VDE tools 428 Pliers 430 Screwdrivers 434 Assortments and sets 436 Safety tools 440 Tool chest 444

Transcription

1 Product roup index Hand tools VDE tools 428 Pliers 430 Screwdrivers 434 Assortments and sets 436 Safety tools 440 Tool chest 444 Standard tools 446 Pliers 448 Electronic/precision mechanic's tools 452 Screwdrivers 453 Bits, holders and adapters 456 Assortments and sets 459 Measurin and markin 465 Basic tools 469 Tool chest 473 Wire strippin tools 480 Strippin tools 484 Strippin tools for counication technoloy

2 Heavy-duty insulation up to 1000 V. Tested and approved VDE tools from Klauke. Every Klauke VDE tool is produced and tested as per the latest directives of the safety test methods accordin to EN/IEC (VDE 0682 Part 201). All VDE tools are rated to 1500 volt DC and 1000 volt AC. Klauke pliers have been ranted the IF Product Desin Award. VDE Pliers. VDE Side cutters. VDE Cable cutters. VDE Screwdrivers. The impact-resistant hard core optimises the durability of the tools. The handle also offers the option of usin the screwdriver as a lever. Another special feature is the profile stamp that clearly identifies the tools. 428

3 Everythin under control, even under voltae. Pliers with heavy-duty hand protection to protect aainst flyin sparks. A cold impact test (at -25 C), a test of the adhesive strenth of the insulation (with 500 N) and a sinle voltae test in a water bath (10,000 V/AC) are carried out in accordance with EN/IEC component safety handle. Benefits: The heavy-duty hand protection provides added safety when workin under voltae. Guaranteed protection even under extreme conditions. Non-slip overlay thanks to matched elastomers. Correct turnins for +/- applications. Special blade shape especially for +/- applications Benefits: Damae to screw heads by wron blades is avoided. The head profile causes a torque-dependent, compared with Philips screws lower axial counter force which drives the screwdriver from the slot prior breakin of the screw. More on Pae 434. More force, less effort for quick cuts. Cuttin surfaces with special flute section. Extended cuttin edes. Benefits: The extended cuttin edes combined with the special flute section allow quick and easy cuts with comparatively little effort. Handle with all the triins: Eronomic desin, impact protection and nameplate. Eronomically-desined handle with impact protection. Interated nameplate on the inside of the handle. Benefits: Improved force transmission durin work. No damae to the tools when dropped. No confusion with other tools thanks to simple identification. 429

4 Strippin and cuttin of copper and aluminium cables Holds flat and round material Holds flat and round material Hand tools VDE tools VDE Cable cutters New wave profile for loner service life Strippin and cuttin of copper and aluminium cables Cable cross-section up to 50 ², cable up to Ø 16 (KL010160IS) Cable cross-section up to 70 ², cable up to Ø 25 (KL010210IS) Adjustable joint Adjustable joint Dimensions weiht Packin VDE Cable cutters KL010160IS VDE Cable cutters KL010210IS VDE Heavy-duty combination plier With combination spanner from (M8 - M10) Holds flat and round material Blades for hard and soft wires Dimensions weiht Packin VDE Heavy-duty combination plier VDE Heavy-duty combination plier VDE Heavy-duty combination plier KL020165IS KL020180IS KL020205IS VDE Heavy-duty combination plier anled With combination spanner from (M8 - M10) Holds flat and round material Blades for hard and soft wires Anled head Anled head Dimensions weiht Packin VDE Heavy-duty combination plier anled KL026205IS

5 Soft copper and aluminium, plastic up to Ø 5.0 / 6.0 / 7.0 Cable - multiconductors, sinle core and stranded Ø 4.0 Inductive hardened precision cuttin edes for fine wires Hand tools VDE tools VDE Side cutters New wave profile for loner service life Soft copper and aluminium, plastic up to Ø 5.0 / 6.0 / 7.0 Hard wire, wire cable fibre, steel wire up to Ø 1.7 / 2.0 / 2.5 Cable - multiconductors, sinle core and stranded Ø 8 / 11 / 13 Hih cuttin performance on hard and soft wires Hih cuttin performance on hard and soft wires Dimensions weiht Packin VDE Side cutters KL040145IS VDE Side cutters KL040160IS VDE Side cutters KL040180IS VDE Side cutters 4 Functions Cuttin - strippin - crimpin - bendin Cable - multiconductors, sinle core and stranded Ø 4.0 Hard wire and steel wire up to Ø 1.0 Soft copper and aluminium wire, plastic up to Ø 2.0 Strippin 1.5 ² and 2.5 ² of sinle and stranded conductors Inductive hardened precision cuttin edes for fine wires Inductive hardened precision cuttin edes for fine wires Dimensions weiht Packin VDE Side cutters KL042190IS VDE Electricians heavy duty side cutter New wave profile for loner service life Piano wire up to Ø 2.5 Piano wire up to Ø 2.5 Inductive hardened precision cuttin edes for fine wires Eronomically-shaped handle for improved power transmission 18 anled cutter head Dimensions weiht Packin VDE Electricians heavy duty side cutter KL044200IS

6 Hard wire, wire cable fibre, steel wire up to Ø 2.6 / 2.8 / 3.5 Soft copper and aluminium wire, plastic up to Ø 2.5 With wire cutter for hard and soft wires Soft copper and aluminium wire, plastic up to Ø 2.5 With wire cutter for hard and soft wires Hand tools VDE tools VDE Heavy duty side cutters New wave profile for loner service life Increased force transmission throuh eronomically formed shank Hard wire, wire cable fibre, steel wire up to Ø 2.6 / 2.8 / 3.5 Piano wire, sprin steel wire up to Ø 2.2 / 2.5 / > 3.0 Medium-hard wire up to Ø 3.7 / 4.0 / 4.5 Hih cuttin performance on hard and soft wires Hih cuttin performance on hard and soft wires Dimensions weiht Packin VDE Heavy duty side cutters KL045180IS VDE Heavy duty side cutters KL045200IS VDE Heavy duty side cutters KL045240IS VDE Telephone pliers, straiht With combination spanner from (M8 - M10) Soft copper and aluminium wire, plastic up to Ø 2.5 Medium-hard wire, nails, wire nails up to Ø 3.2 Hard wire and steel wire up to Ø 2.2 With wire cutter for hard and soft wires Serrated jaws Dimensions weiht Packin VDE Telephone pliers, straiht KL050205IS VDE Telephone pliers, bent With combination spanner from (M8 - M10) Soft copper and aluminium wire, plastic up to Ø 2.5 Medium-hard wire, nails, wire nails up to Ø 3.2 Hard wire and steel wire up to Ø 2.2 With wire cutter for hard and soft wires Serrated jaws 45 anled flat-round jaws Dimensions weiht Packin VDE Telephone pliers, bent KL055205IS

7 Cable - multiconductors, sinle core and stranded 10.0 ² Ratchet adjustment VDE-tested for safe workin on live conductors up to 1000 V Hand tools VDE tools VDE Wire stripper Cable - multiconductors, sinle core and stranded 10.0 ² Cable - multiconductors, sinle core and stranded Ø 5.0 With ajustment screw With ajustment screw Dimensions weiht Packin VDE Wire stripper KL060160IS Waterpump plier 1000 V Jaw width 50 Interated hand protection Ratchet adjustment Box joint Teeth additionally inductive hardened Dimensions weiht Packin Waterpump plier 1000 V KL070250IS Automatic wire stripper, 1000 V Flexible and solid conductors from ² Flexible and solid conductors from ² VDE-tested for safe workin on live conductors up to 1000 V Adjustable lenth stop from 5-12 Dimensions weiht Packin Wire stripper 1000 V KL760180IS

8 Hand tools VDE tools VDE Screwdrivers for Torx screws Dimension Blade lenth weiht pcs. VDE-Torx-Screwdrivers KL150TX10IS 100 x Tx VDE-Torx-Screwdrivers KL150TX15IS 100 x Tx VDE-Torx-Screwdrivers KL150TX20IS 100 x Tx VDE-Torx-Screwdrivers KL150TX25IS 100 x Tx VDE-Torx-Screwdrivers KL150TX30IS 100 x Tx VDE Screwdriver for slotted screws Dimensions Blade lenth weiht pcs. VDE Slotted screwdriver KL IS 75 x 2,5 x 0, VDE Slotted screwdriver KL IS 100 x 3,0 x 0, VDE Slotted screwdriver KL IS 100 x 3,5 x 0, VDE Slotted screwdriver KL IS 100 x 4,0 x 0, VDE Slotted screwdriver KL IS 125 x 5,5 x 1, VDE Slotted screwdriver KL IS 150 x 6,5 x 1, VDE Slotted screwdriver KL IS 175 x 8,0 x 1, VDE Screwdriver for cross-slotted screws (Phillips) PH1, PH2, PH3 Dimension Blade lenth weiht pcs. VDE Cross slotted screwdriver Phillips PH VDE Cross slotted screwdriver Phillips PH VDE Cross slotted screwdriver Phillips PH KL110PH1IS 80 x PH KL110PH2IS 100 x PH KL110PH3IS 150 x PH

9 Hand tools VDE tools VDE Screwdrivers for cross-slotted screws Pozidriv PZ1, PZ2, PZ3 Dimension Blade lenth weiht pcs. VDE Cross slotted screwdriver Pozidriv PZ VDE Cross slotted screwdriver Pozidriv PZ VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 80 x PZ KL120PZ2IS 100 x PZ KL120PZ3IS 150 x PZ VDE Screwdrivers for plus/minus screws Z1, Z2 Plus/Minus-Blade for switch ears Dimension Blade lenth weiht pcs. VDE-Plus/minus screwdriver KL130PM1IS 80 x Z VDE-Plus/minus screwdriver KL130PM2IS 100 x Z VDE Screwdrivers for hexaon head screws Dimensions for thread weiht pcs. VDE-Hexaon head screwdriver VDE-Hexaon head screwdriver VDE-Hexaon head screwdriver VDE-Hexaon head screwdriver VDE-Hexaon head screwdriver VDE-Hexaon head screwdriver KL14055IS 5,5 M KL14060IS 6 M KL14070IS 7 M KL14080IS 8 M KL140100IS 10 M KL140130IS 13 M

10 Slotted screws 3.0 x 0.8 Sinle-pole Hand tools VDE tools Voltae tester with heavy duty handle, sinle-pole VDE V - 250V Slotted screws 3.0 x 0.8 For voltae detection Sinle-pole With heavy duty handle Dimensions Blade lenth weiht Sinle-pole voltae tester KL19073IS 3,0 x 0, pcs. VDE Plier set, 3-pce. VDE Plier set, 3-pce. KL303IS Scope of supply Pae VDE Heavy-duty combination plier KL020180IS 430 VDE Side cutters KL040160IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Plier set, 4-pce. VDE Plier set, 4-pce. KL304IS Scope of supply Pae VDE Heavy-duty combination plier KL020180IS 430 VDE Side cutters KL040160IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Wire stripper KL060160IS

11 Hand tools VDE tools Plier/screwdriver set, 4-pce. Plier/screwdriver set, 4-pce. KL305IS Scope of supply Pae VDE Cable cutters KL010160IS 430 VDE Wire stripper KL060160IS 433 VDE Slotted screwdriver KL IS 434 VDE-Plus/minus screwdriver KL130PM1IS 435 Plier/screwdriver set, 6-pce. Plier/screwdriver set, 6-pce. KL306IS Scope of supply Pae VDE Telephone pliers, straiht KL050205IS 432 VDE Side cutters KL040160IS 431 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Screwdriver set, 3-pce. VDE Screwdriver set, 3-pce. KL391IS Scope of supply Pae VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Slotted screwdriver KL IS

12 Hand tools VDE tools VDE Screwdriver set, 3-pce. VDE Screwdriver set, 3-pce. KL392IS Scope of supply Pae VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 435 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ2IS 435 VDE Slotted screwdriver KL IS 434 VDE Screwdriver set, 3-pce. VDE Screwdriver set, 3-pce. KL393IS Scope of supply Pae VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Sinle-pole voltae tester KL19073IS 436 VDE Screwdriver set, 6-pce. VDE Screwdriver set, 6-pce. KL390IS Scope of supply Pae VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 Sinle-pole voltae tester KL19073IS

13 Slotted screwdriver 75 x 2.5 / 100 x 4.0 / 125 x 5.5 Secure rip of blades in the handle by automatic lockin to prevent unintentional withdrawall Hand tools VDE tools VDE Screwdriver set, 6-pce. Slotted screwdriver 75 x 2.5 / 100 x 4.0 / 125 x 5.5 Voltae testers Sinle component handle Screwdriver Philips PH1 + PH2 VDE Screwdriver set, 6-pce. KL399IS Klauke E-smart box 12-pce. 12 IEC Exchaneable blade set for all applications incl. contactless voltae tester Secure rip of blades in the handle by automatic lockin to prevent unintentional withdrawall Snap-on rotatin cap and soft coatin zone for use as a precision tool Blades can be re-ordered individually Safety tools acc. to EN/IEC all screwdrivers checked with 1,000V Dimensions weiht Packin Klauke E-smart box KL300IS Scope of supply Pae Blade 2.5 x 0.4 KLE300IS1 480 Blade 3.5 x 0.6 KLE300IS3 480 Blade 4.0 x 0.8 KLE300IS4 480 Blade 5.5 x 1.0 KLE300IS5 480 Blade PH 1 KLE300IS6 480 Blade PH 2 KLE300IS7 480 Blade PZ 2 KLE300IS8 480 Blade TX 10 KLE300IS9 480 Blade TX 15 KLE300IS Blade plus/minus Z 1 KLE300IS Blade plus/minus Z 2 KLE300IS E-Smart Handle 93 x 32 KLE300IS

