Katalog ND Spare Parts List GP (7)
|
|
|
- Leo Curtis
- 5 years ago
- Views:
Transcription
1 Katalog ND Spare Parts List (7) ANITA B, s.r.o. Hliníky Boskovice Czech Republic tel: , fax:
2 anita-b TABLE OF CONTENTS Spare Parts Lists A1 A2 B C1 C2 D2 D3 D4 E F G1 G2 H1 I1 I3 J K K1 K2 K3 K4 K5 K6 K8 L N1 N2 Frame and Cover Parts..18,19 Thread Tension Mechanism..20,21 Upper Shaft Mechanism...22,23 Lower Shaft and Clutch Mechanism..24,25 Timing Belt DrivingMechanism 26,27 Lower Feed Mechanism.28,29 Feed Shaft Mechanism...30,31 Stitch Adjuster Mechanism....32,33 Needle Bar and Presser Foot Mechanism...34,35 Thread Take-Up Lever Mechanism 36,37 Roller Presser Foot Mechanism..38,39 Presser Foot Bar Mechanism..40,41 Right Side Hook Mechanism..42,43 Right Side Hook Post Mechanism.44,45 Lef Side Post Mechanism. 46,47 Knife Actuating Mechanism...48,49 Backtacking Mechanism Needle Feed and Driven Roller Mechanism...50,51 Left Side Post and Backtacking Feed Mechanism..52,53 Upper Driven Roller Backtacking Feed Mechanism.. 54,55 Telescopic Shaft Driven Roller Mechanism...56,57 Upper Shaft Driven Roller Mechanism..58,59 Rods Lower Backtacking Mechanism 60,61 Electric Accessory...62,63 Auto Presser Lifting Solenoid Mechanism..64 Bobbin Winder.65 Accesories...66,67 2
3 anita-b Frame and Cover Parts A1 3
4 anita-b Frame and Cover Parts A1 Ref.No. Part No. Name of Part Q ty A1-1 GP/ Face Plate 1 A1-2 GP/ Screw (M5x0,8x25) 1 A1-3 GP/ Screw (M5x0,8x35) 1 A1-4 GP/ Thread Take-up Cover 1 A1-5 GP/ Screw (M5x0,8x8) 1 A1-6 GP/ Hole Thread Retainer 1 A1-7 GP/ Screw (M4x0,7x4) 1 A1-8 GP/ Arm Side Cover 1 A1-9 GP/ Screw (M5x08x7) 2 A1-10 GP/ Thread Guide Wire 1 A1-11 GP/ Screw (M5x08x7) 1 A1-12 GP/ Stopper 1 A1-13 GP/ Screw (M4x07x4,5) 1 A1-14 GP/ Thread Guide Wire 1 A1-15 GP/ Screw (M5x08x7) 1 A1-16 GP/SM5-2.4 Bracket 1 A1-17 GP/M6x40 Screw (M6x40 DIN 912) 2 A1-18 GP/ Bottom Cover 1 A1-19 GP/ Screw (M5x0,8x10) 5 4
5 anita-b Thread Tension Mechanism A2 5
6 anita-b Thread Tension Mechanism A2 Ref. No. Part No. Name of Part Q ty A2-1 GP/ Thread Tension Regulator Assy/deska nap.úpl. 1 A2-2 GP/ Thread Tension Regulator Assy/deska nap.úpl. 0 A2-3 GP/ EGS3221 Solenoid/magnet EGS A2-4 GP/ SM4-6 Base Plate/deska napínačů 1 A2-5 GP/ SM2-2.6 Bracket/rameno 1 A2-6 GP/ SM Screw/šroub pomoc.napínače,úpr. Z A2-7 GS/ Brake Plate/misky pomocného napínače 2 A2-8 GP/ SM4-22 Conus Spring/pružina pomocného napínače 1 A2-9 GS/ Nut/matice pomocného napínače 1 A2-10 GP/ SM2-2.8 Pin/kolík 1 A2-11 GP/ SM3-32 Pin/kolík 0 A2-12 GP/ Thread Tension Stud/šroub napínače 1 A2-13 GP/ SM3-10 Thread tension stud/šroub napínače 0 A2-14 GP/ DIN934-M2,5 Nut/matice M2,5 DIN A2-15 GP/ JV2,0x13,8 Pin/kolík-jehla JV2,0x13,8 1 A2-16 GP/ Screw/šroub 2 A2-17 GP/ Tension Release Spring/pružina napínače 1 A2-18 GP/ JV2,5x13,8 Pin/kolík-jehla JV2,5x13,8 1 A2-19 GP/ Tension Disc/misky napínače 2 A2-20 GP/ Tension Disc Washer/podložka napínače 1 A2-21 GP/ Tension Spring/pružina napínače 1 A2-22 GP/ Nut/matice napínače 2 A2-23 GP/ Screw/šroub (M2,5x8 DIN 84A) 1 A2-24 GP/ Screw/šroub (M2,5x12 DIN 84A) 0 A2-25 GP/ Spring Guide Assy/miska upravovací pružiny 1 A2-26 GP/ Thread Take-up Spring/upravovací pružina 1 A2-27 GP/ Thread Take-up Spring/upravovací pružina 0 A2-28 GP/ Thread Tension Stud/šroub 1 A2-29 GP/ Screw/šroub 1 A2-30 GP/ Thread Tension Regulator Bushing/pouzdro 1 A2-31 GP/ SM Screw/šroub pomoc.napínače,úpr. z A2-32 GP/ JV2,5x21,8 Pin/kolík-jehla JV2,5x21,8 0 A2-33 GP/ Tension Releasing Pin/kol.vypínání napínače 1 A2-34 GP/ Screw/šroub 1 A2-35 GP/ Screw/šroub 1 A2-36 GP/ Bushing/distanční kroužek 1 6
7 anita-b Upper Shaft Mechanism B 7
8 anita-b Upper Shaft Mechanism B Ref.No. Part No. Name of Part Q ty B-1 GP/ Crank Cam 1 B-2 GP/ Screw (M5x0,8x12) 2 B-3 GP/ Screw (M7x1,0x22) 1 B-4 GP/ Screw (M7x1,0x16,5) 1 B-5 GP/ Screw (M6x0,75x8) 1 B-6 GP/ Bushing 1 B-7 GP/ Upper Shaft 1 B-8 GP/ Bushing 0 B-9 GP/ Ball Bearing 2 B-10 GP/ Timming Belt 220xL 1 B-10-1 GP/ Timming Belt 220xL 1 B-11 GP/ Timming Belt Wheel 2 B-12 GP/ Screw (M6x0,75x10) 2 B-13 GP/ Screw (M6x0,75x8) 6 B-14 GP/ Ball Bearing 2 B-15 GP/ Upper Shaft Bushing 2 B-16 GP/ Bushing 1 B-17 GP/ Washer 2 B-18 GP/ Screw (M6x1,0x16) 1 B-19 GP/ Feed Regulator Scale 1 B-20 GP/ Pulley Balance Wheel 1 B-21 GP/ Screw (M6x1,0x16) 2 B-22 GP/ Screw (M6x1,0x35) 1 8
9 anita-b Lower Shaft and Clutch Mechanism C1 9
10 anita-b Lower Shaft and Clutch Mechanism C1 Ref.No. Part No. Name of Part Q ty C1-1 GP/ Shaft 1 C1-2 GP/ Retaining Ring 1 C1-3 GP/SM Shaft 1 C1-4 GP/ Coupler 1 C1-5 GP/ Screw (M6x0,75x6) 4 C1-6 GP/ Coupler 1 C1-7 GP/119081A Connecting Plate 1 C GP/ Screw (M6x0,75x7) 2 C GP/ Safety Clutch Seat 1 C GP/ Spring 2 C GP/ Latch 1 C GP/ Hinge Stud 1 C GP/ Coupler (right) 1 C GP/ Pin 2 C GP/ E - Ring 1 C GP/ Stud 2 C GP/ E - Ring 1 C GP/ Drop - In Pin 1 C GP/ Washer 1 C GP/ Spring 1 C GP/ Ring 1 10
