SHANTILAL SHAH ENGINEERING COLLEGE. Production engineering department. Computer Aided Manufacturing ( ) Laboratory Manual

GUJARAT TECHNOLOGICAL UNIVERSITY

Type of course: Core GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH: Mechanical/Production/Manufacturing Engineering SUBJECT NAME: Computer Aided Manufacturing SUBJECT CODE: 2171903 BE Semester VII Prerequisite:

Since FLEXIBLE MANUFACTURING SYSTEM

Since 1992 www.hytecheducation.in FLEXIBLE MANUFACTURING SYSTEM Flexible Manufacturing System with Conveyor Floor mounted machines Vertical axes are with brake motors Pneumatic grippers for loading and

JEPPIAAR ENGINEERING COLLEGE

JEPPIAAR ENGINEERING COLLEGE Jeppiaar Nagar, Rajiv Gandhi Salai 600 119 DEPARTMENT OFMECHANICAL ENGINEERING QUESTION BANK VII SEMESTER ME6010 ROBOTICS Regulation 013 JEPPIAAR ENGINEERING COLLEGE Jeppiaar

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture

MECHATRONICS SYSTEM DESIGN

MECHATRONICS SYSTEM DESIGN (MtE-325) TODAYS LECTURE Control systems Open-Loop Control Systems Closed-Loop Control Systems Transfer Functions Analog and Digital Control Systems Controller Configurations

UNIT-1 INTRODUCATION The field of robotics has its origins in science fiction. The term robot was derived from the English translation of a fantasy play written in Czechoslovakia around 1920. It took another

CNC Lathe Programming-Basic

Western Technical College 31420312 CNC Lathe Programming-Basic Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 An introduction to planning and

Machine Tool Technology/Machinist CIP Task Grid

1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify

UNIT VI. Current approaches to programming are classified as into two major categories:

Unit VI 1 UNIT VI ROBOT PROGRAMMING A robot program may be defined as a path in space to be followed by the manipulator, combined with the peripheral actions that support the work cycle. Peripheral actions

Chapter 14 Automation of Manufacturing Processes and Systems

Chapter 14 Automation of Manufacturing Processes and Systems Topics in Chapter 14 FIGURE 14.1 Outline of topics described in this chapter. Date 1500Ğ1600 1600Ğ1700 1700Ğ1800 1800Ğ1900 Development Water

1 Robot Axis and Movement

1 Robot Axis and Movement NAME: Date: Section: INTRODUCTION Jointed arm robots are useful for many different tasks because of its range of motion and degrees of freedom. In this activity you will learn

: ADVANCED PRODUCTION PROCESSSES COURSE CODE : 6021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5

COURSE TITLE : ADVANCED PRODUCTION PROCESSSES COURSE CODE : 6021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Turret and Capstan lathes,

(Refer Slide Time: 01:19)

Computer Numerical Control of Machine Tools and Processes Professor A Roy Choudhury Department of Mechanical Engineering Indian Institute of Technology Kharagpur Lecture 06 Questions MCQ Discussion on

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List

1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.

Introduction to robotics. Md. Ferdous Alam, Lecturer, MEE, SUST

Introduction to robotics Md. Ferdous Alam, Lecturer, MEE, SUST Hello class! Let s watch a video! So, what do you think? It s cool, isn t it? The dedication is not! A brief history The first digital and

Teacher: CORE CompIntManuf Year: Essential Content Skills Vocabulary Assessments Lessons ResourcesStandards Questions

Teacher: CORE CompIntManuf Year: 2010-11 Course: CompIntManuf Month: All Months S e p t e m b e r Principles of Addressed in Lesson Essential Content Skills Vocabulary Assessments Lessons ResourcesStards

CHAPTER 5 INDUSTRIAL ROBOTICS

CHAPTER 5 INDUSTRIAL ROBOTICS 5.1 Basic of Robotics 5.1.1 Introduction There are two widely used definitions of industrial robots : i) An industrial robot is a reprogrammable, multifunctional manipulator

