PARTS LIST. SCHflSSs. Nos. 133w102 and 133w 103 A/^CHINES THE SINGER MANUFACTURING COMPANY. From the library of: Superior Sewing Machine & Supply LLC

Transcription

1 Forir 2787w (841 ) Printed, in U. Sr-A. LIST OF PARTS SCHflSSs A/^CHINES Nos. 133w102 and 133w 103 THE SINGER MANUFACTURING COMPANY

2 Copyright, U. S. A., 1938, 1939, 1940 and 1941 by Tho Singer Manufacturing Co. All Rights Reserved for all Countries

3 INDEX Accessories 15 Bobbin Winder 14 Cord Guide 16 Machine No. 13^102 5 Machine No.l33wlOS 12 Miscellaneous Parts 17 Numerical List of Parts 19 Thread Unwinder...15

4 INSTRUCTIONS FOR ORDERING In ordering from this list, use ONLY the PART nisnber in the FIRST column. The number stamped on a Sewing Machine Fart Is the num ber of the Single Part only^ except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on. Small Wires riveted, or Parts soldered together, etc.,which It Is necessary to furnish In combination. Every combination of parts sent out has Its specific number which, although not stamped on Parts (except In above case), must be used when ordering the combination. Each number always Indicates the SAME PART In whatever list It appears, or for whatever Machine. The letters after some of the numbers Indicate the style of finish only, as follows: A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. Soft, not polished. F. Hardened and Polished. H. Blued. J. Nickel Plated only. R. Merllzed. X. Black OKlde. XC. Hardened and Black Oxide. Y. Black Nickel only. These letters MUST BE USED when they appear In the list and AFTER the number, as In the list. In this series: to and to are Screw Numbers to and to are Nut Numbers to and to are Roller Numbers. 202Ci01 to are Numbers of Machine Parts. The figures In the second colximn refer only to the plate In which the illustration of the pai>t Is shown and are NOT TO BE USED In ordering. Two or more numbers over a cut Indicate that the dif ference between such parts Is not visible in an Illustra tion. Parts marked with an asterisk ( } are furnished when repairs are made at the factory.

5 LIST OF PARTS COMPLETE SINGER % HIGH SPEED. A\ACHINE No. 133w 102 GEAR DRIVEN ROTARY HOOK. LOCK STITCH. For Flat Stitch Embroidery and Madeira Eyelets. Using Left Twist Artificial Silk. Needle Vibrates to and from the Operator, Maximum Throw ^/iq inch. No H S E B C Name Arm with " Cap " " Screw " " " Washer " Position Pin (2) " Screw (3) " " Washer (3) " Shaft with and E " " Bushing (back) with " " " Oil Packing (wick) " " " (front) with " " " " Oil Packing (wick) " " " " " " Thumb Screw Arm Shaft Bushing Set Screw (2) " " Oil Packing (wick)

6 6 PARTS FOR A\ACHINE No. I33wl02 No. Plate Name E Am Shaft Oil Packing Stop Screw " Side Oover B " " Thumb Screw Balance Wheel (disc)(belt groove 2-3/8 In.. dlam.) with and H Balance Wheel Adjusting Screw C Position Screw " " Set Screw * Bed " Slide (front) Bobbin " Oase Base " Oap with ,201016F and Bobbin Case Cap complete,nos , , and Bobbin Oase Latch " with and Bobbin Oase Latch Fulcmim Pin " Lever " Spring " " " Stop Screw " " Stop D " Screw " " Tension Spring F " " " " Regulating Screw Bobbin Oase Tension Spring Screw " " complete,nos and Face Plate " " Position Pin B " " Thumb Screw Hook with and two " with , ,240905, and two F Hook and Bobbin Oase complete,nos and Hook Gib " " Hinge Screw F " " Screw (2) " Oiling Felt " Set Screw " Shaft " " Bevel Gear with two E " " Guard Oil Stop Screw 50234D (1 II It It It II 11 II It II 11 II n II It II Washer (leather) 121E Hook Shaft Bevel Gear Guard Screw * " Section (back)

