Technology with Time...

Size: px

Start display at page:

Download "Technology with Time..."

Tobias Reed
5 years ago
Views:

PLC Controlled Bandsaw Machine with LMG-LX Rails & Bearings Fully Automatic PLC Controlled Horizontal Double Column LMGA Type Bandsaw Machine.? Steel Center.? General Workshop.? Tool Room.

? PLC control for auto sequencing.? Hydraulic blade tensioner.? Hydraulic clamping vice.? Built in hydraulic tank.? Carbide blade guide with bearing.? Built in Coolant Tank & Motor.

1 PLC Controlled Bandsaw Machine with LMG-LX Rails & Bearings Fully Automatic PLC Controlled Horizontal Double Column LMGA Type Bandsaw Machine.? Steel Center.? General Workshop.? Tool Room.? Forging Industries.? Compact construction with excellent aesthetics.? Wide Blade for Faster & Taper Free cutting.? Linear Motion Guide & Bearing Block for High Accuracy.? PLC control for auto sequencing.? Hydraulic blade tensioner.? Hydraulic clamping vice.? Built in hydraulic tank.? Carbide blade guide with bearing.? Built in Coolant Tank & Motor. Specification : Models LMGA-LX 205 LMGA-LX 280 LMGA-LX 350 LMGA-LX 450 Round - In mm Square - In mm Cutting Speed - M/Min - Ft./Min Blade Size - mm - Ft. & Inch Saw Motor Capacity- K.W. - H.P. Hydraulic Reservoir- Ltr. - Gallon Coolant Motor Capacity- K.W. - H.P. Coolant Reservoir- Ltr. - Gallon Hyd. Motor Capacity- K.W. - H.P. Apprx. Net Wt. Overall Dimensions In mm - LxWxH Stoke in MM With Bundle Attachment x 27 x 0.9mm x 2000 x Accessories shown are not part of standard supply x34x1.1mm(Side Rail) 4100x34x1.1mm(New Front Rail) x 2000 x x 41 x 1.3mm x 2200 x x 41 x 1.3mm x 2300 x 2400 LMGA-HX models are also available with blade rapid approach, Saw blade speed control by VFD invertor from control panel, Swarf conveyor, Belt driven wire brush, Machine lamp, Floating shuttle vice, Bar exhaust for auto stop as standard feature 400

Jumbo Size Fully Automatic Bandsaw Machine with LMG Rails & Bearings ITL - Pioneer & Trendsetter for last 25 years in metal cutting in India, has Designed & Developed - State of the Art features to

ITL has led the way in introducing highly advanced LMG Bandsaw Series, (200, 280, 350, 450, 660, 860, 1020, 1260, 1520, 1760, 2020 mm Solid Steel Bar Cutting capacities) while achieving high accuracy

