SPECIALS I I / 2018 EUROPEAN QUALITY TOOLS $ $ $ $ $ $27.00 $27.00 $27.00 HAZET HAZET HAZET

Transcription

1 SPECIALS I I / 2018 EUROPEAN QUALITY TOOLS LIMITED STOCK! 1/2 DRIVE REVERSIBLE FINE-TOOTH, HIGH-PERFORMANCE RATCHET HAZET 916HP WATCH VIDEO newly designed ratchet with only 4 º angle (90 teeth) instead of usual 5 º, enables better use in even the tightest of spaces extremely high rating of 1000 Nm (compared to usual 512 Nm) allows usage like a normal (non fine tooth) ratchet for everyday applications extended service life thanks to design and usage of state-of-the-art lubricants special heat treatment for high-strength teeth and extremely sturdy square engaging function of the lever protects against unwanted switching same dimensions as standard 1/2 drive ratchet (275 mm long, 595 g) design and strict production tolerances protect against outside dirt entering the ratchet mechanism 2 component, non-twist handle, insensitive to break fluid DOT 4 integrated suspension option in handle, also protects handle material from sliding off handle repair kits available MUST HAVE! NEW PRODUCT! 4 slotted (between 0.5x3.0 and 1.2x6.5 mm) and 2 Phillips screwdrivers (PH #1 and #2) 9 long hex keys with ball end mm hex key holder with 150 Year HAZET Anniversary logo screwdrivers with 2 component grip with hanging hole 15 PIECE SCREWDRIVER AND HEX KEY SET 150 YEAR HAZET ANNIVERSARY HAZET 810/2 6 PC 150 YEAR HAZET ANNIVERSARY COMBINATION WRENCH SET HAZET 600N/6-150 long, slim design, slim heads shank with extra sturdy HAZET double T-profile box-end 15 º offset wrenches chrome-plated, heads polished size 13 mm additionally gold-plated and embossed with sizes included 8, 10, 12, 13, 17 and 19 mm - further sizes available outside promotion $ $ $ HAZET HAZET HAZET NEW SIZE 1/2 DRIVE WHEEL BEARING HOUSING SPREADING TOOL for expanding the spring strut and ball joint mounting (separating the spring strut from the wheel bearing housing) drive with ball race tip 5.5 x 8 mm for VW Fox >05, Polo >02, New Beetle, Golf 98-04, Tiguan >08, EOS >06, Passat >06, Touran >03, Caddy >04, T5 >04; Audi A2 >01, A3 >04, A , A5 >08, A6 >08 TT >07 tip 5 x 7 mm for Renault, Peugeot, Citroen tip 6 x 8 mm for BMW, Mini TYRE INFLATOR WITH DIGITAL DISPLAY HAZET 9041D-1 for filling and checking the air pressure of tyres special rubber protects manometer from light impacts manometer can be turned for optimal reading blue lighting of digital display for easy reading, also in poor light handle with operating lever for filling as well as deflating button for use with one hand handle with integrated suspension hook display can be switched between bar, PSI and KG/cm² measuring range 0-12 bar / psi, graduation 0.01 bar / psi with 400 mm long flexible hose with plug-in nibble $27.00 $27.00 $ /2 DRIVE EXTENDABLE, REVERSIBLE RATCHET, 600 NM HAZET 916LG continuously extendable handle from 410 to 590 mm (avoid sharp pulling when extending), easy fixation with knurled ring long lever arm providing extra force - max torque allowed 600 Nm reversible ratchet, 32 teeth especially suitable for commercial vehicles, agricultural machines and industrial applications repair kit available $ $338.50

2 HAZET 9012MT 1/2 DRIVE MINI IMPACT WRENCH SHORT AND EXTRA-POWERFUL NM UNDOING TORQUE new version with twin hammer and up to 1400 Nm loosening torque (depending on air set-up) head only 120 mm long (100 mm without anvil) very powerful and at the same time also extremely compact for working in areas with restricted access (wheel housing, etc.) 120mm one hand switch for speed and direction suitable for left and right hand users (switch can be changed over) net weight only 1.32 kg air consumption 135 l / m noise level 92.7 db (A), vibration 8.74 m/s² 100 ML SPECIAL OIL FOR AIR TOOLS (MADE IN GERMANY) 4 PC EXTRA-SHORT 1/2 DR IMPACT SOCKETS 13, 17, 19, 21 MM GREAT PRODUCT! $ /2 DR IMPACT SOCKET 17 MM WITH SPECIAL PROFILE FOR MERCEDES-BENZ LIGHT ALLOY RIMS HAZET 905SLG-17 especially for hybrid wheel bolts in light alloy rims of new Mercedes-Benz vehicles with plastic insert to protect the surface of the wheel bolts with outside plastic sleeve (rotatable) to protect rims optimised contour for use on deep rim holes on e.g. MB Class C type 204, 204 X; class E type 211, 212, 207; SLK type 172; class M type 164, 166; class S type 221, 222; class CL type 216 MUST HAVE! NEW VERSION! KNEELING MAT HAZET to protect knees when working in a kneeling position easy to clean surface 450 x 210 x 30 mm with carry / suspension cut-out LIMITED STOCK! MUST HAVE! BESTSELLER! EXTREMELY POWERFUL AND COMPACT! $46.50 HANDY! $45.00 to extract broken and worn-out screws M3 to M18 square for operation with a wrench includes sizes 1 (M3-M6), 2 (M6-M8), 3 (M8-M11), 4 (M11-14) and 5 (M14-M18) all sizes available individually quick blade changing comfortable handle made out of impact resistant ABS magazine for blades with safety lock thumb protection supplied with 4 spare blades ideal for inserting and removing O-rings, seals or removing the protection caps on wheel bolts 2 component grip with hanging hole blades with straight point, 90 º point, hook point and piercing awl 5 PIECE SCREW EXTRACTOR SET HAZET 840/5 $ YEAR HAZET ANNIVERSARY T-SHIRT (LIMITED EDITION) HAZET CL4555-M / -L / -XL / -XXL JACK KNIFE WITH 5 BLADES HAZET PIECE MINI HOOK SET VIGOR V4663 dark blue colour, with imprint / 150 JAHRE ZUKUNFT and HAZET logo available in sizes M, L, XL, XXL - specify required size when ordering COOL! $38.50 $67.00 $29.00

3 extendable from mm with strong magnet at front, capacity 1.6 kg with pocket clip for damage-free release of electrical plugs and connectors as found in ABS, a/c sensors, radio, PDC, trailer coupling modules etc. for fast trouble-shooting of connection defects due to e.g. corrosion suitable for round and flat connectors for almost all vehicles such as BMW, MERCEDES, VW/AUDI, SKODA, SEAT, PORSCHE, FORD, JAGUAR, TOYOTA, HONDA, MITSUBISHI, etc. individual tools available separately MAGNETIC, TELESCOPIC PICK-UP TOOL VIGOR V PIECE COMPREHENSIVE CABLE RELEASE TOOL SET VIGOR V4451 MUST HAVE FOR AUTO ELECTRICIANS! facilitates removal of rusted circlips located on the inside of wheel bearings maximum force and fast removal due to adjusting screw with recess for a 1/4 dr ratchet suitable for passenger cars and trucks unique design ensures the right angle of the pins, regardless of the size of the circlip very easy pin changing includes pair of pins in 2.5, 3 and 3.5 mm pins available separately made in Sweden LIMITED STOCK! GREAT PRODUCT! $24.00 $ $ $ combines inspection light, work light and flashlight into an ultra-thin and compact light light tube only 9 mm dia, suitable to illuminate the most inaccessible and narrow work areas - perfect for demanding and difficult inspection jobs 100 % foldable body - fold down when using as a traditional hand-held work light or flashlight and fold out when using as an inspection light strong built-in magnet at bottom of light and hook for flexible positioning up to 5 hours operating time on low setting - 3 hours recharging time lumen COB LED 3.7 V / 1200 mah Li-Ion battery only 101 g in weight supplied with 240 V charger and 1 m USB cable (only use original charger - don t deplete completely before recharging to avoid battery failure) COMPACT, RECHARGEABLE 3 IN 1 LED INSPECTION LIGHT HELLA MINI SLIM CIRCLIP TOOL FOR WHEEL BEARINGS - 44 PC UNIVERSAL PRESS AND 2.5, 3 AND 3.5 MM TIPS PULL SLEEVE KIT, MM VIGOR V2867 MUELLER universal tool set for the extraction and installation of silent bearings, hydraulic bearings, bearing bushings, ball bearings, shaft seals, rubber bearings, etc., with or without workshop press universally suitable for mainly SUV, vans and commercial vehicles (full step-up kit from MUELLER kit) sleeves are not hardened (only step discs are) and thus can be modified with e.g. file to individual requirements set includes: - 20 sleeves (74 to 112 mm inside diameter in 2 mm increments, i.e. 74, 76, 78 mm, etc.) - 4 step discs to match sleeve sizes - 1 spindle TR20 short and 1 long with inside adapter thread M10, M12 and M14-2 nuts TR20 with bearing - spindles and nuts M10, M12, M14 and M16 with bearing - counter nuts M10, M12 and M14 - spindle grease all items also available individually NEW PRODUCT! $

4 basic step-up kit for workshops that already have Mueller press and pull sleeve kit and only want the most important sizes from the kit (as shown on previous page) universally suitable for mainly SUV, vans and commercial vehicles includes: - 8 sleeves in sizes 82/92, 84/94, 86/96, 88/98, 98/108, 100/110, 102/112, 104/114 mm (inside/outside dia) - 4 step discs matching above sleeves - 3 counter nuts M10, M12 and M14-2 spindles TR20 (1 short, 1 long) with inside thread M10, M12, M14-2 nuts TR20 with bearing An optional upgrade kit /Upgrade is also available with the additional parts to upgrade from the /Basic to the full kit extremely powerful and reliable impact wrench up to 2600 Nm loosening and 2000 Nm tightening torque (depending on air set-up) 3.2 kg, db noise level one hand switch for speed and direction suitable for left and right hand user (switch can be changed over) 215 mm long, 3/8 inlet thread, l / min air consumption 6400 rpms left turn, 5300 rpms right turn new series insulated VDE screwdrivers with super slim blade to reach deeply seated screws and spring elements first third of the blade (from tip) is extra thin and insulation on blade is recessed in order not to protrude from blade two-component softgrip handle SwissGrip in classic (narrow) style as known from standard VDE screwdrivers from PB Swiss Tools set includes 4 slotted (0.6x3.5x100, 0.8x4.0x100, 1x5.5x125, 1.2x6.5x150 mm) and 2 Phillips screwdrivers (PH1-80 mm long and PH mm long) coloured symbol for tip type at the end of the handle for easy identification in tool bag or rack 19 PC UNIVERSAL PRESS AND PULL SLEEVE KIT, MM MUELLER /BASIC 3/4 DRIVE POWERFUL IMPACT WRENCH MUELLER PB 5542.SL CN 6 PC INSULATED VDE SCREWDRIVER SET WITH EXTRA-SLIM BLADE WITH RECESSED INSULATION $ $ NEW PRODUCT! $ PB 8263.CBB 5 PIECE SCREWDRIVER SET WITH SOFT GRIP HANDLE IN DISPLAY / GIFT BOX bestselling PB Swiss Tools screwdrivers in an attractive display / gift box two component soft grip handle SwissGrip and each tool with serial number for total quality control handles coded with colour and symbol for easy tip identification includes 3 slotted (0.5x3.5x90, 0.6x4x100, 0.8x5.5x120 mm) and 2 Phillips (PH1, 80 mm long and PH2, 100 mm long) screwdrivers LIMITED EDITION! all drivers also GREAT GIFT! available individually NEW SET! PB 8260.SP 10 PIECE UNIVERSAL SCREWDRIVER SET WITH SOFT GRIP HANDLE universal set with 5 slotted screwdrivers normal length and 1 stubby, 2 Phillips normal length and 2 stubbies all handles with two-component soft grip SwissGrip handles coded with colour and symbol for easy tip identification all drivers also available individually PB 8453.R-30 PB CU GREAT PRICE! $67.00 $ RATCHETING STUBBY BIT DRIVER WITH 6 BITS IN HANDLE stubby soft grip bit driver Insider with integrated ratchet with 3 positions (left, right, lock) 30 mm blade with strong magnet in front to hold bits securely integrated pull-out compartment at the back with 6 precision 1/4 hex bits 25 mm (slotted 0.8x5.5 mm, Phillips #1 and #2, Torx T15, T20, T25) all bits also available individually NEW PRODUCT! DEAD-BLOW MALLET WITH REPLACEABLE 40 MM DIA COPPER HEADS mallet with weights in the head to cushion the recoil allows full and precise strikes and careful blows during assembly work with flat copper head (exchangeable) on both sides - new version hickory handle for long service life (replaceable) 1340 g total weight, 380 mm overall length serial number engraved on head for total quality control made in Switzerland also available with 24 and 32 mm dia heads and/or with aluminium heads (outside promotion) $ g $155.00

5 12 PIECE COMPACT BIKE TOOL SET small (101 x 36 x 21 mm) and robust tool set for biking enthusiasts fits any pocket, even in biking gear weighs only 98 grams closed set has rounded edges to protect against injuries consists of: - bit holder (impact-proof plastic, resistant to cleaning agents, oil and petrol) - 8 bits for the most common screws on bikes (Torx 25; slotted 0.8 x 5.5 mm; Phillips # 2; hex 2, 2.5, 3, 4, 6 mm) - L wrench - for rapid and powerful tightening and loosening of screws - magnetic bit holder - fits between L wrench and bits - 2 tyre levers (impact-proof plastic, resistant to cleaning agents, oil and petrol) all items also available individually PB 8400.B/4 SP Torx screwdrivers with hole at front for tamperproof Torx screws includes popular sizes T10 (70 mm blade), T15 (80 mm), T20 (100 mm) and T25 (120 mm) 2 component soft grip handle SwissGrip, pleasant to skin all items also available individually NEW SET! smooth ratchet with left turn, right turn and locked (middle) position, easily changeable with one hand with strong magnet at front to hold bits safely in blade two component soft grip handle SwissGrip, pleasant to skin available in two blade lengths (see below) PB 8510.R-30 PB 8510.R mm blade 100 mm blade PB 470.RED CN GREAT GIFT! for powerful tightening/ loosening of screws for rapid tightening/ loosening of screws $ PIECE TAMPERPROOF TORX SCREWDRIVER SET WITH SOFT GRIP HANDLE $69.50 PB TWISTER - RATCHETING BIT DRIVER FOR 1/4 HEX BITS $95.00 $99.50 PB 213Z.H-12 short hex keys, straight end (no ball) perfect dimensional accuracy and hard and though special alloy generate the best hex keys on the market each key marked with serial number for total quality control sizes 1/20, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, supplied in practical clip all hex keys also available individually GREAT QUALITY! PB 212.H-10 RB popular metric hex key set perfect dimensional accuracy and hard and though special alloy generate the best hex keys on the market each key with different powder-coated colour to easily identify its size keys with serial number for quality control ball end for screws that need to be accessed at an angle contains sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm, in plastic holder all keys also available individually 8 PIECE L-WRENCH SET FOR TORX SCREWS, COLOUR-CODED 12 PIECE SHORT HEX KEY SET, STRAIGHT END, IMPERIAL, 1/20-5/16 9 PIECE SHORT HEX KEY SET, MM, WITH BALL POINT, COLOUR-CODED for Torx screws T6, T7, T8, T9, T10, T15, T20 and T25 each size with different colour for easy identification of size keys between 52x15 and 83x22 mm long all keys with serial number for quality control supplied in practical plastic holder GREAT IDEA! PB 8620.CN PB 410.H 6-25 RB 4 PIECE SCREWDRIVER SET FOR ELECTRONICS AND PRECISION WORK, WITH SOFT GRIP HANDLE high quality screwdrivers for electronic and precision mechanical work now with soft grip handle with turnable, coloured end cap includes 2 slotted (0.3x1.8x60, 0.4x2.5x80 mm) and 2 Phillips (PH00 x 60, PH 0 x 80 mm) screwdrivers all items also available individually NEW SET! $38.00 $59.50 $96.50 $89.50

6 PB C6.213Z SP each bit 25 mm long and colour nano-coated for corrosion protection and easy identification of bit type includes sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4 - in plastic holder all bits also available individually 10 PIECE SET 1/4 HEX BITS, 25 MM FOR HEXAGON SCREWS, IMPERIAL $57.00 unique design that allows extraction and insertion of studs with diameter of 6-12 mm with step-less adjustment tool contains 3 segments that can be adjusted by the drive nut (24 mm hex) or the 3/8 internal square drive requires only 3 mm visible length to extract rusted or corroded studs also for bolts with rusted or stripped heads and for screws (with dimensions smaller than specified) can be used with an impact gun can be operated in most confined spaces GREAT TOOL! replacement gripping jaws available (KL ) socket has a joint on the drive side which allows usage with limited access, such as drive shafts on VW Golf IV, Passat 3C, etc. with substantial time savings for hand operation only (non-impact) 130 mm long hard to come by extra-long in-hex sockets with ball-end for difficult to access screws set includes sizes 5, 6, 8 and 10 mm all sizes also available individually (outside promotion) UNIVERSAL STUD EXTRACTOR, FOR 6-12 MM STUDS KL $ /8 DRIVE MULTISPLINE (XZN) SOCKET M10 WITH FLEXIBLE JOINT KL HANDY! $ PIECE SET 1/2 DRIVE EXTRA-LONG (288 MM) SCREWDRIVER SOCKETS FOR HEXAGON SCREWS, WITH BALL-END KL $ suitable for hexagon screws extra-long sockets, straight end (refer lengths below) 1/2 DRIVE EXTRA-LONG SCREWDRIVER SOCKET FOR HEXAGON SCREWS ELO 3210-INL 5X180 5 mm, 180 mm long $25.50 ELO 3210-INL 6X220 6 mm, 220 mm long $28.00 ELO 3210-INL 7X100 7 mm, 100 mm long $25.50 ELO 3210-INL 8X120 8 mm, 120 mm long $25.00 ELO 3210-INL 10X mm, 140 mm long $26.50 ELO 3210-INL 12X mm, 140 mm long $27.00 ELO 3210-INL 14X mm, 140 mm long $33.50 ELO 3210-INL 17X mm, 100 mm long $29.50 ELO 3210-INL 19X mm, 100 mm long $32.00 TWIST DRILL SET, HSS, IN 0.5 MM INCREMENTS standard drills, HSS ground (bright finish) suitable for drilling in all normal materials (excl hardened steel, e.g. stainless) from size 3 mm up with split point, point angle 118 º supplied in practical, light-weight polystyrene box drills also available individually 12 PIECE SET WITH SHORT AIR GRINDER, 10 TUNGSTEN CARBIDE BURRS AND COUPLING RUKO HANDY! RUKO RO 1-10 mm - 19 pieces $79.50 RUKO RO 1-13 mm - 25 pieces $ contains short (157 mm), straight air grinder, 10 piece set tungsten carbide rotary burrs and air coupling - all packed in practical box with foam air grinder with non-slip handle that absorbs vibration, speed adjustment on top of handle and exhaust through the handle towards the back tungsten carbide rotary burrs in 6 and 12 mm for each shape - shape A, cylinder with end toothing; shape C, oval; shape G, tree; shape F, ball nose; shape D, ball type rotary burrs suitable for steel, stainless steel and cast iron all items also available individually NEW SET! $435.50

7 TAP RATCHET WRENCH ideal for thread cutting in difficult to reach spots with two-jaw chuck for tensioning square shanks sliding cross-handle with grooves at both ends ratchet adjustable left turn, right turn, fixed RUKO size 1, for taps M3 - M10 $22.00 RUKO size 2, for taps M5 - M12 $ PIECE STEP DRILL SET, HSS, 4-30 MM RUKO RO made from HSS, bright finish suitable for all standard industrial materials (excl. stainless and other hardened steels) as well as sheet metals up to 4 mm thickness CBN grounding and spiral flute with split point result in very sharp and burr-free cutting edges and quiet running as well as high cutting performance optimized chip flow for easy removal of even long, non-breaking chips includes size 0/9 (4-12 mm, 9 steps, 6 mm shank), size 1 (4-20 mm, 9 steps, 8 mm shank), size 2 (4-30 mm, 14 steps, 10 mm shank) supplied in light-weight polystyrene box all drills also available individually $ SEGMENTED INTERNAL EXTRACTORS WITH EXTRA FINE GRASPING EDGES AND COUNTERSTAYS internal extractors that open up in 2-6 segments, depending on size (refer below) and with extra thin and short grasping edges for bearings and bushings that lay flat on one another available for bearing dia from mm extractors with mechanical pressure screw the design of the extractors allows safe removal of bearings and bushings that can t be gripped from behind extractors can be combined with counterstays as listed below or with sliding hammers 15 PIECE SINGLE CUT TAP SET, HSS, M3-M12 RUKO RO thread can be cut in one operation (i.e. with one tap) by hand or machine for through threads in unalloyed or low-alloyed steels, malleable cast iron and non-ferrous metals (not for stainless steel) includes: - single cut taps in sizes M3, M4, M5, M6, M8, M10, M12-7 twist drills in HSS ground (bright) in corresponding sizes - 1 tap wrench size 1.1/2 (M1 - M12) supplied in lightweight polystyrene case all items also available individually 2 ARM PULLER FOR 5TH GEAR VW / AUDI KUKKO V special profile thin legs with tensioner to keep the arms from spreading apart specifically designed puller for gears on VW / Audi 2007 models (e.g. 5th gear pinions in transmissions 02A) max spread 120 mm, max reach 100 mm replacement legs available separately (in pairs) PROMBLEM SOLVER! $ $ KUKKO 21-0-E Internal Extractor for Bearings 4,8-6,5 mm - 2 segments $ KUKKO E 6,8-9,5 mm - 2 segments $ KUKKO E 9,5-12,5 mm - 2 segments $ KUKKO 21-1-E mm - 3 segments $ KUKKO 21-2-E mm - 3 segments $ KUKKO 21-3-E mm - 3 segments $ KUKKO 21-4-E mm - 4 segments $ KUKKO 21-5-E mm - 4 segments $ KUKKO 21-6-E mm - 4 segments $ KUKKO 21-7-E mm - 4 segments $ KUKKO E mm - 3 segments $ especially suitable for spigot shaft bearings (06B105313D) on clutches of most VW, Audi, Skoda and Seat models (recommended tool by VAG) NEW SIZE! KUKKO 22-1 Counterstay for Internal Extractors 21-0-E to 21-4-E $ KUKKO E to 21-7-E $240.00

8 GERMAN MADE! 5 PIECE SPARK PLUG BRUSH SET - STEEL, 2 X BRASS, POLYAMIDE AND STAINLESS STEEL LES 125 SP set with the most popular spark plug brushes suitable for all fine work requiring thin wire all with beechwood body contains 1 brush each with 3 x 5/6 rows, 150 mm long with steel wire, stainless steel wire, brass and polyamide as well as 1 small brush with 2 x 5 rows, 100 mm long with brass wire GERMAN MADE! GERMAN MADE! $20.50 LES 410/455/430 SP 5 PIECE UNIVERSAL BRUSH SET, CRIMPED STEEL WIRE, WITH 6 MM SHANK set with the most required brushes with 6 mm shank for use with handheld drills contains: - 3 wheel brushes in 50, 75 and 100 mm dia (0.2 mm crimped steel wire, max 4500 rpms) - 1 cup brush 75 mm dia (0.3 crimped steel wire, max 4500 rpms) - 1 end brush 25 mm (0.3 mm crimped steel wire, max 12,000 rpms) all items also available individually $ PIECE CYLINDER BRUSH SET WITH POLYAMIDE BRISTLES LES SP for manual cleaning or deburring of tubes, bores, etc. brushes 300 mm overall and section with bristles 100 mm long brushes with loop includes brush diameters 6, 8, 10, 12 and 14 mm supplied in plastic pouch replacements and additional sizes also available $ PIECE CYLINDER BRUSH SET WITH STEEL BRISTLES LES SP for manual cleaning or deburring of tubes, bores, etc. brushes 300 mm overall and section with bristles 100 mm long brushes with loop includes sizes 6, 8, 10, 12, 13 and 14 mm supplied in plastic pouch replacements and additional sizes also available suitable to test ALL types of batteries (except Lithimum) as well as starter, alternator and grounding mass simple and straight-forward use, guided by symbols in display with PC link, memory and built-in printer (thermal paper, same as credit card machines) to document results no internal battery or power adapter required - draws power from battery or vehicle to be tested supplied in practical storage case designed in Switzerland This brochure is published by OzSwiss European Tools, ABN , Tel , Fax , Web au. All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude GST when sold in NZ. Prices are valid till 31 March 19, after that only while stocks last and without any bonus item. There is no obligation for resellers to adhere to these prices. OzSwiss European Tools will do all things necessary to maintain stocks of products advertised but cannot be made responsible for the unavailability of such products as a consequence of the failure of suppliers to deliver at all or on time or through any other circumstances beyond the control of OzSwiss European Tools. Limited stock items only available while stock lasts. E. & O.E., copyright with OzSwiss European Tools. Reproduction in whole or part is prohibited without written prior approval. AVAILABLE FROM: BATTERY TESTER AND ELECTRICAL SYSTEM ANALYZER WITH PRINTER LEM T10-G GREAT PRICE! NEW PRODUCT! $ MULTIGRIPS 400 MM NWS nearly indestructible multigrips with safety box joint for highest load double-toothed jaws, optimal jaw geometry with self-locking serration cogs additional induction hardened gripping capacity up to 100 mm - 40 % above ISO standard due to arch-shaped pitch adjustment with nail and wire holder finger trap protection for safe work box joint with guide surfaces coated handles shaped for optimal power transmission GREAT QUALITY! GERMAN MADE! $ GERMAN MADE! $62.00