7 PARTS FOR MACHINE No. I33wl02 No. Plate Name * Hook Shaft Bevel Gear Guard Section (front) Hook Shaft Bevel Gear Guard complete,nos, 121E,50234D,201318E,241171, and 1253C C C C C C C * C Hook Shaft Bevel Gear Set Screw Bushing (back) with " " Oil Packing (wick) Hook Shaft Bushing (back) Set Screw " " (front) with " " Bushing (front) Oil Packing (wick) Hook Shaft Bushing (front) Set Screw " Collar with C Set Screw " Washer Needle Guard (for embroidery work) Hook Washer Needle Guard Screw Needle Bar (hollow) with F " " Connecting Link " Stud with Needle Bar Connecting Link Stud Oil Pack ing (wick) Needle Bar Connecting Link Stud Set Screw ti n ti II n tt n Stud " " " with C and Needle Bar Connecting Stud Oil Packing (wick) Needle Bar Connecting Stud Pinch Screw " " Crank with C,200374C, C,200428C and Needle Bar Crank Friction Washer C " " " Position Screw C " Set Screw " " Rock Frame " " " " Hinge Stud (eccen tric) C Needle Bar Rock Frame Hinge Stud Set Screw " " " " " " Sleeve (split) F Needle Bar Rock Frame Position Bracket " " " " " Screw " Rock Shaft " " with C and Needle Bar Rock Frame Rock Shaft Crank with E

8 PARTS FOR AAACHINE No. I33wl02 No. Plate Name Needle Bar Rock Frame Rock Shaft Crank Connection C Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw (2) E Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Nut (2) E Needle Bar Rock Frame Rock Shaft Crank Pinch Screw Needle Bar Rock Frame Slide Block " " " " " " With C C Needle Bar Rock Frame Slide Block Stud C " " " " " " " Set Screw F Needle Set Screw " Vibrating Cam and Gear " " " " " Driving Gear with two C C Needle Vibrating Cam and Gear Driving Gear Set Screw Needle Vibrating Cam and Gear Shaft " " " " " " Collar with two C C Needle Vibrating Cam and Gear Shaft Collar Set Screw C Needle Vibrating Cam and Gear Shaft Set Screw Needle Vibrating Fork Lever with C " n» n Connection Lever Needle Vibrating Fork Lever Connection Lever Hinge Stud Needle Vibrating Fork Lever Connection Lever Hinge Stud Collar with 20038DC 200S80C Needle Vibrating Fork Lever Connection Lever Hinge Stud Collar Set Screw C Needle Vibrating Fork Lever Connection Lever Hinge Stud Set Screw C Needle vibrating Fork Lever Hinge Screw E " " " " " " NUt " Vibration Regulating Bell Crank with C and C Needle Vibration Regulating Bell Crank Link Needle Vibration Regulating Bell Crank Link Hinge Pin C Needle Vibration Regulating Bell Crank Link Hinge Pin Set Screw C Needle Vibration Regulating Bell Crank Link Hinge Screw E Needle Vibration Regulating Bell Crank Link Hinge Screw Nut

9 PARTS FOR A^ACHINE No. I33wl02 No. Plate Name C Needle Vibration Regulating Bell Crank Position Screw C Needle Vibration Regulating Bell Crank Set Screw Needle Vibration Regulating Bracket with C Needle Vibration Regulating Bracket Collar with two C C Needle Vibration Regulating Bracket Collar Set Screw C Needle Vibration Regulating Bracket Lock ing Thumb Screw Needle Vibration Regulating Bracket Lock ing ThunO) Screw Packing (brass) Needle Vibration Regulating Bracket Po sition Lever with C,200440C, E and two C E Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Bushing C Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Bushing Set Screw Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Cap Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Spring C Needle Vibration Regulating Bracket Po sition Lever Position Screw C Needle Vibration Regulating Bracket Po sition Lever Set Screw Needle Vibration Regulating Lever with C and C Needle Vibration Regulating Lever Con nection H Needle Vibration Regulating Lever Con nection Hinge Screw (Icwer) C Needle Vibration Regulating Lever Con nection Hinge Screw (upper) C Needle Vibration Regulating Lever Oper ating Rod Thumb Screw C Needle Vibration Regulating Lever Set Screw Needle Vibration Regulating Lever Shaft " " Stop Lever " wjth C,200440C,201170C, two each C and E C Needle Vibration Stop Lever Position Screw

10 10 PARTS FOR MACHINE No. I33wl02 No. Plate Name C Needle Vibration Stop Lever Set Screw " " " " Shaft C " " " " Stop Screw (lower) Needle Vibration Stop Lever Stop Screw (upper) E Needle Vibration Stop Lever Stop Screw (upper) Nut E Needle Vibration Stop Lever Stop Screw Stud (2) D Needle Vibration Stop Lever Stop Screw Stud Thumb Nut (2) Needle Vibration stop Lever Thumb Set Screw Presser Bar (hollow) " " Bushing " " " Set Screw " " Lifter " " " Hinge Screw " " Lifting Bracket with " " " " Set Screw " " Position Guide " Lever with F F Presser Bar Position Guide Lever Pinch Screw Presser Bar Position Guide Set Screw " " Spring B " " Thumb Screw (pressure regu lating) B Presser Bar Thumb Screw Thumb Set Screw " " " " " " " Packing (brass) Presser Foot Olamplng Rod B " " " " Thumb Nut Take-up Lever " " Driving Stud with " " " " Oil Packing (wick) Take-up Lever Hinge Stud with " " " " Oil Packing (wick) " " " " Set Screw " " Oiling Felt E " " " " Screw Tension Disc " Release Washer " Spring " " Washer F " Stud with " " Set Screw " " Washer

11 PARTS FOR A\ACHINE No. I33wl02 11 No B Plate 15S S E C E H H D XC Name Tension Thumb Nut Tension complete,nos f,201572b, ,240927,244061, and two Thread Oheck Disc Screw Stud Spring Thumb Nut Washer (felt) " (steel) Thread Oheck coraplete,nos.15600,2102, , and E Thread Oontroller Spring " " Stop " " " " Screw " Guide " " (upper) " " Screw (2) " Retainer " " Set Screw Throat Plate " " Needle Plate " " " " Locking Slide tt tt n tt ti ti Screw (2) Throat Plate Screw (2) Vertical Shaft " " Bevel Gear (lower) with two Vertical Shaft Bevel Gear (lower) Set Screw Vertical Shaft Bevel Gear (upper) with two Vertical Shaft Bevel Gear (upper) Set Screw Vertical Shaft Bushing (lower) with " " Oil Packing (wick) Vertical Shaft Bushing (upper) with " Oil Packing (wick) Vertical Shaft Bushing Set Screw (2) " " Driving Gear with two Vertical Shaft Driving Gear Set Screw

12 12 AAACHINE No. 133w 103 HI6H SPEED. GEAR DRIVEN ROTARY HOOK. LOCK STITCH. For Flat Stitch Embroidery Only. Using Left Twist Artificial Sillc. Needle Vibrates to and from the Operator, Maximum Throw ^/iq inch. The same as Machine No.l3&7l02 with the following exceptions: No. Plate Name Am Cap " " Cord Holder " " Spool Holder Base " " " " " Bracket 2005B5H " " " " " " Screw H " " " " " Screw " " " " Wire H " " " " " Hinge Screw Am Cap Spool Holder complete,nos H, and Arm Cap and Spool Holder complete,nos H,204297,228394,240917, and two H Cord Guide Lever with 837B and 1674B 837B " " " Adjusting Screw 1674B " " " " " Lock Nut " " " Bracket " " " FVlctlon Washer E " " " Hinge Screw E " " " " " Nut " " Tube " " " Holder with 2273 and two B B B Cord Guide Tube Holder Adjusting Screw Hinge Pin " " " " Spring " " " Set Screw Cord Guide complete,nos.19044,201531e, ,240866, to and E Throat Plate Needle Plate

13 13 ACCESSORIES FOR MACHINE NO. I33w[02 No. Plate «225482» B X Name Bobbin (5) " Case Screw Driver Blade " " " Handle Bobbin Case Screw Driver complete»nos and Eyelet Piercer with B Holder " " Thximb Screw Eyelet Piercer (adjustable) for eyelets from 5/64 to 1/4 in. diam.,complete,noa and Eyelet Punch,.067 in. diameter.055 in. diameter 7/64 in. diameter 5/32 in. diameter 9/64 in. diameter 3/32 in. diameter Needles,three each, sizes 12 and 14 Presser Foot,for Eyelets 3/32 in. diame ter Presser Foot,for Eyelets 7/64 in. diameter " 11/64 in. diameter " " " 1/4 in. diameter Throat Plate Needle Plate " Spur,for Eyelets 3/32 in. diameter Throat Plate Spur,for Eyelets 11/64 in. diameter Throat Plate Spur,for Eyelets 7/64 in. diameter Throat Plate Spur,for Eyelets 1/4 in. diameter Drip Pan with four 3/4 in. wire nails Embroidery Hoop,12 inch Eyelet Punch Cutting Block (fiber) " Mallet (wood) Machine Hinge Connection (2) " Rest Pin (wood) Needle Vibration Regulating Lever Operat ing Rod Needle Vibration Rerpjlating Lever Operat ing Rod With 2767 Needle Vibration Regulating Lever operat ing Rod Knee Plate with 356C

14 14 ACCESSORIES No. Plate Name S56C Needle Vibration Regulating Lever Operat ing Rod Knee Plate Set Screw Oiler (copper plated) with " Spout (3-1/2 In.long) Screw Driver (7-1/4 In. long) Wrench (steel) BOBBIN WINDER (SWINOINe AUTOMATIC, RI6HT HAND) Brake (leather) " Clamp F " " Screw Frame with and " Hinge Pin " Oil Packing (wick) " " Well Cap " Spring " " Plunger Pulley with C C " Set Screw Spindle Stop Latch E " " Screw " " Thumb Lever " " " " Hinge Stud " " " " Joint Stud " " Trip Lever H " " " " Hinge Screw Tension Bracket with B D " " Screw " " " Washer " Disc " Spring B " Stud B " " Thumb Nut Bobbin Winder Tension Bracket complete,nos , , and two Bobbin Winder and Tension Bracket Base Universal Bobbin Winder complete,nos E,200082D,200113F,200299H,202478, ,225381,225444, to , ,225462,228026, to , two each and wood screws 3/4 In. No.l2,R. H.B.

15 ACCESSORIES 15 THREAD UNWINDER No. Plate C C J )lL Name Spool Rest (for two spools)(flat) with C Spool Rest Cushion (felt) " " Rod " Set Screw " " Set Screw " Stand with Thread Guide " " Lock Nut Position Cup " Rod with 208AL and " Screw " " " Washer Thread Unwinder (for two spools)(flat) complete,nos j,202490,225257, ,225326,225388,two each , and three wood screws 7/8 in. No. 12 FOR MACHINE NO. I33wl Bobbin (5) « " Case Screw Driver Blade « " " " " Handle Bobbin Case Screw Driver complete,nos and X 11 Needles,three each,sizes 12 and Throat Plate Needle Plate Drip Pan with four 3/4 In. wire nails Elnbroldery Hoop,12 Inch Machine Hinge Connection (2) " Rest Pin (wood) Needle Vibration Regulating Lever Operat ing Rod Needle Vibration Regulating Lever Operat ing Rod with Needle Vibration Regulating Lever Operat ing Rod Knee Plate with 356C 356C Needle Vibration Regulating Lever Operat ing Rod Knee Plate Set Screw

16 16 ACCESSORIES No. Plate Name Oiler (copper plated) with " Spout (3-1/2 In.lons) Scrw Driver (7-1/4 In. long) Spool Pin Wrench (steel) Universal Bobbin Winder complete,nos E, D, F,200299H,202478, ,225381,225444, to , ,225462,228026, to two each and wood screws 3/4 In. No.l2,R. H.B. For Itemized list of bobbin winder parts see page 14 CORD GUIDE Cord Guide Lever with 8S7B and 1674B 837B " " " Adjusting Screw 1674B " " " " " Lock Nut Bracket " " " Friction Washer E " " " Hinge Screw E " Nut " " Tube " " " Holder with 2273 and two B B Cord Guide Tube Holder Adjusting Screw " " " " Hinge Pin " " " " Spring B " " " Set Screw Cord Guide complete,nos.19044,201531r, ,240866, to and E

17 MISCELLANEOUS PARTS Used In conjunction with thread unwinder No. Plate Name Spool Weight with " " Center Pin " Wire,for small spools Thread Cone (wood) " Holder Genuine Singer Needles should be used in Singer Machines. These Needles and their Containers are marked with the Company'sTrade Mark "SIMANCO." 1 Needles in Containers marked "For Singer Machines" are not Singer made needles. 2

18 Genuine Singer Needles should be used in Singer Machines. These Needles and their Containers are marked with the Company'sTrade Mark "SIMANCO." 1 Needles in Containers marked "For Singer Machines" are not Singer made needles. 2

19 %s>-- NUMERICAL LIST OF PARTS

20 19 NUMERICAL LIST OF PARTS No. Plate Name 121E Hook Shaft Bevel Gear Guard Screw,for 208AL Thread Unwinder Thread Guide Rod Screw, for Needle Vibration Regulating Lever Operat ing Rod Knee Plate Set Screw,for B Cord Guide Lever Adjusting Screw,for Hook Set Screw,for " Shaft Bevel Gear Set Screw,for Vertical Shaft Bevel Gear (lov/er) Set Screw,for Thread Check Thumb Nut,for B Cord Guide Lever Adjusting Screw Lock Nut for Bobbin Winder Tension Disc,for Thread Check Disc,for Cord Guide Tube Holder Hinge Pin,for Needle vibration Regulating Lever Operat ing Rod Knee Plate with 3560,for Machine Hinge Connection Bobbin Winder Tension Spring,for Thread Check Spring,for Cord Guide Lever Prlctlon Washer,for Thread Cone (wood) Machine Rest Pin (wood) 50234D Hook Shaft Bevel Gear Guard Oil Stop Screw,for Spool Weight with " " Center Pin,for Oiler (copper plated) with " Spout (3-1/2 In. long),for Thread Unwinder Spool Rest Cushion (felt) for E Arm Screw E Needle Bar Rock Frame Rock ShaXt Crank Pinch Screw,for E Bobbin Winder Stop Latch Screw,for C Tension Stud Set Screw H Arm Cap Spool Holder Wire Hinge Screw,for

21 20 NUMERICAL LIST OF PARTS No. Plate Name D Bobbin Case Stop Screw 200C82D " Winder Tension Bracket Screw,for C Needle Bar Connecting Stud Pinch Screw, for F Presser Bar Position Guide Lever Pinch Screw,for F Needle Bar Rock Frame Position Bracket Screv/ C Vertical Shaft Bevel Gear (upper) Set Screw,for F Bobbin Winder Brake Clamp Screw,for E Take-up Lever Oiling Felt Screw E Thread Controller Spring Stop Screw F Needle Set Screw, for C Hook V/asher Needle Guard Screw,for 2409C E Throat Plate Needle Plate Locking Slide Screw H Needle Vibration Regulating Lever Con nection Hinge Screw (lower) H Arm Cap Screw H Bobbin Winder Stop Latch Trip Lever Hinge Screw,for C Needle Vibrating Cam and Gear Shaft Set Screw C Vertical Shaft Bushing Set Screw C Balance Wheel Position Screw,for C Balance Wheel Set Screw,for C Needle Bar Crank Set Screw,for " Vibration Stop Lever Stop Screw (upper),for and S38C Arm Shaft Bushing Set Screw C Hook Shaft Bushing (back) Set Screw 200S47C Needle Bar Rock Frame Hinge Stud Set Screw C Presser Bar Bushing Set Screw C " " Position Guide Set Screw C Hook Shaft Bushing (front) Set Screw C Needle Vibrating Cam and Gear Driving Gear Set Screw,for C Needle Vibration Regulating Bracket Posi tion Lever Locking Screw Stud Bushing Set Screw,for C Needle Vibration Regulating Bracket Po sition Lever Set Screw,for S63C Vertical Shaft Driving Gear Set Screw,for S66H Thread Retainer Set Screw

22 NUMERICAL LIST OF PARTS 21 No. Plate Name C Needle Bar Connecting Link Stud Set Screw, for Needle Vibrating Fork Lever Connection Lever Hinge Stud Set Screw C Needle Vibration Stop Lever Set Screw, for C Needle Vibration Regulating Bell Crank Set Screw,for S80C Bobbin Winder Pulley Set Screw,for C Needle Vibrating Fork Lever Connection Lever Hinge Stud Collar Set Screw, for C Needle Bar Connecting Link Stud Set Screw for C Take-up Lever Hinge Stud Set Screw C Thread Unwinder Spool Rest Rod Set Screw for C Needle Bar Rock Frame Slide Block Stud Set Screw,for C Needle Vibration Regulating Bracket Collar Set Screw,for C Presser Bar Lifting Bracket Set Screw,for C Needle Vibrating Cam and Gear Shaft Collar Set Screw,for 21SL C Needle Vibration Regulating Bell Crank Link Hinge Pin Set Screw,for C Needle Bar Crank Position Screw,for C Needle Vibration Regulating Bracket Posi tion Lever Position Screw, for C Needle Vibration Stop Lever Position Screw,for B Am Side Cover Thumb Screw B Eyelet Piercer Thumb Screw,for SB Face Plate Thumb Screw B Presser Bar Thumb Screw Thumb Set Screw B Presser Bar Thumb Screw (pressure regulat ing) B Am Shaft Bushing (front) Oil Packing Thumb Screw H Am Cap Spool Holder Base Screw,for XC Throat Plate Screw H Thread Guide Screw H Am Cap Spool Holder Base Bracket Screw, for F Hook Gib Screw,for C Bobbin Case Tension Spring Screw,for C Hook Gib Hinge Screw,for F Tension Stud with ,for C Presser Bar Lifter Hinge Screw

23 22 NUMERICAL LIST OF PARTS No. Plate C E C C C F C C C C C C C C C E B E E E E E B B B J D Name Needle Vibration Regulating Lever Con nection Hinge Screw {upper} Needle Vibration Regulating Bracket Po sition Lever Locking Screw Stud Bobbin Case Latch Stop Screw,for Needle Vibrating Fork Lever Hinge Screw " Vibration Regulating Lever Set Screw,for Bobbin Case Tension Spring Regulating Screw,for Thread Unwinder Spool Rest Set Screw, for Hook Shaft Collar Set Screw,for Needle Bar Rock Frame Slide Block Stud, for Needle Vibration Regulating Bracket Lock ing Thumb Screw Needle Vibration Regulating Lever Operat ing Rod Thumb Screw,for Needle Vibration Stop Lever Thumb Set Screw,for Needle Vibration Regulating Bell Crank Position Screw,for Needle Vibration Stop Lever Stop Screw (lower),for Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Hook Shaft Bevel Gear Guard Oil Stop Screw,for Bobbin Winder Tension Stud,for Needle Bar Rock Frame Rock Shaft Crank Connection Hinge Screw Nut Needle Vibrating Fork Lever Hinge Screw Nut Needle Vibration Regulating Bell Crank Link Hinge Screw Nut Cord Guide Lever Hinge Screw Nut,for Needle Vibration Stop Lever Stop Screw (upper) Nut,for and Bobbin Winder Tension Stud Thumb Nut,for Tension Thumb Nut,for Presser Foot Clamping Rod Thumb Nut Thread Unwinder Thread Guide Lock Nut, for Needle Vibration Stop Lever Stop Screw Stud Thumb Nut Arm Screw Washer " Cap Spool Holder Base,for Face Plate Position Pin,for

24 NUMERICAL LIST OF PARTS 23 No. Plate Name Arm Shaft Bushing (front) Oil Packing (wick),for Arm Cap Screv; Washer Needle Bar Connecting Link Stud Oil Pack ing (wick),for Am Shaft Bushing (back) Oil Packing (wick),for Bobbin Winder Frame Oil Packing (wick) for Zr Take-up Lever Driving Stud Oil Packing (wick),for Needle Bar Connecting Stud with C and Needle Bar Connecting Stud Oil Packing (wick),for Needle Bar Connecting Link Stud with ,for Presser Bar Position Guide Lever with F Presser Bar Thumb Screw Thumb Set Screw Packing (brass) Take-up Lever Driving Stud with " Hinge Stud with " " Oiling Pelt Tension Disc,for Spring,for Thread Controller Spring Stop Hook Shaft Bushing (back) Oil Packing (wick),for Take-up Lever Hinge Stud Oil Packing (wick),for Vertical Shaft Bushing (lower) Oil Packing (wick),for Vertical Shaft Bushing (upper) Oil Packing (wick),for Bobbin Winder Stop Latch Trip Lever,for Thread Unwinder Spool Stand with C, for Presser Bar Lifter Needle Vibrating Fork Lever Connection Lever Hinge Stud Collar with C Needle Bar Rock Frame Position Bracket " " " Slide Block,for Needle Bar (hollow) with F " " Crank Friction Washer Am Position Pin " Cap Spool Holder Wire,for Am Cap Spool Holder complete,nos h, and ,for Tension Stud Washer,for F

25 24 NUMERICAL LIST OF PARTS No. Plate Name Needle Vibration Reeulatlng Bracket Po sition Lever Locking Screw Stud Spring» Needle Bar Connecting Stud,for Arm Shaft Bushing (front) with Presser Bar Spring Embroidery Hoop,12 Inch Needle Bar Crank with C,200374C, C,200428C and Bobbin Case Latch Lever,for " " " Fulcrum Pin,for " " " Spring,for " " " for " " " With and ,for Needle Bar Rock FTame Slide Block with C,for Needle Vibrating Cam and Gear Shaft Collar with two C Arm Shaft Bushing (back) with " Cap Thread Guide Needle Vibration Regulating Bracket Posi tion Lever Locking Screw Stud Cap Arm Shaft Oil Packing (wick),for Bobbin Case Base,for " Cap with C,201016F and ,for Bobbin Case Cap complete,nos c, , and ,for Bobbin Case complete,nos and ,for Bobbin Case Tension Spring,for Thread Unwinder Spool Rest (for two spools) (flat) with C,for Thread Unwinder (for two spools) complete. Nos J,202490,225257,225324, ,two each , and three wood screws 7/8 In., No Thread Unwinder Thread Guide Rod Washer, for Thread Unwinder Thread Guide Rod with 208AL and ,for Thread Unwinder Thread Guide Position Cup, for Bobbin Winder Pulley with 200S80C,for Spool wire,for small spools Bobbin Winder Spindle,for Thread Unwinder Spool Rest Rod,for Thread Cone Holder