14 With non-slip protection and protective uard Acc. to VDE Hand tools VDE tools NH safety handle with uard NH- fuses Size 00-3 NH- fuses Size 00-3 With non-slip protection and protective uard Desination: 1000 V Acc. to DIN VDE 0680/4 Made from imprenated leather weiht Packin NH safety handle with uard KL Electrician's safety helmet acc. to DIN EN 397 acc. to DIN EN V AC Desination: 1000 V Head size adjustable weiht Packin Electrician's safety helmet KL602GELB Electricians face protection shield Acc. to VDE Desination 1000 V weiht Packin Electricians face protection shield KL

15 Safety mat for hih voltae areas Desination: 1000 Volt Hand tools VDE tools Insulatin floor mat Safety mat for hih voltae areas Tested acc. to DIN 0303, part 21 Sure-footed Non-slip Safety mat for safe workin with live parts in hih voltae areas up to 1000 Volt Dimensions weiht Packin Insulatin floor mat KL620S x1000x Rubber cover Desination: 1000 Volt Penetration resistant Tested acc. to DIN VDE 0680, part 1 Insulatin cover Test voltae: 5 kv/1 min. Upper and lower side flat Dimensions weiht Packin Rubber cover KL625A x500x1, Rubber cover KL625A x1000x1, Plastic clamp To fix rubber cover Dimensions weiht Packin Plastic clamp KL

16 Blade lenth: 50 Special blade tip to protect insulation of conductor Hand tools VDE tools Safety loves acc. to DIN EN acc. to DIN EN Size 09 / Size 10 For workin in voltae ranes up to 1000 Volt Dimensions weiht Packin Safety loves KL60509 Size Safety loves KL60510 Size Cotton loves (cotton) For use with safety loves For use with safety loves weiht Packin Cotton loves KL605U 50 1 Cable knife, straiht Blade lenth: 50 With straiht, stron blade and safety cap Dimensions weiht Packin Cable knife, straiht KL640GK Electricians knife Special blade tip to protect insulation of conductor Safety cap Blade lenth: 40 With hooked blade Dimensions weiht Packin Electricians knife KL642HK

17 With 2-layers of protective insulation Hand tools VDE tools Tweezers With 2-layers of protective insulation Non-slip protection Straiht and pointed tips Dimensions weiht Packin Tweezers KL Cleanin brush All plastic weiht Packin Cleanin brush KL Hexaonal wrench Hexaonal wrench SW 5 Hexaonal wrench SW 6 K601 K602 Hexaonal wrench Hexaonal wrench SW 5 Hexaonal wrench SW 6 K606 K607 Guide wede Guide wede K

18 Hard-shell tool case, red Hand tools VDE tools Torque wrench 20 Nm Torque wrench 20 Nm Hexaonal bit SW 5 Hexaonal bit SW 6 K615 K6151 K6152 VDE-Tool chest, 28-piece Hard-shell tool case, red Comprisin 27-toosl, partially VDE tested tools acc. to DIN EN Dimensions weiht Packin VDE-Tool chest, 28-piece KL880B26IS 515x420x Scope of supply Pae Waterpump plier 1000 V KL070250IS 433 VDE Heavy-duty combination plier KL020180IS 430 VDE Side cutters KL040160IS 431 VDE Electricians heavy duty side cutter KL044200IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Wire stripper KL060160IS 433 VDE Cable cutters KL010160IS 430 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 435 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ2IS 435 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Sinle-pole voltae tester KL19073IS 436 Cable knife, straiht KL640GK 442 Rubber cover KL625A Plastic clamp KL Safety loves KL Cotton loves KL605U 442 Tweezers KL Cleanin brush KL Control cabinet spirit level KL Wire stripper 1000 V KL760180IS 433 Tool chest, empty KL880L 444 Tool chest red, empty Red, hard-shell Dimensions weiht Packin Tool chest, empty KL880L 515x420x

19 Hand tools VDE tools 445

20 Innovative. Functional. And eronomic. Top quality tools made in Germany. The Klauke tool rane covers standard tools, safety tools, measurin and markin tools based on latest laser technoloy. Pliers and VDE pliers have been ranted with the IF Product Desin Award. Impact-resistant core throuhout. Pliers, screwdrivers. Bits, holders and adapters. Basic tools, safety tools. Measurin and markin tools. Maximum interation: Impact protection and markin field in the handles. 446

21 Special handle for rip and cushion. Protection by safety cushion at the end of handle. Secure positionin thanks to non-slip handle material. Eronomically-desined handles. Benefits: The safety cushion protects the pliers from damae even when dropped. Pliers won't slip even when placed on inclines. Specially-desined handles for increased force. Efficiency is also improved. The correct blade for every screw. Available in 8 different shapes. Eronomically desined two-component handles. All screwdrivers are also available VDE approved. More on Pae 454. Benefits: The Klauke rane offers a suitable screwdriver for every screw type. The two-component handles developed specifically for Klauke tools, impress with pleasant haptic and outstandin torque transfer. Precise measurin quickly and easy. Small and convenient. Simple operation. Illuminated display. More on Pae 466. Benefits: Thanks to its compact dimensions the device fits into any pocket. Easy operation enables precise and quick measurin within a rane of up to 100 m. The illuminated display allows values to be easily read off even in the dark. 447

22 Strippin and cuttin of copper and aluminium cables Holds flat and round material Holds flat and round material Hand tools Standard tools Cable cutters New wave profile for loner service life Strippin and cuttin of copper and aluminium cables Cable cross-section up to 50 ², cable up to Ø 16 (KL010160) Cable cross-section up to 70 ², cable up to Ø 25 (KL010210) Adjustable joint Adjustable joint Dimensions weiht Packin Cable cutters KL Cable cutters KL Heavy-duty combination plier With combination spanner from (M8 - M10) Holds flat and round material Blades for hard and soft wires Dimensions weiht Packin Heavy-duty combination plier KL Heavy-duty combination plier KL Heavy-duty combination plier KL Heavy-duty combination plier anled With combination spanner from (M8 - M10) Holds flat and round material Blades for hard and soft wires Anled head Anled head Dimensions weiht Packin VDE Heavy-duty combination plier anled KL Lon flat nose plier Serrated jaws With lon, flat jaws With lon, flat jaws Dimensions weiht Packin Lon flat nose plier KL

23 Soft copper and aluminium, plastic up to Ø 5.0 / 6.0 / 7.0 Hard wire and steel wire up to Ø 2.6 / 2.8 Hand tools Standard tools Lon round nose plier Serrated jaws Anti-slip, rounded precision tips With lon, round jaws With lon, round jaws Dimensions weiht Packin Lon round nose plier KL Side cutters New wave profile for loner service life Soft copper and aluminium, plastic up to Ø 5.0 / 6.0 / 7.0 Hard wire, wire cable fibre, steel wire up to Ø 1.7 / 2.0 / 2.5 Cable - multiconductors, sinle core and stranded Ø 8 / 11 / 13 Hih cuttin performance on hard and soft wires Hih cuttin performance on hard and soft wires Dimensions weiht Packin Side cutters KL Side cutters KL Side cutters KL Heavy duty side cutters New wave profile for loner service life Increased force transmission throuh eronomically formed shank Hard wire and steel wire up to Ø 2.6 / 2.8 Piano wire up to Ø 2.2 / 2.5 Medium-hard wire up to Ø 3.7 / 4.0 Hih cuttin performance on hard and soft wires Hih cuttin performance on hard and soft wires Dimensions weiht Packin Heavy duty side cutters KL Heavy duty side cutters KL

24 Soft copper and aluminium wire, plastic up to Ø 2.5 / > 2.5 Straiht, flat-round jaws Soft copper and aluminium wire, plastic up to Ø 2.5 / > 2.5 Serrated jaws Cable - multiconductors, sinle core and stranded up to 10.0 ² Hand tools Standard tools Telephone pliers, straiht With combination spanner from (M8 - M10) Soft copper and aluminium wire, plastic up to Ø 2.5 / > 2.5 Medium-hard wire, nails, wire nails up to Ø 1.6 / 3.2 Hard wire and steel wire up to Ø 2.2 (only KL050205) Straiht, flat-round jaws With wire cutter for hard and soft wires Dimensions weiht Packin Telephone pliers, straiht KL Telephone pliers, straiht KL Telephone pliers, bent With combination spanner from (M8 - M10) Soft copper and aluminium wire, plastic up to Ø 2.5 / > 2.5 Medium-hard wire, nails, wire nails up to Ø 1.6 / 3.2 (KL055205) Serrated jaws 45 anled flat-round jaws With wire cutter for hard and soft wires Dimensions weiht Packin Telephone pliers, bent KL Telephone pliers, bent KL Wire stripper Cable - multiconductors, sinle core and stranded up to 10.0 ² Cable - multiconductors, sinle core and stranded Ø 5.0 With openin sprin and V-shaped cuttin edes Dimensions weiht Packin Wire stripper KL

25 Ratchet adjustment Ratchet adjustment Optimum pivot point - lower effort Hand tools Standard tools Waterpump plier Jaw width 50 Interated hand protection Ratchet adjustment Box joint Double serrated jaws Teeth additionally inductive hardened Plastic coated handles (KL070250G) 2-component handle (KL070250) Dimensions weiht Packin Waterpump plier KL070250G Waterpump plier KL Waterpump plier Jaw width 35 Interated hand protection Ratchet adjustment Box joint Double serrated jaws Plastic coated handles (KL / KL / KL ) 2-component handle (KL072250) Dimensions weiht Packin Waterpump plier KL072180G Waterpump plier KL072250G Waterpump plier KL072300G Waterpump plier KL Waterpump plier, rooved Jaw width 50 Double rooved joint and safety stop Optimum pivot point - lower effort Plastic coated handles (Only KL075250G) Non-slip overlay due to matched elastomers 2-component handle (KL075250) Dimension Jaw width weiht Waterpump plier, rooved KL075250G Packin unit/ pcs Waterpump plier, rooved KL

26 Push-button adjustment ESD - electrical discharin Attention! ESD rips do not protect aainst voltae. for rippin small items ESD - electrical discharin Attention! ESD rips do not protect aainst voltae. Hand tools Standard tools Basin wrench Lare jaw openin adjustable from 0-53 Interated hand protection Smooth polished jaws Smooth polished jaws Push-button adjustment Box joint Plastic coated handles Dimension Jaw width weiht Basin wrench KL078250G Packin unit/ pcs Electronic side cutters, with facet Note: ESD - electrical discharin with electrical discharin rips Precision plier for hih precision work double leaf sprin with low friction abduct of electrostatic enery Surface resistance amounts 1 to 100 MOhm Attention! ESD rips do not protect aainst voltae. Dimensions weiht Packin Electronic side cutters, with facet Electronic side cutters, without facet KL040115EL KL040115ELW Electronic chain nose plier for rippin small items formin of wires Note: ESD - electrical discharin with electrical discharin rips Smooth inside jaws, edes rounded with electrical discharin rips abduct of electrostatic enery Surface resistance amounts to 1 to 100 MOhm Attention! ESD rips do not protect aainst voltae. Dimensions weiht Packin Electronic chain nose plier KL050115EL

27 With openin sprin Holder with exchaneable blades for slotted screws 1.5 to 4.0 Hand tools Standard tools Electronic side cutters, without wire trappin sprin clearance anle 21 With openin sprin Cuttin edes additionally induction hardened 2-component handle for wires up to Ø 1.3 Dimensions weiht Packin Electronic side cutters, without wire trappin sprin Electronic side cutter, with wire trappin sprin KL040128EL KL040128ELH Electronic assortment, 7-pieces Holder with exchaneable blades for slotted screws 1.5 to 4.0 Cross-slotted PH-screws PH000 to PH1 Cross-slotted PZ-screws PZ0 to PZ1 2-component handle weiht Electronic assortment, 7-pieces Packin KL Scope of supply Pae Blade 1.5 x x 0.5 KLE Blade 2.0 x x 0.6 KLE Blade 2.5 x x 0.8 KLE Blade PH PH 00 KLE Blade PH 0 - PH 1 KLE Blade PZ 0 - PZ 1 KLE Tool holder 95 x 14 KLE Slotted screwdrivers Dimension Blade lenth weiht Slotted screwdrivers, 75 KL ,5 x 0, Slotted screwdrivers, 80 KL ,0 x 0, Slotted screwdrivers, 100 KL ,5 x 0, Slotted screwdrivers, 100 KL ,0 x 0, Slotted screwdrivers KL ,5 x 1, Slotted screwdrivers KL ,5 x 1, Slotted screwdrivers, 175 KL ,0 x 1, pcs. 453

28 Hand tools Standard tools Workshop screwdriver for slotted screws With hexaonal shank Dimensions Blade lenth weiht pcs. Workshop screwdriver, 100 Workshop screwdriver, 125 Workshop screwdriver, 150 KL ,5 x 1, KL ,5 x 1, KL ,0 x 1, Cross slotted screwdriver PZ1, PZ2, PZ3 Dimension Blade lenth weiht pcs. Cross-slotted screws (Pozidriv) PZ Cross-slotted screws (Pozidriv) PZ Cross-slotted screws (Pozidriv) PZ KL120PZ1 PZ KL120PZ2 PZ KL120PZ3 PZ Cross slotted screwdriver PH1, PH2, PH3 Dimension Blade lenth weiht pcs. Cross-slotted screws (Phillips) PH Cross-slotted screws (Phillips) PH Cross-slotted screws (Phillips) PH KL110PH1 PH KL110PH2 PH KL110PH3 PH

