TORCO-BLOCK. Fast and accurate tool assembly.

Transcription

1 TORCO-BLOCK Fast and accurate tool assembly

2 Toolholder assembly made easy TORCO-BLOCK allows easy and safe tool assembly. The built-in gauge does not require torque wrenches, nor tables with the corresponding torques values. TORCO-BLOCK is suited for clamping of tools in ER and micrun toolholders with corresponding collets. TORCO-BLOCK can be mounted overhanging on a workbench, thus enabling the mounting of pull studs. TORCO-BLOCK comes with five indicator rings. They cover all ER sizes from ER 11 to ER 32 for shaft diameters from 1 to 22 mm. These rings clip onto the positioning pin on the unit. The clamping nut is tightened until the needle reaches the position marked for the shaft diameter on the indicator ring. TORCO-BLOCK Indicator rings Adapters are available in all standard spindle interfaces. Adapter

3 Always the correct torque The only tool assembly device in the market that is comfortable and safe to use with integrated torque measuring. Usability ranges from ER 11 to ER 32, shank diameter from 1 to 22 mm and available for all standard machine interfaces. TORCO-BLOCK provides Use any wrench and still be able to correctly measure tightening torque Toolholder will not be overtorqued Minimal effort for toolclamping needed Correct tightening torque guaranteed, no bad runout due to overtorquing Quick-change function for different taper interfaces with only one 4 mm Allenkey within seconds Safe assembling of cutting tools Easy and quick toolholder and adapter handling Required footprint 170 x 270 mm Full or overhang mounting on a workbench possible Correct installation of pull studs with standard wrenches TORCO-BLOCK supplied inclusive indicator rings TB / IR Learn more about TORCO-BLOCK at rego-fix.com/en/products/specials/torco-block

4 TORCO-BLOCK and ER With perfectly clamped original toolholders to maximum performance When REGO-FIX first introduced the ER System in 1972, it took the machining world by storm. With the DIN 6499 standardization twenty years later, the REGO-FIX ER collet became the industry standard. Today, the ER System is still the most used toolholding system worldwide. The ER universe for TORCO-BLOCK ER colletholders SK/ ER BT/ ER HSK/ ER REGO-FIX- CAPTO/ER licensed by Sandvik Coromant ER collets ER-Standard ER-UP ER-Sta ER-UP Seite 83 Seite 83 ER clamping nuts and disks ER ERC ERB ERBC ERM ERMC ERMX intrlox ERMXC intrlox DS/ER KS/ER

5 Key advantages of the ER system The widest ER product range: clamps all diameters from 0.2 mm 36.0 mm. Outstanding flexibility for use with all tool types. Safe and accurate toolholding of all shank types and materials. Learn more about ER at rego-fix.com/en/ products/system/er

6 TORCO-BLOCK and micrun Toolclamping with highest precision An excellent runout accuracy paired with low vibration, not only increases your machining quality, but enhances your overall productivity and increases your tool life, thus successfully lowering your cutter costs. The micrun system provides all this thanks to its total system runout of 3 µm at 3 x D. The micrun universe for TORCO-BLOCK MR colletholders SK/ MR BT/ MR HSK/MR HSK/MRM Seite 12 MR collets MR MR clamping nuts and disks MR MRC MRM MRMC DS/MR KS/MR

7 Key advantages of the micrun system 3μm Total system TIR 3 µm at 3 x D. Designed for high-speed cutting. Silent and low vibration due to grooveless clamping nut. Learn more about micrun at rego-fix.com/en/ products/system/micrun

8 Get in touch We love to talk to you and share our toolholding expertise to maximize your productivity. REGO-FIX AG Obermattweg 60 / 4456 Tenniken / Switzerland P / F rego-fix@rego-fix.ch / Subsidiaries (distribution companies) REGO-FIX Tool Corp Anson Blvd / Whitestown / IN / USA P / F / info@rego-fix.com REGO-FIX Precision Tools (Shanghai) Co., Ltd. Room 6301 / Building 6 / No. 338 Jaililue Road ZhangJiang Hi-Tech Park / Shanghai / P.R. China P / F / sales@rego-fix.cn Find your sales partner on