26 NUMERICAL LIST OF PARTS 25 No Plate Nos Name Thread Unwinder Thread Guide,for Spool Pin Bobbin Winder Frame Oil Well Cap,for Bobbin Winder Stop Latch,for to ,for Bobbin Winder Frame with and Bobbin Winder Frame Hinge Pin " " " Spring " " " " Plunger " " Stop Latch Thumb Lever,for Bobbin Winder Stop Latch Thumb Lever Hinge Stud,for Bobbin Winder Stop Latch Thumb Lever Joint Stud,for Bobbin Winder Tension Bracket with B for Bobbin Winder Tension Bracket complete,nos ,201572b, and two 2102,for Bobbin Case Screw Driver Blade,for " " " Handle,for * * Bobbin Case Screw Driver complete,nos and Screw Driver (7-1/4 In.long) Wrench (steel) Hook Shaft Collar with C Bobbin Winder Tension Bracket Screw Washer for Arm Cap Cord Holder,for Throat Plate Needle Plate Cord Guide 'IUbe,for Presser Bar Bushing Throat Plate Spur,for Eyelets 7/64 In. diameter,for Machine No.l33wl02 Nos to ,for Machine No.l3afl02 Eyelet Punch,.067 In. diameter ".055 In. diameter " 7/64 In. diameter " 5/32 In. diameter " 9/64 In. diameter " 3/32 In. diameter Piercer with B,for " Holder,for Eyelet Piercer (adjustable),for eyelets from 5/64 to 1/4 In. dlam.,complete,nos and ,for Machine No.l33wl02 Eyelet Punch Cutting Block (fiber),for Machine No.l33wl02

27 26 NUMERICAL LIST OF PARTS No. Plate Name Eyelet Punch Mallet (wood),for Machine No.l33wl Throat Plate Spur,for Eyelets 1/4 In. diameter, for Machine No.l3a7l Thread Guide (upper) Arm Shaft with and E Take-up Lever Balance Wheel (disc)(belt groove 2-3/8 In. dlam,) with C and C Needle Bar Connecting Link Thread Retainer Arm with " Side Cover Bed Bed Slide (front) Face Plate Hook Shaft Needle Bar Rock Frame " " " " Hinge Stud (eccen tric) Needle Bar Rock Frame Hinge Stud Sleeve (split) Needle Bar Rock Frame Rock Shaft,for Needle Bar Rock Frame Rock Shaft Crank with E Needle Bar Rock Frame Rock Shaft Crank Connection Needle Vibrating Cam and Gear " " " " " Driving Gear with two C Needle Vibrating Fork Lever with C " Connection Lever Needle Vibrating Fork Lever Connection Lever Hinge Stud Needle Vibrating Cam and Gear Shaft " Vibration Regulating Bell Crank with C and C Needle Vibration Regulating Bell Crank Link Needle Vibration Regulating Bell Crank Link Hinge Pin Needle Vibration Regulating Bracket with C Needle Vibration Regulating Bracket Collar with two C Needle Vibration Regulating Bracket Lock ing Thumb Screw Packing (brass) Needle Vibration Stop Lever,for " ««« with , ,201170C,tWO each C and E

