NEIDLEIN LIVE CENTERS AND DEAD CENTERS
|
|
- Arnold Wilkerson
- 6 years ago
- Views:
Transcription
1 NEIDEIN IVE CENTERS AND DEAD CENTERS
2 Ultra ive Center RN Type RN with morse taper NEIDEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable construction high axial and radial load can be absorbed accurately. Therefore our live centers are outstanding for any application, especially for tooling with face drivers. 3 4 D5 cat. no. cat. no. type D5 3 4 rpm weight of axial load turning grinding max. work piece max. [1/min] max. [kg] [dan] RN M58 x RN M58 x RN M58 x RN M75 x RN M75 x RN M95 x RN M95 x RN M110 x NEIDEIN revolving ultra live centers type RN ensure: Application of live centers in case of high thrust and loading. high true running accuracy max turning type max grinding type enhanced true running accuracy HQ All our specified live centers can be obtained with enhanced true running accuracy of max cat. no. = 812XX1 e.g. RN4 4 type HQ cat. no Maintenance-free, due to gasket system and lifetime lubrication of bearings. Gasket system comprising variable seal and steel protection cover. Excellent demounting by means of extracting nut and extracting disk, which ensures safe and easy removal of the live center from the tailstock spindle sleeve. Extracting nuts and extracting disks see page 19 for accessories.
3 Type turning with contact-free labyrinth seal Type grinding with contact shaft seal true running accuracy max guaranteed true running accuracy max guaranteed Type RN with carbide tip for hardened work pieces 3 4 full carbide half carbide D6 D5 ive centers with full carbide tip cat. no. cat. no. type D5 3 4 rpm weight of axial load turning grinding full max. work piece max. carbide [1/min] max. [kg] [dan] RN M58 x RN M58 x RN M58 x RN M75 x RN M75 x RN M95 x RN M95 x RN M110 x ive centers with half-carbide tip cat. no. cat. no. type D5 D6 3 4 rpm weight of axial load turning grinding half max. work piece max. carbide [1/min] max. [kg] [dan] RN M58 x RN M58 x RN M58 x RN M75 x RN M75 x RN M95 x RN M95 x RN M110 x Extracting nuts and extracting disks see page 19 for accessories.
4 Ultra ive Center RNC Type RNC with morse taper NEIDEIN ultra live centers are designed for employment in turning, grinding and other production machines. extended tooling space For better access of cutting tools in case of limited tooling space D5 cat. no. cat. no. type D5 3 4 rpm weight of axial load turning grinding max. work piece max. [1/min] max. [kg] [dan] RNC M58 x RNC M58 x RNC M58 x RNC M75 x RNC M75 x RNC M95 x RNC M95 x RNC M110 x NEIDEIN revolving ultra live centers type RNC ensure: Application of live centers in case of high thrust and loading. high true running accuracy max turning type max grinding type enhanced true running accuracy HQ All our specified live centers can be obtained with enhanced true running accuracy of max cat. no. = 813XX1 e.g. RN4 4 type HQ cat. no Maintenance-free, due to gasket system and lifetime lubrication of bearings. Gasket system comprising variable seal and steel protection cover. Excellent demounting by means of extracting nut and extracting disk, which ensures safe and easy removal of the live center from the tailstock spindle sleeve. Extracting nuts and extracting disks see page 19 for accessories.
5 Type turning with contact-free labyrinth seal Type grinding with contact shaft seal true running accuracy max guaranteed true running accuracy max guaranteed Type RNC with carbide tip for hardened work pieces 3 4 full carbide 30 D5 ive centers with carbide tip cat. no. cat. no. type D5 3 4 rpm weight of axial load turning grinding carbide max. work piece max. [1/min] max. [kg] [dan] RNC M58 x RNC M58 x RNC M58 x RNC M75 x RNC M75 x RNC M95 x RNC M95 x RNC M110 x Extracting nuts and extracting disks see page 19 for accessories.
