PRODUCT CATALOGUE Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3

Transcription

1 BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77 7AG United Kingdom T: +44 (0) F: +44 (0) E: Registered in England No post@liveworkconsult.no PLEASE DON T BIN ME Pass me on to a colleague or recycle me! PC/0-203

2 boddingtonselectricalltd Product Catalogue Fully insulated tools Pages 2-56 Cable preparation tools Pages matting Pages insulating shrouding Pages Boddingtons Electrical has established itself as a leading manufacturer and supplier of insulated The company operates throughout the United Kingdom and exports to many countries worldwide. tools and electrical safety products. Whilst maintaining its traditions and values and providing products of the highest standard it boasts young, innovative design and manufacturing teams with the expertise to provide bespoke solutions. PERSONAL PROTECTIVE EQUIPMENT Pages An essential requirement of the continuing development of the Company s Quality Objectives is the maintenance of a Quality System registered to ISO 900 status. Disclaimer Whilst Boddingtons Electrical have made every effort to ensure the accuracy and reliability of the information contained in this catalogue, there may be variations as improvements and/or changes to the products are made from time to time. Boddingtons Electrical Limited Prospect House Queenborough Lane Great Notley Braintree CM77 7AG United Kingdom 6 T: +44 (0) F: +44 (0) CERTIFICATE FS53593 E: 7

3 Cable & Core Cutters with Levered Linkage (for copper and aluminium cables only) For smooth cutting of copper and aluminium conductors Replaceable cutting blades Razor sharp cutters guarantee a smooth and effortless cut Cutting without crushing the cable, leaving the cable end with very little deformation Blade made of chromium-molybdenum tempered steel Ratchet Cable Cutter Standard Version Single handed operation 00,000 times proven ratchet system Blade is released by a small lever Ideal for areas of restricted access Spare blades and parts available Only for use on copper or aluminium cables Part No Description Length Cutting Weight Insulated Capacity Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Ratchet Cable Cutter Standard Version 330 ø 32mm / 250mm x Cable and Core Cutter Copper 2040 P 300 Aluminium Spare Blade set for x Cable and Core Cutter P Cable and Core Cutter P Spare Blade for x Spare Blade for x Carrying Case for / x Cable & Core Cutter (for copper and aluminium cables only) Ratchet Cable Cutter Insulated Version Fully insulated to EN ,000V maximum working Single handed operation Blade is released by opening the handles Ideal for areas of restricted access Spare blades and parts available Only for use on copper or aluminium cables Insulating blade cover available * Head cover not included Controlled cutting power by means of carefully selected leverage Material high tensile forged steel Cuts aluminium and copper earth cable, plastic and rubber insulated up to 27mm diameter Part No Description Length Cutting Weight Insulated Capacity Ratchet Cable Cutter Insulated Version 30 ø 32mm / 250mm 2 80 P Insulating Head Cover P Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable and Core Cutter P Ratchet Cutters (for copper and aluminium cables only) Powerful two handed cutter Cable Cutters (for copper and aluminium cables only) Replaceable cutting head Double ratchet device with cam gearing Wide ranging virtually shatter proof, fixed and moving blade For cutting multi-stranded and fine wire copper and aluminium cables up to 62 or 80mm diameter Cutting head made of oil-hardened steel The razor sharp blades guarantee a smooth and effortless cut Light metal handles Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Suitable for use on thin steel sheathing or steel tape armoured cables (not suitable for hardened steel wire armoured cable) Tested EN/IEC 60900: Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Ratchet Cutter Single Handed P Cable Cutter approx P Ratchet Cutter Single Handed P Cable Cutter approx P Cable Cutter approx P Spare Blade for x Spare Blade for x Spare Blade for x 3

4 Rechargeable Cable Cutter (non-insulated) Suitable for LV and MV cables up to 4 x 50 mm sq aluminium and 4 x 95mm sq copper For copper and aluminium cables up to maximum of 50mm diameter Cross cutting of blades on ratchet cutter ensures exceptionally clean cut Approx 50 cuts with one battery charge Overload safety cut-out for protection of the tool Kit comprises: x rechargeable cable cutter, x 2 volt rechargeable battery, x battery charger 240V / 50Hz input supply, x tough plastic carrying case Part No Description L x B x H Cutting Capacity Cutting Weight Insulated ø Force [kn] Rechargeable Cable Cutter 345 x 35 x P (inc plastic carrying case) Spare Battery x Spare Blade - moveable x Steel Wire Cutters Replaceable steel cutting head Blunt blades for hardest types of wire Handles made of light metal Cable Cutters HV (for copper and aluminium cables only) Replaceable cutting head Fibre reinforced plastic handles Tested to 50kV, 60 Hz for one minute Cutting blades made of forged special tool steel, heat treated The razor sharp blades guarantee a smooth and effortless cut Part No Description Length Cu + Al Steel Round Jaw Weight Insulated Cable Wire ø Steel ø Opening [mm 2 ] Steel Wire Cutter P Steel Wire Cutter P Spare Blade for P Spare Blade for P ME-50S Part No Description Cutting Length Weight Insulated Capacity [mm 2 ] ME-50S Cable Cutter HV P ME-50SB Spare Blade for ME-50S x ME-250S Cable Cutter HV P ME-250SB Spare Blade for ME-250S x Bolt Cutters (insulated version) Chrome vanadium blade Tempered steel Adjustable handle position for working in confined spaces Part No Description Length Cutting Capacity ø Weight Insulated high tensile steel wires Bolt Cutter P Bolt Cutter P Bolt Cutter P Bolt Cutter P Bolt Cutter P Spare Blade for & x Spare Blade for & x Spare Blade for & x Spare Blade for & x Spare Blade for & x Bolt Cutters (non-insulated) Chrome vanadium blade Tempered steel Adjustable handle position for working in confined spaces Tree Pruners Blade manufactured from alloy steel with aluminium bottom jaw Jaws hardened and tempered to 35 HRC Blade induction hardened to 50 HRC Part No Description Length Cutting Capacity ø Weight Insulated high tensile steel wires Bolt Cutter x Bolt Cutter x Bolt Cutter x Bolt Cutter x Bolt Cutter x Part No Description Cutting Length Weight Insulated Capacity ø Tree Pruner - Double Pivot Jaw P 4 5

5 Ratchet Cutters Wide range of applications Single handed operation Well proven ratchet drive All steel parts are hardened Quick blade release allows fast backout in any position Can be used in confined areas Part No Description Length Width of Head Cross Section Diameter Weight Insulated [mm 2 ] Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter x Ratchet Cutter C Type Hand tool with low friction and solid technical drive For daily application Blade with needle bearing Quick blade release allows fast backout in any position Can be used in confined areas Universal and Steel Rope Cutter Single handed operation Well proven ratchet drive All steel parts are hardened Quick blade release allows fast backout in any position Wide range of application due to interchangeable cutting blades Part No Description Length Width of head Cross section Diameter Weight Insulated [mm 2 ] Cable Cutter P Spare Blades for Universal and Steel Rope Cutter Part No Blade Set B Application Cross Diameter Construction Section AL / CU 50mm 2 30 Flexible Steel Cable 0 Catenary wire 2 / 30 Type 8 ACSR DIN /.44 mm Weight: 00g Part No Description Length Width of Head Cross Section Diameter Weight Insulated Ratchet Cutter mm 85mm 2 25mm 945 x Ratchet Cutter mm 450mm 2 52mm 300 x Ratchet Cutter mm 330mm 2 36mm 400 x Ratchet Cutter mm 550mm 2 55mm 3000 x Part No Blade Set S Application Cross Diameter Construction Section AL / CU 350mm 2 50 Flexible Steel Cable 2 Catenary wire 240mm 2 50 Clean cut and little operating force Weight: 00g Part No Blade Set C Application Cross Diameter Construction Section AL / CU 300mm 2 50 Cuts big cross sections with little operating force, clean cut, appropriate for most flexible conductors Does not cut steel Weight: 00g Part No Blade Set S2 Application Cross Diameter Construction Section AL / CU 200mm 2 50 Flexible Steel Cable 2 Catenary wire 8 9/ ACSR DIN / 2.67 mm Steel Sheathed Hose 50 Structural Steel 235JR+AR 0 Solid Screws 8 Strength: 8.8 Part No Blade Set S Application Cross Diameter Construction Section AL / CU 300mm 2 50 Flexible Steel Cable 2 Catenary wire 8 9/ ACSR DIN / 2. mm Steel Sheathed Hose 50 Slight angular cut, increased operating force Weight: 00g Slight angular cut, increased operating force Colour code: blue Weight: 00g 6 7

6 Round Cable Cutter (for copper and aluminium cables only) Cable Cutters (for copper and aluminium cables only) Specially designed for cutting and stripping cable before the cable lug is applied. Suitable for cutting cables up to 35 mm 2 of soft, stranded copper and aluminium conductors Single handed operation Specially tempered tool steel Sharp, tempered precision cut blades Tested EN/IEC 60900: With screwed adjustable joint Manufactured from special tool steel, polished and burnished A clean easy cut based on its new style of cutting geometry For cutting multi-core earth, plastic and rubber cables of aluminium and copper up to a cable diameter of 20mm in one cut Suitable for cutting cable diameters up to 25mm when cutting in two stages Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Round Cable Cutter 70 approx P Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable Cutter 200 approx P Cable Cutters (for copper and aluminium cables only) Cable Cutters (for copper and aluminium cables only) Specially hardened burnished steel For cutting stranded and multi-fine wire conductors copper and multi fine wired conductors in copper and aluminium cables Specially designed for cutting and stripping cable before the cable lug is applied. Suitable for cutting cables up to 35 mm 2 of soft, stranded copper and aluminium conductors up to a diameter of 5mm. When 2 cuts are made, Single handed operation up to 8mm diameter cables are possible Specially tempered tool steel Sharp, tempered precision cut blades Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable Cutter 70 approx P Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable Cutter 200 approx P Cable Cutters (for copper and aluminium cables only) Specially designed for cutting and stripping cable before the cable lug is applied. Single handed operation Specially tempered tool steel Sharp, tempered precision cut blades Cable Cutter Heavy Duty (for copper and aluminium cables only) Must be positioned with both hands For rough handling and maximum performance Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable Cutter 20 approx P Part No Description Length Jaw Opening Material Cross Weight Insulated Section [mm 2 ] Cable Cutter 240 approx P 8 9

7 0 Cable Cutter EL type (for copper and aluminium cables only) Heavy duty Single handed use Part No Description Length Material Cross Weight Insulated Section [mm 2 ] PA968/0 Cable Cutter P Diagonal Side Cutters For hard and soft wires Inductively tempered blades Cutting power approx. 62 HRC Part No Description Length Cutting Rates Weight Insulated Ø (soft wire) Diagonal Side Cutter 60 > P Diagonal Side Cutter 80 > 4 35 P Diagonal Side Cutter Heavy Duty 200 > P Diagonal Side Cutter Heavy Duty 250 > P Combination Pliers Blades for hard and soft wire Long cutting edges for thicker cables Inductively tempered blades Cutting power approx. 60 HRC Made of specially tempered tool steel 2638 PA968/ Part No Description Length Cutting Rates Weight Insulated Ø (soft wire) 2636 Combination Pliers P 2638 Combination Pliers P Combination Pliers P Combination Pliers P Combination Pliers P Lineman's Pliers Material: Chrome Vanadium Finish: Mirror Chrome Tool Body hardness HRC 45 +/- 3 Cutting Edge hardness HRC 62 +/- 2 Polished chrome head Construction: High leverage design for Increased cutting power Part No Description Length Weight Insulated Pliers Lineman's P Long Nose Pliers Toothed grip Blades for hard and soft wire Inductively tempered blades Cutting power minimum 60 HRC End Wire Stripping Pliers With fine adjustment screw Made of tempered steel Polished chrome head For solid and stranded conductors of up to Ø 5mm Part No Description Length Weight Insulated 2736 End Wire Stripping Pliers P Water Pump Pliers Specially hardened toothed grip Strength of teeth approx. 65 HRC Clamping guard prevents injury Optimal leverage 7 Adjustable positions Made of tempered chrome vanadium steel Part No Description Length Weight Insulated Water Pump Pliers P Groove Joint Pliers 6 Adjustable positions Optimal leverage Made of tempered vanadium steel Polished chrome head Part No Description Length Weight Insulated Long Nose Pliers P Long Nose Pliers P Part No Description Length Weight Insulated Groove Joint Pliers P Groove Joint Pliers P

8 Plastic Flat Nose Pliers For meter connections and meter locking Without metal parts Part No Description Length Weight Insulated Plastic Flat Nose Pliers P Plastic Flat Nose Pliers, Round Jaw With rounded jaws Fibreglass reinforced, tough non-brittle plastic For changing cylindrical fuses Jaw openings : Ø mm and Ø 8mm Part No Description Length Weight Insulated 2738 Plastic Flat Nose Pliers, round jaw P Plastic Flat Nose Pliers, Short Jaw Solid design with excellent twisting and bending strength Fibreglass reinforced, tough non-brittle plastic For holding, bending and twisting of single wires Part No Description Length Weight Insulated 2758 Plastic Flat Nose Pliers, short jaw P Plastic Flat Nose Pliers, Long Jaw Fibreglass reinforced, tough non-brittle plastic For fitting and blocking meters For holding and inserting single wires Part No Description Length Weight Insulated Plastic Flat Nose Pliers, long jaws P Insulation Hole Cutter Insulation is pierced at a 4mm diameter and removed Eliminates need of piercing insulation with test probe Gives a safe measuring point Lowers risk regarding misreading and damage to testing device Insulation of tough non-brittle plastic Part No Description Length Hole Diameter Weight Insulated Insulation Hole Cutter P Insulation T-Bar Hole Cutter P Cable Knives (inc. blade cover) Moulded easy grip handle Strong fixed blade Blade of tempered stainless steel Insulation of tough non-brittle plastic Part No Description Length Length of Weight Insulated Blade Cable Knife with safety cap P 2830 Cable Knife with insulated blade with cap P Cable Knives Heavy Duty Blade (inc. blade cover) For stripping cables General stripping applications Easy grip handle Part No Description Length Length of Weight Insulated Blade Cable Knife Heavy Duty Blade P Cable Knife Straight Blade x Cable Knife with Guide Blade (inc. blade cover) Special blade with horizontal guide blade prevents damage for single cable conductors For slitting and removal of sheath Blade and horizontal guide blade sharpened Blade of tempered stainless steel Insulation of tough non-brittle plastic Part No Description Length Length of Weight Insulated Blade Cable Knife with Guide Blade P 3