28 NUMERICAL LIST OF PARTS 27 No. Plate NOS Name Needle Vibration Regulating Bracket Position Lever Locking Screw Stud Bushing Needle Vibration Regulating Lever with C and C Needle Vibration Regulating Lever Connec tion Needle Vibration Regulating Lever Operat ing Rod,for Needle Vibration Regulating Lever Shaft " " Bracket Po sition Lever with , , E and two Needle Vibration Stop Lever Shaft Presser Bar (hollow) " " Lifting Bracket with " " Position Guide to ,for Machine No.l33wl02 Presser Foot,for Eyelets 3/32 In. diame ter Presser Foot,for Eyelets 7/64 In. diame ter Presser Foot,for Eyelets 11/64 In. diame ter Presser Foot,for Eyelets 1/4 In. diameter " " Clamping Rod Throat Plate Throat Plate Needle Plate Locking Slide Throat Plate Spur,for Eyelets 3/32 in. diameter, for Machine No.l33wl02 Throat Plate Spur,for Eyelets 11/64 In. diameter,for Machine No. 133wl02 Vertical Shaft Needle Vibration Regulating Lever Operat ing Rod With 2767 Vertical Shaft Bushing (upper) with Cord Guide Tube Holder Spring,for Needle Bar Rock Frame Rock Shaft with and Drip Pan with four 3/4 In. wire nails Vertical Shaft Driving Gear with two Bobbin Case Stop Hook with and two 12530,for Hook with , ,263122, and two F,for Hook and Bobbin Case complete,nos and Hook Washer Needle Guard,(for embroidery work),for

29 28 NUMERICAL LIST OF PARTS Name Am Cap,for " " Spool Holder Base Bracket,for No Plate Am Cap and Spool Holder complete,nos H,204297,228394,240917, and Vifio H,for Machine No.133^ Nos to ,for Cord Guide Lever with 837B and 1674B " " " Bracket " " luhe Holder with 2273 and two B Cord Guide complete,nos.19044,201531e, ,240866, to and E Tension complete,nos f,201572b, ,240927,244061, and two Thread Check Washer Thread Check Washer (felt) for (steel),for Thread Controller Spring,for Throat Plate Needle Plate Thread Check complete,nos.1560c,2102, 13710,240925, and E Hook Shaft Bevel Gear with two 1253C Vertical Shaft Bevel Gear (lower) with two 1253C Hook Shaft Bevel Gear Guard Oil Stop Screw Washer (leather),for « Hook ShEUft Bevel Gear Guard Section (back),for « Hook Shaft Bevel Gear Guard Section (front),for Hook Shaft Bevel Gear Guard complete, Nos.121E,50234D,201318E,241171, and Hook Shaft Bushing (back) with Vertical Shaft Bushing (lower) with Hook Shaft Bushing (front) with " " " Oil Packing (wick),for Tension Release Washer,for Vertical Shaft Bevel Gear (upper) with two C Nos, to ,for Bobbin Winder Brake (leather) " Clamp " " and Tension Bracket Base

30 NUMERICAL LIST OF PARTS 29 No. Plate Name Universal Bobbin Winder complete,nos E,200082D,200113P,200299H, , ,225381,225444, to , ,225462,228026, to two each and wood screws 3/4 In. No.l2,R.H.B Bobbin Tension Spring Washer,for Hook Gib,for " Oiling Felt,for E C Cord Guide Lever Hinge Screw,for Needle Vibration Regulating Bell Crank Link Hinge Screw E Needle Vibration Stop Lever Stop Screw Stud H Balance Wheel Adjusting Screw E Arm Shaft Oil Packing Stop Screw,for B Cord Guide Tube Holder Adjusting Screw, for B Cord Guide Tube Set Screw,for E Thread Check Screw Stud,for

31 Genuine Singer Needles should be used in Singer Machines. These Needles and their Containers are marked with the Company'sTrade Mark "SIMANCO." 1 Needles in Containers marked "For Singer Machines" are not Singer made needles.

32 ILLUSTRATIONS OF PARTS

33 / '/N G e

34 /8

35 2244/ C U UC F OO590C F 1253C C D

36 2U9U C- 2408U2 202iJ C / H C E \ ^ C 1253C

37 E C r200387c.../ C C C E

38 201170C 2U C D E Wmc C C _ 200U40C E C C E C C C C I C \ E , C / ^ V C C C ^ C E

39 200383C J C I C _ ^ U \ 3 7 ilc I ^ >o-w C 2U0B U F

40 200U75B D U ' F C C C

41 F E C E

42

43 lo ^ ft/ ^ ftl CM try :3- lo VO I >o <0 *o *o *o >o =} ^ ST =r =r =1-^ =T IT st sr ST ST ro to K> cry try ro CM CM CM CM CM CM fm tj- ^, i-t CM try =r in iti try iti CO CO 00 CO o o o o =r =T st IT CM CM CM CM ftj ^ ^. CO Oy VO to Ify m =r rh CO CO m o o ^ =f st =f to to

44 / '

45 H

46

47 /2

48 ^ V-.

49 I66I5-1/2 ^^

50 Ve J U 208AL C C /

51 - - 5, -V ' TT.r.-^'." '. T~ '.:">,r \m