(251) Printed in U. S. A. LIST PARTS SINGER. MACHINE No. I68wl0l THE SINGER MANUFACTURING. *A Trade Mark of THESINGER MANUFACTURING COMPANY
|
|
- Doreen Nichols
- 5 years ago
- Views:
Transcription
1 (251) Printed in U. S. A. LIST OF PARTS SINGER MACHINE No. I68wl0l THE SINGER MANUFACTURING COMPANV *A Trade Mark of THESINGER MANUFACTURING COMPANY y
2 INSTRUCTIONS FOR OILING To ensure easy running and prevent unnecessary wear of the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B" or "TYPE D" OIL, sold only by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked "OIL", as instructed in Form 3057w. "TYPE D" OIL is stainless. CopyrigRl, U.S.A., 1938, 1940, I94i, 1950 and 1951 by The Singer Manufacturing Co. All Rights Reserved for all Countries
3 INDEX PA6E ACCESSORIES 13 BOBBIN WINDERS FOOT LIFTER 14 MACHINE No. I68wl MISCELLANEOUS PARTS 15 NUMERICAL LIST OF PARTS THREAD UNWINDER 4
4 INSTRUCTIONS FOR ORDERING In ordering from this list, use ONLY the PART number in the FIRST column. The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Screws, Clamping Screws, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc., which it is necessary to furnish in combination. Every combination of parts sent out has its specific number which, although not stamped on Parts (except in above case), must be used when ordering the combination. Each number always indicates the SAME PART in whatever list it appears, or for whatever Machine. The letters after some of the numbers indicate the style of finish only, as follows: A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. Soft, not polished. F. Hardened and Polished. H. Blued. J. Nickel Plated only. R, Merlized.. \ X. Black Oxide, for Iron and Steel. XC. Hardened and Black Oxide, for Iron or Steel. Y. Black Nickel Plated only. These letters MUST BE USED when they appear in the list and AFTER the number, as in the list. In this series I to 1500, to and 35000[ to are Screw Numbers to 1800, to and to are Nut Numbers to 2000, to and to are Roller Numbers to and to are Numbers of Machine Parts. The figures in the second column refer only to the plate in which the illustration of the part is shown and are NOT TO BE USED in ordering. Two or more numbers over a cut indicate that the difference between such parts is not visible in an illustration. Parts marked with an asterisk (*) are furnished only when repairs are made at the factory.
5 LIST OF PARTS COMPLETE FOR /AACHINE No. I68wl01 HIGM SPEED. SINGLE NEEDLE. COMPOUND FEED. ALTERNATING PRESSERS. LOCK STITCN. POST MACHINE. VERTICAL HOOK. FOR STITCHIhfO MEDIUM WEIOHT FABRICS AND LEATHER WHERE CROSS SEAMS ARE ENCOUNTERED. No. Plate Name * Arm with Base " " Position Pin (2) C " " Screw (3) " " " Washer (3) " Cap H " " Screw " " " Washer " Position Pin (2) E " Screw (3) Washer (3) " Shaft with and E " " Bushing (back) with
6 PARTS FOR MACHINE No. I66wl0l No Plate C H C C C F B E H C c * OE D * D C C C C , Name Arm Shaft Bushing (back) Oil Packing (wick) " Set Screw (front) with " Oil Packing (wick) " " " Thumb Screw Arm Shaft Bushing (front) Set Screw " " Connection Belt " " " " Pulley with C,200602C and two Arm Shaft Connection Belt Pulley Position Screw Arm Shaft Connection Belt Pulley Set Screw " " " " ".Spring Flange Arm Shaft Connection Belt Timing Collar with F Arm Shaft Connection Belt Timing Collar Set Screw Arm Shaft Connection Belt Timing Plate " " " " " " Screw (2) Arm Shaft Oil Packing (wick) " " " " Stop Screw Balance Wheel (disc) "V" belt groove (outside diam. of belt groove in.) with C and C Balance Wheel Adjusting Screw " " Position Screw " " Set Screw Bed with " Hinge Connection (2) " " " Screw (4) " Oil Cup " " Guard with " " " Felt " " " Screw (2) Bobbin " Case Base with , to and Bobbin Case Base Latch " " ' Pin " " " " Plunger " " " " Spring ' " Cap with C C ,241674, and two C Bobbin Case Lever " " " Driving Block " " " " Screw " " " Hinge Screw " " Oiling Felt " " " " Retainer " " " " " Screw " ' Tension Spring " " " " Regulating Screw " " " " Screw
7 PARTS FOR A^ACHINE No. I66wI0I No. Plate H C E C E D D H C E C E E F C E D ' C C C D Name Bobbin Case Washer (cloth) Bobbin Case complete,nos zmd Face Plate with H and XC _ " " Position Pin " " Thumb Screw Feed Bar " " with C, and Peed Bar Hinge Screw (driving) If M II 11 Nut " Dog, 40 needle hole, for needle sizes 20 and 22,for Feed Dog Lever " " " Adjusting Screw " " " " " Check Nut " " " Hinge Screw II II II II II Nut " " " Post " " " with F, E, E, , , , , four each E and H Feed Dog Lever Post Cover (side) with C and E Feed Dog Lever Post Cover (side) Screw II II II II Screw (2) II II II II II Washer (2) II II II II Support II. II II II II Screw " (2) II II II II II 11 Washer (2) Feed Dog Lever Slide Block Hinge Screw Nut " " Screw " Driving Connection with D and Feed Driving Connection Hinge Screw II II II II II Nut II II II II II Oil Packing (wick) Feed Driving Connection Oil Packing (wick) I " " Pinch Screw I " Eccentric II II 11 Body II II II II Position Screw II II II II Regulating Screw Feed Driving Eccentric Body Set Screw II 11 Set Screw II II II II ' Washer Feed Driving Eccentric complete, Nos. 217D, 443C, 1103C, 7071,237195, and C Feed Driving Rock Shaft II II with 2Q1518E, and C
8 PARTS FOR MACHINE No. I68wl0l No. Plate E C C D C D H « C C C C C C F F H D C Name Feed Driving Rock Shaft Crank with E " " " " " Pinch Screw " " " " Stop Collar with two C (2) Feed Driving Rock Shaft Stop Collar Set Screw Feed Lifting Cam with C " " " Fork with D and Feed Lifting Cam Fork Screw " " " " " Washer " *' " Oiling Felt II n 11 II II Screw " " " Set Screw Foot Lifter Lifting Lever " " " " Extension II II II II II Screw (2) II.1 II II II Spring " " " " Hinge Screw Hook (sewing) with and two F Hook and Bobbin Case complete, Nos and Hook Driving Gear (spiral) with C and C Hook Driving Gear Position Screw " " " Set Screw " " Shaft " " " Bushing (back) with II II II II II Qii Packing (wick) Hook Driving Shaft Bushing (back) Set Screw " " " " (center) II II II II II Set Screw " " " " (front) II II II II II Set Screw " " " Connection Belt Pulley with and two C Hook Driving Shaft Connection Belt Pulley Set Scr'ew Hook Driving Shaft Connection Belt Pulley Spring Flange Hook Gib " " Screw " Post " with H C , ,249072, ,264414, two each D and D Hook Post Clamping Screw " " Cover Plate (back) ". " " " (front) II II II II Screw " " Oil Packing (wick) II II II II II Screw ' " Screw (2) " " " Washer (2)
