GENERAL CATALOGUE 2011/12

Transcription

1 GENERAL CATALOGUE 2011/12

2 PLIERS ABC TECHNICAL BASICS BASIC SHAPES OF THE JAWS flat jaws half-round jaws round jaws JOINT CONNECTIONS Cuttin Pliers for cuttin or nippin (diaonal, centre and end cutters, carpenters pincers etc.) Grippin Pliers (flat-, lon-nose and water pump pliers etc.) Fored-in joint axle The rivet is part of one handle (fored from one piece) hih stability for hihest strain lon service life TYPES OF JOINTS Lap joint The two plier halves lie on top of each other but are not milled out. Sinle joint Half the thickness in each pliers handle is milled away in the joint area so that both handles can be laid into each other. Joint with inserted rivet A proved, sturdy and precise rivet connection for all standard pliers. Bolted joint For particularly demandin requirements in terms of precision and smooth operation, e.. in circlip pliers and cable shears (even the finest multi-stranded conductors have to be cut cleanly). Combined Pliers for cuttin and rippin (combination, stork beak and radio pliers etc.) point rippin surface recess (pipe rip) jaw flank additional cuttin ede Special Pliers for special applications, e.. notchin or punchin different types of materials (sheet-metal nibbler, tile nibblin pincers etc.) Box joint One handle on the pliers is slit. The other handle is pushed throuh this slot. This joint connection can withstand a hih level of load and strain because the joint bolt is supported on both sides and the inside handle is uided on both sides.

3 CUTTING CAPACITIES The maximum values indicated always stay for the performance limit under the most favourable cuttin conditions, when the wire is placed as near as possible to the joint. Article no. pae Article no. pae Lenth ø ø ø ø ,0-6,0 4,0 3,5 3, ,3-1,0 0, ,0 1,0 0, ,4 0, ,0 0,8 0,5 68 / , ,5 1,0 0,5 68 / ,5 1,0 0, , ,6 68 / , ,0 3,1 2,0 1, ,5 3,4 2,5 2, ,0 3,8 3,0 2, ,0 2,8 2, ,0 3,2 2, ,0 3,5 2, ,4-2,0 0,8 0,8 0, ,0 2,0 1, ,0 2,3 1, ,0 2,5 1, ,0 2,8 2, ,0 3,0 2, ,0 5,2 4,0 3, ,1 2,0 1, ,4 2,5 2, ,8 2,7 2, ,2 3,0 2, ,6 3,5 3, ,0 5,0 3,8 3, ,2-1,3 1,0 0,6 0, ,2-1,3 1,0 0,6 0, ,2-1,3 0,9 0,4 0, ,2-1,3 0,9 0,4 0, ,2-0,8 0,5 0, ,4-3,0 2,3 1,5 0, / ,4-2,5 1,8 1,0 0,6 83 Lenth ø ø ø ø ,4-2,5 1,8 1,0 0, ,4-2, ,4-1,7 1,3 0, / ,3-1,6 1,2 0, ,3-2,0 1,5 0, / ,3-1,6 1,2 0, ,3-1,3 1, ,3-1,6 1, ,3-1,3 1,0 84 / ,3-2,0 1, ,3-1,3 1,0 0,5 84 / ,3-1,3 0,8 84 / ,3-1,6 1, ,3-1,0 0,8 0,5 84 / ,3-0,8 84 / / ,2-1,6 1,0 86 / ,2-1,0 0, / ,2-1, / ,2-1,6 1,2 86 / / ,2-1,6 1,2 0, ,2-1,4 1,0 0,6 90 / ,2-1,7 1,3 0,7 90 / ,3-1,7 1,3 1,0 0,6 90 / ,1-1,3 0,8 90 / ,1-1,7 1,0 90 / ,2-1,5 1,1 0,6 90 / ,1-1,5 0,8 90 / ,2-1,3 0,9 0,5 90 / ,1-1,3 0,8 90 / ,8 1, ,4 1, ,4 1, ,8 1, ,1 1, ,3 1, ,8 2,0 65 SYMBOLS flat jaws with lead catcher electrostatic discharin, dissipative weiht half-round jaws anle electronics lenth round jaws flat and pointed jaws box joint bolted joint smooth rippin surfaces serrated rippin surfaces cross-hatched, knurled rippin surfaces with openin sprin centre cutter cuttin edes with bevel cuttin edes with small bevel cuttin edes with very small bevel cuttin edes without bevel VDE tested, also in conformance to GPSG (Equipment and Product Safety Act) insulated accordin to IEC 60900, usable up to 1000 V AC/1500 V DC insulated accordin to DIN VDE 0680/1, suitable for the application up to 1000 V AC / 1500 V DC conforms to a European directive mechanically tested in accordance with the equipment and product safety act WEEE markin (Waste Electrical and Electronic Equipment Directive) soft wire medium hard wire hard wire piano wire Cu + Al multi-conductor cable, solid and multi-stranded wire rope iron

4 CUTTING EDGES TECHNICAL BASICS CUTTING EDGE SHAPES CONFORMING TO DIN ISO 5742 DIRECTION AND POSITION OF CUTTING EDGES with bevel (outside bevel) End Cuttin Nipper with small bevel (outside bevel) Oblique Cutter with very small bevel (outside bevel) Diaonal Cutter without bevel (outside bevel) Centre Cutter Safety instruction Each tool should only be used for its specified purpose. When usin cuttin pliers: beware of wire ends flyin off. Wear protective oles and - if needed - loves. Be aware of bystanders! Only handles marked with the symbol are insulatin. WIRE CLASSES Material examples Type of wire Tensile strenth N/² kp/² Copper, plastics soft Nail, wire pin medium-hard Wire rope strand, steel wire hard Sprin steel wire piano wire

5 ARTICLE NUMBER STRUCTURE OF ARTICLE NUMBER Basic model e..: Combination Pliers Style e..: straiht Finish e..: head polished, handles black atramentized Lenth e..: HEAD/HANDLES 0 Pliers 1 Head 2 Head black atramentized, head polished polished, handles plastic coated polished, handles with multicomponent rips 3 Pliers chrome plated, handles plastic coated 4 Pliers chrome plated Reistered Trademarks of the companies 5 Pliers chrome plated, handles with multicomponent rips Con-Pearl Duspol esis Kapton, KEVLAR, Teflon Radox Phillips PARAT-WERK Schönenbach GmbH + Co. KG Bennin, Elektrotechnik and Elektronik GmbH & Co. KG Wieland Electric GmbH E. I. du Pont de Nemours and Company HUBER+SUHNER AG Phillips Screw Company 6 Pliers 7 Pliers chrome plated, handles insulated with multi-component rips, VDE-tested DIN EN/IEC chrome plated, handles with dipped insulation, VDE-tested DIN EN/IEC Pozidriv European Industrial Service Ltd. systainer TANOS GmbH MC Multi-Contact AG Solarlok Tyco Electronics

6 CONTENTS COMBINATION PLIERS GRIPPING PLIERS CARPENTERS PINCERS PIPE WRENCHES No. Article P. No. Article P. No. Article P. No. Article P. 01 Combination Pliers 20 Chrome Vanadium 08 Mini Combination Pliers Hih Leverae Combination Pliers Combination Pliers Lineman s Pliers 23 WIRE STRIPPERS + DISMANTLING TOOLS No. Article P. 11 Insulation Strippers Electronics Wire Strippin Shears Electronics Wire Stripper Insulation Strippers 25 with shaped blades Precision Insulation Strippers /50 Self-Adjustin Insulation Strippers KNIPEX MultiStrip Automatic Insulation Stripper Automatic Insulation Stripper for flat cable Mini Strippin Tool Wire Stripper 31 for fibre optics Strippin Tool 32 for fibre optics 13 Electricians Pliers Universal Pliers 33 for STP data cables 14 Diaonal Insulation 33 Strippers Strippin Tweezers for Coated-Wire Insulation Strippers Dismantlin Tools Dismantlin Tools Dismantlin Tools Strippin Tool 36 for coax cables Dismantlin Tool 37 for data cables 16 8 Universal Dismantlin Tools Round Nose Pliers with cuttin 38 ede (Jewellers Pliers) 20 Flat Nose Pliers Round Nose Pliers Flat Nose Pliers with cuttin edes (precision mechanics pliers) Snipe Nose Side Cuttin 40 Pliers (Radio Pliers) 26 Snipe Nose Side Cuttin 41 Pliers (Stork Beak Pliers) 27 Snipe Nose Pliers with centre cutter (Telephone Pliers) Assembly Pliers Telephone Pliers Grippin Pliers (Needle-Nose Pliers) Lon Nose Pliers Relay Adjustin Pliers Duckbill Pliers Precision Electronics 46 Grippin Pliers 34 Precision Electronics 47 Grippin Pliers ESD 35 Electronics Pliers Electronics Pliers ESD Electronics Mountin Pliers Grippin Pliers Mechanics Pliers 53 GRIP PLIERS No. Article P. 40 Universal Grip Pliers Grip Pliers Weldin Grip Pliers 55 CIRCLIP PLIERS No. Article P. 44 Circlip Pliers for 56 internal circlips 46 Circlip Pliers for 57 external circlips 44 Circlip Pliers for lare 58 internal circlips 45 Special Retainin Rin Pliers 59 for retainin rins on shafts 46 Circlip Pliers for lare 59 external circlips 46 Circlip Pliers for rip rins 59 on shafts 48 Precision Circlip Pliers 60 for internal circlips 49 Precision Circlip Pliers for external circlips Carpenters Pincers Haerhead Style Carpenters Pincers Farriers Pincers (Tear-off Pliers for vehicle bodywork) Unsolin Pincer for horseshoes Potters Pincers 63 CONCRETORS NIPPERS No. Article P Concretors Nippers Hih Leverae Concretors 65 Nippers No. Article P. 61 Bolt End Cuttin Nippers Electronics Oblique Cuttin Nipper Electronics End Cuttin Nippers / ESD Hih Leverae End Cuttin 67 Nippers CUTTING PLIERS 68/ End Cuttin Nippers End Cuttin Nippers for 71 mechanics 70 Diaonal Cutters KNIPEX CoBolt 74 Compact Bolt Cutters Bolt Cutters Concrete Mesh Cutter Diaonal Cutters for plastics Diaonal Cutter for fibre optics Hih Leverae Centre Cutters Hih Leverae Diaonal Cutters Electronics Diaonal Cutters Diaonal Cutters for 83 electromechanics 77 Electronics Diaonal Cutters Electronics Diaonal Cutters 85 ESD 78 Electronic Super Knips Electronic Super Knips ESD Precision Electronics Diaonal 90 Cutters 79 Precision Electronics Diaonal 91 Cutters ESD 81 Pipe Grippin Pliers Cycle Pliers Pipe Wrenches 93 WATER PUMP PLIERS No. Article P. 86 Pliers Wrenches KNIPEX Cobra KNIPEX Cobra XL/XXL KNIPEX SmartGrip KNIPEX Cobra...matic KNIPEX Cobra VDE Multiple Slip Joint Spanner KNIPEX Cobra ES KNIPEX Alliator Water Pump Pliers with 106 tonue and roove joint 90 Mini Water Pump Pliers 106 SPECIAL PLIERS SPECIAL TOOLS No. Article P Pipe Cutter for plastic 108 conduit pipes and hoses Pipe Cutter for composite 108 pipes and protective tubes Pipe Cutter for composite 109 and plastic pipes 90 4 Punch Lock Riveters Sheet Metal Nibbler Notchin Pliers Revolvin Punch Pliers Tile Nibblin Pincer Tile Breakin Pincer Glass Breakin Pincer Glass Nibblin Pincers Flat Nose Grozin Pliers 112 TWEEZERS No. Article P. 92 Precision Tweezers Precision Tweezers insulated Precision Tweezers ESD 117