6 Ultra ive Center RNA Type RNA with morse taper NEIDEIN ultra live centers type RNA are designed for employment in turning and other production machines. for large work piece centers High degree of flexibility for clamping of work pieces with large centers. Variety of center cones ranging from Ø 25 to Ø 315, see page 16. Special cones up to Ø 400 available upon customer s request. 3 4 ø SK30 D5 cat. no. type D5 3 4 rpm max. [1/min] weight of work piece max. [kg] axial load max. [dan] RNA M75 x RNA M75 x RNA M95 x RNA M95 x RNA M110 x NEIDEIN revolving ultra live centers type RNA ensure: Application of live centers in case of high thrust and loading. true running accuracy max Easy exchange of center cones using SK30 short taper interface and cylinder screw. Maintenance-free, due to gasket system and lifetime lubrication of bearings. Gasket system comprising variable seal and steel comprehensive protection cover. Excellent demounting by means of extracting nut and extracting disk, which ensures safe and easy removal of the live center from the tailstock spindle sleeve. Abdrückmuttern und Abdrückscheiben unter Zubehör auf Seite 19
7 Ultra ive Center RNW Type RNW with morse taper NEIDEIN ultra live centers type RNW are designed for employment in turning and other production machines. maximum flexibility The adaptation of various changeable inserts ensures a high degree of flexibility and saving of costs. Various changeable inserts of different designs, see page 17. Special inserts available upon customer s request. 3 4 D5 cat. no. type D5 3 4 rpm weight of axial load max. work piece max. [1/min] max. [kg] [dan] RNW M58 x RNW M58 x RNW M58 x RNW M75 x RNW M75 x RNW M95 x RNW M95 x RNW M110 x NEIDEIN revolving ultra live centers type RNW ensure: Application of live centers in case of high thrust and loading. true running accuracy max Easy exchange of changeable inserts using spanner flat and open-end wrench or Tommy bar. Maintenance-free, due to gasket system and lifetime lubrication of bearings. Gasket system comprising variable seal and steel comprehensive protection cover. Excellent demounting by means of extracting nut and extracting disk, which ensures safe and easy removal of the live center from the tailstock spindle sleeve. Extracting nuts and extracting disks see page 19 for accessories.
8 Ultra ive Centers Type Cone Head RKA Type RKA basic retainer with morse taper NEIDEIN ultra live centers type cone head RKA are designed for heavy work pieces with large centers. The modular clamping system allows for a high degree of flexibility. It enables clamping of work pieces with centers from Ø 50 to Ø Ø 160 Ø 115 Ø 40 D5 Work pieces with centers between Ø 40 and Ø 115 can be clamped using the basic retainer. Basic retainer including extraction nut. cat. no. type D5 3 4 rpm max. [1/min] weight of work piece max. [kg] axial load max. [dan] RKA6 5 5 M48 x RKA6 6 6 M70 x True running accuracy max without fail. Special basic retainer available upon customer s request. Accessories on page 18
9 Ultra ive Center RNF Type RNF with morse taper NEIDEIN ultra live centers type RNF are especially suitable for employment in turrets, in manual tailstocks and in case of linear thermal extension of work pieces. The spring loaded, moving spindle and the engraved scale rings enable the adjustment and/or programming of various axial forces. 3 4 Ø D5 cat. no. type D5 3 4 rpm max. [1/min] weight of work axial load piece max. [kg] max. [dan] RNF RNF RNF RNF RNF Models with extraction thread or with special spindles are available upon customer s request. NEIDEIN ultra live centers type RNF ensure: Employment of live centers in turrets and manual tailstocks when hydraulic systems cannot guarantee any repositioning. Compensation if there is a linear thermal extension of work pieces or if the extension is caused by the process of machining. High true run-out accuracy max. 0,003 Maintenance free, due to the gasket system and the lifetime lubrication filling of the bearing. Obtaining of the axial forces applied via scale rings as well as clarification of the force ranges on the outside of the housing.
10 Ultra ive Ceter RNCF Type RNCF with morse taper NEIDEIN ultra live centers type RNCF are especially suitable for employment in turrets, in manual tailstocks and in case of linear thermal extension of work pieces. extended working space For better access of machining tools if there is limited working space Ø D5 cat. no. type D5 3 4 rpm max. [1/min] Models with extraction thread or with special spindles are available upon customer s request. weight of work piece max. [kg] axial load max. [dan] RNCF RNCF RNCF RNCF RNCF NEIDEIN travelling ultra live centers type RNCF ensure: Employment of live centers in turrets and manual tailstocks when hydraulic systems cannot guarantee any repositioning. Compensation if there is a linear thermal extension of work pieces or if the extension is caused by the process of machining. High true run-out accuracy max. 0,003 Maintenance free, due to the gasket system and the lifetime lubrication filling of the bearing. Obtaining of the axial forces applied via scale rings as well as clarification of the force ranges on the outside of the housing.