2 Jumbo Size Fully Automatic Bandsaw Machine with LMG Rails & Bearings ITL - Pioneer & Trendsetter for last 25 years in metal cutting in India, has Designed & Developed - State of the Art features to make metal cutting faster at reduced per cut cost. ITL has led the way in introducing highly advanced LMG Bandsaw Series, (200, 280, 350, 450, 660, 860, 1020, 1260, 1520, 1760, 2020 mm Solid Steel Bar Cutting capacities) while achieving high accuracy in metal cutting. Special Features Anti friction LMG* bearing for smooth movements of cutting head Electronic Automatic feed regulation* to adjust feed without operator involvement depending upon material composition, hardness and cross - section. Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment as blade verticality is well maintained during manufacturing of the machine. Floating shuttle vice* guided in LMG Bearing slides for self alignment depending upon work piece straightness and/or surface roughness. Bar stock slides on main vice without any resistance, as the shuttle vice align it automatically. Wider shuttle vice helps proper gripping of bar stock while indexing. High pressure coolant jets are provided for high cutting rates. Construction Detail Auto height stop on return stroke of cutting head. Automatic machine stop if blade breaks. Fully heavy duty steel welded structure - torsion free construction. Cutting head is guided with the help of two vertical high precision clearance free Linear Motion Guide Rail & Bearings. Infinitely variable pressure controlled cutting feed & rapid upward return movement by hydraulic cylinder. Built in coolant tank powered with High Flow Coolant Motor. Tungsten Carbide face guides with ball bearings. Power driven rotary cleaning wire brush. Hydraulically operated main vice & shuttle vice. Build in hydraulic oil tank. PLC control for Auto Sequencing of all operation. Standard Features Auto cycle sequencing with PLC Automatic height adjustment for Saw Frame depending upon cut pieces height to provide safe clearance between cut piece & blade. Rapid approach of cutting arm upto the cut surface to enhance productivity Coolant pump motor and flow nozzles with control Piece counter & length multiplier through PLC Infinitely variable blade speed from control panel through variable frequency drive for optimum productivity & Tool life Floating Shuttle Vice for forged & uneven surface bars Electrically driven Swarf Conveyor with Container Hydraulic band tensioning arrangement with continuous stretching of blade during cutting for taper Free Cuts Infinitely variable Feed Control Valve Length setting arrangement with 0.1 mm least count through Digital Indicator (electronic magnetic scale) Hydraulic vices & shuttle system for automatic clamping through full stroke double acting hydraulic cylinders Hydraulic motor driven Wire brush for blade gullet cleaning Machine lamp Hand operated lubrication system for main columns Bearings Electrical control panel with push button, emergency stop button, main isolator, PLC, VFD, step down transformer, auxiliary contractor, cable connector and connector with fuses for solenoid coil to protect PLC

3 Jumbo Size Fully Automatic Bandsaw Machine with LMG Rails & Bearings Specification : Models LMGA 660 LMGA 860 LMGA 1020 LMGA 1260 LMGA 1520 Round - In mm Square - In mm Cutting Speed - M/Min - Ft./Min Blade Size - mm Rear Feeding machine 8000 x 67 x 1.6 Rear Feeding machine 8800 x 67 x 1.6 Rear Feeding machine 9700 x 67 x 1.6 Rear Feeding 4 wheel m/c x 67 x 1.6 Rear Feeding 4 wheel m/c x 67 x 1.6 Saw Motor Capacity - K.W. - H.P Hydraulic Reservoir - Ltr. - Gallon Coolant Motor Capacity - K.W. - H.P Coolant Reservoir - Ltr. - Gallon Hyd. Motor Capacity - K.W. - H.P Apprx. Net Wt. LMGA-6500 LMG TV-5800 LMGA-8000 LMG TV-6800 LMGA-9000 LMG TV-8200 LMGA LMG TV-9300 LMGA LMG TV Overall Dimensions In mm - LxWxH 3600 x 2600 x x 2600 x x 2600 x x 2600 x x 2800 x 4500 Max Shuttle Stroke in mm 600mm Rear feeding type 600mm Rear feeding type 600mm Rear feeding type 600mm Rear feeding type 600mm Rear feeding type

Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Horizontal Double Column LMGTV-LX Type Bandsaw Machine?

? Hydraulic blade tensioner.? Hydraulic clamping vice.? Built in hydraulic tank.? Carbide blade guide with bearing.? Built in Coolant Pump with Motor.? Rotary wire Brush for blade gullet cleaning.

4 Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Horizontal Double Column LMGTV-LX Type Bandsaw Machine? Cutting Traders.? General Workshop.? Tool Room.? Compact construction with excellent aesthetics.? Wide Blade for Faster & Taper Free cutting.? Linear Motion Guide & Bearing Block for High Accuracy.? Hydraulic blade tensioner.? Hydraulic clamping vice.? Built in hydraulic tank.? Carbide blade guide with bearing.? Built in Coolant Pump with Motor.? Rotary wire Brush for blade gullet cleaning.? 5 Speed of Saw blade for all type of material. Specification : Models LMGTV-LX 205 LMGTV-LX 285 LMGTV-LX 350 LMGTV-LX 450 Round - In mm Square - In mm 200 mm mm mm mm mm mm mm mm 18 Cutting Speed - M/Min - Ft./Min Blade Size L x W x T - mm 3760 x 27 x x 34 x x 1.35 x x 41 x x 1.6 x x 41 x x 1.6 x LMGTV-HX models are also available with Blade Rapid Approach, Saw Blade Speed Control by VFD invertor from control panel, Swarf Conveyor Belt driven Wire Brush and Machine Lamp as standard feature