7 CABLE AND WIRE ROPE SHEARS No. Article P Pipe Cutter for plastic conduit pipes Cutter for ribbon cable Mitre Shears Vinyl Shears Shears for KEVLAR fibres Combination Shears Cable Shears 120/ Cable Shears with twin cuttin ede Cable Shears Cable Cutters (ratchet action) Cable Shears with telescopic handles 126/ Wire Rope Shears Bowden Cable Cutter Wire Rope and ACSR-Cable Cutters 129 No. Article P Crimp Grip Pliers Crimpin Pliers Crimpin Pliers Insertion tool for LSA-Plus 131 and identical KNIPEX MultiCrimp Crimp System Pliers Crimpin Dies Locators Mountin Tool for MC3 connectors Crimpin Pliers for Scotchlok connectors Crimpin Pliers for Western plus Crimpin Pliers, for two-hand operation 137 / Crimpin Pliers short desin Crimpin Pliers Preciforce Four-Mandrel Crimpin Pliers for turned contacts Self-Adjustin Crimpin Pliers for end sleeves 144 / Crimpin Pliers for micro plus Crimpin Pliers for end sleeves 146 / Crimp Assortments Tool Cases for Photovoltaics CRIMPING PLIERS AND -ASSORTMENTS 150 / Cable Connectors 152 INSULATED TOOLS DIN EN/IEC No. Article P. 01/02/ (Hih Leverae) 156/ Combination Pliers 11 Insulation Strippers 157/ Flat Nose Pliers Round Nose Pliers Snipe Nose Side 159/160 Cuttin Pliers 70 Diaonal Cutters Hih Leverae Diaonal Cutters Pliers Wrench insulated KNIPEX Alliator KNIPEX Cobra VDE Precision Tweezers Cable Shears Cable Cutters 168 (ratchet action) 95 7 Wire Rope and ACSR- 168 Cable Cutter Crimpin Pliers 169 for end sleeves 98 0 Open End-/Box Wrenches 170/ Nut Drivers Adjustable Wrench Screwdrivers from Hexaon Sockets 177/ Torque Wrench Cable Knives 180/ Dismantlin Knives Voltae tester Plastic Slip-On Caps Electricians Gloves Insulatin Mats 183 from rubber Puk Junior Hacksaw Tool Cases from 183 CONTROL CABINET KEYS Control Cabinet Keys Profi-Key Universal Key Pen-Style Control Cabinet Key 189/ Pen-Style Profi-Key 189 No. Article P. TOOL KITS Counter Displays Cobra rane 192 in sales display Tool Roll Circlip Pliers Sets / Pliers Sets in a foam tray from Pliers Sets from Tool Cases from 196 TOOL BAGS AND TOOL CASES No. Article P Tool Pouches Tool Bas and Tool Cases SALES AIDS No. Article P Test Supports Sales Display Rotary Sales Stand Tool Bars (Peboards) Show-Cabinets for product presentation Hooks for peboards Brochure Holder Pliers Racks Sales Displays 214 THE RANGE OF PRODUCTS from 203 No. Article P Precision Insulation Strippers ELECTRONICS PLIERS No. Article P Electronics Wire Stripper Precision Electronics 46 Grippin Pliers 35 Electronics Pliers Electronics Pliers ESD Electronics Mountin Pliers 62 Electronics Oblique Cuttin Nipper 64 Electronics End Cuttin Nippers 64 Electronics End-Cuttin Nippers ESD Electronics Diaonal Cutters Diaonal Cutters for 83 electromechanics 77 Electronics Diaonal 84 Cutters 77 Electronics Diaonal Cutters ESD Electronic Super Knips / ESD 79 Precision Electronics Diaonal Cutters / ESD Crimp System Pliers TOOLS FOR PHOTOVOLTAICS Mountin Tool for MC3 connectors Tool Cases for Photovoltaics / / / Precision Tweezers from Cutter for ribbon cable Electronics Pliers Sets 195

8 4

9 HOW EVERYTHING BEGAN AND A SIMPLE PRINCIPLE 1882 Carl Gustav Putsch set up his own small fore shop in Cronenber (now a part of Wuppertal) Carl Putsch takes over manaement. The company develops into an industrial firm KNIPEX, the brand, is created and reistered Karl Putsch (photo left), the randson of the company founder, takes over manaement of the family-owned company. Numerous innovations and modern production technoloy characterise the development Ralf Putsch joins the com pany. International sales are seriously expanded. Other tool manufacturers become part of the KNIPEX Group. Carl Gustav Putsch wanted to stand on his own two feet after completin his apprenticeship as blacksmith with his father. He therefore set up his own business in 1882 and fored carpenters and farriers pincers with two journeymen, 60 pieces per day. The other processes were also carried out in careful manual labour. The quality was souht after, the small enterprise rew. The next enerations were able to build continuously on these foundations. We have retained an independent family-owned company up to the present day. A lot has chaned since the first years. Over time, the workshop turned into a factory with modern machinery and continuously improvin technoloy. New types of pliers and pioneerin innovations were added. The number of supplied countries rew steadily. However, our fundamental principle has stayed in place: remain faithful to a product roup, concentrate all strenths on it and be simply the best in pliers. Don t et side-tracked, instead create more performance and quality in a sinle sement. This is what KNIPEX stands for as today s leadin brand in pliers. 5

10 FOR WHOM WE MAKE PLIERS They are constantly in our mind: People who work with tools professionally. Who need to be able to rely on their tools, even when the oin ets touh. Who expect their tools to last a lon time. In other words: Users who are demandin in every respect and who want only the best. We offer these users a rane of around 1,000 different pliers. With this choice we can provide exactly the riht tool for every application - and always in a suitable desin and size. Because the verdict of the professionals is our benchmark, we are always lookin for their feedback. About how they work with their pliers and what s important to them, so that we can understand precisely and in detail what matters to them. Paramount is to know what makes their work easier, quicker and safer. That is, the subject of ero nomics, adaptin workin appliances to their users. Despite hih performance, tools should never stress a user more than necessary. Here, for example, the ood desin of pliers handles is not the only criterion. We always find new ways of savin strenth and relievin the whole hand-arm system. 6

11 7

12 8

13 QUALITY IN EVERY DETAIL Sometimes we ive our pliers a really hard time. We try to destroy them to find out what makes them ood and lon-lastin. Because we don t want to leave anythin to chance, we take a lon, careful look. Many trials, for example, have shown us that hih-leverae diaonal cutters for very hard wire should be alloyed at best with 0.8 % carbon and certain defined parts of chromium and vanadium. Correctly hardened, this steel uarantees optimum cuttin performance and service life. That s why we use it for our pliers even if it has to be produced especially for us, costs more and is hard to process. But our hih product demands require this. The rivet of the hih-leverae diaonal cutter also has to stand up to a lot of stress. That s why we literally ive it backup: we fore it straiht onto the pliers. This means extra effort we have to precision mill the rivet to a few hundredth millimeters. Satisfied users are worth this effort. And then there are, no less important: the anles, the sharpness, the hardness, the touhness of the cuttin edes. The precision and smooth movement of the joint. The handle desin and the finish: we keep reviewin these subjects, we research, test and improve. 9

14 MADE IN WUPPERTAL, GERMANY A lot has to come toether so that we can make the best pliers. First of all, the special material. Then: modern processin methods and machines. We want to work with hih precision and efficiently at all times. The machines we require for our special needs are not always available on the market. Then we construct these ourselves. Our mechanical enineers come up with state-of-the-art solutions even for tricky tasks. And last but not least: our employees. With their comprehensive experience, their knowlede and skills they make sure that everythin turns out precisely as our customers expect. So that we can keep the KNIPEX promise. Our pliers run throuh many production steps which are all carefully coordinated. From forin to machinin, hardenin, surface finishin and all the way to packin, these steps are all carried out under the one roof. This means that we can have a direct and complete influence on how our products are created. The short distances allow us to respond quickly and implement improvements iediately. 10

15 11

16 12

17 THE THINK TANK When we have achieved somethin we are happy but we don t stop there. For us, better is the enemy of the ood. And we like to be the first to have the ood ideas for better pliers. We continuously work on new products and product advantaes which offer our users tanible added value. For example by savin handforce when cuttin or they can adjust pliers for rippin quicker and with more precision. Or they can do without a heavy tool because a more compact one can do the same job. No matter whether it s a small improvement or a totally new idea: everythin is meticulously thouht out and desined with state-of-the-art software. New models are then put throuh the acid test with the help of computer simulations in the test lab and in user testin. The results are then used to further optimise the product, it is re-tested and finally released for production. By the time they re on the market our pliers have already come a lon, hard way. 13

18 OUR CUSTOMERS Reliably, confidently and lon-term this is how we wish to collaborate with our customers. We have been doin precisely this for decades with many of them. We offer hih quality, performance, ood service and contact partners who know what it s all about. We want workin with us to be easy and pleasant. Our brand is known and appreciated by consumers. We offer various support for the sale of our products. We visit users toether with our distributors to present our tools. We train our partners field salesforce because a lot can be said about our pliers which the salesperson can use as convincin aruments. Our understandin of partnership also means that we do not sell directly to end users. And there are no exceptions. Today, customers in more than 100 countries bank on our products. We reach them via a con stantly enlarin, worldwide network of aencies, our own subsidiaries and importers. By ob servin the many markets we can ain insihts and discover important trends, which will be beneficial to the up-to-dateness and competence of our rane. Our customers also benefit from this. 14

19 PINZE ALICATES )2* 6=&=<3&( ZANGE PLIERS ዐኞ 7 1*(5 TANG ALICATE./(Ģ7Ü KERPETEN./,-(Ģ7$ PINCES 杂 TENGER 15

20 16

21 OUR VALUES OUR EMPLOYEES We want to be successful and do a lot to achieve this. But we don t want economic success at any price and not at the expense of values which are important to us. Our aspirations are to act and operate sustainably. The lonevity of our products is only one aspect of many. We feel closely linked with our location. That is why we are particularly aware that we have a responsibility towards our environment and society and thereby our future enerations. We want to treat resources carefully and not burden nature more than absolutely necessary. We enae ourselves in many ways in our sphere, in particular in the sectors of education, social policy and culture. Our employees are particularly important to us. They provide the basis for our success with their knowlede and skills, their coitment and ideas. We train them very thorouhly and support them when they want to develop themselves and learn somethin new. We put emphasis on a ood an fair cooperation and know that we can only attain our hih tarets jointly. 17

22 SPECIAL TOOLS FOR PHOTOVOLTAICS ALL WORK STEPS WELL CO-ORDINATED FOR BEST RESULTS There is a steadily increase of electrical power produced by photovoltaic plants (PV systems). The output from this environmentally friendly source of enery rises each year by about 20 % world wide. However, the share in the total power eneration is still below 0.3 % worldwide, which means there is still rich potential for rowth. This makes photo voltaic a profitable sphere of activities for trade and for electrical contractors. The photovoltaic tools from KNIPEX, customized for cuttin, strippin and crimpin the special photovoltaic cables and connectors, offer professional and reliable work results and ensure that the relevant requirements, such as e.. Ral GZ 966, are met. The requirements for a technically perfect installation of the photo voltaic systems are very hih. It is a demandin task to create an electrically efficient and constantly reliable connection in combi nation with hih mechanical requirements

23 for contacts from: Tool Case for Photovoltaics Multi-Contact Hirschmann Tyco Wieland and others : all tools required for assembly in one case equipped with crimpin dies for standard solar cable connectors SPECIAL PHOTOVOLTAIC RANGE FROM KNIPEX Cut effected with a Cable Shears: easy, clean cut without any deformation of the cable. Huber + Suhner Multi-Contact MC3 Hih demands in terms of results require the use of hih-quality special tools also. These must be adapted precisely to suit systems from various manufacturers. Multi-Contact MC4 Hirschmann Tyco As the systems are not compatible with each other, each type of connector requires a set of individual crimpin dies. The rane is completed by locators to support quick, easy and precise work. Wieland Locators for an exact connector positionin in the crimp profile 19

24 COMBINATION PLIERS 01 Combination Pliers Chrome Vanadium DIN ISO 5746 IEC DIN EN for heaviest duty with rippin zones for flat and round material, suitable for versatile use with cuttin edes for soft, hard and piano wire lon cuttin edes for thicker cables cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC particularly wear resistant rippin jaws; hardness of the rippin jaws approx. 53 HRC Chrome vanadium heavy-duty steel, fored, oil-hardened Pliers Handles Cuttin capacities Ø Ø Ø ² insulated with multicomponent rips, chrome plated VDE-tested Mini Combination Pliers compact combination pliers for professionals and hobbyists with rippin zones for flat and round material, suitable for versatile use with cuttin edes for soft and hard wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC Vanadium electric steel; fored, oil-hardened Cuttin capacities Pliers Handles Ø Ø Ø ² chrome plated rips