9 Cable Knife with Replaceable Blade Commercial tapered blade Comfortable handle of impact resistant plastic Collapsible blade safety guard, firmly fixed to handle Blade can be separated from holder Cable Knife with Integrated Blade Safety Guard Straight solid blade with coated back Blade of tempered stainless steel Comfortable handle of impact resistant plastic Collapsible blade safety guard, firmly fixed to handle With replaceable blade 2852 Part No Description Overall Length of Weight Insulated Length Blade 2850 Cable Knife with Replaceable steel blade P 2852 Blade Holder for 2850/ x Part No Description Overall Length of Weight Insulated Length Blade Cable Knife with integrated blade safety guard P 2850 Spare Blade for x Cable Coring Knife with Ceramic Blade With built in blade cover For stripping cables Fully insulated High cutting capacity Minimum production quantity applies Part No Description Length Blade Weight Insulated Cable Coring Knife with Straight Ceramic Blade 85mm 46mm 68 P Cable Core Stripper Suitable for removal of insulation and sheathing from live armoured cables Exceptionally strong tough polymeric blade Unique handle moulded in softer plastic material to provide a cushion when a hammer is used to initiate a cut in the cable sheath Part No Description Nominal Weight Insulated Lift 20-CS Cable Core Stripper P Cable Knife - Heavy Duty Heavy duty fixed blade For cutting cable sheath and splitting lead joints Special shaped blade to ensure clean cut Hack / Coring Knives Originally developed for stripping the lead sheath from pilc cables Widespread application in the removal of the bedding compound from waveform cne cables without damage to the soft aluminium neutral earth wires Special shaped blade to ensure clean cut without damage to the underlying insulation allowing sheath of live cables to be safely removed CS Part No Description Length Weight Depth of Insulated Blade Cable Knife - Heavy Duty x Part No Description Length Weight Depth of Insulated Blade JTN-4 Plastic Hack Knife P JTN-6 Plastic Coring Knife P JTN-6 JTN-4 Cable Coring Knife with Curved Blade (inc blade cover) Lineman s Knife Non-slip finger grooves Blade manufactured of tempered stainless steel Curved blade for easy stripping Excellent cutting quality stays sharp Safety locking device Case with whetstone and revolution free joint Well balanced double-edged blade LE-325 With Case LE-325 In Case C99 Part No Description Overall Length of Weight Insulated Length Blade Cable Coring Knife with Curved Blade P Part No Description Blade Material Blade Length Overall Length Weight Insulated LE-325 Lineman s Knife with case Carbon Steel x 4 C99 Cable Coring Knife with Curved Blade x 5

10 Electrician s Knives Safety Box for Electrician s Scissors Blades manufactured from high carbon steel or stainless steel Durable blades Heavy duty folding knives MEK-50 MEK-60 Protective, impact resistant, resin case With turning safety clip Suitable for use with Electrician s Scissors Corrosion resistant Part No Description Blade Handle Blade Overall Weight Insulated Material Material Length Length Part No Description Length Weight Insulated Safety box for scissors 2 x 7 0 x MEK-50 Electrician s Knife curved blade Carbon Steel Hardwood x MEK-60 Electrician s Knife curved blade Carbon Steel Hardwood x Electrician s Knives Junior Hacksaw Lightweight Blades manufactured from high carbon steel or stainless steel Durable blades Heavy duty folding knives Corrosion resistant MDX-0 MEK-70M MEK-70 Strong compact frame Part No Description Length of Weight Insulated Blade Junior Hacksaw 32 tpi blade P Part No Description Blade Handle Blade Overall Weight Insulated Material Material Length Length 705 Spare Blade 32 tpi for x 7052 Special Wide Blade 8 tpi for x 7053 Special Wide Blade 24 tpi for x MEK-70 Electrician s Knife straight blade Carbon Steel Hardwood x MDX-0 Electrician s Knife straight blade Stainless Steel Hardwood x MEK-70M Electrician s Knife straight blade Stainless Steel ABS Plastic x Electrician s Scissors with LED warning The permanent built-in red LED warning light is designed to warn the user of any live voltage presence Working temperature 0/+50ºC, rel humidity 20/90% Hacksaw Lightweight Heavy duty frame Blade tension and blade Spare can be easily undertaken by using the wing nut device Working range V AC Requires 2 interchangeable batteries type LR4.5V Part No Description Length of Overall Weight Insulated Blade Length ATTENTION: The integrated electronics do not work on shielded cables Hacksaw 24 tpi blade P 7030 Spare Blade 24 tpi for x Spare Blade 8 tpi for x Part No Description Length Blade Weight Insulated Shape Bowsaw Electrician s Scissors with LED warning 40 Straight 80 x Electrician s Scissors Specially designed for the Fire & Rescue Service Provides protection for the user in potentially hazardous areas up to 000V maximum Two component handles Impact absorbing inserts Ergonomic, light and extra durable High cutting performance Blade tension and blade Spare can be easily undertaken by using the wing nut device Supplied with a protective plastic blade sleeve Part No Description Length Blade Weight Insulated Shape Electrician s Scissors 40 Straight 75 x Part No Description Length of Overall Weight Insulated Blade Length Bowsaw P 7060 Spare Blade for x 7

11 Depth Gauge Saw For controlled cutting of cable sheath Standard cutting depth 2mm Other lengths available on request Other depths available on request Reversible Ring Ratchet Wrench 3 CrV 3 Steel Double-sided ratchet wrench Strong torque for heavy duty Also available with insulated head Uninsulated available on request Part No Description Length of Weight Insulated Blade Depth Gauge Saw P Depth Gauge Saw P Part No Description Sizes Length Weight Insulated 673 Reversible Ring Ratchet Wrench 0 x P 677 Reversible Ring Ratchet Wrench 3 x P 679 Reversible Ring Ratchet Wrench 7 x P 672 Reversible Ring Ratchet Wrench 7 x P 6724 Reversible Ring Ratchet Wrench 9 x P 6726 Reversible Ring Ratchet Wrench 2 x P 6730 Reversible Ring Ratchet Wrench 24 x P 6732 Reversible Ring Ratchet Wrench 30 x P Reversible Ring Ratchet Wrench - Insulated Head Depth Gauge Saw For cable with sheet steel sheathing Adjustable stopper Replaceable saw-blade Notched saw-blade for soft materials Fine toothed saw-blade for sheet metal Part No Description Length of Weight Insulated Blade Universal Saw 24 tpi, fine P Spare blade 8 tpi, notched for x Spare blade 24 tpi, notched for x Torque Wrench Manufactured of alloyed and hardened steel Socket secured by expanding ball bearing Preset wrenches also available on request Customised socket sets available Suitable for all types of screwdriver heads Adjustment tolerance can be ± of the nominal value Anti-clockwise operation without limitation Part No Description Adjustable Length Weight Insulated Torque [Nm] 2822 Torque Wrench ¼ Sq Drive Mini P Torque Wrench ¼ Sq Drive Mini P Torque Wrench 3/8 Sq Drive P Torque Wrench 3/8 Sq Drive P Torque Wrench 3/8 Sq Drive P Torque Wrench ½ Sq Drive P Torque Wrench ½ Sq Drive P Torque Wrench ½ Sq Drive P Torque Wrench ½ Sq Drive P Torque Wrench ½ Sq Drive P Torque Wrench ½ Sq Drive P Part No Description Sizes Length Weight Insulated 6573 Reversible Ring Ratchet Wrench 0 x P 6577 Reversible Ring Ratchet Wrench 3 x P 6579 Reversible Ring Ratchet Wrench 7 x P 6572 Reversible Ring Ratchet Wrench 7 x P Reversible Ring Ratchet Wrench 9 x P Reversible Ring Ratchet Wrench 2 x P Reversible Ring Ratchet Wrench 24 x P Reversible Ring Ratchet Wrench 30 x P 9

12 Reversible Ratchet Lever Manufactured of alloyed and hardened steel Clockwise and anti-clockwise operation Socket locking mechanism - quick release Customised socket sets available Part No Description Length Height Weight Insulated 3338 Reversible Ratchet Lever 3/8 Sq Drive P 332 Socket 3/8 Square Drive for Hexagon Bolts All inserts are manufactured of alloyed and hardened steel Socket secured by expanding ball bearing Customised socket sets available Whitworth and AF sizes available Length - Standard 40mm / Long 75mm 332 Reversible Ratchet Lever /2 Sq Drive P Extension Bar Manufactured of alloyed steel Socket secured by expanding ball bearing Suitable for all types of socket Customised socket sets available 3232 Part No Description Length Weight Insulated Extension Bar 3/8 Sq Drive P 3232 Extension Bar 3/8 Sq Drive P Extension Bar 3/8 Sq Drive P 3332 Extension Bar /2 Sq Drive P Extension Bar /2 Sq Drive P Extension Bar /2 Sq Drive P T Bar Lever Manufactured of alloyed steel Socket secured by expanding ball bearing Suitable for all types of socket Customised socket sets available Part No Description T Bar Length Weight Insulated Length T Bar Lever 3/8 Sq Drive P T Bar Lever /2 Sq Drive P T Bar Lever /2 Sq Drive P 6 Point 2 Point Description Size Weight Insulated Part No Part No Socket 3/8 Sq Drive Standard 6 22 P Socket 3/8 Sq Drive Standard 7 23 P Socket 3/8 Sq Drive Standard 8 25 P Socket 3/8 Sq Drive Standard 9 28 P Socket 3/8 Sq Drive Standard 0 28 P Socket 3/8 Sq Drive Standard 28 P Socket 3/8 Sq Drive Standard 2 30 P Socket 3/8 Sq Drive Standard 3 33 P Socket 3/8 Sq Drive Standard 4 34 P Socket 3/8 Sq Drive Standard 5 38 P Socket 3/8 Sq Drive Standard 6 43 P Socket 3/8 Sq Drive Standard 7 48 P Socket 3/8 Sq Drive Standard 8 53 P Socket 3/8 Sq Drive Standard 9 56 P Socket 3/8 Sq Drive Standard P Socket 3/8 Sq Drive Standard 2 83 P Socket 3/8 Sq Drive Standard P Socket 3/8 Sq Drive Standard 24 2 P Socket 3/8 Sq Drive Long 8 50 P Socket 3/8 Sq Drive Long 9 55 P Socket 3/8 Sq Drive Long 0 63 P Socket 3/8 Sq Drive Long 67 P Socket 3/8 Sq Drive Long 2 70 P Socket 3/8 Sq Drive Long 3 77 P Socket 3/8 Sq Drive Long 4 85 P Socket 3/8 Sq Drive Long 5 00 P Socket 3/8 Sq Drive Long 6 3 P Socket Set /2" Other customised socket sets available 22 piece set Socket 3/8 Sq Drive Long 7 22 P Socket 3/8 Sq Drive Long 8 30 P Socket 3/8 Sq Drive Long 9 44 P Socket 3/8 Sq Drive Long P Socket 3/8 Sq Drive Long 2 60 P Socket 3/8 Sq Drive Long P Socket 3/8 Sq Drive Long P Insulated Socket 3/8 Sq Drive Long P Socket 3/8 Sq Drive Long P Socket Set /2 Sq Drive 6pt 8-24mm Sockets + Case 5200 P Socket 3/8 Sq Drive Long P 2

13 22 Socket /2 Square Drive for Hexagon Bolts All inserts are manufactured of alloyed and hardened steel Socket secured by expanding ball bearing Suitable for all types of socket Customised socket sets available Whitworth and AF sizes available Length - Standard 50mm / Long 90mm 6 Point 2 Point Description Size Weight Insulated Part No Part No Socket /2 Sq Drive Standard 8 53 P Socket /2 Sq Drive Standard 9 53 P Socket /2 Sq Drive Standard 0 55 P Socket /2 Sq Drive Standard 55 P Socket /2 Sq Drive Standard 2 57 P Socket /2 Sq Drive Standard 3 60 P Socket /2 Sq Drive Standard 4 65 P Socket /2 Sq Drive Standard 5 70 P Socket /2 Sq Drive Standard 6 74 P Socket /2 Sq Drive Standard 7 78 P Socket /2 Sq Drive Standard 8 82 P Socket /2 Sq Drive Standard 9 85 P Socket /2 Sq Drive Standard 20 6 P Socket /2 Sq Drive Standard 2 27 P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Standard P Socket /2 Sq Drive Long 8 02 P Socket /2 Sq Drive Long 9 05 P Socket /2 Sq Drive Long 0 8 P Socket /2 Sq Drive Long 20 P Socket /2 Sq Drive Long 2 23 P Socket /2 Sq Drive Long 3 27 P Socket /2 Sq Drive Long 4 34 P Socket /2 Sq Drive Long 5 40 P Socket /2 Sq Drive Long 6 50 P Socket /2 Sq Drive Long 7 70 P Socket /2 Sq Drive Long 8 88 P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long 2 26 P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Socket /2 Sq Drive Long P Allen Key Socket 3/8 & /2 Square Drive for Hexagon Socket Head Screws Hexagon sockets are made of alloyed and hardened steel Customised socket sets available Long version available on request Allen Key Socket for Hexagon Socket Head Screw 3/8 or /2 socket standard length 80mm Part No Description Size Weight Insulated Allen Key Socket 3/8 Sq Drive - Standard P Allen Key Socket 3/8 Sq Drive - Standard P Allen Key Socket 3/8 Sq Drive - Standard P Allen Key Socket 3/8 Sq Drive - Standard P 4030 Allen Key Socket 3/8 Sq Drive - Standard P 403 Allen Key Socket 3/8 Sq Drive - Standard.0 4 P 4032 Allen Key Socket 3/8 Sq Drive - Standard P 4033 Allen Key Socket 3/8 Sq Drive - Standard P 4034 Allen Key Socket 3/8 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P Allen Key Socket /2 Sq Drive - Standard P 4050 Allen Key Socket /2 Sq Drive - Standard P 4052 Allen Key Socket /2 Sq Drive - Standard P 4054 Allen Key Socket /2 Sq Drive - Standard P 4057 Allen Key Socket /2 Sq Drive - Standard P 4059 Allen Key Socket /2 Sq Drive - Standard P Miniature BA, Open Ended Spanners Part No Size Length Weight Insulated BA P BA 85 7 P BA 80 9 P BA 80 7 P 23

14 Open Ended Spanners Metric/Whitworth/A/F Open Ended Spanners A/F Made of chrome vanadium steel Long length spanners available on request Torque tested according to DIN899 Spanner sets available on request 5320 Part No Description Length Size Weight Insulated 5306 Open Ended Spanner - Metric P 5307 Open Ended Spanner - Metric P 5308 Open Ended Spanner - Metric P 5309 Open Ended Spanner - Metric P 530 Open Ended Spanner - Metric P 53 Open Ended Spanner - Metric 5 33 P 532 Open Ended Spanner - Metric P 533 Open Ended Spanner - Metric P 534 Open Ended Spanner - Metric P Part No Description Length Size Weight Insulated [ ] 5204 Open Ended Spanner A/F 90 /4 A/F 25 P 5256 Open Ended Spanner A/F 00 5/6 A/F 35 P Open Ended Spanner A/F 20 3/8 A/F 40 P 5276 Open Ended Spanner A/F 35 7/6 A/F 50 P 5202 Open Ended Spanner A/F 40 /2 A/F 55 P 5296 Open Ended Spanner A/F 50 9/6 A/F 65 P Open Ended Spanner A/F 55 5/8 A/F 70 P 526 Open Ended Spanner A/F 75 /6 A/F 0 P Open Ended Spanner A/F 20 3/4 A/F 60 P Open Ended Spanner A/F 240 7/8 A/F 250 P 5200 Open Ended Spanner A/F 260 A/F 325 P Open Ended Spanner A/F 320 5/6 A/F 500 P General Purpose Open Ended Spanners (Handles only insulated) 535 Open Ended Spanner - Metric P 536 Open Ended Spanner - Metric P 537 Open Ended Spanner - Metric P 538 Open Ended Spanner - Metric P 539 Open Ended Spanner - Metric P 5320 Open Ended Spanner - Metric P 532 Open Ended Spanner - Metric P 5322 Open Ended Spanner - Metric P Open Ended Spanner - Metric P 5327 Open Ended Spanner - Metric P 5330 Open Ended Spanner - Metric P Part No Size Weight Insulated Part No Size Weight Insulated [ ] Part No Size Weight Insulated BSW 5332 Open Ended Spanner - Metric P P /8 A/F 69 P /6 whit 48 P 5334 Open Ended Spanner - Metric P P /6 A/F 72 P 5634 /4 Whit 70 P 5336 Open Ended Spanner - Metric P P 5402 /2 A/F 76 P /6 Whit 85 P P /6 A/F 78 P /8 Whit 25 P Open Ended Spanners Whitworth P P P /8 A/F 00 P 546 /6 A/F 8 P /4 A/F 30 P /6 Whit 90 P 5602 /2 Whit 235 P /6 Whit 270 P Part No Description Length Size Weight Insulated [ ] P P /6 A/F 75 P /8 A/F 95 P /8 Whit 300 P 566 /6 Whit 320 P 5008 Open Ended Spanner - Whitworth 20 /8 W 34 P P 5400 A/F 240 P /4 Whit 392 P 5036 Open Ended Spanner - Whitworth 30 3/6 W 44 P P 548 /8 A/F 300 P /8 Whit 520 P 5004 Open Ended Spanner - Whitworth 40 /4 W 54 P P 544 /4 A/F 330 P 5056 Open Ended Spanner - Whitworth 45 5/6 W 70 P P /6 A/F 360 P Open Ended Spanner - Whitworth 70 3/8 W 00 P P /6 A/F 395 P 5076 Open Ended Spanner - Whitworth 200 7/6 W 60 P P 542 /2 A/F 420 P 5002 Open Ended Spanner - Whitworth 240 /2 W 242 P P 5096 Open Ended Spanner - Whitworth 260 9/6 W 322 P P Open Ended Spanner - Whitworth 275 5/8 W 343 P P 506 Open Ended Spanner - Whitworth 305 /6 W 500 P P Open Ended Spanner - Whitworth 30 3/4 W 500 P Open Ended Spanner - Whitworth 320 7/8 W 600 P Open Ended Spanner - Whitworth 400 W 700 P 25

15 Ring Spanners Metric/Whitworth/A/F Made of chrome vanadium steel Conforms to ISO 004, DIN 838 and UNE 6522 Larger sizes available on request Part No Description Length Size Weight Insulated 6306 Ring Spanner - Metric P 6307 Ring Spanner - Metric P 6308 Ring Spanner - Metric P 6309 Ring Spanner - Metric P 630 Ring Spanner - Metric P 63 Ring Spanner - Metric P 632 Ring Spanner - Metric P 633 Ring Spanner - Metric P 634 Ring Spanner - Metric P 635 Ring Spanner - Metric P 636 Ring Spanner - Metric P 637 Ring Spanner - Metric P 638 Ring Spanner - Metric P 639 Ring Spanner - Metric P 6320 Ring Spanner - Metric P 632 Ring Spanner - Metric P 6322 Ring Spanner - Metric P 6324 Ring Spanner - Metric P 6327 Ring Spanner - Metric P 6330 Ring Spanner - Metric P 6332 Ring Spanner - Metric P 6334 Ring Spanner - Metric P 6336 Ring Spanner - Metric P Ring Spanners Whitworth Part No Description Length Size Weight Insulated [ ] 6008 Ring Spanner Whitworth 55 /8 68 P 6036 Ring Spanner Whitworth 85 3/6 06 P 6004 Ring Spanner Whitworth 95 /4 35 P 6056 Ring Spanner Whitworth 205 5/6 75 P Ring Spanner Whitworth 25 3/8 227 P 6076 Ring Spanner Whitworth 245 7/6 305 P 6002 Ring Spanner Whitworth 270 /2 422 P 6096 Ring Spanner Whitworth 285 9/6 455 P Ring Spanner Whitworth 295 5/8 540 P 606 Ring Spanner Whitworth 305 /6 565 P Ring Spanner Whitworth 320 3/4 650 P Ring Spanner Whitworth 360 7/8 00 P 6000 Ring Spanner Whitworth P 633 Ring Spanners A/F Part No Description Length Size Weight Insulated [ ] 6204 Ring Spanner A/F 40 /4 4 P 6256 Ring Spanner A/F 50 5/6 62 P Ring Spanner A/F 65 3/8 84 P 6276 Ring Spanner A/F 75 7/6 90 P 6202 Ring Spanner A/F 85 /2 3 P 6296 Ring Spanner A/F 95 9/6 35 P Ring Spanner A/F 205 5/8 75 P 626 Ring Spanner A/F 25 /6 227 P Ring Spanner A/F 220 3/4 296 P Ring Spanner A/F 245 7/8 308 P 6200 Ring Spanner A/F P Gear Wrench Spanners Metric Needs as little as 5 of sweep to move a fastener Surface drive box end virtually eliminates the rounding of fasteners Fully hardened 653 Part No Description Length Size Weight Insulated 6555 Gear Wrench Spanner P 6506 Gear Wrench Spanner P 6507 Gear Wrench Spanner P 6508 Gear Wrench Spanner P 6509 Gear Wrench Spanner P 650 Gear Wrench Spanner P 65 Gear Wrench Spanner P 652 Gear Wrench Spanner P 653 Gear Wrench Spanner P 654 Gear Wrench Spanner P 655 Gear Wrench Spanner P 656 Gear Wrench Spanner P 657 Gear Wrench Spanner P 658 Gear Wrench Spanner P 659 Gear Wrench Spanner P 652 Gear Wrench Spanner P 6522 Gear Wrench Spanner P 6524 Gear Wrench Spanner P 6525 Gear Wrench Spanner P 6527 Gear Wrench Spanner P 6530 Gear Wrench Spanner P 6532 Gear Wrench Spanner P 6534 Gear Wrench Spanner P 26 27

16 Fully Insulated Adjustable Spanners Adjustable Spanners with Handstop Made of chrome vanadium steel Made of chrome vanadium steel Measurement scale on jaws to size nuts and pipes Insulated head and non conductive adjustment button 9250 Cross section of the knurl is tapered to give a smoother and more precise action 92200H Part No Description Max Jaw Length Metric Hexagon Weight Insulated Opening Nut Size 9200 Fully Insulated Adjustable Spanner 29 8 / 200mm M - M8 320 P 9250 Fully Insulated Adjustable Spanner 33 0 / 250mm M - M P 9300 Fully Insulated Adjustable Spanner 38 2 / 300mm M - M P Adjustable Spanners Made of chrome vanadium steel Measurement scale on jaws to size nuts and pipes Cross section of the knurl is tapered to give a smoother and more precise action Part No Description Max Jaw Length Metric Hexagon Weight Insulated Opening Nut Size 9200 Adjustable Spanner 7 4 / 00mm M - M0 70 P 9250 Adjustable Spanner 24 6 / 50mm M - M6 67 P Adjustable Spanner 29 8 / 200mm M - M8 307 P Adjustable Spanner 33 0 / 250mm M - M22 52 P Adjustable Spanner 38 2 / 300mm M - M24 88 P Adjustable Spanner 50 5 / 375mm M - M P Adjustable Spanner 60 8 / 450mm M - M P Adjustable Spanners Bahco Made of alloyed and hardened steel Exceeds ISO specifications Withstands high torque loads Clear measurement scale Part No Description Opening Length Weight Insulated 5904 Adjustable Spanner - Bahco / 00mm 40 P 5906 Adjustable Spanner - Bahco / 50mm 62 P 5908 Adjustable Spanner - Bahco / 200mm 260 P 590 Adjustable Spanner - Bahco / 250mm 50 P 592 Adjustable Spanner - Bahco / 300mm 870 P 595 Adjustable Spanner - Bahco / 375mm 430 P 598 Adjustable Spanner - Bahco / 450mm 900 P Part No Description Max Jaw Length Metric Hexagon Weight Insulated Opening Nut Size 9200H Adjustable Spanner with handstop 7 4 / 00mm M - M0 50 P 9250H Adjustable Spanner with handstop 24 6 / 50mm M - M6 80 P 92200H Adjustable Spanner with handstop 29 8 / 200mm M - M8 305 P 92250H Adjustable Spanner with handstop 33 0 / 250mm M - M P 92300H Adjustable Spanner with handstop 38 2 / 300mm M - M P 92375H Adjustable Spanner with handstop 50 5 / 375mm M - M P 92450H Adjustable Spanner with handstop 60 8 / 450mm M - M P Hammer Head Adjustable Made of chrome vanadium steel Measurement scale on jaws to size nuts and pipes Cross section of the knurl is tapered to give a smoother and more precise action With hammer head feature Dual purpose tool Part No Description Opening Length Weight Insulated Adjustable Spanner / 300mm 875 P Hammer Replaceable Inserts Inserts manufactured from nylon Part No Description Length Handle Insert Weight Insulated ø Light Hammer P Light Hammer P 4033 Hammer Insert 25mm x 4034 Hammer Insert 35mm x 28 29

17 Slotted Screwdrivers High torque softgrip screwdrivers for slotted screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Tips and dimensions acc. to DIN 7437, ISO 2380, DIN Phillips Screwdrivers High torque softgrip screwdrivers for Phillips screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Tips and dimensions acc. to DIN 7438, ISO 8764-PH 3302 Part No Description Tip length Tip Width Blade Length Weight Insulated 325 Screwdriver Slotted P 328 Screwdriver Slotted P 33 Screwdriver Slotted P 335 Screwdriver Slotted P 340 Screwdriver Slotted P 344 Screwdriver Slotted P 345 Screwdriver Slotted P 399 Screwdriver Slotted P 398 Screwdriver Slotted P 355 Screwdriver Slotted P 354 Screwdriver Slotted P 390 Screwdriver Slotted P 365 Screwdriver Slotted P 380 Screwdriver Slotted P 30 Screwdriver Slotted P Part No Description Point Blade Overall Weight Insulated Size Length Length 3300 Screwdriver PH PH P 330 Screwdriver PH PH P 3302 Screwdriver PH PH P 3303 Screwdriver PH PH P 3304 Screwdriver PH PH P Pozidrive Screwdrivers High torque softgrip screwdrivers for Pozidrive screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Tips and dimensions acc. to DIN 7438, ISO 8764-PZ 4303 Screwdriver (for serial terminal connectors) High torque softgrip screwdrivers for terminal screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle 230 Part No Description Point Blade Overall Weight Insulated Size Length Length 4300 Screwdriver PZ PZ P 430 Screwdriver PZ PZ P 40 Screwdriver PZ PZ P 420 Screwdriver PZ PZ P 4302 Screwdriver PZ PZ P 402 Screwdriver PZ PZ P 4202 Screwdriver PZ PZ P 4303 Screwdriver PZ PZ P 4304 Screwdriver PZ PZ P Part No Description Point Size Blade Overall Weight Insulated Length Length 230 Screwdriver Flat/Poz 0.6 x P 2302 Screwdriver Flat/Poz 0.9 x P 30 3

18 TORX Screwdrivers Screwdriver Set High torque softgrip screwdrivers for TORX screws High torque softgrip screwdrivers Precision hardened Chrome-Vanadium-Molybdenum steel blade Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle 0905 Ergonomic, softgrip multi-component handle Part No Description TORX Blade Overall Weight Insulated Length Length 0905 Screwdriver - TORX T P 0906 Screwdriver - TORX T P 0907 Screwdriver - TORX T P 0908 Screwdriver - TORX T P 0909 Screwdriver - TORX T P 090 Screwdriver - TORX T P 095 Screwdriver - TORX T P 0920 Screwdriver - TORX T P 0925 Screwdriver - TORX T P 0927 Screwdriver - TORX T P 0930 Screwdriver - TORX T P 0940 Screwdriver - TORX T P 0945 Screwdriver - TORX T P Part No Description Contents A B C D E 0700 Screwdriver Set Screwdriver Set Roberston Square Screwdrives High torque softgrip screwdrivers for square head screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle 0802 Nut Spinner High torque softgrip screwdrivers for hexagon headed nuts, bolts and screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Part No Description Size Blade Overall Weight Insulated Length Length 080 Roberston Square Screwdriver # P 0802 Roberston Square Screwdriver # P 0803 Roberston Square Screwdriver # P Allen Key Screwdrivers High torque softgrip screwdrivers for for hexagon screws Precision hardened Chrome-Vanadium-Molybdenum steel blade 5353 Part No Description Point Size Blade Overall Weight Insulated Length Length Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Nut Spinner P Nut Spinner P Nut Spinner P Nut Spinner P Nut Spinner P Nut Spinner P Nut Spinner P 3650 Nut Spinner P 365 Nut Spinner P 3652 Nut Spinner P 3653 Nut Spinner P 3654 Nut Spinner P Part No Description Point Blade Overall Weight Insulated Size Length Length 5303 Screwdriver Hexagon P 5353 Screwdriver Hexagon P 5304 Screwdriver Hexagon P 5354 Screwdriver Hexagon P 5305 Screwdriver Hexagon P 5355 Screwdriver Hexagon P 5306 Screwdriver Hexagon P 5356 Screwdriver Hexagon P 33

19 Allen Keys T Bar P Handle Allen Keys For use with hex screw heads in cable connectors and cut-outs 7203 High torque softgrip screwdrivers for for hexagon socket screws T Handle offers max torque 7207 Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle 705 Part No Description Size Length Weight Insulated 7202 T Bar Allen Key P 7203 T Bar Allen Key P 7204 T Bar Allen Key P 7205 T Bar Allen Key P 7206 T Bar Allen Key P 7208 T Bar Allen Key P 720 T Bar Allen Key P 7223 T Bar Allen Key P 7355 T Bar Allen Key P 836 T Bar Allen Key 3/ P 8532 T Bar Allen Key 5/ P Allen Keys Angled For hex socket screws Metal parts of CV steel with rust proof surface, nickel plated 6305 Part No Description Size Length Weight Insulated 6325 Angled Allen Key P 6303 Angled Allen Key P 6304 Angled Allen Key P 6305 Angled Allen Key P 6306 Angled Allen Key P 6308 Angled Allen Key P 630 Angled Allen Key P 632 Angled Allen Key P Part No Description Point Blade Overall Weight Insulated Size Length Length 702 P Handle Allen Key P 703 P Handle Allen Key P 704 P Handle Allen Key P 705 P Handle Allen Key P 706 P Handle Allen Key P P Handle Allen Keys Set High torque softgrip screwdrivers for hexagon socket screws Precision hardened Chrome-Vanadium-Molybdenum steel blade Blade insulation directly moulded onto the blade Ergonomic, softgrip multi-component handle Part No Description Contents A B C D E 700 P Handle Allen Key Set P Handle Allen Key Set Cooker Knob Allen Keys For use with hex screw heads in cable connectors and cut outs Part No Description Size Length Weight Insulated 7233 Cooker Knob Allen Key P 35

20 Connector Holding Tools Connector Holding Tools Adjustable Designed for use with straight or round connectors For use with SSIPC insulation piercing connector Other sizes available on request CHT-SSIPC For live mechanical cable jointing PVC insulation provides secure gripping of connector Other sizes available on request Nylon insert on handle prevents damage to connector Part No Description Opening Length Weight Insulated CHT-SSIPC Connector Holding Tool SSIPC 37.7 x P CHT-UST CHT-UST/T Connector Holding Tools For use with MSIP insulation piercing connector Other sizes available on request CHT-MSIP Part No Description Opening Length Weight Insulated CHT-UST 2 pt CH Tool Standard P CHT-UST/T 2 pt CH Tool Standard - T Handle P CHT-UST 2 pt CH Tool Small P CHT-UST/T 2 pt CH Tool Small - T Handle P Connector Holding Tools Fixed Part No Description Opening Length Weight Insulated CHT-MSIP Connector Holding Tool MSIP 59.5 x P For use with branch connectors Other sizes available on request CHT-UBR85 Connector Holding Tools Double-ended Spanner for use with old and new style BCNE connectors Insulated shroud/cover for BCNE connector, also available [See Page 4] Other sizes available on request Part No Description Opening Length Weight Insulated CHT-UBR95 Connector Holding Tool P CHTUBR95/2A Connector Holding Tool P CHT-UBR85 Connector Holding Tool P CHT-UBR300 Connector Holding Tool P Part No Description Opening Length Weight Insulated Gland Spanner For tightening Aluminium Cable Glands Manufactured from Plastic to prevent damage to the Cable Gland Connector Holding Tool BCNE 6.5 x x P Connector Holding Tool TA 39.5 x x P Part No Description Opening Length Weight Insulated Gland Spanner 57/47mm AF P Gland Spanner 66/57mm AF P Gland Spanner 7 /6mm AF P 37

21 Link Extractors Screwdriver Type Male Thread For removal of cable links in underground cable link boxes Screwdriver type for restricted areas Part No Thread Form Thread Blade Handle Overall Weight Insulated Length Size Size Length /6 Whit x P /4 Whit x P /6 Whit x P /8 Whit x P M x P /6 Sq End x P /6 Sq Acme x P form thread 3/8 O/D Link Extractors T Bar Type Female Thread For removal of cable links in underground link boxes Screwdriver type for restricted areas T Handle is ideal for applications where maximum torque is needed Part No Thread Form Thread T Bar Length Overall Weight Insulated Length Length /4 Whit P /8 Whit P /2 Whit P /2 BSF P /2 Whit L Hand P Link Extractors Screwdriver Type Female Thread For removal of cable links in underground cable link boxes Screwdriver type for restricted areas 0240 Box Spanners T Bar Made of cold drawn seamless precision steel tube Other shaft lengths and sizes available on request Part No Thread Form Thread Blade Size Handle Size Overall Weight Insulated Length Length 0240 /4 Whit x P /6 Whit x P /8 Whit x P /2 Whit x P M x P /2 Whit L Hand x P /4 BSF x P /6 BSF x P /8 BSF x P /2 BSF x P Link Extractors T Bar Type Male Thread For removal of cable links in underground cable link boxes Screwdriver type for restricted areas T Handle is ideal for applications where maximum torque is needed Part No Thread Form Thread Length T Bar Length Overall Length Weight Insulated x 8mm P (Ø 3mm x 5mm long pin) 0250 /4 Whit P /8 Whit P /2 Whit P M P Part No Description Size T Bar Length Overall Weight Insulated (screw retaining) Length Box Spanner T Bar 0BA P Box Spanner T Bar 2BA P Box Spanner T Bar 3BA P Box Spanner T Bar 3/6 Whit P 0280 Box Spanner T Bar /4 Whit P Box Spanner T Bar 5/8 A/F P Box Spanner T Bar /6 A/F P Box Spanner T Bar 3/8 A/F P Box Spanner T Bar 8mm P 3740 Box Spanner T Bar 0mm P 374 Box Spanner T Bar mm P 3742 Box Spanner T Bar 2mm P 3743 Box Spanner T Bar 3mm P 3744 Box Spanner T Bar 4mm P 3746 Box Spanner T Bar 6mm P 3747 Box Spanner T Bar 7mm P 3748 Box Spanner T Bar 8mm P 3749 Box Spanner T Bar 9mm P Box Spanner T Bar 20mm P Box Spanner T Bar 22mm P Box Spanner T Bar 24mm P Box Spanner T Bar 27mm P Box Spanner T Bar 30mm P 39

22 Push on Shrouds LV Link Shrouds For uninsulated electric cable ends of all common cross sections and materials For LV underground cable links With Gripping Collar Two designs 646xxx ( 2part moulded) 648xxx (dip coated) Flexible gripping collar, prevents damage to paper insulated cable No deformation of copper wires when applied Holds securely in place Can also be used on cable lugs Conical / Straight Type 647xxx 645xxx Provides insulating barrier Prevents accidental contact with LV links Part No Description Internal Internal Internal Weight Insulated Length Width Height 9500 LV Link Shrouds P LV Link Shrouds P LV Link Shrouds P Made of strong, resilient insulation material 646xxx Safely fastened even with irregular cross sections Available with imprint L, L2, L3 Dimensions not listed here can be supplied in small quantities price on application 647xxx 646xxx & 648xxx LV Link Shrouds P Box Shrouds Used to shroud live blade contacts in cut outs Foam insert to provide secure grip on blade xxx Part No Description Size height Weight Insulated Part No Description Length Opening Weight Insulated ø Push On Shroud - conical P Push On Shroud - conical P Push On Shroud - conical P Shroud Box Type with Foam 50 x P 9400 Shroud Box Type Tube & Foam 50 x P Shroud Box Type with Foam 60 x P Shroud Box Type with Foam 0 x P Shroud Box Type with Foam 20 x P Push On Shroud - conical P Push On Shroud - conical P Push On Shroud - conical P Push On Shroud - conical P Shroud - CNE Insulated shroud/cover for CNE connector Push On Shroud - conical P Push On Shroud - conical P Push On Shroud - conical P Push On Shroud - conical P *Connector not included Push On Shroud - conical P Push On Shroud - conical P Part No Description Size Weight Insulated Push On Shroud - conical P Shroud - CNE 20x35x70mm 6 P Push On Shroud - conical P Core End Shroud - gripping collar P Core End Shroud - gripping collar P Core End Shroud - gripping collar P Core End Shroud - gripping collar P Push On Shroud - straight P Wedge - Hybrid Neutral For safe cutting of neutral cable Prevents damage to other cores Push On Shroud - straight P Push On Shroud - straight P Push On Shroud - gripping collar P Push On Shroud - gripping collar P Push On Shroud - gripping collar P Push On Shroud - gripping collar P Part No Description Length Weight Insulated Push On Shroud - gripping collar P Wedge - Hybrid Neutral P 4

23 Shroud - Universal Wedges For Domestic Cut-Outs Wooden Wedge with Groove Manufactured from hardwood Part No Description Shield Area Weight Insulated Shroud - Universal 32 x 32 0 P Shroud - Non-Universal For Domestic Cut-Outs 0308 Aid for cutting conductors, non slip Wooden Wedge without Groove Manufactured from hardwood Plastic Wedge, red, without Groove Manufactured from polyamide, reinforced Lightweight Part No Description Shield Area Weight Insulated Plastic Wedge, grey, without Groove 0308 Shroud - Universal 30 x 25 0 P Manufactured from high strength plastic Brushes Angled or Straight With replaceable head (except straight brush) Handle tested to EN/IEC 60900:2004 For cleaning and maintenance Plastic brush available with fixed angled head Case for Brushes Very tough Plastic Wedge, grey, with Groove Manufactured from high strength plastic Aid for cutting conductors, non slip Grey or red Wedge, Heavy Duty Made of red plastic with press stud Suitable for insulated brushes of up to 400mm Manufactured from high strength plastic Suitable for use with large size cable cutter Part No Description Length Weight Insulated Plastic Wedge, red Manufactured from polyamide - hard Brush angled P Aid for cutting conductors, non slip Brush /2 angled P Especially for fitting of branch terminals Brush 2 angled 40 5 P Brush straight P Flanged Chisel Brush /2 straight P Brush 2 straight P Brush plastic P Brush /2 plastic P For NKBA cable 50 x 25mm Red Non brittle plastic Brush 2 plastic P Part No Description Length Width High Weight Insulated Insulated 5524 Brush Head angled 0 P Brush Head /2 angled 20 P Brush Head 2 angled 25 P Brush Head /2 straight 5 P Brush 2 straight 20 P Brush Handle 80 P Brush Handle /2 70 P Wooden Wedge with Groove to 0 54 x Wooden Wedge without Groove to 0 45 x Plastic Wedge, red, without Groove to 0 43 P Plastic Wedge, grey, without Groove to 0 93 P Plastic Wedge, red, with Groove to 0 90 P Plastic Wedge, grey, with Groove to 0 40 P Plastic Wedge, red to 0 00 P Flanged Chisel ø - 63 P Brush Handle 2 20 P Brush Case (440mm x 70mm) 50 x 43

24 Core Alignment Tools Used to manipulate bare or insulated cable cores Aligns the cores prior to jointing Produced in nylon 0-300IC 3 Core Part No Description Cores Core Size Range Weight Insulated 0-95C Cable Core Twisters 3 70mm 2 Bare x 95 mm 2 Bare 54 P 0-X0C Cable Core Twisters 3 95mm 2 Bare x 95 mm 2 Ins 63 P 0-20C Cable Core Twisters 3 70mm 2 Bare x 20 mm 2 Bare 63 P 0-20IC Cable Core Twisters 3 70mm 2 Ins x 20mm 2 Ins 50 P 0-X06C Cable Core Twisters 3 20mm 2 Bare x 20mm 2 Ins 48 P 0-X07C Cable Core Twisters 3 85mm 2 Bare x 85mm 2 Ins 83 P 0-240C Cable Core Twisters 3 85mm 2 Bare x 240mm 2 Bare 46 P 0-300C Cable Core Twisters 3 85mm 2 Bare x 300mm 2 Bare 80 P 0-300IC Cable Core Twisters 3 85mm 2 Ins x 300mm 2 Ins 67 P 0-X08C Cable Core Twisters 3 300mm 2 Bare x 300mm 2 Ins 70 P 0-X09C Cable Core Twisters 3 70mm 2 Bare x 70mm 2 Ins 53 P 0-X0C Cable Core Twisters 3 95mm 2 Bare x 85mm 2 Bare 9 P 0-XC Cable Core Twisters 3 95mm 2 Ins x 85mm 2 Ins 79 P 4 Core Part No Description Cores Core Size Range Weight Insulated 0-4C Cable Core Twisters 4 95mm 2 Bare x 95mm 2 Ins 62 P 0-42C Cable Core Twisters 4 85mm 2 Ins x 240mm 2 Ins 70 P 0-43C Cable Core Twisters 4 85mm 2 Bare x 240mm 2 Bare 83 P 0-44C Cable Core Twisters 4 85mm 2 Ins x 300mm 2 Ins 72 P 0-X02C Cable Core Twisters 4 85mm 2 Bare x 300mm 2 Bare 78 P 0-X4C Cable Core Twisters 4 95mm 2 Bare x 85mm 2 Bare 88 P 0-X5C Cable Core Twisters 4 95mm 2 Ins x 85mm 2 Ins 84 P 3 & 4 Core Part No Description Cores Core Size Range Weight Insulated 0-X03C Cable Core Twisters 3 & 4 3C 95mm 2 Ins x 4C 95mm 2 Ins 6 P 0-X04C Cable Core Twisters 3 & 4 3C 85mm 2 Ins x 4C 85mm 2 Ins 75 P 0-X05C Cable Core Twisters 3 & 4 3C 300mm 2 Ins x 4C 240mm 2 Ins 67 P 0-X2C Cable Core Twisters 3 & 4 3C 300mm 2 Bare x 4C 300mm 2 Bare 70 P 0-X3C Cable Core Twisters 3 & 4 3C 300mm 2 Ins x 4C 300mm 2 Ins 64 P Core Alignment Sockets with Square End of 3/8 or /2 Core Bending Bars For use on sectoral cores For bare and insulated cores Other Core sizes available Part No Description Cores Core Size Range Weight Insulated [mm 2 ] Core Bending Bar 3 70 Bare 235 P Core Bending Bar 3 70 Insulated 276 P Core Bending Bar 3 95 Bare 29 P Core Bending Bar 3 95 Insulated 235 P Core Bending Bar 3 20 Bare 200 P Core Bending Bar 3 20 Insulated 225 P Core Bending Bar 3 85 Bare 235 P Core Bending Bar 3 85 Insulated 235 P Core Bending Bar Bare 232 P Core Bending Bar Insulated 244 P Core Bending Bar Bare 235 P Core Bending Bar Insulated 235 P Knockout Tool Steel shaft and handle Other sizes available on request 030 Part No Overall Length handle Size Weight Insulated x 32 9 P Insulation of non-brittle plastic Used with the ratchet lever part no or 332 Other sizes on request Part No Description Length Cross Section Weight Insulated 3/8 /2 [mm 2 ] Core Alignment Socket P Core Alignment Socket P Core Alignment Socket P 45

25 Special Wedge Manufactured from Polyamide Suitable for use with a large size cable cutter Aid for cutting conductors, non slip Especially for fitting of branch terminals Part No Description Length Width High Weight Insulated Wedge with Groove & Nut to P Wedge with Groove & Hook to 3 25 P Core Separators / Wedges Designed to aid the separation of cores during jointing Smooth surface of material ensures minimal damage to the core insulation Thumb and finger grip assists insertion and removal Design reduces the risk of displacement whilst located between the cable cores JTN/ JTN/2 Part No Description Length Weight Insulated JTN- Mini Hepwedge Ins Core Separator P JTN-2 Hepwedge Ins Core Separator P Wedges Cable Core Wedge Manufactured from Nylon Without groove 0-NYC Part No Description Length Width Nominal Weight Insulated Lift Core Separator Suitable for three core cables where a conventional wedge cannot be used for solid aluminium or larger stranded core cables and for cables which have become over-tensioned after laying TBS JTN/3 0-NYC Cable Core Wedge P 0-2NYC Cable Core Wedge P 0-3NYC Cable Core Wedge P 0-4NYC Cable Core Wedge P Part No Description Length Weight Insulated JTN-3 Maxi Hepwedge Core Separator P High Lift Cable Core Guard Used to provide separation between a cable core which is being cut and neighbouring cores Manufactured from nylon 20-CG Insulated File Designed to remove the oxide layer from aluminium conductors prior to jointing Multi-coated insulation Other sizes available on request 0800 Part No Description Nominal Lift Weight Insulated 20-CG High Lift Cable Core Guard 23mm 57 P Part No Description Length Exposed Weight Insulated File Length 0800 Insulated File 90 35mm 85 P Wedges ABC For use with aerial bundled cables (ABC) Supplied as set of two Includes m nylon connecting string 0300 File Card Brush For cleaning wood and metal files Removes embedded filings far more effectively than an ordinary wire brush The fine scratch wires are webbing mounted and stapled to the wooden stock 0800 Part No Description Nominal Lift Weight Insulated 0300 Wedge ABC set of two P Part No Description Size Weight Insulated File Card Brush 25 x x 46 47

26 Tape Measure Non-Conductive Tape material non stretchable FRP Case material ABS resin Proof tested to 20kV 9mm wide GC-30N Part No Description Size Weight Insulated GC-30N Tape Measure Non Conductive 3m 83 x 73 x P Diameter Tape 2 metre length 6mm wide Black etched steel blade Grey plastic case Folding Rule Plastic Manufactured from glass fibre reinforced polyamide Scratch weather and chemical resistant Patented, wear resistant and maintenance free joints 90 lock-in position Open Closed Part No Description Size Weight Insulated Tape Measure 2m 45mm x 45mm 20 x Insulated Folding Rule Plastic m 90 x Folding Rule Plastic 2m 30 x Tool Kits / Sets Jointer s Tool Kit [kg] 240/KIT Jointer s Tool Kit 0 Contents *Tool Box - Professional 26 Allen Key Screwdriver 3mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper - 250mm Cable Jointer s Coring Knife *Cable Knife - Heavy Duty *Cable Knife Curved Blade *Engineer s File 0 /2 Round 2nd Cut *Engineer s File 8 Round 2nd cut Engineer s Pliers 200mm Extension Bar /2 Sq Drive 25mm Hack Knife - Plastic 245mm Jointer s Tool Kit 2 Hacksaw 300mm Blade *Hepwedge Core Sep.60mm Junior Hacksaw 50mm Blade *Maxi Hepwedge Core Sep.262mm *Mini Hepwedge Core Sep.30mm Open Ended Spanner 3mm Open Ended Spanner 7mm Open Ended Spanner 9mm Open Ended Spanner 7/6 W *Ratchet - Reversible /2 Sq Drive *Rule - Plastic Measuring 2m Long Safety Clamp Short 45mm jaw Saw - Depth Gauge 20mm blade 24tpi Screwdriver.0 x 5.5 x 50mm Screwdriver.6 x 0.0 x 200mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 9mm *Tin Snips - 0 /250mm Water Pump Plier 240mm Wedge - Hybrid Neutral * Non insulated [kg] 240/KIT2 Jointer s Tool Kit Dummy Fuse Link Manufactured from non conductive orange plastic Prevents current flow between cut out blades Allows cut out lid to be fitted securely in place DFL7MM DFL7MM/MK2 Contents *Tool Box - Professional 26 Allen Key Driver 3mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper - 250mm Cable Jointer s Coring Knife Hacksaw 300mm Blade *Hepwedge Core Sep.60mm *Maxi Hepwedge Core Sep.262mm *Mini Hepwedge Core Sep.30mm Open Ended Spanner 7mm Screwdriver.6 x 0.0 x 200mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Insulated DFL7MM Dummy Fuse Link MC300 Cut Out 20 P DFL7MM/MK2 Dummy Fuse Link MC600 Cut Out 25 P *Cable Knife - Heavy Duty *Cable Knife Curved Blade *Engineer s File 0 /2 Round 2nd Cut *Engineer s File 8 Round 2nd cut Engineer s Pliers 200mm Hack Knife - Plastic 245mm Open Ended Spanner 7/6 W *Ratchet - Reversible /2 Sq Drive *Rule - Plastic Measuring 2m Long Safety Clamp Short 45mm jaw Saw - Depth Gauge 20mm blade 24tpi Screwdriver.0 x 5.5 x 50mm Socket 6pt /2 Drive 8mm Socket 6pt /2 Drive 9mm *Tin Snips - 0 /250mm Water Pump Plier 240mm Wedge - Hybrid Neutral * Non insulated 48 49

27 Tool Kits / Sets Cont. Tool Kits / Sets Cont. Jointer s Tool Kit 3 [kg] 240/KIT3 Jointer s Tool Kit Jointer s Mate Tool Kit [kg] 240/JMTKIT Jointer s Mate Tool Kit 8 Contents *Tool Box - Professional 26 Allen Key Driver 3mm Box Spanner T Bar 3mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper 250mm Cable Jointer s Coring Knife *Cable Knife - Heavy Duty *Cable Knife Curved Blade *Continuity Bond 2 way *Engineer s File 0 /2 Round 2nd Cut *Engineer s File 8 Round 2nd cut Engineer s Pliers 200mm Extension Bar /2 Sq Drive 25mm Groove Joint Pliers 300mm Hack Knife Plastic 245mm Hacksaw 300mm Blade *Hepwedge Core Sep.60mm Junior Hacksaw 50mm Blade *Maxi Hepwedge Core Sep.262mm *Mini Hepwedge Core Sep.30mm Open Ended Spanner 3mm Open Ended Spanner 7mm Open Ended Spanner 9mm Open Ended Spanner 7/6 W Ratchet - Reversible /2 Sq Drive *Rule - Plastic Measuring 2m Long Safety Clamp Short 45mm jaw Saw - Depth Gauge 20mm blade 24tpi Screwdriver.0 x 5.5 x 50mm Screwdriver.6 x 0.0 x 200mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 8mm Socket 6pt /2 Drive 9mm *Tin Snips - 0 /250mm Wedge - Hybrid Neutral * Non insulated Contents *Tool Box - Professional 26 *ABS Folding Rule mtr/39 *Cabinet Rasp Half Round 0 *Cable Core Wedge 225 x 25 x 38mm Cable Cropper 250mm *Cable Knife - Heavy Duty *Cable Knife Curved Blade Hacksaw 300mm Blade *Hammer - Ball Pein 6oz / 454g *Hepwedge Core Sep.60mm Junior Hacksaw 50mm Blade *Mini Hepwedge Core Sep.30mm Saw - Depth Gauge 20mm blade 24tpi Jointer s General Tool Kit Screwdriver.0 x 5.5 x 50mm Screwdriver.6 x 0.0 x 200mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm *Tin Snips - 0 /250mm Water Pump Plier 240mm * Non insulated kg 92500/KIT Jointer s General Tool Kit 8 Contents 50 Jointer s Tool Kit 4 [kg] 240/KIT4 Jointer s Tool Kit 4 2 Contents *Tool Box - Professional 26 Allen Key Driver 3mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper 250mm *Continuity Bond 2 way *Engineers File 0 /2 Round 2nd Cut *Engineer s File 8 Round 2nd cut Engineer s Pliers 200mm Extension Bar /2 Sq Drive 25mm General Purpose Cover 450 x 250mm Groove Joint Pliers 300mm Hack Knife 245mm Insulated Hacksaw 300mm Blade *Hepwedge Core Sep.60mm Junior Hacksaw 50mm Blade *Maxi Hepwedge Core Sep.262mm *Mini Hepwedge Core Sep.30mm Nut Spinner 8mm Open Ended Spanner 3mm Open Ended Spanner 7mm Open Ended Spanner 9mm Open Ended Spanner 7/6 W Ratchet - Reversible /2 Sq Drive *Rule - Plastic Measuring 2m Long Safety Clamp Short 45mm jaw Saw - Depth Gauge 20mm blade 24tpi Screwdriver.0 x 5.5 x 50mm Screwdriver.6 x 0.0 x 200mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 8mm Socket 6pt /2 Drive 9mm *Tin Snips - 0 /250mm Wedge - Hybrid Neutral * Non insulated * Tool Box Cantilever Metal *ABS Folding Rule mtr/39 *Bench Shears/ Scissors 8 *Cable Core Former 3C *Cable Core Spreader 3 Way 95-00mm 2 *Cable Core Wedge 50 x 25 x 5mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper 250mm Cable Jointer's Coring Knife *Cable Knife - Heavy Duty *Cable Knife Curved Blade Connector Holding Tool 2 Part Adj *Engineer's File 0 /2 Round 2nd Cut *Engineer's File 0 Bastard Cut 26 tpi *Engineer's File 0 Second Cut 36 tpi *Engineer's File 8 Round 2nd Cut Engineer's Pliers 200mm Extension Bar /2 Sq Drive 25mm *File Card Brush *File/Rasp Second Cut Half Round 8 Flanged Chisel *Flint Gun Groove Joint Pliers 300mm Hacksaw 300mm Blade *Hammer - Ball Pein 6oz / 454g Junior Hacksaw 50mm Blade *Lead Scraper (Triangular) *Thinline Diameter Tape 2m Mirror - Jointer's 25 x 00mm *Oil Bath Saucepan 8 w/basket *Outside Caliper 6 *Outside Caliper 8 *Paraffin Wax Pellets - kg Bag Pliers 60mm Long Nose *Probe Therm C with Case Reversible Ratchet /2 Sq Drive Saw - Depth Gauge 20mm blade 24tpi Screwdriver.2 x 6.5 x 50mm Screwdriver.2 x 8.0 x 75mm Screwdriver PZ Size 2 x 00mm Screwdriver PZ Size 3 x 50mm Side Cutters 60mm *Socket 5/6 - /4 Sq Drive Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 4mm Socket 6pt /2 Drive 5mm Socket 6pt /2 Drive 6mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 8mm Socket 6pt /2 Drive 9mm *Socket 7mm - /4 Sq Drive *Socket 8mm - /4 Sq Drive *Spirit Level 0 *Bradawl /4 Blade 3/32 Tip T Bar Allen Key 3mm x50mm *Torque Driver *Wire Brush - 4 Row Stainless Steel *Multi-Purpose Snips 90mm * Non insulated 5

28 Tool Kits / Sets Cont. Tool Kits / Sets Cont. Jointer's General Tool Kit 2 [kg] 9250/KIT Jointer's General Tool Kit 2 6 Lineman s Tool Kit 2 [kg] 24TBHB/KIT2 Lineman s Tool Kit 2.5 Contents Contents 25mm * Tool Box Cantilever Metal File/Rasp Second Cut Half Round 8 Screwdriver PZ Size 3 x 50mm *Tool Bag 24 Hard Base Hacksaw 300mm Blade Screwdriver.0 x 5.5 x 50mm *ABS Folding Rule mtr/39 Flanged Chisel Side Cutters 60mm Adjustable 200mm/8 Spanner *Hammer Claw 20oz Screwdriver.2 x 8.0 x 75mm *Bench Shears/ Scissors 8 Groove Joint Pliers 300mm *Socket 5/6 - /4 Sq Drive Adjustable 300mm/2 Spanner Junior Hacksaw 50mm Blade Screwdriver PZ Size 2 x 00mm *Cable Core Former Hacksaw 300mm Blade Socket 6pt /2 Drive 3mm Allen Key Screwdriver 3mm Podger 3 x 7mm Side Cutters 60mm *Cable Core Spreader 3 Way 95-00mm 2 *Cable Core Wedge 50 x 25 x 5mm *Cable Core Wedge 225 x 25 x 38mm Cable Cropper 250mm Cable Jointer's Coring Knife *Cable Knife - Heavy Duty *Cable Knife Curved Blade Connector Holding Tool 2 Part Adj *Engineer's File 0 /2 Round 2nd Cut *Engineer's File 0 Bastard Cut 26 tpi *Engineer's File 0 Second Cut 36 tpi *Engineer's File 8 Round 2nd Cut Engineer's Pliers 200mm Extension Bar /2 Sq Drive 25mm *File Card Brush *Hammer - Ball Pein 6oz / 454g Junior Hacksaw 50mm Blade *Lead Scraper (Triangular) *Thinline Diameter Tape 2m Mirror - Jointer's 25 x 00mm *Multi-Purpose Snips 90mm *Outside Caliper 6 *Outside Caliper 8 Pliers 60mm Long Nose *Spare Flints (pk 5) for Reversible Ratchet /2 Sq Drive Saw - Depth Gauge 20mm blade 24tpi Screwdriver.2 x 6.5 x 50mm Screwdriver.2 x 8.0 x 75mm Screwdriver PZ Size 2 x 00mm Socket 6pt /2 Drive 4mm Socket 6pt /2 Drive 5mm Socket 6pt /2 Drive 6mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 8mm Socket 6pt /2 Drive 9mm *Socket 7mm - /4 Sq Drive *Socket 8mm - /4 Sq Drive *Spark Lighter / Flint Gun *Spirit Level 0 *Bradawl /4 Blade 3/32 Tip T Bar Allen Key 3mm x50mm *Torque Driver *Wire Brush - 4 Row Stainless Steel * Non insulated Allen Key Screwdriver 7mm Cable Cropper 250mm Cable Jointer's Coring Knife Engineer's Pliers 200mm Engineer's Pliers 250mm *Engineer's Pliers 250mm Extension Bar /2 Sq Drive Lineman s Tool Kit 3 Podger 7 x 9mm *Ratchet Cable Cropper *Reversible Ratchet /2 Sq Drive *Ring Ratchet Podger 3x7mm *Ring Ratchet Podger 7x9mm *Saw - Bow 24 Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 9mm *Tape Measure 5m *Wedge Set ABC * Non insulated [kg] 24TBHB/KIT3 Lineman s Tool Kit 3 Contents *Tool Bag 24 Hard Base Allen Key Screwdriver 7mm Screwdriver.0 x 5.5 x 50mm Linking Tool Kit [kg] *Engineer's Pliers 250mm *Hammer Claw 20oz *Ring Ratchet Podger 3 x 7mm *Ring Ratchet Podger 7 x 9mm Cable Cropper 250mm Cable Jointer's Coring Knife Engineer's Pliers 200mm Engineer's Pliers 250mm Screwdriver.2 x 8.0 x 75mm Screwdriver PZ Size 2 x 00mm Side Cutters 60mm Socket 6pt /2 Drive 3mm 24TBHB/KIT Linking Tool Kit 7.5 *Saw - Bow 24 *Tape Measure 5m Extension Bar /2 Sq Drive 25mm Hacksaw 300mm Blade Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 9mm 52 Contents Tool Bag 24 Hard Base & Tool Roll - 5 Pocket Extension Bar /2 Sq Drive 25mm Link Extractor Female /4 W Link Extractor Female 3/8 BSF Link Extractor Male /4 W Link Extractor Male 3/8 W Open Ended Spanner 3mm Open Ended Spanner 7mm Open Ended Spanner 9mm Open Ended Spanner 22mm Open Ended Spanner 24mm Open Ended Spanner 7/6 W Reversible Ratchet /2 Sq Drive Safety Clamp 65mm jaw Screwdriver.6 x 0.0 x 200mm Shroud - Elect Insulating 95xx000mm Socket 6pt /2 Drive 3mm Socket 6pt /2 Drive 7mm Socket 6pt /2 Drive 9mm Water Pump Plier 240mm * Non insulated *Wedge Set ABC Adjustable 200mm/8 Spanner Adjustable 300mm/2 Spanner Allen Key Screwdriver 3mm Junior Hacksaw 50mm Blade Podger 3 x 7mm Podger 7 x 9mm Reversible Ratchet /2 Sq Drive * Non insulated 53

29 Tool Cases Tool Roll Manufactured from hard wearing polyester Double stitched at stress points 5 pocket compartments Part No Description Dimensions Weight TR5 Tool Case Folding - Black 675 x TR5 Tool Case Leather Fold out front compartment Removable middle partition 47 pocket compartments Document compartment Snap fit lock Optional shoulder strap *Contents not included Part No Description Dimensions Weight Tool Case Red Leather 450 x 50 x Shoulder Strap 300 x Tool Case Folding 4 pocket 4 pocket compartments Manufactured from vinyl Snap fit lock *Contents not included Part No Description Dimensions Weight Tool Case Folding - Black 320 x 60 x Tool Case Leather Fold out front compartment Removable middle partition Aluminium edge reinforcement 45 pocket compartments Document compartment Snap fit lock Optional shoulder strap *Contents not included Tool Case Folding 26 pocket 26 pocket compartments Manufactured from vinyl Snap fit lock *Contents not included Part No Description Dimensions Weight Tool Case Red Leather 470 x 50 x Shoulder Strap 300 x Tool Box Professional Part No Description Dimensions Weight Tool Case Folding - Black 380 x 50 x Tool Case Leather Fold out front compartment Snap fit lock Optional shoulder strap *Contents not included Part No Description Dimensions Weight Tool Case Red Leather 230 x 90 x Shoulder Strap 300 x Large capacity Removable tote tray Full length, fold down handle Steel fastening latches Splash proof Part No Description Dimensions Weight 240 Tool Box Professional x 275 x Tool Bag Hard Base Heavy duty polyester with hard plastic base 7 side pockets Heavy duty zip Reinforced with a metal frame for stability and strength 24TBHB 240 *Contents not included Part No Description Dimensions Weight 24TBHB Tool Bag Hard Base 60 x 300 x

30 Stripping Tool for Peelable Semi Conductive Screen Stripping Tools - Set To strip the non-vulcanized semiconductive layer of MV cables Longitudinal, helical and circular cuts Positioned on the cable like a vice Stop clamp to limit the stripping length Step-by-step depth adjustment Max. rotating diameter 30mm The positioning of the stripper and holding of stop-clamp is assured by the pressure of the stripping The incision depth can be adjusted from 0 to 0.9mm with 0.mm trips each by turning the corresponding knob The longitudinal and circumferential incision can be performed in one action Application range: 6-4mm Insulation thickness: 0-2mm Suggested application: Non vulcanized, peelable semiconductive layer Designed to strip the outer sheaths, semiconductive layer and to remove the primary insulation. Optimal equipment for for the realisation of the entire stripping procedure of most diverse cable types. Kit contents: Cable sheath cutting plier set Insulation Removal Tool Shaver for bonded semi-conductive screen Stripping Tools - Set Shaver for Bonded Semi Conductive Screen Shaving starts directly at the cable end Cutting depth of blade is adjustable Automatic feed Spring loaded cutting blade to allow for oval shaped cables Adjustable from 6-40mm (244750) or mm (244760) Shaver for bonded semi-conductive screen Ø 6 to 40mm Stop Rings set of 0 (244750) Shaver for bonded semi-conductive screen Ø 34 to 60mm Stop Rings set of 8 (244760) Plastic carry case for p/n / Spare blade for / Tube Silicone paste for use with / Cable Sheath & Insulation Removal Tool 3 4 One tool - two functions Removes outer sheath and also XLPE insulation 2 Types GB-M20 - Ø 5 to 50mm and GB-M30 - Ø 32 to 70mm Both tools give quick, safe and precise cutting GB-M20 GB-M Stripping set for peelable semi conductive screen (3 piece) Stripping tool for peelable semi-conductive screen Stop clamp for use with Spare blade for Silicone paste for use with GB-M20 Cable sheath cutter & insulation removal tool - cable range Ø 5-50mm 000 GB-M20/S5 Spare set of plastic rollers (GB-M20) 200 GB-M20/S8 Set of spare blades (5), 0mm cutting depth (GB-M20) 50 GB-M20/S9 Plastic insert to cut VPE Insulation 30 GB-M30 Cable sheath cutter & insulation removal tool - Ø 32-70mm 200 GB-M30/S5 Spare set of plastic rollers (GB-M30) 200 GB-M30/S8 Set of spare blades (5), 0mm cutting depth (GB-M30) 50 GB-PM20-BOX Storage Case for GB-M20/M

31 Insulation Chamfering Tool Shaver - Bonded Screen 40-0mm Ø Designed for chamfered cuts of primary insulation of MV cables (2x 45 ) Positioning on the cable with a clamp system Tool fitted with PTFE plates ensuring optimal sliding on the cable without the use of siliconce paste Replaceable blade Rotation diameter max. 200m This tool is not suitable for pencilling Interchangeable blade Application range: Ø 5-60mm Suggested application: Any type of primary insulation For peeling the extruded semicon layer of HV cables Working range of the tool is between 40 up to 0mm Ø Smooth surface finish The tool can be set to different cable diameters by adjusting the bearing wheel Cutting depth can be adjusted in steps of 0.mm Automatic speed can be set by adjusting the speed unit Insulating Chamfering tool Ø 5-60mm Spare blade 20 Insulation Chamfering Tool Suitable for round MV cables up to 300mm 2 For cable diameters from 5 to 40mm Removes the square edge on XLPE insulation to avoid damage to push-on termination joints KG Shaver - Bonded Screen 40-0mm Ø Spare blade 00 Cable Stripper - Outer Sheath & Insulation For cutting and removal of the outer sheath and insulation Two functions in one tool Working range of tool is between 50 up to 30mm Ø Standard length of blade is 22mm - other length available on request Two cutting speeds can be achieved Additional position for circular cutting KG05-3 Chamfering tool Ø 5-40mm 200 KG05-SI Spare blade 20 Cable Stripper Removes PVC, PE and EPR insulations Suitable for single-core or three core cables Max insulation thickness: 35mm Operating range Ø 80-28mm PG Cable Stripper - Outer Sheath & Insulation 5000 Part No Description Capacity Size Weight Spare blade PG6 Cable Stripper Ø 80-28mm 450x20x

32 Consac Sheath Cutting Tool Designed to cut the aluminium sheath on Consac cable to facilitate jointing and terminating. The tool provides safe and accurate cutting of the sheath without the risk of cutting the live inner conductor Exact cutting depths are achieved when using the different size cutting wheels T handle is available to assist the operation of the tool Consac Sheath Punch is available in two sizes - Ø 7 or 0 mm Complete sheath cutting kit in plastic case available on request Insulated Sheath Lifters, two types available - all plastic or coated metal (see picture) Insulating Shrouding kit available - details on request Cable Jointer s Inspection Mirror A useful aid for inspection of cable joints in confined areas. Mirror manufactured from plastic Rubber moulded casing for easier handling Manufactured from non-conductive materials JM Cable jointer s mirror 25 x 00mm 90 JM 936-HP MK3 Consac Sheath Cutter MK3 - Ø mm MK4 Consac Sheath Cutter MK4 - Ø mm AK Allen Key for MK3/MK4 Cutter TB T-bar for MK3/MK4 Cutter WP Spare wheel pin for MK3/MK4 Cutter PPMK3 Spare set of plastic pads (2) for MK3 Cutter PPMK4 Spare set of plastic pads (2) for MK4 Cutter 35 CS90/DB76 Plastic case to hold MK3 sheath cutter and accessories HP7 Consac Hole Punch 7mm HPI0 Consac Hole Punch 0mm Insulated Consac Sheath Lifter (metal) Insulated Consac Sheath Lifter (all plastic) MK3 Damp Testing Saucepan A must for all cable jointers when damp testing paper insulation on cables. Small and easily transported Lockable lid to prevent spilling Use with paraffin wax pellets Thermometer fits in lid so that the saucepan lid can remain on when the wax is heating up Supplied with inner basket to remove any waste material in the wax Damp testing saucepan with inner basket and clip on lid kg bag of wax granules to go in saucepan Probe thermometer C, supplied in plastic wallet 00 Torque Limiting Screwdriver Mainly used by cable jointers where a specific torque setting is required on cable connectors or jubilee clips. 2 Cutting Wheels Preset values from to 3.6 Nm /4 square drive - male Supplied in plastic wallet Sockets available on request Recalibration service available Part No. Cutting Depth Markings Cable Size Weight mm 0.9mm 70mm mm. mm 70mm mm.6mm mm 3.0mm Torque limiting driver - preset from to 3.6 Nm 350 (please state required torque setting when ordering) mm.7mm 85mm 2 85mm 2 35 ESM406 Socket /4 Drive 6mm mm.04mm 95mm 2 95mm 2 35 ESM407 Socket /4 Drive 7mm mm.5mm 85mm 2 85mm 2 35 ESM408 Socket /4 Drive 8mm mm.4mm 20mm 2 20mm Converter ¼" hex to ¼" Sq male mm 2.0mm 300mm 2 300mm

33 HV Switchboard Rubber Matting Tested to IEC6 Standard colour grey Other colours available, minium production run applies Cut lengths available per metre Flame retardant, oil & acid resistant Upperside Ribbed / Underside Fabric Impression LV & HV Switchboard Rubber Matting Voltages from 450V to 36,000V Inlcuding *Low Smoke Flame Retardant option Cut lengths available per metre Part No Safety Test Working Width Thickness Weight Standard Standard Voltage [kv] Voltage [kv] [kg] Roll Length [m] IEC6 Class R IEC6 Class IEC6 Class R IEC6 Class IEC6 Class R IEC6 Class IEC6 Class IEC6 Class Part Safety Test Working Width Thickness Weight Standard No Standard Voltage [kv] Voltage [V] per roll [kg] Roll Length [m] N/A N/A BS BS /LSFR* ASTM D , Type 2 Class 20543/LSFR* ASTM D , Type 2 Class ASTM D , Type Class ASTM D , Type Class 4 3 HV Switchboard Rubber Matting Tested to IEC6 Flame Retardant / Oil & Acid Resistant Fabric Finish on both sides Cut lengths available per metre Part No Safety Test Working Width Thickness Weight Standard Standard Voltage [kv] Voltage [kv] [kg] Roll Length [m] IEC6 Class IEC6 Class HV Switchboard Rubber Matting Tested to IEC6 Standard colour black Flame Retardant / Oil & Acid Resistant Upperside Corrugated / Underside Fabric Impression Cut lengths available per metre Cable Tray Matting Basket matting alleviates the problem of cables being damaged when laid directly on the wire basket Available in.5mm thickness up to a maximum width of 000mm Cut lengths available per metre Part No Description Size Cable Tray Grey 00mm x.5mm x0m Cable Tray Grey 50mm x.5mm x0m Cable Tray Grey 200mm x.5mm x0m Cable Tray Grey 300mm x.5mm x0m Cable Tray Grey 450mm x.5mm x0m Cable Tray Grey 500mm x.5mm x0m Part No Safety Test Working Width Thickness Weight Standard Standard Voltage [kv] Voltage [kv] [kg] Roll Length [m] IEC6 Class

34 Static Dissipative Matting Tough, long lasting and anti-fatigue Designed to protect operatives from static build-up Easy wipe clean surface Grounded via a 0mm male stud fitted to the mat Maximum performance when used with floor mat grounding wire Resistance measurements are x 0 9 Ω to x 0 0 Ω Anti Stat Mat Bench Mat Kits Superior three layer static dissipative bench matting in blue or grey Each mat is supplied with a male stud to connect to common point wire Wrist band with 0mm male stud to connect to coil cord Coil cord 0mm male stud and 0mm female stud incorporating 4mm banana socket length 4.5m Earth bonding plug to connect lead to earth Designed to protect the bench, components and operatives from static electricity Kit contents Static dissipative mat Male stud to connect to grounding wire 2m floor mat grounding wire 2 x heel grounders Earth bonding plug Kit contents Benchmat Male stud to connect to common point wire Wrist band with 0mm male stud to connect to coil cord Coil cord 0mm male stud and 0mm female stud -.8m long Common point ground wire 0mm male stud and 0mm female stud inc. 4mm banana socket - 4.5m long Earth bonding plug to connect lead to earth Part No Description Size Weight AS Bench Mat 600 x per linear metre AS/KIT Bench Mat Kit 6 piece 600 x per linear metre AS Bench Mat 900 x per linear metre AS/KIT Bench Mat Kit 6 piece 900 x per linear metre AS Bench Mat 200 x per linear metre AS/KIT Bench Mat Kit 6 piece 200 x per linear metre 3400 Part No Description Size Weight (9mm thick) [kg] AS Static Dissipative Matting 600 x AS/KIT Static Dissipative Matting Kit - 6 piece 600 x AS Static Dissipative Matting 900 x AS/KIT Static Dissipative Matting Kit - 6 piece 900 x AS Static Dissipative Matting 900 x 8.3m AS/KIT Static Dissipative Matting Kit - 6 piece 900 x 8.3m AS Static Dissipative Matting 900 x per linear metre* AS/KIT Static Dissipative Matting Kit - 6 piece 900 x per linear metre* 3.5 * maximum length 8m WB Wrist Band IEC HG Heel Grounder with meg Ω CC Coil Cord.8m CPGW Common Point Ground Wire 4.5m GW Floor Mat Grounding Wire 2m BPUK UK Earth Bonding Plug BPEU European Earth Bonding Plug - 80 Demarcation Curtain A lightweight, flexible and practical means of panel demarcation, for use by Electrical Engineers whilst working with LV equipment The sheet measures 2,m in height, 700mm in width and is supplied with red and clear chevrons on the outer edges and green arrows on the inner edges They are also fitted with a magnetic strip which is fixed to the top and bottom of the sheet, making it easy to apply and to remove from panels They can be customised to suit customers specific requirements Part No Description Size (external) Weight Demarcation Curtain 700 x

35 Bodtect Overhead Line Shrouding Easily installed on overhead lines whilst offering complete protection Used to protect engineers working with live voltages up to 000V Conforms to ENTS standard Supplied as standard in 3 metre lengths, other lengths available Three separate sizes, 22mm, 32mm and 45mm internal diameter Snapfit Termination Piece secures span of shrouding in place prevents movement Line Tap Shrouds To provide protection for overhead line taps Manufactured from UV resistant plastic Protects against salt water damage Available in different colours and sizes minium order quantities applies Part No Description Size (external) Weight Part No Description Internal ø Length Weight Insulated BODTECT22 Bodtect Overhead Line Shrouding P BODTECT32 Bodtect Overhead Line Shrouding P BODTECT45 Bodtect Overhead Line Shrouding P BODCONNECT22 Bodconnect 22 Snapfit Connector x BODCONNECT32 Bodconnect 32 Snapfit Connector x BODCONNECT45 Bodconnect 45 Snapfit Connector x BODTERM22 Bodterm 22 Snapfit Termination Piece x BODTERM32 Bodterm 32 Snapfit Termination Piece x BODTERM45 Bodterm 45 Snapfit Termination Piece x M/26/86 Line Tap Shroud 4mm Black 42 x 30 0 M/26/87 Line Tap Shroud 6mm Black 46.5 x 40 2 M/26/88B Line Tap Shroud 22mm Black 7 x 4 x M/26/88 Line Tap Shroud 22mm Black Standard Model 0 x 57.6 x M/26/88C Line Tap Shroud 22mm Cream Standard Model 0 x 57.6 x Stay Wire Protection Spiral cover manufactured from yellow UV resistant plastic Customised lengths and kits available Provides visual identification of staywire SWP/SGX 6 Part No Size Weight SWP/SGX 6 3mm ID x 20m long 500 SWP/SGX 20 6mm ID x 20m long 2200 SWP/SGX 32 27mm ID x 20m long Rigid split tube manufactured from yellow UV resistant plastic Customised lengths and kits available Provides visual identification of staywire Each length supplied with three cable ties and pre-drilled holes SWP 22 Part No Size Weight SWP 22 22mm ID x.5m long 350 Rigid split tube manufactured from yellow UV resistant plastic Customised lengths available Provides visual identification of staywire Large diameter allows the tube to rotate when in contact with large animals Greatly reduces the risk of damage to staywire/pole SWP Part No Size Weight SWP mm ID x 2m long

36 Rubber Insulating Shrouding Manufactured from mm thick orange neoprene with nylon insert for added strength Used to protect engineers working with live voltages up to 000V Also available 4 types of insulated clamps to hold shrouding in position Used in many applications inc. underground cable jointing, overhead conductors and link box maintenance Approved to ENTS specification In line tested to ASTM F-2320 Higher working voltages available Part No Dimensions Weight Cuts and Rolls x x x x x x M 95 x M 95 x M 95 x R 95 x 0, x Transparent Insulating Shrouding Used to protect engineers working with live voltages up to 000V Easily installed Prevents accidental contact with live terminals Also available 3 types of insulated clamps to hold shrouding in position Part No Description Length Width Thickness Weight [m] [kg] 64952M Transparent shrouding Transparent shrouding LV Pocket Shroud Kits Used to protect engineers working with live voltages up to 000V Easily installed / removed Flexible in cold weather Manufactured from mm thick orange neoprene with nylon insert UV resistant with velcro edge fastening Material in line tested to ASTM F-2320 Approved to ENTS specification Higher working voltages available 599/KIT [Kg] 592/KIT Lineman s Shrouding Kit 7 Part No Contents Qty 599-TYPE- Reel Insulator Cover 300 x 400mm TYPE-2 Conductor Cover 750 x 80mm TYPE-3 D-Iron Assembly Cover 650 x 400mm TYPE-5 General Purpose Cover 450 x 250mm 5 24TBHB Tool Bag 24 Hard Base [Kg] 599/KIT Lineman s Shrouding Kit 6 Part No Contents Qty 599-TYPE-2 Conductor Cover 750 x 80mm TYPE-6 General Purpose Cover 700 x 300mm TYPE-7 Keyhole Cover 250 x 450mm 5 24TBHB Tool Bag 24 Hard Base [Kg] 599/KIT3 Lineman s Shrouding Kit 3 4 Safety Clamps Available in four sizes Rubber contacts in jaw to protect insulating material Joint with special guide ring Material made of non brittle plastic For use with orange neoprene or transparent shrouding Part No Contents Qty 599-TYPE-7 Keyhole Cover 250 x 450mm TYPE-5 General Purpose Cover 450 x 250mm TYPE-9 Conductor/D-Iron Cover 450 x 250mm TYPE- Blanket Shroud 600 x 600mm 24TBHB Tool Bag 24 Hard Base Part No Description Opening Length Width Weight 000V Insulated Safety Clamp with Hook P 6542 Safety Clamp 65mm P Safety Clamp, short P 76 77

37 LV Pocket Shroud Kits Cont. [Kg] 599/KIT4 Lineman s Shrouding Kit 4 Part No Contents Qty 599-TYPE-2 Conductor Cover 750 x 80mm TYPE-3 D-Iron Assembly Cover 650 x 400mm TYPE-6 General Purpose Cover 700 x 300mm TYPE-9 Conductor/D-Iron Cover 450 x 250mm TYPE-7 Keyhole Cover 250 x 450mm TYPE-2 Shroud- Elect Insulating 95xx2000mm 599-TYPE- Blanket Shroud 600 x 600mm 24TBHB Tool Bag 24 Hard Base [Kg] 599/KIT2 Jointer s Shrouding Kit Part No Contents Qty WALLET-PVC PVC Wallet 435 x 335mm Shroud 50 x 500mm Velcro Shroud 50 x 400mm Velcro Shroud 50 x 300mm Velcro Shroud 50 x 250mm Velcro Shroud 50 x 00mm Velcro 3 LV Pocket Shrouds Used to protect engineers working with live voltages up to 000V Easily installed / removed Flexible in cold weather Manufactured from mm thick orange neoprene with nylon insert UV resistant with velcro edge fastening Material in line tested to ASTM F-2320 Approved to ENTS specification Higher working voltages available Other sizes avaliable on request Part No Description Size Weight Insulated 599-TYPE- Type Reel Insulator Cover 300 x P 599-TYPE-2 Type 2 Conductor Cover 750 x P 599-TYPE-3 Type 3 D-Iron Assembly Cover 400 x P 599-TYPE-4 Type 4 Conductor Cover 2m x 50mm 2m x 50mm tba P 599-TYPE-5 Type 5 General Purpose Cover 250 x P 599-TYPE-6 Type 6 General Purpose Cover 300 x P 599-TYPE-7 Type 7 Key Hole Cover 250 x P 599-TYPE-8 Type 8 Conductor Cover 2000 x P 599-TYPE-9 Type 9 Conductor/D-Iron Cover 250 x 50/ P 599-TYPE-0 Type 0 Conductor Cover 0000 x P 599-TYPE- Type Blanket Shroud - Small 600 x P 599-TYPE-2 Type 2 Blanket Shroud Large 95 x P 4 599/KIT

38 Rubber Insulating Shrouding Tested to IEC62:2009 Class 0 Manufactured from Orange Elastomer Rubber.5mm thick Flame Retardant Oil & Acid Resistant Extremely flexible, even in cold weather Other voltage classes available on request Cut lengths available on request Part No Dimensions Weight Cuts and Rolls [kg] x x x x x x R 000x.5x0m M 000x.5x000mm R 200x.5x0m M 200x.5x000mm 2.4 Jointer s Shrouding Kit 60000M Jointer s Shrouding Kit Manufactured from Orange Elastomer Rubber.5mm thick Tested to IEC62:2009 Class 0 Used to protect engineers working with live voltages up to 000V Supplied with PVC wallet Part No 60-KIT/ Contents Description Jointer s Shrouding Kit Part No Description Size Insulated 60-TYPE Paper Insulated Lead Cable Shroud 300 x 300 P 60-TYPE 2 Neutral Shroud Extension Piece 300 x 70 P 60-TYPE 3 Neutral Shroud Extension Piece 200 x 70 P 60-TYPE 4 Large Neutral Cable Shroud 320 x 70 P 60-TYPE 5 Small Neutral Cable Shroud 080 x 70 P Manufactured from Orange Elastomer Rubber.5mm thick Tested to IEC62:2009 Class 0 Used to protect engineers working with live voltages up to 000V Supplied with PVC wallet Part No 60-KIT/2 Contents Description Jointer s Shrouding Kit Part No Description Size Insulated Weight 4 60-TYPE-6 Shroud with Velcro 80 x 200 P 60-TYPE-7 Shroud with Velcro 00 x 400 P 60-TYPE-8 Shroud with Velcro 80 x 460 P 60-TYPE-9 Shroud with Velcro 00 x 300 P 60-TYPE-0 Shroud with Velcro 270 x 200 P 60-TYPE- Shroud with Velcro 00 x 200 P 60-TYPE-2 Shroud with Velcro 00 x 200 P 60-TYPE-3 Shroud 65 x 000 P 60-TYPE-4 Shroud 65 x 500 P Shroud - CNE 20x35x70 P 80 8

39 Electrical Safety Gloves Fully insulating gloves each test stamped for working voltages ranging from 500V up to 36,000V manufactured to EN60903 Leather overglove worn over the insulating gloves to protect against mechanical hazards and electrical arcing Cotton undergloves give added comfort in warm and humid conditions The EN60903 and IEC903 standards advise visual inspection by inflation of the glove in order to detect air leaks. This can be carried out by the Pneumatic Glove Tester We can also re-test these gloves to the EN60903 Standard 058L 058LG Electrical Safety Gloves - Flex & Grip Fully insulating gloves each test stamped for working voltages ranging from 000V up to 36,000V manufactured to EN & IEC External surface keeps its non-slipping caracteristics even in wet conditions Latex used to produce the range give a maximum of suppleness for increased dexterity We can also re-test these gloves to the EN60903 Standard EN/IEC 60903:2003 Part Description Length Thickness Sizes Test Working Class No Voltage [V] Voltage [V] 0583 Insulating Gloves ,9,0, max Insulating Gloves ,9,0, max Insulating Gloves ,9,0, 0, max 0586 Insulating Gloves ,9,0, 20,000 7,000 max Insulating Gloves ,0, 30,000 26,500 max Insulating Gloves ,0, 40,000 36,000 max 4 058CGL Cotton Undergloves 250 N/A One size N/A N/A N/A -pack of 0 058L Leather Overgloves N/A 8,9,0,,2 N/A N/A N/A 058LG Leather Overgloves N/A 8,9,0, N/A N/A N/A /0 Part Description Length Thickness Sizes Test Working Class No Voltage [V] Voltage [V] 0574 Insulating Gloves ,9,0, max Insulating Gloves ,9,0, 0, max 0576 Insulating Gloves ,9,0, 20,000 7,000 max Insulating Gloves ,9,0, 30,000 26,500 max Insulating Gloves ,9,0, 40,000 36,000 max 4 EN/IEC 60903:2003 Accessories Part Description Length Thickness Sizes Test Working Class No mm Voltage Voltage 058T Pneumatic Glove N/A N/A One Size N/A N/A N/A Tester 058B Glove Storage 390 N/A One Size N/A N/A N/A Bag 058BX Glove Storage 370 N/A One Size N/A N/A N/A Box - Clear 058BXL Glove Storage 430 N/A One Size N/A N/A N/A Box - Blue 5 058B 058BX 058T *Gloves not included Testing gloves to the EN60903 & IEC60903 Standard 82 83

40 Arc Flash Protection GARMENTS All fabrics, including thread, used in construction of ARC garments are inherently flame retardant Will remain flame retardant regardless of repeated laundering Lightest weight arc flash garments currently on the market Help reduce heat stress Meets or exceeds the requirements of NFPA 70E and ASTM F506 HOODS Manufactured with ARCX energy absorbing polycarbonate plastic Provide superior visible light transmission Specially designed window for each arc level maximizes visible light transmission Scratch resistant coating on the outer surface (for longer product life) Antifog coating on the inner surface (for improved visibility) Meets NFPA 70E, ASTM F278 and ANSI Z87. Specify garment size when ordering available small to 5XL Arc 5 Arc 40 NFPA 70E Category 4 Arc 40 Hood Arc 40 Coat Arc Rating 49 cal/cm 2 ATPV Fabric Weight 2. oz/yd 2 Hood Window VLT 52% Part No Description IFR4A Set - Coverall, Hood with Hard Cap Set 2 - Coat, Bib-Overall, Hood with Hard Cap ARC40-C Hood ARC40-CT Hip Length Coat ARC40-BIB Bib-Overalls ARC40-CVL Coverall Arc 65 Category 5 - Arc Rating 70 cal/cm 2 ATPV Fabric Weight 5.5 oz/yd 2 Hood Window VLT 42% NFPA 70E Category 2 Arc Rating 5 cal/cm 2 ATPV Fabric Weight 8.9 oz/yd 2 Hood Window VLT 57% Set 2 - Coat, Bib-Overall, Hood with Hard Cap Part No ARC65-C Hood Description ARC65-CVL ARC65-CT Part No Description Set - Coverall, Hood with Hard Cap Set 2 - Coat, Bib-Overall, Hood with Hard Cap Hood ARC5-CT Hip Length Coat ARC5-BIB Bib-Overalls ARC5-CVL Coverall Arc 25 NFPA 70E Category 3 Arc Rating 29 cal/cm 2 ATPV Fabric Weight 0 oz/yd 2 Hood Window VLT 57% Hood ARC25-BIB Coverall Set - Coverall, Hood with Hard Cap Set 2 - Coat, Bib-Overall, Hood with Hard Cap ARC65-C Hood ARC65-CT Hip Length Coat ARC65-BIB Bib-Overalls ARC65-CVL Coverall Arc 00 Category 6 - Arc Rating 06 cal/cm 2 ATPV Fabric Weight 8.2 oz/yd 2 Hood Window VLT 22% Set 2 - Coat, Bib-Overall, Hood with Hard Cap 5 Part No Description Part No Description 84 IFR3A Set - Coverall, Hood with Hard Cap IFR3B Set 2 - Coat, Bib-Overall, Hood with Hard Cap Hood ARC25-CT Hip Length Coat ARC25-BIB Bib-Overalls Coverall IFR6A Set - Coverall, Hood with Hard Cap Set 2 - Coat, Bib-Overall, Hood with Hard Cap Hood Hip Length Coat Bib-Overalls ARC00-CVL Coverall 85

41 Safety Rescue Hook Used for retrieval of victims of electric shock Two sizes kv + 60kV system voltage Safeguards the life of the first aider The hook station offers safe storage for the hook Should be placed in a prominent and easily accessible position near to the live site Cable Guard Protection of vertical/horizontal cable runs on wooden poles, fences and walls Manufactured from HDPE which provides excellent protection against vandalism and accidental vehicle contact Can also be used to protect other utility supplies on walls i.e. gas, oil, water Supplied with screw fixing holes for easy installation Lightweight and easily transported With UV and flame retardant additives Others colours and sizes available on request (hook not included) C8765 C8703 C8666 Part No Description Dimensions Weight Safety Rescue Hook kv 25 Ø x Safety Rescue Hook 60kV 35 Ø x Safety Rescue Hook Station kv (hook not included) 580 x Safety Rescue Hook Station 60kV (hook not included) 580 x Insulating Platform Manufactured from copolymer polypropylene plastic, according to the Standard UNE Rough, non-slip surface Rubber feet gives high adherence to the floor surafce Stable, high impact and slip resistance Platform: 525 x 525mm; Surface: 575 x 575mm Part No Description height Working Voltage Weight [kv] [kg] Insulating Platform Insulating Platform Insulating Platform Fibreglass Ladders EN3 Approved Suitable for 000V working Easy climb tread spacing on steps Part No Description Safe Working Weight height [m] [kg] tread Heavy Duty Fibreglass Steps tread Heavy Duty Fibreglass Steps tread Heavy Duty Fibreglass Steps Part No Description Dimensions Weight C8666 Cableguard HDPE Black ø 9mm x 3.0m 790 C8680 Cableguard HDPE Black ø 25mm x 3.0m 840 C8703 Cableguard HDPE Black ø 38mm x 3.0m 40 C8727 Cableguard HDPE Black ø 50mm x 3.0m 420 C874 Cableguard HDPE Black ø 64mm x 3.0m 600 C8765 Cableguard HDPE Black ø 80mm x 3.0m 2000 C8789 Cableguard PVC Black ø 00mm x 3.0m 4700 C8790 Cableguard PVC Black ø 00mm x 3.3 m 5200 Cable and Hose Ramps For the protection of Cables/Hoses from traffic, allowing all types and weights of vehicles to drive over them safely The ramps sit on the road surface slowing down the traffic as they pass over them Different sizes available, to cover varying cable diameters HR2 Open HR2 Closed Part No Description Dimensions Weight [kg] HR2 Hose Ramp 970 x 580 x HR3 Hose Ramp 855 x 302 x 84 3 HR4 Hose Ramp 830 x 320 x 02 6 HR5 Hose Ramp 00 x 290 x HR6/BL Hose Ramp Block 600 x 400 x 5 33 HR6/WE Hose Ramp End 550 x 400 x

42 Cable Protect Prevents accidents caused by trailing cables and leads Cable protect can be used indoors and outdoors and on roads to protect temporary traffic light cables, etc. Manufactured in flexible vinyl and tested to BS6458 and BS2782 Easily installed simply unroll and cut to desired length Cables or leads can be pulled through the bore hole, or the cable protect can be slit at the base for easy insertion of cable Cut lengths available upon request C488 Cable Protect C4022 Cable Protect Phone C40964 Cable Protect Combi Part No Description Hole Overall Size Colour Application Size C4022 Cable Protect Phone 6 x 8 67 x 2 x 9m Black/Grey Up to 4 phone leads C40964 Cable Protect Combi 6 x 0 each 93 x 9 x 9m Black/Grey Separating groups of cables C4084 Cable Protect Multi 30 x 0 80 x 8 x 9m Black/Grey Multiple cables C4086 Cable Protect Multi 30 x 0 80 x 8 x 9m Clear Multiple cables C40988 Cable Protect Speedi 75 x 6 x 9m Black/Grey Rapid installation C4046 Cable Protect Double each 8 x 5 x 9m Black/Grey Separation of cables and leads C40940 Cable Protect Large 4 90 x 8 x 9m Black/Grey Larger diameter cables & leads Also available DTp approved C4008 Cable Protect Power x 34 x 5m Black only Power & armoured cables up to ø C4849 Cable Protect Comnet 32 x 2 0 x 20 x 9m Black/Grey Ideal where power & data lead Capacity is unequal C488 Cable Protect Hazard 30 x 0 80 x 8 x 9m Blk/Yellow C x 0 80 x 8 x 9m Wt/Blue C x 0 80 x 8 x 9m Wt/Red Eye catching stripes C4036 Cable Protect Micro x 5 x 9m Black only Slit base for easy cable insertion Use with small cables C4084 Cable Protect Multi C4086 Cable Protect Multi C4046 Cable Protect Double C40940 Cable Protect Large C4206 Cableprotect H/Duty x 30 x 9m Black Suitable for temporary traffic C4208 Cableprotect H/Duty x 55 x 4m Black Suitable for temporary traffic C4008 Cable Protect Power C4849 Cable Protect Comnet C488 Cable Protect Hazard C4883 Cable Protect Hazard C4885 Cable Protect Hazard C4036 Cable Protect Micro C40988 Cable Protect Speedi 30mm 5 mm 20mm 00mm 5 mm C4206 Cable Heavy Duty 6 55mm 40mm 5 mm 65mm 5 mm 90 C4208 Cable Heavy Duty 9

43 Ball Point Connectors (for conductors and earth installations) Ball Ø Ball Point Connectors Cont. (for conductors and earth installations) Ball Point Connectors - threaded bolt Secure connection between fixed point and connection clamp guarantees safety in case of high dynamic and thermal loads during a short circuit The spherical heads of the fixed points are manufactured with a very high quality surface Threaded bolts are dimensioned for high dynamic forces Made of high-tensile copper alloy F65, tin plated Nuts and spring washers manufactured from galvanized steel 5507 L L Angled, female thread Secure connection between fixed point and connection clamp guarantees safety in case of high dynamic and thermal loads during a short circuit The spherical heads of the fixed points are manufactured with a very high quality surface 45 angled ball point connectors Female Thread, without bolt Made of high-tensile copper alloy F65, tin plated Part No Description Dimensions Ball Ø I r / t r Connection Thread Weight L L Key Size SW [ka / s] resp. hole Ø L L D Part No Description Dimensions Ball Ø I r / t r Connection Thread Weight L L Key Size SW [ka / s] resp. hole Ø 5506 Ball Point Connector / 0.5 M0 50 (threaded bolt) 5507 Ball Point Connector / 0.5 M2 200 (threaded bolt) Ball Point Connector / 0.5 M2 200 (threaded bolt) Ball Point Connector / 0.5 M2 400 (threaded bolt) 5505 Ball Point Connector / 0.5 M6 350 (threaded bolt) 5504 Ball Point Connector / 0.5 M6 400 (threaded bolt) D Ball Point Connector / 0.5 M2 00 (angled at 45, female thread) 5536 Ball Point Connector / 0.5 M2 200 (angled at 45, female thread) Ball Point Connector / 0.5 M6 200 (angled at 45, female thread) Ball Point Connectors - for round conductors Secure connection between fixed point and connection clamp guarantees safety in case of high dynamic and thermal loads during a short circuit The spherical heads of the fixed points are manufactured with a very high quality surface For round conductors Conductor clamping piece retained by 2 screws Manufactured from copper F20, tin plated Bolts made of stainless steel D L Part No Description Dimensions Ball Ø I r / t r Connection Thread Weight L L Key Size SW [ka / s] resp. hole Ø Ball Point Connectors - straight, female thread Secure connection between fixed point and connection clamp guarantees safety in case of high dynamic Ball Point Connector / 0.5 up to (for round conductors) Ball Point Connector / (for round conductors) and thermal loads during a short circuit The spherical heads of the fixed points are manufactured with a very high quality surface Straight ball point connectors Ball Point Connector / (for round conductors) Ball Point Connector / (for round conductors) Female Thread, without bolt Made of high-tensile copper alloy F65, tin plated Part No Description Dimensions Ball Ø I r / t r Connection Thread Weight L L Key Size SW [ka / s] resp. hole Ø Ball Point Connector / 0.5 M2 200 (straight, with female thread) Ball Point Connector / (for round conductors) Ball Point Connectors - for busbar packages Secure connection between fixed point and connection clamp guarantees safety in case of high dynamic and thermal loads during a short circuit The spherical heads of the fixed points are manufactured with a very high quality surface With lug for connection to busbar packages Ball Point Connector / 0.5 M2 350 (straight, with female thread) 550 Ball Point Connector / 0.5 M6 350 (straight, with female thread) Part No Description Dimensions Ball Ø I r / t r Weight [ka / s] Ball Point Connector Lug 60 x 0, Length / with lug connection 7 0