Jumbo Size Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Horizontal Double Column LMGTV Type Bandsaw Machine? Pair of Anti friction LMG Bearings on vertical columns.

5 Jumbo Size Semi Automatic Bandsaw Machine with LMG Rails & Bearings Semi Automatic Horizontal Double Column LMGTV Type Bandsaw Machine? Pair of Anti friction LMG Bearings on vertical columns.? Electronic Sensor for Automatic feed regulation.? Infinite variable speed setting thru VFD.? Hydraulic Clamp Vice.? Hydraulic tensioning of Blade.? Manual bar positioning for cutting.? Step Cutting possible to save material.? Built in coolant Tank & Pump.? Forging Unit.? Tool Room.? Steel Traders / Cutting Centers.? General Cutting Applications. Specifications : Models LMGTV 660 LMGTV 860 LMGTV1020 LMGTV 1260 LMGTV 1520 Round - In mm Square - In mm 660 mm mm mm mm mm mm mm mm mm mm 59 Blade Size L x W x T - mm 8000 x 67 x x 67 x x 67 x x 67 x x 67 x 1.6

ITL - Nano ITL - Nano Introducing Compact, Versatile, Cost effective ITL has designed and manufactured a most cost effective Double Column horizontal Band Saw Machine

The Machine can be used for Mitre Cutting up to 45 degree. Most versatile Highly cost effective Economical Bandsaw for Job Shops & small production application.

Geared Motor from Bonfiglioli, Italy, for Saw Drive Wheel.

which controls excessive feed automatically. Coolant Pump has been provided with a Built in Tank. The Machine uses 27mm wide HSS Bi-metal Band Saw Blade.

6 ITL - Nano ITL - Nano Introducing Compact, Versatile, Cost effective ITL has designed and manufactured a most cost effective Double Column horizontal Band Saw Machine with Linear Motion Guide Bearings for trouble free operation, The Machine can be used for Job Shop as well as for small production requirements. The Machine can be used for Mitre Cutting up to 45 degree. Most versatile Highly cost effective Economical Bandsaw for Job Shops & small production application. Hydraulic Feed Sensor Double acting Hydraulic Cylinder Precision Flow Control Valve Tungsten Carbide Tip (TCT) as well as HSS BI-metalic Blade can be used on the machine. Worm Gear box for drive Motor directly coupled to the Gear Box Infinitely Variable Speed Drive (VFD) The Machine has been provided with 75mm Center Distance Worm Geared Motor from Bonfiglioli, Italy, for Saw Drive Wheel. The Upward Motion of the Cutting Arm is performed by Hydraulic Cylinder and Down Feed is regulated through a Flow Control Valve as well as Hydraulic Feed Regulator which controls excessive feed automatically. Coolant Pump has been provided with a Built in Tank. The Machine uses 27mm wide HSS Bi-metal Band Saw Blade. Specification Models (ITL Nano) Blade Speed Motor Power Hydraulic Tank Capacity Coolant Tank Capacity Blade L x W x T mm Electrical Size Weight Solid at mm round Square Pipe & Structural at 90 -Ø260mm,? 260 x 260mm at 45 -Ø160 mm,? 160 x 260mm 3505 x 27 x 0.9mm Saw Motor - 2 H.P. Hydraulic Motor H.P. Coolant Motor H.P. 4 Ltr. 20 Ltr. HSS - Bimetal x 27 x 0.9mm 440V - 3 phase - 50 Hz 1250 x 630 x 1250 Work height from floor mm 620 kgs. Specification

Double Column LMG SWM & LMG SWA Bandsaw Machine State of the Art Mitre-Swivelinmotorized head swiveling facility from bandsaw machine with 90 to 45 at left and 90 to 30 at right.

