Hodedah ASSEMBLY INSTRUCTION HI K78 (MICROWAVE CART)

Size: px

Start display at page:

Download "Hodedah ASSEMBLY INSTRUCTION HI K78 (MICROWAVE CART)"

Blake Osborne
6 years ago
Views:

1 ASSEBLY INSTRUCTION HI K8 (ICROWAVE CART) ~ Before assembly, please read the instructions ~ ~ Keep these instructions for future reference ~ ~ Follow these steps to assemble the icrowave Cart ~ FRONT VIEW BACK VIEW THIS INSTRUCTION BOOKLET CONTAINS IPORTANT INFORATION ABOUT ASSEBLY AND SAFETY. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2 A Left Side Panel pc 800 x 4 x 5mm B Bottom Panel pc 800 x 5 x 5mm Parts The parts of the product are packed in one box. There are inner box(es) or package(s) that included components and accessories required to complete the assembly C Back Strengthening Panel pc x x 5mm D Right Side Panel pc 800 x 4 x 5mm E I) ain Unit : P P I A E Hanger Panels 20 x 20 x 5mm F Small Rack Side Panel (Left) pc 0 x 40 x 5mm C Q D F H B G G Small Rack Base Panel pc x 8 x 5mm H Small Rack Side Panel (Right) pc 0 x 40 x 5mm II) Door & Drawer : L N I Top Panel pc 00 x 5 x 0mm J Left Door pc x x 5mm J K O K Right Door pc x x 5mm L Drawer Front Panel pc 0 x 40 x 5mm Drawer Side Panels 50 x 8 x 5mm N Drawer End Panels pc x 2 x 5mm O Drawer Base Panel pc 2 x 50 x 2.5mm P Back Panels 84 x x 2.5mm Q Adjust Panel pc x 50 x 5mm 2

Hardware And Accessories Plastic Dowel 8 x 25mm 2 2 CB Screw x 2mm CB Screw.5 x 2mm 4 CB Screw.

pcs 40 inifix 554 - Screw 4 pcs 4 Pvc Cap pcs 5 Handle 0mm - Pvc pcs P/H Screw 4 x 24mm 4 pcs P/H Screw 4 x 40mm 8 Nail 40 pcs Drawer Slide - A 50mm 20 Drawer Slide - B 50mm 2

bolts on the scale below or with a measuring tape before applying them in the parts Observe correctly the application and the position of each bolt accessory, as the step-by-step

3 Hardware And Accessories Plastic Dowel 8 x 25mm 2 2 CB Screw x 2mm CB Screw.5 x 2mm 4 CB Screw.5 x mm pcs 5 CB Screw 4 x 25mm CB Screw 4 x 5mm 8 pcs CSK Cap Screw x 40mm pcs 8 Shelf Support 4 pcs Door Support Spring 4 pcs 0 agnet Plate agnet 2 inifix Housing 4 pcs 40 inifix Screw 4 pcs 4 Pvc Cap pcs 5 Handle 0mm - Pvc pcs P/H Screw 4 x 24mm 4 pcs P/H Screw 4 x 40mm 8 Nail 40 pcs Drawer Slide - A 50mm 20 Drawer Slide - B 50mm 2 Plate Castor (Without Lock) Plate Castor (With Lock) Allen Key pc Hanging Rod 80mm 2 pc * Fix On Side Panels * Fix On Drawer Side Panels IPORTANT Check the measure of the bolts on the scale below or with a measuring tape before applying them in the parts Observe correctly the application and the position of each bolt accessory, as the step-by-step instructions, before applying them in the parts Required Or Recommended Tools Sample Screwdriver Sample Hammer Sample easuring Tape Sample Electric Screwdriver IPORTANT! The required or recommended tools for assembly are not supplied with the product.

4 - This product contains small components, please ensure that they are kept away from small children. - THIS INSTRUCTION BOOKLET CONTAINS IPORTANT SAFETY INFORATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. STOP DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, our customer service. We will gladly ship your replacement parts FREE of charge. Need Parts or Assistance? us at support@hodedah.com For prompt, reliable service; please have your assembly manual ready. 4

Thank you for purchasing from Hodedah To learn more about hodedah and our products visit READ BEFORE BEGINNING ASSEBLY - Read each step carefully.

5 Thank you for purchasing from Hodedah To learn more about hodedah and our products visit READ BEFORE BEGINNING ASSEBLY - Read each step carefully. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur. - ake sure all parts are included. ost parts are labeled or stamped on the raw edge. - Work in spacious area, preferably on a carpet, near the place the unit will be used. - Do not use power tools to assemble your furniture. Power tools may strip or damage the parts. HELPFUL HINTS - Call us if you need assistance. - ove your new furniture carefully, with two people lift and carry the unit to it's new location. - Never push, drag or pull your furniture (especially on carpet). Warranty Information Hodedah warrants this product to be free from defects in material and workmanship agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to be repair or replacement of defective parts and no assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way. To obtain warranty, purchaser must present original bill of sale. Components repaired or replaced warranted through the remainder of the original warranty period only. The defective components will be repaired or replaced without charge, subject to the terms and conditions described above. For help with assembly, identifying parts, product information or to order parts, please contact us : Call us at : onday - Friday :00am - 5:00pm Visit our website : 5

6 Place the drawer slide A onto the marking area shown at side panel A. Then tighten it with screw. 8 8 Insert 2 shelf support 8 into panel A & D's non-thru holes as shown. Pre - Assembly PANEL A Insert the PVC dowels to panel A & D's non-thru holes as shown, using hammer gently to tap them in. Place the drawer slide A onto the marking area shown at side panel D. Then tighten it with screw. PANEL E 8 8 PANEL D PANEL F PANEL H PANEL G Insert 4 inifix screw 2 to panel I base non-thru holes as shown. Insert the PVC dowels to panel C, E, F, G & H's non-thru holes as shown, using hammer gently to tap them in. Insert the 2 magnet to panel C non-thru holes as shown. PANEL I PANEL C

7 Door Panel Assembly Instruction Step * Insert 2 door support spring into panels J & K's non-thru holes as shown. * Fix 2 handles 5 into panel J & K's thru holes as shown. Tighten 2 screw from inner side of panel J & K into the handle holes. 5 5 J K Tighten magnet plate 0 to panel J & K as shown by using screw J K

8 ( ) Assembly Of Drawer N L - Place Panel on each side of Panel L as shown. - Then, tighten screw to Panel 's lower thru holes to fix them onto Panel L. - Next tighten screw to Panel 's upper thru holes to fix up to the Panel N. ( 2 ) - Flip drawer with bottom side up, place panel O onto groove at both panel 's. Then, nail the nails 8 provided with hammer on the border of panel as shown. The gap between 2 nails is about 00mm. L 8 O 20 ( ) L O 20 - Place the drawer slide B 20 with the small white roller facing outward and with other end tip touching panel L onto each bottok side (angle) edge of panel. Then tighten screws on each drawer slide B 20 (as shown). ( 4 ) - Flip the drawer over. - Tighten 2 screw from inner side of panel L into the handle 5 holes. 5 L COPLETED 8

9 Assembly Instruction Step Fix Panel A onto Panel B by inserting the dowels onto the respective non-thru holes at Panel B. Next, fix Panel C onto Panel A by inserting the dowels onto the non-thru holes at panel A. Use allen key to tighten screw from the thru-holes of panel A & B to non-thru hole of Panel B & C, as shown. A C B CSK Cap Screw x 40mm pcs Allen Key pc 40 Fix Panel E by inserting the dowels onto the respecting non-thru holes at Panel A. Use allen key to tighten screw from the thru-holes of panel A to non-thru hole of Panel E, as shown. Next, place Hanging Rod 24 onto non-thru hole at Panel E. E A 24 A E CSK Cap Screw x 40mm 40 Allen Key pc 24 Hanging rod 80mm pc CAUTION When inserting the Dowels to non-thru holes, don't push to hard. Otherwise, the side panels (A, C & E) may be damage.

10 Assembly Instruction Step 2 Fix Panel B & C onto Panel D by inserting the dowels onto the respective non-thru holes at Panel D. Use allen key to tighten screw from the thru-holes of panel B & D to non-thru hole of Panel A & C, as shown. C B D CSK Cap Screw x 40mm pcs Allen Key pc 40 Fix Panel G by inserting the dowels onto the respecting non-thru holes at Panel H. Use allen key to tighten screw from the thru-holes of panel H to non-thru hole of Panel G, as shown. Next, place Hanging Rod 24 onto non-thru hole at Panel H. Then, fix Panel G by inserting the dowels onto the respecting non-thru holes at Panel F. Use allen key to tighten screw from the thru-holes of panel F to non-thru hole of Panel G, as shown. H G 24 F CSK Cap Screw x 40mm 40 Allen Key pc 24 Hanging rod 80mm pc CAUTION When inserting the Dowels to non-thru holes, don't push to hard. Otherwise, the side panels (C, D & G) may be damage. 0

11 Assembly Instruction Step Fix the completed assemble of Panel F, G & H onto Panel D by inserting the dowels onto the respective non-thru holes at Panel D. Using Allen key to tighten screw from the thru holes of Panel D, one by one. F D G H CSK Cap Screw x 40mm pcs Allen Key pc 40 Place 2 Plate castor with lock 22 onto front side of Panel B. Then, tighten 4 screws 4 for each Plate castor 22 to Panel B. After that, place 2 Plate castor without lock 2 onto back side of Panel B. Then, tighten 4 screws 4 for each Plate castor 2 to Panel B CB Screw.5 x mm 2 Plate Castor (Without Lock) 22 Plate Castor (With Lock) CAUTION When inserting the Dowels to non-thru holes, don't push to hard. Otherwise, the side panels (F & H) may be damage.

12 Assembly Instruction Step 4 Lift up the main unit carefully and let it stand up properly. Fix Panel I onto Panels A & D. Align properly by inserting the dowel of Panel A & D onto non-thru holes of Panel I. Pushing & light tapping of Panel I to have Panel I, Panel A & panel D fix tightly. Insert 4 inifix housing 2 onto non-thru holes at Panel A & D. Use Allen key to tighten 4 minifix 2 housing from the non-thru holes of Panel A & D. O A D 2 inifix Housing 4 pcs Allen Key pc Place 2 Back Panels O onto back of the main unit. Then, align them properly for nailing. Then, use hammer to nail the 4 nails 8 one by one at centre of 4 side edges. Gap between 2 nails should be about 00mm for all. 8 Hammer P P 8 Nail 2 pcs 2

13 Assembly Instruction Step 5 Put adjusting panels Q onto shelf supports as shown. Take Drawer and slide them (the white rolles at drawer slide at both side of drawers are to go into the track of the slides at each side panel) all the way gently. 4 L Q Cover all thye screw and minifix housing 2 's head with Pvc cap 4 provided by pushing cover's stem onto the hole of screw heads one by one for all screws. 4 Pvc Cap pcs Insert Door fitting at the lower of Door Panel J onto the non-thru hole at the Panel B. Then, push the door fitting at the upper of Door panel J & insert the door fitting onto the non-thru hole at the Panel B. Repeat same step for the Door Panel K. J K

14 Completion In the interest of our environment please dispose of all packaging thoughtfully. 4

Hodedah. HIK 77 L23 5 8'' X D16 6 8'' X H42 1 8''

Hodedah. HIK 77 L23 5 8'' X D16 6 8'' X H42 1 8'' HIK 77 L3 5 '' X D6 6 '' X H4 '' PART & HARDWARE LIST 4 7 0 3 3 6 4 5 5 A PLASTIC DOWEL M X 5MM M CAP 4 B CB SCREW M3.5 X MM N 0 MAGNET PLATE C CB SCREW M4 X 5MM O 0 MAGNET D CB SCREW M4 X 35MM P CB M3