11 anita-b Timing Belt Driving Mechanism C2 11
12 anita-b C2 Ref.No. Part No. Name of Part Q ty C2-1 GP/ Plug 2 C2-2 GP/ Retaining Ring 1 C2-3 GP/ Ball Bearing 2 C2-4 GP/ Timming Belt Wheel 1 C2-5 GP/ Screw (M6x0,75x8) 2 C2-6 GP/ Screw (M6x0,75x10) 2 C2-7 GP/ Collar (Left) 1 C2-8 GP/ Screw (M6x0,75x4,5) 4 C2-9 GP/ Ball Bearing 1 C2-10 GP/ Timming Belt Wheel 1 C2-11 GP/ Timming Belt 210xL 1 C2-11 GP/ Timming Belt 210xL 1 C2-12 GP/ Shaft 1 C2-13 GP/ Collar (Right) 1 12
13 anita-b Lower Feed Mechanism D2 13
14 anita-b Lower Feed Mechanism D2 Ref.No. Part No. Name of Part Q ty D2-1 GP/ Roller Bracker 1 D2-2 GP/ Bevel Gear 1 D2-2-1 GP/ Roller Bracker 1 D2-2-2 GP/ Roller Bracker 1 D2-2-3 GP/ Feed Wheel 1 D2-3 GP/ Bracket 1 D2-3-1 GP/ Screw 1 D2-3-2 GP/ Screw 2 D2-4 GP/ Collar 1 D2-4-1 GP/ Screw 2 D2-5 GP/ Bushing 1 D2-6 GP/119723A Bevel Gear Assy 1 D2-7 GP/ Bushing 2 D2-8 GP/ Clutch 1 D2-9 GP/ Screw (M5x08x4,5) 4 D2-10 GP/119535A Clutch Assy 1 D2-11 GP/ Shaft 1 D2-12 GP/ Bushing 1 D2-13 GP/ Bevel Gear Assy 1 D GP/5045 Bevel Gear (Small) 1 D GP/5046 Bevel Gear (Medium) 1 D GP/ Screw (M6x0,75x4,5) 4 14
15 anita-b Feed Shaft Mechanism D3 15
16 anita-b Feed Shaft Mechanism D3 Ref.No. Part No. Name of Part Q ty D3-1 GP/ Retaining Ring 1 D3-2 GP/ Washer 1 D3-3 GP/ Washer 6 D3-4 GP/ Needle Bearing 3 D3-5 GP/ Bushing 1 D3-10 GP/ Shaft 1 D3-11 GP/ Bushing 1 D3-12 GP/ Crank 1 D3-13 GP/ Screw (M5x0,8x12) 4 D3-14 GP/ Screw (M6x0,7x8) 2 D3-15 GP/ Crank 1 D3-16 GP/ Screw (M6x0,75x4,5) 3 D3-17 GP/ Bushing 1 D3-18 GP/ Collar 1 16
17 anita-b Stitch Adjuster Mechanism D4 17
18 anita-b Stitch Adjuster Mechanism D4 Ref.No. Part No. Name of Part Q ty D4-1 GP/ Connecting Rod 1 D4-2 GP/ Ball Bearing 1 D4-3 GP/175038A Crank Rod Set 1 D4-4 GP/ Needle Bearing 1 D4-5 GP/ Bearing Stud 1 D4-6 GP/ Feeding Adjusting Plate 1 D4-7 GP/ Screw (M5x0,8) 1 D4-8 GP/ Nut (M5x0,8x4) 1 D4-9 GP/ Spring 1 D4-10 GP/ E-Ring 1 D4-11 GP/ Spring 1 D4-12 GP/ Pin 1 D4-13 GP/ Screw (M6x1,0) 1 D4-14 GP/ Cam Assy 1 D GP/ Stitch Regulating Seat 1 D GP/ Stitch Regulating Fix Seat 1 D GP/ Feed Adjusting Screw 1 D GP/ Screw (9/64x40x12) 1 D GP/ Nut (9/64x40x2,5) 1 D GP/ Friction Plate 1 D GP/ Screw (M6x0,75x10) 1 D GP/ Screw (M6x0,75x10) 1 D GP/ Screw (11/64x40x2,5) 1 D GP/ Eccentric Wheel 1 D GP/ Spring 1 D GP/ Collar 1 D GP/ Screw (11/64x40x7) 2 18
19 anita-b Needle Bar Feed and Presser Foot Mechanism E 19
20 anita-b Needle Bar Feed and Presser Foot Mechanism E Ref.No. Part No. Name of Part Q ty E-1 GP/ Needle Bar 0 E-2 GP/ Ring Clamp 0 E-3 GP/ Screw (M4x0,7x8) 0 E-4 GP/ Screw (1/8x44x3,5) 0 E-5 GP/ Screw (M3x0,5x4) 0 E-6 GP/ Needle Holder (2,8) 0 E-6 GP/ Neelde Holder (2,4) 0 E-6 GP/ Needle Holder (3,2) 0 E-7 GP/ Needle Bar 1 E-8 GP/ Screw(M3x0,5x4) 1 E-9 GP/ Thread Guide 1 E-10 GP/ Pin 1 E-11 GP/ Needle Bearing 2 E-12 GP/ Washer (14x8,1x1mm) 2 E-13 GP/ Screw (M6x1,0x25) 2 E-14 GP/ Nut (M6x1,0x4,8) 2 E-15 GP/ Pin 1 E-16 GP/ Shaft (12x390) 1 E-16.I GP/ Ewasher 1 E-17 GP/ Pin 1 E-18 GP/ Connecting Rod 1 E-19 GP/ Washer 1 E-20 GP/ Retaining Ring (12mm) 1 E-21 GP/ Spring Plate 1 E-22 GP/ Screw (M6x1,0x8) 1 E-23 GP/ Spring 1 E-24 GP/ Crank 1 E-25 GP/ Pin 1 E-26 GP/118543A Crank Shaft 1 E-27 GP/ E-Ring 1 E-28 GP/ Spring Plate 2 E-29 GP/ Screw (M5x0,8x16) 1 E-30 GP/ Bushing 2 E-31 GP/ Needle Bearing 0 E-32 GP/ Washer 0 E-33 GP/ Crank 0 E-34 GP/ Screw (M6x1,0x1,4) 0 E-35 GP/ Screw (M5x0,8x12) 0 E-36 GP/ Oil Felt 1 E-37 GP/ Needle Bar Connecting Link Guide 1 E-38 GP/ Screw (M4x0,7x6) 2 E-39 GP/ Oil Felt 1 E-40 GP/ Holder 3 E-41 GP/ Screw (M4x0,7x4,5) 2 E-42 GP/ Needle Bar Holder 1 E-43 GP/ Needle Bar Bushing 1 E-44 GP/ Needle Bar Bushing 1 20
21 anita-b Thread Take-Up Lever Mechanism F 21
22 anita-b Thread Take-Up Lever Mechanism F Ref.No. Part No. Name of Part Q ty F-1 GP/ Thread Take-up Assy 1 F-2 GP/ Take-up Lever Support Stud 1 F-3 GP/ Washer 2 F-4 GP/ Needle Bearing 2 F-5 GP/ Take-up Frame 1 F-6 GP/ Take-up Crank Pin 1 F-7 GP/ Bushing 1 F-8 GP/ Take-up Lever 1 F-9 GP/ Ball Bearing 1 F-10 GP/ Ball Bearing 2 F-11 GP/ Take-up Lever 1 F-12 GP/ Washer 1 F-13 GP/ Screw (M4x0,7x13,5) 1 F-14 GP/ Retaining Ring 2 F-15 GP/ Screw (M4x0,7x12,5) 1 F-16 GP/ Needle Bar Connecting Stud 1 F-17 GP/ Needle Bar Connecting Crank Rod 1 F-18 GP/ Washer 1 F-19 GP/ Needle Bearing 1 F-20 GP/ Needle Bar Guide Slide Block 1 F-21 GP/ Bushing 1 F-22 GP/ Screw (M5x0,8x8) 3 22
23 anita-b Roller Presser Foot Mechanism G1 23