? Electronic digi. LMG SWA Automatic Series? Swiveling Cutting Head with motorized cut angle positioning from operator console.? Manual Bar positioning. Automatic indexing (optional).

? Steel structure fabrication.? Gas & oil pipeline? Pipe Band sector cutting.

7 Double Column LMG SWM & LMG SWA Bandsaw Machine State of the Art Mitre-Swivelinmotorized head swiveling facility from bandsaw machine with 90 to 45 at left and 90 to 30 at right. LMG SWM Manual Series? Manual positioning of Swiveling Cutting head for desired cut angle.? Manual Bar positioning.? Cutting angels on RH side.? Cutting angels on LH side.? Electronic digi. LMG SWA Automatic Series? Swiveling Cutting Head with motorized cut angle positioning from operator console.? Manual Bar positioning. Automatic indexing (optional).? Cutting angels on RH side.? Cutting angels on LH side.? Duct pipe cutting in electrical equipment Industries.? Fabrication Shop.? Tower manufacturing.? Steel structure fabrication.? Gas & oil pipeline? Pipe Band sector cutting. Specifications : Models 90 LMG SWM in mm Blade Size Swiveling of Cutting Head 440 LMG SWM (only one side) 6500 x 41 x 1.3 Manual 640 LMG SWM (only one side) 8750 x 54 x 1.6 Manual 1800 LMG SWM 440 LMG SWA 640 LMG SWA 1800 LMG SWA (only one side) x 54 x (only one side) 6500 x 41 x (only one side) 8750 x 54 x (only one side) x 54 x 1.6 Manual Motorized Motorized Motorized

Vertical Metal Cutting Bandsaw Machine 100 V2M (Manual) 200 V2H / 300 V3H (Hydraulic)? Very simple manually push type cutting machine.? HSS Bimetal or Carbon steel blade can be used.

? Hydraulic Blade Tension.? Job can be cut at slant angle, Front 45 rear 10? Most suitable for Tool Room application.? Machine builders.? Fabricators. 300 VTRH (Tool-Room)?

? Most suitable for Tool Room application.? Machine builders.? Fabricators.

8 Vertical Metal Cutting Bandsaw Machine 100 V2M (Manual) 200 V2H / 300 V3H (Hydraulic)? Very simple manually push type cutting machine.? HSS Bimetal or Carbon steel blade can be used.? For general application to cut Ferrous & Non Ferrous,? Wood, Plastic etc.? Work Piece can be fixed at desired position to cut automatically by table movement.? Good for slitting Plates/Blocks.? Hydraulic Blade Tension.? Job can be cut at slant angle, Front 45 rear 10? Most suitable for Tool Room application.? Machine builders.? Fabricators. 300 VTRH (Tool-Room)? Work Piece can be fixed at desired position to cut automatically by table movement.? Good for slitting Plates / Blocks.? Jobs can be cut at slant angle front 45 & rear 10.? Most suitable for Tool Room application.? Machine builders.? Fabricators. Specifications : Model 100 V2M 200 V2H 300 V3H 300 VTRH Cutting Capacity 100 Height 200 Throat 200 Height X 400 Throat X 300 Table Movement 300 Height X 600 Throat X 600 Table Movement 300 Height X 900 Throat at 90 No. of Wheels Job Movement Manual - - Work Table Operation Table Tilt RH/LH- (Optional) - - Hydraulic Hydraulic - - Blade Speed (Mtr./Min.) 30/45/ Blade Tension Manual Hydraulic Hydraulic Blade Size 3760 x 27 x x 34 x x 34/41 x 1.1/1.3 2 Hydraulic - 45 / Hydraulic 6300 x 41 x 1.3

NC-AC Servo Operated Carbide Circular Metal Sawing Machine (CSNC-100 / CSNC-125) High Speed Numerically

backed by the latest state - of - the - art technology to overcome quality and productivity limitations,

Good surface finish and face squareness hence do not require facing operation.