29 Hand tools Standard tools Torx screwdrivers For Torx TR (Tamper Resistant) Dimension Blade lenth weiht pcs. Torx screwdrivers KL150TR10 Tx TR Torx screwdrivers KL150TR15 Tx TR Torx screwdrivers KL150TR20 Tx TR Torx screwdrivers KL150TR25 Tx TR Torx screwdrivers KL150TR30 Tx TR Torx screwdrivers KL150TR40 Tx TR Screwdrivers, ball-point Dimensions Blade lenth weiht pcs. Screwdrivers, ball-point KL160KI Screwdrivers, ball-point KL160KI Screwdrivers, ball-point KL160KI Screwdrivers, ball-point KL160KI Screwdrivers, ball-point KL160KI Carburettor screwdriver Dimensions Blade lenth weiht pcs. Carburettor screwdriver, slotted screws KL ,5 x 1,

30 Shank 1/4" (6.3) DIN3126 Hand tools Standard tools Carburettor screwdriver Dimension Blade lenth weiht pcs. Carburettor screwdriver, cross-slotted KL11025PH1 PH Screwdriver-Bits, 1/4" 73 Shank 1/4" (6.3) DIN3126 Dimensions 0.6 x 3.5 Dimensions Blade lenth weiht Number Parts Bit for slotted screws KL ,6x3, Bit for slotted screws KL ,8x4, Bit for slotted screws KL ,0x5, Bit for slotted screws KL ,2x6, Packin unit/ pcs Screwdriver-Bits, 1/4" 73 Cross-slotted PZ-screws (Pozidriv) PZ 1 + PZ 2 Cross-slotted PZ-screws (Pozidriv) PZ 1 + PZ 2 Shank 1/4" (6.3) DIN3126 Shank 1/4" (6.3) DIN3126 Dimension Blade lenth Bit for cross-slotted screws (Pozidriv) Bit for cross-slotted screws (Pozidriv) weiht Number Parts Packin unit/ pcs KL22073PZ1 PZ KL22073PZ2 PZ

31 Shank 1/4" (6.3) DIN3126 Hand tools Standard tools Screwdriver-Bits, 1/4" 73 Cross-slotted PH-screws (Phillips) PH 1 + PH 2 Cross-slotted PH-screws (Phillips) PH 1 + PH 2 Shank 1/4" (6.3) DIN3126 Shank 1/4" (6.3) DIN3126 Dimension Blade lenth Bit for cross-slotted screws (Phillips) Bit for cross-slotted screws (Phillips) weiht Number Parts Packin unit/ pcs KL21073PH1 PH KL21073PH2 PH Screwdriver-Bits, 1/4" 73 Torx screws Torx screws Shank 1/4" (6.3) DIN3126 Shank 1/4" (6.3) DIN3126 Dimension Blade lenth weiht Number Parts Bit for Torx screws KL25073TX10 TX Bit for Torx screws KL25073TX15 TX Bit for Torx screws KL25073TX20 TX Bit for Torx screws KL25073TX25 TX Bit for Torx screws KL25073TX27 TX Bit for Torx screws KL25073TX30 TX Bit for Torx screws KL25073TX40 TX Packin unit/ pcs Screwdriver-Bits, 1/4" 73 Plus/minus screws Z 1 + Z 2 Plus/minus screws Z 1 + Z 2 Shank 1/4" (6.3) DIN3126 Shank 1/4" (6.3) DIN3126 Dimension Blade lenth weiht Number Parts Bit for plus/minus screws KL23073PM1 Z Bit for plus/minus screws KL23073PM2 Z Packin unit/ pcs Manetic holder for Screwdriver-Bits, 1/4" 58 Shank 1/4" (6.3) DIN3126 Stron manet Dimensions weiht Packin Manetic holder KL

32 Shank 1/4" (6.3) DIN3126 Hand tools Standard tools Mechanical bit holder, 1/4" 52 Shank 1/4" (6.3) DIN3126 With quick-chane chuck Dimensions weiht Packin Mechanical bit holder KL Adapter 1/4" 50 Shank E 6.3 and 1/4" socket wrench Drive for socket wrenches Drive for socket wrenches Shank 1/4" (6.3) Shank 1/4" (6.3) Dimensions weiht Packin Adapter 1/4" KL Adapter 3/8" 50 Shank E 6.3 and 3/8" socket wrench Drive for socket wrenches Drive for socket wrenches Shank 1/4" (6.3), shank 3/8" 10 Shank 1/4" (6.3), shank 3/8" 10 Dimensions weiht Packin Adapter 3/8" KL

33 Hand tools Standard tools Plier set, 3-pieces weiht Packin Plier set, 3-pieces KL Scope of supply Pae Heavy-duty combination plier KL Side cutters KL Telephone pliers, straiht KL Plier set, 4-pieces weiht Packin Plier set, 4-pieces KL Scope of supply Pae Heavy-duty combination plier KL Side cutters KL Telephone pliers, straiht KL Wire stripper KL Plier set, 3-pieces weiht Packin Plier set, 3-pieces KL Scope of supply Pae Heavy-duty combination plier KL Heavy duty side cutters KL Waterpump plier KL Plier set, 3-pieces weiht Packin Plier set, 3-pieces KL Scope of supply Pae Basin wrench KL078250G 452 Waterpump plier KL072180G 451 Waterpump plier KL072250G

34 Hand tools Standard tools Screwdriver set, 3-pieces weiht Packin Screwdriver set, 3-pieces KL Scope of supply Pae Workshop screwdriver, 100 KL Workshop screwdriver, 125 KL Workshop screwdriver, 150 KL Torx Screwdriver set, 3-pieces weiht Packin Torx Screwdriver set, 3-pieces KL Scope of supply Pae Torx screwdrivers KL150TR Torx screwdrivers KL150TR Torx screwdrivers KL150TR Socket head bit set 1/4", 28-pieces 16 Bits: C 6.3 x 25m / PH1 / PH2 / PZ1 / PZ2 / PZ3 / SW3 / SW4 / SW5 / SW6 / 3.5 x 0.6 / 5.5 x 0.8 / 6.5 x 1.2 / T15 / T20 / T25 / T30 1 Quick-chane chuck 7 socket head spanners: 5 / 5,5 / 6 / 7 / 8 / 10 / 13 1 Adapter 1/4" 1 Extension 1/4'' 1 Extension for socket head spanner 1 ratchet weiht Socket head bit set 1/4", 28-pieces Number of parts Packin unit/ pcs KL Scope of supply Pae 16-piece Bit set C 6.3 1/4" 7-piece Socket set 1/4" Adapter 1/4" x 25 Adapter 1/4" x 150 Extension 75 Ratchet 1/4" neutral 1K Smart handle 105 x 39 KLE3601 KLE3602 KLE3603 KLE3604 KLE3605 KLE3606 KLE

35 Precise release when reachin the set torque Hand tools Standard tools Allen key set, 7-pieces In practical holder SW 2 / SW 2.5 / SW 3 / SW 4 / SW 5 / SW 6 / SW 8 SW 2 / SW 2.5 / SW 3 / SW 4 / SW 5 / SW 6 / SW 8 Dimension weiht Number of parts Allen key set KL370 SW Packin unit/ pcs Ball point allen key set, 9-pieces In plastic holder SW 1.5 / SW 2 / SW2,5 / SW 3 / SW 4 / / SW 5 / SW 6 / SW 8 / SW 10 SW 1.5 / SW 2 / SW2,5 / SW 3 / SW 4 / / SW 5 / SW 6 / SW 8 / SW 10 Dimension weiht Number of parts Allen key set, ball point KL375 SW Packin unit/ pcs Torque-wrench set, 14-pieces NM Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Precise release when reachin the set torque In practical holder weiht Number of parts Torque-wrench set, 14-pieces KL Packin unit/ pcs Scope of supply Pae NM blade TX 6 x 170 NM blade PH 0 x 170 NM blade PZ 0 x 170 NM blade manetic 170 NM handle Nm NM blade TX 7 x 170 NM blade TX 8 x 170 NM blade Tx IP 7 x 170 NM blade Tx IP 8 x 170 NM blade Tx IP 9 x 170 NM blade 3.0 x 0.5 x 170 NM blade 3.5 x 0.6 x 170 NM blade Z1 x 170 Adjustin spanner KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE

36 Torque rane from Nm Hand tools Standard tools Torque wrench set, 14-pieces Nm Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Torque rane from Nm Easy torque adjustment Precise release when reachin the set torque Black tip for precision fit In practical holder weiht Number of parts Torque wrench set, 14-pieces KL Packin unit/ pcs Scope of supply Pae NM blade 4.0 x 0.8 x 170 NM blade Tx IP 10 x 170 NM blade Tx IP 15 x 170 NM blade manetic 170 NM handle NM blade Z1 x 170 NM blade 72 x 170 NM blade PH 1 x 170 NM blade PH 2 x 170 NM blade PZ 1 x 170 NM blade PZ 2 x 170 NM blade TX 10 x 170 NM blade TX 15 x 170 Adjustin spanner KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE

37 Torque rane from Nm KL330: 0.5 x 3 / 0.6 x 3.5 / 0.8 x 4 / 1.0 x 5.5 / PH 1 / PH 2 KL331: PZ1 / PZ2 / PZ3 / PH1 / PH2 / PH3 Hand tools Standard tools Torque wrench set, 14-pieces Nm Exchaneable blades for reatest flexibility in all areas of use Easy torque adjustment Precise release when reachin the set torque Best performance, up to 100% above DIN values Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Slotted, cross-slotted, Torx and plus/minus screws, Pozidriv Torque rane from Nm Easy torque adjustment Precise release when reachin the set torque Black tip for precision fit In practical holder weiht Number of parts Torque wrench set, 14-pieces KL Packin unit/ pcs Scope of supply Pae NM blade 4.0 x 0.8 x 170 NM blade PH 1 x 170 NM blade PH 2 x 170 NM blade PZ 1 x 170 NM blade PZ 2 x 170 NM blade TX 15 x 170 NM blade TX 20 x 170 NM blade TX 25 x 170 NM blade Tx IP 10 x 170 NM blade Tx IP 15 x 170 NM blade manetic 170 NM handle NM blade 72 x 170 Adjustment tool KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE KLE Bit assortment, 6-piece, 1/4" x 73 KL335: Tx10 / Tx15 / Tx20 / Tx25 / Tx30 / Tx40 KL330: 0.5 x 3 / 0.6 x 3.5 / 0.8 x 4 / 1.0 x 5.5 / PH 1 / PH 2 KL331: PZ1 / PZ2 / PZ3 / PH1 / PH2 / PH3 KL335: Tx10 / Tx15 / Tx20 / Tx25 / Tx30 / Tx40 Shank 1/4" (6.3) DIN3126 Blade lenth weiht Number of parts Bit set KL Bit set KL Packin unit/ pcs Torx bit set KL

38 Shank 1/4" (6.3) DIN3126 Width across flats SW 8/9/10/11/12/13/14/15/16/17/19/22 Hand tools Standard tools Bit-Box-Swift, 7-piece, 1/4" 25 KL340: 1.0 x 5.5 / 1.2 x 6.5 / PZ 1 / PZ 2 / PH 1 / PH 2 KL340: 1.0 x 5.5 / 1.2 x 6.5 / PZ 1 / PZ 2 / PH 1 / PH 2 KL345: Tx10 / Tx15 / Tx20 / Tx25 / Tx30 / Tx40 Shank 1/4" (6.3) DIN3126 Sizes: 1.0 x 5.5 / 1.2 x 6.5 / PZ 1 / PZ 2 / PH 1 / PH 2 In practical holder Incl. manetic holder Blade lenth weiht Number of parts Bit box Swift KL Torx bit box Swift KL Packin unit/ pcs Combination spanner set, 12-pieces Width across flats SW 8/9/10/11/12/13/14/15/16/17/19/22 Material: Chromium-Vanadium Surface: chrome-plated Dimensions weiht Packin Combination spanner set KL365 SW

39 White/yellow Hand tools Standard tools Control cabinet spirit level, 200 Spirit level, torpedo type,horizontal, vertical and 45 levels Spirit level, torpedo type,horizontal, vertical and 45 levels Dimensions weiht Packin Control cabinet spirit level KL x42x Aluminium spirit level, 400 With vertical and horizontal levels With vertical and horizontal levels Dimensions weiht Packin Aluminium spirit level KL x 40 x Aluminium spirit level KL x 40 x Foldin rule, 2 m White/yellow No. of links 10 weiht Packin Foldin rule KL Measurin tape, 3 m With 3 functions: Lenth, inside dimension and circles With 3 functions: Lenth, inside dimension and circles weiht Packin Measurin tape KL