11 Ultra ive Center RNF/ RNCF VDI NEIDEIN ultra live centers type RNF/RNCF VDI are adapted in the tool turret and are especially suited for CNC machines without tailstock or with counter spindle. The spring loaded, moving spindle and the engraved scale rings enable the adjustment and/or programming of various axial forces. Type RNF with VDI retainer 30 3 VDI DIN ISO cat. no. type VDI 3 rpm max. weight of work axial load [1/min] piece max. [kg] max. [dan] RNF3 VDI RNF3 VDI RNF4 VDI True run-out accuracy max Type RNCF with VDI retainer VDI DIN ISO cat. no. type VDI 3 rpm max. [1/min] weight of work axial load piece max. [kg] max. [dan] RNCF3 VDI RNCF3 VDI RNCF4 VDI True run-out accuracy max
12 Changeable Center Cone for RNA / FNA For type RNA / FNA with SK30 interface Center cones for large work piece centers High degree of flexibility for clamping of work pieces with large centers. Suitable for live centers type RNA on page 6 and for dead centers type FNA on page 13. Special cones up to Ø 400 available upon customer s request. For types RNA and FNA cat. no. W The center cones are fastened with a screw M8 DIN 912 onto the base body. SK30 ø W1 The center cones can be forced off with a screw M10.
13 Changeable Inserts for RNW / FNW For type RNW / FNW with taper interface Changeable inserts for a maximum of flexibility The adaptation of various changeable inserts ensures es a high degree of flexibility and saving of costs. Suitable for live centers type RNW on page 7 and for the dead centers type FNW on page 13. A Special inserts available upon customer s request. B For types RNW 3 and 4 FNW 3 and 4 cat. no. type 30 C A B C D E F G D with carbide insert E For types RNW 5 and 6 FNW 5 and 6 cat. no. type A B C D E F G F G 90 For quick demounting all changeable inserts come with spanner flat or cross hole.
14 Changeable Center Cone for RKA Type RKA centering taper Work pieces with large center holes from Ø 120 to Ø 460 are clamped with a basic retainer and a changeable center cone. For type RKA cat. no True run-out accuracy max 0.02 at changeable center cone is guaranteed. Special changeable center cones (90 / 75 / various diameters) available upon customer s request. Suitable for live center type RKA on page 8. Ø Ø 160
15 Extracting Nuts and Extracting Disks extracting nut extracting disk Accessories for demounting Accessories for safe and quick demounting of our ultra live centers, dead centers, center pins and face drivers. Extracting nut type DIN 1804 h for ultra live centers type RN/RNC/RNA/RNW cat. no. size h Type DIN 1804 h tailstock spindle sleeve M58 x M75 x M95 x M110 x for other center pins and face drivers cat. no. h h M28 x M32 x M35 x M36 x M48 x M70 x Extracting disk h Extracting disk for ultra live centers type RN / RNC / RNA / RNW cat. no. size h Type DIN 807 Extracting nut type DIN 807 for dead centers and center pins cat. no. s h M16 x M22 x M27 x M36 x M48 x M68 x h S
16 Custom-Made Designs Upon customer s request we design and produce center pins for any kind of clamping device. Made of tool steel or with carbide insert, standard or customized tapers. You advise us of your requirements and we will submit a non-binding offer to you with best possible delivery time. Type RN special with extra long spindle for more workspace for tools Type RN special with air-trough attachment unit/for chip cleanup on work piece Dead center special SK with taper 1:7.5 for spindle sleeves mounted in e.g. EMAG machine tools. Dead center with short taper SK30 various types for MAG/ Böhringer and INDEX machines 20 NEIDEIN ive Centers/ Dead Centers 3.0
17 Dead Centers FN / FNC Type FN with morse taperl Rotating and fixed tailstock spindle sleeve. Designed for employment in turning, grinding and other production machines. made of full-hardened tool steel can be reground cat. no. type high true running accuracy max FN M27 x FN M36 x FN M48 x FN M68 x Type FNC with morse taper extended working space For better access of cutting tools in case of limited working space. 30 cat. no. type high true running accuracy max FNC M27 x FNC M36 x FNC M48 x FNC M68 x All types with extracting thread to prevent spindle ball bearings or solid spindle sleeves from damage. Extracting nuts see page 19 for accessories. 12 NEIDEIN ive Centers/ Dead Centers 3.0
18 Dead Centers FNA / FNW Type FNA with morse taper for large work piece centers High degree of flexibility for clamping of work pieces with large centers. Different types of center cones from Ø 25 to Ø 315, see page 16. Special center cones up to Ø 400 available upon customer s request. ø M8 SK 30 cat. no. type true running accuracy at center cone: max FNA M27 x FNA M36 x FNA M48 x FNA M68 x maximum flexibility The adaptation of various changeable inserts ensures a high degree of flexibility and saving of costs. Type FNW with morse taper Various changeable inserts of different designs, see page 17. Special inserts available upon customer s request. cat. no. type true running accuracy at center cone: max FNW M27 x FNW M36 x FNW M48 x FNW M68 x Extracting nuts, see page 19 for accessories.
19 Carbide Center Pins DIN 806 Type DIN 806 option model E / HE To be applied with hardened work pieces For headstocks and fixed tailstock spindle sleeves. Designed for employment in grinding and other production machines. Type DIN 806 model E with half carbide tip cat. no hohe Rundlaufgenauigkeit: max. 0,002 Type similar to DIN 806 model E with full carbide tip cat. no high true running accuracy max Type DIN 806 model HE flattened with half carbide tip cat. no. h high true running accuracy max h
20 Carbide Center Pins DIN 807 Type DIN 807 model E / HE with extraction screw thread DIN 807 with extraction screw thread to prevent spindle ball bearings or unpierced spindle sleeves from damage. Extracting nuts, see page 19 for accessories. Available with spanner flat upon request. Type DIN 807 model E with half carbide pin cat. no x x x x x x high true running accuracy max Type similar to DIN 807 model E with full carbide pin cat. no x x x x x x high true running accuracy max Type DIN 807 model HE flattened with half carbide tip cat. no. h x x x x x x high true running accuracy max h Extracting nuts, see accessories page 19.
21 Changeable Center Cone for RNA / FNA For type RNA / FNA with SK30 interface Center cones for large work piece centers High degree of flexibility for clamping of work pieces with large centers. Suitable for live centers type RNA on page 6 and for dead centers type FNA on page 13. Special cones up to Ø 400 available upon customer s request. For types RNA and FNA cat. no. W The center cones are fastened with a screw M8 DIN 912 onto the base body. SK30 ø W1 The center cones can be forced off with a screw M10.
22 Changeable Inserts for RNW / FNW For type RNW / FNW with taper interface Changeable inserts for a maximum of flexibility The adaptation of various changeable inserts ensures es a high degree of flexibility and saving of costs. Suitable for live centers type RNW on page 7 and for the dead centers type FNW on page 13. A Special inserts available upon customer s request. B For types RNW 3 and 4 FNW 3 and 4 cat. no. type 30 C A B C D E F G D with carbide insert E For types RNW 5 and 6 FNW 5 and 6 cat. no. type A B C D E F G F G 90 For quick demounting all changeable inserts come with spanner flat or cross hole.
23 KCHP/VKCHP High-precision force chuck SAP to KCHP Automated drive carrier KFHP Precision power chuck KCHSF Centrifugal force chuck VMCHP Diaphragm chuck ZK/SK-S Collet chuck with clamping lamellas D Collet expanding mandrel TGC/FTGC Tool chuck OVEK High-precision force chuck OVEKA Compensating chuck OVEKAV Moving compensating chucks FD/AFD Twist finger type console chuck SPECIA SOUTIONS Tailor made solutions PZHM Pneumatic force clamping cylinder SwissChuck AG Industriestrasse 3 CH-8307 Effretikon P F SwissChuck.com Service@SwissChuck.com Sales@SwissChuck.com
PATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
More informationPATENT EP Compensating Chuck Retractable OVEKAV / OVARZV
PATENT EP1 190 815 Compensating Chuck Retractable OVEKAV / OVARZV COMPENSATING CHUCK - RETRACTABLE The OVEKAV / OVARZV retractable compensating chucks made by SwissChuck are unique! These chucking systems
More informationNEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O
NEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O HIGH-PRECISION TOOL GRIND CHUCK TGC P O Increase your productivity and lower your costs! Whenever high-performance tools are manufactured, there is a need for
More informationCLAMPING TECHNOLOGY SPECIAL SOLUTIONS
CLAMPING TECHNOLOGY SPECIAL SOLUTIONS BESPOKE SPECIAL SOLUTIONS You define the task and we develop and implement the solution! Special clamping chucks are tailor-made products. They are adapted to your
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More information1.3. Face Drivers for Grinding. FFBR with Flange Retainer. FBSR with Taper Shank Retainer. FFBR/FBSR Changeable Parts FFB/FFBH.
