EUROPEAN QUALITY TOOLS
|
|
- Lambert Alexander
- 5 years ago
- Views:
Transcription
1 EUROPEAN QUALITY TOOLS THE TOOL INNOVATOR AIR SAW WITH GEAR TRANSMISSION MUELLER thanks to gear transmission increased performance 24 and 32 tpi in packs of 20 pcs $ MAGNETIC WHEEL CAP REMOVAL AND STORAGE TOOL MUELLER /M 05/M plastic protection caps on wheel nuts up to 20 wheel caps in the handle caps on e.g. Opel, Audi, Skoda, VW, Seat, etc. for deeply located bolts ECCENTRIC TURN CHUCK, 1/2 DRIVE MUELLER universal use $ CLEVER DESIGN! POWERFUL! $69.50 UNIVERSAL AXLE BAR MUELLER lowered and suspension components safely separated reduced effort thanks to the unique design of the axle bar using leverage erage and body weight be demounted using the axle bar SUSPENSION WEAR INDICATORICA MUELLER be the case when vehicle was moving bar, silent blocks, steering gear, etc. vehicle sides can be checked at the same time GREAT IDEA! TIME SAVER! $ /4 DRIVE TENSIONER FOR SELF-GRIPPING SPRING BAND HOSE CLAMPS MUELLER square drive tool $89.50 $157.50
2 1/2 DRIVE IMPACT WRENCH MUELLER the most powerful impact wrench in its classs (switch can be changed over) 8100 rpms left turn $ POWERFUL! EXTRAORDINARY VALUE! 28 PIECE UNIVERSAL PRESS AND PULL SLEEVE KIT, MM MUELLER hydraulic bearings, bearing bushes, ball bearings, shaft seals, rubber bearings, etc with or without workshop press inner diameter (in 2 mm increments) use on car) and other sizes sleeves and spindles available separately 1/2 DRIVE MINI IMPACT WRENCH MUELLER (switch can be changed over) POWERFUL! EXTRAORDINARY VALUE! 3/4 DRIVE IMPACT WRENCH MUELLER Nm tightening torque and direction user (switch can be changed over) $ POWERFUL! 146mm 174mm $ piece Joint Brake Line Wrench Kit, 14, 17 and 19 mm UNIVERSAL PRESS SUPPORT MUELLER $ GREAT IDEA! $ TIME SAVER!
3 QUALITY TOOLS FROM GERMANY 17 PIECE 3/8 DRIVE SOCKET SET IN SMART CASE HAZET 880/17 access to tools interchangeable with other tool sets in foam reversible ratchet $ GREAT DESIGN! 6 PIECE TORX SCREWDRIVER RIVER SET HAZET 810TSPC/6 for superior grip $59.50 NEW GRIP! 7 PIECE RATCHETING COMBINATION WRENCH SET, 8-19 MM HAZET 606/7 SPC continues working reversible ratchet 24, 27, 30 and 32 mm available separately at promotional pricing $ GREAT VALUE! NEW SET! : HAZET PEN! TORQUE WRENCH change of torque value setting HAZET CT $ HAZET CT $ HAZET CT $ GREAT QUALITY! 6 PIECE 1/2 DRIVE IN-HEX SCREWDRIVER R SOCKET SET WITH BALL END, IN PLASTIC TRAY HAZET 986KK-P/6 areas with restricted access (e.g. engine compartment) blade length 102 mm, overall length 140 mm m for replacements $ PIECE COMBINED DRILLING/TAPPING BIT SET, HSS, M3 - M10 HAZET 842B/7 hardness only holder for quick change in drill Limited stock - only available while stocks last $ GREAT IDEA!