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip

Computer Aided Manufacturing

Computer Aided Manufacturing CNC Milling used as representative example of CAM practice. CAM applies to lathes, lasers, waterjet, wire edm, stamping, braking, drilling, etc. CAM derives process information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational

Automated Manufacturing

Chapter 22 Automated Manufacturing LEARNING OBJECTIVES After studying this chapter, students will be able to: Define the term automation. Describe several automated production systems. Define the term

UNDERSTANDINGS: Students will understand that

Curriculum Framework Computer Integrated Manufacturing Unit 2 Manufacturing Processes Lesson 2.3 Product Development ESTABLISHED GOALS It is expected that students will G1 Demonstrate an ability to identify,

Design & Manufacturing II. The CAD/CAM Labs. Lab I Process Planning G-Code Mastercam Lathe

2.008 Design & Manufacturing II The CAD/CAM Labs Lab I Process Planning G-Code Mastercam Lathe Lab II Mastercam Mill Check G-Code Lab III CNC Mill & Lathe Machining OBJECTIVE BACKGROUND LAB EXERCISES DELIVERABLES

Introduction to Robotics in CIM Systems

Introduction to Robotics in CIM Systems Fifth Edition James A. Rehg The Pennsylvania State University Altoona, Pennsylvania Prentice Hall Upper Saddle River, New Jersey Columbus, Ohio Contents Introduction

SUMMARY. Valves, pipes and manifold-type parts are ideal candidates for Turn-Cut.

SUMMARY Turn-Cut is a programming option available on Okuma horizontal machining centers that allows the machine to create bores and diameters that include circular and/or angular features. It allows users

Basic NC and CNC. Dr. J. Ramkumar Professor, Department of Mechanical Engineering Micro machining Lab, I.I.T. Kanpur

Basic NC and CNC Dr. J. Ramkumar Professor, Department of Mechanical Engineering Micro machining Lab, I.I.T. Kanpur Micro machining Lab, I.I.T. Kanpur Outline 1. Introduction to CNC machine 2. Component

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

Machine Tool Technology/Machinist CIP Task Grid

1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and

DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is

STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES

STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: MSP 111 (2009-1) Identifier is the postsecondary course prefix followed by Plan-of-Instruction

COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4

COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4 TIME SCHEDULE MODULE TOPICS PERIODS 1 Capstan and turret Lathe 21 Automatic

GCSE Engineering. Schemes of Work

GCSE Engineering Schemes of Work GUIDANCE FOR SCHEME OF WORK Please find below guidance on and an example of a scheme of work that could be applied for the GCSE Engineering specification. As every centre

FOR EXAMINERS ONLY. Signature

Department of Mechanical Engineering Indian Institute of Technology Kanpur TA 202: Manufacturing Processes Mid. Sem. Exam. VKJ/2014/SI; Time: 120 min; Max. Marks: 120 NOTES: (I) Answer all questions in

USING ROBOT TO SERVE THE NC LATHE

Bachelor s thesis Mechanical Engineering & Production Technology Riihimäki 25.11.2011 Pablo, John Paul D. & Rahman, Mohammad Ziaur ABSTRACT Riihimäki Mechanical Engineering and Production Technology Author

Laboratory Mini-Projects Summary

ME 4290/5290 Mechanics & Control of Robotic Manipulators Dr. Bob, Fall 2017 Robotics Laboratory Mini-Projects (LMP 1 8) Laboratory Exercises: The laboratory exercises are to be done in teams of two (or

Application Case. Delta Industrial Automation Products for Vertical CNC Machining Centers with Automatic Tool Changers (ATC)

Case Delta Industrial Automation Products for Vertical CNC Machining Centers with Automatic Tool Changers (ATC) Issued by Solution Center Date July, 2014 Pages 5 Applicable to Key words NC311 Series CNC

Manufacturing Operations

End of Course (EOC) Bank Blueprints Manufacturing Operations Table of Contents Table of Contents... 1 About Test Blueprints... 2 Gas Metal Arc Welding... 3 Shielded Metal Arc Welding... 4 Flux Cored Arc

INDUSTRIAL ROBOTS AND ROBOT SYSTEM SAFETY

INDUSTRIAL ROBOTS AND ROBOT SYSTEM SAFETY I. INTRODUCTION. Industrial robots are programmable multifunctional mechanical devices designed to move material, parts, tools, or specialized devices through

TRAINING PRODUCTS NEW PRODUCTS INSIDE

S INSIDE TRAINING S Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS TRAINING S Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online

G02 CW / G03 CCW Circular Interpolation Motion (Group 01) - Mill

Haas Technical Documentation G02 CW / G03 CCW Circular Interpolation Motion (Group 01) - Mill Scan code to get the latest version of this document Translation Available G02 CW / G03 CCW Circular Interpolation

Computer Numeric Control

Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct

IMPLEMENTATION OF WEB-BASED NC POSTPROCESSOR BUILDER

IMPLEMENTATION OF WEB-BASED NC POSTPROCESSOR BUILDER An NC postprocessor is an automatic manufacturing application program that takes cutter location data in APT syntax obtained from a CAD/CAM system as

Milind R. Shinde #1, V. N. Bhaiswar *2, B. G. Achmare #3 1 Student of MTECH CAD/CAM, Department of Mechanical Engineering, GHRCE Nagpur, MH, India

Design and simulation of robotic arm for loading and unloading of work piece on lathe machine by using workspace simulation software: A Review Milind R. Shinde #1, V. N. Bhaiswar *2, B. G. Achmare #3 1

ZJUDancer Team Description Paper

ZJUDancer Team Description Paper Tang Qing, Xiong Rong, Li Shen, Zhan Jianbo, and Feng Hao State Key Lab. of Industrial Technology, Zhejiang University, Hangzhou, China Abstract. This document describes

Processing and Quality Assurance Equipment

Processing and Quality Assurance Equipment The machine tool, the wash station, and the coordinate measuring machine (CMM) are the principal processing equipment. These machines provide the essential capability

TRAINING PRODUCTS. p f caminstructor.com 330 Chandos Court, Kitchener, ON, N2A 3C2

2019 Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online format. Textbooks include

Principles of Engineering

Principles of Engineering 2004 (Fifth Edition) Clifton Park, New York All rights reserved 1 The National Academy of Sciences Standards: 1.0 Science Inquiry 1.1 Ability necessary to do scientific inquiry

Slantbed Lathes N-Series N10 // N20 // N30 // N40 // N50 NILES-SIMMONS

Slantbed Lathes N-Series N10 // N20 // N30 // N40 // N50 NILES-SIMMONS THE N-SERIES The NILES-SIMMONS N-Series is a modular series of CNC slantbed lathes in fi ve size graduations N10 through N50. The

THE HUMAN POWER AMPLIFIER TECHNOLOGY APPLIED TO MATERIAL HANDLING

THE HUMAN POWER AMPLIFIER TECHNOLOGY APPLIED TO MATERIAL HANDLING H. Kazerooni Mechanical Engineering Department Human Engineering Laboratory (HEL) University ofcajifomia, Berkeley, CA 94720-1740 USA E-Mail:

5/11/ DAWOOD COLLEGE OF ENGINEERING & TECHNOLOGY- ENGR. ASSAD ANIS

1 INTRODUCTION TO CNC CNC was developed in late 40 s and early 1950 s by the MIT servomechanisms laboratory With CNC curves are easy to cut as straight lines, complex 3-D structures are relatively easy

VM-G Series Vertical articulated robot

VM-G Series Vertical articulated robot Robot Specifications (1) VM-6083G (Nickname: VM1000) Item Standard type (VM) Specifications Dust-proof & splash-proof type (VM-W) Model name of robot set (Note 1)

LABYRINTH: ROTATIONAL VELOCITY SHIH-YIN CHEN RANDY GLAZER DUN LIU ANH NGUYEN

LABYRINTH: ROTATIONAL VELOCITY SHIH-YIN CHEN RANDY GLAZER DUN LIU ANH NGUYEN Our Project 1. Will the review of performance measures from prior trials improve a participant s time in completing the game?

