READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
|
|
- Sophia Sims
- 5 years ago
- Views:
Transcription
1 READ THIS FIRST Model G ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) or The following change was recently made to this machine since the owner's manual was printed: Headstock hex bolts replaced with square head bolts. Aside from this information, all other content in the owner's manual applies and MUST be read and understood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference. For questions or help, contact our Tech Support at (570) or New Headstock Bolts V2 217 G0728 & G0729 Parts REF PART # DESCRIPTION 211V2 P V2 SQUARE BOLT M X 35 V V2 P V2 FLAT WASHER 10MM V V2 P V2 HEX NUT M V V2 P V2 SQUARE BOLT M X 40 V V2 213V2 212V2 214V2 G0730 & G0731 Parts REF PART # DESCRIPTION 211V2 P V2 SQUARE BOLT M X 40 V V2 P V2 LOCK WASHER 12MM V V2 P V2 HEX NUT M V V2 P V2 SQUARE BOLT M X 45 V COPYRIGHT MARCH, 2017 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #MN18825 PRINTED IN TAIWAN
2 G0730 & G0731 Head Models G (Mfg. Since 11/11)
3 G0730 & G0731 Head Parts List 101 P SPINDLE NUT 131 P SPINDLE COLLAR 102 P SPANNER LOCK WASHER 132 P LOCK KNOB SHAFT 103 P SPINDLE PULLEY 133 P LOCK BLOCK SLEEVE 104 P SPLINE SLEEVE 134 P COMPRESSION SPRING 105 P BEARING COVER 135 P LOCK PLUNGER SMALL 106 P BALL BEARING 6209ZZ 136 P LIMIT BLOCK SCREW 107 P EXT RETAINING RING 45MM 137 P DOWNFEED LOCK RING 108 P INT RETAINING RING 85MM 138 P DOWNFEED STOP RING 109 P HEAD CASTING 139 P QUILL DOG 110 P HEX NUT 1/ P PHLP HD SCR M5-.8 X P LOCK WASHER 1/2 141 P HANDWHEEL 112 P HEX BOLT 1/2-13 X 1-1/2 142 P HANDLE 5/16-18 X 1/2 113 P GEAR SHAFT 143 P GRADUATED DIAL 114 P TORSION SPRING 144 P LOCKING THUMB SCREW 5-.8 X P END CAP 145 P SPANNER NUT 9/ P EXT RETAINING RING 19MM 146 P THRUST BEARING P HANDLE LEVER 147 P SLEEVE 118 P KNOB 1/ P WOODRUFF KEY 5 X P CAP SCREW M X P WORM SHAFT 120 P HANDLE BASE 150 P COUPLING WORM GEAR 121 P CAP SCREW M5-.8 X P COMPRESSION SPRING 122 P SET SCREW M6-1 X P WOODRUFF KEY 6 X P OIL CUP 153 P COUPLING 124 P BALL BEARING 6206ZZ 154 P END CAP 125 P SPINDLE QUILL 155 P PHLP HD SCR M5-.8 X P SPANNER NUT 35MM 156 P KNURLED KNOB 127 P ANGULAR CONTACT BEARING P PHLP HD SCR M5-.8 X P BEARING SPACER LARGE 158 P KEY 7 X 7 X P BEARING SPACER SMALL 159 P LOCK HANDLE 130 P SPINDLE 160 P DRAWBAR 7/16-20 X 12 W/NUT Model G (Mfg. Since 11/11) -49-
4 G0730 & G0731 Drive System P KEY 5 X P HEX BOLT 1/2-13 X 1-3/4 202 P V-BELT B P MOUNTING PLATE 203 P SET SCREW M6-1 X P BRACKET PIVOT PIN 204 P MOTOR PULLEY 217 P TURRET 205 P CAP SCREW M X P UPPER BELT COVER 206 P FLAT WASHER 8MM 219 P KNOB 3/8-16 X 1/2 207 P MOTOR 1-1/2HP 110V/220V 1-PH 220 P CAP SCREW M5-.8 X P MOTOR FAN 221 P FLANGE COVER P MOTOR FAN COVER 222 P BALL BEARING 6204ZZ P JUNCTION BOX 223 P PULLEY PIVOT STRD P TERMINAL BAR 4P 224 P PULLEY P START CAPACITOR COVER 225 P LOWER BELT COVER P S CAPACITOR 400M 125V 3 X P HEX BOLT M6-1 X P CONTACT PLATE 227 P FLAT WASHER 6MM P CENTRIFUGAL SWITCH 1725RPM 228 P LATCH P BALL BEARING 6205ZZ 229 P PHLP HD SCR M3-.5 X P BALLBEARING 6203ZZ 230 P PHLP HD SCR M5-.8 X P RUN CAPACITOR COVER 231 P HEX NUT M P R CAPACITOR 50M 250V 232 P BRACE 208 P HEX BOLT M16-2 X P PHLP HD SCR M5-.8 X P HEX NUT M P COVER HINGE 210 P MOTOR BRACKET 235 P V-BELT B P HEX BOLT 1/2-13 X 1-1/2 236 P PULLEY SWIVEL 212 P LOCK WASHER 1/2 237 P PULLEY SWIVEL PIN 213 P HEX NUT 1/ P INT RETAINING RING 45MM -50- Models G (Mfg. Since 11/11)
5 G0730 & G0731 Table & Saddle G0730 Only G0731 Only P HANDLE 3/8-16 X 1/2 328 P SADDLE LOCK SCREW 302 P HEX NUT 5/ P TABLE LOCK SCREW 303 P SET SCREW M6-1 X P CAP SCREW M6-1 X P HANDWHEEL 332 P PHLP HD SCR M5-.8 X P GRADUATED DIAL 333 P WAY WIPER 306 P LOCKING THUMB SCREW 5-.8 X P SADDLE GIB 307 P CAP SCREW M6-1 X P CAP SCREW M5-.8 X P SPACER 336 P LIMIT SEAT 309 P EXT RETAINING RING 20MM 337 P CROSS LEADSCREW NUT 310 P BALL BEARING 6004ZZ 338 P CAP SCREW M X P CAP SCREW M6-1 X P SADDLE 312 P LEADSCREW BRACKET 340 P STOP BLOCK 313 P WOODRUFF KEY 5 X P PHLP HD SCR M5-.8 X P LONGITUDINAL LEADSCREW 342 P LONGITUDINAL NUT 315 P PHLP HD SCR M6-1 X P FLAT WASHER 6MM 316 P WAY COVER P POWER FEED ASSEMBLY 317 P WAY COVER HOLDER P RETAINING COLLAR 318 P TABLE P GRADUATED DIAL 319 P SPANNER NUT WASHER 20MM P CAP SCREW M6-1 X P SPANNER NUT P WOODRUFF KEY 3 X P HEX BOLT M X P STOP W/ PLUNGER ASSY 322 P LIMIT STOP P AUTO STOP SWITCH 323 P HEX NUT M P PHLP HD SCR M6-1 X P TABLE GIB P FLAT WASHER 6MM 327 P GIB ADJUSTMENT SCREW P POWER FEED ADAPTER GEAR Model G (Mfg. Since 11/11) -51-
6 G0730 & G0731 Knee & Base Models G (Mfg. Since 11/11)
7 G0730 & G0731 Knee & Base Parts List 401 P PHLP HD SCR M6-1 X P BALL BEARING 6204ZZ 403 P COLUMN 437 P VERTICAL LEADSCREW 405 P CAP SCREW M6-1 X P LEADSCREW BASE 406 P KNEE GIB 439 P BASE SIDE COVER 407 P GIB ADJUSTMENT SCREW 440 P PLUG 409 P KNEE 441 P BASE 410 P CHIP GUARD 442 P COVER 411 P PHLP HD SCR M3-.5 X P LIMIT TRACK 412 P KNEE LOCKING SCREW P SPLASH PAN 415 P SPANNER NUT 445 P HEX BOLT M X P SPANNER NUT WASHER 20MM 446 P LIMIT STOP 417 P BEVEL GEAR 447 P HEX NUT M P BALL BEARING 6004ZZ 448 P HEX BOLT M6-1 X P VERTICAL CRANK HOUSING 449 P HEX BOLT 1/2-13 X P CAP SCREW M6-1 X P LOCK WASHER 1/2 421 P WOODRUFF KEY 5 X P SPINDLE SWITCH KEDU ZH-HC P VERTICAL CRANK SHAFT 454 P COLUMN ACCESS PANEL 423 P EXT RETAINING RING 20MM 455 P PHLP HD SCR M6-1 X P CLUTCH 456 P POWER CORD 14G 3W 72" P SET SCREW M6-1 X P STRAIGHT LT STRAIN RELIEF 3/8 PT 426 P LOCKING THUMB SCREW 5-.8 X P MOTOR CORD 14G 5W 36" 427 P GRADUATED DIAL 460 P PHLP HD SCR M5-.8 X P CRANK HANDLE ARM 461 P ONE SHOT OILER ASSEMBLY 429 P EXT RETAINING RING 18MM 462 P ELBOW ADAPTER 430 P HANDLE 3/8-16 X 1/2 463 P PHLP HD SCR M5-.8 X P HANDWHEEL 464 P T-ADAPTER 432 P GRADUATED DIAL 465 P HEX NUT M P THRUST BEARING P OIL TUBING 4MM X 100MM 434 P BEARING HOUSING 467 P OIL TUBING 4MM X 340MM 435 P CROSS FEED LEADSCREW Model G (Mfg. Since 11/11) -53-
8 G0730 & G0731 Machine Labels P READ MANUAL 1.5W X 2.5H 606 G MACHINE ID LABEL (G0731) 602 P FACE SHIELD 1.5W X 2.5H 607 P GRIZZLY TOUCH UP PAINT GREEN 603 P DISCONNECT 110V 1.5 X 2.5H 608 P GRIZZLY TOUCH UP PAINT PUTTY 604 P DISCONNECT 110V 2.8 X 1.5H 609 P MODEL NUMBER G P ELECTRICITY 0.7W X 0.6H 609 P MODEL NUMBER G P MACHINE ID LABEL (G0730) 610 P ENTANGLEMENT HAZARD 2.5W X 1.5H Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800) or to order new labels Models G (Mfg. Since 11/11)
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
More informationMODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
More informationIMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationSECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
More informationSECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
More informationBase Machine Breakdown
SECTION 9: PARTS Base Machine Breakdown 154 151 10 149 8 180 9 11 152 148 12 6 146 153 23 150 7 144 4 147 142 181 2 140 100 139 145 1 143 36 14 141 19 15 182 31 137 16 32 18 13 3 34 16 19 17 41 41 50 38
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
More informationSECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
More informationColumn & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationSECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationSECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
More informationSECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
More informationSECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
More informationSECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationSECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
More informationSECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
More informationMODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
More informationST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
More informationSECTION 9: PARTS Base Machine
SECTION 9: PARTS Base Machine 8 2 6 7 9 10 1 23 13 31 14 37 32 33 15 18 16 144 142 141 19 17 148 124 125 140 126 127 128 123 131 129 130 120 49 38 39 40 41 50 51 44 46 47 48 43 52 53 54 55 56 57 58 64
More informationMain Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
More informationG0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
More informationSECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
More informationSECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
More informationREAD THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
More informationD('00 D]^ ('&'. G8IKJ
1 2 5 6 7 8 11 12 10 13 14 15 27 28 16 26 29 30 25 17 19 20 22 21 32 23 24 31 42 43 33 34 40 41 35 49 36 37 51 52 53 44 45 46 47 38 39 48 18-40- 1 XM1099001 CONTROL PANEL FACE 29 XPCAP50M CAP SCREW M5-.8
More informationREAD THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
More informationSECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
More informationSECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
More informationMain Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
More informationPARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
More informationSECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
More informationSECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
More informationSECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
More informationPARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationOperating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
More informationG0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
More informationModel W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-
3 144 1 143 119 1 4-1 14 140 13 4 1 1 4 14 11 7 108 134 131 13 14 100 1 8 16 9 80 93 40 14 146 39 Main Breakdown 133 117 130 10 3 19 3 11 10 9 38 9 7 6 4 13 7 134 16 138 141 Model W184 (For Machines Mfd.
More informationPARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
More informationSECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
More informationM1110 Mill with Dovetail Column. Headstock PARTS -33-
-33- M1110 Mill with Dovetail Column 1012 1082 1083 1001 1084 1002 1003 1005 1006 1007 1008 1009 1010 1011 1097 1096 1095 1019 1017 1094 1073 1015 1081 1016 1013 1014 1018 1020 1021 1022 1023 1024 1025
More informationG0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
More informationMODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
More informationSECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
More informationSECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
More informationHeadstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION
For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31
More informationHeadstock Cover PARTS. For Machines Mfg. Since 5/ REF PART # DESCRIPTION REF PART # DESCRIPTION
Headstock Cover 1 2 3 4 1 PSB10490001 HEADSTOCK OIL FILL CAP 3 PSB10490003 HEADSTOCK TOP COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 PSB10490004 TOP COVER GASKET -95- For Machines Mfg. Since 5/11 Headstock Controls
More informationSECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
More informationSECTION 9: PARTS Main
63 58 62 61A 66 65 67 66 67 58 58 59 64 SECTION 9: PARTS 162 161 Main 160 45 152 21 20 17 153 166 33 30A 31 32 135 144 133 136 34 35-2 35-3 131 16 130 134 139 15 35-1 137 14V2 151 140 38 143 150 18 142
More informationSECTION 9: PARTS. Table
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationSECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
More informationSECTION 9: PARTS. Stand REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Stand 1 2 6 8 3 4 5 7 9 6 13 11 28 27 17 15 14 28 27 17 29 18 20 21 22 26 1 2 4 6 3 5 10 9 12 15 16 12 23 17 25 24 9 21 1 P0716001 HANDLE GRIP 16 P0716016 RIGHT LONG TOP BRACE 2 P0716002
More informationSECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
More informationModel W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
More informationSECTION 10: PARTS. Body
SECTION 10: PARTS Body 1 P0715P001 EXTENSION WING 17 PS14M PHLP HD SCR M6-1 X 12 2 PCAP88M CAP SCREW M10-1.25 X 25 18 PLW03M LOCK WASHER 6MM 3 PLW06M LOCK WASHER 10MM 19 PWF06M FENDER WASHER 6MM 4 PW04M
More informationGEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
More informationSECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
More informationG0604 6" X 56" Jointer -43- Jointer Parts Breakdown
G0604 6" X 56" Jointer -43- Jointer Parts Breakdown Jointer Parts List 1 P0604001 HANDLE 43 PS68M PHLP HD SCR M6-1 X 10 2 P0604002 STUD 44 PW03M FLAT WASHER 6MM 3 P0604003 BUSHING 45 P0604045 BALL HANDLE
More informationSECTION 9: PARTS. Headstock Cover REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock Cover 1 2 3 4 1 P07400001 HEADSTOCK OIL FILL CAP 3 P07400003 HEADSTOCK COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 P07400004 HEADSTOCK COVER GASKET Please Note: We do our best to stock
More informationOperating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
More informationModel W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
More informationST1007/ST1012 PARTS ST1007
ST1007/ST1012 PARTS ST1007 Main Breakdown 30-7 30-8 30-10 30-9 30-1 30-3 30-6 30-2 30-4 30-5 82 83 84 77 78 79 80 30 60 59 58 62 64 61 46 44 63 66 65 55 56 26 45 27 45 27 25 43 37 41 50 42 72 73 51 53
More informationControl Rod & Brake -85- Model G0746/G0749 (Mfg. Since 3/13)
SECTION 8: PARTS Control Rod & Brake Control Rod 38 37 43 39 40 45 42 41 46 47 48 49 50 51 52 53 54 55 44 65 64 63 62 61 60 59 58 57 56 Brake 8 11 12 9 10 6 4 2 1 3 7 5 14 15 16 17 18 19 24 25 13 26 27
More informationSECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
More informationHeadstock and Bow Breakdown (G0613)
SECTION 8: PARTS Headstock and Bow Breakdown (G0613) -48- G0613/14 Swivel Mast Metal Cutting Bandsaw Parts List (G0613) 1 PSB64M CAP SCREW M10-1.5 X 25 43 P0613043 HANDLE 2 PW04M FLAT WASHER 10MM 44 P0613044
More informationHeadstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
More informationG8146Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26
More informationREAD THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z
READ THIS FIRST Models // G5851Z/G7213Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 12/16 and Owner's Manual Revised 03/06 For questions or help with this product contact Tech Support at (570) 546-9663
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationG8145Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8145Z Cabinet Breakdown & Parts List 14 11 12 16 18 8 10 15 17 9 13 21 22 19 20 24 25 7 4 3 5 6 23 2 19 20 27 28 26 1 1 P8145Z001 WHEEL DOOR LOWER 15 P8145Z015
More informationMain Parts. -4- Model G0555LANV (Mfg. Since 1/13) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 50 51 55 56 57 70 49 69 64 48 62 16 61 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34V2 194 186 6 68 24 115 116
More informationModel G " Planer/Moulder -33- G0477 Body Breakdown
Model G0477 15" Planer/Moulder -33- G0477 Body Breakdown 202 200 201 203 204 194 192 193 195 205 141 143 196 197 142 148 146 178 183 154 155 198 199 144 145 153 157 159 158 181 182 188 185 184 187 186
More informationMODEL SB1052F TURN-X 14" X 40" LATHE w/dro
MODEL SB1052F TURN-X 14" X 40" LATHE w/dro Manual Insert PHONE: (360) 734-1540 www.southbendlathe.com The Model SB1052F Lathe is the same machine as the Model SB1052 except for the following: Added a 2-Axis
More informationMain Breakdown. ST " Bandsaw -41-
Main Breakdown ST1000 14" Bandsaw -41- Main Breakdown Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 XST1000001 MOTOR 3/4HP 110/220V 48 XPHTEK4M TAP SCREW M4 X 8 1-1 XST1000001-1 FAN COVER
More informationSECTION 11: PARTS Main
SECTION 11: PARTS Main 55 48 21 20 22 7 18 19 23 17 17 18 21 22 14 15 16 32 33 34 26 27 50 49 13 47 35 2 18 20 55A 12 11 8 10 45 46 3 38 37 44 53 36 51 42 25 30 29 28 43 99 103 98 100 52 101 5 4 58 57
More informationBUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
More informationSECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
More informationW /2" Dovetail Machine PARTS. Table PARTS -36-
Table -36- Table Parts List 101 X1805101 FENCE 117 X1805117 INDICATOR TEMPLATE 1" & 2" 102 X1805102 SLIDING ROD 118 X1805118 INDICATOR TEMPLATE 1-1/2" & 2-1/2" 103 XPSB31M CAP SCREW M8-1.25 X 25 119 XPSB04M
More informationParts Breakdown G4030
Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -35- Parts Breakdown G4030-36- G4030 6 1 2" x 10" Metal-Cutting Bandsaw Parts Breakdown G4030 G4030 6 1 2" x 10" Metal-Cutting Bandsaw -37-
More informationPARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
More informationSECTION 8: PARTS Main Parts Breakdown
SECTION 8: PARTS 10 Main Parts Breakdown 6 1 7 9 2 4 8 15 60 61 62 63 64 110 11 12 13 18 19 21 17 22 23 24 27 14 25 34 65 35 66 67 83 84 36 37 68 69 85 70 80 86 38 73 81 87 89 82 90 71 72 74 91 79 88 92
More informationMain SECTION 10: PARTS
Main SECTION 10: PARTS Main Parts List 3 P0732003 MITER GAUGE ASSEMBLY 37 P0732037 TRANSFER PULLEY 3-1 P0732003-1 MITER GAUGE HANDLE 38 PR05M EXT RETAINING RING 15MM 3-2 PW01M FLAT WASHER 8MM 39 P6002-2RS
More informationMODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:
MODEL W1692 15" PLANER PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz COPYRIGHT AUGUST, 2003 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY
More informationREF PART # DESCRIPTION REF PART # DESCRIPTION
MODEL G0453P POLAR BEAR SERIES 15" PLANER Manual Insert Congratulations on your purchase of a Model G0453P Planer! The Model G0453P is the same machine as the Model G0453Z but with a "cool" new look and
More informationMODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT
MODEL G0632Z 16" X 42" VARIABLE- SPEED WOOD LATHE MANUAL INSERT The Model G0632Z is the same machine as the Model G0632 except it has a higher full-load current rating, a different inverter and inverter
More informationSECTION 10: PARTS. Body. 440V Conversion Kit
SECTION 10: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationG5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
More informationBase/Stand Model G9743 (Mfg. since 12/07) V V2 86V V2 89V
SECTION 9: PARTS 97 364 102 101 33 34 32 29 31 30 366 96 83 372 367 368 365 100 99 98 370 369 95 28 374 377 373 376 375 77 68 94 95 87V2 93 Base/Stand 1 2 62 61 78 26 27 15 16 17 79 25 76 88V2 9 21 18
More informationPage 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
More information