PRODUCT DETAILS HR Series
|
|
- Zoe Moore
- 6 years ago
- Views:
Transcription
1 PROUT ETILS N. uyamaca, El ajon, 900 escription: The patented cast parts are designed for round, tubular handrails. The part is attached with two stainless steel tamper resistant screws and two-part epoxy. THE INFORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY OF INTELLIEPT. NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INTELLIEPT IS PROHIITE. PTENTE ast luminum with clear anodize vailable in ast ronze (special order)."o - PN#HR.." O - PN#HR. PN#HRS.." O - PN#HR.. O - PN#HR..9" O - PN#HR.9 rill /" clearance holes on rail. Epoxy will create insular ring around fastener as it threads through tapped holes on bracket Tamper resistant screws are threaded through bracket and cross lock to rail. No tapping on rail is required. INTELLIEPT SN IEGO, LIFORNI, U.S.. (anchor Illustration only - SIZE WG. NO. REV. SLE FILE: SHEET OF (shown in ast luminum) Material: ast luminum with lear nododize coating (will accept paint). Outside Rail iameter: vailable for.,.,. and.9 outside diameter. Outside imensions: pprox. long. nchoring: nchored with two stainless steel tamper resistant screws in conjunction with two-part epoxy.
2 PROUT ETILS N. uyamaca, El ajon, 900 escription: The cast parts are designed for round, tubular handrails. The part is attached with two tamper resistant screws and barrel nuts. THE INFORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY OF Intellicept. NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Intellicept IS PROHIITE. ast luminum with clear anodize." O - PN# HN. PN# OKHN..9" O - PN# HN.9 PN# OKHN.9 rill /" holes through top and bottom of the tube Machine screws drop through part and the drilled holes on the tube arrel Nut inserts into the bottom hole. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES MTERIL FINISH INTELLIEPT, US (anchor illustration only - SLE FILE: SHEET (shown in ast luminum) Material: ast luminum with lear nododize coating (will accept paint). Outside Rail iameter: vailable for. and.9 outside diameter. Outside imensions: pprox. long. nchoring: nchored with two tamper resistant screws and barrel nuts.
3 PROUT ETILS HRS Series N. uyamaca, El ajon, 900 escription: The patented cast parts are designed for round, tubular handrails. The part is attached with two stainless steel tamper resistant screws and two-part epoxy. THE INFORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY OF INTELLIEPT. NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INTELLIEPT IS PROHIITE. PTENTE ast luminum with clear anodize vailable in ast ronze (special order)."o - PN#HR.." O - PN#HR. PN#HRS.." O - PN#HR.. O - PN#HR..9" O - PN#HR.9 rill /" clearance holes on rail. Epoxy will create insular ring around fastener as it threads through tapped holes on bracket Tamper resistant screws are threaded through bracket and cross lock to rail. No tapping on rail is required. INTELLIEPT SN IEGO, LIFORNI, U.S.. (anchor Illustration only - SIZE WG. NO. REV. SLE FILE: SHEET OF (shown in ast luminum) Material: ast luminum with lear nododize coating (will accept paint). Outside Rail iameter: vailable for. outside diameter. Outside imensions: pprox. long. nchoring: nchored with two stainless steel tamper resistant screws in conjunction with two-part epoxy.
4 PROUT ETILS Oak N. uyamaca, El ajon, 900 escription: The cast parts are designed for round, tubular handrails. The part is attached with two tamper resistant screws and barrel nuts. THE INFORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY OF Intellicept. NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION OF Intellicept IS PROHIITE. ast luminum with clear anodize." O - PN# HN. PN# OKHN..9" O - PN# HN.9 PN# OKHN.9 rill /" holes through top and bottom of the tube Machine screws drop through part and the drilled holes on the tube arrel Nut inserts into the bottom hole. UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES MTERIL FINISH INTELLIEPT, US (anchor illustration only - SLE FILE: SHEET (shown in ast luminum) Material: ast luminum with lear nododize coating (will accept paint). Outside Rail iameter: vailable for. and.9 outside diameter. Outside imensions: pprox. long. nchoring: nchored with two tamper resistant screws and barrel nuts.
5 PROUT ETILS HR Flat N. uyamaca, El ajon, 900 escription: The cast parts are designed for square handrails. The part is attached with two tamper resistant screws. (shown in ast luminum) Material: ast luminum with lear nododize coating (will accept paint). Outside Rail iameter: Flat bar or square tube. Outside imensions: pprox. x. nchoring: Please call with square tube dimensions for anchoring solution assistance.
Bollard Chain Eye 3/8" (Powder Coated) Quick Link Connector 5/16" (Powder Coated) Optional Accessories:
ollard R-98 General escription: 0 / R-98 Solar Light ollards increase safety and visibility for High-capacity batteries allow lights to operate for days hoose from a range of custom lighting colors, distribution
More informationDME Final Project Brief Project Summary
Matthew radley Omar Ghani ME Final Project 0070 rief Project Summary Objective To design a retracting mechanism for a communication board that is to be attached to a mobile wheelchair, with the following
More informationMOUNTING HOLES: 4X DIA 0.20 INCH 7.6 X 6.4 INCH PATTERN
4 2 ESRIPTION TE INITIL EVELOPMENT 204/0/08 UPTE K PNEL N PINOUTS 205/0/25 256 NOTES:. ORERING INFORMTION: 02. SKU MVN-700-0-K escription MobileView 7000 NVR Kit Items PORT NVR, HRNESS, ONNETION KIT MobileView
More informationAAE Model No. PVS-HSX High School Premier Pole Vault Standards
E Model No. PVS-HSX High School Premier Pole Vault Standards luminum thletic Equipment 1000 Enterprise rive, Royersford, P 19468 Toll Free: (800) 53-5471 Fax: (610) 85-378 www.esports.com 8 7 6 5 4 3 1
More informationSignComp TITLE DETAIL A
PRTS LIST PRT# ESRIPTION K9 Part in Single Face ody ssembly K90/ Part Inner / Outer Frame ssembly 590 Retainer Screw rill /" pilot hole Place the frame tight to the body before fastening. Ship To: Sales
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationREMOTE IR/LED MODULE REMOTE 3 REVISION HISTORY C DETAIL A SCALE 1 : 1.5 I\O PANEL - SHEET 1 OF 6 ECO ZONE REV. DESCRIPTION DATE APPR'D
00000 ISION HISTORY EO ZONE. ESRIPTION TE PPR'. 9...0 IR 0 0.. LE INITOR LNSPE WLL MOUNT HNGERS REMOTE IR/LE MOULE REMOTE. 0 PORTRIT WLL MOUNT HNGERS SERVIE PNEL KEEP PERFORTE RES LER FOR IRFLOW. 9..0..
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationSignComp DETAIL B DETAIL A REVEAL SETTING OPTIONS 3. Series 3 Access Body - Frameless Cover -
K90/9 Series ccess ody/frameless over 00 Series / Reveal K0 Series Radius Post Post ap Series Radius Post ap 00 ap Screw ttaches to the ody Zero Reveal #000, /8" Reveal #00, /" Reveal #00 #0 countersink
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationSCREWHEAD 0.25 INTERPOSER 0.28 FPC STIFFENER TOTAL 1.22
7 5 - PROPRIETRY INFORMTION - NO USE OR REPROUTION MY E ME OF THIS OUMENT WITHOUT EXPRESS WRITTEN PERMISSION OF NEOONIX..5.(SH) ITEM NO. ESRIPTION efault/qty SREW,WFERHE,M. STIFFENER FLEX INTERPOSER 5
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationAngle in Degrees. IMS 17mm (A & B) IMS 20mm IMS 27mm
VILLE THROUGH 400 andela VS ngle 00 000 800 600 400 andela 00 0 - -8-5 - -9-6 -3 0 3 6 9 5 8 ngle in Degrees IMS 7mm ( & ) IMS 0mm IMS 7mm Due to the variable nature of LED output and evolvement in technology,
More information3.6 (SH) INTERPOSER 0.28 SCREWHEAD 0.25 FPC STIFFENER TOTAL Default/QTY. 1 SCREW, WAFERHEAD, M1.
5 - PROPRIETRY INFORMTION - NO USE OR REPROUTION MY E ME OF THIS OUMENT WITHOUT EXPRESS WRITTEN PERMISSION OF NEOONIX. ITEM NO. ESRIPTION efault/qty. SREW, WFERHE, M. STIFFENER FLEX INTERPOSER.5 5 LIGNMENT
More informationMODEL # SLIDE-P(N) ASSEMBLY INSTRUCTIONS
MOL # SLI-P(N) SSMLY INSTRUTIONS 0-07-9 SPIFITIONS SPIFITIONS: Uprights: Shall be 3.5 O.. steel tubing, 2 gauge(.09 wall), powder coated after fabrication. ecks: Shall be 2 gauge punched steel with a PV
More informationGATEKEEPER DRAWING LIST Rev5.0
RWING PKGE GTEKEEPER RWING LIST Rev.0 -ug- rawing Number File Type rawing Type escription Last Rev J--000_RevE SLSM ssembly File Main ssembly Field assembly Rev.0 J-S-000_RevG SLRW rawing File Sub ssembly
More informationMAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationOne-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
More informationAssembly Instructions
Section A Interna-Rail Components Handrail systems utilizing Interna-Rail in-line fittings provide a sleek architectural finish with anodized fittings and aluminum pipe. Interna- Rail has the clean look
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
More informationPACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
More informationPORCH-LOC INSTALLATION INSTRUCTIONS
PORCH-LOC INSTALLATION INSTRUCTIONS 2017 HB&G Building Products, Inc. Porch-Loc Installation Instructions NOTE: DISCARD THE INSTALLATION INSTRUCTIONS AND HARDWARE THAT CAME IN YOUR PERMAPOST PACKAGING
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationTREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationInstallation and Operation Manual. Ajustable Valance Kits CAUTION: Duke Manufacturing Co.
Installation and Operation Manual Ajustable Valance Kits 2502757 2502857 : Please read this manual completely before attempting to install, operate or service this equipment This manual is Copyright 2018
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More information1/4 Turn Fastener - Black Painted Zinc 1/4 Turn Fastener - Stainless Steel 1/4 Turn Cam,.649 Offset - Zinc
ACCESSORIES Y001721 Y001722 Y001723 Y001724 Y001725 Y001726 Y001160 Y001363 Y001442 Y001184 Y002192 Y002193 PART NUMBER Y001721 Y001722 Y001723 Y001724 Y001725 Y001726 Y001160 Y001363 Y001442 Y001184 Y002192
More informationL.L.Bean. Platform Bed
L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
HRS-6C PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE HRS-6C INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationF-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
More informationFIXED MOUNTING SHUTTERS INSTALLATION
FIXED MOUNT APPLICATIONS The following components are included for Fixed Mount Applications. (4) Polycarbonate mounting brackets (slotted) (8) #10 x ¾ Stainless Steel Mounting Screws (1) 0.5 oz. Tube All-Weather
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationTREE GRATES / PROTECTION
TREE GRATES / PROTECTION 02/2017 TREES - THE ELIXIR OF LIFE FOR OUR CITIES Trees - The elixir of life for our cities Trees are very important for our cities. With their canopy of leaves, they regulate
More informationPivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
More informationContinuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
More informationATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 06/05/2015 Page 1 of
More informationInstallation Instructions HR910 International Compliant Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationInstallation Instructions HR910 Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationMelamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTORITY
WOOD END CAPS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE HRWS-6CSLBW INSTALLATION! 3 1/16" [77.7mm] THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Vertical Cable Panel System with Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all required
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationTable of Contents IMPORTANT
For Standard Height oors and Panels Only Plastic Laminate Restroom Partitions eiling-hung Series 600 Table of ontents Pre- Information...2 Layout imensions for rackets...3 Mounting rackets to Wall...4
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Encoder Installation Manual For: Bridgeport Series I Vertical Knee Mill and other similar mills Longitudinal X Axis front table mount Longitudinal Installation... *Supplied with encoder hardware **Supplied
More informationCLWP6048. Classic Sign Family Wall Panel. Part Number / Specifications. 60" Wide x 48" High CHPL Panel Wall Mount. ISO / Perspective View.
ISO / Perspective View Dwg. Date: pril 7, 25 ll Drawings Copyright. WP6048HRS (Single-Sided) Standard - Rectangular Panel C Upgrade Panel Option - Horizontal rched WP6048HPS (Single-Sided) Upgrade - Peaked
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
More informationP /8 Ring Diameter 90. Trim Ring Mounting Holes P /8. 393/16 Ring Diameter. Stud Minimum
PARTS LIST VARIABLE Top Over Head Support Bracket 1 872070 P4000-SMR Over Head Joiner Bracket 1 VARIABLE Bottom Over Head Bracket 1 79741 P4000-SMR 4 Angled Leg 4 100-00230-14 1/4-20 x 31/2 RD. HD. MS.
More information11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
P-RSS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSS INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationCLWP2418. Classic Sign Family Wall Panel. Part Number / Specifications. 24" Wide x 18" High CHPL Panel Wall Mount. ISO / Perspective View.
CLWP2418 ISO / Perspective View Dwg. Date: pril 7, 25 Temple, TX 765 CLWP2418. CLWP2418 WP2418HRS (Single-Sided) Standard - Rectangular Panel C Upgrade Panel Option - Horizontal rched WP2418HPS (Single-Sided)
More informationPathway Stair System For use with the Pathway Modular Ramp System, as freestanding stair, or with other structures.
Assembly Manual Pathway Stair System For use with the Pathway Modular Ramp System, as freestanding stair, or with other structures. Manufactured in the USA LIFETIME WARRANTY. Please register at www.ezaccess.com/warranty-satisfaction.
More informationSTEEPLE GATE BARRIER SET INSTRUCTIONS
740141 - STEEPLE GTE RRIER SET The 740141 Steeple Gate arrier Set consists of four height adjustable barriers; one 5 meter wide beam and three 4 meter wide beams. These barriers can also be used to effectively
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationKU-BAND FEED INSTALLATION OMT INTERFACE
Revision D April 22, 2016 Assembly Manual KU-BAND FEED INSTALLATION OMT INTERFACE General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com KU-BAND
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSAN-INT INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationSECTION 19: Endwood Fusion Welded Gate Installation Guide
SECTION 19: Endwood Fusion Welded Gate Installation Guide ASSEMBLY AND INSTALLATION FOR: Fusion Welded Gates Gate Frame with Full Size Pickets Privacy & Board on Board California & Shadowbox Gate width
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More informationSentinel Electronic Safe Installation Guide
Sentinel Electronic Safe Installation Guide by Rev 07/12/2004 P/N 100020 Table of Contents 1. OVERVIEW...3 2. SAFE INSTALLATION...3 2.1. TOOLS REQUIRED...3 2.2. SELECTING THE MOUNTING LOCATION...3 2.3.
More informationAssembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
More informationM1911-A1 REDUX. re dux (rē-dŭks ) adjective Brought back; returned. Used postpositively.
M1911-1 REU re dux (rē-dŭks ) adjective rought back; returned. Used postpositively. rawings of the Government Model M1911-1 Semi-utomatic Pistol, Originally esigned by John rowning for olt Firearms ompany,
More informationMounting Systems & Hydro-Grip
Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
P-OS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-OS INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationInstallation Instructions 3520WW/3520WWB Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationHardware. Brackets. Cast Chrome Plated Zamac Door Pack for High Pressure Laminate Compartments T O I L E T P A R T I T I O N S
Brackets 1a Stamped Stainless Steel U Bracket available in 1/2,3/4, 7/8 and 1 2a Stamped Stainless Steel T Bracket available 1/2, 3/4, 7/8 and 1 3a Stamped Stainless Steel F Bracket available in 1/2, 3/4,
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationframe bracket Dodge x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab)
, Rev 4 02/19 frame bracket 8552026 Dodge 3500 4 x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab) 14 5 7 2 4 11 9 10 17 3 6 1 8 13 15 16 18 12 ITEM PART # DESCRIPTION QTY. 1 00085.50 FLAT WASHER 10 2 00248
More informationInstalling AZEK Evolutions Rail
Installing Evolutions Rail TM Contemporary Installing AZEK Evolutions Rail Installing Evolutions Rail Contemporary Style... 2 Installing CableRail by Feeney for Evolutions Rail Contemporary Style... 8
More information4Post and 2Post Universal Shelf System for 19 Racks
Patent(s) Pending 4Post and 2Post Universal Shelf System for 19 Racks Installation Instructions Kit P/N: 108-4013 108-4261 Kit Contents (1) Shelf (2) Rear Brackets Front Hardware Kit (4) 8-32 x.375 Flat
More informationROCKFORD PROCESS CONTROL, INC.
esigners and Manufacturers of Institutional asework Hardware ROKFOR PROESS ONTROL, IN. 2020 Seventh Street Rockford, IL 61104 Phone: 815-966-2000 Fax: 815-966-2026 sales@rockfordprocess.com www.rockfordprocess.com
More informationOutdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages
- pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
More informationInstallation Instructions 12 x 12 base plate KBP-012, 900lb max cap Standard Professional Installation 1.5hrs
x base plate KBP-0, 900lb max cap a- etermine mounting location. It is recommended to close the tailgate to ensure that the mount does not block it from closing after installment (fig ). NOTE: Make sure
More informationMOUNTING INSTRUCTIONS
Standard Mounting Bracket Tilting Bracket* Mounting example Right side for upper tilt from 0 to 20 20 Spare parts: p/n SA197 Materials: extruded aluminum Hardware: stainless & zinc plated steel Dimensions
More informationOrdering Guide - Shaft Assemblies -
Ordering uide - Shaft ssemblies - S & TRS Series TRS - - SS - 4 ssembly Type S TRS Shaft Diameter Overall Length xxx - inches Shaft Material - 00 Steel SS - 440C Stainless Steel CR - Chrome Plated 00 Steel
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
More information8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
More informationInstallation Instructions for: Saris Cycle Aid. Saris Cycle Air. Saris Cycle Air HD
Installation Instructions for: Saris Cycle Aid Saris Cycle Air Saris Cycle Air HD A. Setbacks Parallel Wall or object Setbacks: Both sides of the Saris Cycle Aid should be at least 48 from walls or other
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationSteel Floor Connections
Steel Floor Connections Pioneering high strength steel connections since 1934 2 Steel Floor Connections by Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer
More information