25 COMBINATION PLIERS 02 Hih Leverae Combination Pliers DIN ISO Easier cuttin. Powerful rippin, bendin and pullin. 35 % less effort required than with conventional combination pliers easier work due to optimised leverae with cuttin edes (hardness approx. 63 HRC) for soft and hard wire and piano wire lon cuttin edes for thicker cables with rippin zones for flat and round material, suitable for versatile use Hih-rade special tool steel, fored, oil-hardened Pliers Head Handles Cuttin capacities Ø Ø Ø ² black atramentized polished plastic coated black atramentized polished rips chrome plated rips insulated with chrome plated multi-component rips, VDE-tested with plastic dipped chrome plated insulation, VDE-tested

26 COMBINATION PLIERS 03 Combination Pliers DIN ISO 5746 with rippin zones for flat and round material, suitable for versatile use with cuttin edes for soft and hard wire lon cuttin edes for thicker cables cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC Special tool steel, fored, oil-hardened Pliers Head Handles Cuttin capacities Ø Ø Ø ² black atramentized polished black atramentized polished plastic coated rips black atramentized polished rips chrome plated insulated with multi-component rips, chrome plated VDE-tested with plastic dipped insulation, chrome plated VDE-tested

27 COMBINATION PLIERS 09 Lineman s Pliers American style DIN ISO 5746 ASME B solid construction for heaviest strain; universally applicable hih transmission ratio for easy cuttin requires 40 % less effort compared with conventional combination pliers thanks to optimised transmission ratio eronomically optimised handle shape for firm contact to the hand and fatiue reducin operation particularly effective cross-hatched knurled rippin zone in the jaws for stron rippin and pullin additional rippin zone below the joint for powerful leverae and pressin performance with cuttin edes for soft and hard wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC Vanadium electric steel; fored, oil-hardened / with fish tape puller in the joint ap; with universal mandrel crimpin point below the joint Cross-hatched, knurled rippin zone for firm rippin and pullin, e.. for fence construction Grippin zone below the joint for powerful leverae Lon cuttin edes for cuttin flat cables 09 11/12 240: fish tape puller in the joint ap 09 11/12 240: universal mandrel crimpin area below the joint Pliers Head Handles Cuttin capacities Ø Ø black atramentized polished with non-slip plastic coatin black atramentized polished rips black atramentized polished with non-slip plastic coatin black atramentized polished rips

28 WIRE STRIPPERS AND DISMANTLING TOOLS 11 Insulation Strippers for sinle, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 dia. or resp ² cable cross section easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut Special tool steel, fored, oil-hardened Prismatic blade: The red area is cut over four surfaces. Works with hihly-elastic materials also Strippin capacities Pliers Head Handles Ø ² AWG black atramentized black atramentized polished plastic coated polished rips chrome plated rips chrome plated chrome plated black atramentized insulated rips, VDE-tested with plastic dipped insulation, VDEtested polished rips chrome plated rips chrome plated with plastic dipped insulation, VDEtested

29 WIRE STRIPPERS AND DISMANTLING TOOLS 11 8 Electronics Wire Strippin Shears for cuttin and strippin sinle, multiple and fine-stranded conductors with diameters up to 1.0 easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut with openin sprin Special tool steel, oil-hardened Head Handles Strippin capacities Ø polished rips Electronics Wire Stripper for sinle, multiple and fine stranded cables havin a diameter from 0.1 up to 0.8, with plastic or rubber insulation easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut with openin sprin the mirror polish toether with a fine film of oil offer effective rust protection - no circuit faults caused by peelin chrome from plated tools Special tool steel, fored, oil-hardened Head Handles Strippin capacities Ø mirror polished rips Insulation Strippers with shaped blades with replaceable blades for 4 or 6 different conductor cross-sections leave wire undamaed thanks to precision-round blade shapes, even multi-stranded conductors are stripped ently durin strippin, the wire is held firmly by clampin jaws with lenth stop for constant strippin lenth durin repetitive work a sprin leads the stripper back to the startin position Pliers body: aluminium Blade: special tool steel, oil-hardened : wire diameter in : wire cross-sections in ² Pliers Handles Strippin capacities Strippin capacities AWG Ø ² 0.5 / 1.2 / 1.6 / black lacquered with plastic rips / 1.0 / 1.5 / / 17 /15 / 2.5 / 4.0 / /11/ pair of spare blades for pair of spare blades for

30 WIRE STRIPPERS AND DISMANTLING TOOLS Precision Insulation Strippers with adapted blades Precisely and reliably Two pairs of blades (1) cut the insulation to a complete extent. Then the blade pairs move apart, and thus the insulation is removed form-fit (2). The pliers open automatically after the strippin procedure form-fit strippin also of difficult-to-remove insulatin materials such as Teflon, silicone, Radox, Kapton and rubber; multi-layer too a second pair of blades holds the remainin insulation reliably in place blades are shaped precisely to the respective conductor cross-section with an adjustable lenth stop when cuttin the same strippin lenths durin repetitive work Pliers body: steel Blade: special tool steel, oil-hardened with additional cable uide for exact positionin of the cable in the strippin area of the blade / for solar cables specially adapted to multi-layered and Radox insulation; with additional cable support for a better centrin of multi-layer insulated conductors in the strippin profiles maximum cable cross-section (in ²) per profile: Pliers Handles Strippin capacities AWG ² burnished rips burnished rips set of spare blades for set of spare blades for set of spare blades for set of spare blades for set of spare blades for

31 WIRE STRIPPERS AND DISMANTLING TOOLS Principle of operation with adapted blades Properly and precise strippin with an annular cut throuh the complete insulation. This is particularly important with conductors, which must be stripped precisely. This works without any problem even with difficult materials such as Teflon, Radox and multilayer insulations with cable uide and lenth stop Precise cuttin of the insulation to a complete extent Positive strippin thanks to precise shape of the blades Automatic strippin of the insulation

32 WIRE STRIPPERS AND DISMANTLING TOOLS 12 40/50 Self-Adjustin Insulation Strippers for sinle, multiple and fine stranded conductors with plastic or rubber insulation adapts automatically to the respective cable cross-section; prevents damae to the conductor cuttin depth can be adjusted for different insulation materials with wire cutter for copper and aluminium wires, multiple stranded up to 10.0 ² and sinle stranded up to 6.0 ² smoothly operatin mechanism strippin blades and clampin jaws easily replaceable low weiht Body: plastic, fibrelass-reinforced Blade: special tool steel, oil-hardened for thin ribbon cables up to 10.0 width in a sinle pass STRAIGHT BLADE Wire cutter for multiple stranded wire cables up to ² Adjustable lenth stop Precise strippin prevents damae to the conductor Strippin capacities AWG Lenth stop ² pair of spare blades for pair of spare clampin jaws for Spare lenth stop for pair of spare blades for pair of spare clampin jaws for

33 WIRE STRIPPERS AND DISMANTLING TOOLS KNIPEX MultiStrip 10 Automatic Insulation Stripper Patented mechanics The incision depth of the strippin blade adjusts fully automatically to the diameter of the wire and accordinly also to the thickness of all standard insulatin materials. There is no need for any manual adjustment which is still necessary when other conventional pliers with a wide wire-strippin rane are used Mode of operation of straiht cutters Models and An incision is made in the red area only. Not suitable for hihly-flexible or armoured insulation materials or for multi-layered insulation. Strippin without re-adjustment from 0.03 to 10.0 ² fully automatic adjustment to coercially used sinle-, multi- and fine-stranded conductors with standard insulation throuhout the entire capacity rane from 0.03 to 10.0 ² no manual fine adjustment required, no damae to the conductors the clampin jaws made of steel with interated cuttin ede hold the cable in a way that prevents slippin without damain the remainin insulation with wire cutter for copper and aluminium conductors, multistranded up to 10.0 ² and sinle-stranded up to 6.0 ² particularly smooth-runnin mechanics and very low weiht replaceable blades block and lenth stop handle with soft-plastic zone for a steady rip Body: plastic, fibrelass-reinforced Blade: special tool steel, oil-hardened Wire cutter for multiple stranded wire cables up to 10.0 ² Steel restrain jaws with cuttin edes avoid skiddin of the cable Precise strippin from 0.03 to 10.0 ² without re-adjustment Strippin capacities AWG ² Spare blades block for Spare lenth stop for

34 WIRE STRIPPERS AND DISMANTLING TOOLS Automatic Insulation Stripper compact standard tool at a favourable price for all current cable cross-sections and insulatin materials for sinle, multiple and fine stranded cables of 0.2 up to 6.0 ² with standard insulation adapts automatically to the respective cable cross-section; prevents damae to the conductor hih operation comfort thanks to handy shape and low weiht narrow head style for use in confined areas with wire cutter for copper an aluminium wires up to 2.5 ² with adjustable lenth stop from for cuttin the same strippin lenths durin repetitive work Body: plastic, fibrelass-reinforced Blades: special tool steel, oil-hardened, interchaneable Wire cutter up to 2.5 ² Precise strippin from 0.2 up to 6.0 ² Strippin in confined areas Strippin capacities ² AWG pair of spare blades for Spare lenth stop for Automatic Insulation Stripper for flat cable for PVC insulated flat cables up to a max. 12 width and 0.75 to 2.5 ² adapts automatically to the various conductor heihts; prevents damae to the conductor lon strippin lenths possible blade replaceable smoothly operatin mechanism low weiht Body: plastic, fibrelass-reinforced Blade: special tool steel, oil-hardened Strippin capacities ² AWG pair of spare blades for

35 WIRE STRIPPERS AND DISMANTLING TOOLS Mini Strippin Tool precise strippin, stepwise adjustment to the conductor diameters with wire cutter adjustable lenth stop from with lockin device Housin: plastic, impact-proof SB for thin copper conductors dia to SB Strippin capacities AWG Ø SB SB Wire Stripper for fibre optics to remove primary and secondary coatin of fibre optics Chrome vanadium electric steel in special quality, oil-hardened SB Pliers Handles Strippin capacities Ø SB burnished with plastic handles primary-coatin: secondary-coatin:

36 WIRE STRIPPERS AND DISMANTLING TOOLS Strippin Tool for fibre optics to remove primary coatin of fibre optics Ø blade dia. 0.18, hole for cable feedin 0.30 dia. adjustable lenth stop Housin: plastic, impact-proof SB Strippin capacities Ø SB to remove primary coatin of fibre optics Ø Electricians Pliers the ideal pliers for cable work for rippin and bendin wire for cuttin soft, medium and hard wire precision cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC with precision strippin holes for crimpin end sleeves (ferrules) Vanadium electric steel; fored, oil-hardened Grippin Cuttin Strippin Crimpin 0.5 to 2.5 ² Pliers Head Handles Strippin capacities ² Cuttin capacities Ø Ø black atramentized polished plastic coated / 1.5 / black atramentized polished chrome plated rips rips / 1.5 / / 1.5 /

37 WIRE STRIPPERS AND DISMANTLING TOOLS Universal Pliers for STP data cables for cuttin the entire cable, the sinle conductor, the shield and the plastic core steel needle at the joint for lonitudinal scratchin of the shield foil prismatic blades below the joint for dismantlin the cables Chrome vanadium electric steel in special quality, oil-hardened SB Pliers SB burnished rips 102 Handles 14 Diaonal Insulation Strippers the essential pliers for electrical installation work precision strippin holes for sinle (solid) conductors of 1.5 and 2.5 ² induction hardened precision blades for soft wire up to 4.0 dia., cuttin ede hardness approx. 60 HRC Vanadium electric steel; fored, oil-hardened Multi-functional: cuttin and strippin Pliers Head Handles Strippin capacities ² AWG Cuttin capacities Ø Ø black atramentized polished rips chrome plated chrome plated rips insulated with multi-component rips, VDE-tested

38 WIRE STRIPPERS AND DISMANTLING TOOLS Strippin Tweezers for Coated-Wire for strippin off varnished insulation on copper wires blades for other wire diameters available as spare parts Tweezers body: sprin steel, oil-hardened Handle shells: plastic Artikel-Nr. Strippin capacities Ø pair of spare blades for Ø pair of spare blades for Ø pair of spare blades for Ø pair of spare blades for Ø Insulation Strippers for strippin thin cables accurate borin to match diameter of wire, precise strippin prism; non-adjustable with openin sprin Chrome vanadium electric steel, fored, oil-hardened Head Handles Strippin capacities Ø polished plastic coated Dismantlin Tools SB for strippin all coon round cables self-tihtenin holdin lever with adjustin screw for cuttin depth adjustment turnable blade for circular and lonitudinal cuttin spare blade inside the handle secure rip due to soft component material on handle and holdin lever to avoid slippin Housin: plastic, impact-proof SB SB with knife and hook blade, protective cap included Strippin capacities Ø SB SB SB Spare blade for SB / SB / SB 34

