MM5 Design Studio Model Mill 5 Axis, Linear Motors

Transcription

1 Design Studio Model Mill 5 Axis, Linear Motors

2 A huge Gantry CNC Mill may at first seem like the the ideal machine for milling car models, but it is not a suitable solution for many Design Studios where space is at a premium. The was designed for mounting in areas with low ceiling heights and restricted floor loadings. In most cases the machine can mount on top of the existing concrete floor and next to an existing surface plate. Horizontal Arm Machines such as the TARUS are better suited to milling car models compared to a Vertical Spindle Gantry machine; consider the detail at the lower portions of a car model and the long reach required to mill that model with a Gantry. An open Horizontal Arm machine is a much nicer tool for a Modeler who must pack clay or modeling paste onto a model to make modifications compared to the confinement of a Gantry Machine. With the, very high levels of milling performance are reached with the smallest possible footprint and infrastructure modifications. Linear Motor Direct Drive makes this possible along with the latest Digital CNC Systems including, Heidenhain TNC640 and Siemens 840D with TARUS DS User Interface. Surface Quality and Accuracy are outstanding and the Linear Motor Direct Drive are Backlash Free and quiet. The 2 Axis Milling Head allows quick and easy cutter angle adjustment with RTCP, and also full 5 axis CNC milling if desired. A powerful water cooled HSK40 spindle quietly operates at up to 12,000 rpm with 3.5 kw of power and is suitable for milling clay as well as foam and epoxy up to 750 kg/m3 density.

3 D D DETAIL A SCALE.2 C C B B A A A NON-DISCLOSURE STATEMENT YOU MAY NOT REPRODUCE OR COPY ALL OR PART OF THIS PRINT OR DISCLOSE SAME TO A THIRD PARTY WITHOUT WRITTEN PERMISSION FROM AN AUTHORIZED REPRESENTATIVE OF TARUS PRODUCTS, INC. DETAILED pderieu CHECKED pderieu MATERIAL 1/16/2016 1/16/2016 D NTS CML CENTER LINE OF BASE CENTER LINE OF ROTARY TABLE [8298] 33.6 [853] 7.9 [200] 4.7 [120] TABLE TOP TO BE 3mm ABOVE FINISH FLOOR FIXTURE MOUNTING HOLES (CUSTOMER TO SPECIFY) 98.4 [2500] ARMATURE MOUNTING HOLES (CUSTOMER TO SPECIFY) 59.1 [1502] Z TRAVEL [6000] [6825] X TRAVEL [2591] 93.1 [2366] Y TRAVEL 1.0 [25] 43.3 [1100] 70.9 [1800] 91.4 [2320] 86.6 [2200] 1.4 [37] 15.7 [400] 86.6 [2200] WORK FLOOR 19.6 [497] [4242] [5492] 44.8 [1137] [6146] [8514] PART NAME SIZE LINEAR CLAYMILL WITH ROTARY TABLE SCALE DWG NO. 1

4 Design Studio Model Mill 5 Axis, Linear Motors *photograph courtesy of Volkswagen Design Potsdam. Specifications* X Axis Y Axis (vertical) Z Axis 6900 mm (standard) custom lengths available 1834 mm 1400 mm Maximum Feed Rate 38 meters per minute, 1 meter per second 2 Milling Box Milling Spindle 6146 mm by 1800 mm by 2200 mm wide model can be milled HSK 40, rpm, 3.5 kw, 12 Nm Milling Head Travel A Axis 105, C Axis +/ Milling Head Drive Position Feedback CNC System Liquid Cooled Torque Motors with 46:1 Gear Reduction, 200 nm Force Linear Scales on X,Y and Z Axes, Direct Angle Encoder for A and C Axes Heidenhain TNC640 or Siemens 840D with TARUS DS User Interface *Optimum machine performance depends upon installation conditions, such as floor condition, concrete foundation, AC power supply, air supply, and ambient air conditions. Information may change without notice.

5 Design Studio Model Mill 5 Axis, Linear Motors

6 TARUS is proud to Manufacture our Machines in Sterling Heights, Michigan Contact: Commerce Drive, Sterling Heights, MI, 48312,