Fixings. Products - Fixings.
|
|
- Lesley Lloyd
- 6 years ago
- Views:
Transcription
1 Fixings Our range of fixing products cater for every drywall need, ensuring simple yet secure fixing of plasterboard and metal framing. The range includes Gyproc screws, engineered for board-to-metal, board-to-timber or metal-to-metal fixing; high performance screws for use with the British Gypsum FireCase encasement system and special Gypframe fixings for ceiling, lining and floor systems
2 Technical support: T F E bgtechnical.enquiries@bpb.com Fixings index Gyproc fixing products Glasroc fixing products Gyproc Drywall 538 Glasroc FireCase 542 Gyproc Collated Drywall 538 Gyproc Drywall Timber 539 Gypframe fixing products Gyproc Collated Drywall Timber 539 Gypframe MF11 Nut and Bolt 542 Gyproc Jack-Point 540 Gypframe GL11 GypLyner Anchors 543 Gyproc Wafer Head Drywall 540 Gypframe SIF5 Floor 543 Gyproc Wafer Head Jack-Point 541 Gyproc Nailable Plugs
3 Gyproc Drywall cross-heads. Supplied with screw driver bits Ideal for fixing C studs (and associated framing) up to 0.79 thick and I stud framing up to 0.5 thick. The length of screw selected for a given boarding configuration should be sufficient to give a nominal 10 penetration into metal framing. Gyproc Collated Drywall cross-heads. Strips of 50 Collated Drywall supplied in boxes of 1000 screws (20 strips) Ideal for fixing C studs (and associated framing) up to 0.79 thick and I stud framing up to 0.5 thick. The length of screw selected for a given boarding configuration should be sufficient to give a nominal 10 penetration into metal framing. 540
4 Technical support: T F E bgtechnical.enquiries@bpb.com Gyproc Drywall Timber Gyproc Collated Drywall Timber cross-heads. Supplied with screw driver bits. Ideal for fixing plasterboards to timber framing. The length of screw selected for a given board configuration should be sufficient to give a nominal 25 penetration into timber framing. cross-heads. Strips of 50 Collated Drywall Timber supplied in boxes of 1000 screws (20 strips). Ideal for fixing plasterboards to timber framing. The length of screw selected for a given board configuration should be sufficient to give a nominal 25 penetration into timber framing. 541
5 Gyproc Jack-Point Gyproc Wafer Head Drywall Corrosion resistant, selfdrilling cross-heads. The length of the screw selected for a given boarding configuration should be sufficient to give a nominal 10 penetration into steel framing. Supplied with screw driver bits. Ideal for fixing plasterboards to stud framing 0.8 thick or greater and I Studs greater than 0.55 thick. screws with wafer cross-head. Supplied with screw driver bits. Ideal for metal-to-metal fixing up to 0.79 thick and I stud framing up to 0.5 thick. 542
6 Technical support: T F E bgtechnical.enquiries@bpb.com Gyproc Wafer Head Jack-Point 13 Gyproc Nailable Plugs Similar to Gyproc Wafer Head, but with self-drilling points. Supplied with screw driver bits included. Ideal for metal to metal fixing 0.8 thick or greater and I studs greater than 0.55 thick. Combination of masonry nail and plastic wall fixing with expanding tip and countersunk head. Designed for secondary fixing of Gyproc ThermaLine laminates to masonry backgrounds. 543
7 Glasroc FireCase Gypframe MF11 Nut and Bolt 6 x 70 The screws have a unique head design that countersinks into the board allowing easy fixing. Designed for securing Gypframe MF8 Strap Hanger to Gypframe MF Soffit Cleat. Specifically designed for the fixing of Glasroc FireCase S specialist board in the British Gypsum FireCase system. For use in the British Gypsum CasoLine MF ceiling system. 544
8 Technical support: T F E bgtechnical.enquiries@bpb.com Gypframe GL11 GypLyner Anchors Gypframe SIF5 Floor Haer-in fixing with wide flange to avoid the need for a separate washer. Designed especially for fixing Gypframe GL2 or GL9 Brackets to masonry walls and concrete soffits, subject to loading. Electro-zinc plated, self-tapping screws with countersunk heads. For use in the GypFloor SILENT acoustic floor system. Suitable for fixing timber flooring through Gyproc Plank into Gypframe SIF Floor Channel flange. 545
Sound insulating floor system
Sound insulating floor system is specified in residential conversion or improvement work to upgrade an existing timber joist floor. It is also used in new-build to meet the acoustic requirements of national
More informationTimber joist. Timber joist ceilings and separating / compartment floors. Timber joist.
ceilings and separating / compartment floors Ceilings to timber joist floors are an established form of ceiling construction, widely used in both new housing and refurbishment. Separating / compartment
More informationSound insulating floor system
GypFloor SILENT GypFloor SILENT Sound insulating floor system GypFloor SILENT is specified in residential conversion or improvement work to upgrade an existing timber joist floor. It is also used in new-build
More informationFireCase. Frameless structural steel encasement system. FireCase.