(Refer Slide Time: 00:50)

Computer Numerical Control of Machine Tools and Processes Professor A Roy Choudhury Department of Mechanical Engineering Indian Institute of Technology Kharagpur Lecture 03 Classification of CNC Machine

THE CARDIAC PUMP (Heart and circulatory system)

THE CARDIAC PUMP (Heart and circulatory system) STUDENT BOOKLET February 2007 Context: These days, many objects necessitate pumping apparatus: automobile, pool, sprayer, syringe, The matter that we pump

COMPUTER INTEGRATED MANUFACTURING LABORATORY (14AME31)

COMPUTER INTEGRATED MANUFACTURING LABORATORY (14AME31) (For III B.Tech - II SEM- Mechanical Engineering) DEPARTMENT OF MECHANICAL ENGINEERING SRI VENKATESWARA COLLEGE OF ENGINEERING & TECHNOLOGY R.V.S

www.silentengineer.com The Silent Engineer Advises It is very important for the Leaving Certificate Engineering student to take the following advice into account before commencing work on the Design Project:

Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations.

MTT Date: 09/13/2018 TECHNOLOGY MTT Machine Tool Technology--AA Students apply industry standard safety practices and specific safety requirements for different machining operations. Students calculate

Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:

Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for

Worksheet Answer Key: Tree Measurer Projects > Tree Measurer

Worksheet Answer Key: Tree Measurer Projects > Tree Measurer Maroon = exact answers Magenta = sample answers Construct: Test Questions: Caliper Reading Reading #1 Reading #2 1492 1236 1. Subtract to find

PREVIEW COPY. Table of Contents. Lesson One Using the Dividing Head...3. Lesson Two Dividing Head Setup Lesson Three Milling Spur Gears...

Table of Contents Lesson One Using the Dividing Head...3 Lesson Two Dividing Head Setup...19 Lesson Three Milling Spur Gears...33 Lesson Four Helical Milling...49 Lesson Five Milling Cams...65 Copyright

[E-BOOK] CNC MILLING PRODUCT CATALOG

24 April, 2018 [E-BOOK] CNC MILLING PRODUCT CATALOG Document Filetype: PDF 133.36 KB 0 [E-BOOK] CNC MILLING PRODUCT CATALOG CNC milling machines from Tormach and LittleMachineShop. Below is a group product

Lab Design of FANUC Robot Operation for Engineering Technology Major Students

Paper ID #21185 Lab Design of FANUC Robot Operation for Engineering Technology Major Students Dr. Maged Mikhail, Purdue University Northwest Dr. Maged B.Mikhail, Assistant Professor, Mechatronics Engineering

Module 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur

Module 1 Classification of Metal Removal Processes and Machine tools Lesson 2 Basic working principle, configuration, specification and classification of machine tools Instructional Objectives At the end

NPL Engineering: Here from the start

Here from the start 1902: The first Engineering Building. 1930s: Belt Driven Machine Tools 1930s: Wind Tunnel Modelling 1955: The Aerofoil Workshop especially equipped for the manufacture of model aerofoils

Essential Understandings with Guiding Questions Robotics Engineering

Essential Understandings with Guiding Questions Robotics Engineering 1 st Quarter Theme: Orientation to a Successful Laboratory Experience Student Expectations Safety Emergency MSDS Organizational Systems

Code No: M0326 /R07 Set No. 1 1. Define Mechatronics and explain the application of Mechatronics in CNC Machine tools and Computer Integrated Manufacturing (CIM). 2. (a) What are the various Filters that

BENZ for Beginners. The company and its products an easy explanation. TURN YOUR FUTURE INTO SUCCESS

BENZ for Beginners The company and its products an easy explanation TURN YOUR FUTURE INTO SUCCESS www.benz-tools.de 1 BASICS GET CONNECTED BENZ tooling systems enable their users to manufacture products

DE ME SEM-6 Detail Syllabus of Computer Aided Manufacturing ( ) L T P C ESE PA ESE PA

DE ME SEM-6 Detail Syllabus of Computer Aided Manufacturing (3361901) 2 0 2 4 70 30 20 30 150 Unit I. Fundamentals of CAM. 1.1 CAM -concept and definition.1.2 NC(Numerical Control),CNC(Computerized Numerical

Secondary Technical School TAG Term 1

TOPIC AND ASSESSMENT GUIDE Course Code Course Title CNCCT1001 Cool Tools Term/Year Term 1 2013/20 Programme Grade 10 Periods 24 periods/ 2 periods per week Course Purpose This course provides the learner

Winter 2017 FUNDAMENTALS OF DESIGN AND MANUFACTURING Time: Three hours Maximum marks: 100 Answer FIVE questions, taking ANY TWO from Group A,

1 Winter 2017 Time: Three hours Maximum marks: 100 Answer FIVE questions, taking ANY TWO from, ANY TWO from and ALL from. All parts of a question (a, b, etc) should be answered at one place. Answer should

Cincom Evolution Line

Efficient Production Impressive Value Cincom Evolution Line Sliding Headstock Type Automatic CNC Lathe Cincom Evolution line from Citizen Introducing the K16E faster processing with outstanding ease-of-use.

Principles of Engineering

Prerequisite: Introduction to Engineering Design Credit Value: 5 ABSTRACT The Principles of Engineering course advances students knowledge of engineering through a firm and in-depth exploration of multiple

Low cost robotic arm and cobotic

Low cost robotic arm and cobotic Autofina and University of Le Havre Autofina Session Agenda Introduction to Autofina Paresh Parekh, CEO Introduction to GREAH, University of Le Havre Jean-Francois Brethe

Machinist A Guide to Course Content

Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice

Computer-Aided Manufacturing

Computer-Aided Manufacturing Third Edition Tien-Chien Chang, Richard A. Wysk, and Hsu-Pin (Ben) Wang PEARSON Prentice Hall Upper Saddle River, New Jersey 07458 Contents Chapter 1 Introduction to Manufacturing

Model-based and Component-oriented Programming of Robot Controls

Laboratory CIM & Robotik Prof. Dipl.-Ing. Georg Stark Model-based and Component-oriented Programming of Robot Controls 1. Development Process of Industrial Control Units 2. Programming Paradigms - object-oriented

Chapter 1 Introduction

Chapter 1 Introduction It is appropriate to begin the textbook on robotics with the definition of the industrial robot manipulator as given by the ISO 8373 standard. An industrial robot manipulator is

Robotics II DESCRIPTION. EXAM INFORMATION Items

EXAM INFORMATION Items 37 Points 49 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER Career Cluster MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING, AND MATHEMATICS Performance Standards

FUNDAMENTALS ROBOT TECHNOLOGY. An Introduction to Industrial Robots, T eleoperators and Robot Vehicles. D J Todd. Kogan Page

FUNDAMENTALS of ROBOT TECHNOLOGY An Introduction to Industrial Robots, T eleoperators and Robot Vehicles D J Todd &\ Kogan Page First published in 1986 by Kogan Page Ltd 120 Pentonville Road, London Nl

LAB MANUAL / OBSERVATION

DHANALAKSHMI COLLEGE OF ENGINEERING DR. VPR NAGAR, MANIMANGALAM, CHENNAI- 601301 DEPARTMENT OF MECHANICAL ENGINEERING LAB MANUAL / OBSERVATION ME6611- CAD/CAM LABORATORY STUDENT NAME REGISTER NUMBER YEAR

common tasks individual work

Course is focused fundamental possibilities of automatization of machine tools and automatization of programme preparation for CNC machine tools. 1+2, CA classified assessment - 3 credits Presentations

Q2. Define Numerical Control. What are the different components of an N/ C system? Q6. List the advantages of CNC. How CNC is different from NC?

Assignment-I CNC Machines & Automation (Up to Mid-Semester Exam) Q1. How an N / C machine tool is different from a conventional machine tool. Q2. Define Numerical Control. What are the different components

DICOM Correction Item

DICOM Correction Item Correction Number CP- 617 Log Summary: Type of Modification Addition Name of Standard PS 3.3 2006 Rationale for Correction: The motion of modern patient support devices is no longer

POS Perkins Statewide Articulation Agreement Documentation Coversheet

POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL

TIMTOS 2017 EXHIBITS PROFILE

TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes

Scheme - G. Sample Test Paper-I

Sample Test Paper-I Marks : 25 Time:1 hour 1. All questions are compulsory. 2. Illustrate your answers with neat sketches wherever necessary. 3. Figures to the right indicate full marks. 4. Assume suitable

The Evolution of Machine Tools

The Evolution of Machine Tools ETSU ENTC 3020 Technology & Society Earliest Tools Primitive Hand tools Weapons & Tools Mineral, Bone, & Wood Stabbing, Cutting, Scraping, & Drilling Early Tools Wheel Efficient

ROBOT DESIGN AND DIGITAL CONTROL

Revista Mecanisme şi Manipulatoare Vol. 5, Nr. 1, 2006, pp. 57-62 ARoTMM - IFToMM ROBOT DESIGN AND DIGITAL CONTROL Ovidiu ANTONESCU Lecturer dr. ing., University Politehnica of Bucharest, Mechanism and

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: COMPUTER INTEGRATED MANUFACTURING ( COURSE CODE: )

GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: COMPUTER INTEGRATED MANUFACTURING ( COURSE CODE: 3385506 ) Diploma Programme in which this course is offered Fabrication

Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70

Name : Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/2009-10 2009 TECHNOLOGY OF MACHINING Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates

Robotics Prof. Dilip Kumar Pratihar Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Robotics Prof. Dilip Kumar Pratihar Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 01 Introduction to Robot and Robotics Let us start with the course on Robotics.

AUTOMATION OF LATHE USING PNEUMATIC ACTUATORS

International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 3, March 2017, pp. 419 425 Article ID: IJMET_08_03_046 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=3

John Henry Foster INTRODUCING OUR NEW ROBOTICS LINE. Imagine Your Business...better. Automate Virtually Anything jhfoster.

John Henry Foster INTRODUCING OUR NEW ROBOTICS LINE Imagine Your Business...better. Automate Virtually Anything 800.582.5162 John Henry Foster 800.582.5162 What if you could automate the repetitive manual

CHAPTER 6 EXPERIMENTAL VALIDATION AND RESULTS AND DISCUSSIONS

119 CHAPTER 6 EXPERIMENTAL VALIDATION AND RESULTS AND DISCUSSIONS 6.1 CNC INTRODUCTION The CNC systems were first commercially introduced around 1970, and they applied the soft-wired controller approach

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis

Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both

Angle Encoder Modules

Angle Encoder Modules May 2015 Angle encoder modules Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They

Total Test Questions: 34 Levels: Units of Credit: 0.50

DESCRIPTION The first in a sequence of courses that prepares individuals with a lab-based hands-on curriculum combining electrical, mechanical and engineering principals. Students will learn to design,

PDF - LATHE MACHINING OPERATIONS DOWNLOAD

02 March, 2018 PDF - LATHE MACHINING OPERATIONS DOWNLOAD Document Filetype: PDF 524.74 KB 0 PDF - LATHE MACHINING OPERATIONS DOWNLOAD For metal lathe, mini lathe, milling other general machining operations.

College of Engineering and Computer Science Manufacturing and Industrial Engineering Department ENGT 3320 COMPUTER INTEGRATED MANUFACTURING

College of Engineering and Computer Science Manufacturing and Industrial Engineering Department ENGT 3320 COMPUTER INTEGRATED MANUFACTURING Course Number : ENGT 3320.01 Instructor : Dr. Immanuel Edinbarough

Tool Shop. TCM Servicecenter Bochum GmbH TOOL CONSULTING & MANAGEMENT. Copyright Servicecenter Bochum 07/08/2006 Page 1 of 10

Tool Shop TCM Servicecenter Bochum GmbH Servicecenter Bochum 07/08/2006 Page 1 of 10 We See Ourselves as Partners Good partnership to us means to manufacture highquality machine- and equipment components