39 WIRE STRIPPERS AND DISMANTLING TOOLS Dismantlin Tool for dismantlin round cable sheaths made of PVC, rubber, silicone or PTFE from dia. self-tihtenin holdin lever with knurled nut for cuttin depth adjustment chanin from circular to SB lonitudinal cuttin by turnin the tool body spiral cuttin for removin intermediate pieces replaceable blade Housin: plastic, impact-proof Strippin capacities Ø SB Spare blade for SB Dismantlin Tool for dismantlin round cables exceedin 25.0 dia. removes all kinds of insulation layers suitable for lonitudinal and circular cuttin cuttin depth can be adjusted up to 5.0 replaceable blade (both sides can be used) Tool body: plastic, fibrelass-reinforced Adjustable cuttin depth Settin the tool for lonitudinal cut Lonitudinal cut Strippin capacities Ø > Spare blade for Turnin the tool for circumferential cut Circular cut 35

40 WIRE STRIPPERS AND DISMANTLING TOOLS Strippin Tool for coax cables for strippin coax cables (RG 58, RG 59 and RG 62) for strippin outer sheath, shield and insulation in a sinle pass with three built-in blades the cuttin depth of each blade can be adjusted individually by means of a hexaonal key (Allen key) the blade spacin remains constant Housin: plastic, impact-proof SB Dismantlin of a coax-cable in three steps 3 strippin steps in one operation Cable type SB RG 58, RG 59 and RG Strippin Tool for coax cables for dismantlin and strippin all coon coax cables between dia. (e.. for TV- and satellite antenna), also suitable for PVC round cable 3 x 0.75 ² with lenth scale double shell, foldin back strippin tool with openin sprin and lockin device Body: plastic, fibrelass-reinforced SB Strippin capacities Ø SB Coax-cables round cables 3 x 0.75 ² 39 36

41 WIRE STRIPPERS AND DISMANTLING TOOLS Dismantlin Tool for data cables for strippin UTP and STP data cables with diameters of 4.5 to 10.0 strippin device for cross-sections 0.2 / 0.3 / 0.8 / 1.5 / 2.5 / 4.0 ² double shell, foldin back strippin tool with openin sprin and lockin device practical clip for easy transport Body: plastic, fibrelass-reinforced SB Types of cables Strippin capacities Ø Strippin capacities ² SB CAT 5, CAT 6, CAT 7, Twisted-Pair (UTP/STP) Universal Dismantlin Tools for dismantlin and strippin all coon round and damp-proof installation cables between dia. (e.. 3 x 1.5 ² up to 5 x 2.5 ²) also for use in conduit and distribution boxes double shell, foldin back strippin tool with openin sprin and lockin device practical clip for easy transport Body: plastic, fibrelass-reinforced SB SB with additional blade for lonitudinal cuts; telescopic blade inside; strippin device for cross-sections 0.2 / 0.3 / 0.8 / 1.5 / 2.5 / 4.0 ² SB Strippin capacities Types of cables Ø SB round cable, e..: 3 x 1.5 ² up to 5 x 2.5 ² SB round cable, e..: 3 x 1.5 ² up to 5 x 2.5 ² 67 37

42 GRIPPING PLIERS 19 Round Nose Pliers with cuttin ede (Jewellers Pliers) DIN ISO for rippin and manipulatin fine wires, e.. in jewellery work ideal for cuttin and bendin activities, also in electronics for bendin wire loops precision-round round jaws with fine, pointed tips cuttin edes additionally induction hardened, cuttin ede hardness approx. ca. 60 HRC Vanadium electric steel; fored, oil-hardened Pliers Head Handles D1 black atramentized L3 Dimensions T1 W3 Cuttin capacities W4 Ø Ø polished plastic coated chrome plated plastic coated Flat Nose Pliers DIN ISO 5745 flat, short, wide jaws knurled rippin surfaces Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles L3 Dimensions W black atramentized polished plastic coated T black atramentized polished rips chrome plated rips chrome plated insulated rips, VDE-tested

43 GRIPPING PLIERS 22 Round Nose Pliers DIN ISO 5745 for bendin wire loops round, short jaws; finely round Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles L3 Dimensions W3 D black atramentized polished plastic coated T black atramentized polished rips chrome plated rips chrome plated chrome plated insulated rips, VDE-tested with plastic dipped insulation, VDE-tested Flat Nose Pliers with cuttin edes (precision mechanics pliers) DIN ISO 5745 suitable for rippin and cuttin work in fine mechanics flat, lon jaws, taperin cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC Hih-rade special tool steel, fored, oil-hardened Head Handles Cuttin capacities Ø Ø T1 L3 Dimensions W3 W4 T polished plastic coated

44 GRIPPING PLIERS 25 Snipe Nose Side Cuttin Pliers (Radio Pliers) DIN ISO 5745 suitable for finer rippin and cuttin work pointed, half-round jaws knurled rippin surfaces with cuttin edes for soft, medium-hard and hard wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 61 HRC Vanadium electric steel; fored, oil-hardened Cuttin capacities Dimensions Pliers Head Handles L3 L4 W3 T1 W4 T2 Ø Ø black polished plastic coated atramentized with multicomponent black polished atramentized rips chrome plated plastic coated with multicomponent chrome plated rips insulated with chrome plated multi-component rips, VDE-tested black atramentized polished plastic coated chrome plated chrome plated with multicomponent rips insulated with multi-component rips, VDE-tested

45 GRIPPING PLIERS 26 Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) DIN ISO 5745 Elastic tips: dimensionally stable even when twisted distortion-tolerant, elastic precision tips half-round, lon, pointed jaws with cuttin edes (hardness approx. 61 HRC) for soft, medium-hard and hard wire Vanadium electric steel; fored, oil-hardened Pliers Head Handles black atramentized black atramentized Cuttin capacities Ø Ø L3 L4 Dimensions T1 W3 W4 T2 polished plastic coated polished rips chrome plated plastic coated chrome plated chrome plated chrome plated black atramentized black atramentized rips insulated with multi-component rips, VDE-tested with plastic dipped insulation, VDE-tested polished plastic coated polished rips chrome plated plastic coated chrome plated chrome plated chrome plated 40 rips insulated with multi-component rips, VDE-tested with plastic dipped insulation, VDE-tested

46 GRIPPING PLIERS 27 Snipe Nose Pliers with centre cutter (Telephone Pliers) DIN ISO 5743 for rippin and separatin of sinle wires in harnesses with centre cutter for soft wire half-round jaws knurled rippin surfaces Chrome vanadium electric steel, fored, oil-hardened Head Handles L3 W3 Dimensions T1 W4 T polished plastic coated Assembly Pliers DIN ISO 5743 specially suitable for rippin and assembly work with a hiher prehensile power knurled rippin surfaces Hih-rade special tool steel, fored, oil-hardened Pliers Head Handles L3 W3 Dimensions T1 W4 T black atramentized polished plastic coated black atramentized polished plastic coated

47 GRIPPING PLIERS 29 Telephone Pliers DIN ISO 5745 rippin surfaces cross-hatched, knurled Chrome vanadium electric steel, fored, oil-hardened Style 2 extra slim, fine tips; also suitable for solderin work Style Pliers Head Handles L3 W3 Dimensions T1 W4 T black atramentized polished plastic coated black atramentized polished plastic coated chrome plated rips Grippin Pliers (Needle-Nose Pliers) DIN ISO 5743 precision pliers for very exact assembly, bendin and adjustin work with extra lon jaws: lenth of jaws 55.0 smooth round rippin surfaces edes carefully deburred Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles L3 L4 Dimensions W3 T1 W4 T black atramentized polished plastic coated chrome plated rips black atramentized polished plastic coated chrome plated rips

48 GRIPPING PLIERS 30 Lon Nose Pliers DIN ISO 5745 heavy-duty and hard-wearin rippin pliers different jaw styles Chrome vanadium electric steel, fored, oil-hardened Style 1 lon, trapezoidal jaws; knurled rippin surfaces Style 2 lon, half-round jaws; knurled rippin surfaces Style 3 lon, round jaws; smooth rippin surfaces Dimensions Style Pliers Head Handles L3 W3 T1 W4 T black atramentized polished plastic coated chrome plated plastic coated chrome plated rips insulated with multicomponent chrome plated rips, VDE-tested black atramentized polished plastic coated chrome plated plastic coated chrome plated rips black atramentized polished plastic coated chrome plated plastic coated chrome plated rips insulated with multicomponent chrome plated rips, VDE-tested

49 GRIPPING PLIERS Haloen Bulb Exchane Pliers for the installation of wede base bulbs rippin surfaces plastic coated Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles black atramentized polished plastic coated Relay Adjustin Pliers DIN for rippin components and wires of the smallest diameters and for bendin contact and relay sprins polished rippin surfaces edes carefully deburred Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles L3 W3 Dimensions T black atramentized polished plastic coated black atramentized polished plastic coated chrome plated plastic coated black atramentized polished plastic coated W4 T2 33 Duckbill Pliers DIN ISO 5743 duckbill shaped jaws 9 wide at the tip and taperin to 1.5 thickness smooth rippin surfaces Chrome vanadium electric steel, fored, oil-hardened Pliers Head Handles L3 W3 Dimensions T1 W4 T black atramentized polished plastic coated chrome plated plastic coated

50 GRIPPING PLIERS 34 Precision Electronics Grippin Pliers DIN ISO 9655 The subtle difference KNIPEX precision electronics pliers are made of hih-quality ball bearin steel and processed with the hihest deree of care. Each openin movement is entle and even without backlash. Each work step proceeds reliably and precisely. This makes work much easier for professionals for very precise assembly work, e.. in electronics and fine mechanics for rippin, holdin and bendin smoothly round rippin surfaces, edes finely rounded approx. 20 % lihter than conventional electronics pliers bolted joint and carefully manufactured joint surfaces for even, low-friction movement throuhout the entire openin rane smooth-runnin double sprin for a entle and even openin eronomically optimised multi-component handles fored from chrome vanadium ball-bearin steel Style 1 flat, wide jaws Style 2 half-round jaws Style 3 round, pointed jaws Pliers Sets, see pae 197 Style Pliers Head Handles B burnished polished rips A Dimensions D E F burnished polished burnished polished rips rips

51 GRIPPING PLIERS 34 Precision Electronics Grippin Pliers ESD DIN ISO 9655 ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method ESD for very precise assembly work, e.. in electronics and fine mechanics for rippin, holdin and bendin electrically discharin handles dissipative smoothly round rippin surfaces, edes finely rounded approx. 20 % lihter than conventional electronics pliers bolted joint and carefully manufactured joint surfaces for even, lowfriction movement throuhout the entire openin rane smooth-runnin double sprin for a entle and even openin eronomically optimised multi-component handles fored from chrome vanadium ball-bearin steel ESD Style 1 flat, wide jaws Style 2 half-round jaws Style 3 round, pointed jaws ESD Pliers Sets, see pae ESD burnished polished Style Pliers Head Handles B rips A Dimensions D E F ESD burnished polished ESD burnished polished rips rips

52 GRIPPING PLIERS 35 Electronics Pliers DIN ISO precision pliers for fine assembly work, e.. in electronics and fine mechanics for rippin, holdin and bendin sturdy, zero backlash box joint smooth round rippin surfaces edes carefully deburred low-friction double sprin for entle and even openin the polish or mirror polish (only finish 2) toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools Special tool steel, fored, oil-hardened Pliers Sets, see pae Head Handles B A Dimensions D polished plastic coated mirror polished rips polished plastic coated mirror polished rips polished plastic coated mirror polished rips mirror polished rips mirror polished rips mirror polished rips mirror polished rips mirror polished rips E F 48

53 GRIPPING PLIERS 35 Electronics Pliers ESD DIN ISO ESD ESD ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method 2472 precision pliers for fine assembly work, e.. in electronics and fine mechanics for rippin, holdin and bendin electrically discharin handles dissipative sturdy, zero backlash box joint smooth round rippin surfaces edes carefully deburred low-friction double sprin for entle and even openin the mirror polish toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools with two-colour dual component handles, black/rey Special tool steel, fored, oil-hardened Pliers Sets, see pae ESD ESD 45 Head Handles B A Dimensions D ESD mirror polished rips ESD mirror polished rips ESD mirror polished rips ESD mirror polished rips E F 49

54 GRIPPING PLIERS 36 Electronics Mountin Pliers DIN ISO to bend wire in shape for the distance to the board precision pliers for very fine assembly and repair work in electronics for bendin and cuttin off wire ends on components sturdy, zero backlash box joint smooth round rippin surfaces edes carefully deburred low-friction double sprin for entle and even openin the mirror polish toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools Hih-rade special tool steel, fored, oil-hardened to bend and cut wire at 1.6 lenth below the board to crunch and cut wire at 1.6 lenth below the board Head Handles Cuttin capacities Ø L3 W Dimensions T1 W1 T mirror polished rips mirror polished rips mirror polished rips

55 GRIPPING PLIERS 37 Grippin Pliers for precision mechanics DIN ISO 9655 precision pliers for fine assembly work, e.. in electronics and fine mechanics for rippin, holdin, bendin and adjustin tips precision round smooth rippin surfaces edes carefully deburred lap joint Chrome vanadium electric steel, fored, oil-hardened Style 1 flat, wide jaws Style 2 flat, concave and pointed jaws Style 3 half-round jaws Style 4 round, pointed jaws to bend wire loops Style Pliers Head Handles B A Dimensions D E F black atramentized polished plastic coated chrome plated plastic coated black atramentized polished plastic coated chrome plated plastic coated black atramentized polished plastic coated chrome plated plastic coated black atramentized polished plastic coated chrome plated plastic coated

56 52

57 GRIPPING PLIERS 38 Mechanics Pliers DIN ISO 5745 hih bendin strenth of the pliers jaws/tips rippin surfaces cross-hatched, knurled Vanadium electric steel; fored, oil-hardened Style 7 70 anled, half-round jaws, suitable for pullin split pins; for rippin at points that are difficult to access. Style 9 45 anled, half-round, lon jaws, also suitable for rippin spark plus and round components (spark plu cover rabber ) Style Pliers Head Handles L3 W3 Dimensions T1 W4 T black atramentized polished plastic coated chrome plated rips black atramentized polished plastic coated chrome plated rips black atramentized polished plastic coated chrome plated rips black atramentized polished plastic coated chrome plated rips black atramentized polished plastic coated black atramentized polished plastic coated chrome plated rips

58 GRIP PLIERS 40 Universal Grip Pliers hold round, profile and flat material securely heavy duty model with adjustment screw and release lever one-hand operation hih clampin pressure due to tole lever action Pliers body: rolled steel, hih-strenth Grippin jaws: chrome vanadium electric steel, fored Grip Pliers hold round, profile and flat material securely heavy duty model with adjustment screw and release lever one-hand operation hih clampin pressure due to tole lever action Pliers body: rolled steel, hih-strenth Grippin jaws: chrome vanadium electric steel, fored Style 0 jaws for round workpieces, with wire cutter Style 1 jaws with double prism for round, section and flat material Style straiht jaws for flat material Style 3 Lon-Nose Grip Pliers, narrow, lon jaws Style Pliers nickel plated nickel plated nickel plated nickel plated

59 GRIP PLIERS 42 Weldin Grip Pliers for rippin, clampin and holdin of diverse profiles heavy duty model with adjustment screw and release lever one-hand operation hih clampin pressure due to tole lever action Pliers body: rolled steel, hih-strenth heat resistant malleable cast iron jaws; section or flat material items lyin side by side are held in place durin weldin; also for section material with vertical webs up to 25 heiht heat resistant malleable cast iron jaws; round or tubular material items lyin centrally side by side are held securely durin weldin rippin jaws of chrome vanadium steel, drop fored; clamps cumbersome workpieces and sections with hih webs up to 40 Pliers nickel plated nickel plated nickel plated

60 CIRCLIP PLIERS 44 Circlip Pliers to assemble internal circlips into bores for fittin circlips into bores, rane of application from dia. solid style, fored non-slip, solid tips Pliers body and tips: chrome vanadium steel, fored, oil-hardened J2 Style 1 DIN 5256 C, straiht tips Style 2 DIN 5254 B; 90 anled tips J21 90 Style 3 45 anled tips J22 45 Pliers Sets, see pae 193 Style Pliers Head Handles Size of bore Ø J J J black atramentized polished plastic coated J J J J J chrome plated plastic coated J J J J J black atramentized polished plastic coated J J J J chrome plated plastic coated J J J J J black atramentized polished plastic coated J J

61 CIRCLIP PLIERS 46 Circlip Pliers to assemble external circlips on shafts for fittin circlips on shafts, rane of application from dia. solid style, fored non-slip, solid tips Pliers body and tips: chrome vanadium steel, fored, oilhardened A2 Style 1 DIN 5254 A; straiht tips Style 2 DIN 5254 B; 90 anled tips Style 3 45 anled tips A A22 45 Pliers Sets, see pae 193 Style Pliers Head Handles Size of shaft Ø A A A black atramentized polished plastic coated A A A A chrome plated plastic coated A A A A A black atramentized polished plastic coated A A A A chrome plated plastic coated A A A A A black atramentized polished plastic coated A A

62 CIRCLIP PLIERS 44 Circlip Pliers for lare internal circlips for assemblin circlips into bores within the rane of Ø with lockin device, can be released with replaceable tips made of tempered steel black powder coated Pliers body: rolled steel, hih-strenth Tips: special tool steel, oil-hardened Style 1 DIN 5256 C, straiht tips J6 Style 2 DIN 5254 B; 90 anled tips Style Pliers Size of bore Ø J black powder-coated J J black powder-coated J J pair of spare tips for J J pair of spare tips for J J pair of spare tips for J J pair of spare tips for J61 45 Special Retainin Rin Pliers for retainin rins on shafts DIN ISO 5743 for fittin horseshoe-shaped sprin retainin rins and circlips without rip holes for shaft retainin devices with openin sprin Chrome vanadium electric steel, fored, oil-hardened for retainin rins with a minimum rin split ap of anled jaws with centerin hole; for snap rins larer than 12.0 dia., e.. for securin cardan shafts in a motor vehicle; minimum rin split ap of the rins Pliers Handles burnished burnished plastic coated

63 CIRCLIP PLIERS 46 Circlip Pliers for lare external circlips for assemblin circlips on shafts within the rane of Ø with lockin device, can be released with replaceable tips made of tempered steel black powder coated Pliers body: rolled steel, hih-strenth Tips: special tool steel, oil-hardened Style 1 DIN 5254 A; straiht tips A5 Style 2 DIN 5254 B; 90 anled tips Style Pliers Size of shaft Ø A black powder-coated A A black powder-coated A A pair of spare tips for A A pair of spare tips for A A pair of spare tips for A A pair of spare tips for A61 46 Circlip Pliers for rip rins on shafts DIN ISO G0 for fittin rip rins on shafts from dia. with openin sprin solid style, fored non-slip, solid tips Pliers body and tips: chrome vanadium steel, fored, oil-hardened G0 for rins of dia., with adjustable stop screw to prevent overstretchin G2 Pliers Head Handles Size of shaft Ø G black atramentized polished plastic coated G G black atramentized polished plastic coated G G

64 CIRCLIP PLIERS 48 Precision Circlip Pliers to assemble internal circlips into bores J2 Tiptop quality Easy and reliable assembly: form-fittin inserted and pressed-in tips made of hih-density sprin steel offer a hih level added resilience aainst excessive stress and strain, e.. when removin stuck rins. The lare supportin surfaces and the position of the tips make it more difficult for the rins to bounce off J21 90 With inserted tips for reliable work heavy duty in continuous operation: up to 10 times loner service life compared to turned tips joint with screw: precise, zero backlash operation of pliers non-slip plastic coatin on the handles Pliers body: chrome vanadium electric steel, fored, oil-hardened Inserted tips: sprin steel wire, drawn Style 1 DIN 5256 C, straiht tips Style 2 DIN 5256 D; 90 anled tips Pliers Sets, see pae 193 Precision and durability Hih-density sprin steel with a score-free surface is used for the tips. This increases the tips resistance to dynamic and static strain. The tips are 30 % more stable than conventional pliers when subjected to one-off overloadin while still allowin ood accessibility durin assembly. Subjected to dynamic strain, the tips resistance capacity is up to 10 times reater! The tips on the precision circlip pliers are non-detachable! Slim head shape Sturdy, inserted tips: made from hihdensity sprin steel Tiht fit throuh compression Style Pliers Handles Size of bore Tips Ø Ø J J J rey atramentized with non-slip plastic coatin J J J J J rey atramentized with non-slip plastic coatin J J

65 CIRCLIP PLIERS 49 Precision Circlip Pliers to assemble external circlips on shafts A2 Style 1 DIN 5254 A, straiht tips With inserted tips for reliable work heavy duty in continuous operation: up to 10 times loner service life compared to turned tips lare contact faces on the tips: no distortion of circlips, easy fittin joint with screw: precise, zero backlash operation of pliers internal openin sprin, protected and captive non-slip plastic coatin on the handles Pliers body: chrome vanadium electric steel, fored, oil-hardened Inserted tips: sprin steel wire, drawn A0 / Style 3 with additional openin limiter (infinitely adjustable openin width); avoids overstretchin of small external circlips; DIN 5254 A; straiht tips A01 / Style 4 with additional openin limiter (infinitely adjustable openin width); avoids overstretchin of small external circlips; DIN 5254 B; 90 anled tips A21 90 Style 2 DIN 5254 B; 90 anled tips Pliers Sets, see pae 193 Sprin inside the joint: the sprin is protected inside the precisely bolted joint. It does not hinder work and cannot et dirty or lost. Style 3 / style 4: with adjustable openin restriction Bolted joint: hih precision and smooth action KNIPEX Precision Circlip Pliers: fit circlips without distortion; easy and quick assemblin Circlips are held reliably: lare contact areas and the position of the tips make it difficult for the circlip to bounce off Conventional Circlip Pliers: distortion of the circlip when widenin the circlip Style Pliers Handles Size of shaft Tips Ø Ø A A with non-slip plastic A rey atramentized coatin A A A A with non-slip plastic A rey atramentized coatin A A A rey atramentized A rey atramentized with non-slip plastic coatin with non-slip plastic coatin

66 CARPENTERS PINCERS 50 Carpenters Pincers DIN ISO for heaviest duty specially favoured by craftsmen for their precise workmanship extreme wear resistance and well balanced cuttin edes additionally hardened; cuttin ede hardness approx. 60 HRC Special tool steel, fored, oil-hardened Cuttin capacities Pliers Head Handles Ø , , , black atramentized polished 2, , , , , , , black atramentized polished plastic coated 2, , , , Haerhead Style Carpenters Pincers DIN ISO 9243 with strikin face for drivin in nails cuttin edes additionally hardened; cuttin ede hardness approx. 60 HRC Special tool steel, fored, oil-hardened Multi-functional: drivin in and pullin nails Pliers Head Handles black atramentized polished plastic coated

67 CARPENTERS PINCERS 55 Farriers Pincers (Tear-off Pliers for vehicle bodywork) DIN ISO the ideal pliers for the farrier with small head and anvil for redirectin horseshoe-nails also suitable for dismantlin work in vehicle body workshops cuttin edes additionally hardened; cuttin ede hardness approx. 59 HRC Special tool steel, fored, oil-hardened Pliers Head Head width black atramentized polished 20, Unsolin Pincer for horseshoes DIN ISO 5743 for the farrier also suitable for dismantlin work in vehicle body workshops also for dismantlin work on timber and metal cuttin edes additionally hardened; cuttin ede hardness approx. 59 HRC Special tool steel, fored, oil-hardened Pliers Head Head width black atramentized polished 30, Potters Pincers (Brick Pincers) DIN ISO 5743 for pottery work with wire cutter for soft wire cuttin edes additionally hardened; cuttin ede hardness approx. 59 HRC Special tool steel, fored, oil-hardened head width head width 20 Pliers Head Head width black atramentized polished 10, black atramentized polished 20,

68 CONCRETORS NIPPERS 99 0 Concretors Nippers (Tower Pincers, Steel Fixers Nippers) DIN ISO to twist and cut wire in one operation: fast, reliable and economical unobtained precision and lon service life make these the bestsellin concretors' nippers in the world cuttin edes additionally hardened; cuttin ede hardness approx. 61 HRC Hih-rade special tool steel, fored, oil-hardened K12 with 12 head, particularly suitable for tile pavin work Cuttin capacities Pliers Head Handles Ø Ø ,8 1, ,4 1, black atramentized polished 2,4 1, ,8 1, ,1 1, K black atramentized polished 2,4 1, ,8 1, ,4 1, black atramentized polished plastic coated 2,4 1, ,8 1, ,1 1, ,4 1, nickel plated 2,4 1, ,8 1,

69 CONCRETORS NIPPERS 99 1 Hih Leverae Concretors Nippers hih lever transmission DIN ISO % less effort required compared to conventional concretors nippers of the same size to lace concrete reinforcin steel with bindin wire from a roll wire is twisted and cut in a sinle pass hih-leverae joint, minimisin strain, even when thick bindin wires are used extra-slim form for tyin deep mounted steel rods the hih dampin of the cuttin stroke on cuttin throuh the bindin wire reduces the strain on tendons and muscles cuttin edes additionally hardened; cuttin ede hardness approx. 61 HRC Hih-rade special tool steel, fored, oil-hardened Cuttin capacities Pliers Head Handles Head width Ø Ø ,3 1,8 23,0 350 black atramentized polished ,8 2,0 25, ,3 1,8 23,0 350 black atramentized polished plastic coated ,8 2,0 25, ,3 1,8 23,0 350 nickel plated ,8 2,0 25,

70 66

71 CUTTING PLIERS 61 Bolt End Cuttin Nippers hih lever transmission DIN ISO 5743 powerful, compact, comfortable compared to conventional lever-assisted end cuttin nippers, reater cuttin capacity, less effort required and better handlin for all classes of wire includin piano wire exceptional cuttin capacity due to hih-leverae joint cuttin edes additionally induction hardened; cuttin ede hardness approx. 64 HRC Vanadium electric steel; fored, oil-hardened Extraordinary cuttin performance: also for piano wire Almost flush cuttin of bolts, nails etc. Particularly efficient for fence construction with slim two-colour multi-component sleeves without collar for better handlin and easier transport; with lare contact surface on the handles for better allotment of pressure and more comfort at work Pliers Head Handles Cuttin capacities Ø Ø Ø Ø black atramentized polished plastic coated black atramentized polished with slim multi-component rips Electronics Oblique Cuttin Nipper DIN ISO with cuttin edes for soft and medium hard wire without bevel, for flush cuttin cuttin edes additionally induction hardened; cuttin ede hardness approx. 58 HRC low-friction double sprin for entle and even openin sturdy, zero backlash box joint the polish toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools Hih-rade special tool steel, fored, oil-hardened Head Handles Cuttin capacities Ø Ø A Dimensions polished rips B D C 67

72 CUTTING PLIERS 64 Electronics End Cuttin Nippers DIN ISO precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics sturdy, zero backlash box joint low-friction double sprin for entle and even openin the polish or mirror polish (only finish 2) toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools cuttin edes additionally induction hardened; hardness at least 56 HRC Hih-rade special tool steel, fored, oil-hardened Style 0 End Cutter, with bevel End Cutter, without bevel End Cutter, with small bevel Style 2: End Cutter, mini-blade with small bevel Style 3 Oblique End Cutter, short head, with small bevel, α = 15 Style 4 Oblique End Cutter, short head, with small bevel, α= /02/11/ /42/

73 CUTTING PLIERS Style 5 Oblique End Cutter, short head, without bevel, for flush cuttin, α = 27 Style 6 Oblique End Cutter, mini-blade with small bevel, α = 65 Style 7 Oblique End Cutter, mini-blade with small bevel, head with recess, α = 35 Pliers Sets, see pae Style Head Handles Cuttin capacities Ø Ø Ø A Dimensions B D 0 polished plastic coated mirror polished rips polished plastic coated mirror polished rips mirror polished rips mirror polished rips mirror polished rips mirror polished rips mirror polished rips mirror polished rips C 69

74 CUTTING PLIERS 64 Electronics End-Cuttin Nippers ESD DIN ISO 9654 ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method ESD 90 precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics electrically discharin handles dissipative strudy, zero backlash box joint low-friction double sprin for entle and even openin the mirror polish toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools cuttin edes additionally induction hardened; hardness at least 56 HRC with two-colour dual component handles, black/rey Hih-rade special tool steel, fored, oil-hardened Style 1 End Cutter, with small bevel Style 3 Oblique End Cutter, short head, with small bevel, a = 15 Pliers Sets, see pae ESD 15 Style 6 Oblique End Cutter, mini-blade with small bevel, a = ESD ESD ESD ESD ESD Style Head Handles Cuttin Capacities Ø Ø Ø A Dimensions B D C ESD mirror polished rips ESD mirror polished rips ESD mirror polished rips

75 CUTTING PLIERS 67 Hih Leverae End Cuttin Nippers DIN ISO with cuttin edes for soft, hard and piano wire hih cuttin capacity with little effort due to optimum coordination of cuttin ede anle and transmission ratio cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC Chrome vanadium heavy-duty steel, fored, oil-hardened Cuttin capacities Pliers Head Handles Ø Ø Ø Ø black atramentized polished plastic coated chrome plated rips End Cuttin Nippers DIN ISO 5748 with cuttin edes for soft and hard wire also suitable for twistin and cuttin bindin wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 61 HRC Hih-rade special tool steel, fored, oil-hardened Also suitable for wire nettin in reinforced concrete construction Cuttin capacities Pliers Head Handles Ø Ø Ø black atramentized polished plastic coated End Cuttin Nippers for mechanics DIN ISO 5748 with cuttin edes for soft, hard and piano wire; also suitable for thin copper wires lap joint cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC Chrome vanadium heavy-duty steel, fored, oil-hardened Cuttin capacities Dimensions Pliers Head Handles A B D C Ø Ø Ø Ø black atramentized polished plastic coated chrome plated plastic coated

76 CUTTING PLIERS 72

77 CUTTING PLIERS 70 Diaonal Cutters DIN ISO the essential cuttin tool for versatile use hih quality material and precise workmanship for lon service life precision cuttin edes additionally induction hardened (cuttin ede hardness approx. 62 HRC) for soft and hard wire clean cuttin of thin copper wires, also at the cuttin-ede tips narrow head style for use in confined areas Vanadium electric steel; fored, oil-hardened Cuts fine wires cleanly alon the complete lenth of the blades Slim head style and precise cut at blade tips: Advantaeous when workin in confined areas Cuttin capacities Pliers Head Handles Ø Ø Ø black polished plastic coated atramentized black polished rips atramentized chrome plated chrome plated rips insulated chrome plated rips, VDE-tested chrome plated with dipped insulation, VDE-tested black atramentized polished plastic coated chrome plated rips chrome plated insulated rips, VDE-tested

78 CUTTING PLIERS 71 KNIPEX CoBolt Compact Bolt Cutters DIN ISO % less effort required compared to conventional hih-leverae diaonal cutters The inenious lever-action mechanism ensures an extremely favourable lever ratio with very little friction. The cuttin force is about 20 times hiher than the hand force applied. Clever muscle man precision cuttin edes for soft and hard wire and piano wire cuts components like bolts, nails, rivets, etc. up to 5.2 dia. exceptional cuttin performance with minimum effort because of unsurpassedly effective lever action desin cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC Chrome vanadium heavy-duty steel, fored, oil-hardened with slim two-colour multi-component sleeves without collar for better handlin and easier transport; with lare contact surface on the handles for better allotment of pressure and more comfort at work / / openin sprin and lockin device are interated in the handles also for comfortable work and protected transport Style 2 20 anled head with sinle-sided joint bar and diaonal cuttin ede for flush cuttin; with space for rippin Style 3 the recess in the blade allows easier cuttin of thicker wires, e.. for anchor bolts in false ceilins Style 4 the recess in the blade allows easier cuttin of thicker wires, e.. for anchor bolts in false ceilins; 20 anled head with sinle-sided joint bar and diaonal cuttin ede for flush cuttin; with space for rippin Openin sprin and transport lock Comparison between 71 0x 200 and 71 2x

79 CUTTING PLIERS Conventional tole lever assisted side cutter: max. openin approx. 3.5 reat weiht = 600 double tole lever joint cumbersome 600 joint axle New KNIPEX-Model e CoBolt : weiht only 330 ood handlin small size 30 % less effort required hard wire Ø 2 picture not true to scale 330 DEGREE OF FORCE REQUIRED 70 % 100 % 71 31/32/41 200: The cuttin ede recess near the joint holds thicker wires in a favourable cuttin position (optimum lever ratio). The re-positionin that is usual with bolt cutters is not needed here. Style Pliers Handles Cuttin capacities Ø Ø Ø Ø black atramentized plastic coated black atramentized with slim multi-component rips black atramentized with slim multi-component rips black atramentized plastic coated black atramentized with slim multi-component rips black atramentized plastic coated black atramentized with slim multi-component rips black atramentized plastic coated

80 CUTTING PLIERS Bolt Cutters cuts hard components up to 48 HRC cuttin capacity up to 48 HRC hardness robust cuttin edes are additionally induction hardened, cuttin-ede hardness approx. 62 HRC fored-in stopper with comfortable shock-absorber ood access due to very flat construction of head and joint area eronomically anled handles to minimise effort sturdy non-slip two-colour dual component handle sleeves precise adjustment (12 positions) by eccentric bolt hih cuttin performance with minimum effort due to optimum co-ordination of the cuttin ede anle, transmission ratio and eronomic handle shape bolted cutter head, replaceable Blade: chrome vanadium heavy-duty steel, fored, oil-hardened Joint: special tool steel, fored Handle: steel tube, powder-coated Fored-in stopper with dampin inserts: cushions the cuttin stroke comfortably Cuttin capacities Head Handles HRC 19 HRC 40 HRC 48 Ø Ø Ø rey atramentized rips rey atramentized rips rey atramentized rips rey atramentized rips Spare cutter head for complete with screws Spare cutter head for complete with screws Spare cutter head for complete with screws Spare cutter head for complete with screws 76

81 CUTTING PLIERS Concrete Mesh Cutter cuttin capacity up to 48 HRC hardness robust cuttin edes additionally induction hardened, cuttin-ede hardness approx. 62 HRC fored-in stopper with comfortable shock-absorber ood access due to very flat construction of head and joint area eronomically anled handles to minimise effort sturdy non-slip two-colour dual component handle sleeves precise adjustment (12 positions) by eccentric bolt hih cuttin performance with minimum effort due to optimum co-ordination of the cuttin ede anle, transmission ratio and eronomic handle shape bolted cutter head, replaceable Blade: chrome vanadium heavy-duty steel, fored, oil-hardened Joint: special tool steel, fored Handle: steel tube, powder-coated The special shape of the mesh cutter head, , enable it to cut structural steel that is lyin down flat. Head Handles HRC 19 Ø Cuttin capacities rey atramentized rips HRC 40 Ø HRC 48 Ø Spare cutter head for complete with screws 77

82 CUTTING PLIERS 72 Diaonal Cutters for plastics DIN ISO 5743 cuttin face flush round non-bevelled, for separatin moulded plastic components from sprues cuts soft materials such as lead in a flush cut with openin sprin Vanadium electric steel; fored, oil-hardened Head polished plastic coated polished rips polished plastic coated polished plastic coated 165 Handles

83 CUTTING PLIERS Diaonal Cutter for fibre optics (lass fibre cable) DIN ISO 5743 specially developed for cuttin fibre optics (lass fibre cables) cuttin face flush round cuttin edes additionally induction hardened with openin sprin Vanadium electric steel; fored, oil-hardened The KEVLAR fibres in strain relief are cut with the shears. Head Handles polished plastic coated Hih Leverae Centre Cutters DIN ISO with interated fored axle for heaviest duty with precision cuttin edes for soft, hard and piano wire cuts thick wires with less effort than other diaonal cutters of the same lenth centric precision cuttin edes hih cuttin performance with minimum effort due to optimum co-ordination of the cuttin ede anle, transmission ratio and eronomic handle shape cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC Chrome vanadium heavy-duty steel, fored, oil-hardened The cuttin edes are in the centre of the cutter head Pliers Head Handles Cuttin capacities Ø Ø Ø Ø black atramentized polished plastic coated

84 CUTTING PLIERS 74 Hih Leverae Diaonal Cutters DIN ISO % less effort required compared to conventional diaonal cutters of the same lenth. With interated fored joint axle for very touh, continuous use hih cuttin performance with minimum effort due to optimum co-ordination of the cuttin ede anle, transmission ratio and eronomic handle shape precision cuttin edes additionally induction hardened (cuttin ede hardness approx. 64 HRC) for all sorts of wire includin piano wire Chrome vanadium heavy-duty steel, fored, oil-hardened With interated fored joint axle for very touh, continuous use Style 1 with openin sprin; to be activated if required : openin sprin in deactivated position 74 12: just entle slidin with your thumb will activate the openin sprin Style 2 12 anled head offers clearance for rippin

85 CUTTING PLIERS leverae comparison between the diaonal cutter <=> hih leverae diaonal cutter Hih transmission of power Hih Leverae Diaonal Cutter: 290 N hand force required to cut hard wire (dia. 2 ) 20 % less hand force required joint axle Standard transmission of power Diaonal Cutter: 370 N hand force required to cut hard wire (dia. 2 ) 80 % 100 % hard wire (dia. 2 ) DEGREE OF FORCE REQUIRED 20 % reduction thanks to hih leverae power joint Style Pliers Head Handles Cuttin capacities Ø Ø Ø black atramentized polished plastic coated black atramentized polished rips chrome plated rips insulated chrome plated rips, VDE-tested with dipped insulation, chrome plated VDE-tested black atramentized polished rips black atramentized polished plastic coated black atramentized polished rips

86 CUTTING PLIERS 75 Electronics Diaonal Cutters DIN ISO 9654 bolted joint for hih precision and stress tolerance for ultra fine cuttin work, e.. in electronics and fine mechanics with sharp, round cuttin edes for soft and hard wire and piano wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC low-friction double sprin for entle and even openin Hih-rade special tool steel, fored, oil-hardened Style 0 with bevel Style 1 with bevel and lead catcher, no uncontrolled loss of cut wire ends Style 2 with small bevel Style 5 particularly narrow head, with bevel Bolted joint Style Pliers Handles Cuttin capacities Ø Ø Ø Ø A Dimensions B D burnished with plastic rips burnished with plastic rips burnished with plastic rips burnished with plastic rips

87 CUTTING PLIERS 76 Diaonal Cutters for electromechanics DIN ISO 5749 with sharp, precisely alined cuttin edes for soft, hard wire and piano wire cuttin edes additionally induction hardened, cuttin ede hardness approx. 63 HRC lap joint Vanadium electric steel; fored, oil-hardened Style 1 low-friction double sprin for entle and even openin Style 2 without bevel for flush cuttin of soft wires; low-friction double sprin for entle and even openin Style 8 particularly tapered head with small bevel for work in confined areas (cable harnesses, multiple stranded wires) Pliers Head Handles Cuttin capacities Ø Ø Ø Ø A Dimensions black atramentized polished plastic coated chrome plated plastic coated chrome plated rips black atramentized black atramentized black atramentized polished polished rips rips B D polished plastic coated

88 CUTTING PLIERS 77 Electronics Diaonal Cutters DIN ISO for fine cuttin work, e.. in electronics and fine mechanics sturdy, zero-backlash box joint low-friction double sprin for entle and even openin the polish or mirror polish (only finish 2) toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools cuttin edes additionally induction hardened, cuttin ede hardness approx. 62 HRC Hih-rade special tool steel, fored, oil-hardened round head, with bevel round head, with small bevel round head, with bevel and lead catcher no uncontrolled loss of cut wire ends pointed head, without bevel round head, without bevel; cuttin ede hardness approx. 57 HRC pointed head, with small bevel pointed head, without bevel; cuttin ede hardness approx. 57 HRC pointed, flat head, with small bevel; cuttin ede hardness approx. 57 HRC pointed mini-head, with small bevel Pliers Sets, see pae 197 Cuttin capacities Dimensions Head Handles B A D Ø Ø Ø polished plastic coated mirror polished rips mirror polished rips polished plastic coated mirror polished rips polished plastic coated mirror polished rips mirror polished rips mirror polished rips mirror rips polished mirror polished rips mirror polished rips

89 CUTTING PLIERS 77 Electronics Diaonal Cutters ESD DIN ISO ESD ESD ESD ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method 2472 for fine cuttin work, e.. in electronics and fine mechanics electrically discharin handles dissipative sturdy, zero-backlash box joint low-friction double sprin for entle and even openin the mirror polish toether with a fine film of oil offer effective rust protection no circuit faults caused by peelin chrome from plated tools cuttin edes additionally induction hardened, cuttin ede hardness approx. 62 HRC with two-colour dual component rips, black/rey Hih-rade special tool steel, fored, oil-hardened ESD round head, with small bevel ESD round head, with bevel and lead catcher no uncontrolled loss of cut wire ends ESD round head, without bevel ESD ESD ESD pointed head, with small bevel ESD pointed head, without bevel ESD pointed, flat head, with small bevel ESD pointed mini-head, with small bevel ESD ESD Pliers Sets, see pae 197 Head ESD mirror polished ESD mirror polished ESD mirror polished ESD mirror polished ESD mirror polished ESD mirror polished ESD mirror polished Handles rips rips rips rips rips rips rips Cuttin capacities Ø Ø Ø B Dimensions A D

90 CUTTING PLIERS 78 Electronic Super Knips DIN ISO 9654 precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics round, very sharp cuttin edes without bevel for flush cuttin precision shaped tips cut wires restin on a board from 0.2 dia. joint with stainless steel rivet cuttin edes additionally induction hardened extremely smooth movement for minimum operator fatiue with openin sprin and restricted openin in INOX or special tool steel / INOX stainless steel; cuttin ede hardness approx. 54 HRC INOX stainless steel; cuttin ede hardness approx. 54 HRC; with lead catcher no uncontrolled loss of cut wire ends cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC; with narrow head; special tool steel, burnished cuttin edes additionally induction hardened, cuttin ede hardness approx. 60 HRC; with narrow head; with lead catcher no uncontrolled loss of cut wire ends; special tool steel, burnished cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC; also suitable for cuttin lass fibre cables (fibre optics) special tool steel, burnished; with lead catcher no uncontrolled loss of cut wire ends; cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC precision round cuttin edes with very small bevel suitable also for hard wire; special tool steel, burnished; cuttin-ede hardness approx. 64 HRC precision round cuttin edes with very small bevel suitable also for hard wire; with lead catcher no uncontrolled loss of cut wire ends; special tool steel, burnished; cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC

91 CUTTING PLIERS optimum cuttin-ede eometry: precise, easy cuttin even if strands are restin on a board restricted openin for eronomic hand spreadin width rooves for non-slip rip when applyin a little pressure Pliers Head Handles Cuttin capacities Ø Ø Ø B Dimensions A D polished polished polished burnished burnished burnished burnished burnished burnished rips rips rips rips rips rips rips rips rips

92 CUTTING PLIERS 78 Electronic Super Knips ESD DIN ISO 9654 ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method ESD precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics electrically discharin handles dissipative round, very sharp cuttin edes without bevel for flush cuttin precision shaped tips cut wires restin on a board from 0.2 dia. joint with stainless steel rivet extremely smooth movement for minimum operator fatiue with openin sprin and restricted openin ESD ESD INOX - stainless steel; cuttin ede hardness approx. 54 HRC ESD INOX - stainless steel; cuttin ede hardness approx. 54 HRC; with lead catcher no uncontrolled loss of cut wire ends ESD cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC; special tool steel, burnished ESD ESD with lead catcher no uncontrolled loss of cut wire ends; cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC; special tool steel, burnished ESD Cuttin capacities Dimensions Pliers Head Handles B A D Ø Ø ESD polished rips ESD polished rips ESD burnished rips ESD burnished rips

93

94 CUTTING PLIERS 79 Precision Electronics Diaonal Cutters DIN ISO 9654 The subtle difference KNIPEX precision electronics pliers are made of hih-quality ball bearin steel and processed with the hihest deree of care. Each openin movement is entle and even without backlash. Each work step proceeds reliably and precisely. This makes work much easier for professionals precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics very precisely round and sharp cuttin edes with very small bevels for exact cuttin on delicate electronic components; also available without bevel for flush cuttin cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC approx. 20 % lihter than conventional electronics pliers bolted joint with particularly carefully manufactured joint surfaces for even, low-friction movement throuhout the entire openin rane smooth-runnin double sprin for a entle and even openin eronomically optimised multi-component handles fored from chrome vanadium ball-bearin steel / mini-head / round head specially for cuttin throuh hard wire and piano wire Cuttin edes without bevel / pointed head / pointed head; with lead catcher no uncontrolled loss of cut wire ends Cuttin edes with very small bevel Pliers Sets, see pae 197 Pliers Head Handles burnished polished burnished polished burnished polished burnished polished burnished polished burnished polished burnished polished burnished polished burnished polished rips rips rips rips rips rips rips rips rips Cuttin capacities Ø Ø Ø Ø B Dimensions A D

95 CUTTING PLIERS 79 Precision Electronics Diaonal Cutters ESD DIN ISO 9654 ESD pliers (electrostatic dischare) electrostatic enery is dischared throuh the handles in a radual and controlled manner which protects components endanered by electrostatic dischare in accordance with applicable standards, e.. IEC TR , DIN EN , SP Method ESD ESD ESD precision pliers for ultra fine cuttin work, e.. in electronics and fine mechanics very precisely round and sharp cuttin edes with very small bevels for exact cuttin on delicate electronic components; also available without bevel for flush cuttin electrically discharin handles dissipative cuttin edes additionally induction hardened, cuttin ede hardness approx. 64 HRC approx. 20 % lihter than conventional electronics pliers bolted joint with particularly carefully manufactured joint surfaces for even, low-friction movement throuhout the entire openin rane smooth-runnin double sprin for a entle and even openin eronomically optimised multi-component handles fored from chrome vanadium ball-bearin steel ESD ESD ESD / ESD mini-head ESD / ESD pointed head ESD ESD / ESD round head ESD specially for cuttin throuh hard wire and piano wire ESD / ESD pointed head; with lead catcher - no uncontrolled loss of cut wire ends Pliers Sets, see pae 197 Pliers Head Handles ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished ESD burnished polished rips rips rips rips rips rips rips rips rips Cuttin capacities Ø Ø Ø Ø B Dimensions A D

96 PIPE WRENCHES AND WATER PUMP PLIERS 81 Pipe Grippin Pliers for tube fittins and connectors DIN ISO 5743 ideal for tihtenin and releasin plastic pipe joints, round union nuts, etc. from 25 up to 65 dia. with serrated rippin jaws 4-position adjustable slip joint Chrome vanadium electric steel, fored, oil-hardened with plastic jaws for careful installation up to 60 dia. Pliers Handles Workin Capacity Ø chrome plated plastic coated chrome plated plastic coated pairs of plastic jaws for Cycle Pliers DIN ISO 5743 for very narrow screw connections Special tool steel, fored, oil-hardened straiht head anled head Pliers Head Handles Recess Head thickness Ø black atramentized polished plastic coated 6 / black atramentized polished plastic coated 6 /

97 PIPE WRENCHES AND WATER PUMP PLIERS 83 1 Pipe Wrenches 90 DIN Swedish pattern 90 anled jaws jaws with offset teeth in opposite direction teeth additionally induction hardened I-beam handle desin captive adjustin nut red powder coated, jaws briht round Chrome vanadium electric steel, fored, oil-hardened Pliers Ø Ø Inch Inch Clampin width / /8 1 1/ red powder-coated / / / Pipe Wrenches 45 DIN Swedish pattern 45 anled jaws jaws with offset teeth in opposite direction teeth additionally induction hardened I-beam handle desin captive adjustin nut red powder coated, jaws briht round Chrome vanadium electric steel, fored, oil-hardened Pliers Ø Ø Inch Inch Clampin width / red powder-coated /8 1 1/ / Pipe Wrenches S-Type DIN Slim, S-type jaw jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-lockin I-beam handle desin captive adjustin nut red powder coated, jaws briht round Chrome vanadium electric steel, fored, oil-hardened Pliers Ø Ø Inch Inch Clampin width /2 1/ / red powder-coated /8 1 1/ / /

98 PIPE WRENCHES AND WATER PUMP PLIERS 86 Pliers Wrenches pliers and wrench in a sinle tool DIN ISO 5743 The smooth jaws rip all parallel surfaces in the capacity rane with a hih deree of pressure if necessary and open up almost unlimited application possibilities for the pliers wrench: e.. for tihtenin locknuts, exertin pressure to activate the adhesive power of contact adhesives, ede breakin in tile work, snappin cable ties, utilisation as a small vice adjustable tool for tihtenin screws also excellent for rippin, holdin, pressin and bendin workpieces replaces a set of spanners, metric and imperial smooth jaws for cautious installation of plated fittins zero backlash jaw pressure prevents damae to edes of sensitive components adjustment at the touch of a button directly on the workpiece parallel jaws allow infinitely variable rippin of all widths to the specified maximum size reliable catchin of the hine bolt: no unintentional shiftin the action of the jaws allows quick tihtenin and release of bolted connections usin the ratchet principle lever transmission reater than 10-1 for stron rippin power Chrome vanadium electric steel, fored, oil-hardened Lenth 150 the mini pliers wrench for precision mechanics; ideal multi-purpose wrench in pocket size; indispensable companion in emerency tool kit Lenth 180 with narrow rippin jaws for tihtenin situations that require a slim tool Workin on plated fittins without damae of the surface Conventional open end wrench: ede pressure causes surface damae Pliers wrench: zero backlash contact pressure, no damae to edes Workin usin the ratchet principle Fast adjustment by pushin a button 94

99 PIPE WRENCHES AND WATER PUMP PLIERS smooth, parallel rippin jaws for work on sensitive surfaces adjustment at the touch of a button quick, reliable and precise infinitely variable adjustment of widths across flats for metric and imperial workpieces cam drive increases force to up to 10 times hand power Pliers Handles Inch Adjustment positions B1 Dimensions B2 B / nickel plastic coated plated / / nickel plated rips 1 3/ /

100 PIPE WRENCHES AND WATER PUMP PLIERS 87 0 KNIPEX Cobra Hihtech Water Pump Pliers DIN ISO 8976 KNIPEX Cobra the Hihtech Water Pump Pliers. No more time-consumin presettin of the required openin size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ineniously simple adjustment at the touch of a button directly on the workpiece fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required rippin surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable rippin box-joint desin: hih stability because of double uide reliable catchin of the hine bolt: no unintentional shiftin uard prevents operators' finers bein pinched Chrome vanadium electric steel, fored, oil-hardened Lenth 125 for use in precision mechanics, hobbies and home activities; improved access in very confined areas Lenth 180 ood access to the workpiece Lenth 250 / 300 very lare rippin capacity; ood access to the workpiece; hih load capacity havin a slim desin Teeth set aainst the direction of rotation have a self-lockin effect and prevent slippin on the workpiece Fine adjustment by pushin a button: fast and comfortable Fast and firm adjustment directly on the workpiece 96

101 PIPE WRENCHES AND WATER PUMP PLIERS + 30 % Enormous rippin capacity; 30 % more than conventional pipe wrenches Mini-Cobra: pocket sized tool with full fleded tool function. Capacity up to 27 dia. Pliers Head Handles Ø Inch Ø Adjustment positions rey atramentized polished with non-slip plastic coatin / rey atramentized polished with non-slip plastic coatin 1 1/ rey atramentized polished with non-slip plastic coatin 2 3/ / rey atramentized polished rips / / chrome plated with non-slip plastic coatin / chrome plated rips /

102 PIPE WRENCHES AND WATER PUMP PLIERS 87 0 KNIPEX Cobra XL/XXL Pipe Wrenches and Water Pump Pliers DIN ISO Both the KNIPEX Cobra XL and XXL offer the performance and comfort of water pump pliers while bein lihter in weiht and havin a reater rippin capacity than comparable pipe wrenches. The Cobra XL can e.. rip a 2 pipe fittin and weihs 50 % less than a 2 pipe wrench, which has a much lower rippin capacity. With its handy lenth of 400, the Cobra XL also fits into a plumber s tool kit. The Cobra XXL comes alon with the weiht of a 2 pipe wrench but offers a back-up rippin capacity up to 4 1/ Fine adjustment by pushin a button: fast and comfortable reater rippin capacity but much lower weiht than comparable pipe wrenches fast push-button adjustment directly on the workpiece, no unintentional slippin of the joint fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required rippin surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable rippin box-joint desin: hih stability because of double uide uard prevents operators' finers bein pinched Chrome vanadium electric steel, fored, oil-hardened Self-lockin on pipes and nuts. No slippin on the workpiece and less hand force required. Fast and firm adjustment directly on the workpiece. Pliers Head Handles Ø Inch Ø Adjustment positions rey atramentized polished plastic coated 3 1/ rey atramentized polished plastic coated 4 1/

103 PIPE WRENCHES AND WATER PUMP PLIERS Cobra XL rippin a union nut of a 2 pipe fittin lare rippin capacity of 95, would require a 3-inch pipe wrench 2 pipe wrench Cobra XL smaller dimensions and less weiht than 1 1/2 pipe wrenches rippin the 2 union nut exceeds the capacity of a 2 pipe wrench; no confident workin conditions 99

104 PIPE WRENCHES AND WATER PUMP PLIERS 85 KNIPEX SmartGrip Water Pump Pliers with automatic adjustment DIN ISO 8976 Adjustment to suit the workpiece is automatic with the KNIPEX SmartGrip! Place the outer jaw on the workpiece, squeeze the handles - turn! ideal for frequent chaneovers to workpieces of different sizes automatic adjustment per one-hand operation both for riht-handed and left-handed use ood access to the workpiece thanks to the slim dimensions in the head and joint area and flush joint bolt self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required rippin surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable rippin box-joint desin: hih stability because of double uide uard prevents operators' finers bein pinched lockin lever for space savin transport with reliable closed handles Chrome vanadium electric steel, fored, oil-hardened Automatic adjustment: no time-consumin trial and error-adjustin to find the correct openin size in case of differently sized workpieces (e.. the red hihlihted nuts and fittins). Everythin done with a sinle rasp. Slim dimensions for ood access to the workpiece usin one-hand operation Lockin lever for space savin transport with reliable closed handles Self-lockin on pipes and nuts: no slippin on the workpiece Pliers Head Handles Ø Inch Ø rey atramentized polished with non-slip plastic coatin 1 1/

105 PIPE WRENCHES AND WATER PUMP PLIERS 87 1 KNIPEX Cobra...matic Water Pump Pliers DIN ISO 8976 all features of the KNIPEX Cobra Special feature: automatic adjustment at the touch of a button directly on the workpiece the sheltered positioned sprin ensures that the pliers close automatically once the push-button is activated (one-hand operation!) Pliers Head Handles Ø Inch Ø Adjustment positions rey atramentized polished with non-slip plastic coatin Spare sprin for KNIPEX Cobra VDE Hihtech Water Pump Pliers, insulated DIN ISO 8976 IEC DIN EN The adjustment procedure to adapt to the workpiece is easy and reliable with the KNIPEX Cobra VDE: place the upper rippin jaw of the opened pliers on the workpiece, push pliers handle to close, done! adjustment by shiftin one jaw directly on to the workpiece: fast, reliable and comfortable handlin openin at the touch of a button off the workpiece fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width ood access to the workpiece due to slim size in the head and joint area self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required rippin surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable rippin box-joint desin: hih stability because of double uide uard prevents operators' finers bein pinched Chrome vanadium electric steel, fored, oil-hardened Quick settin without usin a push-button Just push the pliers handle to adjust! Pliers Handles Ø Inch Ø Adjustment positions chrome plated insulated rips, VDE-tested

106 PIPE WRENCHES AND WATER PUMP PLIERS 87 4 Multiple Slip Joint Spanner DIN ISO The KNIPEX Multiple Slip Joint Spanner combines the convenience of the comfortable push-button adjustment on the workpiece and the function of an all-purpose tihtenin tool. Jaw rippin with zero backlash prevents slippin on the bolt head or roundin edes. Even rusty or thick coated bolted connections which have no surfaces capable of bein ripped reliably by a conventional spanner can be manaed by the exceptionally powerful closin rippin jaws of this spanner. for metric and imperial nuts and screws with widths across flats from 10 to 32 (3/8" up to 1 1/4"); self-lockin in the rane from 17 on: no slippin on the workpiece zero-backlash rippin of metric or imperial hexaonal headed screws, no roundin of bolt heads reliable and tiht rippin of rounded, rusty, or thick coated bolts and screws ideal for work on vehicle brake systems quick tihtenin of bolted connections usin ratchet action adjustment at the touch of a button directly on the workpiece, also possible with one hand only fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width box-joint desin: hih stability because of double uide reliable catchin of the hine bolt: no unintentional shiftin favourable lever action: optimum transmission of force uard prevents operators' finers bein pinched replaces a set of wrenches, ideal for tihtenin locknuts Chrome vanadium electric steel, fored, oil-hardened In operation on rusted nut with rounded edes Self-lockin: no slip on workpieces; less effort required Fine adjustment by pushin a button: fast and comfortable Multiple Slip Joint Spanner as the second spanner for tihtenin locknuts Pliers Head Handles Inch Adjustment positions rey atramentized polished with non-slip plastic coatin 3/8-1 1/

107 PIPE WRENCHES AND WATER PUMP PLIERS 87 5 KNIPEX Cobra ES Water Pump Pliers extra-slim DIN ISO 8976 Due to the increasin compactness of components and machines the workspace becomes more confined. However, the requirements on the rippin force and capacity of the tools do not decrease on the other hand. KNIPEX- Cobra ES allows powerful rippin in confined areas ideal for service, maintenance and equipment repair, in automotive and eneral industry lon, narrow jaws particularly ood access to the workpiece due to very slim construction of head and joint area firm rip also on flat material due to three-point rest adjustment at the touch of a button directly on the workpiece fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required box-joint desin: hih stability because of double uide reliable catchin of the hine bolt: no unintentional shiftin favourable lever action: optimum transmission of force uard prevents operators' finers bein pinched Chrome vanadium electric steel, fored, oil-hardened Grips nuts up to 34 (1 5/8 ) across flats Very slim desin in the complete head and joint area (compared to conventional water pump pliers) Fine adjustment by pushin a button: fast and comfortable Optimum access to the workpiece. Ideal for service, maintenance and equipment repair, in automotive and eneral industry Pliers Head Handles Ø Inch Ø max. parallel openin width max. rippin depth Adjustment positions rey atramentized polished with non-slip plastic coatin 1 1/

108 PIPE WRENCHES AND WATER PUMP PLIERS 88 KNIPEX Alliator Water Pump Pliers DIN ISO self-lockin on pipes and nuts: no slippin on the workpiece and low hand force required rippin surfaces with special hardened teeth, teeth hardness approx. 61 HRC: low wear and stable rippin box-joint desin: hih stability because of double uide robust construction, insensitive to dirt; particularly suitable for outdoor work uard prevents operators' finers bein pinched Chrome vanadium electric steel, fored, oil-hardened Lenth 250 / 300 more output and comfort compared to conventional water pump pliers of the same lenth: 9-notch adjustment positionin for 30 % more rippin capacity; ood access to the workpiece due to slim size in the head and joint area Self-lockin on pipes and nuts: no slippin on the workpiece; the complete actuatin force can be used to turn the workpieces; not havin to squeeze the pliers handles reduces the required effort

109 PIPE WRENCHES AND WATER PUMP PLIERS Conventional water pump pliers Alliator 250: convincin alternative Alliator 250/ % specially hardened teeth hih resistance to wear, allowin durable, reliable rippin robust adjustin mechanism insensitive to dirt, particularly suitable for outdoor work 9-notch curved adjustment positionin 30 % more rippin capacity, optimised adjustment to the workpiece and a handy handle position, slim desin box joint, double uide no loosenin of the joint connection, continuous heavy duty Alliator The Alliator 250 rips the union nut in a 3/4 compression fittin with comfortable handle positionin Conventional 250- water pump pliers do not offer appropriate fit and they have an unfavourable handle position (rippin capacity exceeded) Alliator 300 instead of a 1 1/2 pipe wrench Alliator 300 with a rippin capacity on pipes of up to 2 3/4 and width across flats of 60 ; this corresponds to a rippin capacity of a 1 1/2 pipe wrench, which is much larer and heavier Pliers Head Handles Adjustment Ø Inch Ø positions / black polished with non-slip plastic coatin atramentized / / black polished rips atramentized / / chrome plated with non-slip plastic coatin / chrome plated rips / chrome plated insulated rips, VDE-tested with dipped insulation, chrome plated VDE-tested 2 3/