ENERGY Wind Turbines. Rotor Hubs Main Frames Slew Rings Main Shafts. Gear Box Housings Torques Supports Gearbox Rings Planetary Carriers.
|
|
|
- Edward Berry
- 5 years ago
- Views:
Transcription
1 ENERGY Wind Turbines Rotor Hubs Main Frames Slew Rings Main Shafts Gear Box Housings Torques Supports Gearbox Rings Planetary Carriers
2 Solutions for rotor hubs 04/ Walter heavy duty milling cutter F2265 for face milling around the holes 07 Walter Titex X treme Step 90 solid carbide step drill for drilling small core holes /06 04 Walter Xtra tec Point Drill B42C for core hole drilling and chamfering Walter shoulder milling cutter Walter BLAXX F5141 for helical interpolation of large holes Walter Xtra tec porcupine cutter F4238 for helical interpolation of small holes 05 Walter side milling cutter F2252 for back facing of large and small holes 06 Walter Precision MAXI B3234 fine boring tool for finishing of large and small holes 08 Walter Xtra tec face milling cutter F43 for countersinking large and small holes 09 Walter Prototyp Paradur Eco Plus for
3 Solutions for main frames 05 Walter Titex Alpha 4 XD-Technology for drilling of ventilation holes 07 Walter Titex X treme Step 90 solid carbide step drill for drilling small holes 04/07/ Walter Xtra tec face milling cutter F43 for machining small faces 08 Walter Prototyp Paradur Eco Plus for Walter heavy duty milling cutter F2265 for face milling 05 Walter Xtra tec Point Drill B42C for drilling and chamfering mounting holes Walter Xtra tec porcupine cutter F4238 for helical interpolation of main bore 06 Walter side milling cutter for roughing of bearing surfaces and rear sides
4 Solutions for slew rings 04/06 05 Walter module milling cutter for milling of internal teeth 05 Walter Xtra tec side milling cutter F4253 for milling of stress relief groove Walter Tiger Tec Silver ISO P generation for rough and finish turning 06 Walter Prototyp Paradur Eco Plus for Walter double turning tool holder for machining the inner contour 04 Walter Xtra tec Point Drill B42C for drilling and chamfering the mounting holes
5 Solutions for main shafts Walter Capto TM for copy turning 05 Walter Xtra tec Insert Drill B4215 for core hole drilling of the mounting holes Walter Capto TM for removing forged skin 04 Walter Tiger Tec Silver ISO P generation for rough and finish turning 06 Walter Prototyp Paradur Eco Plus for Walter Capto TM for finish turning
6 Solutions for gear box housings 04/05 / Walter Precision MAXI B3234 fine boring tool for finishing of holes 06 Walter Xtra tec Point Drill B42C for drilling and chamfering mounting holes flange 08 Walter Xtra tec face milling cutter F43 for machining coupling faces 04 Walter Titex X treme Step 90 solid carbide step drill for drilling mounting holes 07 Walter Xtra tec Insert Drill B4213 for drilling mounting holes Walter Boring MAXI B3220 boring tool for rough boring of holes 05 Walter Prototyp Paradur Eco Plus for 08 Walter side milling cutter F2252 for back facing of holes
7 Solutions for torque supports 04 Walter shoulder milling cutter Walter BLAXX F5141 for helical interpolation and 90 shoulder milling 04 Walter Precision MAXI B3234 fine boring tool for finishing of core bores Walter Xtra tec face milling cutter F43 for surface roughing and finishing Walter Xtra tec Insert Drill B4213 for core hole drilling of mounting holes
8 Solutions for gearbox rings /04 Walter module milling cutter for milling of internal teeth Walter Xtra tec Insert Drill B4215 for short hole drilling of torque and fastening holes Walter Tiger Tec Silver ISO P generation for rough and finish turning 04 Walter Xtra tec Point Drill B40 for deep hole drilling of torque and fastening holes
9 Solutions for planetary carriers 06/07 // Walter Tiger Tec Silver ISO P generation for rough and finish turning 06 Walter Boring MAXI B3220 boring tool for rough boring of large and small holes Walter Capto TM for rough turning faces and shaft 04 Walter Xtra tec face milling cutter F43 for machining faces 07 Walter Precision MAXI B3234 fine boring tool for finishing of large and small holes Walter Capto TM for finish turning faces and shaft 05 Walter Xtra tec Insert Drill B4213 for drilling mounting holes 08 Walter side milling cutter F2252 for back facing of large and small holes
Precision tools for better performance
_ MACHINING EXPERTISE Precision tools for better performance Component solutions Turbocharger PRODUCTIVITY IN THE FAST LANE. High fuel prices are a constant challenge to our mobile society. Energy-saving
Powerful solutions. for your windmill production
Powerful solutions for your windmill production Do you need to boost productivity? Invite a yellow coat. Windmills are fantastic, producing energy from an endless source without waste. Their increasing
We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Live Tools
» Cutting Tools» Angle Heads» Live Tools We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Live Tools Table
Wind power Tooling solutions for all components and all materials from one source
Wind power Tooling solutions for all components and all materials from one source application specific tool materials and coatings innovative geometries for highest accuracy and quality intelligent special
Technology Workpieces and processes in the automotive industry
Technology Workpieces and processes in the automotive industry New machining solutions for that extra productivity and cost-effectiveness MAPAL technology: Tap the potential savings during the machining
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
POWER GENERATION INDUSTRY
Industrial Solutions of KORLOY POWER GENERATION INDUSTRY We Create your Tomorrow! We learn the challenge with nature. We also dream love in nature. Challenge for dream, Love for human It s an ideal of
Within the product group Rapid-Line, Jongen Werkzeugtechnik GmbH produces special milling tools and inserts as well as special solid-carbide cutters.
Jongen Rapid-Line Special Tools Within the product group Rapid-Line, Jongen Werkzeugtechnik GmbH produces special milling tools and inserts as well as special solid-carbide cutters. Jongen s engineering
Industrial Solutions of KORLOY AUTOMOTIVE INDUSTRY. We Create your Tomorrow! is-em-1-01
Industrial Solutions of KORLOY AUTOMOTIVE INDUSTRY We Create your Tomorrow! 20100830 is-em-1-01 Steering Wheel Aluminum MGEHR 1 [ Wheel OD ] : Turning-OD roughing, finishing We learn
EFFECT OF MANUFACTURING PROCESSES ON DESIGN 201
EFFECT OF MANUFACTURNG PROCESSES ON DESGN 201 n a 6. Features at an angle to the main machining direction should be avoided as they may require special attachments or tooling, Fig. 7.9. 7. Flat-bottom
Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
SPK Cutting Tool. BFL MILLING SYSTEM Plunge Milling, Helical Milling and Helical Interpolation
SPK Cutting Tool VEHICLES AEROSPACE GEAR + BEARING ENGINEERING WIND ENERGY BFL MILLING SYSTEM Plunge Milling, Helical Milling and Helical Interpolation AEROSPACE The aerospace industry places extremely
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
Spotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
Tooling concepts Gear milling.
Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing
on site machining and grinding
We offer custom solutions to all kind of Our Technical Design Office will find the optimal solution to your problem We carry out dimensional reports of all works we do, and ever warrant the quality that
COFA. Consistent deburring through holes on Even & Uneven surfaces in any material HEULE. Case Study - Automotive. Study Details
Case Study - Automotive COFA Consistent deburring through holes on Even & Uneven surfaces in any material BEFORE AFTER COFA Tool ION 1,400 parts / day (2 holes per part) CNC Machining Center Low Carbon
SPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
Computer Numeric Control
Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct
HMZ Locknuts simple and reliable locking devices
simple and reliable locking devices Technical Product Information A Member of the Schaeffler Group Application Characteristics Application The new HMZ locknuts are easy to handle, permitting accurate and
18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
Shay Truck Machining I - RH Journal Box
Shay Truck Machining I - RH Journal Box Nelson Riedel Nelson@NelsonsLocomoitive.com Initial: 2/28/03 Last Revised: 06/05/2004 I mentioned elsewhere that my limited machining skills are self taught. This
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR SHAFTS - NORMAL TYPE - ➁ 4 4 6 8 9 10 s 0,4 0,4 0,6 0, 0,8 0,8 1 1 ring d 2,, 4,,6 6,,4 8,4 9, d4 8,6 10, 11, 1, 14, 16 1 d2 2,8,8 4,8, 6,,6 8,6 9,6 groove m (H1) 0, 0, 0, 0,8 0,9 0,9
Steel and Industrial Machines. Construction Equipment. Power Generators. Aerospace. Automotive
Sumitomo Electric's Innovative Tools That Support Your Daily Life Sumitomo Electric promises to understand the needs of our customers and express outstanding creativity to provide excellent products and
Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE
Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE Price List 2017 Maximum economic efficiency thanks to refurbishing to original quality Even the most resilient tool will wear at some time when
Lower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
w w w. i s c a r. c o m
www.iscar.com Railway Industry The railway industry has played an important role in the past two decades becoming one of the leading means of transportation for freight and passengers. Ongoing investments
11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate
s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting
The new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
Powerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner powerful for the Energy technology Taps for ISO metric threads, M16 - M39 SW d2 l 1 l 2 d 1 d k Guhring no. 778 Standard DIN 2184-1
Powerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner Industrial sectors such as transmission, turbine and energy plant manufacturers require exceptionally large threads. For exactly such
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
ANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE
Speciation cum Compliance Certificate for Floor Type CNC H.B.M: Indent No. CG7A0109 ANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE SNO Tool Description Qty Remarks 1 Stub
Copyright
, Engineers Edge 2006-2011 Design for Milling Machining Training Written by Kelly L. Bramble Engineers Edge 2006, 2007, 2008, 2009, 2010, 2011 7.1 , Engineers Edge 2006-2011 Edited by: Kelly Bramble (Engineers
Spotlight.
Spotlight www.vargus.com Professional Threading Solutions Expanded Line of Thread Turning Solutions for the Oil and Gas Industry Solutions for Rotary Drill Stem Connections Unique insert design with strengthened
Machinist NOA (2010) Subtask to Unit Comparison
Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe
Walter boring and precision-boring tools: Systematically towards success.
_ EXPERTISE IN MACHINING Walter boring and precision-boring tools: Systematically towards success. Tool solutions Boring and precision-boring Walter Boring with Walter Capto. The new Walter universal geometries
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
[ means: Two in one. EMCOMAT E-300 E-360 E-400 E-480. Cycle-controlled lathes with high-powered cutting performance and maximum precision
[ E[M]CONOMY] means: Two in one. EMCOMAT E-300 E-360 E-400 E-480 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens drive system - Camlock
MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1
MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round
Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.
» CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for
MODEL T27451/T " & 20" SPIRAL CUTTERHEAD INSTRUCTIONS
MODEL T27451/T27452 15" & 20" SPIRAL CUTTERHEAD INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The T27451 15" & T27452 20" indexable
WESCON DSI DESIGNED SOLUTIONS INCORPORATED
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / FAX 949.916.0236 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over thirty-five
IKEGAI MACHINE TOOLS FOR CUSTOMIZED USE
THE ART OF TECHNOLOGY IKEGAI MACHINE TOOLS FOR CUSTOMIZED USE 1 CONTENTS Please click slide title. CM0J110616HP 2 USER + IKEGAI = SPECIALIZED MACHINES IKEGAI as specialized machine player in the manufacturing
4 + 5!" ENGINE BLOCK CRANKSHAFT CAMSHAFT KNUCKLE CONROD BEARING CAP 16+17!
4 + 5!" 6 + 7 8 + 9 10+11 12+13 14+15 16+17! 18+19 20+21! 22+23!" 24+25! 26+27 INGERSOLL!"#$%&' 4 + 5 ENGINE BLOCK 6 + 7 CRANKSHAFT 8 + 9 CAMSHAFT 10+11 KNUCKLE 12+13 CONROD 14+15 BEARING CAP 16+17 EXHAUST
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
Machine Tools MILLING PROCESS. BY LAKSHMIPATHI YERRA Asst.professor Dept.of Mechanical Engg.