40 Hand tools Standard tools Leica hand laser meter Disto D2 Measurin distances up to 60 m calculate distance and results usin the world's smallest laser distance meter Technical data Rane (for loner distances, use taret sinal) Measurin accuracy Smallest display unit Laser class: Laser type Automatic stop Display liht Continuous measurement Addition/Subtraction Indirect measurement usin Pythaoras Minimum and maximum measurement Multifunctional end piece Batteries Dimension and weiht Temperature rane: Storae Operation 0.05 m to 60 m ± II 635 nm, < 1 mw in 180 s Type AAA 2x1.5 V 111 x 43 x 23, C to +70 C 0 C to +40 C Call-up last measurements 10 Dimensions weiht Packin Leica Hand laser meter Disto D2 KLHLMD2 111 x 43 x

41 Hand tools Standard tools Leica hand laser meter Disto D3 Fast distance measurin up to 100 m also distance over obstacles and the exact determination of the anle Technical data Measurin accuracy typical Rane Power Rane Technoloy Distance in m Ø Laser point in Minimum and maximum measurement Continuous measurement Addition/Subtraction Multiple unplu function Indirect measurement usin Pythaoras ± to 100 m 10, 50, 100 m 6, 30, 60 Horizontal distance usin incline sensor Incline sensor Measurin rane Accuracy for laser beam Accuracy for housin ± 45 ± 0,3 ± 0,3 Units in the incline sensor ± 0,0, 0,00% Automatic release Automatic display/keypad illumination Measurin units m, m, 0.00 m, 0.00 ft, 0' 00'' 1/32, 0.0 in, 0 1/32 in Measurements per battery unit up to 5,000 Multifunctional end piece Tripod socket Batteries Type AAA 2x 1.5V Splash water / dust proof IP 54 Dimensions Weiht incl. batteries 125 x 45 x Dimensions weiht Packin Leica hand laser meter Disto D3 KLHLMD3 45 x 125 x

42 oval shape Hand tools Standard tools Carpenter's pencil oval shape pointed weiht Packin Carpenter's pencil KL Markin pen Permanent marker Multimark Fine tip for 0.6 Black Black weiht Packin Markin pen KL440F 10 1 Chalk for chalk line 100 bottle 100 bottle weiht Packin Chalk for chalk line, red KL451ROT Chalk for chalk line, blue KL451BLAU Chalk line The drawin of lines for cable installation The drawin of lines for cable installation Cord: 15 m Cord: 15 m weiht Packin Chalk line KL

43 Inner square 5, 6 and 7-8 With outside square 6-9 With chain and adapter Hand tools Standard tools Universal cabinet key, subkey Electro Subkey "Elektro": for all standard control cabinet closures with double swivel lock Inner square 5, 6 and 7-8 Trianular 9 Double pin keys 3-5 Includin 1/4" bit retainer with radiator valve key Dimensions weiht Packin Universal cabinet key, subkey Electro KL Universal cabinet key, subkey Shop With outside square 6-9 Trianular 8 Square socket 5 and 8 Includin 1/4" bit retainer with radiator valve key Dimensions weiht Packin Universal cabinet key, subkey Shop KL Multi key With chain and adapter Square socket 7-8 Trianular 8-9 Double pin keys 3-5 Half-moon weiht Packin Multi key KL fiure similar. 469

44 With chain and adapter Chromium-Vanadium steel, air-hardened Hand tools Standard tools Control cabinet key With chain and adapter With square socket 5, 6, 7-8 Trianular 7-8 Double pin keys 3-5 Slotted screws Cross-slotted PH 2 weiht Packin Control cabinet key KL Enineers haer Steel-fored head Ground finish With protective nylon shroud Dimensions weiht Packin Enineers haer KL Enineers haer KL Slede haer Steel-fored head Ground finish With protective nylon shroud Dimensions weiht Packin Slede haer, 1,000 KL Slede haer, 1,250 KL Jointin chisel Chromium-Vanadium steel, air-hardened Safety heads, annealed Dimensions weiht Packin Jointin chisel KL x 26 x

45 Chromium-Vanadium steel, air-hardened Hand tools Standard tools Electricians chisel Chromium-Vanadium steel, air-hardened Safety heads, annealed Dimensions weiht Packin Electricians chisel KL Electricians chisel KL Safety handle for jointin chisel Part KL Part KL weiht Packin Safety handle for jointin chisel KL Electricians knife Hined, with plastic handle Hined, with plastic handle Dimensions weiht Packin Electricians knife KL Hand saw With fixed wooden handle With fixed wooden handle Dimensions weiht Packin Hand saw KL Metal saw blades KL550ES

46 e.. round or flat material from copper, aluminium, plastic, paper, cardboard, leather Serrated cuttin edes Hand tools Standard tools Universal saw With fibrelass reinforced plastic handle With fibrelass reinforced plastic handle Dimensions weiht Packin Universal saw KL Metal saw blades KL550ES Combination scissors e.. round or flat material from copper, aluminium, plastic, paper, cardboard, leather Serrated cuttin edes With safety lock Dimensions weiht Packin Combination scissors KL Universal knife With adjustable and replaceable blades With adjustable and replaceable blades Dimensions weiht Packin Universal knife KL Spare blade KL542ES 60x19x0,5 8 1 Cutter knife Knife with knock-off blades, all 9 Knife with knock-off blades, all 9 Dimensions weiht Packin Cutter knife KL Spare blade KL544ES

47 with replaceable lenses Hand tools Standard tools Safety oles in nylon ba with replaceable lenses Simple and fast replacement Can be turned into sunlasses weiht Packin Safety oles in nylon ba KL Sun protection lenses for KL604 KL604S 23 1 Tool chest, 21-piece Comprisin 20-toosl, partially VDE tested tools acc. to DIN EN Comprisin 20-toosl, partially VDE tested tools acc. to DIN EN Hard-shell case, black Dimensions weiht Packin Tool chest, 21-piece KL800B21 485x405x Scope of supply Pae Waterpump plier KL072250G 451 VDE Heavy-duty combination plier KL020180IS 430 VDE Side cutters KL040160IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Wire stripper KL060160IS 433 Workshop screwdriver, 100 KL Workshop screwdriver, 125 KL VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Sinle-pole voltae tester KL19073IS 436 Enineers haer KL Jointin chisel KL Electricians chisel KL Hand saw KL Electricians knife KL Foldin rule KL Carpenter's pencil KL Tool chest, empty KL800L

48 Hand tools Standard tools Tool chest, 20-piece Comprisin 19-toosl, partially VDE tested tools acc. to DIN EN Comprisin 19-toosl, partially VDE tested tools acc. to DIN EN Hard-shell case, black Dimensions weiht Packin Tool chest, 20-piece KL810B20 505x410x Scope of supply Pae Waterpump plier KL072250G 451 VDE Heavy-duty combination plier KL020180IS 430 VDE Heavy duty side cutters KL045200IS 432 VDE Telephone pliers, straiht KL050205IS 432 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 435 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ2IS 435 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Sinle-pole voltae tester KL19073IS 436 Measurin tape KL Enineers haer KL Universal saw KL Cutter knife KL Carpenter's pencil KL Tool chest, empty KL810L

49 Hand tools Standard tools Tool chest, 28-piece Comprisin 27-toosl, partially VDE tested tools acc. to DIN EN Comprisin 27-toosl, partially VDE tested tools acc. to DIN EN Hard-shell case, black Dimensions weiht Packin Tool chest, 28-piece KL820B28 515x420x Scope of supply Pae Waterpump plier KL072250G 451 VDE Heavy-duty combination plier KL020180IS 430 VDE Electricians heavy duty side cutter KL044200IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Cable cutters KL010160IS 430 Electronic side cutters, without wire trappin sprin KL040128EL 453 Workshop screwdriver, 100 KL Workshop screwdriver, 125 KL VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 435 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ2IS 435 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Sinle-pole voltae tester KL19073IS 436 Allen key set, ball point KL Control cabinet key KL Measurin tape KL Enineers haer KL Universal saw KL Cutter knife KL Electricians knife KL Carpenter's pencil KL Control cabinet spirit level KL Tool chest, empty KL820L

50 With 4-section telescopic handle, up to 1050 Hand tools Standard tools Professional roller trolley, 88-piece 88- pcs. equipped with tools for the daily use With 4-section telescopic handle, up to 1050 Document compartment in lid Double aluminium frame Lare rubber casters Case shell from non-breakable X-ABS loads up to 40 k Hines for case lid lock Dimensions weiht Packin Professional roller trolley, 88-piece KL890TB88 470x210x Scope of supply Pae VDE Heavy-duty combination plier KL020180IS 430 VDE Electricians heavy duty side cutter KL044200IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Wire stripper KL060160IS 433 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Slotted screwdriver KL IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH1IS 434 VDE Cross slotted screwdriver Phillips PH KL110PH2IS 434 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ1IS 435 VDE Cross slotted screwdriver Pozidriv PZ KL120PZ2IS 435 Sinle-pole voltae tester KL19073IS 436 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 VDE Cable cutters KL010210IS 430 Waterpump plier KL Bit set KL Combination spanner set KL Socket head bit set 1/4", 28-pieces KL Universal cabinet key, subkey Electro KL Universal saw KL Mechanical crimpin tool for interchaneable dies K Foldin rule KL Carpenter's pencil KL Allen key set KL Enineers haer KL Safety oles in nylon ba KL Markin pen KL440F 468 GT-85E bipolar voltae tester with LCD display Professional roller trolley KL890TL 478 NETcat Micro + 200EP NC100EP 637 CSJ-100 jaw meter, open

51 Material: Polytex Hand tools Standard tools Enineers professional case, 15-piece Enineers basic equipment, partially with VDE tools Material: Polytex Adjustable carryin belt with shoulder strap two lare side pockets 2 lare 90 foldin side compartments Front side compartment: DIN A4 document sleeve, 17 slots for tools and measurin instruments, 1 small part pocket Rear side compartment: 4 lare slots, 28 elastic straps, separate main compartment for laptop 17", additionally split by removable centre panel weiht Packin Enineers professional case KL900B Scope of supply Pae VDE Screwdriver set, 6-pce. KL390IS 438 VDE-Plus/minus screwdriver KL130PM1IS 435 VDE-Plus/minus screwdriver KL130PM2IS 435 Electricians knife with hooked blade KL745HK 487 Round cable stripper KL VDE Electricians heavy duty side cutter KL044200IS 431 VDE Telephone pliers, straiht KL050205IS 432 VDE Heavy-duty combination plier KL020165IS 430 Measurin tape KL Enineers combination ba KL900L 478 Tool chest, empty Black, hard-shell Black, hard-shell Dimensions weiht Packin Tool chest, empty KL800L 485x405x Tool chest, empty Black, hard-shell Black, hard-shell Dimensions weiht Packin Tool chest, empty KL810L 505x410x

52 With 4-section telescopic handle, up to 1050 Material: Polytex Material: Polytex Hand tools Standard tools Tool chest, empty Black, hard-shell Black, hard-shell Dimensions weiht Packin Tool chest, empty KL820L 515x420x Professional roller trolley, empty With 4-section telescopic handle, up to 1050 Document compartment in lid Double aluminium frame Lare rubber casters Case shell from non-breakable X-ABS 2 compartments for business cards Two straps for writin instruments Dimensions weiht Packin Professional roller trolley KL890TL 470x210x Nylon tool holder, empty Material: Polytex Accepts up to 11 tools Dimensions weiht Packin Nylon tool holder, empty KL910L 200x200x Enineers combination ba For laptop and tools Material: Polytex Adjustable carryin belt with shoulder strap two lare side pockets 2 lare 90 foldin side compartments Front side compartment: DIN A4 document sleeve, 17 slots for tools and measurin instruments, 1 small part pocket Rear side compartment: 4 lare slots, 28 elastic straps, separate main compartment for laptop 17", additionally split by removable centre panel Dimensions weiht Packin Enineers combination ba KL900L 330x440x

53 Upper rotatin metal rods, with spone rubber-handle Hand tools Standard tools Profi-installer's pocket Upper rotatin metal rods, with spone rubber-handle Completely covered ba With rip recess Adjustable carryin belt with shoulder pad Robust plastic tracks Outdoor connections: 1 lare lockable label pocket with 2 accessory boxes, 9 pockets, 2 Velcro for fix spirit level etc. Indoor connections: 3 compartments, 14 straps Dimensions weiht Packin Profi-installer's pocket KL920L 350 x 200 x

54 Insulation easily stripped. Strippin tools for professional use. Thousands of conductors are stripped every day. Mostly usin professional tools. But also often in a hurry usin a sharp blade. A standard action for many craftsmen but with potential serious consequences for electrical connections: Conductors and insulation are damaed or specified strippin lenths are not respected the connections no loner meet requirements. The use of professional strippin tools prevent such mistakes. Procedures can be standardised. The quality of connections remains consistent. Klauke strippin tools are desined for professional use and are characterized by their extremely lon durability. Standardised strippin Automatic wire strippin tools. For strippin ranes from to Also one-hand operation for larer cross sections. by simple adjustment of the tools. 480

55 Eronomically-desined handle and interchaneable blade cassettes: K 432. Eronomically-desined rubber-coated handles. Made from reinforced fibre lass special plastic. Automatic adjustment of the cable cross-section. Interchaneable blade cassettes for flexible and solid conductors and also for PVC and PTFE insulation. Your benefits: The eronomically-desined rubber coated handles uarantee comfortable user-friendly operation. The reinforced fibre lass special plastic increases durability. Hih flexibility with interchaneable blade cassettes. KL 765 PV: Solar cables easily processed. For strippin all standard flexible cables from 1.5 to in the solar technoloy. 5-fold adjustable fine settin. With interated side cutter. Your benefits: Just with one tool nearly all solar technoloy cables can be processed. Simple strippin even with multi-layer insulation. Cables up to Ø 3.0 Strippin V-shapes with KL For flexible and solid conductors from to 6 2. Adjustable lenth stop from 5 to 12. Your benefits: The V-shaped blade enables precise strippin of flexible conductors. The required strippin lenth can be set precisely also to individual requiremens. Type for workin under live voltae: KL IS. 481