4 6 PIECE 3/8 DRIVE GLOW PLUG SOCKET SET WITH FLEXIBLE JOINT VIGOR V2737 plastic case $99.50 PAIR OF GLOVES HAZET $13.50 PAIR OF GLOVES HAZET with excellent mechanical protection $10.00 BEST SELLER! EUROPEAN STYLE MACHINIST HAMMER, 500 G VIGOR V2662 $29.50 GERMAN SPECIALIST PULLER MANUFACTURER 3 ARM PULLER FOR OUTSIDE PULLING KUKKO 12-2 excellent gripping for removal of particularly stubborn ball bearings, gears, pulleys, etc. prevents arms from slipping off for replacements GREAT QUALITY! 4 PIECE PICK AND HOOK SET, IN PLASTIC CASE KUKKO 177-HP04 and industry case with foam $55.50 $ BALL-JOINT EXTRACTORS KUKKO $ Chrysler, Nissan, Opel, Toyota, VW, Volvo, Renault, Rover, etc. KUKKO A $ space such as Audi A6 and A8 (1999), 9) KUKKO B-1 $209.00
5 COMPETENCE IN PRECISION & QUALITY 19 PIECE TWIST DRILL SET, HSS, 1-10 MM, IN 0.5 MM INCREMENTS RUKO RO alloys, brass and bronze (not suitable for hardened or stainless steel) $63.00 MINI DIE GRINDER RUKO L $ PIECE SET TUNGSTEN CARBIDE BURRS IN MINI-BOX RUKO burrs with cross toothing capacity than simple toothing which is resistant steels, diecast and plastics s GREAT QUALITY! TUBE DEBURRER WITH HSS CUTTING EDGES RUKO tube deburring $17.00 $ PIECE TAPER AND DEBURRING COUNTERSINKER SET, 90 º, HSS RUKO RO in a better and sharper cutting edge without burrs and countersinking not exceeding 10 mm) $ GREAT SET! 6 PIECE FLAT HSS COUNTERSINKER SET, FOR THROUGH HOLES, MEDIUM GRADE RUKO RO low speeds GREAT SET! 7 PIECE MASONRY DRILL SET, WITH CARBIDE CUTTING EDGE, IN STEEL CASE RUKO tenacious, high resiliency and drilling capacity masonry, tiles and marble, with light hammer drill or strong impact drilling machine $78.00 $178.00
6 THE BRUSH COMPANY FROM GERMANY CONICAL SLEEVE BRUSHES WITH STEEL WIRE, WITHOUT THREAD harder materials (higher loads), cut to a conical point e.g. after galvanisation head length LES $ LES $ LES $ LES $16.50 LES $16.50 LES $16.50 LES $17.50 LES $19.00 UNIVERSAL WIRE BRUSH, BRASS LES mm $11.50 BRAKE CALIPER BRUSH, BRASS, S, WITH 2 COMPONENT HANDLE LES scratch area 90 x 22 mm $13.50 KNOTTED WHEEL BRUSH, 75 MM X 12 MM WITH 6 MM SHANK LES brushing like rust deburring, roughening, ng, etc. 1 row, 18 knots $14.50 KNOTTED END BRUSH 29 MM, STEEL WIRE, WITH 6 MM SHANK LES drilled holes and recesses of all kinds since the brush opens up when it is running $8.50 $26.50 RIVET BRUSH, STEEL WIRE, 3 X 15 ROWS, 190 X 35 MM LES slag and scale from normally hard to reach welds WHEEL BRUSH, STEEL WIRE or polishing easy mounting on all popular grinding machines LES $33.50 LES $49.00 also available in other dimensions RATCHETING T-HANDLE FOR 1/4 DRIVE BITS PB 255.MR-80 $91.00 GREAT PRODUCT! All prices include GST in Australia, exclude GST and freight when soldinnz NZ, and arevalid to 31 Aug 13 (after that only as long as stocks last and without any bonus item)
7 SWISS QUALITY TOOLS SINCE PIECE SHORT TORX L-WRENCH SET PB 410.H 6-25 $ PIECE LONG TORX L-WRENCH SET WITH 100º ANGLE AND EXTRA SHORT KEY PART PB 2411.H 6-25 $87.00 GREAT IDEA! 1/4 DR SCREWDRIVER BIT HANDLE WITH 8 BITS STORED IN HANDLE PB 6460.RED $49.50 PB 6461.RED $ PIECE LONG, METRIC HEX KEY SET WITH BALL END AND RING ON BALL PB 212.LR H-10 screw to access recessed screw heads $ PIECE LONG, IMPERIAL HEX KEY SET WITHOUT BALL END PB 214Z.H-12 quality control $69.00 BIT BOX WITH 30 BITS, 1/4 DRIVE AND MAGNETIC BIT HOLDER FOR QUICK CHANGE PB C6.990 corrosion protection box as well as bit holder with magnet and retaining ring for quick change in drill $ PIECE SMALL PIN PUNCH SET IN ROLL POUCH PB 715.SP $54.50 T-HANDLE LONG HEX KEY, WITH SLEEVE EVE ON BLADE FOR FAST SPINNING hex key spinned fast with other hand PB 207.LT $21.00 PB 207.LT $24.00 PB 207.LT $26.50 PB 207.LT $31.50 PB 207.LT $37.00 PB 207.LT $45.50
8 tradition - MADe in GerMAnY lower P r ic e s d to s tr o n u e g A$ PAnel BeAtinG DollieS high grade tool steel, blue lacquered, faces ground or milled elo 1626 elo 1627 elo 1629 elo 1625 elo 1630 $69.50 Fender Dolly 120 x 56 x 21 mm Dome Dolly 125 x 85 x 55 x 43 x 33 mm $ elo 1635 elo 1636 $65.50 $67.00 Diabolo Dolly 60 x 56 (dia) x 56 (dia) mm Round Dolly 130 x 48 x 58 (dia) mm Curved Dolly 145 x 52 mm Heel Dolly 80 x 60 x 35 mm $63.50 $68.50 $73.00 elo 1637 elo 1638 elo 1639 $62.00 $85.00 Wedge Dolly 118 x 42 mm $29.00 Wedge Dolly 135 x 48 x 46 x 26 mm Toe Dolly 105 x 66 mm Grid Dolly 125 x 55 x 25 mm SPeCiAl AUtoMotive tools FroM GerMAnY 4 PieCe 1/2 Drive 288 MM long in-hex SCreWDriver SoCKet Set, With BAll end Kl complete set incl. all sizes listed below All sizes also available individually (see below) $ extra long! Kl mm $33.50 Kl mm $34.50 Kl mm $37.50 Kl mm lower P r ic e s d to s tr o n u e g A$ 4 PieCe CirCliP Plier Set nws P-4 CSP for internal and external circlips mm in diameter anti-slip, turned precision tips with 1.8 mm diameter made in Germany includes 1 straight and 1 bent (90 º) for external and 1 straight and 1 bent (90 º) plier for internal circlips all pliers also available individually for replacements $ handy! $40.00 This brochure is published by OzSwiss European Tools, ABN , Tel , Fax , Web All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude NZ GST and freight when sold in NZ. Prices are valid till 31 Aug 13 (after that only as long as stocks last and without any bonus item). AUtoMotive WrenCh, 370 MM nws OzSwiss European Tools will do all things necessary to maintain stocks of products advertised but cannot be made responsible for the unavailability of such products as a consequence of the failure of suppliers to deliver at all or on time or through any other circumstances beyond the control of OzSwiss European Tools. E. & O.E., copyright with OzSwiss European Tools. Reproduction in whole or part is prohibited without written prior approval. AVAILABLE FROM: heavy-duty, drop-forged jaw opening up to 82 mm 370 mm / 14.1/2 overall length, 47 mm jaw length :: info@metapol.com.au $ Metapol - P.O. Box 870 Padstow NSW Australia ABN Ph Fax Mobile
SPECIALS I I / 2018 EUROPEAN QUALITY TOOLS $ $ $ $ $ $27.00 $27.00 $27.00 HAZET HAZET HAZET
SPECIALS I I / 2018 EUROPEAN QUALITY TOOLS LIMITED STOCK! 1/2 DRIVE REVERSIBLE FINE-TOOTH, HIGH-PERFORMANCE RATCHET HAZET 916HP WATCH VIDEO newly designed ratchet with only 4 º angle (90 teeth) instead
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationCombination Pliers. Pliers. Long Nose Pliers, straight. Bent Nose Pliers, 200 mm. Flat Nose Pliers, 160 mm 2013/2014
Combination Pliers - satin nickel plated - with slip guard/ soft grip handles - red/black 325 Combination Pliers, Length 165 mm 326 Combination Pliers, Length 175 mm 327 Combination Pliers, Length 200
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationTOOLS THAT MEASURE UP!
TOOLS THAT MEASURE UP! 0-6 Inch Outside Micrometer Set Graduation: 0.0001 Carbide tips Micrometers over 1 /25mm are supplied with a setting standard Supplied in fitted storage case 0-12 set shown Range
More informationDrive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33
Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:
More informationKIT DAD OUT FOR THE SEASON
ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More information2015 Q1 Lifetime W NEW PRODUCTS arranty
NE 2 W 01 PR 5 Q OD 1 UC TS Lifetime Warranty aster Tool Set & Tool Storge 09015 09523E 09902E 15PC. 3/DR. SOCKET SET (ETRIC) 14PC. 3/DR. SOCKET SET (ETRIC) 2 PC. 3/DR. EXTRA LONG EXTENSION SET 12991E
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationEVOLVE TOOL CHEST 7 DRAWER
ALL PRICES INCLUDE GST OFFER VALID UNTIL 31/10/2015 Offer available in Australia only. APPRENTICES ONLY! 999 00 214 PCE EVOLVE TOOL KIT Part No. P1400 EVOLVE TOOL CHEST 7 DRAWER 666 x 410 x 475mm 93 Piece
More informationAudi > C5 > Suspension, Wheels, Steering 40 - Drive shafts with tripod joint AAR 3300 i, servicing
Page 1 of 10 Audi > C5 > 1998-2005 Suspension, Wheels, Steering 40 - Drive shafts with tripod joint AAR 3300 i, servicing Tripod joint AAR 3300 i, disassembling and assembling Special tools, testers and
More informationMaintenance. Equipment for general applications in the work place
Equipment for general applications in the work place 184 Pipe Wrenches Heavy Duty Forged steel jaw provides maximum strength. Full floating hook jaw, provides instant grip, easy release. Large knurl and
More informationGeneral Repairs (497) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1
General Repairs Allgemeine General Repairs Werkzeuge Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 8.E1 (497) 10-01 KL-0126-2 Flexible Magnetic Lifter (retractable) KL-0126-2 PM Magnetic Lifter with
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationScrewdrivers Nut Drivers Hex Keys Bit Holders and Bits
Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits SCREWDRIVER SETS SET NO. 88819 19 PC. COMBINATION SCREWDRIVER SET 88203 Cabinet Tip 3" 88204 Cabinet Tip 4" 88208 Cabinet Tip 8" 88214 Cabinet Tip
More information1/4", 3/8", 1/2" Drive Sockets
TECHNICAL EDUCATION SETS 1/4" Drive Sockets 80302 13 Pc. Metric 6 Pt. Socket Set 80125 4mm 80132 10mm 80126 5mm 80133 11mm 80127 5.5mm 80134 12mm 80128 6mm 8 0135 13mm 80129 7mm 80136 14mm 80130 8mm 80137
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationNEW! Tool Trays for Roller Cabinets and Top Chests
NEW! Tool Trays for Roller Cabinets and Top Chests Tool Sets with Foam Organizers for Wide Drawers D096001-FT1T 1/4 Dr., 3/8 Dr. & 1/2 Dr. Sockets & Attachments 2, 4 & 6 1/4 Dr. Extensions, 1/4 Dr. Hand
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationPROVEN WORLDWIDE SNORKEL FOR CHEVY COLORADO NEW PRODUCT
AEV30272AC Last Updated: 10/09/18 PROVEN WORLDWIDE SNORKEL FOR CHEVY COLORADO NEW PRODUCT Please visit www.aev-conversions.com to view the most current installation guide for this product. This is a new
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationChoosing the right puller for the job. Types of Puller
Pullers Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationWe are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc.
We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc. These are highly appreciated for optimum quality, corrosion
More informationAddendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit
Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit PN: L250150309 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761
More informationQuickbits -Adaptors -Drills -Countersinks -Drill Countersinks
QUICKBITS Quickbits -Adaptors -Drills -Countersinks -Drill Countersinks Quickbits Quickbits Index 74 Quickbits Adaptors & Extensions 76 Quickbits Adaptors Socket 74 Quickbits Chuck Mini 84 Quickbits Countersinks
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationFront axle components, overview
j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or
More informationFREE EVOLVE CHEST KIT 214 PIECE METRIC & IMPERIAL PART NO P1400. GST INCLUSIVE OFFER VALID UNTIL 29/02/2016 Offer available in Australia only.
GST INCLUSIVE OFFER VALID UNTIL 29/02/2016 Offer available in Australia only. EVOLVE CHEST KIT 214 PIECE & PART NO P1400 EVOLVE TOOL CHEST 7 DRAWER 666 X 410 X 475MM 93 Piece Mirror Polish Sockets & Accessories,
More informationTwist-a-Nut Screwdrivers
Twist-a-Nut Screwdrivers n Top quality screwdrivers designed especially for the professional electrician n Patented wire connector wrench in handle helps install twist-on connectors n Patent pending Accu-Loop
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationTools and Techniques
Chapter Two Tools and Techniques This chapter describes the common tools required for marine engine repair and troubleshooting. Techniques that make the work easier and more effective are also described.
More informationOffer expires: January 31, Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS
Offer expires: January 31, 2012 Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS NEW PRODUCTS $159.95 $104.99 *To Order Use Part# D010102-SPL Limited Time Offer: Buy An 8 Piece Stubby Ratcheting
More informationCLASS # 39 VIPER 15-IN-1 SCREWDRIVER
VIPER 15-IN-1 SCREWDRIVER The Viper 15-in-1 Screwdriver has industrial-grade torx, square, hex, slotted and phillips screwdriver bit sizes combined into one tool and features an EZ Guide collar, retractable
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationAkron (800) Bentleyville (800) Erie (800) Meadville (800) Warren (800) Youngstown (800)
Stock and Pricing as of DECEMBER 1st - Applies to Current Stock Available* Circular Saw Blade 3-Pc. Step Drill Set 7-1/4 Carbon Tipped Precision honed C3 carbide tips; 40 TPI Heat/vent expansion slot design
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationFMT 250; FMT 250Q; FMT 250QSL. Repair instructions FMT 250Q / FMT 250QSL. Page 1 of 30
Repair instructions FMT 250 FMT 250Q / FMT 250QSL Page 1 of 30 Contents 1. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationEMM International B.V. has created the information with the utmost care. Nevertheless, EMM International B.V. cannot
P R I C E L I S T 2 0 1 3 Disclaimer EMM International B.V. EMM International B.V. has created the information with the utmost care. Nevertheless, EMM International B.V. cannot be held responsible for
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationWire Rope Cutter NEW!
SPECIALS 2018 Spend $300 or more* and receive a FREE Limited Edition KNIPEX Cobra in a collectable metal tin! EDITION. LIMITED EDITION. LIMITED EDITION. LIMITED First 200 entries only! Wire Rope Cutter
More informationCutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
More informationProduct # Drive Size (in) Overall Length (in) /4 5-3/ /4 6-1/ /8 7-11/ / /2 9-3/ /2 10-1/4
STANLEY Pear Head Quick Release Ratchets Pear head design for strength, durability, and performance. Quick-release mechanism to lock sockets onto the drive during operation and allow easy changeover. Reversible
More informationTwist-a-Nut Screwdrivers
Twist-a-Nut Screwdrivers n Top quality screwdrivers designed especially for the professional electrician n Patented wire connector wrench in handle eases installation of twist-on connectors n Patent pending
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL
More informationGeneral Repairs General Repairs
General Repairs (481) 10-01 KL-0126-2 Flexible Magnetic Lifter (retractable) KL-0126-2 PM Magnetic Lifter with flexible Shaft. The lifting magnet is located within an anti-magnetic sleeve. This allows
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationINSTALLATION GUIDE TOYOTA 4 RUNNER (2013+) REAR BUMPER
INSTALLATION GUIDE TOYOTA 4 RUNNER (2013+) REAR BUMPER CONTENTS CONTENTS Rear Bumper (base or dual arm) Installation...................................... 2 Dual Swing Installation..........................................................
More informationAir Cooled Engine Technology. Roth 9 th Ch 2 Tools & Measuring Pages 21 43
Roth 9 th Ch 2 Tools & Measuring Pages 21 43 1. A combination wrench has one end and one end. Box & Open Square & Round Ratcheting & Gear 2. A or flare nut wrench is used on metal tubing connection fittings.
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationNEW. 79 $90.85 incl GST. 119 $ incl GST SP LED Magbase Work Light Ultra bright 30 LED 1200LUX 5 LED spot lights 200LUX SP81455
Specials Available 1st November 2012 To 28th February 2013 SP Open Mouth Bag Moulded waterproof base SP40360 79 90.85 incl GST LED Magbase Work Light Ultra bright 30 LED 1200LUX 5 LED spot lights 200LUX
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationCatalog Drilling & Tapping Consumables
Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationISSUE 25. $72.00 $82.80 incl GST. $68.00 $78.20 incl GST GAAE0307. $ $ incl GST KAAQ1650. Only 97mm wide
ISSUE 25 FEB - APRIL 208 www.toptul.net.nz Valid until April 0 208 /4 Drive Socket & Bit Set 4 Piece Industrial Grade /4 Drive 6pt 4-4mm Satin Chrome Finish /4 Hex Bits Flat, Phillips, Pozi, Hex, Tamperproof
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationPUSH IN MANUAL DRAWER RETENTION DUAL GLOSS & STABILISED POWDER COAT FREE EVOLVE TROLLEY 6 DRAWER PART NO TFL-P1408 VALUED AT
WHAT EVOLVE BOXES OFFER... The EVOLVE Tool Box and Tool Kit range offers a high quality product at a great value price for the tradesman, apprentice or home handyman and includes features and styling normally
More informationIntroduction To Automotive Technology
Introduction To Automotive Technology UNIT 4: BASIc hand Tools LESSON 2: TYPES OF SCREWDRIVERS AND PLIERS I. Screwdrivers A. The standard screwdriver has a straight blade for turning screws with a slot
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationWorkshop Solutions PULLERS & SEPARATORS.
Workshop Solutions PULLERS & SEPARATORS Churchbridge Works - Walsall Road, Cannock, Staffordshire, UK. WS11 8JR Tel: +44 (0) 1922 702222 Fax: +44 (0) 1922 702223 E-mail: sales@sykes-pickavant.com SP07/01-PULLER
More information