24 anita-b Roller Presser Foot Mechanism G1 Ref.No. Part No. Name of Part Q ty G1-1 GP/ Roller Preser Assy (Large) 1 G1-2 GP/ Roller Preser Assy (Middle) 1 G1-3 GP/ Roller Preser Assy (Small) 2 G1-4 GP/ Spring Washer 2 G1-5 GP/ Pin 1 G1-6 GP/ Gear 1 G1-6-1 GP/ Gear Presser Shaft 1 G1-6-2 GP/ Gear 1 G1-7 GP/ Gear 1 G1-7-1 GP/ Gear Presser Shaft 2 G1-7-2 GP/ Gear 1 G1-8 GP/ Gear 1 G1-8-1 GP/ Gear Presser Shaft 1 G1-8-2 GP/ Gear 2 G1-9 GP/ Retaining Ring 1 G1-10 GP/ Ball Bearing 2 G1-11 GP/ Retaining Ring 1 G1-12 GP/ Roller Presser Bracket 1 G1-13 GP/ Roller Presser Bracket 1 G1-14 GP/ Roller Presser Bracket 1 G1-15 GP/ Screw (M2,5x0,45x6) 1 G1-16 GP/ Washer 1 G1-17 GP/ Guide Seat 1 G1-18 GP/ Guide Seat 1 G1-19 GP/ Guide Seat 1 G1-20 GP/ Screw (M4x0,7x8) 1 24
25 anita-b Presser Foot Bar Mechanism G2 25
26 anita-b Presser Foot Bar Mechanism G2 Ref.No. Part No. Name of Part Q ty G2-1 GP/ Presser Bar Bushing (Upper) 1 G2-2 GP/ Screw (M5x0,8x6) 1 G2-3 GP/ Presser Bar Bushing (Upper) 1 G2-4 GP/ Presser Bar Holder 1 G2-5 GP/ Screw (M6x0,75x8) 2 G2-6 GP/ Presser Bar Bushing (Lower) 1 G2-7 GP/ Screw (M6x1,0x8) 1 G2-8 GP/ Roller Presser Holder 1 G2-9 GP/ Roller Presser Holder 1 G2-10 GP/ Screw (M4x0,7x8) 1 G2-11 GP/ Spring 1 G2-12 GP/ Angle 1 G2-13 GP/ Screw (M4x0,7x9) 1 G2-14 GP/ Cover 1 G2-15 GP/ Screw (M5x0,8x7) 2 G2-16 GP/ Presser Foot Lifter 1 G2-17 GP/ Screw (M5x0,8x6) 1 G2-18 GP/ Bushing 1 G2-19 GP/ Cam Shaft 1 G2-20 GP/ Screw (M8x0,75) 1 G2-21 GP/ Presser Plate Spring 1 G2-22 GP/ Screw (M6x1,0) 1 G2-23 GP/ Stud 1 G2-24 GP/ Screw (M6x1,0x8) 1 G2-25 GP/ Screw (M6x1,0) 1 G2-26 GP/ Spring 1 G2-27 GP/49657 Gauge/vodič (2,4mm-3/32") *1 G GP/ Gauge/vodič (1,6mm-1/16") *1 G2-28 GP/ Screw (M4x0,7x6) 1 G2-29 GP/ Knee Lifter Connecting Lever 1 G2-30 GP/ Spring Plate 1 G2-31 GP/ Pin 1 G2-32 GP/ Bushing 1 G2-33 GP/ E-Ring 1 G2-34 GP/118536A Lifting Lever Assy 1 G2-35 GP/ Bushing 1 G2-36 GP/400-MG Support/opěra 1 26
27 anita-b Right Side Hook Mechanism H1 27
28 anita-b Right Side Hook Mechanism H1 Ref.No. Part No. Name of Part Q ty H1-1 GP/G-400-T Hook Complete With Bobbin Case 1 H1-1-2 GP/G400T-017 Tension Spring Fastening Screw 1 H1-1-3 GP/G400T-018 Tension Spring Adjustment Screw 1 H1-1-8 GP/G400T-355 Needle Guard Fastening Screw 2 H1-1-9 GP/G400T-005 Hook Gib Fastening Screw 3 H1-2 GP/010079AL Bobbin 1 H1-3 GP/ Screw 1 H1-5 GP/ Oil Felt 1 H1-6 GP/ Rotating Hook Opener Bracket 1 H1-7 GP/SM Rotating Hook Opener 1 H1-8 GP/ Screw (M3x0,5x6) 2 H1-9 GP/694 ZZ Ball Bearing 1 H1-9-1 GP/ Driver 1 H1-10 GP/ Driver 1 H1-11 GP/ Screw (M4x0,7x10) 1 H1-12 GP/ Washer (35,5x26x1mm) 1 H1-13 GP/ Hook Driver 1 H1-14 GP/ Hook Shaft 1 H1-15 GP/ Needle Bearing 1 H1-16 GP/ Needle Bearing 1 H1-17 GP/ Feed Wheel Shaft 1 H1-18 GP/ Bushing 1 H1-19 GP/ Retaining Ring (26mm) 1 H1-20 GP/ Bushing 1 H1-21 GP/SM Bushing 1 H1-22 GP/SM Screw 1 H1-23 GP/ Screw (M6x0,75x6) 4 H1-24 GP/ Collar 1 H1-25 GP/ Washer (0,5) 2 H GP/ Washer (0,1) 1 H GP/ Washer (0,15) 1 H GP/ Washer (0,2 1 H1-26 GP/ Bevel Gear (Small) 1 H1-27 GP/ Bevel Gear (Large) 1 H1-28 GP/ Screw (M6x0,75x4,5) 4 H1-29 GP/ Screw (M6x0,75x5) 2 H1-30 GP/ Gear Set 1 H1-31 GP/ Collar 1 28
29 anita-b Right Side Hook Post Mechanism I1 29
30 anita-b Right Side Hook Post Mechanism I1 Ref.No. Part No. Name of Part Q ty I1-1 GP/SM2-3.1M Hook Post/chapačový sloupek 1 I1-2 GP/ Srew/šroub(M3x0.5x6) 2 I1-3 GP/SM4-26 Holder/držák pevného nože 1 I1-4 GP/ Screw/šroub(M4x0,7x6) 1 I1-5 GP/ Stud/excentr 1 I1-6 GP/ Screw/šroub(M5x4.5) 1 I1-7 GP/SM4-4 Counter Knife/Pevný nůž 1 I1-8 GP/ Hold Spring/přidržovací perko 1 I1-9 GP/SM4-24 Pin/excentrický čep 1 I1-10 GP/ Spring Plate/pružná západka 1 I1-11 GP/ Screw/šroub(M3x0,5x6) 1 I1-12 GP/ Screw/šroub(M6x1x15) 4 I1-13 GP/ Washer/podložka 4 I1-14 GP/ Ball Bearing/kul.ložisko 1 I1-15 GP/ Collar/pouzdro 1 I1-16 GP/ Screw/šroub (M x0,75x4,5) 2 I1-17 GP/ Cover Plate 1 I1-1 GP/SM4-25 Screw/šroub 1 I1-2 GP/SM Moving Knife/pohyblivý nůž 1 I1-3 GP/SM2-3.3 Trimming Shaft/odstřihová hřídel 1 I1-4 GP/SM2-3.6 Tube/trubka 1 I1-5 GP/SM2-3.5 Distance Ring/distanční kroužek 1 I1-6 GP/SM2-3.4 Housing/pouzdro 1 I1-7 GP/M4x5 Screw/šroub M4x5 DIN I1-8 GP/M4x8 Screw/šroub M4x8 DIN I1-9 GP/M4x8 Screw/šroub M4x8 DIN 84A 2 I1-10 GP/M2,5x6 Screw/šroub M2,5x6 DIN 84A 1 I1-11 GP/ Post Cap Assy/kryt chapače úplný 1 I1-30 GP/ Screw 2 I1-31 GP/ Pin/ čep 1 I1-32 GP/ Hinge/závěs 1 I1-33 GP/ Post Cap/kryt chapače 1 30
31 anita-b Left Side Post Mechanism I3 31