56 Easily replaceable blade system Adjustable lenth stop from 5-12 Hand tools Wire strippin tools K43/2 Automatic strippin tool Strippin rane ² Self-reulatin cuttin and strippin tool for standard cable and conductor Easily replaceable blade system Precise adjustability for strippin of thin insulations without damain the conductor Interated side cutter Strippin rane ² weiht Packin Automatic wire strippin tool K Accessories Pae Interchaneable die black for wire stripper K ² Interchaneable die set red for wire stripper K432 For PTFE-insulated conductors ² Interchaneable die set blue for wire stripper K432 up to 16 ² K432E K432E2 K432E3 K 44 Automatic wire stripper Strippin rane 1-25 ² Automatic wire strippin tool with adjustable stop Strippin lenth up to 22 Strippin lenth up to 22 Strippin rane ² weiht Packin Automatic wire strippin tool with adjustable stop K Wire stripper For all standard flexible and solid conductors from ² Adjustable lenth stop from 5-12 Interated easy to reach side cutter up to max. 2 Ø Dimensions weiht Packin Wire stripper KL

57 Flat cable: barin and strippin 2 or 3-core PVC-insulated flat cables from Optical lenth dimension 8-24 (5/16-1 inch) Barin and strippin of all standard, flexible cables from 1.5 ² ² (15-9 AWG) in the solar technoloy sector. 5-fold adjustable fine settin Hand tools Wire strippin tools Wire stripper All standard round and flat cables Fine adjustment (5-way) on various cable types and cable diameters ² Flat cable: barin and strippin 2 or 3-core PVC-insulated flat cables from ² Round cable: Barin and strippin flexible cables in the rane of ² (20-6 AWG), solid conductors ² (20-8 AWG) Optical lenth dimension 8-24 (5/16-1 inch) Interated side cutter to max. 3 Ø Dimensions weiht Packin Wire stripper KL765FR Automatic wire stripper for all standard round cables used in the solar technoloy sector Barin and strippin of all standard, flexible cables from 1.5 ² ² (15-9 AWG) in the solar technoloy sector. 5-fold adjustable fine settin Interated side cutter to max. 3 Ø Optical linear measure 8-24, 5/16-1 inch. Dimensions weiht Packin Automatic wire stripper for photovoltaic KL765PV

58 Quick and easy wire strippin. Strippin tools for round, moistureproof and coaxial cables. Round, moisture-proof and coaxial cables often et stripped usin knives. Certainly a quick way but is it also an effective one? The insulation of the individual wires can et damaed. The risk of injury is hih. And in terms of precision the cuts are anythin but exemplary. Klauke's special strippin tools eliminate these problems. You can strip a cable in just one action. Very fast. Very simple. And very safe. Strippin and splittin in one operation. Strippin tools for round and moistureproof cables. Wire stripper for coaxial cables. Up to Ø

59 K 400: for cables up to Ø 40. Interchaneable hooks for diameters from 6 to 25 and 20 to 40. Blade always rebounds to its oriinal position. Also suitable for window cuts. Your benefits: Hih flexibility due to a broad rane of cable diameters. No damae to cuttin blade hih durability. Time savin as window cuts for tap conductors can be made quickly and precisely. Stepless for Ø from 4 to 28 : KL 745 HK. Stepless adjustment of cuttin depth. For all standard round cables from Ø 4 to 28. Removable reducin adapter of extremely wear-resistant plastic. With hook blade and spare blade in the handle shell. Your benefits: No damae to the inner conductors. One tool for virtually all standard cables in buildin installation and in switch board construction. Short and flush wire strippin: KL 710 For round and moisture-proof cables from Ø 8 to 13. For flush strippin even in tiht areas. No need to adjust cuttin depth. Your benefits: One tool allows fast, flush strippin of a wide rane of cables in ceilins or walls and also in junction or distribution boxes and switch cabinets. 485

60 Max. cuttin depth: 4.5 Every cable knife contains a spare blade inside the handle. Every cable knife contains a spare blade inside the handle Hand tools Strippin tools Professional strippin tool for strippin profile K 400 Cable Stripper with exchaneable hooks Width of Max. cuttin depth: 4.5 Max. strippin diameter: 21 (small hook) Max. strippin diameter: 40 (lare hook) Dimensions weiht Packin Cable Stripper with exchaneable hooks K x 93 x Electricians knife without blade Every cable knife contains a spare blade inside the handle. Precise, fast and safe barin of all standard round cables No damae to inner conductor due to stepless adjustment of cuttin depth Dimensions weiht Packin Electricians knife without blade Electricians knife without blade KL KL Electricians knife with straiht blade Precise, fast and safe strippin of all standard round cables from 4-28 Ø Every cable knife contains a spare blade inside the handle Includin protective cover for the blade Removable reducin adapter made from extremely abrasion-resistant plastic (POM) No damae to inner conductor due to stepless adjustment of cuttin depth Dimensions weiht Packin Electricians knife with straiht blade KL745GK

61 Every cable knife contains a spare blade inside the handle Non-slip and safe workin due to eronomic handle Universal strippin tool for the followin functions: Hand tools Strippin tools Electricians knife with hooked blade Precise, fast and safe strippin of all standard round cables from 4-28 Ø Every cable knife contains a spare blade inside the handle Includin protective cover for the blade Removable reducin adapter made from extremely abrasion-resistant plastic (POM) No damae to inner conductor due to stepless adjustment of cuttin depth Dimensions weiht Packin Electricians knife with hooked blade KL745HK Spare blades KL749ES 2 1 Round cable stripper For Round and continental type cables from 8-13 Ø (e.. NYM 3 x 1.5 ² till 5 x 2.5 ²) Flush strippin even in hard-to-reach areas, e.. ceilin and walls, junction and distribution boxes, switch cabinets etc. Non-slip and safe workin due to eronomic handle No need to adjust the cuttin depth Dimensions weiht Packin Round cable stripper KL Multi stripper Universal strippin tool for the followin functions: Round cut Lonitudinal cut Strippin cuttin Dimensions weiht Packin Multi stripper KL

62 Knife protected Hand tools Strippin tools Photovoltaic-Stepper In pocket size for all standard PV-Cable up to 8.5 Replaceable blade system Knife protected Easy handlin Dimensions weiht Packin Photovoltaic-Stepper KL735PV

63 Hand tools Strippin tools 489

64 Professional processin of coax and twisted-pair cables. Tools for counication technoloy. Our rane offers quality professional tools for preparin coaxial cables and data lines. Procedures can be standardised. The quality of connections or joints is improved faults are prevented and complaints are bein omitted. The tools come either individually for retrofittin or in complete sets. Everythin you need for dressin coaxial cables and data lines is at hand with just one rip. Quick and easy cable dressin with Greenlee professional tools. Wire cutters for cross-sections up to Strippin tools for two and three-stae strippin. Crimpin tool for BNC, F and F compression plus. 490

65 Hand tools Strippin tools Kwik-Stripper Coax UTP/STP wire strippin tool Kwik Stripper with CATV and UTP/STP holder Interchaneable knife holders RG6/RG59 holder for strippin cable sheath to 6.4 and insulator to 6.4 RG6/RG59 holder for strippin cable sheath to 6.4 and insulator to 6.4 The UTP/STP holder strips 4-pair UTP/STP cables without damain the individual conductors Spare holder interated into tool Extra lare finer openin Colour-coded holder, blue for UTP/STP and black for coaxial cable Prepared stops eliminate the need for additional measurin and calibration Kwik-Stripper Coax UTP/STP wire strippin tool Accessories Pae Spare holder UTP/STP Spare casette RG6 & RG Spare casette RG7 & RG Coax stripper No need to adjust the cuttin depth Flexible cables, e.. 3 x 0.75 ², 10 ² and 16 ² Flexible cables, e.. 3 x 0.75 ², 10 ² and 16 ² Step-by-step strippin of all standard coaxial cables (e.. antenna and transmission cables) from external diameter Step-by-step strippin of all standard coaxial cables (e.. antenna and transmission cables) from external diameter Coax stripper KL

66 Hand tools Strippin tools Kwik Stripper Coax wire strippin tool - 2 stae Preset for 3 different cable types Removes braidin and insulator to 6.4 Removes braidin and insulator to 6.4 Dresses coaxial cable types RG58, RG59, RG62 and RG6 and many more Blade adjustable to cuttin depth Quick and simple interchaneable blade holder Frame takes only 2-stae holders Kwik Stripper Coax wire strippin tool - 2 stae Accessories Pae Spare holder - 2 stae Kwik Stripper Coax wire strippin tool - 3 stae Preset for 3 different cable types Dresses coaxial cable types RG58, RG59, RG62 and RG6 and many more Dresses coaxial cable types RG58, RG59, RG62 and RG6 and many more Blade adjustable to cuttin depth Quick and simple interchaneable blade holder The frame takes both 2 and 3 stae holders Kwik Stripper Coax wire strippin tool - 3 stae Accessories Pae Spare holder - 3 stae Spare holder - 2 stae

67 Hand tools Strippin tools Crimpin tool for XFC F-type compression plu Special crimpin tool for weather-resistant F-type compression plu Eronomic handles Eronomic handles Adjustable to all makes of compression plu Dual protection with external sleeve and internal O-rin Sleeves colour-coded for simple identification Simple processin with practically all compression tools Less effort than traditional hex-crimpin Crimpin tool for XFC F-type compression plu Accessories Pae XFC plu for RG6, 50 piece, black XFC plu for RG6, four-way screen, 50 piece, blue XFC plu for RG59, 50 piece, red Wire strippin tool DN-AW2 Special peelin and strippin tool for data, control and counication conductors Strippin: diameter Strippin: diameter 6 presetable diameters 0.25 ; 0.3 ; 0.4 ; 0.5 ; 0.6 ; presetable diameters 0.25 ; 0.3 ; 0.4 ; 0.5 ; 0.6 ; 0.8 Interated cable cutter and lenth stop Wire strippin tool DN-AW2 DNAW2 493

68 Modular connectors of type RJ10 4P4C, RJ11 6P4C, RJ12 6P6C and Hand tools Strippin tools Wire strippin tool DN-AW3 Precision wire strippin tool for peelin sinal, telephone, AV, control and data transmission cables made from copper and optical fibre 9 adjustable cuttin depths Cable capacity: diameter Cable capacity: diameter Insulation thickness: up to 1 Interchaneable blade holder Incl. a holder with spare blade Wire strippin tool DN-AW3 DNAW3 Accessories Pae Spare holder for DN-AW3 DNAW3M 494 Ratchet crimpin tool for telephone lines Interated cuttin and strippin tool for ribbon cable RJ45 8P8C Modular connectors of type RJ10 4P4C, RJ11 6P4C, RJ12 6P6C and RJ45 8P8C The full radius ratchet mechanism permits consistent terminations with each operation The full radius ratchet mechanism permits consistent terminations with each operation Straiht access uarantees consistent crimp connection Eronomic handle for easy operation Ratchet crimpin tool for telephone lines

69 Hand tools Strippin tools 495

70 Product roup index 496

71 Product roup index Holemakin tools Round and special shape punches 498 Standard punch systems 500 Slu Buster slu splittin punches 502 SLUG-SPLITTER Punches (stainless steel) 503 Special shape punches 506 Punchin tools and sets 518 Mechanical and hydraulic punchin tools 520 Knockout punch sets 527 Hole saws 536 HSS bi-metal hole saws 538 carbide tipped hole saws 543 Bits and step bits

72 Die-free after every punchin operation! Efficient punchin with Slu Buster and Slu Splitter. Greenlee punchin tools are characterized by extremely hih-quality workmanship. Lon durability and ease of use o toether without sayin. The standard tools as well as the Slu Buster rane are suitable for punchin steel, aluminium and plastic. The Slu Splitter rane is also suitable for stainless steel. Fix the die and start punchin. For holes from 12.5 to For sheet metal up to 3.5 thickness. Extremely hih capacity and lon durability. For hydraulic and manual operation. 498

73 Efficient punchin and splittin: Slu Buster and Slu Splitter. Patented punchin profile splits the slus into two halves. Innovative cuttin edes reduce effort. Benefits: The slus fall free from the die savin you time. Increased efficiency resultin from fast operations with little effort. Extended lifetime. More on Pae 502. Fits any tool: Greenlee tools are compatible. All punchin tools are compatible and can be used with punch drivers from other manufacturers. Benefits: The investment framework remains manaeable. Our punchin tools at a lance: Mild steel/ Aluminium/ Plastic Stainless steel Selfcenterin Splits the slus Manual Hydraulic Dimensions in Material thickness Standard 12,5 143,7 <=3 Slu Buster 12,5 64 <=3 Slu Splitter 15,2 64 <=3.5 Slu Splitter SC 22,5 61,5 <=

