General Repairs (497) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

Transcription

1 General Repairs Allgemeine General Repairs Werkzeuge Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (497) 10-01

2 KL Flexible Magnetic Lifter (retractable) KL PM Magnetic Lifter with flexible Shaft The lifting magnet is located within an anti-magnetic sleeve. This allows the tool to be positioned accurately before the magnet comes into operation. The magnet is triggered by pressing the handle which slides back the protective antimagnetic sleeve. Magnet power: Magnetic head -Ø: 400 g 7 mm 560 mm 80 g KL Flexible Magnetic Lifter (aluminium) KL With flexible shaft, which will remain in any desired bended position. Magnet power: Magnetic head -Ø: 600 g 8 mm 540 mm 30 g KL Flexible Magnetic Lifter KL This flexible magnetic lifter enables metallic objects to be removed even from hard-to-reach areas. Magnet power: Magnetic head -Ø: 600 g 8 mm 470 mm 70 g KL Flexible Magnetic Lifter (strong magnet power) KL This flexible magnetic lifter enables metallic objects to be removed even from hard-to-reach areas. The flexible shaft will remain in any desired bended position. Magnet power: Magnetic head -Ø: 2,000 g 15 mm 480 mm 140 g KL Telescopic Magnetic Lifter with Scriber KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. The KL magnetic lifter is ideal for lifting valve collets. Magnetic head -Ø: Magnet power: 7.5 mm 300 g mm 28 g KL Telescopic Magnetic Lifter (extra strong magnet power) KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. Magnetic head -Ø: Magnet power: mm 11 mm 1,600 g 33 g (498) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

3 General Repairs Telescopic Magnetic Lifter (magnet power 3.6 kg) KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. KL Magnetic head -Ø: Magnet power: mm 15 mm 3,600 g 61 g Claw Pickup Tool KL Used for gripping and removing small parts like nuts, bolts, washers, etc. from areas that are hard to reach. KL mm Flexible Lamp KL This flexible lamp allows even areas that are hard to reach to be illuminated. The flexible shaft, on the end of which is the lamp with a detachable magnetic head, remains in any desired bended position. Two 1.5 volt Mignon-Batteries are additionally required.(not included in the scope of delivery). KL Total length: Weight (without batteries): 430 mm 120 g Accessories: KL Spare bulbs set (5 bulbs, 1 magnetic head) Telescopic Mirror KL Allows hard-to-reach places to be easily seen. Any orientation possible (360 rotatable) KL / 720 mm Telescopic Mirror Ø 50 mm, 300 mm long KL Allows hard-to-reach places to be easily seen. Any orientation possible (rotatable) KL / 300 mm Telescopic Mirror Ø 32 mm, 485 mm long KL Allows hard-to-reach places to be easily seen. Any orientation possible (rotatable) KL / 485 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (499) 10-03

4 KL Magnetic Valve Collet Lifter (flexible) KL With this flexible mini magnetic lifter, metallic objects can be removed from the smallest crack. Magnetic lifter KL is particularly suitable for lifting/removing valve collets. Magnet-Ø 3 mm power: Magnet-Ø 4 mm power: 200 mm 6 g 150 g 270 g KL Magnetizing and Demagnetizing Block KL Used to magnetize and demagnetize tools such as screwdrivers, blades and other small parts made of iron. KL Set of Tweezers KL piece tweezer set - universal application. Description Length Qty. Extra slim, fine tips 125 mm 1 Extra fine tips 115 mm 1 Extra long, rounded tips, self-locking 170 mm 1 Fine tips; 40 angled 145 mm 1 Fine tips; self-locking 120 mm 1 Special tips for instrument bulbs 115 mm 1 KL Set of Hooks KL Designed to ease the removal of "O" rings, cotter pins, seals and bushes in various automotive applications. Blades stainless steel hardened and tempered with impact resistant handles. Hooks can also be used for bodywork interior lining. KL Pry Bar Set KL These pry bars made of special steel are ideal for: Dismantling stubborn components. Positioning components. Holding components in position. Spreading clamp-fixtures, etc. KL Pry Bar Set Part No. Length Blade width KL " (610 mm) 20 mm KL " (460 mm) 20 mm KL " (310 mm) 16 mm KL " (200 mm) 10 mm (500) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

5 General Repairs Pry Bar KL This pry bar made of special steel is ideal for: Dismantling stubborn components. Positioning and holding components in position. Spreading clamp-fixtures, etc. KL Blade width: 900 mm 24 mm Pry Bar Set KL Made of special steel, intended for: dismantling stubborn components. positioning components. holding components in position. checking suspension ball joints and silentblocs. KL Length Blade width 1 / 2 Weight 730 mm 24 / 33 mm 1,600 g 900 mm 24 / 33 mm 1,900 g Pry Bar KL With chrome-plated blade. Due to its special profile, ideal for bodywork and inner door trim. KL Blade width: 275 mm 26 mm Magnetic Tray 240 x 140 mm KL Stainless Steel Tray with extra strong rubber-protected magnetic feet. KL Size: 240 x 140 mm Combi-Shears KL High-performance blades of stainless steel for perfect cuts along the whole length of the blade. One serrated blade for cable-cutting. Convenient impact-resistant plastic handles with sprung self-opening action. KL Blade Overall 40 mm 180 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (501) 10-05

6 KL Stud Tool 3/8" (Universal) KL Universal tool, infinitely adjustable. Designed to screw in and unscrew studs with diameter 6-12 mm. Advantages: Infinitely adjustable. Suitable for use in very limited space conditions. Also suitable for screws with rusted or stripped threads Also suitable for screws with undersize. Drive: 3/8" Clamping range: 6-12 mm 450 g KL Stud Extracting and Inserting Tool Set KL For removal and replacement of threaded studs (setscrews). Right- or left-hand thread. Outer drive: 21 mm Inner drive: 1/2" 1.15 kg KL Stud Extracting and Inserting Tool Set KL Stud extracting and inserting tool for Ø 6 mm 1 KL Stud extracting and inserting tool for Ø 7 mm 1 KL Stud extracting and inserting tool for Ø 8 mm 1 KL Stud extracting and inserting tool for Ø 10 mm 1 KL Stud extracting and inserting tool for Ø 12 mm 1 KL Plastic storage case 1 KL K Screw Extractor Set (Turbo Sockets) KL K Used for extracting screws, nuts, and bolts when locating threads or hexagons are damaged. The special design of the sockets (tapered, left-handed twist) allows screws, nuts and bolts to be loosened and removed without any trouble. Drive: 3/8" Accessories (on demand): 1993 U-20 CODE: Reversible ratchet 3093 U-20 CODE: Reversible ratchet 3/8 200 mm KL K Screw Extractor Set (Turbo Sockets) Description Qty. Screw extractor, 6.3 mm (1/4") 1 Screw extractor, 8 mm (5/16") 1 Screw extractor, 9.5 mm (3/8") 1 Screw extractor, 11 mm (7/16") 1 Screw extractor, 12.5 mm (1/2") 1 Screw extractor, 14 mm (9/16") 1 Screw extractor, 16 mm (5/8") 1 Screw extractor, 19 mm (3/4") 1 Screw extractor, 10 mm 1 Screw extractor, 12 mm 1 Screw extractor, 13 mm 1 Screw extractor, 17 mm 1 Screw extractor, 17.5 mm (11/16") 1 Mandrel 1 Plastic storage case (502) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

7 General Repairs Screw Drill-Out Tool Kit (with HSCO drills) KL K This kit is intended for removing broken screws and thread bolts with thread M5 - M16. KL K Procedure: 1. Open the broken bolt (or screw) by drilling (use drill bush if necessary). 2. Drive in the pin. 3. Place the nut on the pin and extract bolt by means of a screw-wrench. KL K Screw Drill-Out Tool Kit ( with HSCO drills) Description Qty. HSCO drill Ø 3.2 mm (1/8") 1 Drill-out pin 1/8" (1 piece) 1 Removal nut 1/8" 1 HSCO drill, Ø 4.8 mm (3/16") 1 Drill-out pin 3/16" (1 piece) 1 Removal nut 3/16" 1 HSCO drill Ø 6.4 mm (1/4") 1 Drill-out pin 1/4" (1 piece) 1 Removal nut 1/4" 1 HSCO drill Ø 8.0 mm (5/16") 1 Drill-out pin 5/16" (1 piece) 1 Removal nut 5/16" 1 HSCO drill Ø 8.8 mm (11/32") 1 Drill-out pin 11/32" (1 piece) 1 Removal nut 11/32" 1 Drill bush 1/8" Ø 4.8 / 6.8 mm 1 Drill bush 1/8" Ø 4.8 / 7.5 mm 1 Drill bush 1/8" Ø 4.8 / 8.5 mm 1 Drill bush 1/8" Ø 4.8 / 9.0 mm 1 Drill bush 3/16" Ø 7.3 / 10.0 mm 1 Drill bush 3/16" Ø 7.3 / 10.8 mm 1 Drill bush 3/16" Ø 7.3 / 11.5 mm 1 Drill bush 3/16" Ø 7.3 / 12.5 mm 1 Drill bush 1/4" Ø 9.5 / 13 mm 1 Drill bush 1/4" Ø 9.5 / 14 mm 1 Plastic storage case 1 Sets of Drill-Out Pins KL Set of Drill-Out Pins 1/8" (5 units) KL KL Drill-Ø: 3.2 mm Set of Drill-Out Pins 3/16" (5 units) KL Drill-Ø: 4.8 mm Set of Drill-Out Pins 1/4" (5 units) KL Drill-Ø: 6.4 mm Set of Drill-Out Pins 5/16" (5 units) KL Drill-Ø: 8.0 mm Set of Drill-Out Pins 11/32" (5 units) KL Drill-Ø: 8.0 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (503) 10-07

8 KL K Thread Repair Kit for Drive Shafts KL K Universally suitable for M16x1.5, M18x1.5, M20x1.5, M22x1.5, M24x1.5, M27x1.5, M30x1.5. Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for Drive Shafts KL Base tool R36 1 KL Counter bearing M16x1.5 1 KL Counter bearing M18x1.5 1 KL Counter bearing M20x1.5 1 KL Counter bearing M22x1.5 1 KL Counter bearing M24x1.5 1 KL Counter bearing M27x1.5 1 KL Counter bearing M30x1.5 1 KL Thread roller P=1.5 1 KL Plastic storage case 1 KL K Thread Repair Kit for Wheel Studs KL K Universally suitable for M12x1.25, M12x1.5, M14x1.5 Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for Wheel Studs KL Thread roller P= KL Thread roller P=1.5 1 KL Counter bearing M12x KL Counter bearing M12x1.5 1 KL Counter bearing M14x1.5 1 KL Counter bearing R16 1 KL Plastic storage case 1 KL K Thread Repair Kit for External Threads KL K Universally suitable for M5, M6, M8, M10, M12 Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for External Threads KL Thread roller P= KL Thread roller P=1.5 1 KL Thread roller P= KL Thread roller P=1 1 KL Thread roller P=0.8 1 KL Counter bearing M12 1 KL Counter bearing M10 1 KL Counter bearing M8 1 KL Counter bearing M6 1 KL Counter bearing M5 1 KL Base tool R16 1 KL Plastic storage case (504) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

9 General Repairs Thread Repair Upgrade Kit KL Universally suitable for M14 and M16 This kit upgrades our thread repair kit KL K. KL KL Thread Repair Upgrade Kit KL Thread roller P=2 1 KL Counter bearing M16 1 KL Counter bearing M14 1 Frame Micrometer, 0-25 mm KL Features a clamp ring and ratchet stop. The adjustable concealed spindle is hardened and ground. Comes with heat-insulating pads. Measuring range of from 0 to 25 mm; surfaces chrome-plated. KL Measuring Range: Graduation: 0-25 mm 0.5 mm 350 g Frame Micrometer mm KL Features a clamp ring and ratchet stop. The adjustable concealed spindle is hardened and ground. Comes with heat-insulating pads. Measuring range of from 25 to 50 mm; surfaces chrome-plated. KL Measuring range: Graduation: mm 0.5 mm 500 g Dial Gauge Ø 58 mm KL Spindle and clamping shank made of stainless steel, design and measurement accuracy according to DIN 878-A. KL Reading: 0.01 mm Measuring Range: 10 mm Housing -Ø: 58 mm 1 pointer revolution: 1 mm Clamping shank-ø: 8 mm Dial Gauge Ø 40 mm KL Description: Spindle and clamping shank made of stainless steel, design and measurement accuracy according to DIN 878-E. The dial gauge is additionally equipped with a 10 mm extension (KL ). KL Reading: 0.01 mm Measuring Range: 5 mm Housing -Ø: 40 mm 1 pointer revolution: 0.5 mm Clamping shank Ø: 8 h 6 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (505) 10-09

10 KL Extension Set KL For dial gauge KL and KL The set consist of extensions KL to KL Each extension with Ø 4 mm. Part No. Length Part No. Length KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL Messuring Tip (flat) KL For dial gauge KL and KL and extensions KL to KL KL Precision Bore Measuring Tool KL Precision bore measuring tool for measuring cylindrical bores, especially suitable for petrol and diesel engines. Comes with dial gauge and wooden case. Measuring range: Measuring depth: Ø mm 180 mm KL Dial Gauge Stand with Dial Gauge KL Designed to measure the wobble of brake discs. Can also be used for fine-tuning when repairing engines and transmissions. Features: Strong rods of bright steel, fine adjustment for the dial gauge clamp, prismatic magnetic base which can be switched off. KL Support Stand with Dial Gauge KL Dial gauge Ø 58 mm 1 KL Support stand without dial gauge 1 KL Digital Calliper KL Open slide, hardened, with cross points and depth gauge. Made of stainless steel. Measuring range: Jaw: Reading: 155 mm 40 mm 0.01 mm 200 g (506) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

11 General Repairs Vernier Calliper for Brake Drums KL Measuring surfaces made of hardened stainless steel, scale and slide manufactured from aluminum profile. Open slide, fixing screw, vernier parallaxfree reading. KL Measuring range: Jaw: Vernier: 500 mm 250 mm 1/20 mm 1,200 g Vernier Calliper for Brake Disc KL Designed to measure the thickness of installed brake discs. The tool is hardened and features a locking screw. Made of matte chrome-plated stainless-steel. KL Measuring Range: Jaw: Vernier: 50 mm 75 mm 1/10 mm 110 g Vernier Calliper for HGV Brake Discs KL Designed to measure the thickness of installed brake discs. The tool is hardened and features a locking screw. Made of matte chrome-plated stainless-steel. KL Mesuring range: Jaw: Vernier: 100 mm 120 mm 1/10 mm 240 g Tire Tread Depth Gauge (Brass Design) KL Sturdy brass design. KL Weigth: Measuring range: Legibility accuracy: 50 g 30 mm 0.1 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (507) 10-11

12 KL Feeler Gauge (20 Blades) KL Range: mm in 0.05 mm increments. Blade-Length Weight 100 mm 100 g KL Precision Straightedge 500 mm KL Suitable for fitting cylinder heads up to 4 cylinders. Edges hardened, ground, lapped, with heat-insulated handle. Quality Description: Cross section: 500 mm Stainless steel 40 x 7 mm 960 g Accessory: KL Wooden case for precision straightedge KL Precision Straightedge 600 mm KL Suitable for fitting Cylinder Heads up to 6 Cylinders. Edges hardened, ground, lapped, with heat-insulated handle. Quality Description: Cross section: 600 mm Stainless steel 40 x 7 mm 1,200 g Accessory: KL Wooden case for Precision straightedge KL Wooden Storage Case for Precision Straightedge KL For storing the precision straight edge KL or KL mm 400 g KL Circlip Pliers Ø mm KL Due to the 45 angled tips, this tool is ideal for inside circlips. Required for gearbox and wheel bearing repairs. Tip-Ø: 2.5 mm 220 mm 220 g (508) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

13 General Repairs Circlip Pliers Ø mm KL The specially designed tips of the pliers (angled at 45 ) allow the trouble- free removal and installation of inner circlips when performing gearbox or wheel bearing repairs. KL Tip-Ø: 3 mm 310 mm 410 g Circlip Pliers Set KL K 10-piece Set, consisting of 8 Pliers and 2 Hooks, Pliers reversible for inner or outer Circlips with captive screw. Pliers reversible for inner or outer Circlips Pliers straight and angled Pliers with easy-grip handles Pliers of heat-treated spring-steel - light and handy Hooks straight and angled KL K E For Inner Circlips Tip Form Tip Ø[mm] for Shaft Ø or Bore Ø [mm] Length [mm] Weight [g] straight / angled / straight angled straight / angled / straight / angled / E E Unscrewed For Outer Circlips Pliers for Special Safety Rings KL Suitable for large rings found on drive shafts in earth-movers, construction vehicles and agricultural vehicles. KL Tip form: Tip size [mm]: 330 mm Inter-changeable, hook-shaped, wide, milled 3.5 x 8 spreading 8-75 mm 490 g Pliers for Special Safety Rings KL Suitable for large rings on drive shafts and articulated axles, e.g. Opel/ Vauxhall, VW-Audi. KL Tip-Form: Tip size [mm]: 210 mm straight, pointed, short, milled 1.6 x 3.3 spreading mm 190 g Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (509) 10-13

14 KL Circlip Pliers KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of application: Deep-seated, large clips on gear shafts and articulated axles. Ideal for drive shafts/cv-joints, engines and gearboxes. Tip-Form: Min. opening : Max opening : 240 mm straight, centering spigot, long, slim 5 mm 40 mm 210 g KL Circlip Pliers KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of application: Large clips on gear shafts and articulated axles. Ideal for drive shafts/cv-joints, engines and gearboxes. Tip form: Min. opening: Max. opening: 225 mm straight with retaining profile 6.5 mm 35 mm 205 g KL Circlip Pliers (straight) KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, etc. Tips are angled to 90. The Pliers allow quick and easy removal and replacement of outer circlips during repairs to engines, gearboxes, differentials, steering system, etc. KL Circlip Pliers (angled) KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of Application: Specially designed for deep-seated, large clips on gear shafts and articulated axles that are hard to access. Ideal for drive shafts/cv-joints, engines and gearboxes. Tip form: Min. opening: Max. opening: 200 mm 30 angled centring spigot, long, slim 3 mm 35 mm 190 g E centre hole (510) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

15 General Repairs Circlip Pliers (angled 90 ) KL For brake calipers and gear boxes, angled 90. KL Leg length: 190 mm 60 mm Snipe Nose Pliers (long design) KL With extra long grip, straight tips for mounting position that are hard to access. KL mm Snipe Nose Pliers (long design) 45 KL With extra long grip, tips angled 45, for mounting position that are hard to access. KL mm Crowfoot Wrench Set KL The exceptionally compact and solid design of these open-ended wrenches enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. KL KL Crowfoot Wrench Set Part No. Size (waf) Length [L1] Height [H1] Width 1 [W1] Width 2 [W2] Opening [O1] Drive KL mm 49 mm 10 mm 35 mm 27 mm 13 mm 3/8" KL mm 49 mm 10 mm 35 mm 27 mm 14 mm 3/8" KL mm 49 mm 10 mm 36 mm 27 mm 15 mm 3/8" KL mm 57 mm 12 mm 40 mm 32 mm 17 mm 1/2" KL mm 60 mm 12 mm 43 mm 33 mm 19 mm 1/2" Accessories (on demand): 1993 U-20 CODE: Reversible ratchet 3093 U-20 CODE: Reversible ratchet 3/8 200 mm DMK 200 CODE: Torque Wrench Dremaster Nm CODE: Torque Wrench TORCOFIX K 3/ Nm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (511) 10-15

16 KL Crowfoot Wrench Set KL The exceptionally compact and solid design of these open-ended wrenches enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. KL Crowfoot Wrench Set Part No. Size (waf) Length [L1] Height [H1] Width 1 [W1] Width 2 [W2] Opening [O1] Drive KL mm 62 mm 12 mm 48 mm 34 mm 23 mm 1/2" KL mm 68 mm 12 mm 52 mm 37 mm 24 mm 1/2" KL mm 72 mm 13 mm 56 mm 39 mm 26 mm 1/2" KL Crowfoot Wrench Set KL The exceptionally compact and solid design of these open-ended wrenches enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. KL Crowfoot Wrench Set Part No. Size (waf) [O1] Length [L1] Height [H1] Width 1 [W1] Width 2 [W2] Weight Drive KL mm 12 mm 75 mm 29 mm 280 g 1/2" KL mm 13 mm 88 mm 30 mm 380 g 1/2" KL mm 13 mm 92 mm 32 mm 400 g 1/2" KL K Flexible Crowfoot Socket Wrench Set KL K Universally suitable for screwed connections, for example, on brake systems, injection systems etc. These tools are required for loosening and tightening screwed connections. Thanks to the special design of the wrenches, even screwed connections that are difficult to access can be reached quickly and without any trouble. Profile: Double Hex Drive: 3/8" KL K Flexible Crowfoot Socket Wrench Set KL Flexible crowfoot socket wrench, size (waf) 14 mm, bi-hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 16 mm bi-hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 17 mm bi-hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 18 mm bi-hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 19 mm bi-hex, 3/8" 1 KL Plastic storage case 1 Accessories (on demand): 1993 U-20 CODE: Reversible ratchet 3093 U-20 CODE: Reversible ratchet 3/8 200 mm (512) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

17 General Repairs Flexible Crowfoot Socket Wrench Set KL KA Universally suitable for screwed connections, for example, on brake systems, injection systems etc. KL KA This tool is required for loosening and tightening screwed connections. Thanks to the special design of the ring spanners, even screwed connections that are difficult to access can be reached quickly and without any trouble. Profile: Hex Drive: 3/8" KL KA Flexible Crowfoot Socket Wrench Set KL Flexible crowfoot socket wrench, size (waf) 11 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 12 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 14 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 16 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf)17 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 18 mm hex, 3/8" 1 KL Flexible crowfoot socket wrench, size (waf) 19 mm hex, 3/8" 1 KL Plastic storage case 1 Screwdriver Bit Set, 10 mm, Hex / Spline / Torx KL K Consists of: KL Bit-Holder, 10 mm hex; Drive 3/8" the carrier of the Inserts. KL Bit-Holder, 10 mm hex; Drive 1/2" the carrier of the Inserts. KL K Bit Inserts, Drive 10 mm hex; Length 30 mm Part No. Size (waf) Part No. Size (waf) KL KL M10 KL KL M12 KL KL T20 KL KL T25 KL KL T30 KL KL T40 KL KL T45 KL M5 KL T50 KL M6 KL T55 KL M8 KL T60 Bit Inserts, Drive 10 mm hex; Length 75 mm Part No. Size (waf) Part No. Size (waf) KL KL M10 KL KL M12 KL KL T20 KL KL T25 KL KL T30 KL KL T40 KL KL T45 KL M5 KL T50 KL M6 KL T55 KL M8 KL T60 KL (3/8 ) KL (1/2 ) KL (30 mm) KL (75 mm) KL (30 mm) KL (75 mm) KL Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA KL (30 mm) KL (75 mm) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (513) 10-17

18 KL K Torx Tool Set KL K Consists of: Magnetic Lifter with scriber - KL : Screwdrivers Part-No. Size Part-No. Size KL T8 x 80 mm KL T27 x 100 mm KL T10 x 100 mm KL T30 x 100 mm KL T15 x 100 mm KL T40 x 100 mm KL T20 x 100 mm KL T25 x 100 mm KL T25 x 100 mm Double Ring Spanners Part-No. Size Part-No. Size KL E6 / E8 KL E14 / E18 Sockets, Drive 1/2", Length 38 mm Part-No. Size Part-No. Size KL Torx E12 KL Torx E20 KL Torx E14 KL Torx E22 KL Torx E16 KL Torx E24 KL Torx E18 Bit-Holder, Size (waf)10mm - KL drive 1/2" Magnetic Lifter with scriber Screwdrivers Double Ring Spanners Bit-Holder (1/4 ) Bit-Holder (1/2 ) Bit-Inserts (Drive 1/4") Sockets (Drive 1/4 ) Bit-Inserts, Drive size (waf) 10 mm; Length 30 mm Part-No. Size Part-No. Size KL Torx T40 KL Torx T55 KL Torx T45 KL Torx T60 KL Torx T50 Bit-Inserts, Drive hex 10; Length 75 mm Part-No. Size Part-No. Size KL Torx T15 KL Torx T45 KL Torx T20 KL Torx T50 KL Torx T25 KL Torx T55 KL Torx T30 KL Torx T60 KL Torx T40 Sockets, Drive 1/4", Length 23 mm Part-No. Size Part-No. Size KL Torx E4 KL Torx E8 KL Torx E5 KL Torx E10 KL Torx E6 KL Torx E11 KL Torx E7 Socket Inserts, Drive 1/4", Length 38 mm Part-No. Size Part-No. Size KL Torx T7 KL Torx T20 KL Torx T8 KL Torx T25 KL Torx T9 KL Torx T27 KL Torx T10 KL Torx T30 KL Torx T15 Bit-Holder hex 1/4" KL Drive 1/4" Bit-Inserts (Drive 1/4 ) Torx Hexagon Socket Keys Head-Ø Weight Lift-capacity 7.5 mm; mm 28 g 400 g Bit-Inserts, Drive hex 1/4" Part-No. Size Part-No. Size KL Torx T7B KL Torx T20B KL Torx T8B KL Torx T25B KL Torx T9B KL Torx T27B KL Torx T10B KL Torx T30B KL Torx T15B KL Torx T40B Torx Hexagon Socket Keys Part-No. Size Part-No. Size KL Torx T8 KL Torx T55 KL Torx T10 KL Torx T27 KL Torx T15 KL Torx T30 KL Torx T20 KL Torx T40 KL Torx T25 KL Torx T45 KL Torx T50 KL Torx T60 KL Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA (514) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

19 General Repairs Torx Screwdriver Bit and Socket Set, in a Plastic Storage Case KL K Consists of: KL Bit-Holder, 1 waf 10 mm; Drive 3/8" carrier for the screwdriver bits. KL Bit-Holder, 1 waf 10 mm; Drive 1/2" carrier for the screwdriver bits. Screwdriver bits, Drive waf 10 mm; Length 30 mm Part No. Size Part No. Size KL T20 KL T45 KL T25 KL T50 KL T30 KL T55 KL T40 Screwdriver bits, Drive waf 10 mm; Length 75 mm Part No. Size Part No. Size KL Torx T20 KL Torx T45 KL Torx T25 KL Torx T50 KL Torx T30 KL Torx T55 KL Torx T40 Sockets, Drive 1/4", Length 23 mm Part No. Size Part No. Size KL Torx E4 KL Torx E7 KL Torx E5 KL Torx E8 KL Torx E6 Sockets, Drive 3/8", Length 23 mm Part No. Size Part No. Size KL Torx E10 KL Torx E12 KL Torx E11 KL Torx E14 Sockets, Drive 1/2", Length 40 mm Part No. Size Part No. Size KL Torx E16 KL Torx E22 KL Torx E18 KL Torx E24 KL Torx E20 KL K KL (3/8 ) KL (1/2 ) KL (30 mm) KL (75 mm) KL (23 mm) KL (23 mm) KL (40 mm) KL Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA Screwdriver Bit Set RIBE (Polydrive), in a Plastic Storage Case KL K Consists of: KL K Bit-Holder, carrier of the screwdriver Inserts,10 mm hex; Drive 1/2" square Bit-Holder, carrier of the screwdriver Inserts,10 mm hex; Drive 3/8" square Part No. Size Part No. Size KL M 4 KL M 4 KL M 5 KL M 5 KL M 6 KL M 6 KL M 7 KL M 7 KL M 8 KL M 8 KL M 9 KL M 9 KL M 10 KL M 10 KL M 12 KL M 12 KL M 13 KL M 13 KL M 14 KL M 14 Plastic storage case: 235x140x45 mm KL (3/8 ) KL (1/2 ) = reg. trademark of Richard Bergner GmbH & Co. KG Accessories (on demand): 1993 U-20 CODE: Reversible ratchet KL (30 mm) KL (75 mm) 3093 U-20 CODE: Reversible ratchet 3/8 200 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (515) 10-19

20 KL K Screwdriver Bit Set in a plastic storage case (62-piece set) KL K Consists of: Bit-Holder 1/4"; Drive 1/4" for retaining the screwdriver bits Screwdriver Bits: Phillips (PH) Size: 0; 1 (2 pcs.); 2 (3 pcs.); 3 Pozidriv (PZ) Size: 0; 1 (2 pcs.); 2 (2 pcs.); 3 Straight Size: 3; 4; 4.5; 5.5; 6,5 HexSize: 2; 2.5; 3; 4; 5; 6; 7; 8 5-Point Size: T-10; T-15; T-20; T-25; T-27; T-30; T-40; T-45; T-50 RIBE (Polydrive) Size: M4; M5; M6; M7 Torx Size: T-7; T-8; T-9; T-10; T-15; T-20; T-25; T-27; T-30; T-40 Torx Size: T-7; T-8; T-9; T-10; T-15; T-20; T-25; T-27; T-30; T-40 Torx Size: 5; 6; 8 Standard Bit, Spanner, Size: 6; 8; 10 Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA = reg. trademark of Richard Bergner GmbH & Co. KG KL Bit-Ratchet (angled 1/4" and 5/16" with retaining magnet) KL Reversible for left or right-hand rotation. With drives for 5/16 and 1/4" Bit inserts. Each Bit-drive has a knurled thumb-wheel for easy tightening of bolts before final tightening. The Bit-Inserts are retained in the drive by a built-in magnet. Especially useful for areas that are difficult to access. 120 g 132 mm Bit- Drive: 1/4" Bit- Drive: 5/16" KL Bit-Ratchet (straight 1/4" and 5/16" with retaining magnet) KL Reversible for left or right-hand rotation. With drives for 5/16 and 1/4" Bit Inserts. Each Bit-drive has a knurled thumb-wheel for easy tightening of bolts before final tightening. The Bit-Inserts are retained in the drive by a built-in magnet. Especially useful for areas that are difficult to access. 120 g 140 mm Bit- Drive: 1/4" Bit- Drive: 5/16" KL Flexible Bit Holder 1/4" with Flexible Extension KL Especially useful for areas that are difficult to access. Length Screw Driver: 375 mm Length Extension: 135 mm Bit- Drive: 1/4" 250 g (516) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

21 General Repairs Set of Screwdriver Bit Sockets (5-Point Star), 1/4" For example, suitable for: Mass air flow sensor VW-Audi, Mercedes. Mercedes outside mirror. Immobiliser control unit (EWS3) on Rover 75 and MG ZT. Pumps in pump-line-injection systems on Mercedes HGV (e.g. Atego, Actros). Door lock fastening screws on Ford Fusion KL K KL K 9 Screwdriver Bit Sockets supplied in a plastic storage case. For loosening and tightening 5-point star safety bolts with bore. Consists of: 9x Screwdriver Bit Sockets, Drive: hex 1/4" 1x Bit Holder (for retaining screwdriver bits) hex 1/4"; drive square 1/4" 1x Plastic storage case Size: 10, 15, 20, 25, 27, 30, 40, 45, 50 Drive (Bit-Insert): hex 1/4" Drive (Bit-Holder): 1/4" Length (Bit-Insert): 25 mm 100 g Set of Screwdriver Bit Sockets (5-Point Star), with Ratchet in a Storage Case KL K Suitable e.g. for: Plug-in pumps in pump-line-injection systems on Mercedes HGV (e.g. Atego, Actros) Mercedes outside mirror Mass Air Flow Sensor VW-Audi, Opel/Vauxhall etc. Immobiliser control unit (EWS3) on Rover 75 and MG ZT Door Lock Fastening Screws on Ford Fusion KL K For loosening and tightening 5-point star safety bolts with bore. Screwdriver Bit Inserts (9 pieces): Drive 1/4" hex; size 10, 15, 20, 25, 27, 30, 40, 45, 50 Bit Reversible Ratchet: hex 1/4"; fine toothed, left-/right reversible Plastic storage case Size: 10, 15, 20, 25, 27, 30, 40, 45, 50 Drive (Bit-insert): hex 1/4" Drive (Bit-holder): hex 1/4" Length (Bit-insert): 25 mm Length (ratchet): 94 mm Overall height (ratchet), incl. bit: 28 mm Overall weight: 140 g Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (517) 10-21

22 KL K Screwdriver Bit Socket Set, Drive 1/2", XZN, 26-piece set KL K KL K Screwdriver Bit Socket Set, Drive 1/2", XZN, 26 pcs. KL KL KL KL Screwdriver Bits, Drive 1/2", Length 55 mm Part No. Size Part No. Size KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 KL M16 Screwdriver Bits, Drive 1/2", Length 100 mm Part No. Size Part No. Size KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", Length 140 mm Part No. Size Part No. Size KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", Length 200 mm Part No. Size Part No. Size KL M8 KL M12 KL M10 KL M14 KL Screwdriver Bit Socket XZN-M12, 78 mm, drive 1/2" KL For loosening and tightening XZN M12 fastening screws. The ideal tool for the wheel bearing fastening screws found on VW Golf VI etc. Reinforced design, however, not suitable for use on impact wrenches. Size: XZN M12 Drive: 1/2" 78 mm KL Screwdriver Bit Socket XZN-M14, 78 mm, drive 1/2" KL Suitable for the clamping bolts that are found on shock absorber mountings at front axle steering knuckles on Audi A3 (8P); VW Passat (3C) and Golf V (1K); also for brake caliper mounting bolts on VW Touran and Passat (3C), Audi A3, Seat Altea, as well as for bolts on lower suspension ball joint connections on VW T4, T5. Designed to be used for loosening and tightening XZN M14 fastening bolts. Reinforced version; however, the socket is not suitable for use with an impact wrench. Size: XZN M14 Drive: 1/2" Lenght: 78 mm KL Screwdriver Bit Socket XZN-M18, 78 mm, drive 1/2" KL Suitable e.g. for Audi A3, VW Polo, Golf V etc. This tool is designed to loosen and tighten the rear axle wheel hub bearing unit fastening screw. Drive: 1/2" Size: XZN-M18 78 mm Accessories (on demand): 1993 U-20 CODE: Reversible ratchet (518) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

23 General Repairs Screwdriver Bit Socket Kit KL K Universal application. The ideal kit for VW-Audi, Seat, Skoda vehicles, e.g. Audi A3 (8P),VW Polo (6N), Golf IV (1J), Golf V (1K), Passat (3C), Touran (1T), T4; T5, Seat Altea (5P) etc. For loosening and tightening XZN fastening screws, for example those on brake calipers, wheel bearings, wheel-hub bearing units, suspension ball joints, drive shafts. Also suitable for shock absorber mount clamping screws on front axle steering knuckles etc. KL K KL K Screwdriver Bit Socket Kit KL Screwdriver bit socket XZN-M12, 78 mm, 1/2" 1 KL Screwdriver bit socket XZN-M14, 78 mm, 1/2" 1 KL Screwdriver bit socket XZN-M18, 78 mm, 1/2" 1 KL Flexible Multi-Tooth Socket XZN M10 1 KL Plastic storage case 1 Multi-Tooth Sockets KL The special socket enables the drive shaft fixing screws to be loosened from the differental flange quickly and easily from the outside. Not intended for use on impact wrenches. Advantages: Substantial time savings. KL Multi-Tooth Socket XZN M8, 800 mm KL Suitable for VW-Audi, etc. Size (waf): XZN M8 Drive: 1/2" 800 mm Special Socket XZN M10, 800 mm KL Suitable for VW Golf IV etc. Size (waf): XZN M10 Drive: 1/2" 800 mm Special Socket XZN M12, 800 mm KL Suitable for VW T4, Touareg etc. Size (waf): XZN M12 Drive: 1/2" 800 mm Special Socket XZN M14, 800 mm KL Suitable for VW T4, Touareg etc. Size (waf): XZN M mm Drive: 1/2" Multi-Spline Socket XZN M16 KL Suitable for Audi A3, A4, A6; VW Fox, Golf (IV), LT. This special socket features an inner bore and is therefore the ideal tool for oil drain plugs and oil control plugs on gearboxes. KL Drive: 1/2" Accessories (on demand): 1993 U-20 CODE: Reversible ratchet DMK 200 CODE: Torque Wrench Dremaster Nm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (519) 10-23

24 KL B Screwdriver Bit Socket Set RIBE (Polydrive), 1/2", 8-piece KL B Suitable for FIAT engines with RIBE (Polydrive) screws. For loosening and tightening RIBE (Polydrive) screws on cylinder head valve drive housings etc. Drive: 1/2" KL B Screwdriver Bit Socket Set RIBE (Polydrive), 1/2", 8-piece KL Screwdriver Bit Socket RIBE (Polydrive) M7, 55 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M8, 55 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M10, 140 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M12, 140 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M13, 140 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M14, 140 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M6, 200 mm, 1/2" 1 KL Screwdriver Bit Socket RIBE (Polydrive) M8, 200 mm, 1/2" 1 = registered trademark of Richard Bergner GmbH & Co. KG KL K Screwdriver Bit Socket Set RIBE (Polydrive), 1/2", 32-piece KL K KL K Screwdriver Bit Socket Set RIBE (Polydrive), 1/2", 32-piece KL KL KL KL Screwdriver Bit Sockets, Drive 1/2", Length 55 mm Part No. Size Part No. Size KL M5 KL M10 KL M6 KL M12 KL M7 KL M13 KL M8 KL M14 KL M9 Screwdriver Bit Sockets, Drive 1/2", Length 100 mm Part No. Size Part No. Size KL M5 KL M10 KL M6 KL M12 KL M7 KL M13 KL M8 KL M14 KL M9 Screwdriver Bit Sockets, Drive 1/2", Length 140 mm Part No. Size Part No. Size KL M8 KL M12 KL M9 KL M13 (FIAT) KL M10 (VW) KL M14 KL M10 (FIAT) Screwdriver Bit Sockets, Drive 1/2", Length 200 mm Part No. Size Part No. Size KL M8 KL M12 KL M9 KL M13 (FIAT) KL M10 (VW) KL M14 KL M10 (FIAT) = reg. trademark of Richard Bergner GmbH & Co. KG KL Screwdriver Bit Socket RIBE (Polydrive) M10 KL Ideal to remove and re-tighten cylinder-head retaining bolts on VW-Audi engines with RIBE similar (Polydrive) profile. Drive: 1/2" 140 mm 100 g (520) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

25 General Repairs Set of Screwdriver Bit Sockets, Torx, 1/2" These special sockets in a reinforced design come in a plastic storage case. They are used for axles and engines repairs. KL K Set of Screwdriver Bit Sockets, Torx, 1/2" Part No. Description Torx Size KL Screwdriver bit socket T30 KL Screwdriver bit socket T40 KL Screwdriver bit socket T45 KL Screwdriver bit socket T50 KL Screwdriver bit socket T55 KL Screwdriver bit socket T60 KL Screwdriver bit socket T70 = reg. trademark of Acument Intellectual Properties, LLC. USA KL K KL K Set of Screwdriver Bit Sockets (Torx ), Drive 1/2", 32-Piece Set KL K KL K Set of Screwdriver Bit Sockets (Torx ), Drive 1/2", 32-Piece Set KL K Screwdriver Bit Sockets, Drive 1/2", Length 55 mm Part No. Size Part No. Size KL T20 KL T45 KL T25 KL T50 KL T27 KL T55 KL T30 KL T60 KL T40 KL T70 Screwdriver Bit Sockets, Drive 1/2", Length 100 mm Part No. Size Part No. Size KL T20 KL T45 KL T25 KL T50 KL T27 KL T55 KL T30 KL T60 KL T40 KL T70 Screwdriver Bit Sockets, Drive 1/2", Length 140 mm Part No. Size Part No. Size KL T40 KL T55 KL T45 KL T60 KL T50 KL T70 Screwdriver Bit Sockets, Drive 1/2", Length 200 mm Part No. Size Part No. Size KL T40 KL T55 KL T45 KL T60 KL T50 KL T70 = reg. trademark of Acument Intellectual Properties, LLC. USA KL KL KL KL Accessories (on demand): 1993 U-20 CODE: Reversible ratchet DMK 200 CODE: Torque Wrench Dremaster Nm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (521) 10-25

26 KL Screwdriver Bit Socket Torx T80 KL Manufactured from Chrome Vanadium-Steel. Torx : T80 Drive: 1/2" L1: 100 mm L1: 140 mm 250 g = reg. trademark of Acument Intellectual Properties, LLC. USA KL Screwdriver Bit Socket Torx T90 KL Manufactured from Chrome Vanadium-Steel. Torx : T90 Drive: 1/2" L1: 100 mm L2: 140 mm 270 g = reg. trademark of Acument Intellectual Properties, LLC. USA KL Screwdriver Bit Socket Torx T100 KL Manufactured from Chrome Vanadium-Steel. Torx : T100 Drive: 1/2" L1: 100 mm L2: 140 mm 300 g = reg. trademark of Acument Intellectual Properties, LLC. USA KL K Set of Torx Screwdriver Bit Sockets KL K Set of Torx Sockets in extended length for tamper-proof bolts Torx with pilot. Socket Inserts, Drive: 1/2", 100 mm Part No. Size Part No. Size KL T30 KL T55 KL T40 KL T60 KL T45 KL T70 KL T50 = reg. trademark of Acument Intellectual Properties, LLC. USA 2093 U-3 T Ratchet with T-handle 1/4" - Code: U-3 T With two-wing plastic T-handle. Ergonomic shape enables fast and convenient working. With metal reversing disc and fine-toothed ratchet wheel, length 140 mm, drive 1/4" 3093 U-3 T Ratchet with T-handle 3/8" - Code: With two-wing plastic T-handle. Ergonomic shape enables fast and convenient working. With metal reversing disc and fine-toothed ratchet wheel, length 140 mm, drive 3/8" 676 Driving handle 1/4" - Code: Non-slip 2-component handle with recessed hexagon drive 1/4" (522) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

27 General Repairs Insert Bit Holder 1/4" hex - 3/8" square - Code: Drive: Drive: 50 mm 1/4" hex 3/8" square Insert Bit Holder 1/4" hex - 1/4" square - Code: ,3 Drive: Drive: 50 mm 1/4" hex 1/4" square 673 6,3 Socket Set Torx 1/4" KL A Chrome vanadium steel. KL KL Socket Set Torx 1/4" Sockets, Drive 1/4", Length 200 mm Part No. KL KL KL KL KL Size E5 E6 E7 E8 E10 = reg. Trademark of Acument Intellectual Properties, LLC. USA Set of Screwdriver Bit Sockets, Torx 3/8" KL Chrome vanadium steel. KL KL Set of Screwdriver Bit Sockets Torx 3/8" Screwdriver Bit Sockets, Drive 3/8", Length 200 mm Part No. KL KL KL KL KL KL KL KL KL KL Size T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 = reg. Trademark of Acument Intellectual Properties, LLC. USA Socket Set Torx 3/8" KL Chrome vanadium steel. KL KL Socket Set Torx 3/8" Sockets, Drive 3/8", Length 200 mm Part No. KL KL KL KL KL KL Size E6 E7 E8 E10 E11 E12 = reg. Trademark of Acument Intellectual Properties, LLC. USA Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (523) 10-27

28 KL Socket Set, Torx E10 / E12 / E14 / E18, long, 1/2" KL Suitable for BMW, Mercedes CDI engines, etc. These Torx Sockets in extended length with built-in magnet enable the loosening and tightening of cylinder head bolts with outer-torx profiles. KL Socket Set, Torx E10 / E12 / E14 / E18, long, 1/2" Part No. Torx Drive Length Weight KL E10 1/2" 150 mm 200 g KL E12 1/2" 150 mm 225 g KL E14 1/2" 150 mm 250 g KL E18 1/2" 150 mm 415 g = registered trademark of Acument Intellectual Properties, LLC. USA KL Socket Insert Set Ball head KL Extra-long design with ball head. Ideal for loosening and tightening internal hex socket screws that sit very deep or are hard to access e.g. on the oil pan, cylinder head, engine, drive, etc. Application examples: KL For oil sump bolts in VW T4 5-cylinder engines. KL Removal and installation of knock sensor on Audi V6 engines. Drive: 1/2" 288 mm KL Socket Insert Set Ball head KL Socket Insert, Ball Head, Size (waf) 5 1 KL Socket Insert, Ball Head, Size (waf) 6 1 KL Socket Insert, Ball Head, Size (waf) 8 1 KL Socket Insert, Ball Head, Size (waf) 10 1 KL K Screwdriver Bit Socket Set ( hex), 1/2", 30-piece KL K KL K Screwdriver Bit Socket Set (hex), 1/2", 30-piece KL KL KL KL Screwdriver Bit Sockets, Drive 1/2", Length 55 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 12 KL hex 6 KL hex 14 KL hex 7 KL hex 17 KL hex 8 KL hex 19 KL hex 10 Screwdriver Bit Sockets, Drive 1/2", Length 100 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 10 KL hex 6 KL hex 11 KL hex 7 KL hex 12 KL hex 8 KL hex 13 Screwdriver Bit Sockets, Drive 1/2", Length 140 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 10 KL hex 6 KL hex 12 KL hex 7 KL hex 14 KL hex 8 Screwdriver Bit Sockets, Drive 1/2", Length 200 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 8 KL hex 6 KL hex 10 KL hex 7 KL hex (524) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

29 General Repairs Extension (Length 600 mm) KL This tool is essential when performing work at the gearbox, engine and exhaust system. KL Drive: 1/2" to 3/8" 600 mm Breaker Bar 1/2", (Length 620 mm) KL Extra long version with 180 joint. Designed for extremely stubborn fastenings screws. KL Total lengh: 620 mm Drive: 1/2" Hinged Head KL Spare part for breaker bar KL KL Plastic storage case KL Universal plastic storage case with a foam insert. KL Dimensions: Outer: Inner: 275x230x83 mm (WxHxD) 261x175x77 mm (WxHxD) Plastic Storage Case KL Universal plastic storage case with a foam insert. Dimensions: Outer: Inner: 340x275x83 mm (WxHxD) 326x222x77 mm (WxHxD) Plastic storage case KL Universal plastic storage case with a foam insert. Dimensions: Outer: Inner: 450x360x106 mm (WxHxD) 437x295x100 mm (WxHxD) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (525) 10-29

30 KL Workshop Trolley/Workbench (without tools) KL The sturdy workshop trolley/workbench KL is designed to be used in conjunction with the stationary spring compressor KL-5501 as well as with the wheel bearing/silentbloc tools of the KL-0039-Series, thus providing you with a professional and mobile workplace for accurate and quick chassis or axle repairs. The large Mulitplex worktop made from solid beech offers the ideal work surface. The convenient push handle and the smooth-running castors (125 mm), two of them are steering castors with brakes, ensure the easy and mobile use of the trolley. The 4 drawers feature an individual locking mechanism as well as a central lock designed to prevent any unintentional opening of the drawers. Each drawer has a load capacity of up to 80 kg. Thanks to the full-extension slides, the drawers can be pulled out completely thus allowing for proper storage, full visibility and easy access to the tools. An ingenious 'one-drawer-at-a-time' interlock mechanism prevents the opening of all drawers at the same time and, as a result, the trolley from tilting/tipping -over. Dimensions: Worktop: Drawer (1x): Inner dimensions of drawer: Drawer (2x): Inner dimensions of drawer: Drawer (1x): Inner dimensions of drawer: Steering castor with brake (2x): Fixed castor (2x): W 1200 x H 900 x D 600 mm W 1200 x H 25 x D 600 mm W 1000 x H 100 mm W 1000 x H 95 x D 445 mm W 1000 x H 150 mm W 1000 x H 140 x D 445 mm W 1000 x H 200 mm W 1000 x H 190 x D 445 mm Ø 125 mm Ø 125 mm 125 kg KL Serie Foam inserts KL Serie The foam inserts of the KL Series are designed to keep your KLANN tools always properly organised and well protected. The modules can conveniently be stored in a workshop trolley such as the KL This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, as well as to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam inserts are provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. PM (526) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

31 General Repairs Spindle/Drive Tool Kit, in a Foam Insert The KL E spindle/drive tool kit is supplied in a tool control foam insert thus allowing for a clear and easy way of working with the wheel bearing and silentbloc tools of the KL Series. The drive parts included in this kit are used in conjunction with the tools of the KL Series for removing and installing bearings, bushings, joints etc. The tool control foam inserts of the KL Series are designed to keep the spindles and drive parts always properly organised and well protected. The modules can conveniently be stored in a workshop trolley such as the KL but also fit snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam inserts are provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL E Spindle/Drive Tool Kit, in a Foam Insert KL Spindle/Drive Tool Kit 1 KL Foam Insert 1 KL Spindle/Drive Tool Kit KL Retainer adaptor for clamping nut 1 KL Retainer adaptor for Hydraulic Cylinder 1 KL Retainer adaptor for pressure spindle 1 KL Retainer adaptor for mechanical spindle 2 KL Pull spindle M10x KL Shoulder nut M10x KL Pull spindle M12 1 KL Shoulder nut M12 2 KL Pull spindle M14 1 KL Shoulder nut M14 2 KL Pull spindle M16 1 KL Shoulder nut M16 2 KL Pull spindle M18 1 KL Shoulder nut M18 2 KL Pull spindle M20 1 KL Clamping nut 2 KL Pressure spindle M20 x 350 mm 1 KL Spindle 1 KL Slide hammer puller 1 Spindle/Drive Tool Kit, in a Foam Insert KL E KL E KL E KL E Spindle/Drive Tool Kit, in a Foam Insert KL Spindle/Drive Tool Kit 1 KL Foam Insert 1 KL E KL Spindle/Drive Tool Kit KL Retainer adaptor for clamping nut 1 KL Retainer adaptor for Hydraulic Cylinder 1 KL Retainer adaptor for pressure spindle 1 KL Retainer adaptor for mechanical spindle 2 KL Pull spindle M10x KL Shoulder nut M10x KL Pull spindle M12 1 KL Shoulder nut M12 2 KL Pull spindle M14 1 KL Shoulder nut M14 2 KL Pull spindle M16 1 KL Shoulder nut M16 2 KL Pull spindle M18 1 KL Shoulder nut M18 2 KL Pull spindle M20 1 KL Clamping nut 2 KL Pressure spindle M20 x 350 mm 1 KL Spindle 1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (527) 10-31

32 KL E Puller Set, in a Foam Insert KL E The tools of this set are designed be used with the KL hydraulic cylinder for pressing out drive shafts. The set can also be used in conjunction with the KL slide hammer puller to extract wheel hubs, half-shafts, universally jointed drive shafts, brake drums etc. The tool control foam inserts of the KL Series are designed to keep the tools of the KL Puller Tool Series always properly organised and well protected. KL K Puller Set, in a Storage case KL K Puller Set in a Storage case KL E Puller Set, in a Foam Insert 1 KL Plastic storage case 1 KL E Puller Set, in a Foam Insert KL Puller Set 1 KL Foam insert 1 KL Puller Set KL Pressure Piece 1 KL Adaptor 1 KL Shoulder Nut M14 4 KL Puller Plate, Size 2 (3-, 4- and 5-hole) 1 KL Puller Bolt Type B, M12x KL Puller Bolt Type B, M12x1.5 1 KL Puller Bolt Type B, M14x1.5 1 KL Puller Bolt Type B, M14x KL Puller Bolt Type M, M12x KL Puller Bolt Type M, M12x1.5 1 KL A Puller Bolt Type M, M14x1.5 1 KL E Wheel Bearing Tool Set 1, in a Foam Insert KL E For the quick, safe and professional removal and installation of wheel bearings. The tool control foam inserts of the KL Series are designed to keep the tools of the KL Wheel Bearing Tool Series always properly organised and well protected.the modules can conveniently be stored in a workshop trolley such as the KL but also fit snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam inserts are provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL K Wheel Bearing Tool Set 1 Wheel Bearing Tool Set 1 in a Plastic storage case KL E Wheel Bearing Tool Set 1, in a Foam Insert 1 KL Plastic storage case 1 KL E - Wheel Bearing Tool Set 1, base tool in a Foam Insert (not shown) As KL E however, without drive. KL E Wheel Bearing Tool Set 1, in a Foam Insert KL Wheel Bearing Tool Set 1 1 KL Foam Insert 1 KL Wheel Bearing Tool Set 1 KL Wheel Bearing Tool Set 1, base tool 1 KL Retainer adaptor for clamping nut 1 KL Retainer adaptor for mechanical spindle 1 KL Spindle 1 KL Clamping nut, M20 1 KL Wheel Bearing Tool Set 1, base tool KL Pressure ring, Ø 60 mm 1 KL Centring ring, Ø 39 mm 1 KL Pressure ring, Ø 64 mm 1 KL Centring ring, Ø 40 mm 1 KL Pressure ring, Ø 68 mm 1 KL Centring ring, Ø 41 mm 1 KL Pressure ring, Ø 72 mm 1 KL Centring ring, Ø 42 mm 1 KL Pressure ring, Ø 74 mm 1 KL Centring ring, Ø 43 mm 1 KL Pressure ring, Ø 80 mm 1 KL Centring ring, Ø 45 mm 1 KL Pressure ring, Ø 82 mm 1 KL Bearing cover 1 KL Pressure ring, Ø 85 mm 1 KL Housing 1 KL Pressure ring, Ø 96 mm 1 KL Centring ring, Ø 70 mm 1 KL Centring ring, Ø 34 mm 1 KL Centring ring, Ø 75 mm 1 KL Centring ring, Ø 38 mm 1 KL Centring ring, Ø 80 mm 1 KL Centring ring, Ø 60 mm (528) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

33 General Repairs Wheel Bearing Tool Set 2, in a Foam Insert These tools are designed to be used in conjunction with the KL tool set for pressing out and pressing in wheel bearings. KL E KL E The tool control foam insert of the KL Series is designed to keep the tools of the KL wheel bearing tool series always properly organised and well protected. The module can conveniently be stored in a workshop trolley such as the KL but also fits snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam insert is provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL E Wheel Bearing Tool Set 2, in a Foam Insert KL Wheel Bearing Tool Set 2 1 KL Foam Insert 1 KL Wheel Bearing Tool Set 2 KL Pressure ring, Ø 54 mm 1 KL Centring ring, Ø 29 mm 1 KL Pressure ring, Ø 61 mm 1 KL Centring ring, Ø 30 mm 1 KL Pressure ring, Ø 62 mm 1 KL Centring ring, Ø 31 mm 1 KL Pressure ring, Ø 63 mm 1 KL Centring ring, Ø 32 mm 1 KL Pressure ring, Ø 65 mm 1 KL Centring ring, Ø 33 mm 1 KL Pressure ring, Ø 66 mm 1 KL Centring ring, Ø 35 mm 1 KL Pressure ring, Ø 67 mm 1 KL Centring ring, Ø 36 mm 1 KL Pressure ring, Ø 69 mm 1 KL Centring ring, Ø 37 mm 1 KL Pressure ring, Ø 70 mm 1 KL Centring ring, Ø 44 mm 1 KL Pressure ring, Ø 71 mm 1 KL Centring ring, Ø 46 mm 1 KL Pressure ring, Ø 73 mm 1 KL Centring ring, Ø 47 mm 1 KL Pressure ring, Ø 75 mm 1 KL Centring ring, Ø 48 mm 1 KL Pressure ring, Ø 76 mm 1 KL Centring ring, Ø 49 mm 1 KL Pressure ring, Ø 77 mm 1 KL Centring ring, Ø 50 mm 1 KL Pressure ring, Ø 78 mm 1 KL Centring ring, Ø 51 mm 1 KL Pressure ring, Ø 79 mm 1 KL Centring ring, Ø 52 mm 1 KL Pressure ring, Ø 81 mm 1 KL Centring ring, Ø 53 mm 1 KL Pressure ring, Ø 83 mm 1 KL Centring ring, Ø 54 mm 1 KL Pressure ring, Ø 84 mm 1 KL Centring ring, Ø 55 mm 1 KL Pressure ring, Ø 86 mm 1 KL Centring ring, Ø 56 mm 1 KL Pressure ring, Ø 87 mm 1 KL Centring ring, Ø 57 mm 1 KL Pressure ring, Ø 88 mm 1 KL Centring ring, Ø 58 mm 1 KL Pressure ring, Ø 89 mm 1 KL Centring ring, Ø 59 mm 1 KL Pressure ring, Ø 90 mm 1 KL Centring ring, Ø 60 mm 1 KL Centring ring, Ø 25 mm 1 KL Centring ring 1 KL Centring ring, Ø 26 mm 1 KL Adaptor ring (conical) 1 KL Centring ring, Ø 27 mm 1 KL Adaptor ring (conical) 1 KL Centring ring, Ø 28 mm 1 KL Adaptor ring (cylindrical) 1 Wheel Bearing Tool Set 2 KL K Wheel Bearing Tool Set 2 in a Plastic storage case KL E Wheel Bearing Tool Set 2 in a Foam Insert 1 KL Plastic storage case 1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (529) 10-33

34 KL E Wheel Bearing Tool, without Hydraulic Cylinder, in a Foam Insert KL E Suitable for VW-Audi, Seat, Skoda. The KL wheel bearing tool enables the quick and trouble-free removal of flanged one-piece compact wheel hub/wheel bearing units (bearing-ø 85 mm). It can also be used for the separate removal and installation of wheel hubs and for the removal of mounting flanges from two-piece compact wheel bearings. For this, the hydraulic cylinder KL , retainer adaptor KL , retainer adaptor KL , pull spindle M20 KL are needed. The tool control foam insert of the KL Series is designed to keep the tools of the KL Wheel Bearing Tool Series always properly organised and well protected. The module can conveniently be stored in a workshop trolley such as the KL but also fits snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam insert is provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL E Wheel Bearing Tool, without Hydr. Cyl., in a Foam Insert KL Wheel Bearing Tool without Hydraulic Cylinder 1 KL Foam Insert 1 KL Wheel Bearing Tool, without Hydraulic Cylinder KL Clamping nut, Ø 38 mm 1 KL Cover 1 KL Support sleeve with pins 1 KL Support plate 1 KL Spacer bolt M12, 18 mm long 3 KL Spacer bolt M12, 11 mm long 1 KL Hexagon socket screw, M6 x 45 mm 1 KL Hexagon socket screw, M6 x 35 mm 1 KL Countersunk screw, M6 x 30 mm 3 KL Pressure ring, Ø 65 mm 1 KL Centring ring, Ø 60 mm 1 KL Plastic box 1 KL Spacer disc, 7 mm 3 KL Support plate 1 KL Spacer bolt M12, 15 mm 2 KL Spacer sleeve, 14 mm 1 KL Spacer bolt M12, 55 mm 1 KL Spacer bolt M12, 45 mm long 4 KL Support bolt, 27.5 mm 2 KL Support bolt, 57.5 mm 2 KL Support bolt, 45 mm 2 KL Adaptor 1 KL Hexagon socket screw, M6 x 30 mm 1 KL Hexagon socket screw, M6 x 40 mm 2 KL Hexagon socket screw, M6 x 70 mm 4 KL Hexagon socket screw. M6 x 25 mm 1 KL Hexagon socket screw, M6 x 80 mm 1 KL Pressure ring, Ø 75 mm 1 KL Pressure ring, Ø 82 mm 1 KL Pressure ring, Ø 90 mm 1 KL Pull spindle M20 1 KL Puller disc 1 KL Puller bolt (short), M14x1.5 3 KL Adaptor 1 KL Hex nut M14 3 emeine PM Werkzeuge (530) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

35 General Repairs Wheel Bearing Tool, in a Foam Insert (Pat.) KL E The KL E wheel bearing tool enables the quick, safe and accurate installation of wheel hub bearing units. For this, the hydraulic cylinder KL and pull spindle M20 x 550 mm KL are necessary. KL E KL E Wheel Bearing Tool, in a Foam Insert KL Wheel Bearing Tool 1 KL Foam Insert 1 KL Wheel Bearing Tool KL Wheel Bearing Tool 1 KL Centring ring, Ø 59 mm 1 KL Pressure screw M12x KL Clamping jaws (pair) 1 KL Pressure/support sleeve 1 KL Clamping jaws (pair), Ø 66 mm 1 Wheel Bearing Tool in a Storage case KL K KL K Wheel Beating Tool in a Storage case KL E Wheel Bearing Tool in a Foam Insert 1 KL Plastic storage case 1 Wheel Bearing Tool, in a Foam Insert (Pat.) KL E The KL E wheel bearing tool enables the quick, safe and accurate installation of wheel hub bearing units. For this, the hydraulic cylinder KL and pull spindle M20 x 550 mm KL are necessary. KL E KL E Wheel Bearing Tool, in a Foam Insert KL Wheel Bearing Tool 1 KL Foam Insert 1 KL Wheel Bearing Tool KL KL KL KL KL KL KL KL KL KL Pressure ring, Ø 65 mm Pressure ring, Ø 72 mm Pressure ring, Ø 73 mm Pressure ring, Ø 83 mm Pressure ring, Ø 88 mm Pressure ring, Ø 89 mm Pressure ring, Ø 93 mm Pressure/Support sleeve (short), Ø 74 mm Pressure/Support sleeve (short), Ø 82 mm Centring sleeve (long), Ø 27.4 mm 1 KL KL KL B 1 KL B 1 KL D 1 KL KL Centring sleeve (long), Ø 29.7 mm Pressure screw M14x1.5 Clamping jaws (pair), Ø 72 mm Clamping jaws (pair), Ø 85 mm Clamping jaws (pair), Ø 78 mm Guide sleeve, Ø 29.5 mm Guide sleeve, Ø 26.3 mm 1 KL Housing 1 1 KL D Cap Wheel Bearing Tool KL K KL K Wheel Bearing Tool in a Storage case KL E Wheel Bearing Tool in a Foam Insert 1 KL Plastic storage case 1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (531) 10-35

36 KL E Wheel Hub Puller, without Hydraulic Cylinder, in a Foam Insert (German Utility Model) KL E KL K Wheel Hub Puller without Hydr. Cyl. Wheel hub bearing units or wheel hubs having a diameter of up to 250 mm can be extracted quickly, safely and professionally by using the KL E wheel hub puller. For this, the hydraulic cylinder KL and pull spindle M20 x 550 mm KL are necessary. The tool control foam insert of the KL Series is designed to keep the tools of the KL Wheel Bearing Tool Series always properly organised and well protected. The module can conveniently be stored in a workshop trolley such as the KL but also fits snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam inserts are provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. Note: The plates KL and KL are used as spacer/adjustment plates. They are necessary when, while extracting a wheel hub, the support takes place via the bottom side of the hooks and if the supporting surface is not even. KL E Wheel Hub Puller without Hydr. Cyl. KL Wheel Hub Puller without Hydraulic Cylinder 1 KL Infoam Insert 1 KL K Wheel Hub Puller without Hydr. Cyl. KL E Wheel Hub Puller without Hydr. Cyl. in a Foam Insert 1 KL Plastic storage case 1 KL Wheel Hub Puller, with Adjusting Spindle KL Wheel hub puller (base tool), with adjusting spindle 1 KL Adaptor M42x2 1 KL Clamping nut, Ø 38 mm 1 KL Clamping nut, Ø 30 mm 1 KL Plate with magnet 4 mm 1 KL Plate with magnet 6 mm 1 KL E Pressure/Support Sleeve Set, Ø mm (short) 45 mm, in a Foam Insert KL E Indispensable kit for pressing in and pressing out silentblocs, shafts, bushings etc. Used in conjunction with the tools of the KL Series. The tool control foam insert of the KL Series is designed to keep the tools of the KL Silentbloc Tool Series always properly organised and well protected. KL E Pressure/Support Sleeve Set KL Pressure/Support Sleeve Set, Ø mm, (short) 45 mm 1 KL Foam Insert 1 KL K Pressure/Support Sleeve Set KL Pressure/Support Sleeve Set, Ø mm (short) 45 mm KL Ø 30 / 22 mm 1 KL Ø 62 / 54 mm 1 KL Ø 32 / 24 mm 1 KL Ø 64 / 56 mm 1 KL Ø 34 / 26 mm 1 KL Ø 66 / 58 mm 1 KL Ø 36 / 28 mm 1 KL Ø 68 / 60 mm 1 KL Ø 38 / 30 mm 1 KL Ø 70 / 62 mm 1 KL Ø 40 / 32 mm 1 KL Ø 72 / 64 mm 1 KL Ø 42 / 34 mm 1 KL Ø 74 / 66 mm 1 KL Ø 44 / 36 mm 1 KL Ø 76 / 68 mm 1 KL Ø 46 / 38 mm 1 KL Ø 78 / 70 mm 1 KL Ø 48 / 40 mm 1 KL Ø 80 / 72 mm 1 KL Ø 50 / 42 mm 1 KL Ø 82 / 74 mm 1 KL Ø 52 / 44 mm 1 KL Ø 84 / 76 mm 1 KL Ø 54 / 46 mm 1 KL Ø 86 / 78 mm 1 KL Ø 56 / 48 mm 1 KL Ø 88 / 80 mm 1 KL Ø 58 / 50 mm 1 KL Ø 90 / 82 mm 1 KL Ø 60 / 52 mm 1 KL K Pressure/Support Sleeve Set Part No. Description Qty KL E Pressure/Support Sleeve Set in a Foam Insert 1 KL Plastic storage case (532) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

37 General Repairs Pressure/Support Sleeve Set, Ø mm (long) 115 mm, in a foam insert KL E Indispensable kit for pressing in and pressing out silentblocs, shafts, bushings etc. Used in conjunction with the tools of the KL Series. The tool control foam insert of the KL Series is designed to keep the tools of the KL Silentbloc Tool Series always properly organised and well protected. KL E KL E Pressure/Support Sleeve Set KL Pressure/Support Sleeve Set, Ø mm, (long) 115 mm 1 KL Foam Insert 1 KL Pressure/Support Sleeve Set, Ø mm, (long) 115 mm KL Ø 30 / 22 mm 1 KL Ø 62 / 54 mm 1 KL Ø 32 / 24 mm 1 KL Ø 64 / 56 mm 1 KL Ø 34 / 26 mm 1 KL Ø 66 / 58 mm 1 KL Ø 36 / 28 mm 1 KL Ø 68 / 60 mm 1 KL Ø 38 / 30 mm 1 KL Ø 70 / 62 mm 1 KL Ø 40 / 32 mm 1 KL Ø 72 / 64 mm 1 KL Ø 42 / 34 mm 1 KL Ø 74 / 66 mm 1 KL Ø 44 / 36 mm 1 KL Ø 76 / 68 mm 1 KL Ø 46 / 38 mm 1 KL Ø 78 / 70 mm 1 KL Ø 48 / 40 mm 1 KL Ø 80 / 72 mm 1 KL Ø 50 / 42 mm 1 KL Ø 82 / 74 mm 1 KL Ø 52 / 44 mm 1 KL Ø 84 / 76 mm 1 KL Ø 54 / 46 mm 1 KL Ø 86 / 78 mm 1 KL Ø 56 / 48 mm 1 KL Ø 88 / 80 mm 1 KL Ø 58 / 50 mm 1 KL Ø 90 / 82 mm 1 KL Ø 60 / 52 mm 1 Pressure/Support Sleeve Set KL K KL K Pressure/Support Sleeve Set KL E Pressure/Support Sleeve Set, Ø mm, in a Foam Insert 1 KL Plastic storage case 1 Press Frame Kit, without Hydraulic Cylinder, in a Foam Insert KL E Indispensable kit for pressing in and pressing out suspension ball joints, bushings etc. Used in conjunction with the tools of the KL Series. The tool control foam insert of the KL Series is designed to keep the tools of the KL press frame kit always properly organised and well protected. The module can conveniently be stored in a workshop trolley such as the KL but also fits snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam insert is provided with specifically tool-shaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL E KL E Press Frame Kit, without Hydr. Cyl., in a Foam Insert KL Press Frame Kit, without Hydr. Cyl. 1 KL Foam Insert 1 KL Press Frame Kit, without Hydr. Cyl. KL Press Frame Kit, without Drive 1 KL Retainer adaptor for clamping nut 1 KL Pressure spindle, M18 x 350 mm, with O-Ring 1 KL Press Frame Kit, without Drive KL Press Frame (Lightweight, Short Design) 1 KL Pullspindle M18, 375 mm long 1 Press Frame Kit without Hydr. Cyl. KL K KL K Press Frame Kit KL E Press Frame Kit without Hydr. Cyl. in a Foam Insert 1 KL Plastic storage case 1 KL E - Press Frame Kit without Hydr. Cyl. in a Foam Insert (not shown) As KL E however, with Hydraulic Cylinder. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (533) 10-37

38 KL E Hydraulic Press Tool Set, without Hydr. Cylinder, in a Foam Insert (German Utility Model) KL E The KL E hydraulic press tool set is used in conjunction with a hydraulic pump (such as KL M25) and the KL hydraulic cylinder, thus allowing for the quick and easy extraction/insertion of the upper/ lower ball joints that are found on the lower wishbone. The tool control foam insert of the KL Series is designed to keep the tools of the KL Tool Series always properly organised and well protected. The module can conveniently be stored in a workshop trolley such as the KL but also fits snugly in the robust stackable plastic storage cases of the KL Series. This ingenious tool storage system from KLANN allows you to find the tool you need quickly and easily, and to identify missing tools at a glance. As a result, repairs can be carried out more efficiently - saving you time and money. The foam insert is provided with specifically toolshaped spaces to ensure that tools are safely stored and can be taken out and put back in place with ease. KL E Hydr. Press Tool Set, without Hydr. Cyl. in a Foam Insert KL Hydraulic Press Tool Set, without Hydraulic Cylinder 1 KL Foam Insert 1 KL K Hydr. Press Tool Set KL Hydr. Press Tool Set, without Hydr. Cyl. KL Pressure/Support Sleeve (short), Ø 34 / 26 mm 1 KL Pressure/Support Sleeve (short), Ø 40 / 32 mm 1 KL Pressure/Support Sleeve (short), Ø 42 / 34 mm 1 KL Pressure/Support Sleeve (short), Ø 50 / 42 mm 1 KL Pressure spindle M20 x 350 mm with O-Ring 1 KL A Sleeve (upper) VW T4 1 KL Press Frame 1 KL Adaptor ring 1 1 KL Adaptor ring 3 1 KL A Adaptor ring 4 1 KL A Press piece (removal) Ø 60 mm 1 KL Press piece (installation) Ø 56 / 58 mm 1 KL Adaptor ring 5 1 KL Pressure sleeve 1 KL K Hydr. Press Tool Set Hydr. Press Tool Set, without Hydr. Cyl. KL E 1 in a Foam Insert KL Plastic storage case 1 KL Drawer Divider, 100 mm (with Rivets) KL Designed to divide the drawers of the workshop trolley KL PM (534) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

39 Kapitel_10_GB.fm Seite 535 Freitag, 1. August :17 10 THE Indispensable General Repairs HGV Tools THE Indispensable HGV Tools See our full range of HGV / Commercial Vehicle Tools in our HGV Catalogue or at Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany- -HGV-Highlights 8.E1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany Titel-Nfz.indd 1 (535) (535) :41:13

40 KL A Ball Joint Extractor Set (with 6 forks) (Pat.) KL A Universally suitable for HGV and small commercial vehicles. Indispensable for the quick and easy separation of ball joint connections in suspension and steering systems. The ever-increasing number of different ball-joints used in today s vehicle suspension and steering systems has led to the need for an ever-widening range of ball-joint extractors for separating ball joint connections from steering knuckles and steering arms. This is mainly due to the different diameters and sizes of the ball-joints. Conical ball-joint pins, for example, require an increased stability and strength of the ball-joint extractors in order to achieve easy separation. When separating ball joint connections, it is crucial that the separation pressure point and the angle can be adjusted on the extractor. The ball joint extractor set KL A from KLANN offers automotive technicians and mechanics a tool with high stability and universal application possibilities. The extractor can be adjusted to the corresponding ball joint diameter and pivot pin height simply by changing the forks. KL A Ball Joint Extractor Set (with 6 forks) KL Base tool without fork (Spindle M24x1.5) 1 KL Fork a=30 mm, e=80 mm, d=200 mm - e.g. suitable for Landini-Tractors 1 KL Fork a=34 mm, e=80 mm, d=200 mm 1 KL Fork a=40 mm, e=80 mm, d=200 mm - e.g. suitable for Mercedes, MAN, Scania, Volvo, etc. 1 KL Fork a=42 mm, e=80 mm, d=200 mm - e.g. suitable for Mercedes, MAN, Scania, Volvo, etc. and John Deere-Tractors. 1 KL Fork a=47 mm, e=80 mm, d=200 mm 1 Fork a=30 mm, e=80 mm, d=200 mm - e.g. suitable for KL suspension ball joints MB Sprinter (1995 onwards) and VW LT (1998 onwards), upper ball joint VW T4 etc. 1 KL Ball Joint Extractor, Size 3 (Pat.) KL Suitable for suspension ball joints MB Sprinter (1995 onwards), VW LT (1998 onwards); upper ball joint VW T4, MB Citaro EvoBus O 530 stabiliser ball joint etc. (Fork opening a=33 mm) The ball joint extractor KL (composed of KL and KL ) is the ideal tool for separating ball joint connections in suspension and steering systems. KL Ball Joint Extractor, Size 3 KL Base tool without fork (Spindle M24x1.5) 1 KL Fork - a=33 mm - e=80 mm - d=200 mm 1 See our full range of HGV / Commercial Vehicle Tools in our HGV Catalogue or at (536) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

41 General THE Indispensable Repairs HGV Tools Thread Repair Tool (adjustable) M50x1.5 - M110x1.5 KL KA Universally suitable for right-hand and left-hand threads from M50x1.5 - M110x1.5 KL K Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL KA Thread Repair Tool (adjustable) M50x1.5 - M110x1.5 KL Base Tool R110 1 KL R Set of thread rollers P=1.5 mm (right-hand thread) 1 KL L Set of thread rollers P=1.5 mm (left-hand thread) 1 KL Plastic storage case with insert 1 Wheel Bearing Centring Sleeve KL Suitable for the Mercedes front axle / 027 / 028, e.g. on Atego etc. KL Designed to install compact wheel bearings with wheel hub, allowing the user to slide the bearings on the axle tube accurately and without the risk of jamming. Connection thread: Size (waf): M45x mm 145 mm 6-Pin Lock Nut Socket, Ø 117 mm, MAN KL Suitable for MAN TGA rear axle HY 1350 KL Ideal for loosening or tightening lock nuts, for example those on front and rear axles. Drive: 3/4" Connecting thread: M56x1.5 KL Pin Lock Nut Socket, Ø 117 mm, MAN Part No. Description Ø 1 Ø 2 length Pin number Pin width KL Pin Lock Nut Socket 117 mm 111 mm mm KL Guide tube 66.5 mm 135 mm Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (537)

42 KL Pin Lock Nut Socket, Mercedes KL Suitable for Mercedes, e.g ACTROS rear axles HL/ HL8. Ideal for loosening or tightening lock nuts, for example those on front and rear axles as well as on gearbox and differential flanges. Modular System: Allows base tool and guide tubes to be combined. (observe connection thread) Advantages: Substantial time and cost savings. Universal application. Drive: 3/4" Connection thread: M56x kg KL Pin Lock Nut Socket, Mercedes Ø 1 (mm) Ø 2 (mm) length (mm) Pins number KL Base Tool KL Guide tube width KL Set of Centring Sleeves KL Suitable for DAF, MAN, Mercedes, Ford, Renault, Scania, Volvo. The KL centring sleeve set allows the user easy and trouble-free fitting of HGV and utility vehicle wheels. Any standard 1/2" reversible ratchet can be used to screw in and unscrew the centring sleeves. Rim bolt hole Ø: For bolt thread: 26 mm M22x1.5 KL Torque-Limiting Socket HGV, Size (waf) 32 mm / 650 Nm KL This AccuTorq torque-limiting socket is designed for use with an impact wrench. It works by absorbing excess torque generated by the impact wrench between the 1 drive and the hexagon end into the torsion bar, once the correct torque has been reached. The socket has been calibrated at the time of manufacture. Thus, there is no need for additional adjustments. Thanks to the high quality of the tool, only worn impact wrench anvils or wheel bolts may cause premature wear and tear resulting in a limited lifetime of the socket. The AccuTorq torque-limiting socket ensures that no torque greater than the torque value indicated on the socket will be transmitted. Drive: mm 1.7 kg Size (waf): 32 Tightening torque: 650 Nm (538) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

43 General THE Indispensable Repairs HGV Tools Press Piece- / Sleeve Set, Ø 75 mm Suitable for split silentblocs with bore-ø 75 mm (removed 80 mm) e.g. Mercedes Actros and Atego rear axle anti-roll bar strut. KL KL The press piece- / sleeve set KL used in conjunction with the drive set KL enables the fast, professional and safe removal and replacement of split silentblocs on anti-roll bar struts. Removal and installation of the silentbloc can either be carried out at a work bench or directly on the vehicle if space conditions allow. KL Press Piece- / Sleeve Set, Ø 75 mm KL Conical sleeve Ø 75 mm 1 KL Spring press piece Ø 75 mm 1 KL Centring ring Ø 75 mm 1 KL Centring ring Ø 75 mm 1 KL Press piece, (removal) Ø 75 mm 1 KL Support ring 1 See our full range of HGV / Commercial Vehicle Tools in our HGV Catalogue or at Application example / procedure: 1. Identify bore diameter and select the appropriate tool from the table: 2. Silentbloc Removal: Assemble / mount pulling device as shown below and extract silentbloc by operating the pump Accessoires: KL Press piece (removal) Shoulder nut KL Bore-Ø Puller spindle Support sleeve (long) KL Silentbloc Installation ==> pre-tensioning the new silentbloc: Assemble / mount pulling device and insert new silentbloc into conical sleeve. Silentbloc will be pre-tensioned via the sleeve inner cone. 4. Silentbloc Installation: Assemble / mount pulling device and insert pre-tensioned silentbloc into bore. Shoulder nut Silentbloc Support sleeve (short) KL Shoulder nut Conical sleeve Support sleeve (short) KL Pull spindle Resilient press piece Conical sleeve KL Pull spindle Resilient press piece KL Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (539)

44 KL A Drive Set with Hydr. Cyl. 17 t, for Silentbloc with Ø of up to 70 mm KL A Essential tool set for driving the pressure piece / sleeve sets of the KL Series. The 17 t Hydraulic Cylinder KL can universally be used on other KLANN tools; for example, for changing wheel bearings or suspension ball joints. KL A Drive Set with Hydr. Cyl. 17 t, for Silentbloc with Ø of up to 70 mm KL Hydraulic Cylinder 17 t (without coupling) 1 KL A Drive set without Hydraulic Cylinder 1 KL A Pressure Piece- / Sleeve Set, Ø 65 mm KL A Suitable for split-type silentblocs with bore-ø 65 mm (removed 70 mm) e.g. Mercedes Actros front axle anti-roll bar strut. The pressure piece / sleeve set KL A is used with the drive set KL A thus enabling for the quick, professional and safe removal and installation of split-type silentblocs on anti-roll bars. The removal and installation of the silentbloc can either be carried out at a work bench or directly on the vehicle if space conditions allow. KL A Pressure Piece- / Sleeve Set, Ø 65 mm KL Conical sleeve Ø 65 mm 1 KL A Spring pressure piece Ø 65 mm 1 KL Centring ring Ø 65 mm 1 KL Centring ring Ø 65 mm 1 KL Pressure piece (removal), Ø 65 mm 1 KL Press Piece- / Sleeve Set, Ø 63 mm KL Suitable for split silentblocs with bore-ø 63 mm (removed 65 mm) e.g. MAN TGA front spring bracket, rear silentbloc. The press piece- / sleeve set KL used in conjunction with the drive set KL A, enables the fast, professional and safe removal and replacement of split silentblocs on anti-roll bar struts. Removal and installation of the silentbloc can either be carried out at a work bench or directly on the vehicle if there is enough space available. KL Press Piece- / Sleeve Set, Ø 63 mm KL Conical sleeve Ø 63 mm 1 KL Spring press piece Ø 63 mm 1 KL Centring ring Ø 63 mm 1 KL Centring ring Ø 63 mm 1 KL Press piece, removal Ø 63 mm 1 (540) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

45 General THE Indispensable Repairs HGV Tools Drive Set with Hydr. Cyl. 17 t, for Silentblocs with Ø of up to 50 mm This tool is used as a drive for the pressure piece- / sleeve sets of the KL Series. The 17 t Hydraulic Cylinder KL can universally be used on other KLANN tools; for example, for changing wheel bearings or suspension ball joints. KL Drive Set with Hydr. Cyl. 17t, for Silentblocs with Ø of up to 50mm KL Hydraulic Cylinder 17 t (without coupling) 1 KL Drive Set (without Hydraulic Cylinder) 1 KL KL See our full range of HGV / Commercial Vehicle Tools in our HGV Catalogue or at KL Press Piece- / Sleeve Set, Ø 45 mm Suitable for split silentblocs with bore-ø 45 mm (removed 48 mm) e.g. MAN buses (articulated bus 313/3) stabilizer on front axle. KL The press piece- / sleeve set KL used in conjunction with the drive set KL A, enables the fast, professional and safe removal and replacement of split silentblocs on anti-roll bar struts. Removal and installation of the silentbloc can either be carried out at a work bench or directly on the vehicle if there is enough space available. KL Press Piece- / Sleeve Set, Ø 45 mm KL Conical sleeve Ø 45 mm 1 KL Spring press piece Ø 45 mm 1 KL Centring ring Ø 45 mm 1 KL Centring ring Ø 45 mm 1 KL Press piece, (removal) Ø 45 mm 1 KL Press Piece- / Sleeve Set, Ø 48 mm Suitable for split silentblocs with bore-ø 48 mm (removed 50 mm) e.g. MAN buses (articulated bus 313/3) stabilizer on front axle. KL The press piece- / sleeve set KL used in conjunction with the drive set KL A, enables the fast, professional and safe removal and replacement of split silentblocs on anti-roll bar struts. Removal and installation of the silentbloc can either be carried out at a work bench or directly on the vehicle if there is enough space available. KL Press Piece- / Sleeve Set, Ø 48 mm KL Conical sleeve Ø 48 mm 1 KL Spring press piece Ø 48 mm 1 KL Centring ring Ø 48 mm 1 KL Centring ring Ø 48 mm / Ø 52 mm 1 KL Press piece, (removal) Ø 48 mm 1 Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (541)

46 KL Pressing Device with Hydr. Cylinder (28 t) for HGV Silentbloc Ø 85 mm KL Suitable for split silentblocs with bore-ø 85 mm (removed 88 mm), e.g. Mercedes Actros and Atego rear axle anti-roll bar strut. The pressing device for HGV silentbloc KL in conjunction with a hydraulic pump, enables the quick, professional and safe removal and replacement of split silentblocs on anti-roll bar struts. Removal and installation of the silentblocs can either be carried out at a work bench or directly on the vehicle if space conditions allow. KL Pressing Device with Hydr. Cyl. 28 t for HGV Silentbloc Ø 85 mm KL Drive set Ø 70 mm with press frame and Hydr. Cyl. 28 t 1 KL Press piece- / sleeve set Ø 85 mm 1 KL A Set of Sleeves for Drawbar Silentbloc KL A Suitable for silentblocs with a bore Ø of 57 mm, for example for those found on Regensburger HGV trailer drawbars. The KL A sleeve set is used in conjunction with retainer adaptor KL , pull spindle KL and hydraulic cylinder KL , thus allowing for the quick and easy removal and replacement of HGV trailer drawbar silentblocs. KL A Set of Sleeves for Drawbar Silentbloc KL Pressure piece 1 KL Pressure-/support sleeve (long) Ø 72 mm 1 KL Conical sleeve 1 KL M25 Hydraulic Hand Pump KL M25 The hydraulic hand pump KL M25 is used to drive the Hydraulic Cylinders KL and KL The hydraulic pressure and necessary force can be checked while operating the pump at pressure gauge KL (supplied with the tool set). The pressure gauge features a tonne scale which is specifically adapted to our KL Hydraulic Cylinder (17 t). Max. Pressure: 7.5 kg 700 bar Note: A hydraulic hand pump with a pressure gauge precisely adapted to the Hydraulic Cylinder KL (10 t) or KL (28 t) is available as accessory upon request. KL M25 Hydraulic Pump (Pneumatic) KL M25 The pneumatic hydraulic pump KL M25 can be used as a drive for Hydraulic Cylinders. Compressed air is used to power the hydraulic pump. The pump is operated by a foot-pedal with 3 positions - for pump, stop and release. Advantage: Both hands free to work. Maximum Pressure: Operating Pressure: 700 bar 8-12 bar 8 kg (542) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1

47 General THE Indispensable Repairs HGV Tools King Pin Press (65 t), with Sleeve Set KL This press enables king pins on lorries to be pressed in and pressed out quickly and without any trouble. Thanks to its unique and compact design featuring an integrated hand pump, a Hydraulic Cylinder equipped with a quick pneumatic 'Extend / Retract 'stroke valve as well as a universally pre-adjustable press frame with an exchangeable bridge, the hydraulic press can be used directly on the vehicle. KL Advantages: Universal application, can be used in-situ on the vehicle as well as in a free-standing position. Substantial time savings. Universally adjustable, 180 swivelling press frame. The three-axle quick adjustment mechanism allows for the quick and easy positioning of the tool on the vehicle. Press force capacity: Clearance between puller bolts: Clearance height (max.): Stroke: Nominal pressure: Air supply (max.): Oil filling volume: 65 t 275 mm 480 mm 120 mm 420 bar 13 bar ca. 130 kg ca. 3.5 Liter E KL A KL King Pin Press (65 t), with Sleeve Set KL King Pin Press 65 t without sleeve set 1 KL A Sleeve Set 1 KL A Sleeve Set KL Mandrel Ø 21.5 mm, length 95 mm 1 KL Mandrel Ø 30 mm, length 95 mm 1 KL Mandrel Ø 34 mm, length 95 mm 1 KL Mandrel Ø 21.5 mm, length 185 mm 1 KL Mandrel Ø 30 mm, length 185 mm 1 KL Mandrel Ø 34 mm, length 185 mm 1 KL Mandrel Ø 21.5 mm, length 275 mm 1 KL Mandrel Ø 30 mm, length 275 mm 1 KL Support ring Ø 90 mm 1 KL Support ring Ø 63 mm 1 KL Spacer ring Ø 70.5 mm for bridge 1 KL Pressure piece Ø 58 mm 1 See our full range of HGV / Commercial Vehicle Tools in our HGV Catalogue or at Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (543)

48 KL Flywheel-Rotating Tool with three Sprockets KL Suitable for Mercedes Actros engines, MAN HGV equipped with 5-, 6- or 8- cylinder engines. This tool allows the accurate rotating of the engine for valve setting or other maintenance and service work. Drive: 1/2" KL Oil Filter Pliers, Ø mm KL Suitable for big oil filters, for example for those fitted to HGV, tractors, etc. The tool features 2 adjusting stages allowing a wide operating range of from 92 to 152 mm. For better handling, the jaws are angled by 20. Hardened teeth prevent the tool from slipping. Technicl Data: Renge: Ø mm 760 g KL K Clutch Aligner, HGV, (in a Storage Case) KL K Suitable for HGV equipped with single- or double-disc clutches. This tool enables the accurate alignment of single- or double-disc clutches having an inner hub diameter of from 36 to 52 mm. Kit comes with centring sleeves with Ø 20, 25, 27 and 30 mm. KL K Clutch Aligner, HGV (in s Storage Case) KL Clutch-centring pin, size 1, Ø mm 1 KL Clutch-centring pin, size 2, Ø mm 1 KL Centring sleeve, Ø 20 mm 1 KL Centring sleeve, Ø 25 mm 1 KL Centring sleeve, Ø 27 mm 1 KL Centring sleeve, Ø 30 mm 1 KL Plastic Storage Case 1 (544) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1