32 anita-b Left Side Post Mechanism I3 Ref.No. Part No. Name of Part Q ty I3-1 GP/ Cover Plate/kryt 1 I3-2 GP/ Screw/šroub(M3x0,5x6) 4 I3-3 GP/SM5-4.9M Support Plate/levý sloupek 1 I3-4 GP/ Washer/podložka 2 I3-5 GP/ Screw/šroub(M5x0,8x12) 2 I3-6 GP/ Screw/šroub(m6x1,0x14) 1 I3-7 GP/ Stud/čep 1 I3-8 GP/ Screw/šroub(M4x0,7x10) 1 I3-10 GP/ Washer/podložka 4 I3-11 GP/ Screw/šroub(M6x1,0x15) 4 I3-12 GP/ Collar/pouzdro 1 I3-13 GP/ Screw/šroub(M6x0,75x4,5) 2 I3-14 GP/ Ball Bearing/ložisko 1 I3-15 GP/ Cover Plate/kryt 1 I3-16 GP/ Screw/šroub(M4x0,7x10) 2 I3-17 GP/M2,5x4 Screw/šroub DIN I GP/SM4-14 Needle Plate Insert(needle hole 1,3mm) 1 I GP/SM4-15 Needle Plate Insert(needle hole 1,6mm) 1 I GP/SM4-16 Needle Plate Insert(needle hole 2,1mm) 1 I3-19 GP/SM4-13 Needle Plate/stehová deska 1 32
33 anita-b Knife Actuating Mechanism J 33
34 anita-b Knife Actuating Mechanism J Ref.No. Part No. Name of Part Q ty J-1 GP/SM4-20 Cam/vačka 1 J-2 GP/SM4-21 Holder/držák odstřihového magnetu 1 J-3 GP/SM2-1.3 Lever/páka 1 J-4 GP/SM2-1.2 Bracket/rameno 1 J-5 GP/SM2-1.6 Pin/čep 1 J-6 GP/SM2-1.7 Roller/kladka 1 J-7 GP/SM2-1.5 Plug/trn 1 J-8 GP/SM Ring/kroužek 1 J-9 GP/SM Stopper/doraz 1 J-10 GP/SM Base/podložka 1 J-11 GP/SM2-3.2 Trimming bracket/odstřih. Rameno 1 J-12 GP/SM Rod/táhlo 1 J-13 GP/SM Base/podložka 1 J-14 GP/SM Screw/šroub 1 J-15 GP/SM2-1.9 Screw/šroub 1 J-16 GP/SM2-1.8 Screw/šroub 1 J-17 GP/SM Spring/pružina 1 J-18 GP/M4 Nut/matice M4 DIN J-19 GP/EMSA6112-B Solenoid/magnet EMSA 6112-B 1 J-20 GP/SM Pin/čep 1 J-21 GP/2,3 Locking plate for shaft/pojistný kroužek 2,3 DIN J-22 GP/M4x8 Screw/šroub M4x8 DIN 84A 2 J-23 GP/M6x22 Screw/šroub M6x22 DIN J-24 GP/M6 Nut/matice M6 DIN J-25 GP/M5 Nut/matice M5 DIN J-26 GP/M5x14 Screw/šroub M5x14 DIN J-27 GP/M5x12 Screw/šroub M5x12 DIN J-28 GP/SB PHS 5R Rod.end.bearing/kloubové ložisko SB PHS 5R 2 J-29 GP/M5x6 Screw/šroub M5x6 DIN J-30 GP/ Screw/šroub M6x0,75x
35 anita-b Needle Feed and Driven Roller Mechanism K1 35
36 anita-b Needle Feed and Driven Roller Mechanism K1 Ref.No. Part No. Name of Part Q ty K1-1 GP/SM Holder/držák 1 K1-2 GP/M5x12 Screw/šroub M5x12 DIN K1-3 GP/M5x16 Screw/šroub M5x16 DIN K1-4 GP/M5x30 Screw/šroub M5x30 DIN K1-5 GP/SM Shaft/hřídel 1 K1-6 GP/SM Crank/vidlice 1 K1-7 GP/SM Pin/čep 1 K1-8 GP/K8x11x10TN Needle Bearing/jehl.věnec K8x11x10TN 4 K1-9 GP/SM Connecting Rod/ojnice 30 1 K1-10 GP/SM Pin/čep 1 K1-11 GP/BN 1976 Washer/podložka DIN 988,8x14x0,5 6 K1-12 GP/SM Rod/páka 1 K1-13 GP/M6x16 Screw/šroub M6x16 DIN K1-14 GP/M5 Nut/matice M5 DIN K1-15 GP/SM Pin/čep 1 K1-16 GP/SM5-1.5 Connecting Rod/ojnice 20 1 K1-17 GP/SM Pin/čep 1 K1-18 GP/SM Rod/rameno 1 K1-19 GP/K8x11x13TN Needle Bearing/jehl.věnec K8x11x13TN 1 K1-20 GP/SM Rod/táhlo 1 K1-21 GP/SM Rod/rameno 1 K1-22 GP/M5x10 Screw/šroub M5x10 DIN K1-23 GP/M4x4 Screw/šroub M4x4 DIN K1-24 GP/SM Pin/čep 1 K1-25 GP/SM Shaft/hřídel 1 K1-26 GP/HK0608 Needle Bearing/jehl.ložisko HK K1-27 GP/4 Locking Plate For Shaft/poj kroužek 4 DIN K1-28 GP/M5x14 Screw/šroub M5x14 DIN K1-29 GP/SM Washer/kroužek 1 36
37 anita-b Left Side Post and Lower Backtacking Feed Mechanism K2 37
38 anita-b Left Side Post and Backtacking Feed Mechanism K2 Ref.No. Part No. Name of Part Q ty K2-1 GP/SM Rod/Rameno SB 1 K2-2 GP/SM Rod/Rameno SJ 1 K2-3 GP/SM Rod/rameno ZJ 1 K2-4 GP/SM Rod/rameno ZB 1 K2-5 GP/M5x12 Screw/šroub M5x12 DIN K2-6 GP/ Screw/šroub (M4x10) 8 K2-7 GP/ Oil Felt/plstěná podložka 8 K2-8 GP/SM5-S2.5 Rod/táhlo SB-ZJ 2 K2-9 GP/SM5-S2.6 Rod/táhlo SJ 1 K2-10 GP/SM5-S2.7 Rod/táhlo ZB 1 K2-11 GP/SM Bushing/pouzdro B 2 K2-12 GP/SM Bushing/pouzdro J 2 K2-13 GP/HF1616 Needle Bearing/volnoběžné pouzdro HF K2-15 GP/SM5-S21 Shaft-Set/Hřídel úplná 1 K2-16 GP/10x22/0,3 Washer/distanční podl. 10x22/0,3 DIN K2-17 GP/61900 Bearing/ložisko K2-18 GP/RB-3,5 Ball/kulička RB - 3,5 1 K2-19 GP/RB-2 Ball/kulička RB K2-20 GP/SM5-4.9M Support Plate/levý sloupek 1 K2-21 GP/M6x6 Screw/šroub M6x10 DIN K2-22 GP/SM3-23 Cover/kryt 1 K2-23 GP/M4x8 Screw/šroub M4x8 DIN
39 anita-b Upper Driven Roller Backtacking Feed Mechanism K3 39
40 anita-b Upper Driven Roller Backtacking Feed Mechanism K3 Ref.No. Part No. Name of Part Q ty K3-1 GP/SM5-S31N Shaft-Set/hřídel úplná 1 K3-3 GP/SM Washer/kroužek 1 K4-4 GP/SM Oil Felt/plstěný kroužek 1 K3-5 GP/ Washer/podl.dist. DIN 988,10x16/0,5(+0,3) 1 K3-6 GP/BR19 Locking Plate/poj.kroužek BR19 4 K3-7 GP/GE10E Bearing/kloubové ložisko GE 10 E 2 K3-8 GP/SM Holder/horní držák 1 K3-9 GP/3m6x20 Pin/kolík 3m6x20, DIN K3-10 GP/SM Rod/rameno 1 K3-11 GP/SM Pin/čep 1 K3-12 GP/M4 Nut/matice M4, DIN K3-13 GP/2,3 Locking Plate/poj.kroužek 2,3 DIN K3-14 GP/M5x12 Screw/šroub M5x12 DIN K3-15 GP/SM Washer/kroužek 1 K3-16 GP/SM3-16 Washer/podložka 3 K3-17 GP/HF1616 Needle bearing/volnoběžné pouzdro HF K3-18 GP/SM Bushing/pouzdro J 1 K3-19 GP/SM Bushing/pouzdro B 1 K3-20 GP/16 Locking Plate/poj.kroužek 16 DIN K3-21 GP/51100 Bearing/ložisko axiální K3-22 GP/SM Washer/kuželová podložka 1 K3-23 GP/SM Washer/kulová podložka 1 K3-24 GP/SM Holder/spodní držák 1 K3-25 GP/M5x16 Screw/šroub M5x16 DIN K3-28 GP/RB-3,5 Ball/kulička RB-3,5 1 K3-29 GP/RB-2,5 Ball/kulička RB-2,5 3 40
