BARON-MAX 5-Axis Vertical Machining Centers

Transcription

1 BARON-MAX 5-Axis Vertical Machining Centers 5-axis profiling vertical machining centers provides a cost-effective solution for five-axis machining operations The 5 Axis or 5 Face gives you Increased flexibility Reduced cycle times Improved surface finish Machining strategies improved Enhanced controlled precision Reduced work in progress Industrial sectors: Mould and die machining Aerospace Automotive Power generation Telecommunications Medical

2 Continuous 5 Axis machining Increased flexibility of 5 Axis machining provides additional new machining capability to be explored with the added advantage of improved productivity. Heavy duty cast iron rigid construction, Rapid traverse of 30 M/min reducing idle time The integrated trunnion table provides exceptional part clearances and larger part capacity Repeatability accuracy of all axis mm 5 simultaneous axis machining FAGOR Advanced Control Technologies for 5-Axis Machining The machines with FAGOR last generation 8065 CNC for developing their latest 5-axis machine, the calculation algorithms of the 8065 CNC make it possible to optimize high speed machining. This achieves higher cutting speeds, smoother contours, better surface finish and higher accuracy, the 8065 CNC controls RTCP machining on 5-axis machines. The main axes and another 2 rotary axes that may be at the spindle or on the work table. In 5-axis machining, it is common to work with inclined planes. The 8065 offers very simple formats for Defining inclined planes both for machines with automatic rotary axes and for manual ones.

3 Technical Specifications Model TR-120/5AX TR-200/5AX TR-320/5AX Travel (mm) Longitudinal travel (X-axis) 400 mm 500 mm 600 mm Cross travel (Y-axis) 360 mm 360 mm 550 mm Vertical travel (Z-axis) 350 mm 350 mm 500 mm Spindle nose to table top mm mm mm Spindle center to column 550 mm 550 mm 640 mm Maximum Traverse Speed Rapid traverse X-axis Rapid traverse Y-axis Rapid traverse Z-axis Position Accuracy X, Y & Z ±0.005 mm (± ) Repeatability Accuracy X, Y & Z ± mm (± ) Guide Way (Roller Guide Way) X-axis (Roller Guide Way ) 2 x 30 mm 2 x 35 mm Y-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm Z-axis (Roller Guide Way ) 2 x 35 mm 2 x 35 mm Lubricator Lubricator WAY LUBE 68 Ball Screw Diameter & pitch X-Y-Z 32 mm x pitch 10mm 40mm x pitch 10mm Tool (40 taper) ARM Type Number of Tools 24 Tools 24 Tools ATC Type Swing Arm Swing Arm Tool Selection Bi-directional Bi-directional Maximum Length 250 mm 300 mm Maximum Diameter 80mm 80mm Maximum Each Tool Weight 6 Kg 7 Kg Tool Change Time (T - T) 2 second 2 second Tool Change Time (C - C) 4 second 4 second Spindle Spindle Taper 30 or Spindle speed rpm (std), 12000/18000 rpm(opt) Spindle Motor 5.5/7.5 KW 7.5/11 KW Air Supply Required 7Kg / square cm Power Supply Required 25 KVA 32 KVA(std), 45 KVA (option) Machine Weight 3800kgs 4200 kgs 7000 kgs Machine Dimension For Shipping 245*228*250 cm 300*228*255cm 337*228*255 cm Tilt Rotary Table Specifications Work Table Diameter (mm) Ø120 Ø200 Ø 320 Center Bore Diameter (mm) Ø 30 H7 Ø 30 H7 Ø 110 H7

4 Over all Height in Vertical (mm) 255 mm 340 mm 440 mm Table center Height in Vertical (mm) 150 mm 210 mm 255 mm Width Of T-Slot (mm) 10 H7 12 H7 12 H7 Width Of Guide Block (mm) 14 H7 18 H7 18 H7 Transmission Ratio 1 : 72 (Rotary), 1 : 90 (Rotary), 1 : 180 (Rotary), 1 : 120 (Tilt) 1 : 120 (Tilt) 1 : 180 (Tilt) Indexing Resolution (deg.) Tilting Angle Range -20 ~ ~ ~ 110 Maximum Rotation Speed (min-1) 27.8 rpm (Rotary) 22.2 rpm (Rotary) 11.1 rpm (Rotary) 16.7 rpm (Tilt) 11.1 rpm (Tilt) 5.6 rpm (Tilt) Load capacity (vertical / horizontal) 20Kg / 35Kg 50Kg / 100Kg 100Kg / 200Kg Indexing Accuracy (sec.) 30" Rotary 25" Rotary 15" Rotary 60" Tilt 50" Tilt 30" Tilt Repeatability (sec.) 4" Rotary 4" Rotary 4" Rotary 8" Tilt 8" Tilt 8" Tilt Specifications are subject to change without notice Standard Accessories BT/CAT/DIN-30/40 High Speed Servo System Electrical Cabinet with Heat Exchanger RS232 Interface Work Light Alarm Lamp Tool Box & Tools Leveling Blocks & Bolts Fully Enclosed Splash Guard Rigid Tapping Auger type chip conveyor Standard Spindle 10000rpm Chip Flushing System + Water Gun Spindle Coolant Nozzle System Spindle Air Blast Lubrication System Auto Power Off System Portable Hand Wheel (MPG) Operation Manual, Maintenance Manual Test Report In CD Format Optional Accessories Spindle Direct Drive (rpm) 12000, Spindle Built-in 24000, Chip Conveyor System Belt Type / Scrapper Type Coolant Through Spindle (CTS) 20 bar or 50 bar Linear Scale Oil Skimmer / Separator FAGOR Available Tool offset Probe

5 BARON-MAX MACHINE TOOLS Since 1976 KOAN CHO MACHINERY CO., LTD. P.O. Box Taichung, Taiwan, R.O.C No. 217 Tatun 7 th Street, Taichung, Taiwan, R.O.C Tel: , Fax: , baronmax@ms15.hinet.net