9 NC-AC Servo Operated Carbide Circular Metal Sawing Machine (CSNC-100 / CSNC-125) High Speed Numerically Controlled AC Servo Driven Carbide Circular Sawing Machines Salient High Speed Carbide Circular Sawing is backed by the latest state - of - the - art technology to overcome quality and productivity limitations, being observed in other methods of Metal sawing. Good surface finish and face squareness hence do not require facing operation. Achievable surface finish is around Ra1.6 to 3.2 Productivity examples for CSNC models only.? C - 40 Bars of Diameter 100mm x 40mm long =180 pieces per hr. (By using Coated TCT blade) Colour Touch Screen Cutters TCT

10 NC-AC Servo Operated Carbide Circular Metal Sawing Machine (CSNC-100 / CSNC-125) High Speed Numerically Controlled AC Servo Driven Carbide Circular Sawing Machines Specification : Cutting Capacity Circular Saw Cutter Bar Feed (Indexing) Coolant Saw Motor Hydraulics Electrical Floor Space/ Machine Size Weight (Approx.) Accessories Specification Round Bar/Pipe Square Bar Stock Bar Length Cut-off Length Crop Cut Length Remnant Length Tungston Carbide Tipped Saws Diameter x Body Thickness x Bore Nos. of Mounting Hole/ Hole Dia/PCD of Hole Speed - MPM Variable by Invertor Saw Cut Feed - mm/sec Servo Driven by Ball Screw Cutter Head Position on Liner Bearing Slide Servo driven by Ball Screw Arrangement Multi-cuts in Single Stroke Flood/Micro Mist Flood Coolant Tank Capacity Micro-mist Tank Capacity Air Pressure for Micro-mist HP/RPM/Phase/Volts/Hertz KW HP/RPM/Phase/Volts/Hertz Tank Capacity Operating Pressure Control Volts Supply L x W x H Without Auto-loader in mm (Approx.) L x W x H With Auto-loader in mm (Approx.) Standard Machine Auto-loader (6 m Long) Model (ITL CSNC-100) mm mm 2-6 m mm-or more mm 80 mm TCT Saws Dia 315 x 2.2 x 40 4/15/80 & 4/11/90 Dia 360 x 2.6 x 40 4/15/80 & 4/11/ Inclined Automatic Yes Flood/Micro-mist 80 ltrs. 0.5 ltr. 5.5 Bar Min. 20/1400/3/440/50 15KW 3/1400/3/440/ ltrs kg/sq cm 24 V DC 440 V/ 3 Ph/50 Hz 2600 x 1850 x x 1900 x kgs 1500 kgs Model(ITL CSNC-125) mm mm 2-6 m mm-or more mm 90 mm TCT Saws Dia 460 x 2.7 x 50 4/11/ Inclined Automatic Yes Flood/Micro-mist 100 ltrs. 0.5 ltr. 5.5 Bar Min. 25/1400/3/440/ KW 3/1400/3/440/ ltrs kg/sq cm 24 V DC 440 V/ 3 Ph/50 Hz 3300 x 2500 x x 2800 x kgs 2500 kgs STANDARD-PLC Control System, Servo Motor & Ball Screw for Indexing and Cutter Head Feeding, Stepless Cutter Speed by Invertor, Cutter Cleaning Wire Brush, Cutter Guide Support, Auto Lubrication System, Micromist System from USA/Flood Coolant System, Top Clamping Arrangement. OPTIONAL ACCESSORIES, Auto-loader 6 m long, Crop Cut Separator, Dedicated Air Compressor.

NC-AC Servo Operated Carbide Circular Metal Sawing Machine CSNC-71/CSNC-80 High Speed Numerically Controlled AC Servo driven Carbide Circular Metal Sawing Machines?

Achievable surface finish is around Ra 1.6. to 3.2.? Can use Carbide Tipped and HSS Circular saws.? Touch Screen HMI.? Job positioning automatic as per set length.

Specifications : Specification ITL CSNC - 71 ITL CSNC - 80 Saw Details Round Bar/Pipe Square Bar Stock Bar Length Cut off Length Crop Cut length Remnat Length Tungsten Carbide Tipped/HSS Saw Diameter

11 NC-AC Servo Operated Carbide Circular Metal Sawing Machine CSNC-71/CSNC-80 High Speed Numerically Controlled AC Servo driven Carbide Circular Metal Sawing Machines? Saw head Fully Automatic programmable with NC Controlled Servo motor with Ball screw for saw feed to get optimum tool life.? Good Surface finish and face squareness do not require facing operations. Achievable surface finish is around Ra 1.6. to 3.2.? Can use Carbide Tipped and HSS Circular saws.? Touch Screen HMI.? Job positioning automatic as per set length.? Most suitable for cold forge shop as very close weight variation in cut piece.? Forging Unit.? Steel Traders.? CNC production centers for Auto components? Engineering Industries. Specifications : Specification ITL CSNC - 71 ITL CSNC - 80 Saw Details Round Bar/Pipe Square Bar Stock Bar Length Cut off Length Crop Cut length Remnat Length Tungsten Carbide Tipped/HSS Saw Diameter x Body Thickness x Bore Nos. of Mounting Hole x Hole dia x PCD. Saw Diameter x Body Thickness x Bore Nos. of Mounting Hole x Hole dia x PCD Saw Diameter x Body Thickness x Bore Nos. of Mounting Hole x Hole dia x PCD mm 7-49 mm 2-6 Meter 6-300mm - or More mm 80 mm TCT/HSS Dia 250 x 2.0 x 32 4/9/50 & 4/11/63 Dia 285 x 2.0 x 32 4/9/50 & 4/11/63 Dia 315 x 2.2 x 40 4/9/50 & 4/11/63 (HSS) mm 7-56 mm 2-6 Meter 6-300mm - or More mm 80 mm TCT/HSS Dia 285 x 2.0 x 32 4/9/50 & 4/11/63 Dia 315 x 2.2 x 40 4/9/50 & 4/11/63 Dia 315 x 2.2 x 40 4/12/90 & 4/15/80

NC-AC Servo Operated Circular Sawing High Speed Pipe Cutting Machine? Very high production rates, 20,000 Cuts of dia 25mm x 1.5mm Thick Tube / Shift? Very good length accuracies and taper free cuts.

Bundle Cutting possible for higher productivity.? CNC production centers for Auto components.? Auto Ancillaries.? Fabrication Shops.? Engineering Workshops.

12 NC-AC Servo Operated Circular Sawing High Speed Pipe Cutting Machine? Very high production rates, 20,000 Cuts of dia 25mm x 1.5mm Thick Tube / Shift? Very good length accuracies and taper free cuts.? Fully automatic programmable with NC Controlled Servo drives.? Can use both Carbide Tipped and HSS Circular saws.? Touch Screen, easy programming.? Auto Loader for round bar loading (optional)? Bundle Cutting possible for higher productivity.? CNC production centers for Auto components.? Auto Ancillaries.? Fabrication Shops.? Engineering Workshops. Specifications : Model Specification ITL CSNC - 71P ITL CSNC - 125P Saw Details Round Pipe Square Pipe Stock Pipe Length Crop Cut length Remnat Length Tungsten Carbide Tipped or HSS Saws Diameter x Body Thickness x Bore Nos. of Mounting Hole & PCD Diameter x Body Thickness x Bore Nos. of Mounting Hole & PCD Diameter x Body Thickness x Bore Nos. of Mounting Hole & PCD mm 7-49 mm 2-6 Meter mm Max 80 mm TCT / HSS Dia 285 x 2.0 x 32 4/9/50 & 4/11/63 Dia 315 x 2.2 x 40 4/15/80 & 4/12/90 Dia 360 x 2.6 x 40 4/9/50 & 2/11/90 (Bore Dia 40 to use with ring) mm mm 2-6 Meter mm Max 100 mm TCT or HSS Dia 315 x 2.2 x 40 4/15/80 & 4/12/90 Dia 360 x 2.6 x 40 4/9/50 & 2/11/90 Dia 460 x 2.7 x 50 2/15/80 & 2/11/90

