WOODStore.net. Thank You! Adobe Acrobat Reader Troubleshooting Guide. WOOD Store. Browse more than 1000 plans, projects, books, techniques, & more

Size: px

Start display at page:

Download "WOODStore.net. Thank You! Adobe Acrobat Reader Troubleshooting Guide. WOOD Store. Browse more than 1000 plans, projects, books, techniques, & more"

James Cole
5 years ago
Views:

WOODStore.net Browse more than 1000 plans, projects, books, techniques, & more Thank You! WOOD Store Customer Favorites Shop Tools & ccessories Thank you for ordering a WOOD magazine download.

It is unlawful to share this file with someone else or to reprint it in any form.

But you may still have problems or specific issues, such as printing and saving your downloadable file.

The files are very memory intensive because they include graphics, text, and photos. Close all other programs/applications and print directly out of the crobat Reader program, not your Web browser.

1 WOODStore.net Browse more than 1000 plans, projects, books, techniques, & more Thank You! WOOD Store Customer Favorites Shop Tools & ccessories Thank you for ordering a WOOD magazine download. We hope you enjoy being part of our online experience and that you have fun expanding your woodworking skills. Please remember that this copyrighted material is for your use only. It is unlawful to share this file with someone else or to reprint it in any form. Bill Krier ditor in Chief, WOOD magazine Indoor Furniture dobe crobat Reader Troubleshooting Guide If you can read this page, your crobat Reader program is working correctly! But you may still have problems or specific issues, such as printing and saving your downloadable file. Outdoor Furniture My printer won t print the text correctly lmost all printing problems are due to not enough free system resources memory. The files are very memory intensive because they include graphics, text, and photos. Close all other programs/applications and print directly out of the crobat Reader program, not your Web browser. Patterns are not printing full-size Make sure your printer is set to print at 100 percent and that print to fit is not checked. These settings are selected in the printer setup or printer options. Mission Furniture I can t save my file now that it s downloaded You must save the plan when you download the file. Download the file again, except this time try right-clicking on the red download button. menu window will open. Select Save target as or Save link as to save the file to your hard drive. Once saved, you can open it up with dobe crobat Reader. For more details on using dobe crobat Reader please visit our online help section at: Visit the WOOD Store at: WOODStore.net

DOWNLODBL ONLIN WOODWORKING PLNS http://www.woodonline.

It accepts up to a 16" square or round pot for showing off your colorful plantings.

2 DOWNLODBL ONLIN WOODWORKING PLNS patio-perfect Planter Spruce up your outdoor spaces with this 19"-tall, cedar-trimmed planter. It accepts up to a 16" square or round pot for showing off your colorful plantings. s an option, you can build the planter with scrollsawn trees shown above or add the optional Tuteur available as a separate plan (MD-00185). DP Copyright Meredith Corporation 2003 Page 1 of 8

3 6d galvanized finish nails 5 " H 2fl" H 45 2fl" H 1a SPLIN CUTTING DTIL #8 x 1 " stainless-steel F.H. wood screw " shank hole, countersunk #8 x 1" stainless-steel F.H. wood screws C 17fl" 2" D 13Œ" D 2" 16 " 17 " 1fi" notch 1 deep F 2 #8 x 1fi" stainlesssteel F.H. wood screws C " shank hole, countersunk " chamfer on bottom outside edge G 21 " " shank hole, countersunk D " chamfer along top edges H x 2fi" slot #8 x 1fi" stainlesssteel F.H. wood screw 13Œ" F C 2fi" stainless-steel F.H. wood screw B Ï" pilot hole deep B 3fi" 16 " 1 PLNTR XPLODD VIW Page 2 of 8

4 materials list FINISHD SIZ Part T W L Matl. Qty. sides 17 " 16 " MP 4 B support rails 1fi" 3fi" 16 " C 2 C wide stiles 2 17fl" C 4 D narrow stiles 2" 17fl" C 4 * top and bottom rails 3" 13Œ" C 8 F* center stiles fl" 4" 12 " C 4 G top trim 2fl" 21 " C 4 H* spline blanks " 2fl" 5 " C 4 *Parts initially cut oversize. See the instructions. Materials key: MP medium-density overlay (MDO) plywood, C cedar. Supplies: #8 1", #8 1 ", #8 1fi", and #8 2fi" stainless-steel flathead wood screws; 6d galvanized finish nails; spray adhesive; exterior-type adhesive. Blades and bits: Dado-blade set, 45 chamfer router bit. cutting diagram x 48 x 48" MDO plywood B B 1fi x 3fi x 36" Cedar C C C C x 3fi x 72" Cedar D D D D x 3fi x 72" Cedar *Plane or resaw to the thickness listed in the x 3fi x 60" Cedar (2 needed) Materials List. * F * F * F * F * H x 5fi x 96" Cedar G G G G x 3fi x 96" Cedar Page 3 of 8

Start with the box 1Cut the sides () to the size listed in the Materials List. Glue and clamp the sides together, overlapping the ends, where shown on Drawing 1.

5 Start with the box 1Cut the sides () to the size listed in the Materials List. Glue and clamp the sides together, overlapping the ends, where shown on Drawing 1. Use an exterior-type adhesive, such as Titebond II or polyurethane glue. Check for square. Then drill countersunk shank holes, where shown, and drive in the screws. 2Cut the support rails (B) to size. Using a dado blade in your tablesaw, cut a 1fi" notch 1 deep in the center of each rail. Glue and screw the rails together. Place the rails in the bottom of the box, and secure with screws, where shown. If you plan to make the tree onlays instead of the center stiles (F), be sure to keep these screws within 2" of the box s bottom so they ll be hidden by the bottom rails (). Stile assembly dd the trim 1Cut the wide stiles (C) and narrow stiles (D) to size. Mark a 1 " radius at the bottom of a narrow stile (either corner is fine), where dimensioned on Drawing 2. Bandsaw and sand the radius to shape. Using this stile as a template, mark the radius on a corner of each of the remaining narrow and wide stiles. Bandsaw and sand these pieces. 2Glue and clamp the narrow and wide stiles together, where shown on Drawing 1. Note that the stile assemblies (C/D) at adjacent corners are a mirror image. When the glue dries, screw the assemblies to the box, as shown in Photo, with their top edges flush. 3From -thick cedar, cut eight 3 14" pieces for the top and bottom rails (). Trim each rail s length to fit between the stile assemblies (C/D). Mark the rails and box so you ll install the pieces in the same locations later. With the stile assemblies clamped to the box (no glue), drill countersunk shank holes in the box, and drive in the screws. 4Using a flexible metal ruler or a thin strip of wood as a fairing strip, mark an arch on a rail (), where dimensioned on Drawing 2. Bandsaw and sand the arch to shape. Using this rail as a template, mark the arch on the remaining rails; then cut and sand them. Note: If you re planning to make the tree onlays instead of the center stiles (F), proceed to step 7. 5From -thick cedar planed to fl"-thick, cut four 4 16 " pieces for the center stiles (F). Mark centerlines on the stiles and rails (), where shown in Photo B. Position a top and bottom rail on a stile, and mark the rails contours on the stile, as shown. Identify the stile to match it to the rails, and keep the parts together. Repeat this process to mark the remaining stiles. Now, bandsaw the stiles ends to shape, and sand them to get a good fit between the rails. 6Mark the arches on the sides of a center stile (F), where dimensioned on Drawing 2. Bandsaw and sand the arches to shape. Use this stile to mark the arches on the remaining pieces; then cut and sand them. Page 4 of 8

2 SID VIW " chamfer along all edges on outside face 2" 13Œ" 4" 2 2" 3" C C No chamfer along this edge D 16 " F " chamfers 1" D No chamfer along this edge 17fl" B 1fi" R=1 " Center stile F R=1 "

6 2 SID VIW " chamfer along all edges on outside face 2" 13Œ" 4" 2 2" 3" C C No chamfer along this edge D 16 " F " chamfers 1" D No chamfer along this edge 17fl" B 1fi" R=1 " Center stile F R=1 " 7Remove the stile assemblies (C/D) from the box, and mark their locations. Sand all of the stiles and rails to 220 grit. Then chamfer the edges of the parts, where shown. 8Tree onlay option: Make four copies of the full-size tree pattern on the page 7. dhere them to a fl 4fi 34" piece of cedar with spray adhesive. Bandsaw the trees to shape, and sand their edges smooth. Chamfer along their outside edge, where shown on the pattern. Set the trees aside. Marked centerlines aligned Rails lign the rails and stile s centerlines and their top and bottom edges. Scribe each rail s arch contour onto the stile. Head for the top 1Cut the top trim pieces (G) to size. Miter-cut their ends, where shown on Drawing 1. Glue the pieces together to form a frame, secure with a band clamp, and check for square. 2Referring to the Shop Tip on page 6, cut a slot in each corner of the frame to receive the spline blanks (H), where shown on Drawing 1. Page 5 of 8

3Resaw a "-thick strip from a 2fl 24" piece of cedar for the spline blanks (H). Referring to Drawing 1a and the Cutting Diagram, miter-cut four 2fl 5 " splines from the strip.

Chisel the insidecorner edges to complete the chamfers. Now sand the frame. Finish and assemble 1Remove the support rails (B) from the box.

7 3Resaw a "-thick strip from a 2fl 24" piece of cedar for the spline blanks (H). Referring to Drawing 1a and the Cutting Diagram, miter-cut four 2fl 5 " splines from the strip. pply glue in the frame s slots, and insert the splines. When the glue dries, flush-trim and sand the splines. 4Chamfer the frame s top edges, where shown on Drawing 1. Chisel the insidecorner edges to complete the chamfers. Now sand the frame. Finish and assemble 1Remove the support rails (B) from the box. Brush two coats of paint or stain on the inside and outside surfaces of the box. (We used Olympic Solid Color Deck Stain, acrylic latex, Faulkland color.) Brush two coats of a wood tone finish on all of the other parts. (We used Wolman RainCoat Water Repellent, cedar tone.) 2Reattach the support rails (B) and stile assemblies (C/ D) to the box. Fasten the top and bottom rails () by drilling countersunk shank holes on the inside of the box and driving in #8 1 " screws. In the same way, fasten the center stiles (F) or trees using #8 1" screws. Centering the assembled top trim (G) on the box, glue and nail it in place. Finally, place a pot in the 3 box, and plant flowers. t a home center, we found a 16"-square, 13fl"-tall pot with a self-supporting rim that fits the box just right. For a pot less than 13fl" tall, elevate it by placing scrap cedar spacers on top of the support rails (B), as needed. Produced by Marlen Kemmet Written by Owen Duvall Project design: Kevin Boyle Graphic Design: Jamie Downing Illustrations: Kim Downing; Lorna Johnson Copyright Meredith Corporation 2003 SHOPTIP Big splines keep exterior miters looking fine Mitered workpieces subjected to the rigors of Mother Nature will surely open up unless you reinforce them in a substantial way. The best solution is to span the miters with hefty splines, like those for the planter s top trim (G), that offer plenty of facegrain gluing surface. To safely support your workpiece while cutting the deep slots for the splines, build a V-block jig, as shown above, right. Raise your "-thick tablesaw blade to the appropriate height for the required slot depth (2fi" for the planter). Position your fence to center the blade on the width of the jig s -thick cleat. Clamp the frame in the jig, and cut the slot, as shown at right. 45 The purchase of these plans does not transfer any copyright or other ownership interest in the plans, the design, or the finished project to the buyer. Buyer may neither reproduce the plans for sale nor offer for sale any copies of the finished project. 1" 8" 16" 90 11" 4" " shank hole, countersunk, with a Ï" pilot hole fi" deep #8 x 1 " stainlesssteel F.H. wood screw Complete your patio set with the dirondack Chair & Footrest plan (MD-00197) available separately. Page 5 of 8

8 FULL-SIZ TR PTTRN FULL-SIZ TR PTTRN " chamfer along outside edge " chamfer along outside edge To ensure full-size patterns are correct size, your printer should be set to print at 100% (not fit to page). Measure full-size patterns to verify size. fi 1" Page 7 of 8

9 FULL-SIZ TR PTTRN FULL-SIZ TR PTTRN " chamfer along outside edge " chamfer along outside edge To ensure full-size patterns are correct size, your printer should be set to print at 100% (not fit to page). Measure full-size patterns to verify size. fi 1" Page 8 of 8

10 3 ➊ Ways to better your woodworking from the editors of WOOD ll 26 Years of WOOD Updated for Tool Reviews 1,625 Shop Tips Magazine on one Disc! The easy searchable index takes you instantly to 810 Skill-building Techniques 305 Furniture Projects / 250 Shop Projects 920 Weekend Projects Order online at woodmagazine.com/dvdlibrary or by phone at ➋ New Woodworking Videos 50% OF F! When you buy two or more videos Buy one at regular price ($19 95 each) or save by purchasing two or more for $9 95 each. Limited time offer! Order today at woodmagazine.com/videodvds ➌ 1,300+ Shop-tested Woodworking Plans woodmagazine.com/plans D#WD0511

WOODStore.net. Browse more than 1,300 woodworking project plans, DVDs, back-issue collections, videos, tool reviews, books, & more.

WOODStore.net. Browse more than 1,300 woodworking project plans, DVDs, back-issue collections, videos, tool reviews, books, & more. Thank You! WOODStore.net Browse more than 1,300 woodworking project plans, DVDs, back-issue collections, videos, tool reviews, books, & more. Thank you for ordering this WOOD magazine download. We hope