74 Draw stud 9.5, pilot drill Ø Punch unit includin punch, die and draw stud Holemakin tools Round and special shape punches Standard punch systems Ball bearin draw stud reduces workin force Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply for manual operation Punch unit includin punch, die and draw stud for manual operation True dimension Punch size Standard size P ISO Max. material thickness Mild steel Complete Unit Punch Individual parts for manual operation Die Draw stud with ball bearin 12.7 P P ball bearin nut Spacer Spacer Draw studs + accessories for hydraulic units Draw studs LS 50 LFLEX LS 60-L 16.2 ISO P 13 ISO P ISO P P P P ISO ISO P Adapter sleeves 19.0/

75 Holemakin tools Round and special shape punches True dimension Punch size Standard size P ISO Max. material thickness Mild steel Complete Unit Punch Individual parts for manual operation Die Draw stud with ball bearin 60.0 P ISO ball bearin nut Spacer Spacer Draw studs + accessories for hydraulic units Draw studs LS 50 LFLEX LS 60-L Adapter sleeves 19.0/

76 Draw stud 9.5, pilot drill Ø Patented punch unit includes punch, die and draw stud for manual and hydraulic operation * Screw without ball-bearin Holemakin tools Round and special shape punches Slu Buster slu splittin punches Unique punch profile Splitted slus fall free and can be removed easily Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Patented punch unit includes punch, die and draw stud for manual and hydraulic operation Order info * Screw without ball-bearin True dimension Punch size Standard size P ISO Max. material thickness Mild steel Complete Unit Individual parts for manual operation Punch Die Draw stud with ball bearin 12.5 P 7 ISO Draw studs LS 60 Plus P ISO P P 13 ISO P ISO P P ISO P ISO P ISO P P ISO

77 Draw stud 11.1, pilot drill Ø * Slu Splitter SC - self-centerin Holemakin tools Round and special shape punches SLUG-SPLITTER punch set (stainless steel) Unique punch profile Splitted slus fall free and can be removed easily Stainless, mild steel, plastic and aluminium up to 3.5 thick Stainless, mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 11.1, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Heavy duty punch unit includin punch and die Heavy duty punch unit includin punch and die Order info * Slu Splitter SC - self-centerin True dimension Punch size Standard size P ISO Max. material thickness * Stainless steel Complete Unit Punch Spare parts Die Draw studs for hydraulic units LS 60 Plus P ISO P P 13 ISO P * * * ISO P * * * ISO * * P ISO * * P * * ISO P P * * ISO

78 To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Holemakin tools Round and special shape punches Draw studs for manual operation To re-order draw studs, simply compare the existin ones with the ones illustrated here. Sizes iven are diameter x lenth Subject to tolerance deviations Order info To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Draw studs for manual operation 28.6 X Draw studs for manual operation 19.0 X Draw studs for manual operation 19.0 X Draw stud for manual operation 19.0 x Draw stud for manual operation 9.5 x Draw studs for manual operation 6.5 X

79 To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Holemakin tools Round and special shape punches Draw studs for hydraulic operation Order info To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Adapter 28.6 x Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Draw studs for hydraulic operation 19.0 X Draw studs Ø 19 x Draw studs Ø 11.1 x Draw studs 9.5 to Adapter 19.0 x 48 with internal thread Adapter 19.0 x 48 with internal thread Adapter 19.0 x 48 with internal thread

80 Mild steel, plastic and aluminium up to 3 thick and stainless steel up to Ø 9.7 pilot drill Ø 12.7 pilot drill Ø 15.9 pilot drill * = only for use with hydraulic punch drivers , , LS60L and LS50LFLEX Holemakin tools Round and special shape punches Rectanular punches 1.5 Mild steel, plastic and aluminium up to 3 thick and stainless steel up to 1.5 Punchin of burr-free openins Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 30.2 pilot drill Ø 9.7 pilot drill Ø 12.7 pilot drill Ø 15.9 pilot drill Ø 30.2 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Order info * = only for use with hydraulic punch drivers , , LS60L and LS50LFLEX ** = only for use with hydraulic punch drivers and Counter nut Punch Die Draw studs Ball bearin nut Punch size Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers 11.1 x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hydr x Hydr x Hydr x Hydr x Hydr x Hydr.* x Hydr.* x Hydr.* x Hydr.* x Hydr.**

81 Mild steel, plastic and aluminium up to 3 thick and stainless steel up to Ø 9.7 pilot drill Ø 12.7 pilot drill Ø 15.9 pilot drill * = only for use with hydraulic punch drivers , , LS60L and LS50LFLEX Holemakin tools Round and special shape punches Square punches 1.5 Mild steel, plastic and aluminium up to 3 thick and stainless steel up to 1.5 Punchin of burr-free openins Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 30.2 pilot drill Ø 9.7 pilot drill Ø 12.7 pilot drill Ø 15.9 pilot drill Ø 30.2 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Order info * = only for use with hydraulic punch drivers , , LS60L and LS50LFLEX ** = only for use with hydraulic punch drivers and Counter nut Punch Die Draw studs Ball bearin nut Punch size Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers 12.7 x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr x Hand/hydr ,0 x 45,0 3,0 Hydr , x Hydr x Hydr x Hydr x Hydr.* x Hydr.* x Hydr.**

82 Mild steel, plastic and aluminium up to 2 thick Holemakin tools Round and special shape punches Special square punch with flattened corners Mild steel, plastic and aluminium up to 2 thick Punchin of burr-free openins Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 12.7 pilot drill Ø 12.7 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Counter nut Punch Die Draw studs Ball bearin nut A Punch size B Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr

83 Holemakin tools Round and special shape punches Oiltiht punch Mild steel, plastic and aluminium up to 3 thick Mild steel, plastic and aluminium up to 3 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 15.9 pilot drill Ø 15.9 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Counter nut Punch Die Draw studs Ball bearin nut Punch size A B C Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr Hand/hydr

84 and available only as punch unit Holemakin tools Round and special shape punches "D" special shape punch Mild steel, plastic and aluminium up to 2 thick Mild steel, plastic and aluminium up to 2 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 12.7 pilot drill Ø 12.7 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Order info and available only as punch unit Counter nut Punch Die Draw studs Ball bearin nut A Punch size B Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr , Hand/hydr ,1 17,9 Hand/hydr ,

85 All punches available only as punch unit Holemakin tools Round and special shape punches Double-"D" special shape punch Mild steel, plastic and aluminium up to 2 thick Mild steel, plastic and aluminium up to 2 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 15.9 pilot drill Ø 15.9 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Order info All punches available only as punch unit Counter nut Punch Die Draw studs Ball bearin nut A Punch size B Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr , Hand/hydr , Hand/hydr , Hand/hydr , Hand/hydr ,

86 Holemakin tools Round and special shape punches Keyway punch Mild steel, plastic and aluminium up to 2 thick Mild steel, plastic and aluminium up to 2 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 23.8 pilot drill Ø 23.8 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Counter nut Punch Die Draw studs Ball bearin nut A Punch size B Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr , Hand/hydr , Hand/hydr , Hand/hydr ,

87 Holemakin tools Round and special shape punches Cylinder lock punch Mild steel up to 1.5 thick and aluminium up to 3.5 Mild steel up to 1.5 thick and aluminium up to 3.5 Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 12.7 pilot drill Ø 12.7 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Counter nut Punch Die Draw studs Ball bearin nut Punch size A B C Max. material thickness Mild steel Operation Complete Unit Punch Die Draw studs Individual parts for manual operation ball bearin nut Counter nut Spacer Spacer Mountin hole Ø Optionally available Adapter for hydr. punch drivers Hand/hydr ,

88 Mild steel up to 1.5 thick and aluminium up to 3.5 Holemakin tools Round and special shape punches Sub-Min-D-punch Mild steel up to 1.5 thick and aluminium up to 3.5 Front or rear mountin Operation: Manual and hydraulic Manual and hydraulic Predrillin: Ø 12.7 pilot drill Ø 12.7 pilot drill Scope of supply Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Punch unit includin punch, die, draw stud, counter nut and ball-bearin nut Standard Number Pole Operation Complete Unit Dimension A B C Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut Optionally available Adapter for hydr. punch drivers Hand/hydr Hand/hydr RS Hand/hydr Hand/hydr Hand/hydr

89 Rectanular punches for heavy duty connectors feature a drillin ji built into the die, for drillin the 4 locatin holes. Holemakin tools Round and special shape punches Special shape punches for heavy duty connectors Mild steel up to 3 thick and aluminium up to 3.5 Mild steel up to 3 thick and aluminium up to 3.5 Operation: Hydraulic Hydraulic Predrillin: Ø 30.2 pilot drill Ø 30.2 pilot drill Rectanular punches for heavy duty connectors feature a drillin ji built into the die, for drillin the 4 locatin holes. Scope of supply Punch unit includin punch, die, draw stud and counter nut Punch unit includin punch, die, draw stud and counter nut Punch size Max. material thickness Mild steel Operation Complete Unit Individual parts for manual operation Punch Die Draw studs ball bearin nut Counter nut 36,0 x 52,0 3,0 Hydraulic ,2 36,0 x 65,0 3,0 Hydraulic ,2 36,0 x 86,0 3,0 Hydraulic ,2 36,0 x 91,0 3,0 Hydraulic ,2 36,0 x 112,0 3,0 Hydraulic ,2 46,0 x 86,0 3,0 Hydraulic ,2 Mountin hole Ø 46,0 x 112,0 3,0 Hydraulic ,2 Optionally available Adapter for hydr. punch drivers 515

90 To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Holemakin tools Round and special shape punches Draw studs for special shaped punches Order info To increase service life, we recoend to lubricate the draw studs with Greenlee assembly paste no Draw studs for special shape punch 19.0 x Draw studs for special shape punch 12.7 x Draw studs for special shape punch 12.7 x Draw studs for special shape punch 9.5 x Draw studs for special shape punch 9.5 x Draw studs 9.5 x Draw studs for special shape punch 9.5 x Draw studs for special shape punch 6.3 x

91 Holemakin tools Round and special shape punches 517

92 Force for punchin up to Hydraulic punch drivers for manual and battery powered operation. Whether hand, foot or battery operated all hydraulic punch drivers serve one purpose only: to punch holes. Yet contrary to popular opinion personal preferences have very little to do with choosin a punch driver. Punch drivers are suitable for different applications or for holes up to certain sizes. In addition punch drivers offer specific benefits bein more or less important for applications concerned. Hydraulic punch drivers for hand operation with straiht head. Hydraulic punch drivers for hand operation with anled and rotatin head. Hydraulic punch drivers for foot operation. Hydraulic punch drivers for battery and mains operation. Greenlee punchin tools facilitate punchin operations in different shapes and sizes. 518

93 Battery-powered punch driver for every anle: LS 50-L FLEX Compact desin with hih punchin force and automatic limit switch. head rotates 135 in both directions. Benefits: The combination of compact desin and hih punchin force allows punchin of comparatively lare holes. The rotatin head allows operations in hard to reach areas. The interated control increases wear and tear and lifetime of tools and thus safes money. LS 60-L: Punches 60 (PG48) holes in 8 seconds and stops automatically. Punches 60 (PG48) holes in mild steel up to 3 in just 8 seconds. Interated micro processor control stops once punchin operation is complete. Benefits: Sinificantly faster punchin operations save you time. The interated control increases wear and tear and lifetime tools and thus safes money. More on Pae 518. Generates force for holes up to Foot pump and ram punchin capacity 110 kn. Suitable for very lare holes. Benefits: Foot operation frees both hands to operate punch. The hih punchin capacity allows punchin holes up to diameter round or 138 x 138 square. Benefits of hydraulic punch drivers. Hand operation Foot operation Battery/ mains operation Max. hole, round Max. hole, square Max. punchin force Quick Draw TM x kn Automatic stop Quick Draw TM x kn LS 50-L FLEX x kn LS 60-L x kn Hydraulic punch driver with hand pump x kn Hydraulic punch driver with foot pump x kn 519

94 Mild steel up to 3 thick Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Holemakin tools Punchin tools and sets Keyway punch Time-savin punchin of slots for anti-twist protected parts Mild steel up to 3 thick Manual operation Keyway punch Spare Spare punch for keyway punch Spare die for keyway punch Hydraulic punch driver Kwik Draw 7804E ideal for fast, straiht-on front panel punchin Compact desin Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Round punches up to ISO 63 (64 Ø) Hydraulic punch driver with straiht head Hydraulic punch driver with straiht head Technical data Dimension: Punchin force: Weiht: Lenth with draw studs , lenth without draw studs kn 2.5 k Kwik Draw 7804E Scope of supply Pae Hand hydraulic punch driver 7804E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter 19.0 x 48 with internal thread Plastic case

95 Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Holemakin tools Punchin tools and sets Hydraulic punch driver Kwik Draw 7904E ideal for fast, straiht-on front panel punchin Head rotates 180 for maximum flexibility Hydraulic punch driver with 90 head Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Round punches up to ISO 63 (64 Ø) Compact desin Compact desin Technical data Dimension: Punchin force: Weiht: kn 3.35 k Kwik Draw E Scope of supply Pae Hand hydraulic punch driver 7904E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter Plastic case Manual hydraulic driver Flexible head for multi-purpose use even in hard-to-reach areas Complete set incl. draw studs, pilot drill and spacer in plastic case Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Round punches up to ISO 63 (64 Ø) Pivoted and slewable Pivoted and slewable Technical data Dimension: Punchin force: Weiht: max. 340 x 150 x kn 5 k Revolvin/rotatable 360 Hand-Hydraulic punchin set ISO Scope of supply Pae Draw studs 9.5 to HSS Co5 step bits Spacer, short Plastic case 521

96 Punches up to x mild steel and 2.0 thick Holemakin tools Punchin tools and sets Battery powered punch driver LS 60-L Eletro-hydraulic punch driver with microprocessor control Automatic stop makes the punchin tools last loner Automatic retraction Automatic battery chare status detection Lithium-Ion battery technoloy Punches up to x mild steel and 2.0 thick Punches 92 x 92 or 46 x 92, 68 x 68 or ISO 63 (64 Ø) round in 3 mild steel Suitable for 96 round in mild steel Suitable for Slu Splitter up to 64 round stainless steel Technical data Punchin force: Punchin capacity: Weiht: Punchin time: Head outside diameter: Piston stroke: Total heiht: Width: 60 kn Special shape punch x (ST37 2 ) Round punches 96 (ST / VA 1.5 ) 3.9 k 5s at Ø 22.5, 3 mild steel 12s at Ø 61.5, 3 mild steel 90 punches/battery at Ø 22.5 and 3.5 mild steel 170 punches/battery at Ø 22.5 and 3.5 mild steel 250 punches/battery at Ø 22.5 and 2.5 mild steel Battery powered punch driver LS 60 L LS60L Scope of supply Pae Draw studs for hydraulic operation 9.5 X Spacer, short Adapter 19.0 x 48 with internal thread HSS Co5 step bits Plastic case KKLS60LGL Quick-charer for 18V Li-Ion-Batteries LGL1 378 Battery 18 V / 3.0 Ah, Li-Ion (54 Wh) RAL2 376 Accessories Pae Impulse charer 230V LG4FGL 522

97 Holemakin tools Punchin tools and sets Battery powered punch driver LS 50-L FLEX Flexible battery-powered hydraulic punch driver Rotatin head Lithium-Ion battery technoloy Punchin capacity: Special shape punch 92 x 92 (ST37 2 ) Round punches 80 (ST37 3 / VA 2 ) automatic limit stop punchin force 50 kn Weiht incl. batteries (3 Ah/18V) 2.9 k Complete set incl. draw studs, pilot drill and spacer, battery and charer in case Technical data Capacity Punchin force: Weiht: Drive motor: Battery voltae: Battery capacity: Charin time: Punchin time: 120 punch operations at Ø 22.5, 3.4 mild steel resp. 190 punch operations at Ø 22.5, 3 mild steel resp. 280 punch operations at Ø 22.5, 2.5 mild steel 50 kn approx. 2.9 k DC-permanent field motor 18 V DC Hydraulic oil: Rivolta S.B.H. 11 Ambient temperature: Sound level 3 Ah (RAL2/BL1830) or 1.5 Ah (RAL1/BL1815) 22 min. (RAL2/BL1830) or 15 min. (RAL1/BL1815) 5 s at Ø 22.5, 3 mild steel 6 s at Ø 63.5, 3 mild steel -20 C up to +40 C 70.6 db (A) in 1 m distance Battery powered punch driver LS 50-L FLEX LS50LFLEX Scope of supply Pae Quick-charer for 18V Li-Ion-Batteries LGL1 378 Battery 18 V / 3.0 Ah, Li-Ion (54 Wh) RAL2 376 Draw studs for hydraulic operation 19.0 X Spacer, short HSS Co5 step bits Draw studs 9.5 to Plastic case KK50LFLEX 523

98 All punches With handpump, hose and cylinder Holemakin tools Punchin tools and sets Hydraulic punch driver With handpump, hose and cylinder Compact desin All punches Up to round and 138 x 138 square Suitable up to 3.5 mild steel and 3.5 stainless steel (dependin on punch size) Operation: Hydraulic Hydraulic With handpump, hose and cylinder Covers ranes up to 138 x 138 Technical data Punchin force: Weiht: 110 kn 8.3 k Hydraulic punch driver with handpump, hose and cylinder Scope of supply Pae Hydraulic cylinder Draw studs 9.5 to Spacer, short Spacer bush, centre Spacer, lon Kwik Stepper step bit Hydraulic hand pump Hih pressure hose Draw studs for hydraulic operation 19.0 X

99 For all punches With footpump, hose and cylinder Increases service life - for statically and dynamically hihly stressed thread connections Holemakin tools Punchin tools and sets Hydraulic punch drivers With footpump, hose and cylinder For all punches Up to round and 138 x 138 square Suitable up to 3.5 mild steel and 3.5 stainless steel (dependin on punch size) Operation: Hydraulic Hydraulic With footpump, hose and cylinder Covers ranes up to 138 x 138 Technical data Punchin force: Weiht: 110 kn 15.2 k Hydraulic punch drivers with footpump, hose and cylinder Scope of supply Pae Hydraulic cylinder Spacer, short Spacer bush, centre Spacer, lon Kwik Stepper step bit Hydraulic foot pump Hih-pressure hose 6.4 x 3 m Draw studs 9.5 to Draw studs for hydraulic operation 19.0 X Assembly paste Statically and dynamically hih stressed thread connections Statically and dynamically hih stressed thread connections Increases service life - for statically and dynamically hihly stressed thread connections 30 tube Assembly paste

100 Punchin capacity to 3 mild steel, punchin rane 15.2 to 34.6 Punchin capacity to 3 mild steel, punchin rane 15.2 to Holemakin tools Punchin tools and sets C-frame punch driver Fast, one shot punchin - no predrillin of pilot holes required Punchin capacity to 3 mild steel, punchin rane 15.2 to 34.6 For operation we recoend the hydraulic footpump 1725, , the handpump 767, or the electro-hydraulic pump Technical data Throat: Weiht: k Portable C-frame punch driver Scope of supply Pae Punch adapter Punch adapter Punch P Punch P Stamp Die P 16 (22.5 ) Die P 21 (28.3 ) Die Metal box Accessories Pae Punch P 9 (15.2 ) C-frame punch driver For use with standard punches and dies, punchin rane 15.2 to For use with standard punches and dies, punchin rane 15.2 to Punchin capacity to 3 mild steel, punchin rane 15.2 to For operation we recoend the hydraulic handpump 755, or the electro-hydraulic pump Technical data Throat: Weiht: k Portable C-frame punch driver Scope of supply Pae Die adapter Die adapter Die adapter Die adapter Die adapter Die adapter Hexaon nut Metal box

101 For punchin aluminium and copper up to 10 thick. Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Hydraulic punchin head LSK 120 Basic tool Fast and precise cuttin Punchin in just a few seconds Compact desin permits workin in tiht areas For punchin aluminium and copper up to 10 thick. Hole diameters: Centric punchin: 120 max. material width Technical data Max. operatin pressure max. 700 bar Max. compressive force 160 kn Dimensions (L x B x H): 234 x 174 x 88 Weiht: approx. 9.5 k Hydraulic punchin head LSK Accessories Pae Punches and dies Ø Accessories Pae Metal box Slu Buster punch set Complete set for all ranes from ISO Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual Manual Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster slu splittin set ISO 16 to Scope of supply Pae Slu Buster Punch Set ISO Draw stud for manual operation 9.5 x Draw stud for manual operation 19.0 x Ratchet Kwik Stepper step bit Plastic case

102 Draw stud 9.5, pilot drill Ø Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster punch set Complete set for all ranes from PG 9-21 and 30.5 Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual Manual Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster slu splittin set PG9-21 and Scope of supply Pae Slu Buster slu splittin set PG9-21 and Draw stud for manual operation 9.5 x Ratchet Kwik Stepper step bit Plastic case Slu Buster punch set Complete set for all ranes from ISO Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual Manual Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster slu splittin set ISO 16 to Scope of supply Pae Slu Buster Punch Set ISO Draw stud for manual operation 9.5 x Draw stud for manual operation 19.0 x Ratchet Kwik Stepper step bit Plastic case

103 Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster punch set Complete set for all ranes from PG 9-48 and 30.5 Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual Manual Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster slu splittin set PG9-48 and Scope of supply Pae Draw stud for manual operation 9.5 x Ratchet Slu Buster slu splittin set PG9-48 and Plastic case SLUG-SPLITTER punch set (stainless steel) ISO Unique punch profile Splitted slus fall free and can be removed easily Stainless, mild steel, plastic and aluminium up to 3.5 thick Stainless, mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 11.1, pilot drill Ø Draw stud 19, pilot drill Ø Draw stud 11.1, pilot drill Ø Slu Slitter punch set (stainless steel) ISO16/20/25/32/ Scope of supply Pae SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO Draw studs Ø 11.1 x Draw studs Ø 19 x Plastic case

104 Draw stud 19, pilot drill Ø Slu Buster slu splittin sets , , and Holemakin tools Punchin tools and sets SLUG-SPLITTER punch set (stainless steel) ISO Unique punch profile Splitted slus fall free and can be removed easily Stainless, mild steel, plastic and aluminium up to 3.5 thick Stainless, mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 11.1, pilot drill Ø Draw stud 19, pilot drill Ø Draw stud 11.1, pilot drill Ø Slu-Splitter punch set (stainless steel) ISO16/20/25/32/40/50/ Scope of supply Pae SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO SLUG-SPLITTER punch set (stainless steel) ISO Draw studs Ø 11.1 x Draw studs Ø 19 x Plastic case Plastic case For Slu Buster and Slu Splitter slu splittin sets Slu Buster slu splittin sets , , and Dimensions: 255 x 75 x 200 Plastic case

105 Draw stud 9.5, pilot drill Ø Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster hand hydraulic punch driver set Complete set for all ranes from PG 9-21 and 30.5 Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster hand hydraulic punch driver set PG 9 to 21 and SET Scope of supply Pae Hand hydraulic punch driver 7804E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter 19.0 x 48 with internal thread Slu Buster slu splittin set PG9-21 and Plastic case Slu Buster hand hydraulic punch driver set Complete set for all ranes from PG 9-21 and 30.5 Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster hand hydraulic punch driver set PG 9 to 21 and SET Scope of supply Pae Hand hydraulic punch driver 7904E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter 19.0 x 48 with internal thread Slu Buster slu splittin set PG9-21 and Plastic case

106 Draw stud 9.5, pilot drill Ø Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster hand hydraulic punch driver set Complete set for all ranes from ISO Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster hand hydraulic punch driver set ISO 16 to SET Scope of supply Pae Hand hydraulic punch driver 7804E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter 19.0 x 48 with internal thread Slu Buster Punch Set ISO Plastic case Slu Buster hand hydraulic punch driver set Complete set for all ranes from ISO Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Hydraulic Hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Slu Buster hand hydraulic punch driver set ISO 16 to SET Scope of supply Pae Hand hydraulic punch driver 7904E Draw studs for hydraulic operation 9.5 X Draw studs for hydraulic operation 19.0 X Spacer, short Adapter 19.0 x 48 with internal thread Slu Buster Punch Set ISO Plastic case

107 Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Manual hydraulic driver includin SB-Punch ISO Flexible head for multi-purpose use even in hard-to-reach areas Complete set incl. SB ISO 16-40, draw studs, pilot drill and spacer in plastic case Special shape punches up to a maximum size of 68 x 68 or 35 x 65 Round punches up to ISO 63 (Ø 64) Hand-Hydraulic punchin set ISO Scope of supply Pae TC-5 Nylon carryin case with belt loop Draw studs 9.5 to HSS Co5 step bits Spacer, short Plastic case Slu Buster Punch Set ISO Slu Buster punch set Unique punch profile Splitted slus fall free and can be removed easily Mild steel, plastic and aluminium up to 3 thick Mild steel, plastic and aluminium up to 3 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Complete system consistin of punch and die in 5 sizes Complete system consistin of punch and die in 5 sizes Slu Buster Punch Set ISO Accessories Pae Plastic case

108 Draw stud 9.5, pilot drill Ø Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster punch set Unique punch profile Splitted slus fall free and can be removed easily Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Complete system consistin of punch and die in 7 sizes Complete system consistin of punch and die in 7 sizes Slu Buster Punch Set ISO Accessories Pae Plastic case Slu Buster punch set Unique punch profile Splitted slus fall free and can be removed easily Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Complete system consistin of punch and die in 6 sizes Complete system consistin of punch and die in 6 sizes Slu Buster slu splittin set PG9-21 and Accessories Pae Plastic case

109 Draw stud 9.5, pilot drill Ø Holemakin tools Punchin tools and sets Slu Buster punch set Unique punch profile Splitted slus fall free and can be removed easily Mild steel, plastic and aluminium up to 3.5 thick Mild steel, plastic and aluminium up to 3.5 thick Operation: Manual and hydraulic Manual and hydraulic Predrillin: Draw stud 19, pilot drill Ø Draw stud 9.5, pilot drill Ø Draw stud 19, pilot drill Ø Scope of supply Complete system consistin of punch and die in 9 sizes Complete system consistin of punch and die in 9 sizes Slu Buster slu splittin set PG9-48 and Accessories Pae Plastic case

110 Deep cuts, fast chane. Bi-metal and carbide tipped hole saws and arbors. The ability to saw holes in different materials means the frequent use of hole saws. These tools are characterized by extremely lon durability. Their desin enables a quick and simple chane of hole saws. For nominal dimensions from 14 to 152. Suitable for various materials. Countersink hole saws ensure burr free holes for easy mountin of electrical outlets. 536

111 A solid back plate for precise concentricity. Solid back plate for increased stability. For installin wall outlets, haloen lihtins etc. Benefits: The reinforced back plate ives additional stability creatin more precise holes. Hole saws are multi-purpose tools meanin less tools needed. A little more: Cuttin depth up to Cuttin depth of For steel sheet, cast iron, brass, aluminium, fibrelass, wood and plastic. Benefits: These hole saws achieve deeper cuts than tools from other suppliers. You need just one hole saw for a rane of materials. For fast chane: Kwik Chane TM. Kwik chane arbors for rapid mountin of hole saws. Ejector sprin makes removal of slus easier. Benefits: Kwick chane arbors reduce toolin time thus savin you time as well. Easy removal of slus speedin drillin operations. More on Pae 543. The multi-purpose tool: HKP carbide tipped hole saw. Optimised chip clearance. Suitable for a rane of materials. Benefits: Safe and fast operations. One tool for many applications. 537

112 Positive rake variable pitch desin provides faster, easier cuttin Arbors have to be ordered separately, not included in scope of supply Holemakin tools Hole saws HSS hole saws Heavy duty back plate reduces vibration and ensures concentric runnin For mild steel, cast iron, brass, aluminium, fibrelass, wood and plastic For mild steel, cast iron, brass, aluminium, fibrelass, wood and plastic Positive rake variable pitch desin provides faster, easier cuttin Variable pitch desin Max. cuttin depth 41.3 Tooth hardness Rc Order info Arbors have to be ordered separately, not included in scope of supply Standard size Recoended cuttin speed r.p.m. True dimension Shanks as required weiht Steel sheet Cast iron Brass Aluminium Nominal size P ISO P 9 or ISO 16 or P P 13 or P ISO P ISO 32 or or P or ISO P

113 Holemakin tools Hole saws Standard size Recoended cuttin speed r.p.m. True dimension Shanks as required weiht Steel sheet Cast iron Brass Aluminium Nominal size P ISO P 42 or P ISO oder

114 Holemakin tools Hole saws HSS hole saw set HSS bi-metal hole saw set (830 PG) HSS bi-metal hole saw set (830) HSS hole saw set HSS hole saw set Description Nominal size (830 P) HSS hole saw set HSS hole saw set HSS hole saw set HSS bi-metal hole saw HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set HSS hole saw set (830) HSS hole saw set HSS hole saw set Arbor for HSS bi-metal hole saws Arbor for HSS bi-metal hole saws Arbor for HSS bi-metal hole saws SDS arbor for HSS hole saws Plastic case Plastic case Plastic case 540

115 Steel, non-ferrous metal, aluminium, cast iron, stainless steel, wood, plastic and buildin materials Consistin of hole saws 35, 68, 75, countersink for 68 hole saw, arbor with pilot drill and counter nut for hole saws and spare HSS pilot drill Ø 6.35 Sockets can be mounted flush with the wall. Steel, non-ferrous metal, aluminium, cast iron, wood, plastic and buildin materials Variable pitch desin Holemakin tools Hole saws Electro set with countersink Steel, non-ferrous metal, aluminium, cast iron, stainless steel, wood, plastic and buildin materials Scope of supply Consistin of hole saws 35, 68, 75, countersink for 68 hole saw, arbor with pilot drill and counter nut for hole saws and spare HSS pilot drill Ø 6.35 Sockets can be mounted flush with the wall. Ejector sprin for all hole saws from Ø 52 Countersink with two specially-hardened cuttin teeth Electro set with countersink 35/68/ HSS bi-metal hole saw set ISO 16 to 63 Steel, non-ferrous metal, aluminium, cast iron, wood, plastic and buildin materials Scope of supply ISO 16-63, incl. 7 hole saws and arbors and ISO 16-63, incl. 7 hole saws and arbors and Variable pitch desin Cuttin depth: HSS bi-metal hole saw set ISO 16 to

116 Sizes from Sizes from Holemakin tools Hole saws Arbor for HSS bi-metal hole saws Sizes from Sizes from Arbor Hole saws Ø includin Pilot drill Additionally available Pilot drill Arbor for HSS bi-metal hole saws Sizes from Sizes from Arbor Hole saws Ø includin Pilot drill Additionally available Pilot drill SDS arbor for HSS hole saws Sizes from Sizes from Arbor Hole saws Ø includin Pilot drill Additionally available Pilot drill SDS SDS

117 Steel, stainless steel, non-ferrous metals, plastics, liht buildin boards and wood to 4.5 thick Ejector sprin makes removal of slu easier Arbors not within scope of supply, please order separately Holemakin tools Hole saws Kwik Chane carbide tipped hole saw Kwik chane arbor allows to chane cutter heads with a simple push and turn Steel, stainless steel, non-ferrous metals, plastics, liht buildin boards and wood to 4.5 thick Ejector sprin makes removal of slu easier Trianular shank Trianular shank Order info Arbors not within scope of supply, please order separately Standard size Nominal size True dimension P P P 13 ISO P P P ISO P ISO P ISO Shanks

118 Steel, stainless steel, non-ferrous metals, plastics, liht buildin boards and wood to 4.5 thick Holemakin tools Hole saws Kwik Chane carbide tipped hole saw set Kwik chane arbor allows to chane cutter heads with a simple push and turn Steel, stainless steel, non-ferrous metals, plastics, liht buildin boards and wood to 4.5 thick Arbor Arbor Ejector sprin makes removal of slu easier Kwik Chane carbide tipped saw set PG 16, PG 21, 35, 45, ISO Kwik Chane carbide tipped saw set PG 16, PG 21, Kwik Chane arbor Sizes ; Sizes ; Kwik Chane arbor Kwik Chane arbor Pilot drill for arbor Pilot drill for arbor

119 Wood, chipboard, coated chipboard, pressboard, PVC, fibrelass, plaster board, porous concrete, claystone and clay tiles Groove permits easy removal of the drillin core Holemakin tools Hole saws HKP carbide tipped hole saw Easy chip removal with extra wide tooth pitch No cloin or burnin of carbide teeth Wood, chipboard, coated chipboard, pressboard, PVC, fibrelass, plaster board, porous concrete, claystone and clay tiles Groove permits easy removal of the drillin core Maximum cuttin depth: 60 Flute covers two third of the total lenth HKP carbide tipped hole saw 35 without arbor HKP carbide tipped hole saw 68 without arbor HKP carbide tipped hole saw 74 without arbor HKP carbide tipped hole saw set 35, 68 and 74 incl. trianular arbor, SDS arbor, HSS and HM pilot drill HKP carbide tipped set 68 incl. trianular arbor, HSS and HM pilot drill, countersink Accessories Pae Trianular shank, 70 lon, shank diameter

120 Cuts quick, clean and accurate holes in stainless steel, copper, aluminium and steel Holemakin tools Hole saws Carbide tipped hole saw Carbide tipped cuttin edes for lon service life and clean cuts Chaneable cobalt steel pilot drill with unique tip to prevent lon chips Cuts quick, clean and accurate holes in stainless steel, copper, aluminium and steel Flane stop prevents over drillin Maximum cuttin depth: 10 Maximum material thickness: 4 Standard size Recoended cuttin speed r.p.m. True dimension Minimum chuck size P ISO Stainless steel Steel sheet P P 13 ISO P ISO P ISO ISO Interchaneable pilot drill for carbide tipped hole saws Wood, aluminium, steel, plastic and fibrelass Wood, aluminium, steel, plastic and fibrelass Interchaneable pilot drill for carbide tipped hole saws 19 to Interchaneable pilot drill for carbide tipped hole saws

121 Cuts quick, clean and accurate holes in stainless steel, copper, aluminium and steel Holemakin tools Hole saws Carbide tipped hole saw set Carbide tipped cuttin edes for lon service life and clean cuts Chaneable cobalt steel pilot drill with unique tip to prevent lon chips Cuts quick, clean and accurate holes in stainless steel, copper, aluminium and steel Flane stop prevents over drillin Maximum cuttin depth: 10 Maximum material thickness: 4 Carbide tipped hole saw set PG 16, PG 21 and Scope of supply Pae Carbide tipped hole saw Carbide tipped hole saw Carbide tipped hole saw Plastic case Pilot drill 547

122 Step by step burr-free. Precise step bits milled usin the latest CNC technoloy. For burr-free drillin of sheet metal, pipes, non-ferrous metals, stainless steel and plastics. Step bits are top quality products and manufactured to latest standards usin CNC technoloy. For holes from 3.2 to 40. Suitable for a broad rane of materials. With spiral flute and ede breaker. Step bits are suitable for a wide rane of materials and surfaces. 548

123 Burr-free thanks to the ede breaker: Kwik Stepper TM step bits. For the burr-free drillin and reamin of sheet metal, pipes, nonferrous metals, stainless steel and plastics. Centerin, drillin and deburrin in one operation. Benefits: Step bits are multi-purpose tools and can be used for a wide rane of materials. Spiral flute for more holes and less effort. Spiral flute (DBGM) means less effort needed and improves cuttin performance. Benefits: Less effort means less wear and tear. The holes are more precise and operation is trouble free. 90 % transmission zone, no slippin ROTASTOP. Tool chane in seconds. Maximum torque transmission. 90 % transmission zone on the drills. Benefits: No more drill slippae makin your work more efficient. Tool chane more efficient and faster. Improved power transmission. Benefits of the individual bits. Step bits Hole diameter Ø of steps Ø Step sizes Ø Lenth Number Shank ,2 12,7 3,2 / 4,0 / 4,8 / 5,6 / 6,4 / 7,1 / 7,9 / 8,7 / 9,5 / 10,3 / 11,1 / 11,9 / 12, , ,8 12,7 4,8 / 6,4 / 7,9 / 9,5 / 11,1 / 12, , ,2 22, , ,8 22,2 4,8 / 6,4 / 7,9 / 9,5 / 11,1 / 12,7 / 14,3 / 15,9 / 17,5 / 19,1 / 20,6 / 22, , ,2 28,6 12,7 / 22,2 / 28, , ,2 34,9 22,2 / 28,6 / 31,0 / 31,8 / 34, , ,7 Pilot drill for Greenlee draw studs Ø , ,7 Pilot drill for Greenlee draw studs Ø , P 7 21 P7 / P9 / P11 / P13.5 / P16 / P21 / P , ISO For ISO dimensions 16 / 20 / 25 / , ,0 / 5,0 / 6,0 / 7,0 / 8,0 / 9,0 / 10,0 / 11,0 / 12, , ,0 / 6,0 / 8,0 / 10,0 / 12,0 / 14,0 / 16,0 / 18,0 / 20, , (2.0 steps) , (3.0 steps) , ISO For ISO sizes 12 / 16 / 20 / 25 / 32 / ,0 Rotastop 549

124 Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic For burr-free drillin of metal plates, pipes, non-ferrous metals, stainless steel and plastics. Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic Holemakin tools Bits and step bits Kwik Stepper step bit Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic For burr-free drillin of metal plates, pipes, non-ferrous metals, stainless steel and plastics. Drillin rane from Drillin rane Ø Step sizes Ø Total lenth Number of steps Shank Ø / 4.0 / 4.8 / 5.6 / 6.4 / 7.1 / 7.9 / 8.7 / 9.5 / 10.3 / 11.1 / 11.9 / / 6.4 / 7.9 / 9.5 / 11.1 / / 6.4 / 7.9 / 9.5 / 11.1 / 12.7 / 14.3 / 15.9 / 17.5 / 19.1 / 20.6 / / 22.2 / / 28.6 / 31.0 / 31.8 / For drillin pilot holes for Greenlee draw studs For drillin pilot holes for Greenlee draw studs P 7-21 For conduit threads (throuh holes) P7 / P9 / P11 / P13.5 / P16 / P21 / ISO For ISO sizes 16 / 20 / 25 / Kwik Stepper step bit with ROTASTOP shank Loner lifetime Less force needed Improved cuttin performance Smooth cuttin Minimum burr Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic Drillin rane from Drillin rane from

125 Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic Holemakin tools Bits and step bits Drillin rane Ø Step sizes Ø Total lenth Number of steps Shank Ø / 5.0 / 6.0 / 7.0 / 8.0 / 9.0 / 10.0 / 11.0 / / 6.0 / 8.0 / 10.0 / 12.0 / 14.0 / 16.0 / 18.0 / / 8.0 / 10.0 / 12.0 / 14.0 / 16.0 / 18.0 / 20.0 / 22.0 / 24.0 / 26.0 / 28.0 / / 9.0 / 12.0 / 15.0 / 18.0 / 21.0 / 24.0 / 27.0 / 30.0 / 33.0 / ISO For ISO sizes 12 / 16 / 20 / 25 / 32 / Combi bit set in plastic box M3 - M10 Drill, tap and deburr in one operation For use with mild steel,stainless steel, non-ferrous metals and plastics For use with mild steel,stainless steel, non-ferrous metals and plastics Nominal diameter corresponds to the max. material thickness Nominal diameter corresponds to the max. material thickness Combi bit set in plastic box M3 - M Scope of supply Pae Combi bit M Combi bit M Combi bit M Combi bit M Combi bit M Combi bit M Combi bit holder Kwik Stepper step bit set in metal box Loner lifetime Less force needed Improved cuttin performance Smooth cuttin Minimum burr Burrfree drillin of steel sheets, pipes, non-ferrous metals, stainless steel and plastic Drillin rane from 4-30 Drillin rane from 4-30 Kwik Stepper step bit set in metal box Scope of supply Pae Kwik Stepper step bit with ROTASTOP shank Kwik Stepper step bit with ROTASTOP shank Kwik Stepper step bit with ROTASTOP shank