Hydraulic Power Hacksaw Machine State of the Art KASTO German Technology, Proven for last 35 years, more than 32000 machines in use world over.? Good Choice for Tool Room and Engineering Workshops.

13 Hydraulic Power Hacksaw Machine State of the Art KASTO German Technology, Proven for last 35 years, more than machines in use world over.? Good Choice for Tool Room and Engineering Workshops.? Stainless Steel cutting in easy.? Copper and alloy cutting is economical.? Mitre cutting upto 45 possible.?????? Cutting arm for high Blade Tension with pre-loaded adjustable antifriction ball bearings. Cutting arm guided in vertical plate, self lubricated due to grease packing. Protected from atmosphere. 6 cutting speeds with dual speed motor (Standard). Infinitely variable feed rate and positive hydraulic cutting pressure. KASTO patented ARC cutting technique for fast cutting.? Motorized hydraulic pump for faster approach of blade to job.? Full cutting efficiency by positive feed pressure.? Forward cutting operation by hydraulic pressure.? New tech HSS Bi-metel blade with tooth hardness of 67 HRC can also be used.? In case of hydraulic failure blades & job are saved automatically. Specifications : Models PSB 250 U 300 PH Cutting Range at 90 Round mm Flat mm 250 x x 160 Square mm 210 x x 250 Cutting Range at 45 Round mm Flat mm 160 x 110, 145 x x 150,180 x 170 Square mm 150 x x 170 Saw Details Saw Blade Dimensions 400 x 36 x x 38 x 2

Microlube Fluid Accessories ITL Microlube Fluid is a premium plant based metal cutting lubricant that provides highest lubricity to the cutting edge of any tool and cleans - up the disposal.

FE-3000 - Ideal for cutting ferrous material. SP-4000 - Useful for special purpose cutting.

blades with more precise and reliability.

14 Microlube Fluid Accessories ITL Microlube Fluid is a premium plant based metal cutting lubricant that provides highest lubricity to the cutting edge of any tool and cleans - up the disposal. ITL Microlube is 100% environmentally safe. NF Suitable & beneficial for cutting non-ferrous materials. SS Excellent for cutting stainless steel material. FE Ideal for cutting ferrous material. SP Useful for special purpose cutting. AL Specially suitable for cutting Aluminium MicroMist Cooling Systems Micromist cooling system is used for applying a thin film of micro lube to either bend saw or circular saw. blades with more precise and reliability. Benefits Precise dispensing gives the user the ability to eliminate mess associated with flood coolant, recycled chips that are dry,and reduces cutting force to maximize the sawing productivity. THREE Outlet Nozzle Blade Tension Meter Correct Bend Tension is vital to ensure cut straightness. the ITL Tension Meter quickly & simply measures the exact blade tension while mounted on the bend. Recommended pressure is provided with the machine manual. This will help to avoid off square cutting through low tension & blade breakage and machine damage through excessively high tension.

15 ITL_205_LMGA-HX Fully Automatic PLC controlled Horizontal Double Column LMG type Bandsaw Machine IT_CSV_90 High Speed Bar / Pipe Cutting Machine, fully automatic programmable with NC and Servo Controls can use Carbide Tipped and HSS Circular saws. ITL_2100X1800_LMGTV Double Column LMGTV type Semi Automatic Bandsaw Machine (Hydraulic LMG Bearings)

CSNC CARBIDE CIRCULAR SERIES

CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT