General Repairs General Repairs

Transcription

1 General Repairs (481) 10-01

2 KL Flexible Magnetic Lifter (retractable) KL PM Magnetic Lifter with flexible Shaft. The lifting magnet is located within an anti-magnetic sleeve. This allows the tool to be positioned accurately before the magnet comes into operation. The magnet is triggered by pressing the handle which slides back the protective antimagnetic sleeve. Magnet power: Magnetic head -Ø: : 400 g 7 mm 560 mm 80 g KL Flexible Magnetic Lifter (aluminium) KL With flexible shaft, which will remain in any desired bended position. Magnet power Magnetic head -Ø 600 g 8 mm 540 mm 30 g KL Flexible Magnetic Lifter KL This flexible magnetic lifter enables metallic objects to be removed even from hard-to-reach areas. Magnet power Magnetic head -Ø 600 g 8 mm 470 mm 70 g KL Flexible Magnetic Lifter (strong magnet power) KL This flexible magnetic lifter enables metallic objects to be removed even from hard-to-reach areas. The flexible shaft will remain in any desired bended position. Magnet power Magnetic head -Ø 2000 g 15 mm 480 mm 140 g KL Telescopic Magnetic Lifter with Scriber KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. The KL magnetic lifter is ideal for lifting valve collets. Magnetic head -Ø Magnet power 7.5 mm 300 g mm 28 g KL Telescopic Magnetic Lifter (extra strong magnet power) KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. Magnetic head -Ø Magnet power mm 11 mm 1600 g 33 g (482)

3 Telescopic Magnetic Lifter (magnet power 3.6 kg) KL This telescopic magnet lifter enables metallic objects or particles to be removed even from hard-to-reach areas. KL Magnetic head -Ø Magnet power mm 15 mm 3600 g 61 g Claw Pickup Tool KL Used for gripping and removing small parts like nuts, bolts, washers, etc. from areas that are hard to reach. KL : 600 mm Flexible Lamp KL This flexible lamp allows even areas that are hard to reach to be illuminated. The flexible shaft, on the end of which is the lamp with a detachable magnetic head, remains in any desired bended position. Two 1.5 volt Mignon-Batteries are additionally required.(not included in the scope of delivery). KL Total length (without batteries) 430 mm 120 g Accessories: KL Spare bulbs set (5 bulbs, 1 magnetic head) Telescopic Mirror KL Allows hard-to-reach places to be easily seen. Any orientation possible (360 rotatable) KL / 720 mm Telescopic Mirror Ø50 mm, 300 mm long KL Allows hard-to-reach places to be easily seen. Any orientation possible (rotatable) KL / 300 mm Telescopic Mirror Ø32, 485 mm long KL Allows hard-to-reach places to be easily seen. Any orientation possible (rotatable) KL / 485 mm (483) 10-03

4 KL Magnetic Valve Collet Lifter (flexible) KL With this flexible mini magnetic lifter, metallic objects can be removed from the smallest crack. Magnetic lifter KL is particularly suitable for lifting/removing valve collets. : Magnet-Ø 3 mm power: Magnet-Ø 4 mm power: 200 mm 6 g 150 g 270 g KL Magnetizing and Demagnetizing Block KL Used to magnetize and demagnetize tools such as screwdrivers, blades and other small parts made of iron. KL Set of Tweezers KL piece tweezer set - universal application. Gewicht: 140 g Description Qty. Extra slim, fine tips 125 mm 1 Extra fine tips 115 mm 1 Extra long, rounded tips, self-locking 170 mm 1 Fine tips; 40 angled 145 mm 1 Fine tips; self-locking 120 mm 1 Special tips for instrument bulbs 115 mm 1 KL Set of Hooks KL Designed to ease the removal of "O" rings, cotter pins, seals and bushes in various automotive applications. Blades stainless steel hardened and tempered with impact resistant handles. Hooks can also be used for bodywork interior lining. KL Pry Bar Set KL These pry bars made of special steel are ideal for: Dismantling stubborn components. Positioning components. Holding components in position. Spreading clamp-fixtures, etc. KL Pry Bar Set Part No. Blade width KL " (610 mm) 20 mm KL " (460 mm) 20 mm KL " (310 mm) 16 mm KL " (200 mm) 10 mm (484)

5 Pry Bar KL This pry bar made of special steel is ideal for: Dismantling stubborn components. Positioning and holding components in position. Spreading clamp-fixtures, etc. KL Blade width 900 mm 24mm Pry Bar Set KL Made of special steel for: Dismantling stubborn components. Positioning components. Holding components in position. Checking suspension ball joints and silentblocs. KL Blade width 1 / mm 24 / 33 mm 1600 g 900 mm 24 / 33 mm 1900 g Mounting Lever KL With chrome-plated blade. Special profile ideal for bodywork and inner door trim. KL Blade width: 275 mm 26 mm Magnetic Tray 240 mm x 140 mm KL Stainless Steel Tray with extra strong rubber-protected magnetic feet. KL Size 240 mm x 140 mm Combi-Shears KL High-performance blades of stainless steel for perfect cuts along the whole length of the blade. One serrated blade for cable-cutting. Convenient impact-resistant plastic handles with sprung self-opening action. KL Blade Overall 40 mm 180 mm (485) 10-05

6 KL Stud Tool 3/8 " (Universal) KL Universal tool, infinitely adjustable. Designed to screw in and unscrew studs with diameter 6-12 mm. Advantages: Infinitely adjustable. Suitable for use in very limited space conditions. Also suitable for screws with rusted or stripped threads Also suitable for screws with undersize. Drive: 3/8" Clamping range: 6-12 mm 450 g KL Stud Extracting and Inserting Tool Set KL For removal and replacement of threaded studs (setscrews). Right- or left-hand thread. Outer drive: 21 mm Inner drive: ½" 1.15 kg KL Stud Extracting and Inserting Tool Set Part No. Description Qty. KL Stud extracting and inserting tool for Ø 6 mm 1 KL Stud extracting and inserting tool for Ø 7 mm 1 KL Stud extracting and inserting tool for Ø 8 mm 1 KL Stud extracting and inserting tool for Ø 10 mm 1 KL Stud extracting and inserting tool for Ø 12 mm 1 KL Plastic storage case 1 KL K Screw Extractor Set (Turbo Nuts) KL K Used to extract screws, nuts, and bolts when locating threads or hexagons are damaged. The special design of the inserts (tapered and special left section) allows screws, nuts and bolts to be easily loosened and removed. Drive: 3/8" KL K Screw Extractor Set (Turbo Nuts) Description Qty. Screw extractor 6.3mm (1/4") 1 Screw extractor 8mm (5/16") 1 Screw extractor 9.5mm (3/8") 1 Screw extractor 11mm (7/16") 1 Screw extractor 12.5mm (1/2") 1 Screw extractor 14mm (9/16") 1 Screw extractor 16mm (5/8") 1 Screw extractor 19mm (3/4") 1 Screw extractor 10mm 1 Screw extractor 12mm 1 Screw extractor 13mm 1 Screw extractor 17mm 1 Screw extractor 17.5mm (11/16") 1 Mandrel 1 Plastic storage case (486)

7 Screw Drill Set ( with HSCO drills) KL K Used to remove broken screws and thread bolts with thread M5 - M16. KL K Procedure: 1. Open the broken bolt (or screw) by drilling (use boring bush if necessary). 2. Drive in the pin. 3. Place the nut on the pin and extract by means of a screw-wrench. KL K Screw Drill Set Description Qty. HSCO drill Ø3.2 (1/8") 1 Removal pin 1/8" (1 piece) 1 Removal nut 1/8" 1 HSCO drill Ø4.8 (3/16") 1 Removal pin 3/16" (1 piece) 1 Removal nut 3/16" 1 HSCO drill Ø6.4 (1/4") 1 Removal pin 1/4" (1 piece) 1 Removal nut 1/4" 1 HSCO drill Ø8.0 (5/16") 1 Removal pin 5/16" (1 piece) 1 Removal nut 5/16" 1 HSCO drill Ø8.8 (11/32") 1 Removal pin 11/32" (1 piece) 1 Removal nut 11/32" 1 Drill bush 1/8" Ø4.8 / Ø6.8 1 Drill bush 1/8" Ø4.8 / Ø7.5 1 Drill bush 1/8" Ø4.8 / Ø8.5 1 Drill bush 1/8" Ø4.8 / Ø9.0 1 Drill bush 3/16" Ø7.3 / Ø Drill bush 3/16" Ø7.3 / Ø Drill bush 3/16" Ø7.3 / Ø Drill bush 3/16" Ø7.3 / Ø Drill bush 1/4" Ø9.5 / Ø13 1 Drill bush 1/4" Ø9.5 / Ø14 1 Plastic storage case 1 Set of Drill-Out Pins 1/8" (5 units) KL Set of Drill-Out Pins 1/8" (5 units) KL KL Drill-Ø: 3.2 mm Set of Drill-Out Pins 3/16" (5 units) KL Drill-Ø: 4.8 mm Set of Drill-Out Pins 1/4" (5 units) KL Drill-Ø: 6.4 mm Set of Drill-out Pins 5/16"(5 units) KL Drill-Ø: 8.0 mm Set of Drill-Out Pins 11/32" (5 units) KL Drill-Ø: 8.0 mm (487) 10-07

8 KL K Thread Repair Kit for Drive Shafts KL K Universally suitable for M16x1.5, M18x1,5; M20x1.5, M22x1.5, M24x1.5M, 27x1.5, M30x1.5 Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for Drive Shafts Part No. Description Qty. KL Base tool R36 1 KL Counter bearing M16x1.5 1 KL Counter bearing M18x1.5 1 KL Counter bearing M20x1.5 1 KL Counter bearing M22x1.5 1 KL Counter bearing M24x1.5 1 KL Counter bearing M27x1.5 1 KL Counter bearing M30x1.5 1 KL Thread roller P=1.5 1 KL Plastic storage case with insert 1 KL K Thread Repair Kit for Wheel Studs KL K Universally suitable for M12x1.25, M12x1.5, M14x1.5 Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for Wheel Studs Part No. Description Qty. KL Thread roller P= KL Thread roller P=1.5 1 KL Counter bearing M12x KL Counter bearing M12x1.5 1 KL Counter bearing M14x1.5 1 KL Base tool R16R16 1 KL Plastic storage case with insert 1 KL K Thread Repair Kit for External Threads KL K Universally suitable for M5, M6, M8, M10, M12 Designed to repair threads without removing material. The material is displaced into its original thread shape and cold work hardened by rolling the thread. This special technique allows you to repair a damaged thread without weakening it by removing material, as is the case when filing or cutting the thread. An up to two times higher dynamic load capacity is another advantage that roll-repaired threads have over other repaired threads. KL K Thread Repair Kit for External Threads Part No. Description Qty. KL Thread roller P= KL Thread roller P=1.5 1 KL Thread roller P= KL Thread roller P=1 1 KL Thread roller P=0.8 1 KL Counter bearing M12 1 KL Counter bearing M10 1 KL Counter bearing M8 1 KL Counter bearing M6 1 KL Counter bearing M5 1 KL Base tool R16 1 KL Plastic storage case with insert (488)

9 Thread Repair Upgrade Kit KL Universally suitable for M14 and M16 This kit upgrades our thread repair kit KL K. KL KL Thread Repair Upgrade Kit Part No. Description Qty. KL Thread roller P=2 1 KL Counter bearing M16 1 KL Counter bearing M14 1 Frame Micrometer, 0-25 mm KL Features a clamp ring and ratchet stop. The adjustable concealed spindle is hardened and ground. Comes with heat-insulating pads. Measuring range of from 0 to 25 mm; surfaces chrome-plated. KL Measuring Range: Graduation: 0-25 mm 0.5 mm 350 g Frame Micrometer mm KL Features a clamp ring and ratchet stop. The adjustable concealed spindle is hardened and ground. Comes with heat-insulating pads. Measuring range of from 25 to 50 mm; surfaces chrome-plated. KL Measuring range: Graduation: mm 0.5 mm 500 g Dial Gauge Ø 58 mm KL Spindle and clamping shank made of stainless steel, design and measurement accuracy according to DIN 878-A. KL Reading: 0.01 mm Measuring Range: 10 mm Housing -Ø: 58 mm 1 pointer revolution: 1 mm Clamping shank-ø: 8 mm Dial Gauge Ø 40 mm KL Description: Spindle and clamping shank made of stainless steel, design and measurement accuracy according to DIN 878-E. The dial gauge is additionally equipped with a 10 mm extension (KL ). KL Reading 0.01 mm Measuring Range 5 mm Housing -Ø 40 mm 1 pointer revolution 0.5 mm Clamping shank Ø 8 h 6 (489) 10-09

10 KL Extension Set KL For dial gauge KL & KL The set consist of extensions KL to KL Each extension with Ø 4 mm. Part No. Part No. KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL Messuring Tip (flat) KL For dial gauge KL & KL and extensions KL to KL KL Precision Bore Measuring Tool KL Precision bore measuring tool for measuring cylindrical bores, especially suitable for petrol and diesel engines. Comes with dial gauge and wooden case. Measuring range: Measuring depth: Ø mm 180 mm KL Dial Gauge Stand with Dial Gauge KL Designed to measure the wobble of brake discs. Can also be used for fine-tuning when repairing engines and transmissions. Features: Strong rods of bright steel, fine adjustment for the dial gauge clamp, prismatic magnetic base which can be switched off. KL Support Stand with Dial Gauge Part No. Description Qty. KL Dial gauge Ø 58 mm 1 KL Support stand without dial gauge 1 KL Digital Calliper KL Open slide, hardened, with cross points and depth gauge. Made of stainless steel. Measuring range: Jaw: Reading: 155 mm 40 mm 0.01 mm 200 g (490)

11 Vernier Calliper for Brake Drums KL Measuring surfaces made of hardened stainless steel, scale and slide manufactured from aluminum profile. Open slide, fixing screw, vernier parallaxfree reading. KL Measuring range Jaw: Vernier: 500 mm 250 mm 1/20 mm 1200 g Vernier Calliper for Brake Disc KL Designed to measure the thickness of installed brake discs. The tool is hardened and features a locking screw. Made of matte chrome-plated stainless-steel. KL Measuring Range: Jaw: Vernier: 50 mm 75 mm 1/10 mm 110 g Vernier Calliper for HGV Brake Discs KL Designed to measure the thickness of installed brake discs. The tool is hardened and features a locking screw. Made of matte chrome-plated stainless-steel. KL Mesuring range: Jaw: Vernier: 100 mm 120 mm 1/10 mm 240 g Tire Tread Depth Gauge (Brass Design) KL Sturdy brass design. KL Weigth: Measuring range: Legibility accuracy: 50 g 30 mm 0.1 mm (491) 10-11

12 KL Feeler Gauge (20 Blades) KL Range: mm in 0.05 mm increments. Blade- 100 mm 100 g KL Precision Straightedge 500 mm KL Suitable for fitting cylinder heads up to 4 cylinders. Edges hardened, ground, lapped, with heat-insulated handle. : Quality Description: Cross section: 500 mm Stainless steel 40 7 mm 960 g Accessory: KL Wooden case for precision straightedge KL Precision Straightedge 600 mm KL Suitable for fitting Cylinder Heads up to 6 Cylinders. Edges hardened, ground, lapped, with heat-insulated handle. : Quality Description: Cross section: 600 mm Stainless steel 40 7 mm 1200 g Accessory: KL Wooden case for Precision straightedge KL Wooden Storage Case for Precision Straightedge KL For storing the precision straight edge KL or KL mm 400 g KL Circlip Pliers Ø mm KL Due to the 45 angled tips, this tool is ideal for inside circlips. Required for gearbox and wheel bearing repairs. Tip-Ø : 2.5 mm 220 mm 220 g (492)

13 Circlip Pliers Ø mm KL The specially designed tips of the pliers (angled at 45 ) allow the trouble- free removal and installation of inner circlips when performing gearbox or wheel bearing repairs. KL Tip-Ø : 3 mm 310 mm 410 g Circlip Pliers Set 10-piece Set, consisting of 8 Pliers and 2 Hooks, Pliers reversible for inner or outer Circlips with captive screw. Pliers reversible for inner or outer Circlips Pliers straight and angled Pliers with easy-grip handles Pliers of heat-treated spring-steel - light and handy Hooks straight and angled KL K KL K E For Inner Circlips Tip Ø Tip Form [mm] for Shaft Ø or Bore Ø [mm] [mm] [g] straight / angled / straight angled straight / angled / straight / angled / E Unscrewed E For Outer Circlips Pliers for Special Safety Rings Suitable for large rings on drive shafts in earth-movers and construction vehicles. KL KL Tip form Tip size [mm] 330 mm Inter-changeable, hook-shaped, wide, milled 3.5 x 8 spreading 8-75 mm 490 g Pliers for Special Safety Rings KL Suitable for large rings on drive shafts and articulated axles, e.g. Opel/ Vauxhall, VW-Audi. KL Tip-Form Tip size [mm] 210 mm straight, pointed, short, milled spreading mm 190 g (493) 10-13

14 KL Circlip Pliers KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of application: Deep-seated, large clips on gear shafts and articulated axles. Ideal for drive shafts/cv-joints, engines and gearboxes. : Tip-Form: Min. opening : Max opening : 240 mm straight, centering spigot, long, slim 5 mm 40 mm 210 g KL Circlip Pliers KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of application: Large clips on gear shafts and articulated axles. Ideal for drive shafts/cv-joints, engines and gearboxes. : Tip form: Min. opening: Max. opening: 225 mm straight with retaining profile 6.5 mm 35 mm 205 g KL Circlip Pliers (straight) KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, etc. Tips are angled to 90. The Pliers allow quick and easy removal and replacement of outer circlips during repairs to engines, gearboxes, differentials, steering system, etc. KL Circlip Pliers (angled) KL Suitable for VW-Audi, Mercedes, Opel/Vauxhall, BMW, Ford, etc. Field of Application: Specially designed for deep-seated, large clips on gear shafts and articulated axles that are hard to access. Ideal for drive shafts/cv-joints, engines and gearboxes. : Tip form: Min. opening: Max. opening: 200 mm 30 angled centring spigot, long, slim 3 mm 35 mm 190 g E centre hole (494)

15 Circlip Pliers (angled 90 ) KL For brake calipers and gear boxes, angled 90. KL : Leg length: 190 mm 60 mm Snipe Nose Pliers (long design) KL With extra long grip, straight tips for mounting position that are hard to access. KL mm Snipe Nose Pliers (long design) 45 KL With extra long grip, tips angled 45, for mounting position that are hard to access. KL mm Note: The tool set is supplied in a plastic bag. Open Ended Spanner Socket KL Suitable for track rod Opel/Vauxhall Sintra, etc. Extra-strong design. Ideal for loosening and twisting track rods. KL Size (width across flats): 21 mm Drive: 1/2" 330 g Open-ended Spanner Socket Set KL The exceptionally compact and solid shape of the open-ended spanners enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. KL KL Open-ended Spanner Socket Set Part No. Size (waf) [L1] Height [H1] Width 1 [W1] Width 2 [W2] Opening [O1] Drive KL mm 49 mm 10 mm 35 mm 27 mm 13 mm 3/8" KL mm 49 mm 10 mm 35 mm 27 mm 14 mm 3/8" KL mm 49 mm 10 mm 36 mm 27 mm 15 mm 3/8" KL mm 57 mm 12 mm 40 mm 32 mm 17 mm 1/2" KL mm 60 mm 12 mm 43 mm 33 mm 19 mm 1/2" W1 O1 W2 (495) 10-15

16 KL Open-ended Spanner Socket Set KL The exceptionally compact and solid shape of the open-ended spanners enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. W1 O1 W2 KL Open-ended Spanner Socket Set Part No. Size (waf) [L1] Height [H1] Width 1 [W1] Width 2 [W2] Opening [O1] Drive KL mm 62 mm 12 mm 48 mm 34 mm 23 mm 1/2" KL mm 68 mm 12 mm 52 mm 37 mm 24 mm 1/2" KL mm 72 mm 13 mm 56 mm 39 mm 26 mm 1/2" KL Open-ended Spanner Socket Set KL The exceptionally compact and solid shape of the open-ended spanners enables screws and nuts to be loosened and tightened, even if they are very tight-fitting or hard to access; for example on injection lines, hydraulic lines or compressed-air lines. W1 O1 W2 KL Open-ended Spanner Socket Set Part No. Size (waf) [L1] Height [H1] Width 1 [W1] Width 2 [W2] Opening [O1] Drive KL mm 12 mm 75 mm 29 mm 280 g 1/2" KL mm 13 mm 88 mm 30 mm 380 g 1/2" KL mm 13 mm 92 mm 32 mm 400 g 1/2" KL K Jointed Ring Spanner Socket Set (open-ended) KL K Universally suitable for screwed connections, for example, on brake systems, injection systems etc. This tool is required for loosening and tightening screwed connections. Thanks to the special design of the ring spanners, even screwed connections that are difficult to access can be reached quickly and without any trouble. Profile: Double Hex Drive: 3/8" KL K Jointed Ring Spanner Socket Set (open-ended) Part No. Description Qty. KL Jointed Ring Spanner Socket Size (waf) 14 mm, bi-hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 16 mm bi-hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 17 mm bi-hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 18 mm bi-hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf)19 mm bi-hex, 3/8" 1 KL Plastic storage case (496)

17 Jointed Ring Spanner Socket Set (open-ended) KL KA Universally suitable for screwed connections, for example, on brake systems, injection systems etc. This tool is required for loosening and tightening screwed connections. Thanks to the special design of the ring spanners, even screwed connections that are difficult to access can be reached quickly and without any trouble. KL KA Profile: Hex Drive: 3/8" KL KA Jointed Ring Spanner Socket Set (open-ended) Part No. Description Qty. KL Jointed Ring Spanner Socket Size (waf) 11 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 12 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 14 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 16 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 17 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 18 mm hex, 3/8" 1 KL Jointed Ring Spanner Socket Size (waf) 19 mm hex, 3/8" 1 KL Plastic storage case 1 Bit Insert Set 10 mm Hex / Spline / Torx KL K Consists of: KL Bit-Holder, 10 mm hex; Drive 3/8" the carrier of the Inserts. KL Bit-Holder, 10 mm hex; Drive 1/2" the carrier of the Inserts. KL K Bit Inserts, Drive 10 mm hex; 30 mm Size Part No. Part No. (width across flats) Size (width across flats) KL KL M10 KL KL M12 KL KL T20 KL KL T25 KL KL T30 KL KL T40 KL KL T45 KL M5 KL T50 KL M6 KL T55 KL M8 KL T60 Bit Inserts, Drive 10 mm hex; 75 mm Size Part No. Part No. (width across flats) Size (width across flats) KL KL M10 KL KL M12 KL KL T20 KL KL T25 KL KL T30 KL KL T40 KL KL T45 KL M5 KL T50 KL M6 KL T55 KL M8 KL T60 KL (3/8 ) KL (1/2 ) KL (30 mm) KL (75 mm) KL (30 mm) KL (75 mm) KL Plastic storage case = = reg. trademark of Acument Intellectual Properties, LLC. USA KL (30 mm) KL (75 mm) (497) 10-17

18 KL K Torx Tool Set KL K Consists of: Magnetic Lifter with scriber - KL : Screwdrivers Part-No. Size Part-No. Size KL T8 x 80 mm KL T27 x 100 mm KL T10 x 100 mm KL T30 x 100 mm KL T15 x 100 mm KL T40 x 100 mm KL T20 x 100 mm KL T25 x 100 mm KL T25 x 100 mm Double Ring Spanners Part-No. Size Part-No. Size KL E6 / E8 KL E14 / E18 KL E10 / E12 KL E20 / E24 Sockets, Drive 1/2", 38 mm Part-No. Size Part-No. Size KL Torx E12 KL Torx E20 KL Torx E14 KL Torx E22 KL Torx E16 KL Torx E24 KL Torx E18 Bit-Inserts, Size (waf)10mm - KL drive 1/2" Magnetic Lifter with scriber Screwdrivers Double Ring Spanners Bit-Holder (1/4 ) Bit-Holder (1/2 ) Bit-Inserts (Drive 10 mm) Sockets Inserts (Drive 1/4 ) Bit-Inserts (Drive 1/4 ) Torx Hexagon Socket Keys Head-Ø Lift-capacity 7.5 mm; mm 28 g 400 g Bit-Inserts, Drive size (waf) 10 mm; 30 mm Part-No. Size Part-No. Size KL Torx T40 KL Torx T55 KL Torx T45 KL Torx T60 KL Torx T50 Bit-Inserts, Drive hex 10; 75 mm Part-No. Size Part-No. Size KL Torx T15 KL Torx T45 KL Torx T20 KL Torx T50 KL Torx T25 KL Torx T55 KL Torx T30 KL Torx T60 KL Torx T40 Sockets, Drive 1/4", 23 mm Part-No. Size Part-No. Size KL Torx E4 KL Torx E8 KL Torx E5 KL Torx E10 KL Torx E6 KL Torx E11 KL Torx E7 Socket Inserts, Drive 1/4", 38 mm Part-No. Size Part-No. Size KL Torx T7 KL Torx T20 KL Torx T8 KL Torx T25 KL Torx T9 KL Torx T27 KL Torx T10 KL Torx T30 KL Torx T15 Bit-Holder hex 1/4" KL Drive 1/4" Bit-Inserts, Drive hex 1/4" Part-No. Size Part-No. Size KL Torx T7B KL Torx T20B KL Torx T8B KL Torx T25B KL Torx T9B KL Torx T27B KL Torx T10B KL Torx T30B KL Torx T15B KL Torx T40B Torx Hexagon Socket Keys Part-No. Size Part-No. Size KL Torx T8 KL Torx T55 KL Torx T10 KL Torx T27 KL Torx T15 KL Torx T30 KL Torx T20 KL Torx T40 KL Torx T25 KL Torx T45 KL Torx T50 KL Torx T60 KL Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA (498)

19 Socket Insert Set Torx KL K Consists of: KL Bit-Holder, 1 hex 10 mm; Drive 3/8" carrier for the screwdriver Inserts. KL K KL Bit-Halter, 1 hex 10 mm; Drive 1/2" carrier for the screwdriver Inserts. Bit-Inserts, Drive hex 10 mm; 30 mm KL T20 KL T45 KL T25 KL T50 KL T30 KL T55 KL T40 Bit-Inserts, Drive hex 10 mm; 75 mm KL Torx T20 KL Torx T45 KL Torx T25 KL Torx T50 KL Torx T30 KL Torx T55 KL Torx T40 Sockets, Drive 1/4", 23 mm KL Torx E4 KL Torx E7 KL Torx E5 KL Torx E8 KL Torx E6 Sockets, Drive 3/8", 23 mm KL Torx E10 KL Torx E12 KL Torx E11 KL Torx E14 Sockets, Drive 1/2", 40 mm KL Torx E16 KL Torx E22 KL Torx E18 KL Torx E24 KL Torx E20 KL (3/8 ) KL (1/2 ) KL (30 mm) KL (75 mm) KL (23 mm) KL (23 mm) KL (40 mm) KL Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA Socket Insert Set RIBE (Polydrive) with plastic case KL K Consists of: Bit-Holder, carrier of the screwdriver Inserts,10 mm hex; Drive 1/2" square Bit-Holder, carrier of the screwdriver Inserts,10 mm hex; Drive 3/8" square KL K KL M 4 KL M 4 KL M 5 KL M 5 KL M 6 KL M 6 KL M 7 KL M 7 KL M 8 KL M 8 KL M 9 KL M 9 KL M 10 KL M 10 KL M 12 KL M 12 KL M 13 KL M 13 KL M 14 KL M 14 Plastic storage case: 235 x 140 x 45 mm KL (3/8 ) KL (1/2 ) = reg. trademark of Richard Bergner GmbH & Co. KG KL (30 mm) KL (75 mm) (499) 10-19

20 KL K Screwdriver Bit Set in a plastic storage case (62-piece set) KL K Consists of: Bit-Holder 1/4"; Drive 1/4" for retaining the screwdriver bits Screwdriver Bits: Phillips (PH) Size: 0; 1 (2 pcs.); 2 (3 pcs.); 3 Pozidriv (PZ) Size: 0; 1 (2 pcs.); 2 (2 pcs.); 3 Straight Size: 3; 4; 4.5; 5.5; 6,5 HexSize: 2; 2.5; 3; 4; 5; 6; 7; 8 5-Point Size: T-10; T-15; T-20; T-25; T-27; T-30; T-40; T-45; T-50 RIBE (Polydrive) Size: M4; M5; M6; M7 Torx Size: T-7; T-8; T-9; T-10; T-15; T-20; T-25; T-27; T-30; T-40 Torx Size: T-7; T-8; T-9; T-10; T-15; T-20; T-25; T-27; T-30; T-40 Torx Size: 5; 6; 8 Standard Bit, Spanner, Size: 6; 8; 10 Plastic storage case = reg. trademark of Acument Intellectual Properties, LLC. USA = reg. trademark of Richard Bergner GmbH & Co. KG KL Bit-Ratchet (angled 1/4" and 5/16" with retaining magnet) KL Reversible for left or right-hand rotation. With drives for 5/16 and 1/4" Bit inserts. Each Bit-drive has a knurled thumb-wheel for easy tightening of bolts before final tightening. The Bit-Inserts are retained in the drive by a built-in magnet. Especially useful for areas that are difficult to access. 120 g 132 mm Bit- Drive 1/4" Bit- Drive 5/16" KL Bit-Ratchet (straight 1/4" and 5/16" with retaining magnet) KL Reversible for left or right-hand rotation. With drives for 5/16 and 1/4" Bit Inserts. Each Bit-drive has a knurled thumb-wheel for easy tightening of bolts before final tightening. The Bit-Inserts are retained in the drive by a built-in magnet. Especially useful for areas that are difficult to access. 120 g 140 mm Bit- Drive 1/4" Bit- Drive 5/16" KL Flexible Bit Holder 1/4" with Flexible Extension KL Especially useful for areas that are difficult to access. Screw Driver 375 mm Extension 135 mm Bit- Drive 1/4" 250 g (500)

21 Set of Screwdriver Bit Sockets (5-Point Star), 1/4" For example, suitable for: Mass air flow sensor VW-Audi, Mercedes. Mercedes outside mirror. Immobiliser control unit (EWS3) on Rover 75 and MG ZT. Pumps in pump-line-injection systems on Mercedes HGV (e.g. Atego, Actros). Door lock fastening screws on Ford Fusion KL K KL K 9 Screwdriver Bit Sockets supplied in a plastic storage case. For loosening and tightening 5-point star safety bolts with bore. Consists of: 9x Screwdriver Bit Sockets, Drive: hex 1/4". 1x Bit Holder (for retaining screwdriver bits) hex 1/4"; drive square 1/4" 1x Plastic storage case Size: 10, 15, 20, 25, 27, 30, 40, 45, 50 Drive (Bit-Insert): hex 1/4" Drive (Bit-Holder): 1/4" (Bit-Insert): 25 mm 100 g Set of Screwdriver Bit Sockets (5-Point Star), with Ratchet in a Storage Case Suitable e.g. for: Plug-in pumps in pump-line-injection systems on Mercedes HGV (e.g. Atego, Actros) Mercedes outside mirror Mass Air Flow Sensor VW-Audi, Opel/Vauxhall etc. Immobiliser control unit (EWS3) on Rover 75 and MG ZT Door Lock Fastening Screws on Ford Fusion KL K KL K For loosening and tightening 5-point star safety bolts with bore. Screwdriver Bit Inserts (9 pieces): Drive 1/4" hex; size 10, 15, 20, 25, 27, 30, 40, 45, 50 Bit Reversible Ratchet: hex 1/4"; fine toothed, left-/right reversible Plastic storage case Size: 10, 15, 20, 25, 27, 30, 40, 45, 50 Drive (Bit-insert): hex 1/4" Drive (Bit-holder): hex 1/4" (Bit-insert): 25 mm (ratchet): 94 mm Overall height (ratchet), incl. bit: 28 mm Overall weight: 140 g (501) 10-21

22 KL K Screwdriver Bit Socket Set, Drive 1/2", XZN, 26-piece set KL K KL K Screwdriver Bit Socket Set, Drive 1/2", XZN, 26 pcs. KL KL KL KL Screwdriver Bits, Drive 1/2", 55 mm KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 KL M16 Screwdriver Bits, Drive 1/2", 100 mm KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", 140 mm KL M5 KL M10 KL M6 KL M12 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", 200 mm KL M8 KL M12 KL M10 KL M14 KL Screwdriver Bit Socket XZN-M12, 78 mm, drive 1/2" KL For loosening and tightening XZN M12 fastening screws. Reinforced design, however, not suitable for use on impact wrenches. Size XZN M12 Drive 1/2" 78 mm KL Screwdriver Bit Socket XZN-M14, 78 mm, 1/2" KL Suitable for the shock absorber retaining bore clamping bolt on the front axle steering knuckle on Audi A3 (8P); VW Passat (3C) and Golf V (1K); brake caliper fixing bolt on VW Touran; Passat (3C); Audi A3; Seat Altea and lower ball joint screw on VW T4; T5. For loosening and tightening XZN M14 fixing screws. Reinforced version, however, not suitable for use on impact wrenches. Size: XZN M14 Drive:: 1/2" Lenght: 78 mm KL Screwdriver Bit Socket XZN-M18, 78 mm, drive 1/2" KL Suitable e.g. for Audi A3, VW Polo, Golf V etc. This tool is designed to loosen and tighten the rear axle wheel hub bearing unit fastening screw. Drive: 1/2" Size: XZN-M18 : 78 mm (502)

23 Special Sockets KL This special socket enables the drive shaft fixing screws to be loosened from the differental flange quickly and easily from the outside. Not intended for use on impact wrenches. Advantages Substantial time savings. KL Special Socket XZN M8, 800 mm KL Suitable for VW-Audi, etc. Size (width across flats): XZN M8 Drive: 1/2" : 800 mm Special Socket XZN M10, 800 mm KL Suitable for VW Golf IV etc. Size (width across flats): XZN M10 Drive: 1/2" : 800 mm Special Socket XZN M12, 800 mm KL Suitable for VW T4, Touareg etc. Size (width across flats): XZN M12 Drive: 1/2" : 800 mm Special Socket XZN M14, 800 mm KL Suitable for VW T4, Touareg etc. Size (width across flats): XZN M14 : 800 mm Drive: ½" Special Socket Insert XZN M16 KL Suitable for Audi A3, A4, A6; VW Fox, Golf (IV), LT. This multi-teeth socket features an inner bore and is therefore the ideal tool for oil drain plugs and oil control plugs on gearboxes. KL Drive: 1/2" Screwdriver Socket Insert Set RIBE (Polydrive), 1/2" 8 pieces KL B Suitable for FIAT engines with RIBE (Polydrive) screws. For loosening and tightening RIBE (Polydrive) screws on cylinder head valve drive housings etc. KL B Drive 1/2" KL B Screwdriver Socket Insert Set RIBE (Polydrive) Part No. Description Qty. KL Screwdriver Socket Insert RIBE (Polydrive) M7, 55 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M8, 55 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M10, 140 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M12, 140 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M13, 140 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M14, 140 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M6, 200 mm, 1/2" 1 KL Screwdriver Socket Insert RIBE (Polydrive) M8, 200 mm, 1/2" 1 = registered trademark of Richard Bergner GmbH & Co. KG (503) 10-23

24 KL K Screwdriver Bit Set RIBE (Polydrive), 1/2", 32-piece KL KL KL KL K KL KL K Screwdriver Bit Set RIBE (Polydrive), 1/2", 32-piece Screwdriver Bits, Drive 1/2", 55 mm KL M5 KL M10 KL M6 KL M12 KL M7 KL M13 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", 100 mm KL M5 KL M10 KL M6 KL M12 KL M7 KL M13 KL M8 KL M14 KL M9 Screwdriver Bits, Drive 1/2", 140 mm KL M8 KL M12 KL M9 KL M13 (FIAT) KL M10 (VW) KL M14 KL M10 (FIAT) Screwdriver Bits, Drive 1/2", 200 mm KL M8 KL M12 KL M9 KL M13 (FIAT) KL M10 (VW) KL M14 KL M10 (FIAT) = reg. trademark of Richard Bergner GmbH & Co. KG KL Socket Insert RIBE (Polydrive) M10 KL Ideal to remove and re-tighten cylinder-head retaining bolts on VW-Audi engines with RIBE similar (Polydrive) profile. Drive: 1/2" : 140 mm 100 g KL K Set of Screwdriver Bit Sockets, Torx, 1/2" KL K These special sockets in a reinforced design come in a plastic storage case. They are used for axles and engines repairs. KL K Set of Screwdriver Bit Sockets, Torx, 1/2" Part No. Description Torx Size KL Screwdriver bit socket T30 KL Screwdriver bit socket T40 KL Screwdriver bit socket T45 KL Screwdriver bit socket T50 KL Screwdriver bit socket T55 KL Screwdriver bit socket T60 KL Screwdriver bit socket T70 = reg. trademark of Acument Intellectual Properties, LLC. USA (504)

25 Set of Screwdriver Bit Sockets (Torx ), Drive 1/2", 32-Piece Set KL K KL K Set of Screwdriver Bit Sockets (Torx ) KL K Screwdriver Bit Sockets, Drive 1/2", 55 mm KL T20 KL T45 KL T25 KL T50 KL T27 KL T55 KL T30 KL T60 KL T40 KL T70 Screwdriver Bit Sockets, Drive 1/2", 100 mm KL T20 KL T45 KL T25 KL T50 KL T27 KL T55 KL T30 KL T60 KL T40 KL T70 Screwdriver Bit Sockets, Drive 1/2", 140 mm KL T40 KL T55 KL T45 KL T60 KL T50 KL T70 Screwdriver Bit Sockets, Drive 1/2", 200 mm KL T40 KL T55 KL T45 KL T60 KL T50 KL T70 = reg. trademark of Acument Intellectual Properties, LLC. USA KL KL KL KL Screwdriver Bit Socket Torx T80 KL Manufactured from Chrome Vanadium-Steel. KL Torx : T80 Drive: 1/2" L1: 100 mm L1: 140 mm 250 g = reg. trademark of Acument Intellectual Properties, LLC. USA Screwdriver Bit Socket Torx T90 KL Manufactured from Chrome Vanadium-Steel. KL Torx : T90 Drive: 1/2" L1: 100 mm L2: 140 mm 270 g = reg. trademark of Acument Intellectual Properties, LLC. USA Screwdriver Bit Socket Torx T100 KL Manufactured from Chrome Vanadium-Steel. KL Torx : T100 Drive: 1/2" L1: 100 mm L2: 140 mm 300 g = reg. trademark of Acument Intellectual Properties, LLC. USA (505) 10-25

26 KL K Set of Torx Screwdriver Bit Sockets KL K Set of Torx Sockets in extended length for tamper-proof bolts Torx with pilot. Socket Inserts, Drive: 1/2", : 100 mm KL T30 KL T55 KL T40 KL T60 KL T45 KL T70 KL T50 = reg. trademark of Acument Intellectual Properties, LLC. USA 2093 U-3 T Ratchet with T-handle 1/4" - Code: U-3 T With two-wing plastic T-handle. Ergonomic shape enables fast and convenient working. With metal reversing disc and fine-toothed ratchet wheel, length 140 mm, drive: 1/4" 3093 U-3 T Ratchet with T-handle 3/8" - Code: With two-wing plastic T-handle. Ergonomic shape enables fast and convenient working. With metal reversing disc and fine-toothed ratchet wheel, length 140 mm, drive 3/8" 676 Driving handle 1/4" - Code: Non-slip 2-component handle with recessed hexagon drive 1/4" Insert Bit Holder 1/4" hex - 3/8" square - Code: Technische Daten: : Drive: Drive: 50 mm 1/4" hex 3/8" square 673 6,3 Insert Bit Holder 1/4" hex - 1/4" square - Code: ,3 Technische Daten: : Drive: Drive: 50 mm 1/4" hex 1/4" square (506)

27 Socket Set Torx 1/4" KL Chrome vanadium steel. KL KL Socket Set Torx 1/4" Sockets, Drive 1/4", 200 mm Part No. KL KL KL KL KL Size E5 E6 E7 E8 E10 = reg. Trademark of Acument Intellectual Properties, LLC. USA Set of Screwdriver Bit Sockets, Torx 3/8" KL Chrome vanadium steel. KL KL Set of Screwdriver Bit Sockets Torx 3/8" Screwdriver Bit Sockets, Drive 3/8", 200 mm Part No. KL KL KL KL KL KL KL KL KL KL Size T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 = reg. Trademark of Acument Intellectual Properties, LLC. USA Socket Set Torx 3/8" KL Chrome vanadium steel. KL KL Socket Set Torx 3/8" Sockets, Drive 3/8", 200 mm Part No. KL KL KL KL KL KL Size E6 E7 E8 E10 E11 E12 = reg. Trademark of Acument Intellectual Properties, LLC. USA (507) 10-27

28 KL Socket Set, Torx E10 / E12 / E14 / E18, long, 1/2" KL Suitable for BMW, Mercedes CDI engines, etc. These Torx Sockets in extended length with built-in magnet enable the loosening and tightening of cylinder head bolts with outer-torx profiles. KL Socket Set, Torx E10 / E12 / E14 / E18, long, 1/2" Part No. Torx Drive KL E10 1/2" 150 mm 200 g KL E12 1/2" 150 mm 225 g KL E14 1/2" 150 mm 250 g KL E18 1/2" 150 mm 415 g = registered trademark of Acument Intellectual Properties, LLC. USA KL Socket Insert Set Ball head KL Extra-long design with ball head. Ideal for loosening and tightening internal hex socket screws that sit very deep or are hard to access e.g. on the oil pan, cylinder head, engine, drive, etc. Application examples: KL For oil sump bolts in VW T4 5-cylinder engines. KL Removal and installation of knock sensor on Audi V6 engines. Drive: 1/2" : 288 mm KL Socket Insert Set Ball head Part No. Description Qty. KL Socket Insert, Ball Head, Size (width across flats) 5 1 KL Socket Insert, Ball Head, Size (width across flats) 6 1 KL Socket Insert, Ball Head, Size (width across flats) 8 1 KL Socket Insert, Ball Head, Size (width across flats) 10 1 KL K Screwdriver Bit Set Drive ( hex), 1/2", 30-piece KL K KL K Screwdriver Bit Set (hex), 1/2", 30-piece KL KL KL KL Screwdriver Bits Drive 1/2", 55 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 12 KL hex 6 KL hex 14 KL hex 7 KL hex 17 KL hex 8 KL hex 19 KL hex 10 Screwdriver Bits, Drive 1/2", 100 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 10 KL hex 6 KL hex 11 KL hex 7 KL hex 12 KL hex 8 KL hex 13 Screwdriver Bits, Drive 1/2", 140 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 10 KL hex 6 KL hex 12 KL hex 7 KL hex 14 KL hex 8 Screwdriver Bits, Drive 1/2", 200 mm Part No. Size (waf) Part No. Size (waf) KL hex 5 KL hex 8 KL hex 6 KL hex 10 KL hex 7 KL hex (508)

29 Extension ( 600 mm) KL This tool is essential when performing work at the gearbox, engine and exhaust system. KL Drive: 1/2" to 3/8" : 600 mm Breaker Bar 1/2", ( 620 mm) KL Extra long version with 180 joint. Useable for extremely stubborn fastenings. KL Total lengh: 620 mm Drive: 1/2" Hinged Head KL Spare part for breaker bar KL KL Plastic storage case KL Universal plastic storage case with a foam insert. KL Dimensions: Outer Inner 275x230x83 mm (WxHxD) 261x175x77 mm (WxHxD) Plastic Storage Case KL Universal plastic storage case with a foam insert. Outer Inner 340x275x83 mm (WxHxD) 326x222x77 mm (WxHxD) Plastic storage case KL Universal plastic storage case with a foam insert. Dimensions: Outer Inner 450x360x106 mm (WxHxD)Inner 437x295x100 mm (WxHxD) (509) 10-29

30 KL Workshop Trolley (without spring compressor) KL The sturdy workshop trolley KL can be used in conjunction with the stationary spring compressor KL-5501 and the wheel bearing/silentbloc tools of the KL-0039-Series, thus providing you with a professional and mobile workplace for accurate and quick chassis or axle repairs. The large and sturdy Mulitplex worktop made of solid beech offers the ideal working surface. The convenient push handle and the robust smooth-running wheels with double brakes allow for easy and smooth mobility of the trolley. The 4 drawers feature an individual locking mechanism as well as a central lock designed to prevent unintentional opening of the drawers. Dimensions: Worktop: Drawer (1x): Drawer (2x): Drawer (4x): Castor with brake (2x): Fixed roller (2x): W 1200 x H 900 x D 600 mm W 1200 x H 25 x D 600 mm W 1000 x H 100 mm W 1000 x H 150 mm W 1000 x H 200 mm Ø 125 mm Ø 125 mm 125 kg Note: For additional accessories for this workshop trolley such as the storage system of the KL-0039 Series, please refer to chapter 10 in the KLANN main catalogue. KL Foam Insert for Drive Parts KL Intended for the storage of drive parts such as pull or pressure spindles etc. The storage system KL allows a clear and easy way of working with the wheel bearing / silentbloc tools of the KL Series. The foam insert KL fits the workshop trolley KL or the powder-coated steel plate storage container KL KL Storage Container for Drive Parts KL Intended for the storage of drive parts such as the pull or pressure spindles of the KL Series. The storage system KL allows a clear and easy way of working with the wheel bearing / silentbloc tools of the KL Series. The powder-coated steel plate storage container with foam insert is designed to fit the workshop trolley KL however, can also easily be stored in existing shelving systems (510)

31 Foam Insert for Wheel Bearing Tool Fits the parts of the KL wheel bearing tool series. The storage system KL allows a clear and easy way of working with the wheel bearing / silentbloc tools of the KL Series The foam insert KL fits the workshop trolley KL or the powder-coated steel plate storage container KL KL KL Storage Container for Wheel Bearing Tool Fits the parts of the KL wheel bearing tool series. The storage containerkl allows a clear and easy way of working with the wheel bearing tools of the KL Series The powder-coated steel plate storage container with foam insert is designed to fit the workshop trolley KL however, can also easily be stored in existing shelving systems. KL KL Foam Insert for Press-/Support Sleeves Designed to fit the short and long press-/support sleeves of the KL Series. The storage system KL allows a clear and easy way of working with the silentbloc tools of the KL Series. The foam insert KL has been designed to fit the workshop trolley KL as well as the powdercoated steel plate storage container KL KL KL Storage Container for Press-/Support Sleeves Designed to fit the short and long press-/support sleeves of the KL Series. The storage container KL allows a clear and easy way of working with the silentbloc tools of the KL Series. The powder-coated steel plate storage container with foam insert has been designed to fit the workshop trolley KL however, can also easily be stored in existing shelving systems. KL KL (511) 10-31