9 y PARTS FOR MACHINE No. I68wl0l No. Plate Name Hook post Slide Hook Post complete.,nos , , and eight H Hook Socket " " Gear with two C C " " " Set Screw H " " Screw " Washer Lifting Bell Crank C " " " Cap Screw " ' Link C " " " " Screw Stud E II II 11 Nut ^ " Eccentric " " Body C " " " Position Scrfew 1103C " " " Regulating Screw 443C " " " Set Screw " " Connection f8 " " " Crank with E and Lifting Eccentric Connection Crank Oil Packing (wick) E Lifting Eccentric Connection Crank Pinch Screw 217D Lifting Eccentric Set Screw " " " " Washer Lifting Eccentric complete,nos. 217D, 443C, 1103C. 7071, , and C Lifting Presser Foot, for F II 11 <1 Screw " Rock Shaft with E and C " " " Bushing (2) Needle Bar with F D and " " Connecting Link " " " " Oil Guard D II " " " ' Screw " " " " Stud with " " " " " Oil Packing (wick) C Needle Bar Connecting Link Stud Set Screw C M " < M II II Screw " '' " Stud with c and Needle Bar Connecting Stud Oil Packing (wick) C " " i. M Pinch Screw " " Crank with C, C, C,200428C and Needle Bar Crank with , , and Needle Bar Crank Friction Washer C " " " Position Screw C " " " Set Screw " " Rock f rame " ' " " Hinge Stud with
10 10 PARTS FOR A^ACHINE No. I68wl0l No C F C E E C C D F C C F E Plate Q086F C C F F Name Needle Bar Rock Frame Hinge Stud Oil Packing (wick) Needle Bar Rock Frame Hinge Stud Set Screw " " " " Position Bracket It It It It It It Screw Needle Bar Rock Frame Rock Shaft It It It It It It with C and Needle Bar Rock Frame Rock Shaft Crank with E Needle Bar Rock Frame Rock Shaft Crank Connection with Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Nut Needle Bar Rock Frame Rock Shaft Crank Connection Oil Packing (wick) Needle Bar Rock Frsime Rock Shaft-Crank Pinch Screw Needle Bar Rock Frame Slide Block > «" < " " with C Needle Bar Rock Frame Slide Block Screw Stud Needle Bar Rock Frame Slide Block Screw Stud Set Screw Needle Bar Thread Guide It It It It Screw " Set Screw Presser Bar with F " " Bushing (lower) " " (upper) " " " Set Screw (2) " " Lifter " " " Hinge Screw " " Lifting Bracket with E " " " " Guide Screw " " " " Pinch Screw " " Position Guide " " " " Lever with F Presser Bar Position Guide Lever Pinch Screw Presser Bar Position Guide Set Screw " Spring (flat) (heavy) " " Bracket with C " " " Pinch Screw " " Regulating Screw " " Support Screw Take-up Lever Driving Stud with " " Oil Packing (wick) Hinge Stud with " " Oil Packing (wick)
11 PARTS FOR A^ACHINE No. I68wl0l 11. No. Plate Name C Take-up Lever Hinge Stud Set Screw Tension Bracket with B and F " " Screw Tension Bracket complete,nos H, F,204271,223438,223703, , , , , two each E, Tension Disc H and " " Position Pin " Release Lever Rod E II. II II gj, " " Plunger " " Slide " " " Spring " " Washer " Spring B " Stud H " Thumb Nut Thread Controller Disc H II II II. S{. rey, " " Spring " " Stop E II II II ti Screw F " " Stud with C " " " Set Screw H " " " Thumb Nut " " " Washer " Guide " Guide " " (upper) H " " Screw (3) " Lubricator Oil Pad (felt) " " " " Holder " " " " Retainer " " " Reservoir II II II XC " " Screw II 11 II Nut H " " " Washer Thread Lubricator complete, Nos , ,240439,241755, and Thread Retainer H " " Set Screw Throat Plate " " Edge Guide H II 11 II II Screw Throat Plate complete, Nos , and two H,for AL Throat Plate Screw (2) Vibrating Presser Bar " " " Connecting Link " " " Extension with and Vibrating Presser Bar Extension Collar Pin
12 12 PARTS FOR A\ACHINE No. I68wl0l No. Plate Name Vibrating Preaser Bar Oil Packing (wick) " " " Spring C " " " Thumb Screw (pressure regulating) Vibrating Presser Foot, 40 needle hole, with F,for F Vibrating Presser Foot Pinch Screw SINGER Needles should be used in SINGER Machines These Needles and their Containers are marked with the Company's Trade Mark "SIMANCO.** Needles in Containers marked "FOR SINGER MACHINES" are NOT SINGER made needles. 2
13 13 ACCESSORIES No. Plate Name Bobbin (5) Screw Driver (Bobbin Case) 135x17 Needles,six, size Drip Pan, 20 in. long, with four 3/4 in. wire nails Machine Rest Pin (wood) Oiler (copper plated) with *' Spout (3-1/2 in. long) Screw Driver (5 in. blade) (machine, large) " " (7-1/4 in. long) Wrench (steel) BOBBIN WINDER (SWINGING AUTOAAATIC, RIGHT HAND) FOR "V" BELT DRIVE F C E H D H H Brake (leather) " Clamp " " Screw Frama with and " Hinge Pin " Oil Packing (wick) " " Well Washer " Spring " " Plunger Pulley with C " Set Screw Spindle Stop Latch " " Screw " " Thumb Lever " " " ' Hinge Stud " " " " Joint Stud " " Trip Lever ' " " " Hinge Screw Tension Bracket with H " " Screw " " " Washer " Disc " Spring " Stud " " Thumb Nut Bobbin Winder Tension Bracket complete, Nos , H, and two 2102
14 14 ACCESSORIES No. Plate Name Bobbin Winder and Tension Bracket Base Universal Bobbin Winder complete,nos E D F H, , , to ,225458,225462,228026, , , , , two each and wood s c r ews 3/4 in., No. 12, R. H. B. FOOT LIFTER Foot Lifter Lever with " " " Chain, 48 in. long, with Foot Lifter Lever Chain Hook (lower) " " " " " (upper) " " " Hinge Pin " " " Stand with two wood screws 1 in., No Foot Lifter Lever complete, Nos , , and (Other Foot Lifter parts are listed with parts of Machine Head) THREAD UNWINDER FOR TWO SPOOLS Spool Pin H tl M " Nut " Washer M Rest (for two spools) (flat) with C two each H, and Spool Rest Cushion (felt) II C II " Rod " " Set Screw C II " Set Screw II Stand with C Thread Guide H II " Lock Nut " Position Cup " " Rod with 208AL and AL " V " Screw " " Washer Thread Unwinder (for two spools) complete. Nos H, 225'257, , , ,259658,two each , and three wood screws 7/8 in.,no. 12
15 15 BOBBIN WINDER (SWIN61N6 AUTOAAATIC, RIGHT HAND) FOR S/,e INCH ROUND BELT DRIVE No. Plate Name Note: Same as "V" belt Bobbin Winder with the following exceptions Pulley with C Bobbin Winder and Tension Bracket Base ' Universal Bobbin Winder complete,nbs E D F H ,225368,225381, , to ,225458,225462,228026, to , two each and wood screws 3^ in.,no.l2,r.h.b. MISCELLANEOUS PARTS USED IN CONJUNCTION WITH THREAD UNWINDER Spool Weight with " " Center Pin " Wire,for small spools Thread Gone (wood) " " Holder SINGER Needles should i>e used in singer Machines These Needles and Lheir Containers are marked with the Company's Trade Mark "SlMANCOr Needles in Containers marked "FOR SINGER A\ACHINES" are NOT SINGER made needles.
16 17 NUMERICAL LIST OF PARTS No. Plate 208AL D D C C C C E E C C E C E E C D E E E 20006IC N&me Thread Unwinder Thread Guide Rod Screw, for Feed Driving Eccentric Set Screw, for Lifting Eccentric Set Screw, for Feed Driving Eccentric Body Set Screw, for Liftihg Eccentric Body Set Screw, for Feed Driving Eccentric Body Regulating Screw, for Lifting Eccentric Body Regulating Screw, for Bobbin Winder Tension Disc, for Feed Driving Eccentric Set Screw Washer, for Lifting Eccentric Set Screw Washer, for Screw Driver (5 in. blade) (machine,large) Bobbin Winder Tension Spring, for Thread Unwinder Thread Cone (wood) Machine Rest Pin (wood) Bed Oil Cup, for Thread Unwinder Spool Weight with " " " " Center Pin, for Oiler (copper plated) with " Spout (3-1/2 in. long), for Thread Unwinder Spool Rest Cushion (fe^t), for Arm Base Screw " Screw Feed Dog Lever Post Support Screw Hook Post Screw Feed Driving Rock Shaft Crank Pinch Screw, for Feed Dog Lever Post Screw Lifting Eccentric Connection Crank Pinch Screw, for Needle Bar Rock Frame Rock Shaft Crank Pinch Screw, for 26411Z Feed Lifting Cam Fork Screw, for " Driving Connection Pinch Screw, for Feed Dog Lever Post Support Screw, for Presser Bar Lifting Bracket Pinch Screw, for Bobbin Winder Stop Latch Screw, for and Thread Controller Stud Set Screw
17 18 No. Plate F D Ub082D D Gub86C F C D F F F F F E I38D F F B H D D H a0263D E H H E C C C C C C C C C C H C C C NUMERICAL LIST OF PARTS Name Lifting Presser Foot Screw, for 208S66 Bobbin Case Lever Driving Block Screw, for Bobbin Winder Tension Bracket Screw, for 25V431 and Foot Lifter Lifting Lever Extension Screw Needle Bar Connecting Stud Pinch Screw, for Presser Bar Position Guide Lever Pinch Screw, for Presser Bar Spring Bracket Pinch Screw, for Bed Oil Guard Screw Feed Dog Scf«-w,for Needle Bar Ruck Frame Position Bracket Screw Arm Shaft Connection Belt Timing Collar Set Screw, for Bobbin Winder Brake Clamp Screw, for and Needle Set Screw, for Thread Controller Spring Stop Screw Hook Post Oil Packing (wick) Screw, for Hook Post Clamping Screw Tension Bracket Screw Arm Shaft Connection Belt Timing Plate Screw Throat Plate Edge Guide Screw, for Feed Lifting Cam Oiling Felt Screw, for Needle Bar Thread Guide Screw, for Foot Lifter Lifting Lever Hinge Screw Feed Dog Lever Hinge Screw " " " Slide Block Hinge Screw, for Arm Cap Screw Bobbin Winder Stop Latch Trip Lever Hinge Screw, for and Tension Release Lever Screw, for Arm Shaft Connection Belt Pulley Screw, for Hook Driving Shaft Bushing (back) Set Screw " " " (front) Set Screw " " " " (center) Set Screw Needle Bar Crank Set Screw, for Arm Shaft Bushing (back) Set Screw " " " (front) Set Screw Needle Bar Rock Frame Hinge Stud Set Screw Presser Bar Bushing Set Screw " " Position Guide Set Screw Thread Retainer Set Screw Feed Dog Lever Adjusting Screw, for Hook Driving Gear Set Screw,for Needle Bar Connecting Link Stud Set Screw, for
18 NUMERICAL LIST OF PARTS 19 No. Plate C C C C C C C C H H H OE AL H H H C C C C F F H C c F C C C D mF C C B F C C C F H E Name Bobbin Winder Pulley Set Screw, for and Hook Socket Gear Set Screw, for , Feed Drivii^ Rock Shaft Stop Collar Set Screw, for Needle Bar Connecting Link Stud Set Screw, for Take-up Lever Hinge Stud Set Screw Thread Unwinder Spool Rest Rod Set Screw, for Needle Bar Rock Frame Slide Block Screw Stud Set Screw, for Needle Bar Crank Position Screw, for Face Plate Thumb Screw Arm Shaft Bushing (front) Oil Packing Thtimb Screw Hook Socket Screw, for Bed Hinge Connection Screw Throat Plate Screw Feed Dog Lever Post Cover (side) Screw, for Thread Guide Screw Hook Post Cover Plate Screw, for Bobbin Case Tension Spring Screw, for Arm Shaft Connection Belt Pulley Position Screw, for Presser Bar Lifter Hinge Screw Needle. Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Presser Bar Spring Support Screw " " Lifting Bracket Guide Screw Thread Controller Disc Screw, for Bobbin Case Tension Spring Regulating Screw, for Lifting Bell Crank Cap Screw Vibrating Presser Foot Pinch Screw, for Thread Unwinder Spool Rest Set Screw, for Needle Bar Rock Frame Slide Block Screw Stud,for Feed Driving Connection Hinge Screw Needle Bar Connecting Link Oil Guard Screw Thread Controller Stud with , for Feed Lifting Cam Set Screw, for Hook Driving Gear Position Screw, for Tension Stud, lor Hook Gib Screw, for " Driving Shaft Connection Belt Pulley Set Screw, for Bobbin Case Lever Hinge Screw, for Balance Wheel Set Screw, for Presser Bar Spring Regulating Screw Bobbin Winder Tension Stud, for Feed Driving Connection Hinge Screw Nut
19 20 NUMERICAL LIST OF PARTS No. Plate Name E Feed Bar Hinge Screw Nut, for E Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Nut E Feed Dog Lever Adjusting Screw Check Nut, for E Lifting Bell Crank Link Screw Stud Nut, for E Feed Dog Lever Slide Block Hinge Screw Nut, for D Feed Dog Lever Hinge Screw Nut H Thread Unwinder Spool Pin Nut, for H Bobbin Winder Tension Stud Thumb Nut, for H Tension Thumb Nut, for H ' Thread Controller Stud Thumb Nut, for H " Lubricator Screw Nut, for H " Unwinder Thread Guide Lock Nut, for Arm Base Screw Washer " Screw Washer * Bobbin Case Base Latch Pin, for Face Plate Position Pin, for Arm Shaft Bushing (back) Oil Packing (wick), for Arm Shaft Bushing (front) Oil Packing (wick). for Hook Driving Shaft Bushing (back) Oil Packing (wick), for Arm Cap Screw Washer " Shaft Connection Belt Pulley Spring Flange,for Hook Driving Shaft Connection Belt Pulley Spring Flange,for Needle Bar Connecting Link Stiid Oil Packing (wick), for Bed Hinge Connection Bobbin Winder Frame Oil Packing (wick), for Feed Driving Connection Hinge Screw Oil Packing (wick) Feed Driving Connection Oil Packing (wick). for Needle Bar Rock Frame Hinge Stud Oil Packing (wick),for Needle Bar Rock Frame Rock Shaft Crank Connection Oil Packing (wick), for Take-up Lever Driving Stud-Oil Packing (wick), for Vibrating Presser Bar Oil Packing (wick) Needle Bar Connecting Stud Oil Packing (wick), for Needle Bar Connecting Link Stud with , for Presser Bar Position Guide " " " " Lever with