Machine Tools MILLING PROCESS BY LAKSHMIPATHI YERRA Asst.professor Dept.of Mechanical Engg. FIG. 1 Typical parts and shapes produced by various cutting processes Fig. 2 Schematic illustration of milling
DRIVE COMPONENTS REMOVAL. 9. FXCW/C: see Figure Remove bolt (9), sprocket retainer (8), and thrust washer (7). NOTE PRIMARY DRIVE LOCKING TOOL
DRIVE COMPONENTS REMOVAL PART NUMBER HD-7977 TOOL NAME PRIMARY DRIVE LOCKING TOOL S To remove the primary chain, remove compensating sprocket, clutch assembly and primary chain as an assembly:. Remove
Gear milling solutions handbook
Gear milling solutions handbook Table of content Milling gears with Sandvik Coromant...3 Engineered solutions...4 Machining methods...5 Global support... 6 7 Solution overview...8 9 InvoMilling : Cutting
CNC Cooltool - Milling Machine
CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules
Drilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
The economical and versatile answer to Primary & Secondary Precision Machining and Assembly.
Vertomat Rotary Transfer Machines The economical and versatile answer to Primary & Secondary Precision Machining and Assembly. For Machine Sales, Spare Parts Sales, Component Feasibility/Machine Capability,
10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET TOOLS 31 SPECIAL APPLICATIONS 35 HOW TO REQUEST A QUOTATION
ZX Systems TM FACING, & CONTOURING ZXBORING, SYSTEMS contents 2 OVERVIEW OF ZX BORING, FACING, AND CONTOURING SYSTEMS 10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET
Focusing on the future of metal cutting.
_PRODUCT HIGHLIGHTS Focusing on the future of metal cutting. Product highlights Edition 2017-1 Turning, drilling, threading, milling Tiger tec Gold Go for better, go for Gold. For those who won t settle
Machine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
Design of Fixture for Cross Hole Drilling of Flange-Yoke
OPEN ACCESS International Journal Of Modern Engineering Research (IJMER) Design of Fixture for Cross Hole Drilling of Flange-Yoke Tushar D. Patil 1, Aditya V. Kavdikar 2, Anish T. Nadar 3, Gitesh M. Shirsat
MINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
TOOLING EXAMPLES. Industrial Tooling Example Tooling Example For Auto Industry
TOOLING EXAMPLES TOOLING EXAMPLES Industrial Tooling Example Tooling Example For Auto Industry C O N T E N T S 02 04 07 08 10 12 13 14 18 Gear Machining Solution Ship Building Industrial Solution Role
NEED HDD TOOLS, PARTS & ACCESSORIES?
NEED HDD TOOLS, PARTS & ACCESSORIES? Visit us on-line at straightlinehdd.com STRAIGHTLINE Produce Profitable Solutions In All Ground Conditions. THE RIGHT REAMER AVAILABLE FOR EVERY DRILL. StraightLine
Operating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
Machinist NOA (1998) Subtask to Unit Comparison
Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes
Seco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
Solid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
Disassembly Instructions - 1 hp. Planetary Reduction Gears
Disassembly Instructions - 1 hp. Planetary Reduction Gears Important: Use these instructions along with the tool parts page or manual. Notice: To avoid damage to the motor housing, use the Special Repair
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY JETSTREAM TOOLING WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many
Semi-concealed dovetail joints
No. 100 Semi-concealed dovetail joints A Description The semi-concealed dovetail joint is a classic solid wood corner joint. It is suitable for joining wider slats, boards and solid wood panels. Semi-concealed
Design for machining
Design for machining Machining processes are material removal processes which are a family of shaping operation in which excess or undesired material is removed from the work piece finally remaining with
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Separation Connector. Prototyping Progress Update March 1, 2013
Separation Connector By Koll Christianson, Luis Herrera, and Zheng Lian Team 19 Prototyping Progress Update March 1, 2013 Submitted towards partial fulfillment of the requirements for Mechanical Engineering
X3-Solutions for mobility
X3-s for mobility X3-s for mobility 3-SOLUTIONS FOR MOBILITY The mobility of people and goods is the deciding factor for life worldwide and is the motor for global economy. One of the greatest challenges
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
Dörries CONTUMAT VCE, VC, VC-V Vertical turning lathes Vertical turning centres
Engineering precisely what you value Dörries Dörries CONTUMAT VCE, VC, VC-V Vertical turning lathes Vertical turning centres 02 All of a piece From a modular design concept Dörries CONTUMAT vertical turning
2. Special tools. swiss made
2. Special tools 13 14 2. Special tools SPECIAL 701S tools page 17 Turning tool with profiled insert page 30 Special T-slot cutters and end mills page 25 Offset whirl thread cutters page 31 Step drills
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many of which are featured
FINISH MACHINING OF TURBINE CASINGS, BLADES & PARTING PLANE FASTENERS FOR OEM & SPARE PARTS. Star Wire (India) Engineering Limited, Sec-58,Faridabad
FINISH MACHINING OF TURBINE CASINGS, BLADES & PARTING PLANE FASTENERS FOR OEM & SPARE PARTS Star Wire (India) Engineering Limited, Sec-58,Faridabad Castings Blade Flats Forged & Rolled Steels ESR Grade
Mechanical Drawing. Fig 5-1
College of Engineering 1 Mechanical Drawing Mechanical Engineering Department Mechanical Drawing Lecture 5 Keys and keyways 5-1 Introduction A key, Fig. 5.1, is usually made from steel and is inserted
World leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
Silent Tools TM Productivity with slender tools
Silent Tools TM Productivity with slender tools Reducing vibration in focus Vibration-prone operations pose a constant threat to productive and secure machining, especially when dealing with long overhangs
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
Jig and Fixture Design. Chapter 1: Types and Functions of Jigs and Fixtures
Jig and Fixture Design Chapter 1: Types and Functions of Jigs and Fixtures Purpose of Tool Design Objectives: Provide simple, easy-to-operate tools for maximum efficiency Reduce manufacturing expenses
Student, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
Colonial Tool Group Divisions
Colonial Tool Group Divisions Colonial Tool Group Inc. HQ & Broach Division 1691 Walker Road, Windsor Ontario Building Size: 45,000 SF (1942) Advanced Cutting Tool Systems 4811 Malden Road, Windsor Ontario
Models 14CFS91-38NL 14CFS93-38NL 14CSL CNL92-51
Grinders and Burs Drills 300/440/660W Models 14CFS91-38NL 14CFS93-38NL 14CSL97-51 14CNL91-51 14CNL92-51 = ready for oilless use Series Model-no. Free Power Air Noise Air Recommended Standard accessories
Chapter 23: Machining Processes: Turning and Hole Making
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations
NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve
NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve Restricted Siemens AG 2017 Realize innovation. NX for manufacturing Key capabilities overview Mold and die machining
UNIVERSAL CENTRE LATHES
UNIVERSAL CENTRE LATHES TRADITION AND EXPERIENCE SR 6000 SR 2000 ŠKODA machine tools of different type and variant have been present in the world market for over 100 years. Among them were a lot of special
Operating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
MAKING PARTICULAR METAL OBJECTS BY ROLLING, e.g. SCREWS, WHEELS, RINGS, BARRELS, BALLS (essentially from sheet metal B21D)
B21H MAKING PARTICULAR METAL OBJECTS BY ROLLING, e.g. SCREWS, WHEELS, RINGS, BARRELS, BALLS (essentially from sheet metal B21D) Methods and devices for forming metal objects by rolling operations which
CoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
PCBN ball race milling cutters GUHRING - YOUR WORLD-WIDE PARTNER
The tooling concept of Guhring s ball race milling cutter is simple, practice orientated and highly accurate maximum rigidity and stability highest precision high process reliabiliy consistently high manufacturing
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF