Pliers. Contents. Pliers. Pliers Introduction E.2 E.1. VDE-insulated combination pliers E.3. VDE-insulated diagonal-cutting pliers E.

Transcription

1 Contents Introduction.2 VD-insulated combination pliers.3 VD-insulated diagonal-cutting pliers.4 VD-insulated telephone pliers.5 VD-insulated flat- and round-nose pliers.6 VD-insulated special function pliers.7 SD pliers.8.1

2 Introduction Working on live systems calls for special safety procedures and special tools specially produced and tested for such applications. Weidmüller can provide users with a complete range of pliers complying with national and international testing standards. All Weidmüller pliers are produced and tested to DIN N Their ergonomic design fits snugly in the hand, resulting in a more natural, non-fatiguing hand position so you don t catch your fingers.

3 VD-insulated combination pliers VD-insulated combination pliers KBZ 160 / KBZ 180 / KBZ 200 KBZI 200 up to 1000 V (AC) and 1500 V (DC) protective insulation to IC 900, DIN N drop-forged from high-quality special tool steels safety handle with ergonomic and non-slip TP VD sleeve made from shockproof, heat-and cold-resistant, not readily flaable, cadmium-free TP (thermoplastic elastomer) elastic grip zone and hard core polished surface nickel-chromium electrogalvanised coating protects against corrosion Combination pliers Heavy-duty combination pliers (telephone pliers) Combination pliers acc. to DIN ISO 5746 With opening gap (see diagram) Foil and sheet up to a thickness of 2.5 can be gripped with the tip When thickness does not exceed 2.5, the gripping force pulls the workpiece towards the joint xtra-long cutter for ribbon and round cables For cutting soft and hard wire 60 HRC Telegraph pliers (combination pliers), acc. to DIN 5746 Heavy-duty model for tough demanding jobs xtra-long cutter for ribbon and round cables For cutting soft and hard wire 60 HRC Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Tool data Cutter hardness Total length HRC g KBZ 160 KBZ 180 KBZ KBZI Version KBZ KBZI KBZ KBZ

4 VD-insulated diagonal-cutting pliers VD-insulated diagonal-cutting pliers KS 160 / KS 200 / S TOP S HD 140 / S HD 160 / S HD 180 up to 1000 V (AC) and 1500 V (DC) protective insulation to IC 900, DIN N drop-forged from high-quality special tool steels safety handle with ergonomic and non-slip TP VD sleeve made from shockproof, heat-and cold-resistant, not readily flaable, cadmium-free TP (thermoplastic elastomer) elastic grip zone and hard core polished surface nickel-chromium electrogalvanised coating protects against corrosion Professional diagonal-cutting pliers for piano wire Diagonal-cutting pliers for hard wire Diagonal-cutting pliers, acc. to DIN ISO HRC For cutting soft wire and piano wire KS KS 200 Optimized transmission of force Optimized precision cutting edge Diagonal-cutting pliers, acc. to DIN ISO 5749 With inlaid joint With precision cutting edges 62 HRC Special tool steel S TOP With inlaid joint xtra-fine precision cutting edge Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Conductor diameter, max. (P) Tool data Cutter hardness Total length HRC g KS 160 KS 200 S TOP S HD 140 S HD 160 S HD Version KS S HD KS S HD S TOP S HD

5 VD-insulated telephone pliers VD-insulated telephone pliers FRZ SG 160 / FRZ SG 200 FRZ S 160 / FRZ S 200 up to 1000 V (AC) and 1500 V (DC) protective insulation to IC 900, DIN N drop-forged from high-quality special tool steels safety handle with ergonomic and non-slip TP VD sleeve made from shockproof, heat-and cold-resistant, not readily flaable, cadmium-free TP (thermoplastic elastomer) elastic grip zone and hard core polished surface nickel-chromium electrogalvanised coating protects against corrosion Bent half-round-nose pliers with cutter (telephone pliers) Half-round-nose pliers with cutter (telephone pliers) Bent telephone pliers with cutter acc. to DIN ISO 5745 Half-rounded jaws Serrated gripping surfaces Tip bent at HRC Special tool steel Telephone pliers with cutter to DIN ISO 5745 Half-rounded jaws Serrated gripping surfaces 60 HRC Special tool steel Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Tool data Cutter hardness Total length HRC g FRZ SG 160 FRZ SG FRZ S 160 FRZ S Version FRZ SG FRZ S FRZ SG FRZ S

6 VD-insulated flat- and round-nose pliers VD-insulated flat- and round-nose pliers up to 1000 V (AC) and 1500 V (DC) protective insulation to IC 900, DIN N drop-forged from high-quality special tool steels safety handle with ergonomic and non-slip TP VD sleeve made from shockproof, heat-and cold-resistant, not readily flaable, cadmium-free TP (thermoplastic elastomer) elastic grip zone and hard core polished surface nickel-chromium electrogalvanised coating protects against corrosion FZ 160 Flat-nose pliers RZ 160 Round-nose pliers Flat-nose pliers acc. to DIN ISO 5745 Serrated gripping surface With long jaw Round-nose pliers acc. to DIN ISO 5745 Serrated gripping surface With long jaw Tool data Total length g FZ RZ Version FZ RZ

7 VD-insulated special function pliers VD-insulated special function pliers VZZ S AIZ 160 up to 1000 V (AC) and 1500 V (DC)protective insulation to IC 900, DIN N drop-forged from high-quality special tool steels safety handle with ergonomic and non-slip TP VD sleeve made from shockproof, heat-and cold-resistant, not readily flaable, cadmium-free TP (thermoplastic elastomer) elastic grip zone and hard core polished surface nickel-chromium electrogalvanised coating protects against corrosion Multi-purpose pliers Wire stripping pliers Bent half-round-nose pliers with cutter, acc. to DIN ISO 5745 For gripping, guiding, removal, crimping and many other tasks Serrated gripping surface Tip bent at HRC Wire stripper to DIN ISO 5744 for stripping cables and wires up to 5 O.D. forged in die high-quality finish due to induction hardening adjusting screw and locknut for setting appropriate conductor diameter opening spring for convenient working special tool steel Stripping Stripping diameter, max. Max. cross-section of conductor Cutting performance Conductor diameter, max. (H) Conductor diameter, max. (MH) Tool data Cutter hardness Total length ² HRC g VZZ S AIZ Version VZZ S AIZ

8 Introduction SD pliers Weidmüller SD pliers can be used with precision and safety when working with sensitive electronics. lectrostatic charging is prevented by the special handle material. lectrostatic discharges (SD) present a danger to electronics that should not be underestimated. The transferral or discharge of an electrostatic charge can cause significant damage. Charges smaller than 100 volts can cause damage to sensitive components. However, SD with voltages under 2000 volts can not be felt by humans. When working with components which are particularly sensitive to electrostatic discharges, you need an electrostatic-free work environment and the properly designed tools. The SD pliers are particularly suited for use with electronics, including electronic switches and components, as well as with precision mechanics. All pliers feature an SD-protected two-coloured double-component plastic hand grip. The grip material in use complies with all of the requirements for SD hand-tool protection for working with SD-sensitive components. The 120 -long SD pliers are available individually or as part of a four-piece set: diagonal-cutting pliers, angle-cutting pliers, with pointed head, flat-nose pliers and snipe-nosed pliers. SD pliers are not appropriate for working with live components or component assemblies.

9 SD pliers S SD 120 lectronic SD diagonal-cutting pliers with pointed head S SD Hard wire (spring wire or steel nails): 0.4 /AWG 26 Semi-hard wire (iron or nails): 1.0 /AWG 18 Soft wire (copper or aluminium): 1.5 /AWG g S SD 125 lectronic SD diagonal-cutting pliers with oval head S SD Semi-hard wire (iron or nails): 0.8 /AWG 20 Soft wire (copper or aluminium): 1.5 /AWG g FZ SD 130 lectronic SD flat-nosed pliers FZ SD g SZ SD 130 lectronic SD Snipe-nosed pliers SZ SD g.9

10 SD pliers SVS SD 130 lectronic SD angle -cutting pliers Hard wire (spring wire or steel nails): 0.6 /AWG 22 Semi-hard wire (iron or nails): 1.0 /AWG 18 Soft wire (copper or aluminium): 1.2 /AWG 15 SVS SD g SUPR CUT lectronic diagonal-cutting pliers Soft wire (copper or aluminium): 1.2 /AWG 15 SUPR CUT g KOF ST SD lectronic SD case set Contents: KOF ST SD Diagonal-cutting pliers Snipe-nosed pliers Flat-nose pliers Angle-cutting pliers 547 g.10