20 NUMERICAL LIST OF PARTS 21 No. Plate Name 202J Take-up Lever Driving Stud with , for Take-up Lever Hinge Stud with , or Thread.Guide Take-up Lever Hinge Stud Oil Packing (wick), lor B»>bbin Winder Stop Latch Trip Lever, for and Presser Bar Lifter Feed Driving Rock Shaft Stop Collar with two Needle Bar Rock Frame Position Bracket " " '' " Slide Block, for Needle Bar Crank with 2O0335C, C, C C and , or Fooi Lifter Lever Chain Hook (upper),'for Needle Bar Crank Friction Washer Nos to 2G3213,for Bobbin Case Base Latch ' " " Plunger " Spring " Tension Spring, for " " Washer (cloth), for Hook Gib, for Feed Dog Lever Slide Block, for " " " Post Screw Washer " " " " Support Screw Washer Hook Post Screw Washer 20* Arm Base Position Pin " Position Pin Vibrating Presser Bar Fxtension Collar Pin, for T«nsioi. Release Washer, for Thread Controller Stud Washer, for F Fresser Bar Bushing (upper) Arm Shaft Bushing (front) with Needle Bar Cnnnecting Stud with C and , for Presser Bar Lifting'Bracket with E " " with F Needle Bar Rock Frame Hinge Stud with (' Needle Bar Rock Frame Slide Block with C. for Thread Guide (upper) " Lubricator Screw Washer,for Hook Post Cover Plate (back), for Feed Dog Lever Post Support, for Tension Spring, for Feed Driving Rock Shaft, for " " " " Crank with E " Lifting Cam Oiling Felt, for Needle Bar Rock Frame Rock Shaft, for
21 22 NUMERICAL LIST OF PARTS No. Plate Name Needle Bar Rock Frame Rock Shaft with C and Tension Release Lever,for " " Plunger,for Thread Controller Disc,for Foot Lifter Lifting Lever Extension Bed Oil Guard Felt,for Hook Driving Gear (spiral) with C and Arm Cap Hook Socket Gear with two C. for Thread Guide Feed Lifting Cam Fork with D and , for Arm Shaft Connection Belt Pulley with C, C and two Hook Driving Shaft " " " Bushing (back) with Hook Driving Shaft Connection Belt Pulley with and two C Arm Shaft Connection Belt Timing Collar with F Drip Pan, 20 in. long, with four 3/4 in wire nails Feed Lifting Cam with C Bobbin Case Base with , to and ,for Arm Shaft Oil Packing (wick), for Foot Lifter Lever Hinge Pin, for Thread Unwinder Spool Rest (for two spools) (flat) with C,two each H, and ,for Thread Unwinder (for two spools) complete, Nos H, , , , , , two each , dnd three wood screws 7/8 in.,no Thread Unwinder Thread Guide Rod Washer, for Thread Unwinder Thread Guide Rod with 208AL and , for Thread Unwinder Thread Guide Position Cup,for Bobbin Winder Pulley with C, for , used in place of Thread Unwinder Spool Wire,for small spools Bobbin Winder Spindle, for smd Thread Unwinder Spool Rest Rod, for " " Thread Cone Holder ' " " Guide, for Bobbin Winder Stop Latch, for and
22 NUMERICAL WST OF PARTS 23 No. Plate Name Nob to , for and Bobbin Winder Frame with and " " " Hinge Pin " " " Spring " ' ' Plunger " " Stop Latch Thumb L,ever, for and Bobbin Winder Stop Latch Thun.t) 1 t ver Hinge Stud.for and Bobbin Winder Stop Latch Thumb Lever Joint Stud,for and Bobbin Winder Tension Bracket willv H,for Bobbin Winder Tension Bracket complete, Nos,13710,201572H, ano two 2102, for and Screw Driver (7-1/4 in. long) Wrench (steel) Feed Lifting Cam Fork Sc rew Washe t, tor I 7261 Foot Lifter Lifting Lever Lxtension Spring " " Lever Chain, 48 in. long, with for Fool Lifter Lever Stand with two wood screws 1 in., No. 12, for Foot Lifter Lever with ,for " " " Cham Hook (lower), for Foot Lifter Lever complete, Nos , and Bobbin Winder Tension Bracket Screw Washer, for and Screw Driver (Bobbin Case) Thread Unwinder Spool Pin, lor " " " " Washer, for Bobbin " Case Lever Driving Block. lor " " Lever,for Hook (sewing),for " Washer.for " with and two F, for Tension Release Lever Rod Presser Bar Bushing (lower) Tension Disc Position Pin, for Bobbin Case Cap with C C, ,241674, and two C, for Bobbin Case complete, Nos and , for Thread Controller Spring, for * Feed Driving Eccentric, for * Lifting Eccentric, for Feed Driving Eccentric complete, No.s. 217D, 443C,I103C,7071,237195, and C
23 24 NUMERICAL LIST OF PARTS No. Plate Name Lifting Eccentric complete, Nos. 217D, 443C, 1103C.7071,237195, and C * Feed Driving Eccentric Body,for * Lifting Eccentric Body,for Thread Lubricator Oil Pad Holder, for Thread Lubricator complete, Nos , ,241755, and Needle Bar Connecting Link, for Tension Bracket with B and , (or Thread Retainer Lifting Bell Crank Link " Eccentric Connection " Rock Shaft with E and C Needle Bar Rock Frame Tension Release Slide " " " Spring Lifting Eccentric Connection Crank with E and Presser Bar Spring (flat) (heavy) Lifting Rock Shaft Bushing Foot Lifter Lifting Lever Needle Bar Crank with , , , and Face Plate with H and XC Vibrating Presser Bar " " " Connecting Link " " " Extension with and Vibrating Presser Bar Extension Collar, for Vibrating Presser Bar Spring Lifting Bell Crank Needle Bar with F, D and Thread Lubricator Oil Pad Retainer, for Tension Bracket complete, Nos H, F,204271,223438,223703,223704, ,237174, , two each E, H and Needle Bar Thread Guide, for ^ Lifting Presser Foot, for Vibrating Presser Foot,40 needle hole, with F,for Arm Shaft Bushing (back) with Thread Controller Spring Stop Hook Post Cover Plate (front), for Take-up Lever, for Bobbin Case Oiling Felt, for " " " " Retainer, for Thread Lubricator Oil Pad (felt),for " " " Reservoir, for " " Wick, for Tension Disc, for Lifting Eccentric Connection Crsuik Oil Packing (wick), for
24 NUMERICAL LIST OF PARTS 25 No Plate Nos * Name Hook Post Oil Packing (wick), for to ,for Bobbin Winder Brake (leather),also for Bobbin Winder Brake Clamp, also for " " and Tension Bracket Base, used in place of Universal Bobbin Winder complete, Nos E, D, F, H, ,225368, , , to , ,225462, to , two each and wood screws 3/4 in., No. I2,R.H.B..used in place of Bobbin Winder Pulley with C,for Universal Bobbin Winder complete, (for "V" belt drives) Nos E D, r,200299H, ,225381, , to , ,225462,228026, ,^59429,259461,259662, two each and wood screws 3/4 in.. No, 12, R. H. B. Thread Unwinder Spool Stand with C, for Bobbin Winder Frame Oil Well Washer, for Bobbin Winder and Tension Bracket Base, for Arm Base " Shaft Connection Belt Bed with Feed Driving Connection with 2Q0049D and Feed Dog Lever, for Hook Driving Shaft Bushing (center) " " " " (front) " Socket, for ) Needle Baj Rock Frame Rock Shaft Crank Connection with Needle Bar Rock Frame Rock Shaft Crank with E Bed Oil Guard with Arm with " Shaft with and E " " Connection Belt Timing Plate Feed Bar,for " " with C, and 2258ii7, for Feed Dog, 40 needle hole, for needle sizes 20 and 22,for Feed Dog Lever Post, for " with F, E, E, , 22J,212, , ,four each E and H Feed Dog Lever Post Cover (side) with C and E. for
25 26 NUMERICAL LIST OF PARTS No. Plate Name Hook and Bobbin Case complete, Nos and for Hook Post, for " " with H C , two each D and D. for Hook Post Slide, for Hook Post complete. Nos , , and eight H Presser Bar Spring Bracket with C Throat Plate,for " " Edge Guide, for Throat Plate complete,nos , 2644i$l and two , for Balance Wheel (disc) "V" belt groove (outside diam. of belt groove in.) with C and C Feed Driving Rock Shaft with E, and C Needle Bar Connecting Link Oil Guard C Balance Wheel Position Screw, for C Feed Driving Eccentric Body Position Screw, for C Lifting Eccentric'Body Position Screw, for C Lifting Bell Crank Link Screw Stud, for C Vibrating Presser Bar Thumb Screw (pressure regulating) C Feed Bar Hinge Screw (driving), for C Bobbin Case Oiling Felt Retainer Screw, for H Balance Wheel Adjusting Screw E Arm Shaft Oil Packing Stop Screw, for XC Thread Lubricator Screw, for
26 Jtf % U26 I 202U7O 225UU4 2OCO56E H I 2255faC C U5I4 225U'> ^55 / ^ CK>:i82n 225U61 201«99H V K H IL #3"
27 / H U 208flL \ \, \ / / / / H Q1018C ic C H iz^in / / A ] 6091«
28 flL /200172H / I H AL
29 200473H H F I L XC H r 2378U6 A F
30 I7260-'/ C C C 2«0205 2« F F i E C C ; ^ C C 00074F
31 C 2i.l5l f): b *34, Z0Z t kv 2OII83D xi'-oro-f
32 = C z350137c \ ' «8821 2^0l7^^ C C 524E E 22309! E ?nii4ic Bi ^T ' yfe' / C
33 264A24 26^^05 < 22U C ^ D 2ai518E C Is C E
34 '?-?327C.y 2cr3357 SOOlbUB v 20C527G! C ^ n3F S 5 o \ I
35 '/; E C F H E: ' H / 2OOO24C 2OOO54E 2OOO54E C
36 H^ V Q1272C D' H D 4S0a» H ro c\ 200^2C C F
37 U05C ^ i'"' C C C
38 E 22:aDJ» buoo' ijE 20004dD r\22'' ^22:-; 200C35
39 200502H \ n/ H C C 217D E I C^ If C 1103c \ ^ c\\ /' C H
40 / " \i r^-3«r5»eci ril j - j j w \ Jit
41 J % Vi - PP99I
42 22U0U0 2005ti2H /, 210Q H H f 0_O ^ F X ^ J03 223U38 J4404d A 22370U ;200309E B 23717U 20U ? 20O970H 2UI c 1 20U
43 V U3
44
LIST PARTS. MAC~INE No. 410wl0 ** A TRACE MARK OF THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Form 3021w --- - -- -- (250) Printed in U. S. A. LIST OF PARTS MAC~INE No. 410wl0 ** A TRACE MARK OF THE SINGER MANUFACTURING COMPANY INSTRUCTIONS FOR OILING To ensure easy running and prevent unnecessary
More informationSINGER 531B-8BL. From the library of: Superior Sewing Machine & Supply LLC
SINGER 53B-8BL PERSPECTIVE THREAD TENSION, GUIDE, NEEDLE PLATE i SINGER 4 THREAD TENSION, GUIDE, NEEDLE PLATE 3 Fig. No. Parts No. Quantity Name of Parts Fig. No. Parts No. Quantity Name of Parts 0698
More information1 ~::~, ~~/"' v -\ K 1' SINGER* G.,~ I ~ ~" ""cj. [E>~i 1241~ D200A ~\ c:? ""' B ~ ~
SNGER* 431 D200A 544249 410672 505317-452 52454 ""cj 504094 ""', 410572-004 1 ::, 545901 549128...--- "''i:i K 1' 1241 549336 / 540549 /544980 t c:? 505151 505152 [E>i 504159-452 B--504083 ""' 0.;. ""'"
More informationMACHINE PARTS CHART SINGER*
Form U3174 (Rev. 983) Part No. 643197 002 (Rev. 1) MACHINE PARTS CHART for SINGER* 220 220 U2 U3 * A Trademark of THE SINGER COMPANY Copyright 1980 THE SINGER COMPANY All Rights Reserved Throughout the
More informationPARTS LIST. SCHflSSs. Nos. 133w102 and 133w 103 A/^CHINES THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Forir 2787w (841 ) Printed, in U. Sr-A. LIST OF PARTS SCHflSSs A/^CHINES Nos. 133w102 and 133w 103 THE SINGER MANUFACTURING COMPANY Copyright, U. S. A., 1938, 1939, 1940 and 1941 by Tho Singer Manufacturing
More informationMachine No. 62=53 LIST OF PARTS COMPLETE. Cp'2.- THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Cp'2.- e NUMIJEKINO DEPAilTMENT AuilEST 7, 1014 LIST OF PARTS COMPLETE A Machine No. 62=53 %= THE SINGER MANUFACTURING COMPANY iiv ^ --. : ' '', - - - -- W. ;.y -::- -^=v c v; > >,- -- ^/;c. V ^. r,.'
More informationSinger From the library of: Superior Sewing Machine & Supply LLC
Singer 69-14 LST OF PARTS COMPLETE NO. 69=14 MACHNE The Singer Manufacturing Co. ) LST OF PARTS COMPLETE FOR No. 69=14 Machine Central Bobbin, makes 18 staying and three fastening or tying stitches in
More informationfor SINGER Copyright :s: SINGER SEWING MACHINE COMPANY All Rights Reserved Throughout The World
Form U6290 17931 Part No. 379453-002 Printed 1n Japan MACHINE PARTS CHART for SINGER 300U101A Copyright :s:- 1993 SINGER SEWING MACHINE COMPANY All Rights Reserved Throughout The World :"/UMERICAL LIST
More informationPARTS LIST MODEL: HDEJ1800
First Edition: June 0 PARTS LIST 0 8 4 8 8 4 8 0 KEY PARTS NO. NO. DESCRIPTION 0400 Top cover (unit) 00 Top cover (unit) 0000 Top cover 4 40A04 Flip-top sewing instruction panel 000 Hinge rod (right) 00
More informationTZl Please clarify Ref. No. and Parts No. as well as parts name When you place an order.
II -. TZl-.865.2 /...._J..... "Ill -.. Please clarify Ref. No. and Parts No. as well as parts name When you place an order.... ~.. Ref. No. N arne of Parts Part No. Ref. No. N arne of Parts Part No. 1
More informationLIST PARTS. A\ACHINE No THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC
Form 19808 ( 1141 ) Printed in U. S. A. LIST OF PARTS A\ACHINE No. 231-25 THE SINGER MANUFACTURING COMPANY INSTRUCTIONS FOR OILING Lift out the arm reservoir gauge and fill the oil reservoir to the level
More informationCONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT, NEEDLE BAR AND FEED MECHANISM... 4 (3) SHUTTLE HOOK, BH AND FEED ADJUST MECHANISM...
11.1999. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT, NEEDLE BAR AND FEED MECHANISM... 4 (3) SHUTTLE HOOK, BH AND FEED ADJUST MECHANISM... 8 (4) PATTERN SELECTION MECHANISM... 10 (5) LAMP, THREAD
More informationMITSUBISHI SEWING MACHINE PARTS CATALOG
From the library of: Superior Sewing Machine & Supply LLC V \ V. 3 ) MITSUBISHI SEWING MACHINE PARTS CATALOG Model DH-400 INDEX 1. 2^ b!5 pp Arm bed & its accessories V40-1 2. ±.$4, Upper shaft & needle
More informationFrom the library of: Superior Sewing Machine & Supply LLC
1. Base plate, Handle, and Oil 'Wick.,... ' J 205-201-01 A 205-1-01C WS-01-~ 51-0002 --.205-14-01 --- WP-0501 Lsi-50001 2. Covers -05-0-01 A 205-0-00 205-0-00B From the library of: Superior Sewing 2 Machine
More informationPARTS REFERENCE LIST MODEL: M929D
Home Sewing Machine PARTS REFERENCE LIST MODEL: M929D CONTENTS (1) PRINCIPAL PARTS... 2 (2) NEEDLE BAR, FEED BAR AND PRESSER HOLDER... 4 (3) KNIFE AND LOOPER... 6 (4) LAMP, MOTOR AND ACCESSORY... 8-1 -
More informationOPERATING INSTRUCTIONS 3421UX VETERANS BLVD, CARLSTADT, NJ 07072
OPERATING INSTRUCTIONS 3421UX5-1 400 VETERANS BLVD, CARLSTADT, NJ 07072 CONTENTS DESCRIPTION... 3 OPERATOR INFORMATION... 5-8 INSTALLATION...... 4 ADJUSTMENT... 8-17 LUBRICATION... 5 INDEX Description
More information488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
More informationCONSOLIDATED SEWING MACHINE CORP. I.. INDUSTRIAL SEWING & CUTTING EQUIPMENT. Model 106R INSTRUCTION MANUAL & PARTS BOOK
CONSOLDATED SEWNG MACHNE CORP... NDUSTRAL SEWNG & CUTTNG EQUPMENT Model 06R NSTRUCTON MANUAL & PARTS BOOK Table of Contents. ntroduction.... 2. Main specifications.... 3. nstallation and preparation....
More informationDT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher
DT3-B291 Cylinder Bed Needle Feed Double Chain Stitcher Specifications DT3 - B291-060 - No. of needles & Needle gauge 7 Twin needle, 31.8 mm (1 1/4) 8 Twin needle, 34.9 mm (1 3/8) A 4 needle, 6.4-25.4-6.4
More information16U288 SINGER' SEWING MACHINE. From the library of: Superior I Sewing Machine & Supply LLC INSTRUCTIONS. Form UIO3 (Rev, 377)., THE SINGER COMPANY
iiv^- Form UIO3 (Rev, 377)., INSTRUCTIONS FOR USING AND ADJUSTING SINGER' SEWING MACHINE 16U288 THE SINGER COMPANY From the library of: Superior I Sewing Machine & Supply LLC CONTENTS PAGE DESCRIPTION
More informationSERVICE MANUAL AND PARTSLIST
SERVICE MANUAL AND PARTSLIST Next 20 CONTENTS WHAT TO DO WHEN... 1~3 SERVICE ACCESS FACE COVER... 4 TOP COVER... 4 BASE COVER... 5 REAR COVER... 6 FRONT COVER... 7 MECHANICAL ADJUSTMENT NEEDLE THREAD TENSION...
More informationSINGER. PARTS LIST DEARBORN BLIND STITCH MACHINE MODEL 12 SS-1 SINGER COMPANY OF CANADA LIMITED
SINGER. PARTS LIST DEARBORN BLIND STITCH MACHINE MODEL 12 SS1 SECTIONS MAIN SHAFT NEEDLE SHAFT FEED FRAME SWING PLATE SKIP CONTROL MACHINE GEAR ASSEMBLY LOOPER ROD REGULATING KNEE LIFT AND CRANK HEAD NEEDLE
More informationLS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
More informationNEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.
NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0
More informationLONSEW. model. en 2230 R LIST OPERATING ~IONS' P~RTS CONSOLIDATED SEWING MACHINE CORP. COP RIGHT 1989 CONSOLIDATED SEWING MACHINE CORPORATION
/ OPERATING ~IONS' P~RTS LIST LONSEW CONSOLIDATED SEWING MACHINE CORP. model en 2230 R CONSOLIDATED SEWING MACHINE CORP. COP RIGHT 1989 CONSOLIDATED SEWING MACHINE CORPORATION SPECIFICATIONS -CON SEW Model
More informationCONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION
CONTENTS PRECAUTIONS BEFORE STARTING OPERATION ------------------------------------- 1 PREPARATION FOR OPERATION 1. Adjustment of needle bar stop position ---------------------------------------------------------
More informationPARTS LIST MODEL DC4100
MODEL DC0 0 0 MODEL DC 0 KEY 0 0 PARTS 00 000 00000 000 00 0000 00000 000 00 0000 000 00 000 00000 000 000 000 000 000 0 00000 0 0000 0 0000 000 0000 00 00000 0000 0 0000 00000 00 00 00000 00000 0000 DESCRIPTION
More informationSERVICE MANUAL PARTS LIST MODEL: NH40
SERVICE MANUAL & PARTS LIST MODEL: NH40 CONTENTS What to do when... 1-3 SERVICE ACCESS Face Cover... 4 Bed Cover... 5 Free-arm Cover... 6 Front Cover... 7 Rear Cover... 8 MECHANICAL ADJUSTMENT Presser
More informationSERVICING MANUAL 419S/423S
SERVICING MANUAL 415 419S/423S TROUBLESHOOTING PROBLEM CAUSE REMEDY REFERENCE 1. SKIPPING 1. NEEDLE IS NOT INSERTED INSERT THE NEEDLE PROPERLY. STITCHES PROPERLY. 2. NEEDLE IS BENT OR WORN. CHANGE THE
More informationSERVICE MANUAL. Sewing Machine. Copyright 1976 The Singer Company Aii Rights Reserved Throughout the World *A Trademark of THE SiNGER COMPANY
1 SERVICE MANUAL SINGER Sewing Machine 121D200A Copyright 1976 The Singer Company Aii Rights Reserved Throughout the World *A Trademark of THE SiNGER COMPANY Form 21624 (876) Printed In U.S.A. LUBRICATION
More informationMACHINE COMPANY. From the library of: Superior Sewing Machine & Supply LLC. 17 and T194-8 CLASSES LIST OF PARTS F OR
INDUSTRIAL FINEST QUALITY LEWIS COLUMBIA SEWING MACHINES CLASSES 17 and 24 LIST OF PARTS F OR 17-100 17-130 24-120 24-130 CATALOG NO. T194-8 CHICAGO MACHINE COMPANY Catalog Noo T194-8 LIST OF PARTS Styles
More information...r.smcefbdb. DNSEWe CONSOLIDATED SEWING MACHINE CORP. L INDUSTRIAL SEWING & CUTTING EQUIPMENT OPERATING INSTRUCTIONS. and PARTS LIST.
...r.smcefbdb DNSEWe CONSOLIDATED SEWING ACHINE CORP. L INDUSTRIAL SEWING & CUTTING EQUIPENT OPERATING INSTRUCTIONS and PARTS LIST for CONSEW ODELS 18 and 118 INDUSTRIAL SEWING ACHINES IDA TED SEWING ACHINE
More informationPage 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
More informationFrom the library of: Superior Sewing Machine & Supply LLC
SEIKO {( im (B JP M t O ^ mid jmt ^ IO JES JLi X) 2n> ^ ^ ^ ^ ^ ^ SSlSiD STSRM SlUMRSS 1? /tf SPECIFICATIONS Maximum speed: Number of needle : Needle: Thread: Feed : Stitch: Presser foot: Presser bar lift:
More information/ ' r V SERVICE MANUAL FOR SINGER SEWING MACHINES 211G G156 THE SINGER COMPANY. From the library of: Superior Sewing Machine & Supply LLC
/ ' r V SERVICE MANUAL FOR SINGER SEWING MACHINES 211G 155 211 G156 THE SINGER COMPANY CONTENTS Page Description 3 Speed 3 Installation of the machine 4 Lubrication 4 Needles 5 Thread 5 Bobbin removal
More informationS-85SCH
4411-4423-4432-4443-4452 5511-5523-5532-5554 44S-85SCH Service Manual 104 73 14-26 2014-02-24 CONTENTS 1. Names of principal parts...2 2. Removing methods of external parts 2-1 Sewing table...3 2-2 Face
More informationSECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
More informationPARTS REFERENCE LIST MODEL: BLDC2 BL200A
Home Sewing Machine PARTS REFERENCE LIST MODEL: BLDC2 BL200A CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT / NEEDLE BAR, PRESSER MECHANISM... 4 (3) FEED, ROTARY HOOK / THREAD CUTTING MECHANISM... 6
More informationPARTS CATALOGUE FOR PROFESSIONAL EMBROIDERY MACHINE PR600 PR600C
PARTS CATALOGUE FOR PROFESSIONAL EMBROIDERY MACHINE PR600 PR600C 10. 2003. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT MECHANISM... 4 (3) NEEDLE BAR MECHANISM... 6 (4) NEEDLE BAR CHANGE MECHANISM...
More informationYAO HAN 耀瀚股份有限公司 YA O H A N I N D U S T R I E S C O., LT D. 手提式縫口袋機 YA O H A N I N D U S T R I E S C O., LT D.
耀瀚股份有限公司 YA O H A N I N D U S T R I E S C O., LT D. YAO HAN MODEL ONE THREAD F300A ( 單線 ) TWO THREAD F302A ( 雙線 ) 手提式縫口袋機 PORTABLE BAG CLOSER PARTS BOOK 零件本 2005.09.26 耀瀚股份有限公司 YA O H A N I N D U S T R
More informationSINGER 591D200A 591D240A 591D303A 591D305A 591C308A. rom the library of: Superior Sewing Machine & Supply LLC 591D300A
SINGER 591D200A 591D240A 591D300A 591D303A 591D305A 591D308A 591C200A 591C240A 591C300A 591C308A CONTENTS Page Introducingtlie NewSINGER* Sewing Machine Model 591 \ Oiling the Machine 2 Oiling the Puller
More informationSection A Gear Box September A
Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More informationY A O H A N MODEL ONE THREAD
Y A O H A N MODEL ONE THREAD N00A( ) N0A( TWO THREAD ) ONE THREAD HIGH SPEED N00H( ) TWO THREAD HIGH SPEED N0H( ) P OR T A B L E B A G C L OS E R P A R T S B OOK Y AO HAN INDUS TR IE S C O., L TD. 00.0.
More informationParts list. From Product number xx MARCH SVP Worldwide - All rights reserved.
Parts list 01 SVP Worldwide - All rights reserved. From Product number 971-xx 0 MARCH 01 A 1 9 7 8 10 1 11 1 1 1 19 18 17 1 0 1 1 7 8 0 1 1 9 1 19810 PRE -TENSION UNIT 17901 REEL PIN 1701 SPRING, REEL
More informationFBX1104P FBX1104 FBX1106P FBX1106
FBX1104P FBX1104 FBX1106P FBX1106 Second edition : September 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's FBX Series. Read and study this instruction manual carefully before
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More information535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
More informationI INDUSTRIAL SEWING & CUTTING EQUIPMENT
CONSOLDAT D SEWNG MACHNE CORP. NDUSTRAL SEWNG & CUTTNG EQUPMENT CONSOLDATED SEWNG MACHNE CORP. NDUSTRAL SEWNG & CUTTNG EQUPMENT 400 VETERANS BLVD, CARLSTADT, NJ 07072 CONTENT Operation nstruction 1. Brief
More informationINSTRUCTIONS and PARTS BOOK. U. S. Blind Stitch Machines
r- INSTRUCTIONS and PARTS BOOK for U. S. Blind Stitch Machines Model 88-R. S. BLIND STITCH MACHINE CORP. 12 SEVENTH AVENUE NEW YORK 1, N. Y. LAclcawanna 4-9144-5-6 A SUPPLEMENT TO PARTS CATALOGUE FOR U.S.
More informationPARTS REFERENCE LIST MODEL: 2340CV
Home Sewing Machine PARTS REFERENCE LIST MODEL: 2340CV Published: Sep.,2003 Revised: Mar.,2014 MODEL LIST Model Countries (Added Date) 2340CV CAN, GUF (Apr / 2011) 2340CV MYS (May / 2011) 2340CV HKG (Mar
More informationSERVICE MANUAL & PARTS LIST MODEL: MC400E
First Edition: February SERVICE MANUAL & PARTS LIST MODEL: MC00E PARTS LIST MODEL: MC00E 0 0 MODEL: MC00E KEY PARTS NO. NO. DESCRIPTION 0 0 0B0 000 0A0 0A0 000 000 0 000 0 0000 0000 000 00 0 0 00 A0 0B0
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationLEWIS. PARTS and INSTRUCTIONS. 150 Class Machines. ll/j"zu.m.jl;.ic.c:':i.q.:. MACHINE COMPANY. Catalogue Models
LEWIS PARTS and INSTRUCTIONS Catalogue 194-5 150 Class Machines Models 150-1 150-5 150-6 150-6TS 150-7 150-9 150-15 150-16 150-17 150-20 150-23 PRODUCT OF ll/j"zu.m.jl;.ic.c:':i.q.:. MACHINE COMPANY 400
More informationMAIN PARTS
MAIN PARTS 7 8 9 10 11 12 13 1 2 3 17 4 5 6 01 02 03 04 05 12 23 34 45 56 13 24 35 46 57 14 25 36 47 58 15 16 26 27 37 38 48 49 59 60 06 07 08 09 10 17 18 28 29 39 40 50 51 61 62 19 30 41 52 63 20 21 31
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationOperating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationHeadstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
More informationDi-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
More informationCONTENTS LOCATE AND IDENTIFY THE PARTS... WIND THE BOBBIN... PREPARE YOUR TOP THREAD... STITCH SELECTOR / STITCH LENGTH/STITCH WIDTH CONTROLS...
SERVICE MANUAL SEWING MACHINE MODEL 385. 15208400 OCTOBER, 2003 CONTENTS LOCATE AND IDENTIFY THE PARTS... WIND THE BOBBIN... PREPARE YOUR TOP THREAD... STITCH SELECTOR / STITCH LENGTH/STITCH WIDTH CONTROLS...
More informationINSTRUCTIONS and PARTS BOOK for U.S. MACHINES
NSTRUCTONS and PARTS BOOK for U.S. MACHNES BASC and SPECAL PARTS for All SKP STTCH MODELS SUCH AS: 18,18-1,1 18, 118-1, 58, 58-1, 58-C, 58-K 518, 518-1, 518-2, 518-9, 518-A, 518-C, 518-PR, 5 18-PRB U.
More information1-NEEDLE, TOP AND BOTTOM FEED LOCKSTITCH MACHINE WITH A LARGE HOOK DU-1181 DU-1181N ENGINEER S MANUAL No.E371-00
1-NEEDLE, TOP AND BOTTOM FEED LOCKSTITCH MACHINE WITH A LARGE HOOK DU-1181 DU-1181N ENGINEER S MANUAL 40040471 No.E371-00 Introduction This Engineer s Manual is for technical service engineers. In the
More informationSTYLES 53700B 53800B ADJUSTING INSTRUCTIONS AND ILLUSTRATED PARTS LIST CATALOG NO. 100L-GR STREAMLINED FIFTY THOUSAND SERIES FIRST EDITION 01/23/09
STYLES 53700B 53800B ADJUSTING INSTRUCTIONS AND ILLUSTRATED PARTS LIST STREAMLINED FIFTY THOUSAND SERIES CATALOG NO. 00L-GR FIRST EDITION 0/3/09 MANUAL NO. 00L-GR ADJUSTING INSTRUCTIONS AND LLUSTRATED
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationHEADSTOCK (CASTNG & CONTROLS)
HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR
More informationINSTRUCTION BX1425P,PSM,PTV BX1433P,PSM,PTV BX1025P,PSM BX1033P,PSM. No First published : November 1997
INSTRUCTION Industrial Sewing Machines BX1425P,PSM,PTV BX1433P,PSM,PTV BX1025P,PSM BX1033P,PSM First published : November 1997 No. 970112 INTRODUCTION Thank you for your purchasing Kansai Special's BX
More informationBASE, COLUMN, ARM AND TABLE
SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the
More informationSEWING MACHINE - SINGLE NEEDLE
SEWING MACHINE - SINGLE NEEDLE 03914 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight
More informationBell and Howell Spare Parts from MTS
Telephone: 01708 377444 Part No. Description Location in B&H Manual BH053014 Envelope opener valve Fig 12-41 BH053025 Roller assy cam follower Fig 2-38 & 3-67 & 8-43, 62 & 12-28 BH053210 Table lock handle
More informationSpare Parts Catalogue
. ^ (PFAFF) Spare Parts Catalogue PFAFF 238 ^.. m PFAFF INDUSTRIEMASCHINEN GJVtBH KAISERSLAUTERN No. 296h-12-10 070 Aengl. HD 669 Printed in Germany Foreword All component parts are grouped together as
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More information11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.
More informationSERVICE MANUAL FOR DT4-B281 FOUR NEEDLE DOUBLE CHAIN STITCHER WITH PULLER. From the library of: Superior Sewing Machine & Supply LLC
SERVICE MANUAL FOR DT4-B281 FOUR NEEDLE DOUBLE CHAIN STITCHER WITH PULLER Table of Contents [A] Model Plate Display... 1 [B] Specifications... 2 [C] Description of Mechanism... 3 [) Needle bar mechanism...
More informationt..j; ::.:~f"", ~ ~,r>:. f-.~ ~ r'o.f"<.. "
_. De~artmet 154 tj; ::.:~f, ~ ~,r>:. f-.~ ~ r'o.f< : ~ --'.: :. ~.,.,J :.,! ~ ~,. \. ~', r-' f ' - - --.: -.- ----. List of Parts Complete for MacbLe Ho. 109-721 VS:C August 19, 1947 Departmet 154 Bo.
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More information63601 PARTS LIST ILLUS NO. PART NO. DESCRIPTION QTY.
63601 PARTS LIST DRAWING NO. 1 1 W-A63601730 Right Cover 1 M-O63601150 Right Hand Insulation 1 2 W-A63601735 Left Cover 1 M-O63601149 Left Hand Insulation 1 3 M-S63601080 48XLO50 Belt 1 4 M-S63601081 Motor
More informationExploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
More informationMF-7524 INSTRUCTION MANUAL
MF-7524 INSTRUCTION MANUAL 1 CONTENTS Ⅰ. SPECIFICATIONS...1 Ⅱ. CONFIGURATION OF THE MACHINE COMPONENTS...2 Ⅲ. INSTALLATION... 3 1. Installing the machine head onto the table...3 2. Selecting the motor
More informationADJUSTMENT MANUAL. This adjustment manual applies to machines from the following serial numbers onwards: #
45 46 ADJUSTMENT MANUAL This adjustment manual applies to machines from the following serial numbers onwards: # 6 500 4 96--9 00/00 Justieranleitung engl. 0. The reprinting, copying or translation of PFAFF
More informationSINGLE HEAD PARTS LIST VERSION:03000V1. RiCOMA(Shenzhen)Co.,Ltd.
SINGLE HEAD PARTS LIST VERSION:03000V1 RiCOMA(Shenzhen)Co.,Ltd. INDEX 01 TABLE GUARD COVER 02 02 ROTARY HOOK BASE 04 03 TRIMMING PART 06 03-2 TRIMMING PART 10 04 ARM 12 0 NEEDLE BAR DRIVING PARTS 16 06
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationI F L CONSOLIDATED SEWING MACHINE CORP. From the library of: Superior Sewing Machine & Supply LLC Specifications subject to change without notice.
L CONSOLDATED SEWNG MACHNE CORP. F Specifications subject to change without notice. 2003 Consew 803 Printed in USA TABLE OF CONTENTS 133. GENERAL DESCRPTON Page 1 Special features...,......... 2 Names
More informationPFAFF. rom the library of: Superior Sewing Machine & Supply LLC. Service Manual Justieranl. engi. 7.92
PFAFF 5642 Service Manual 296-12-13925 Justieranl. engi. 7.92 Notes on safety The machine must only be commissioned in full knowledge of the instruction book and operated by persons with appropriate training.
More informationParts list MRACH SVP Worldwide - All rights reserved.
Parts list 0 SVP Worldwide - All rights reserved. 0 MRACH 0 A 9 8 0 9 8 0 0 0 8 9 980 THREAD GUIDE CPL. 90 REEL PIN 0 PLATE SPRING 980 SCREW 0*0 FZB KOMBITORX 0 THREAD REEL PIN 00 COVER THREAD KNIFE CPL.
More informationSECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationGEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
More informationCATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
More informationPARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
More informationSymbols used. Move the part in the direction of the arrow. Set the clearance as indicated. Move the part to its highest or lowest position.
4.1999. This service manual was compiled for use when repairing the XL5300, 5200, 5100, 5030, 5020, 5010,PX300,200,100 Zigzag Stitch Sewing Machines. Use this manual, together with the Parts Catalog, when
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationG0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationTECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS UST) FOR
TECHNICAL MANUAL OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS UST) FOR MILLING MACHINE MODEL NO. 4 (BURKE DIVISION POWERMATIC/HOUDAILLE, INC.)
More information