FireCase FireCase Frameless structural steel encasement system FireCase frameless encasement system provides a high quality cladding to structural steel, and offers high levels of fire protection. The
More informationGyproc Proflex Access Panels - Installation Guidance Notes
Gyproc Proflex ccess Panels - Installation Guidance Notes The following notes are intended as guidance only, depicting the basic sequence of installation. In practice, consideration should be given to
More informationExpandet Drywall Screws ensures fast and effective installation. Expandet Drywall Screws are CE-marked and optimized for professional use.
Expandet Drywall Screws Expandet Drywall Screws ensures fast and effective installation, and are available in a wide range for both steel and timber substructures. Drywall Screws are CE-marked and optimized
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationCove and ceiling roses A stylish finish to any room
Cove and ceiling roses A stylish finish to any room Cove Gyproc coving is the first choice when it comes to adding value to a home. Traditional paper-faced plaster cove complements any room in any style
More informationCONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A2-304 2 2 NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame
More informationCove and Cornice Decorative room features
GYPROC Cove and Cornice Decorative room features 1 2 3 4 1 2 3 4 Gyproc Cove with one Cornice Strip on ceiling and wall. Gyproc Cove with twocornice Strips on ceiling and wall. Gyproc Cove with one Cornice
More informationColumn and Beam Fire Protection SYSTEMS 335 INSTALLATION 337 GENERAL REQUIREMENTS 337 FRAMING 337
SYSTEMS 335 INSTALLATION 337 GENERAL REQUIREMENTS 337 FRAMING 337 PLASTERBOARD LAYOUT 337 PLASTERBOARD FIXING 337 CONSTRUCTION DETAILS 341 Column and Beam Fire Protection Column and beam protection systems
More informationWindload Post 9100/9600/9900 Installation Instructions
Windload Post 9100/9600/9900 Installation Instructions Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com Wayne-Dalton Corp. P.O. Box 67 Mt. Hope,
More informationSiniat GTEC Drywall Fixings (53BF)
Siniat GTEC Drywall Fixings (53BF) GTEC Screws are designed specifically for use with drywall systems. All screws have extra sharp points for fast penetration and hardened threads for improved grip. GTEC
More informationWINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for
More informationFASTENERS & ACCESSORIES
Staples General purpose staples to suit most popular staple guns. Particularly useful for stapling external angles and PVC mouldings to timber frames. PlasterX staples are designed to fit PLASTERX Arrow
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationNONIUS ceiling SUSPENSION SYSTEM
NONIUS ceiling SUSPENSION SYSTEM QUICK HANGER SYSTEM CEILING AND WALL FIXINGS INSPECTION HATCHES ACCESSORIES PRODUct catalogue 2013 INDEX 6...NONIUS ceiling SUSPENSION SYSTEM 22... QUICK HANGER SYSTEM
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationHorizontal Shaft Wall
SYSTEMS 317 INSTALLATION 319 GENERAL REQUIREMENTS 319 FRAMING 319 PLASTERBOARD LAYOUT 320 PLASTERBOARD FIXING 320 CONSTRUCTION DETAILS 321 Horizontal Shaft Wall Horizontal Shaft Wall is constructed in
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationStraight Stringer Installation Instructions
Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets
More informationULTRA SPACE SAVER Installation Instructions
Installation Instructions The Ultra Space Saver has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationAdjustable Countertop Installation
Adjustable Countertop Installation Applies to Models: A1, A2, A3, A4, A5, & A6 Required Tools: Stud Finder, Level 1/4 deep well socket, Screwdrivers, Tape Measure, Drill and Drill Bits Language of origin:
More informationGYPROC. Cove and Cornice Decorative room features....made easy
GYPROC Cove and Cornice Decorative room features...made easy 1 2 3 4 1 2 3 4 Gyproc Cove with one Cornice Strip on ceiling and wall. Gyproc Cove with two Cornice Strips on ceiling and wall. Gyproc Cornice
More informationInstallation Instructions. Single. READ these Installation Instructions CAREFULLY! sliding door unit. Before you start: WHAT YOU NEED TO KNOW FIRST.
CS Cavity Sliders Pty. Ltd. CS FRMELESSGLSS (O.D. 1998). 60230/U / ZNI040-07.2018 Installation Instructions Single sliding unit. Before you start: RED these Installation Instructions CREFULLY! Other CS
More informationDowel-type fasteners. Timber Connections. Academic resources. Introduction. Deferent types of dowel-type fasteners. Version 1
Academic resources Timber Connections Dowel-type fasteners Version 1 This unit covers the following topics: Deferent types of dowel-type fasteners Introduction There are four criteria designers should
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationSINGLE PIECE MASONRY HANGERS
SINGE PIECE MASONRY ANGERS TECNICA DATA SEET The FM Single Piece Joist anger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm². They are
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationSingle. HowTO install this. READ this HowTO CAREFULLY! sliding door unit. (It could save you lots of work!) Before you start:
Cavity Sliders Limited. CS LUSELED (O.D. 1986). 60076 / ZNI015-02.2018 HowTO install this Single sliding door unit Before you start: RED this HowTO CREFULLY! (It could save you lots of work!) Other CS
More informationTop Closure Kit Accessory for Music Library System
Assembly Instructions Top Closure Kit Accessory for Music Library System Contents Required Tools.....................................2 Installation Requirements............................2 Fasteners -
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationWash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
More informationInstallation Instructions 800/800W/855/G2-800 Handrails
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationTOGGLER Specialty Anchors
TOGGLER Specialty Anchors Description All TOGGLER Specialty Anchors can be used in any material (concrete, plywood, paneling, drywall, etc.) of any thickness above their minimum grip range. All TOGGLER
More informationA. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationInstallation Instructions
Please read all instructions before installing Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationPRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
More informationExtra Wide Designer Lockers Series Installation Instructions
Extra Wide Designer Lockers 20000 Series Thank you for selecting the 20000 Series Extra Wide Designer Lockers. We are confident that the quality and construction of the lockers will prove to be a good
More informationEzyBrace For Light Steel Frame Systems
EzyBrace For Light Steel Frame Systems Systems for use with light steel framing have been updated in March 2017 to offer improved simplicity and efficiency. Key changes include: CORNER FASTENER PATTERNS
More informationSCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationBARN DOOR HARDWARE KIT
INSTALLATION GUIDE Main Components x1 Rail x5 Wall Spacer x2 Anti-jump Block x2 Bent Strap x1 Right Stopper x1 Left Stopper x5 5/16 (8mm x 60mm) Carriage Bolt x5 5/16 (8mm x25mm) Anchor x5 5/16 (8mm x
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationRecommended Tools: Before You Begin:
Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line Elec. Drill w/ Bits (Masonry Drill, Bits. & Anchors maybe required
More informationCloset Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
More informationDrive Pins. Powder Actuated Systems. Powder Actuated Systems
Standard Drive Pins for Concrete, Masonry and Steel Drive Pins designed for fastening to standard strength concrete, masonry and steel up to a maximum of 8mm. Part No Drive Pin Length (thickness to steel)
More informationFIB-R-MAX STANDARD SINGLE DOOR
FIB-R-MAX STANDARD SINGLE DOOR Style 1, 4, 4.4 and 11 Unitized Single Door Assembly By Fib-R-Max for Existing Openings 1. Set the crate, which will be marked with the specific opening location, at the
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationInstallation Instructions 1200/1255/G Handrails International Compliant
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationWall mounting bracket
Install Manual Wall mounting bracket Please read this manual carefully before operating your set and retain it for future reference. OSW200 P/NO : MFL63640578 (1502-REV01) www.lg.com COMPONENT Install
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationULTRA SPACE SAVER SQUARED Installation Instructions
Installation Instructions The Ultra Space Saver Squared has several steps for installation. Note that the single and double sided setups and parts are different. Make sure you follow the instructions according
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationInstallation Instructions. 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC & UL-10C
Installation Instructions 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC 7-2-1997 & UL-10C Door Requirements: Consult the door manufacturer to make sure that the doors are qualified
More informationLocker Pedestal Installation Instructions
Locker Pedestal Installation Instructions LK-PED-INST-0314r1 Parts List Single Pedestal Back to Back Pedestal Horizontal Support Tube TS-169 Post Flange TS-190 Post Cap Fasteners Provided: #8 x ¾ round
More informationSentinel Electronic Safe Installation Guide
Sentinel Electronic Safe Installation Guide by Rev 07/12/2004 P/N 100020 Table of Contents 1. OVERVIEW...3 2. SAFE INSTALLATION...3 2.1. TOOLS REQUIRED...3 2.2. SELECTING THE MOUNTING LOCATION...3 2.3.
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationSuperMount Series Installation instructions for SuperMount 46, 68 & 80 wall structures Bill Of Materials
SuperMount Series Installation instructions for SuperMount 46, 68 & 80 wall structures Bill Of Materials A (4) Extension Frame B (4) Telescoping Extension C (4) Cross Brace D (3) 2"x8"x84" Wall Board E
More informationmethod of build Komfire-75 partitioning system 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims KOMFORT
821 811 342 821 835 853 863 840 12.5mm Plasterboard 837 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims Note: For clarity the cavity infill has not been shown 854 342
More informationSLOANE DARK LEANING BOOKCASE
SLONE DRK LENING BOOKSE HRDWRE 4 - large bolts 10 - small bolts 1 - small screw 4 - medium screws 1 - large screw 2 - wall fittings 1 - wall strap 1 - plastic anchor 8 - wood dowels Thank you for purchasing
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationInstallation Instructions 2000/2000W/G Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationPowder Actuated Fasteners - Drive Pins
122 Drive Pins Standard Pins Drive pins with a.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured
More informationInstallation Instructions for: Saris Cycle Aid. Saris Cycle Air. Saris Cycle Air HD
Installation Instructions for: Saris Cycle Aid Saris Cycle Air Saris Cycle Air HD A. Setbacks Parallel Wall or object Setbacks: Both sides of the Saris Cycle Aid should be at least 48 from walls or other
More informationOverall Dimensions - Model: 1018-A. 575mm. 1400mm. 600mm. 2000mm
Overall Dimensions - Model: 1018-A 1400mm 575mm 600mm 2000mm Contents (Not to scale) Please double check all components are present and quantities are correct before beginning assembly x8 Straight Felt
More informationInstallation Manual MODEL ANE-42
Installation Manual MODEL ANE-42 GET TO KNOW YOUR UNIT 1 2 1. CROSS BRACES 2. SIDE BRACKETS - Stud Finder - 12-14 Level - Tape Measure - Small Flathead Screwdriver Tools Needed: - Electric Drill (with
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationNX7 SERIES 5-1/2 HANDRAIL
STORAGE & HANDLING The handrails are shipped unassembled. Upon receipt, immediately check all material for any damage that may have occurred in transit and verify that all of the items and quantities are
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More information5 ACCESS PANEL INSTALLATION SPACER *SLIDE TO LOCATION OF FASTENER DURING INSTALLATION OF EACH FASTENER
1/2 K.O. (3/8 K.O. on 165 with factory supplied 3/8 flex conduit fitting) TR - Trim Flange Side Blocking Install Method Secure fixture to structure following instructions below: 1. Remove lens and internal
More informationAssembly Instructions for Model: VMPL3
Assembly Instructions for Model: VMPL3 Thank you for choosing a Sanus Systems VisionMount Wall Mount. The VMPL3 is designed to hold 27-84 Flat Panel LCD or Plasma Displays weighing up to 280 lbs. It will
More informationeb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233
eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 Dr. Jason E. Charalambides fkqolar`qflk Heavy timber construction consists
More informationPlasterboard Ceiling Systems
Plasterboard Ceiling Systems 400C Issue 1 2 Plasterboard Ceiling Systems Contents Standard Ceilings Design...3-7 Introduction... 3 Fire Ratings... 3 Systems Mass... 3 Decoration... 3 General Construction
More informationThanks for shopping with Improvements! Deluxe 10 Closet Organizer (12 deep) Item #461609
Thanks for shopping with Improvements! Deluxe 10 Closet Organizer (12 deep) Item #461609 To order, call 1-800-642-2112 West Chester, OH 45069 0114 If you have questions regarding this product, call 1-800-642-2112
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationINSTALLATION GUIDE. 5" Balustrade System
5" Balustrade System PARTS LIST ITEM QTY A PORCH POST INSTALLATION KIT (PPK6) (SEE STEP 3C) 5 1/2" x 5 1/2" Trim Collar 2 2" Wide x 1 1/2" x 2" Angle Bracket 4 MATERIALS NEEDED INSTALLATION GUIDE #14 x
More informationF I X I N G B R O C H U R E
F I X I N G B R O C H U R E Joist Hangers Joist Hangers on Steel Beams Fixing Masonry Hangers Speedy Joist Hangers Lateral Restraint Straps Roof Tie Down Straps Herring Bone Joist Strut Bat 'U' Nail Plate
More informationLevel, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular & Phillips)
Delta Door Canopy Installation Instructions Recommended Tools: Before You Begin: Level, Pliers, 3/8" Electric Drill, Carpenters Square, Tape Measure, Metal Hack Saw, Silicone Caulking, Screw Drivers (Regular
More informationSLOANE WHITE / COBALT / CRIMSON LEANING DESK
SLONE WHITE / OLT / RIMSON LENING ESK SSEMLY HRWRE Missing hardware? Please call 800.606.6387 for replacements. 2 - large bolts 6 - small bolts 10 - wood dowels 8 - spring washers 8 - flat washers 20 -
More information