41 anita-b Telescopic Shaft Driven Roller Mechanism K4 41
42 anita-b Telescopic Shaft Driven Roller Mechanism K4 Ref.No. Part No. Name of Part Q ty K4-1 GP/SM Shaft/hřídel s kulovým kloubem 1 K4-2 GP/SM Spring/tlačná pružina 1 K4-3 GP/SM Shaft/hřídel 1 K4-4 GP/2,5m6x12 Pin/kolík 2,5m6x12 DIN K4-5 GP/SM Clutch/kloubová spojka 1 K4-6 GP/2m6x14 Pin/kolík 2m6x14 DIN K4-7 GP/M5x30 Screw/šroub M5x30 DIN K4-8 GP/SM Universal Joint 1 K4-9 GP/M4x4 Screw M4x4 DIN K4-10 GP/SM5-4 Complete set/kompletní hřídel ***Supplied only complete set SM5-4 42
43 anita-b Upper Shaft Driven Roller Mechanism K5 43
44 anita-b Upper Shaft Driven Roller Mechanism K5 Ref.No. Part No. Name of Part Q ty K5-1 GP/SM Holder/držák 1 K5-2 GP/ Crank/páka 1 K5-3 GP/ Link/táhlo 2 K5-4 GP/ Screw/šroub(M4x10) 4 K5-5 GP/ Oil Felt/plstěný kroužek 4 K5-6 GP/M5x12 Screw/šroub M5x12 DIN K5-7 GP/2,3 Locking Plate/poj.kroužek 2,3 DIN K5-8 GP/SM Upper side shaft/hřídel 1 K5-9 GP/ Bushing/pouzdro 2 K5-10 GP/ Needle Bearing/jehl.ložisko 2 K5-11 GP/ Collar/kroužek 1 K5-12 GP/ Screw/šroub(M6x4,5) 1 K5-13 GP/ Washer/poj.kroužek 4 K5-14 GP/SM Nut/matice 2 K5-15 GP/SM Rod/rameno 1 K5-16 GP/M4x10 Screw/šroub M4x10 DIN K5-17 GP/SM Pin/spodní čep 1 K5-18 GP/M4 Nut/matice M4 DIN934 1 K5-19 GP/SM Rod/táhlo 1 K5-20 GP/SM Bushing/puzdro 2 K5-21 GP/M5x14 Screw/šroub M5x14 DIN
45 anita-b Rods Lower Backtacking Mechanism K6 45
46 anita-b Rods Lower Backtacking Mechanism K6 Ref.No. Part No. Name of Part Q ty K6-1 GP/SM Holder/držák 1 K6-2 GP/SM Rod/páka 1 K6-3 GP/5m6x25 Pin/kolík 5m6x25 DIN 12771A 1 K6-4 GP/SM5-2.4 Bracket/podpěra 1 K6-5 GP/M6x40 Screw/šroub M6x40 DIN K6-6 GP/SM5-2.8 Nut/matice 1 K6-7 GP/SM Lever/táhlo 1 K6-8 GP/4 Washer/podložka 4 K6-9 GP/SM Spring/pružina 1 K6-10 GP/5x20 Washer/Podložka 5x20/1,5 BN K6-11 GP/M5x12 Screw/šroub M5x12 DIN K6-12 GP/4 Washer/pojistný kroužek 4 BN K6-13 GP/SM Rod/rameno 1 K6-14 GP/SM Pin/čep 1 K6-15 GP/SM5-4.2 Bushing/pouzdro 1 K6-16 GP/M4x10 Screw/šroub M4x10 DIN 963A 3 K6-17 GP/SM Rod/rameno 1 K6-18 GP/SM Lever/táhlo 1 K6-19 GP/SM Rod/rameno 1 K6-20 GP/M5x16 Screw/šroub M5x16 DIN K6-21 GP/M5 Nut/matice M5 DIN K6-22 GP/SM Bearing Surface/opěrka 1 46
47 anita-b Electric Accessory K8 47
48 anita-b Electric Accessory K8 Ref.No. Part No. Name of Part Q ty K8-1 GP/2x0,5 Cabel/vodič kruh.průřez 2x0,5,l=1,5m 1 K8-2 GP/2x0,5 Cabel/vodič kruh.průřez 2x0,5,l=1m 1 K8-3 GP/MATE-N-LOK Connector MATE-N-LOK 1 K8-3-1 GP/ MATE-N-LOK/kryt dutinek 2P/kab 1 K8-3-2 GP/ MATE-N-LOK/kryt kolíků 2P/kab 1 K8-3-3 GP/ MATE-N-LOK/dutinka/0,5-1,0 Sn 2 K8-3-4 GP/ MATE-N-LOK/kolík/0,5-1,0 Sn 2 K8-4 GP/2x0,35 Cabel/vodič kruh.průřez 2x0,35,l=1,25m 1 K8-5 GP/M4x8 Screw/šroub M4x8 DIN 84A 11 K8-6 GP/ Trough Insert/průchodka F07105 B-10 1 K8-7 GP/ Cable Belt/kabelový pásek 2,5mmx100mm 4 K8-8 GP/ Connector/konektor 2,5 2 K8-9 GP/ Isolator/smršťovací isolace 3,2mm,l=30mm 2 K8-10 GP/4504 Cabel Clamp/kabel.držák CCS 38-S8-M 4 K8-11 GP/4505 Cabel Clamp/kabel.držák CCS 50-S8-C 2 K8-12 GP/SM5-S41.18 Push Button/tlačítko zpátkování 1 K GP/SM Prism/upevňovací prizma 1 K8-13 GP/SM Holder/držák 1 K8-14 GP/M4x6 Screw/šroub M4x6 DIN 84A 2 K8-15 GP/M3x5 Screw/šroub M3x5 DIN 963A 2 K8-16 GP/M3 Nut/matice M3 DIN K8-17 GP/EMSA8215-B Solenoid/magnet EMSA 8215-B 1 K8-18 GP/SM Holder/konzola 1 K8-19 GP/M6x14 Screw/šroub M6x14 DIN K8-20 GP/M4x12 Screw/šroub M4x12 DIN K8-21 GP/SM Cover/kryt 1 K8-22 GP/SM Cover/kryt 1 K8-23 GP/SM Cover/kryt 0 K8-24 GP/SM Bracket/rameno 1 K8-25 GP/M6x14 Screw/šroub M6x14 DIN
49 anita-b Auto Presser Lifting Solenoid Mechanism L Ref. No. Part No. Name of Part Q ty L- 1 GP/AEVS072-4 Solenoid/magnet AEVS W 1 L- 2 GP/SM8-1 Plate/držák 1 L- 3 GP/SM8-2 Plug/trn 1 L- 4 GP/M5x10 Screw/šroub M5x10 DIN 963A 3 L- 5 GP/M5x14 Screw/šroub M5x14 DIN L- 6 GP/M8 Nut/matice M8 DIN L- 7 GP/118543A Crank Shaft/páka s čepem 1 L- 8 GP/ Screw/šroub (M5x12) 2 49
50 anita-b Bobbin Winder N1 Ref. No. Part No. Name of Part Q ty N1-1 GP/GU Bobbin Winder 1 N1-2 GP/GP O-Ring 22x7 1 N1-3 GP/SM Thread Tension 1 N1-4 GP/GU Bobbin Winder Bracket 1 N1-5 GP/GU Backet 1 N1-6 GP/GU /7 Knife 1 50
51 anita-b Accessories N2 51
52 anita-b Accessories N Ref.No. Part No. Name of Part Q ty N2-1 GP/ Accessory Bag 1 N2-2 GP/ Vinyl Cover 1 N2-3 GP/ Spanner 1 N2-4 GP/ Screw Driver (Small) 1 N2-5 GP/ Screw Driver (Middle) 1 N2-6 GP/ Screw Driver (Large) 1 N2-7 GP/134LR Needle 10 N2-8 GP/ Oiler 1 N2-9 GP/ Stitching Lenght Indicator 1 N2-10 GP/ Screw 1 N2-11 GP/ Head Cushion 2 N2-12 GP/010079AL Bobbin 4 N2-13 GP/ Bobbin Winder 1 N2-14 GP/ Spool Pin 1 N2-15 GP/FPL2 Thread Stand (2-Pole) 0 N2-16 GP/FPL3 Thread Stand (3-Pole) 1 N2-17 GP/ Spring 1 N2-18 GP/ Knee Lever Coupling 1 N2-19 GP/ Knee Lever Rod 1 N2-20 GP/ Knee Lever Assy 1 N2-21 GP/ Knee Lever Rod Assy 1 N2-22 GP/ Hinge Connection Seat 2 N2-23 GP/ Pin 2 N2-24 GP/ Hinge Pin 2 N2-25 GP/ Oil Pan 1 N2-26 GP/ Screw 6 N2-27 GP/ Head Rest Wood 1 N2-28 GP/ Housing Support Stud 1 N2-29 GP/ Belt Cover Set (Large) 1 N2-30 GP/ Belt Cover Set (Small) 1 N2-31 GP/ Wedge 1 N2-32 GP/ Screw 2 N2-33 GP/ Screw 2 52
53 53
LS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
SINGER 531B-8BL. From the library of: Superior Sewing Machine & Supply LLC
SINGER 53B-8BL PERSPECTIVE THREAD TENSION, GUIDE, NEEDLE PLATE i SINGER 4 THREAD TENSION, GUIDE, NEEDLE PLATE 3 Fig. No. Parts No. Quantity Name of Parts Fig. No. Parts No. Quantity Name of Parts 0698
TZl Please clarify Ref. No. and Parts No. as well as parts name When you place an order.
II -. TZl-.865.2 /...._J..... "Ill -.. Please clarify Ref. No. and Parts No. as well as parts name When you place an order.... ~.. Ref. No. N arne of Parts Part No. Ref. No. N arne of Parts Part No. 1
MACHINE PARTS CHART SINGER*
Form U3174 (Rev. 983) Part No. 643197 002 (Rev. 1) MACHINE PARTS CHART for SINGER* 220 220 U2 U3 * A Trademark of THE SINGER COMPANY Copyright 1980 THE SINGER COMPANY All Rights Reserved Throughout the
1 ~::~, ~~/"' v -\ K 1' SINGER* G.,~ I ~ ~" ""cj. [E>~i 1241~ D200A ~\ c:? ""' B ~ ~
SNGER* 431 D200A 544249 410672 505317-452 52454 ""cj 504094 ""', 410572-004 1 ::, 545901 549128...--- "''i:i K 1' 1241 549336 / 540549 /544980 t c:? 505151 505152 [E>i 504159-452 B--504083 ""' 0.;. ""'"
CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT, NEEDLE BAR AND FEED MECHANISM... 4 (3) SHUTTLE HOOK, BH AND FEED ADJUST MECHANISM...
11.1999. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT, NEEDLE BAR AND FEED MECHANISM... 4 (3) SHUTTLE HOOK, BH AND FEED ADJUST MECHANISM... 8 (4) PATTERN SELECTION MECHANISM... 10 (5) LAMP, THREAD
NEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.
NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0
From the library of: Superior Sewing Machine & Supply LLC
1. Base plate, Handle, and Oil 'Wick.,... ' J 205-201-01 A 205-1-01C WS-01-~ 51-0002 --.205-14-01 --- WP-0501 Lsi-50001 2. Covers -05-0-01 A 205-0-00 205-0-00B From the library of: Superior Sewing 2 Machine
Y A O H A N MODEL ONE THREAD
Y A O H A N MODEL ONE THREAD N00A( ) N0A( TWO THREAD ) ONE THREAD HIGH SPEED N00H( ) TWO THREAD HIGH SPEED N0H( ) P OR T A B L E B A G C L OS E R P A R T S B OOK Y AO HAN INDUS TR IE S C O., L TD. 00.0.
Singer From the library of: Superior Sewing Machine & Supply LLC
Singer 69-14 LST OF PARTS COMPLETE NO. 69=14 MACHNE The Singer Manufacturing Co. ) LST OF PARTS COMPLETE FOR No. 69=14 Machine Central Bobbin, makes 18 staying and three fastening or tying stitches in
PARTS LIST MODEL: HDEJ1800
First Edition: June 0 PARTS LIST 0 8 4 8 8 4 8 0 KEY PARTS NO. NO. DESCRIPTION 0400 Top cover (unit) 00 Top cover (unit) 0000 Top cover 4 40A04 Flip-top sewing instruction panel 000 Hinge rod (right) 00
488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
DT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher
DT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher Specifications DT3 - B291-060 - No. of needles & Needle gauge 7 Twin needle, 31.8 mm (1 1/4) 8 Twin needle, 34.9 mm (1 3/8) A 4 needle, 6.4-25.4-6.4
PARTS LIST MODEL DC4100
MODEL DC0 0 0 MODEL DC 0 KEY 0 0 PARTS 00 000 00000 000 00 0000 00000 000 00 0000 000 00 000 00000 000 000 000 000 000 0 00000 0 0000 0 0000 000 0000 00 00000 0000 0 0000 00000 00 00 00000 00000 0000 DESCRIPTION
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
PARTS REFERENCE LIST MODEL: M929D
Home Sewing Machine PARTS REFERENCE LIST MODEL: M929D CONTENTS (1) PRINCIPAL PARTS... 2 (2) NEEDLE BAR, FEED BAR AND PRESSER HOLDER... 4 (3) KNIFE AND LOOPER... 6 (4) LAMP, MOTOR AND ACCESSORY... 8-1 -
SERVICE MANUAL & PARTS LIST MODEL: MC400E
First Edition: February SERVICE MANUAL & PARTS LIST MODEL: MC00E PARTS LIST MODEL: MC00E 0 0 MODEL: MC00E KEY PARTS NO. NO. DESCRIPTION 0 0 0B0 000 0A0 0A0 000 000 0 000 0 0000 0000 000 00 0 0 00 A0 0B0
12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
SERVICE MANUAL AND PARTSLIST
SERVICE MANUAL AND PARTSLIST Next 20 CONTENTS WHAT TO DO WHEN... 1~3 SERVICE ACCESS FACE COVER... 4 TOP COVER... 4 BASE COVER... 5 REAR COVER... 6 FRONT COVER... 7 MECHANICAL ADJUSTMENT NEEDLE THREAD TENSION...
Machine No. 62=53 LIST OF PARTS COMPLETE. Cp'2.- THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Cp'2.- e NUMIJEKINO DEPAilTMENT AuilEST 7, 1014 LIST OF PARTS COMPLETE A Machine No. 62=53 %= THE SINGER MANUFACTURING COMPANY iiv ^ --. : ' '', - - - -- W. ;.y -::- -^=v c v; > >,- -- ^/;c. V ^. r,.'
SINGER. PARTS LIST DEARBORN BLIND STITCH MACHINE MODEL 12 SS-1 SINGER COMPANY OF CANADA LIMITED
SINGER. PARTS LIST DEARBORN BLIND STITCH MACHINE MODEL 12 SS1 SECTIONS MAIN SHAFT NEEDLE SHAFT FEED FRAME SWING PLATE SKIP CONTROL MACHINE GEAR ASSEMBLY LOOPER ROD REGULATING KNEE LIFT AND CRANK HEAD NEEDLE
YAO HAN 耀瀚股份有限公司 YA O H A N I N D U S T R I E S C O., LT D. 手提式縫口袋機 YA O H A N I N D U S T R I E S C O., LT D.
耀瀚股份有限公司 YA O H A N I N D U S T R I E S C O., LT D. YAO HAN MODEL ONE THREAD F300A ( 單線 ) TWO THREAD F302A ( 雙線 ) 手提式縫口袋機 PORTABLE BAG CLOSER PARTS BOOK 零件本 2005.09.26 耀瀚股份有限公司 YA O H A N I N D U S T R
HEADSTOCK (CASTNG & CONTROLS)
HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR
MITSUBISHI SEWING MACHINE PARTS CATALOG
From the library of: Superior Sewing Machine & Supply LLC V \ V. 3 ) MITSUBISHI SEWING MACHINE PARTS CATALOG Model DH-400 INDEX 1. 2^ b!5 pp Arm bed & its accessories V40-1 2. ±.$4, Upper shaft & needle
PARTS REFERENCE LIST MODEL: BLDC2 BL200A
Home Sewing Machine PARTS REFERENCE LIST MODEL: BLDC2 BL200A CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT / NEEDLE BAR, PRESSER MECHANISM... 4 (3) FEED, ROTARY HOOK / THREAD CUTTING MECHANISM... 6
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
CONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION
CONTENTS PRECAUTIONS BEFORE STARTING OPERATION ------------------------------------- 1 PREPARATION FOR OPERATION 1. Adjustment of needle bar stop position ---------------------------------------------------------
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
I INDUSTRIAL SEWING & CUTTING EQUIPMENT
CONSOLDAT D SEWNG MACHNE CORP. NDUSTRAL SEWNG & CUTTNG EQUPMENT CONSOLDATED SEWNG MACHNE CORP. NDUSTRAL SEWNG & CUTTNG EQUPMENT 400 VETERANS BLVD, CARLSTADT, NJ 07072 CONTENT Operation nstruction 1. Brief
PARTS L ST TME-DC ) P-CD03-E. From the library of: Superior Sewing Machine & Supply LLC
PARTS L ST TME-DC 9 6 0 4) V P-CD03-E 91 80 @r0 D Mmm (9604 TME-DC ARM I CD-5-1 RefNo. Description Part No. Remark RefNo. Description Part No. Remark 2 Taper Pin 6P*25L 39 Flat Rllister Head Screw SM601824CC00
S-85SCH
4411-4423-4432-4443-4452 5511-5523-5532-5554 44S-85SCH Service Manual 104 73 14-26 2014-02-24 CONTENTS 1. Names of principal parts...2 2. Removing methods of external parts 2-1 Sewing table...3 2-2 Face
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
SERVICING MANUAL 419S/423S
SERVICING MANUAL 415 419S/423S TROUBLESHOOTING PROBLEM CAUSE REMEDY REFERENCE 1. SKIPPING 1. NEEDLE IS NOT INSERTED INSERT THE NEEDLE PROPERLY. STITCHES PROPERLY. 2. NEEDLE IS BENT OR WORN. CHANGE THE
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
Parts list. 10 Oct SVP Worldwide - All rights reserved.
Parts list 2016 SVP Worldwide - All rights reserved. 10 Oct 2016 A 13 2 1 68003741 Cover CSU Cpl 2 68000014 Keyboard Cpl Sewing Head 3 68002540 Pile Seal 4 411966803 Screw PT 3x12 FZB 5 411966828 Screw
Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
Parts list. From Product number xx MARCH SVP Worldwide - All rights reserved.
Parts list 01 SVP Worldwide - All rights reserved. From Product number 971-xx 0 MARCH 01 A 1 9 7 8 10 1 11 1 1 1 19 18 17 1 0 1 1 7 8 0 1 1 9 1 19810 PRE -TENSION UNIT 17901 REEL PIN 1701 SPRING, REEL
Section A Gear Box September A
Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000
BENT-ZN BENT-ZQ PARTS BOOK FOR MODELS MANUFACTURED IN THE USA
BENT-ZN BENT-ZQ PARTS BOOK FOR MODELS MANUFACTURED IN THE USA Copyright 3/01 Barudan America, Inc. 29500 Fountain Parkway Solon, Ohio 44139 USA Part Numbers are subject to change due to continuing improvements.
CONSOLIDATED SEWING MACHINE CORP. I.. INDUSTRIAL SEWING & CUTTING EQUIPMENT. Model 106R INSTRUCTION MANUAL & PARTS BOOK
CONSOLDATED SEWNG MACHNE CORP... NDUSTRAL SEWNG & CUTTNG EQUPMENT Model 06R NSTRUCTON MANUAL & PARTS BOOK Table of Contents. ntroduction.... 2. Main specifications.... 3. nstallation and preparation....
for SINGER Copyright :s: SINGER SEWING MACHINE COMPANY All Rights Reserved Throughout The World
Form U6290 17931 Part No. 379453-002 Printed 1n Japan MACHINE PARTS CHART for SINGER 300U101A Copyright :s:- 1993 SINGER SEWING MACHINE COMPANY All Rights Reserved Throughout The World :"/UMERICAL LIST
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
Parts List: Head Assembly
Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
PARTS CATALOGUE FOR PROFESSIONAL EMBROIDERY MACHINE PR600 PR600C
PARTS CATALOGUE FOR PROFESSIONAL EMBROIDERY MACHINE PR600 PR600C 10. 2003. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT MECHANISM... 4 (3) NEEDLE BAR MECHANISM... 6 (4) NEEDLE BAR CHANGE MECHANISM...
SERVICE MANUAL PARTS LIST MODEL: NH40
SERVICE MANUAL & PARTS LIST MODEL: NH40 CONTENTS What to do when... 1-3 SERVICE ACCESS Face Cover... 4 Bed Cover... 5 Free-arm Cover... 6 Front Cover... 7 Rear Cover... 8 MECHANICAL ADJUSTMENT Presser
LONSEW. model. en 2230 R LIST OPERATING ~IONS' P~RTS CONSOLIDATED SEWING MACHINE CORP. COP RIGHT 1989 CONSOLIDATED SEWING MACHINE CORPORATION
/ OPERATING ~IONS' P~RTS LIST LONSEW CONSOLIDATED SEWING MACHINE CORP. model en 2230 R CONSOLIDATED SEWING MACHINE CORP. COP RIGHT 1989 CONSOLIDATED SEWING MACHINE CORPORATION SPECIFICATIONS -CON SEW Model
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
SERIES I MILLING MACHINES
INSTALLATION, OPERATION, MAINTENANCE, AND PARTS LIST SERIES I MILLING MACHINES TP5260 Revised: August 29, 2005 Manual No. M-450 Litho in U.S.A. Part No. M -0009500-0450 June, 2003 MAINTENANCE PROCEDURES
EXPLODED PARTS LIST VSS 60
Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506
FBX1104P FBX1104 FBX1106P FBX1106
FBX1104P FBX1104 FBX1106P FBX1106 Second edition : September 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's FBX Series. Read and study this instruction manual carefully before
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
PARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
Illustrated Parts: Model 853
Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
MAIN PARTS
MAIN PARTS 7 8 9 10 11 12 13 1 2 3 17 4 5 6 01 02 03 04 05 12 23 34 45 56 13 24 35 46 57 14 25 36 47 58 15 16 26 27 37 38 48 49 59 60 06 07 08 09 10 17 18 28 29 39 40 50 51 61 62 19 30 41 52 63 20 21 31
Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
PARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
PARTS REFERENCE LIST MODEL: 2340CV
Home Sewing Machine PARTS REFERENCE LIST MODEL: 2340CV Published: Sep.,2003 Revised: Mar.,2014 MODEL LIST Model Countries (Added Date) 2340CV CAN, GUF (Apr / 2011) 2340CV MYS (May / 2011) 2340CV HKG (Mar
SERVICE MANUAL. Sewing Machine. Copyright 1976 The Singer Company Aii Rights Reserved Throughout the World *A Trademark of THE SiNGER COMPANY
1 SERVICE MANUAL SINGER Sewing Machine 121D200A Copyright 1976 The Singer Company Aii Rights Reserved Throughout the World *A Trademark of THE SiNGER COMPANY Form 21624 (876) Printed In U.S.A. LUBRICATION
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
CONTENTS: 1. General safety instructions Introduction... 1
CONTENTS:. General safety instructions.... Introduction.... Head of the sewing machine.... Hook and hook box..... Description.. Height setting of the hook.. Setting the distance of the hook from the needle..
(251) Printed in U. S. A. LIST PARTS SINGER. MACHINE No. I68wl0l THE SINGER MANUFACTURING. *A Trade Mark of THESINGER MANUFACTURING COMPANY
(251) Printed in U. S. A. LIST OF PARTS SINGER MACHINE No. I68wl0l THE SINGER MANUFACTURING COMPANV *A Trade Mark of THESINGER MANUFACTURING COMPANY y INSTRUCTIONS FOR OILING To ensure easy running and
Parts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
Instructions for service
Instructions for service 8 - Minerva Boskovice, a.s., Sokolská 0, CZ - 80 7 Boskovice Tel.: +0--,, Fax: +0-- http://www.minerva-boskovice.com Edition: 0/00 Printed in Czech Republic S7 0008 CONTENTS:.
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.
PARTS REFERENCE LIST MODEL: PE780D/PE770 NV750E/NV780D
Home Sewing Machine PARTS REFERENCE LIST MODEL: PE780D/PE770 NV750E/NV780D CONTENTS (1) MAIN FRAME / COVER... 2 (2) UPPER SHAFT / NEEDLE BAR / PRESSER FOOT UNIT... 4 (3) FEED / THREAD CUTTING UNIT... 6
DB Four Needle Double Chain stitcher. Specifications. 4 needles. *A needle gauge for 60 is U1401 only. DB /
DB-2810 Four Needle Double Chain stitcher Specifications 4 needles A Specifications No. needle of No of thread Needle size (UY113GS) Max. stitch length (mm) Height of presser foot (mm) Max. sewing speed
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS30 MIXER ML-134462 ML-134463 FORM 43181 Rev. A (April 2014) F-43181 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT HUB
Operation Manual GF MH/L38 GF MH/L38 GF MH/L38 GF MH/L38
Operation Manual GF-137-443 MH/L38 GF-137-448 MH/L38 GF-237-443 MH/L38 GF-237-448 MH/L38 ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 fax: +420 516 452 751 e-mail:
PFAFF. rom the library of: Superior Sewing Machine & Supply LLC. Service Manual Justieranl. engi. 7.92
PFAFF 5642 Service Manual 296-12-13925 Justieranl. engi. 7.92 Notes on safety The machine must only be commissioned in full knowledge of the instruction book and operated by persons with appropriate training.
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
LIST PARTS. MAC~INE No. 410wl0 ** A TRACE MARK OF THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Form 3021w --- - -- -- (250) Printed in U. S. A. LIST OF PARTS MAC~INE No. 410wl0 ** A TRACE MARK OF THE SINGER MANUFACTURING COMPANY INSTRUCTIONS FOR OILING To ensure easy running and prevent unnecessary
SERVICE MANUAL FOR DT4-B281 FOUR NEEDLE DOUBLE CHAIN STITCHER WITH PULLER. From the library of: Superior Sewing Machine & Supply LLC
SERVICE MANUAL FOR DT4-B281 FOUR NEEDLE DOUBLE CHAIN STITCHER WITH PULLER Table of Contents [A] Model Plate Display... 1 [B] Specifications... 2 [C] Description of Mechanism... 3 [) Needle bar mechanism...
SINGLE HEAD PARTS LIST VERSION:03000V1. RiCOMA(Shenzhen)Co.,Ltd.
SINGLE HEAD PARTS LIST VERSION:03000V1 RiCOMA(Shenzhen)Co.,Ltd. INDEX 01 TABLE GUARD COVER 02 02 ROTARY HOOK BASE 04 03 TRIMMING PART 06 03-2 TRIMMING PART 10 04 ARM 12 0 NEEDLE BAR DRIVING PARTS 16 06
CATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
OPERATING INSTRUCTIONS 3421UX VETERANS BLVD, CARLSTADT, NJ 07072
OPERATING INSTRUCTIONS 3421UX5-1 400 VETERANS BLVD, CARLSTADT, NJ 07072 CONTENTS DESCRIPTION... 3 OPERATOR INFORMATION... 5-8 INSTALLATION...... 4 ADJUSTMENT... 8-17 LUBRICATION... 5 INDEX Description
Brother Industries, Ltd. Nagoya, Japan
4. 2001. This service manual has been compiled for explaining repair procedures of the MODEL XL-6562, XL6452, XR- 46. This was produced based on up-to-date product specifications at the time of issue,
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
FBX-PA-2AC. Third edition : April No
FBX-PA-2AC Third edition : April 2006 No. 060058 INTRODUCTION Thank you very much for purchasing Kansai Special FBX series. Read and study this Instruction Manual carefully before you start any of the
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
MK-7 Maintenance Manual Revision3 (Ver R02)
MK-7 Maintenance Manual Revision3 () 1. Features ------------------------------------------------------------------------------------ P2 2. Components -------------------------------------------------------------------------------
...r.smcefbdb. DNSEWe CONSOLIDATED SEWING MACHINE CORP. L INDUSTRIAL SEWING & CUTTING EQUIPMENT OPERATING INSTRUCTIONS. and PARTS LIST.
...r.smcefbdb DNSEWe CONSOLIDATED SEWING ACHINE CORP. L INDUSTRIAL SEWING & CUTTING EQUIPENT OPERATING INSTRUCTIONS and PARTS LIST for CONSEW ODELS 18 and 118 INDUSTRIAL SEWING ACHINES IDA TED SEWING ACHINE
From the library of: Superior Sewing Machine & Supply LLC
CONTENTS ~MECHANISM~.... ~ASSEMBLY~... 14 OJ Upper shaft and needle bar mechanism OJ Needle bar... 14 [I] Lower shaft and rotary hook [I] Feed mechanism (8706 8707)... 15 mechanism... I1J Feed mechanism
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS40 MIXER ML-134476 ML-134477 ML-141002 FORM 43182 Rev. A (April 2014) F-43182 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT