Thunderbolt AILERON FLAP 0mm 3mm Two wheel retract system Make sure to assemble retracts as instructed below. 3-way pressure

More information

Modellbau Lindinger GmbH Modellbau Lindinger GmbH

Modellbau Lindinger GmbH    Modellbau Lindinger GmbH 7 Adjustment. 7 Adjustment. AILERON 5mm 5mm RUDDER Robin 0 FLAP 0mm Top view 30mm 30mm Side View AILERON FLAP 73 Adjustment. ELEVATOR Side View 5mm 5mm Top view Position for right diagram. 7 Centre of

More information

Adrenaline. Specification: 5.5 sq. ft Wing Loading :82 g/sq. dm 26.9 oz/sq. ft Flying Weight :4.2 kg(9.3 lbs) :6ch&6 servos.

Adrenaline. Specification: 5.5 sq. ft Wing Loading :82 g/sq. dm 26.9 oz/sq. ft Flying Weight :4.2 kg(9.3 lbs) :6ch&6 servos. Adrenaline Specification: Length Wing Span Wing Area :70 mm(7") :70 mm(") :5. sq. dm 5.5 sq. ft Wing Loading : g/sq. dm.9 oz/sq. ft Flying Weight :. kg(9. lbs) Radio :ch& servos Engine :0 -cycle 0 -cycle

More information

JU-87D Stuka INSTRUCTION MANUAL SAFETY PRECAUTIONS

JU-87D Stuka INSTRUCTION MANUAL SAFETY PRECAUTIONS 73 Adjustment. 7 Centre of Gravity. Side View AILERON FLAP 0mm 0mm JU-7D Stuka 30mm Top View AILERON FLAP 35mm 75 The front view when the drop tank and the bombs install completion. Specification: Length

More information

Aichi D3A1 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Aichi D3A1 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Aichi D3A Specification: Length: 50mm(0. ) Wing span: 057mm( ) Wing area: 7.sq.dm(.sq.ft) Wing loading: 99.9g/sq.dm(3.oz/sq.ft) Flying weight: 7.kg(.7lbs) Radio: ch & 7servos Engine: 0 -cycle C.G: 35mm

More information

P-39 Airacobra INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: 30cc gasoline engine. This R/C airplane is not a toy!

P-39 Airacobra INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: 30cc gasoline engine. This R/C airplane is not a toy! P-39 Airacobra Specification: Length: Wing span: Wing area: Wing loading: Flying weight: Radio: Engine: 7mm(70. ) 00mm(0.3 ) 7.5sq.dm(.5sq.ft) 93g/sq.dm(30.5oz/sq.ft) 7.3kg(.bs) ch & servos 30cc gasoline

More information

SPITFIRE MK.XIV\XIX RUDDER

SPITFIRE MK.XIV\XIX RUDDER 70 Adjustment. 7 The centre of the Gravity. Side View SPITFIRE MK.XIV\XIX RUDDER Top view 0mm 0mm 0mm Two wheel retract system Make sure to assemble retracts as instructed below. -way pressure inlet Strut

More information

F - 4u Corsair (50cc)

F - 4u Corsair (50cc) F - u Corsair (50cc) Specification: Length: 73(.3") Wing span: 0mm(5") Wing area: 7.00sq.dm(9.39sq.ft) Wing loading: 35.g/sq.dm(.5oz/sq.ft) Flying weight:.kg(.0lbs) Radio: ch & 0servos Engine: 50cc gasoline

More information

F - 4u Corsair INSTRUCTION MANUAL SAFETY PRECAUTIONS. Two wheel retract system. Specification:

F - 4u Corsair INSTRUCTION MANUAL SAFETY PRECAUTIONS. Two wheel retract system. Specification: Adjustment. 3 The centre of the Gravity. Never fly before checking CG s required position. In order to obtain the CG specified reposition the receiver and battery. ELEVATOR Top view F - u Corsair 0mm 0mm

More information

Pilatus PC-9 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Pilatus PC-9 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Pilatus PC-9 Specification: Length: Wing span: Wing area: Wing loading: Flying weight: Radio: Engine: 9mm(7 ) 0mm(0 ) sq.dm(.9sq.ft) 0.g/sq.dm(.9oz/sq.ft).kg(7.bs) ch & servos 0 -cycle 0cc gasoline engine

More information

Cessna 185 INSTRUCTION MANUAL SAFETY PRECAUTIONS

Cessna 185 INSTRUCTION MANUAL SAFETY PRECAUTIONS Cessna Specification: Length :0 mm(") Wing Span :00 mm(.") Wing Area :. sq. dm.9 sq. ft Wing Loading :7. g/sq. dm. oz/sq. ft Flying Weight :. kg(. lbs) Radio :ch&9 servos Engine :0 -cycle 0 -cycle INSTRUCTION

More information

Fw-190 D9(50cc) INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Fw-190 D9(50cc) INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Fw-90 D9(50cc) Specification: Length: 00mm(8.5 ) Wing span: 093mm(8.5 ) Wing area: 77.79sq.dm(8.sq.ft) Wing loading: g/sq.dm(0oz/sq.ft) Flying weight: 9.5kg(0.9 bs) Radio: ch & 8servos Engine: 50cc gasoline

More information

Cessna INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Cessna INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Cessna - 95 Specification: Length Wing Span Wing Area :00 mm(") :7 mm(07") :0sq.dm.9sq.ft Wing Loading :75g/sq.dm.oz/sq.ft Flying Weight :9kg(9.lbs) Radio Engine: :ch & servos :0cc-50cc INSTRUCTION MANUAL

More information

FOKKER D-VII INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

FOKKER D-VII INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: FOKKER D-VII Specification: Length Wing Span Wing Area :97 mm(55") :77 mm(70") :9sq.dm 9.sq.ft Wing Loading :59.g/sq.dm.9oz/sq.ft Flying Weight :.5kg(lbs) Radio Engine: :ch & 5servos :cc-cc INSTRUCTION

More information

Beaver INSTRUCTION MANUAL SAFETY PRECAUTIONS. 1.8mm. Specification:

Beaver INSTRUCTION MANUAL SAFETY PRECAUTIONS. 1.8mm. Specification: 9 Fix the aluminum bracket on the fuselage with screw. 95 The floats installation finished. Screw (x5mm) 9 Blind Nut (mm) 9 Washer (xmm) 9 Screw (x5mm) Beaver Damped nut (mm) Washer (xmm) Screw (x5mm)

More information

LTR-14 TURNER SPECIAL

LTR-14 TURNER SPECIAL LTR- TURNER SPECIAL Specification: Length Wing Span Wing Area :05 mm(8") : mm(95") :sq.dm sq.ft Wing Loading :0g/sq.dm 5.oz/sq.ft Flying Weight :kg(.lbs) Radio Engine: :ch & 8servos :80cc-00cc INSTRUCTION

More information

Spitfire Mk.IX ARF. Electric retract system. TopRCModel-USA.com

Spitfire Mk.IX ARF. Electric retract system. TopRCModel-USA.com Electric retract system Thank you very much for purchasing our TRCM optional electric retract set, all our products were passed strict QC before they shipped out to the customers. In order to avoid probably

More information

Zlin Z-526 AFS INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Zlin Z-526 AFS INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Zlin Z-5 AFS Specification: Length Wing Span Wing Area :75 mm(7.") :05 mm(") :7.sq.dm.9sq.ft Wing Loading :70.9g/sq.dm.oz/sq.ft Flying Weight :5.kg(.9lbs) Radio :ch & servos Engine: :cc-cc INSTRUCTION

More information

第 4 页. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron to the wing.

第 4 页. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron to the wing. TopRCModel-USA.com TopRCModel-USA.com TopRCModel-USA.com Accessory list for the installation of aileron and flap. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron

More information

105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0

105 TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0 105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0 Step 1. Installation of the aileron servos 1) Mount aileron servo to servo mounting blocks with servo s screws. Install servo mounting plate with screws.

More information

FUSELAGE CONSTRUCTION

FUSELAGE CONSTRUCTION FUSELAGE CONSTRUCTION Note: prior to building and gluing on the work surface use protective covering on your building surface. (wax paper or clear wrap) Fit the laser cut Fuselage Front and Fuselage Rear

More information

第 4 页, 共 17 页. 3. Epoxy the wood block to the servo tray base on the mark line. Accessory part lists for wing installation.

第 4 页, 共 17 页. 3. Epoxy the wood block to the servo tray base on the mark line. Accessory part lists for wing installation. 第 1 页, 共 17 页 第 2 页, 共 17 页 第 3 页, 共 17 页 Accessory part lists for wing installation. 3. Epoxy the wood block to the servo tray base on the mark line. 1. Ready for assemble the wing servos. 4. Epoxy the

More information

Skymaster ARF F-18E Instructions Manual

Skymaster ARF F-18E Instructions Manual Skymaster ARF F-18E Instructions Manual first: Take out the front servos mount, install front fuel tank before installing nose cone connect nose cone to fuselage by 6 screw Take out the 6 screws and Bottom

More information

AT channel 6 servos

AT channel 6 servos Wing Span: Wing Area: Fuselage Length: Flying weight: Power system: Radio: 60.7in/1540mm 561 sq in/36.3 sq dm 44.1in/1120mm 6.9 Ibs/ 3100g 46(2C0/71(4C) 5 channel 6 servos AT6-46 INSTALLING AILERONS Begin

More information

MECOA EZ-4061 Trainer

MECOA EZ-4061 Trainer MECOA EZ-4061 Trainer EZ-4061 is a newly designed, Almost Ready to Fly kit. It is an extremely easy to control trainer with strong construction and excellent aerodynamic performance. This is a great choice

More information

TIGER MOTH 120 ASSEMBLY INSTRUCTIONS

TIGER MOTH 120 ASSEMBLY INSTRUCTIONS TIGER MOTH 120 ASSEMBLY INSTRUCTIONS SPECIFICATIONS Wing Span: Length: Radio: Flying Weight: 1920mm 1580mm 4 channel with 6 servos 4200g AILERON ASSEMBLY 1 Start by removing the servo cover from the bottom

More information

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage.

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage. LANDING GEAR 1. Fit landing gear into slots on bottom of fuselage. 4. Use channel-lock pliers to press blind nuts into position (note: drilled hole should be slightly smaller than shaft of blind nut for

More information

Instruction Manual. Specification:

Instruction Manual. Specification: Instruction Manual H I G Specification: Wingspan: 133 cm (52.3 inches) Length : 104 cm (40.9 inches) Weight : 1830gr Engine : 25-32 two stroke Radio : 4 channel - 4 servo H W I N G KIT CONTENTS: We have

More information

Citabria Pro. Aerobatic Parkflyer. by Joel Dirnberger

Citabria Pro. Aerobatic Parkflyer. by Joel Dirnberger Citabria Pro Aerobatic Parkflyer by Joel Dirnberger Revision C: December 21, 2004 Citabria Pro Building Instructions Length: Wingspan: Wing Area: Flying Weight: Wing Loading: Functions: Specifications:

More information

Corvus Racer CC

Corvus Racer CC Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc

More information

INSTRUCTION MANUAL BOOK.

INSTRUCTION MANUAL BOOK. INSTRUCTION MANUAL BOOK. SPECIFICATION Wingspan : 164 cm 64.57in. Length : 135 cm 53.15 in. Weight : 3.3kg 7.26 lbs. Servo : 7 servos. Radio : 4 channels. Engine : 61 cu.in-2 stroke. 91 cu.in-4 stroke.

More information

MXS R 30CC. Item No:L G Specifications. 67 1/2"(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo.

MXS R 30CC. Item No:L G Specifications. 67 1/2(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo. MXS R 30CC Item No:L G030008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description Covering Material Carbon Fibre : 75"(1915mm) 67 1/2"(1720mm) 1023sq in(66sq

More information

C-180 Builder s Manual

C-180 Builder s Manual C-180 Builder s Manual. May 20, 2002 Last revised July 11, 2002 Copyright! 2002 Douglas Binder, Mountain Models www.mountainmodels.com sales@mountainmodels.com (719) 630-3186 1 Required Equipment! Xacto

More information

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300

More information

Edge 540 V3 35CC. Scheme A. Item No:L G Specifications. Flying Weight

Edge 540 V3 35CC.  Scheme A. Item No:L G Specifications. Flying Weight Edge 540 V3 35CC Item No:L G035016 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description 76 (1930mm) 74 (1879mm) 1200sq in(77.4sqdm) 9.9 12lbs(4.5 5.5kg) 91 1.20(2C)

More information

Specifications. Before commencing assembly, please read these instructions thoroughly.

Specifications. Before commencing assembly, please read these instructions thoroughly. INSTRUCTION MANUAL Before commencing assembly, please read these instructions thoroughly. Specifications Wing Span: 8.5 in / 30 mm Wing Area: 330 sq in /.3 sq dm Flying Weight: 6 oz / 70 g Fuselage Length:

More information

Instruction Manual book

Instruction Manual book Instruction Manual book ITEM CODE BH53. SPECIFICATION Wingspan : 1,250mm 49.21 in. Length : 930mm 36.61in. Weight : 1.1kg 2.42 Lbs. Parts listing required (not included). Battery: 3 CELLS-LI-POLY-11.1V-2,500

More information

RESolution V2 Manual

RESolution V2 Manual RESolution V2 Manual Note for the German Manual: Yellow Bottle thick CA Pink Bottle Med CA Blue tube 5 minute Epoxy Green tube 90 Minute Epoxy Construction of the Fuselage Step 1: Cover the plan with a

More information

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER #

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER # Extra 330LT 85-125CC Item No:A-G120001 Specs: WING SPAN: LENGTH: WING AREA: FLYING WEIGHT: ENGINE: RADIO: Description Covering Material Carbon Fibre: 111 (2833mm) 100" (2530mm) 2139sq in (138sq dm) 25.3-28lbs

More information

TWEETY 25 INSTRUCTION MANUAL. Almost Ready to Fly Nitro/Electric Aerobat FEATURES SPECIFICATIONS

TWEETY 25 INSTRUCTION MANUAL. Almost Ready to Fly Nitro/Electric Aerobat FEATURES SPECIFICATIONS TWEETY 25 Almost Ready to Fly Nitro/Electric Aerobat INSTRUCTION MANUAL SPECIFICATIONS FEATURES WINGSPAN: 45.7 (1160mm) LENGTH: 38.6 (980mm) WING AREA: 370 sq in(24 sq dm) FLYING WEIGHT: Approx. 3.3 lbs

More information

FUJI FA-200 AERO SUBARU

FUJI FA-200 AERO SUBARU FUJI FA-200 AERO SUBARU SEMI SCALE SPORT MODEL AERO SUBARU Assembly and Operations Manual Please review this manual throughly Before assembling or Operating The AERO SUBARU Semi scale sport model We ve

More information

30% Edge 540T Almost Ready to Fly

30% Edge 540T Almost Ready to Fly Lanier R/C 30% Edge 540T Almost Ready to Fly WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE This R/C kit and the model you will build from it is not a toy! It is capable of serious bodily

More information

VIPER 140 Manual. Release 1.0 January 2018

VIPER 140 Manual. Release 1.0 January 2018 VIPER 140 Manual Release 1.0 January 2018 Please read this user manual carefully, it contains instructions for the correct assembly of the model. Please refer to the web site www.harlock-rc.com for updates

More information

Specifications. Before commencing assembly, please read these instructions thoroughly. INSTRUCTION MANUAL

Specifications. Before commencing assembly, please read these instructions thoroughly. INSTRUCTION MANUAL INSTRUCTION MANUAL Before commencing assembly, please read these instructions thoroughly. Specifications Wing Span: 50 in / 170 mm Wing Area: 484 sq in / 31. sq dm Flying Weight: 3.5 lbs / 1600 g Fuselage

More information

RADIO CONTROL MODEL / RC FLUGMODELL INSTRUCTION MANUAL

RADIO CONTROL MODEL / RC FLUGMODELL INSTRUCTION MANUAL RADIO CONTROL MODEL / RC FLUGMODELL INSTRUCTION MANUAL SPECIFITIONS Wingspan...57.5 in. / 146cm Length...50 in. / 127cm Engine...46 2T /.70 4T or Electric equivalent. Radio...4 ~ 6 channel Almost ready

More information

PERCIVAL P-56 PROVOST

PERCIVAL P-56 PROVOST Instruction Manual Book. PERCIVAL P-56 PROVOST OLEO STRUTS LANDING GEAR. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Glow and EP 95% ALMOST READY TO FLY SPECIFICATION: - Wingspan: 1,644mm

More information

INSTRUCTION MANUAL. Specifications. Wing Area Flying Weight Fuselage Length. 28 oz / 800 g 30.0 in / 760 mm

INSTRUCTION MANUAL. Specifications. Wing Area Flying Weight Fuselage Length. 28 oz / 800 g 30.0 in / 760 mm ALMOST-READY-TO-FLY INSTRUCTION MANUAL Requires : -channel radio w/ micro servos, Outrunner Motor w/ Propeller Adaptor 0A Brushless ESC, 3 cells 11.1V 100 mah Li - Po battery & charger. Wing Span Wing

More information

Aure. Radio required : 3 channels, 4 servos airplane radio. Specifications. * Specifications are subject to change without notice.

Aure. Radio required : 3 channels, 4 servos airplane radio. Specifications. * Specifications are subject to change without notice. A L M O S T- R E A D Y- T O - F LY Aure INSTRUCTION MANUAL Radio required : 3 channels, 4 servos airplane radio Specifications Wing Span Wing Area Flying Weight Fuselage Length 81.5 in / 2070mm 572.0 sq

More information

96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED

96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED 96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED GENERAL INSTRUCTIONS Should you elect to use the recommended Door Skin, which is 1/8 mahogany plywood measuring 36 x 88. Have it cut

More information

High performance 90mm fiberglass jet

High performance 90mm fiberglass jet High performance 90mm fiberglass jet Assembly manual For intermediate and advanced fliers only! Specs Wingspan: 1255mm Fuselage length: 1250mm Flying weight: 2600-3000g Wing area: 22.6 dm² Wing loading:

More information

BUCKER BU 131 JUNGMANN ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER

BUCKER BU 131 JUNGMANN ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Instruction Manual Book. BUCKER BU 131 JUNGMANN ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Glow and EP 95% ALMOST READY TO FLY SPECIFICATION: - Wingspan: 1,850 mm (72.83 in). Length: 1,660

More information

DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27. Assembly and Operations Manual

DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27. Assembly and Operations Manual DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27 Assembly and Operations Manual Please review this manual throughly Before assembling or Operating The DORNIER DO 27 Semi scale sport model We ve used

More information

MUSTANG P-51. Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL

MUSTANG P-51. Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL MUSTANG P-51 Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL Specifications Wingspan---------------------------------------- 60.5 in----------------------- 153.7cm. Wing area-------------------------------------

More information

FAIREY ALBACORE. Instruction Manual Book. Glow and EP. Item code: BH % ALMOST READY TO FLY SPECIFICATION:

FAIREY ALBACORE. Instruction Manual Book. Glow and EP. Item code: BH % ALMOST READY TO FLY SPECIFICATION: Instruction Manual Book. FAIREY ALBACORE ALL BALSA - PLY WOOD CONSTRUCTION. COVERED IN A HEAT-SHRINK FILM WITH PRINTED. Glow and EP 95% ALMOST READY TO FLY SPECIFICATION: - Wingspan: 1,693mm (66.65in).

More information

BUILDING THE A6M2 ZERO

BUILDING THE A6M2 ZERO BUILDING THE A6M2 ZERO Product Support (Do Not Remove From Department) TOP FLITE MODELS, INC CONGRATULATIONS' You now own the most accurate R/C Stand-Off Scale kit ever produced We at Top Flite hope that

More information

PROCTOR. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH154. SPECIFICATION ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER

PROCTOR. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH154. SPECIFICATION ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Instruction Manual Book PROCTOR Item code: BH154. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,360 mm (53.54 in). Length: 1,480 mm(58.27 in).

More information

Velocity Slingjet. Specifications: Construction Span Length Take-off weight w/ gear. Balsa/foam/film 1055m m (41.54 ) 1040m m (40.

Velocity Slingjet. Specifications: Construction Span Length Take-off weight w/ gear. Balsa/foam/film 1055m m (41.54 ) 1040m m (40. Velocity Slingjet Specifications: Construction Span Length Take-off weight w/ gear Recommended servos w/o nose-steering Recommended fan Recommended motor Recommended controller Balsa/foam/film 1055m m

More information

Aviator Trainer40 ARF Instruction Manual Specifications

Aviator Trainer40 ARF Instruction Manual Specifications Aviator Trainer40 ARF Instruction Manual Specifications Wingspan: 65.0 in (1650 mm) Length: 53.1 in (1350 mm) Wing Area: 729sq in (47.0 sq dm) Flying Weight: 5.3 lbs (2400g) Dear Customer, Congratulations

More information

INSTRUCTIONS FOR FINAL ASSEMBLY

INSTRUCTIONS FOR FINAL ASSEMBLY MS: 11 INSTRUCTIONS FOR FINAL ASSEMBLY Graphics and specfications may change without notice. Specifications: Wingspan -------------------------------------------- 156 cm, 61.42 in. Wing area ---------------------------------

More information

Assembly Instructions. Stinger 120. Almost Ready to Fly

Assembly Instructions. Stinger 120. Almost Ready to Fly Stinger 120 Almost Ready to Fly Important Information: Please inspect the plane before beginning to assemble to make sure you are happy with it. After assembly has begun you cannot return the kit. If you

More information

Sig Mfg. Co., Inc South Front Street...Montezuma, Iowa 50171

Sig Mfg. Co., Inc South Front Street...Montezuma, Iowa 50171 Sig Mfg. Co., Inc...401-7 South Front Street...Montezuma, Iowa 50171 Introduction The SEALANE takes off and lands on water just as easy as the Sig Kadet LT40 does on solid ground. Gentle, graceful, sure

More information

JUNKERS JU87- B2 STUKA

JUNKERS JU87- B2 STUKA Instruction Manual Book Item code: BH169. JUNKERS JU87- B2 STUKA OLEO STRUTS LANDING GEAR. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED IN A HEAT-SHRINK FILM WITH PRINTED. 95% ALMOST READY TO FLY SPECIFICATION:

More information

HAWKER HURRICANE. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH147. SPECIFICATION

HAWKER HURRICANE. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH147. SPECIFICATION Instruction Manual Book Item code: BH147. HAWKER HURRICANE ALL BALSA - PLY WOOD CONSTRUCTION. COVERED IN A HEAT-SHRINK FILM WITH PRINTED. 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,520 mm (59.84

More information

Corvus Racer Colour schemes. AeroPlus RC Copyright 2013 All Rights Reserved

Corvus Racer Colour schemes. AeroPlus RC Copyright 2013 All Rights Reserved Corvus Racer 540 59 Item No:A E050003 Specifications WING SPAN: 59"(1500mm) LENGTH: 54.1"(1374mm) WING AREA: 654sq.in.(42.2sq.dm.) FLYING WEIGHT: 4.6 5.3lbs(2000 2300g) Electric:Brushless outrunner 8Oz.

More information

F3A -70E ASSEMBLY MANUAL

F3A -70E ASSEMBLY MANUAL F3A -70E ASSEMBLY MANUAL The new F3A-70E, was designed in an extremely lightweight structure, the all wood airframe, and the new revolutionary Lift Generator on landing gear give the F3A-70E an impressive

More information

Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL

Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL Specifications Wingspan -----------------------.148 cm--------------- 58.3 in. Wing area ----------------------- 3474sq. cm ---- 538.4sq

More information

STEP 1 STEP 2 STEP 3. Page 2

STEP 1 STEP 2 STEP 3. Page 2 INSTRUCTION MANUAL Congratulations on your purchase of the Bullet ARTF - the first Almost Ready to Fly version of this classic lowwinger. Based on the original and timeless Bullet design, the new Ripmax

More information

ASSEMBLY & OPERATIONS MANUAL

ASSEMBLY & OPERATIONS MANUAL TM TM AERO SUBARU 40-52 ARF ECS SEMI SCALE MODEL WITH POLYCOTE ECS ENHANCED GRAPHICS SYSTEM #VMA-S140B (blue as shown) #VMA-S140R (red) This model may be produced in a number of different graphic schemes

More information

DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27. Please review this manual throughly Before Assembling or Operating The DORNIER DO 27

DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27. Please review this manual throughly Before Assembling or Operating The DORNIER DO 27 DORNIER DO 27 SEMI SCALE SPORT MODEL DORNIER DO 27 Assembly and Operations Manual Please review this manual throughly Before Assembling or Operating The DORNIER DO 27 Semi Scale Sport Model We ve used

More information

LARK. Classic Legal Precision Stunter RSM DISTRIBUTION. presents. Charles Mackey. Wing Area 570sq. Wingspan 52.

LARK. Classic Legal Precision Stunter RSM DISTRIBUTION. presents.  Charles Mackey. Wing Area 570sq. Wingspan 52. RSM DISTRIBUTION presents LARK By Charles Mackey Photo _ Bob Hunt Classic Legal Precision Stunter Wingspan 52 Length 39.5 Wing Area 570sq Motor 35-46 www.rsmdistribution.com Page 2 Thank you for purchasing

More information

NOORDUYN NORSEMAN. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH157. SPECIFICATION

NOORDUYN NORSEMAN. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH157. SPECIFICATION Instruction Manual Book Item code: BH157. NOORDUYN NORSEMAN ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER. 95% ALMOST READY TO FLY SPECIFICATION - Wingspan: 1840 mm (72.44 in). - Length: 1180

More information

PITTS S2S CONSTRUCTION

PITTS S2S CONSTRUCTION PITTS S2S CONSTRUCTION FUSELAGE CONSTRUCTION 1) Place the right fuselage side over the plan and mark the former positions. Place the left side over the right side and mark the former positions. Glue F1

More information

RYAN STA SAFETY PRECAUTIONS. "Sport Scale E-Power ARF" For Intermediate and Advanced Fliers. This radio control model is not a toy!

RYAN STA SAFETY PRECAUTIONS. Sport Scale E-Power ARF For Intermediate and Advanced Fliers. This radio control model is not a toy! RYAN STA "Sport Scale E-Power ARF" For Intermediate and Advanced Fliers. SAFETY PRECAUTIONS This radio control model is not a toy! First-time builders should seek advice from people with model building

More information

Assembly Instructions STINGER

Assembly Instructions STINGER STINGER 120 ARF Important Information: Please inspect the plane before beginning to assemble to make sure you are happy with it. After assembly has begun you cannot return the kit. If you find a problem

More information

SPUNKY ASSEMBLY MANUAL

SPUNKY ASSEMBLY MANUAL SPUNKY ASSEMBLY MANUAL Please read the tips section at the back of this manual regarding the use of laser cut parts. The proper removal and preparation of these parts is important. When laser cut, some

More information

E-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit

E-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit E-AERO EPP PITTS KIT From BP HOBBIES Parts Included in kit Thank you for purchasing the BP Hobbies/E-aero EPP Pitts. Please take the time to read through the instruction manual before beginning the build.

More information

Super Sky Surfer 2000 Assembly Instructions

Super Sky Surfer 2000 Assembly Instructions Super Sky Surfer 2000 Assembly Instructions Note: Plug and Play version of the Sky Surfer comes with fuselage pre-glued and motor/servos installed. If you wish to route antennas or wires through the tail,

More information

BOOMERANG TORUS. Aerobatic Sport Jet for 20 to 34 lbs (P80 to P160) thrust turbines.

BOOMERANG TORUS. Aerobatic Sport Jet for 20 to 34 lbs (P80 to P160) thrust turbines. BOOMERANG TORUS Aerobatic Sport Jet for 20 to 3 lbs (P80 to P160) thrust turbines. Specifications: Span... 83" (2209mm.) Span with Wingtip Tanks 90" (2286mm.) Length...87" (2108mm.) Weight 29 Lbs.(13.15

More information

Taylorcraft 72 KIT WARRANTY

Taylorcraft 72 KIT WARRANTY Taylorcraft 72 KIT # K-502 Assembly Instructions Revision:02 12-10-13 WARRANTY Alien Aircraft Corp. guarantees this kit to be free from defects in both material and workmanship at the date of purchase.

More information

1/6 PA-25 PAWNEE. *Specifications are subject to change without notice.*

1/6 PA-25 PAWNEE. *Specifications are subject to change without notice.* 1/6 PA-25 PAWNEE INSTRUCTION MANUAL [ A335 Kit ] Wing Span : 72 in / 1830 mm Wing Area : 736 sq in / 47.5 sq dm Flying Weight : 6.6 lbs / 3000 g Fuselage Length : 48 in / 1220 mm Requires : "Glow Power"

More information

WE GET PEOPLE FLYING AT-6

WE GET PEOPLE FLYING AT-6 TM WE GET PEOPLE FLYING AT-6 Texan.60 ARF ASSEMBLY MANUAL Specifications Wingspan:... 67.5 in (1714mm) Length:... 48 in (1219mm) Wing Area:... 706 sq in (45.54 sq dm) Weight:... 7 8.5 lb (3.17 3.85 kg)

More information

SZD-10 bis CZAPLA ASSEMBLY MANUAL IN PICTURES

SZD-10 bis CZAPLA ASSEMBLY MANUAL IN PICTURES 1 RUDDER Plan and parts: 2 Assembly steps: Photo above: glue together rudder spar, ribs and trailing edge. Clamp spar to a flat surface (chipboard on the photo) and make sure the straight aligment of the

More information

LANIER - Giles % - INSTRUCTIONS

LANIER - Giles % - INSTRUCTIONS Additional Parts Required (4) or more channel radio with 4 servos..25 -.36 two stroke or.40 -.52 four stroke engine Appropriate Master Airscrew prop and Hayes mount for your engine. 2-1/2 Tru-Turn spinner

More information

THE APOGEE A 100-INCH AMA DURATION SAILPLANE FROM DYNAFLITE

THE APOGEE A 100-INCH AMA DURATION SAILPLANE FROM DYNAFLITE THE APOGEE A 100-INCH AMA DURATION SAILPLANE FROM DYNAFLITE Apogee is the intermediate sailplane designed to be competitive in AMA duration contests. Effective spoilers, rudder and full flying stabilizer

More information

ARF Manual Elevator assembly Wings assembly Landing Gear Mid section wing Front Retract assembly Midsection to fuselage

ARF Manual Elevator assembly Wings assembly Landing Gear Mid section wing Front Retract assembly Midsection to fuselage Easyjet ARF Manual 1. Elevator assembly 2. Wings assembly 3. Landing Gear 4. Mid section wing 5. Front Retract assembly 6. Midsection to fuselage 7. Engine / Electrical (under contruction) 8. Fuel system

More information

LANIER - Double Trouble - INSTRUCTIONS. Tail 1 T1 ¼ Balsa 1 T2 ¼ Balsa 2 T3 ¼ Balsa 1 T4 ¼ Balsa 1 T5 ¼ Balsa 1 T6 ¼ Balsa 2 J1 ¼ Balsa 2 J2 Lite ply

LANIER - Double Trouble - INSTRUCTIONS. Tail 1 T1 ¼ Balsa 1 T2 ¼ Balsa 2 T3 ¼ Balsa 1 T4 ¼ Balsa 1 T5 ¼ Balsa 1 T6 ¼ Balsa 2 J1 ¼ Balsa 2 J2 Lite ply Tail 1 T1 ¼ Balsa 1 T2 ¼ Balsa 2 T3 ¼ Balsa 1 T4 ¼ Balsa 1 T5 ¼ Balsa 1 T6 ¼ Balsa 2 J1 ¼ Balsa 2 J2 Lite ply Other Parts 2 Aluminum Gear 1 3/32 Music wire tail skid 2 Elevator and J-plane joiner wire

More information

Piper Cherokee /3 scale. Construction Manual

Piper Cherokee /3 scale. Construction Manual Piper Cherokee 140 1/3 scale Construction Manual STAB CONSTRUCTION 1. Remove foam cores from cradle and place on flat surface. Inspect pieces before you epoxy halves together making sure leading and trailing

More information

(Build Instructions)

(Build Instructions) (Build Instructions) Specifications * Wingspan: 58cm * Length: 50cm * Flying Weight: 59 grams * Channels: 3 (Rudder Elevator Throttle) * Suggested Receiver: 4Ch Micro * Motor: 8mm GearDrive * Prop: GWS

More information

JAMISON SPECIAL. Building Guide

JAMISON SPECIAL. Building Guide JAMISON SPECIAL Building Guide WING Mark then drill holes for wing jig rods. Slide Ribs onto jig rods Mark the rib positions on 1/16 x 1 trailing edge, 1/4 x 1/4 leading edge & 1/4 x 1/4 spars Pin ribs

More information

For Fuselage Assembly.

For Fuselage Assembly. 1.Find these Parts First. 2.Take out F11, F12 For Fuselage Assembly. 3.Assemble F13 as below. Do not glue!!! 4.Assemble F4 as below. Do not glue!!! Do not glue!!! 5. Assemble F16 Do not glue!!! 6. Turn

More information

Preliminary pilot information

Preliminary pilot information Recommended RC-components: Preliminary pilot information RC-component suggestions for Freestyler 3, V-tail version FLAPS AILERONS V-tail receiver battery low-cost HS85 MG HS85 MG HS81 MG SMC 14 4 x AA

More information

LANIER - Ultimate Pitts - INSTRUCTIONS. Additional Parts Required. (12) 4-40 blind nuts (Dubro #606)

LANIER - Ultimate Pitts - INSTRUCTIONS. Additional Parts Required. (12) 4-40 blind nuts (Dubro #606) Additional Parts Required (4) or more channel radio with 7-8 servos..91-2.2 two stroke or 1.20-1.84 four stroke engine Appropriate Master Airscrew prop and Hayes mount for your engine. 3 Tru-Turn spinner

More information

A S S E M B L Y M A N U A L

A S S E M B L Y M A N U A L A S S E M B L Y M A N U A L Kit features. Ready-made minimal assembly & finishing required. Ready-covered covering. Photo-illustrated step-by-step Assembly Manual. Specifications Wingspan --------------------------

More information

Building instructions. Grob G 109. RC motor-glider Order No. 1340/00. Specification: approx mm. RC functions:

Building instructions. Grob G 109. RC motor-glider Order No. 1340/00. Specification: approx mm. RC functions: Building instructions Grob G 109 RC motor-glider Order No. 1340/00 Specification: Wingspan Length Wing area Tailplane area Total surface area All-up weight with 12 cells Wing loading (wing only) approx.

More information

Instruction Manual. Item No: AL001

Instruction Manual. Item No: AL001 Instruction Manual Item No: AL001 Specifications: Wingspan: 2037mm (80.2 in) Length: 1677mm (66 in) Wing Area: 65.5dm2 (1015.3 sq in) Flying Weight: 7.6kg (16.7 lbs) Engine(not incl.): 45-50cc Gas Radio(not

More information

LANIER R/C. Stinger WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE LIMITED WARRANTY

LANIER R/C. Stinger WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE LIMITED WARRANTY LANIER R/C Stinger WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE This R/C kit and the model you will build from it is not a toy! It is capable of serious bodily harm and property damage.

More information