1.3 Face Drivers for Grinding FFBR with Flange Retainer FBSR with Taper Shank Retainer FFBR/FBSR Changeable Parts FFB/FFBH FFB/FFBH Changeable Parts FBSR PN/FFPR/FBS Special Face Drivers NEIDLEIN-SPANNZEUGE
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationTools for Clamping between Centers process oriented for turning, hard turning, grinding and milling
www.neidlein.de Tools for Clamping between Centers process oriented for turning, hard turning, grinding and milling Process oriented clamping solutions with maximum torque transmission and supreme accuracy
More informationFace Drivers with appropriate changable parts and accessories
8 NEIDLEIN-SPANNZEUGE GmbH www.neidlein.de 9 Face Drivers with appropriate changable parts and accessories FSB FFB FSP FFBR FDNC FOR TURNING AND HARD TURNING WITH DRIVE PINS Face Drivers FSB / SB 10 Face
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationTHE RIGHT LIVE CENTRE FOR EVERY APPLICATION. For small and large centres For cramped work area For lower-lying centres For large boreholes
THE RIGHT LIVE CENTRE FOR EVERY For small and large centres For cramped work area For lower-lying centres For large boreholes 2006 LIVE CENTRES The requirement for high cutting capacities and high working
More informationFace Drivers Live Centers Dead Centers
Face Drivers Live Centers Dead Centers Logansport Matsumoto Company is the present entity of the Logansport Machine Company, which in 1916 began building its enviable reputation for quality engineering
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationOverview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
More informationTECNOLOGIE FRB TECNOLOGIE FRB
Live centers and face driver for turning and grinding General catalogue TECNOLOGIE FR Since 1960 TECNOLOGIE FR has designed, manufactured and marked many different patented product lines that are truly
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More information1.1. Face Drivers. for Soft and Hard Turning with Drive Pins FSB FFB FFBH. Pipe Driver. Changeable Parts
1.1 Face Drivers for Soft and Hard Turning with Drive Pins FSB SB FFB FFBH Pipe Driver Changeable Parts NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen. Germany Phone +49 (0) 74 71 /
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More information1.2. Face Drivers. for Soft Turning with Drive Disks FSP FSPB. Changeable Parts
1.2 Face Drivers for Soft Turning with Drive Disks FSP FSPB Changeable Parts NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen. Germany Phone +49 (0) 74 71 / 96 08-0. Fax +49 (0) 74 71
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationExample workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)
More information[ means: Two in one. EMCOMAT E-300 E-360 E-400 E-480. Cycle-controlled lathes with high-powered cutting performance and maximum precision
[ E[M]CONOMY] means: Two in one. EMCOMAT E-300 E-360 E-400 E-480 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens drive system - Camlock
More informationSKODA LIVE CENTERS. Skoda & Sowa Heavy Duty Live Centers - CSN PARTS FOR HEAVY DUTY LIVE CENTERS. Parts For Heavy Duty Live Centres
Skoda & Sowa Heavy Duty Live Centers - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads
More informationComplete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
More informationAir precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
More information1.1. Face Drivers. Standard-face drivers for soft/green and hard tooling FSB FFB FFBH. Pipe Driver
1.1 Face Drivers Standard-face drivers for soft/green and hard tooling FSB SB FFB FFBH Pipe Driver NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen Germany Phone +49 (0) 7471 / 9608-0.
More informationRUCKNER. High Performance Live Centres for heavy-duty machining F W ± F S + F F
High Performance Live Centres for heavy-duty machining High concentricity Shaft seal ring protects the bearings from dirt and coolant Housing high quality material, forged, therefore uniform grain structure,
More informationSOFTSYNCHRO HIGH PERFORMANCE TAP H O L D E R S
SOFTSYNCHRO HIGH PERFORMANCE TAP H O L D E R S You Know Taps Now take them to the next level Triple your tap life and more with Emuge Softsynchro Tap Holders! E muge is widely recognized in the industry
More informationHYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationChapter 23: Machining Processes: Turning and Hole Making
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationFirst B2B eshop of the clamping technology industry
DRILL CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationCNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationCLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationselection of our most popular products complete range visit empowered by precision bison originals
THeBeST BeST OFOF 2018 THe THeOF BeST2018 2017 A selection of our most popular products selection of our most popular products A selection of our Amost popular products THe BeST OF 2017 A selection of
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been one of the leading manufacturers
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been one of the leading manufacturers
More informationCatalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13
Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More informationDesign to Cost. EMCOTURN E25. CNC turning center for bar stock work up to Ø 25 mm (1 ) and also chucking work. TURNiNG
Design to Cost. EMCOTURN E CNC turning center for bar stock work up to Ø mm ( ) and also chucking work TURNiNG EMCO-WORLD.COM EMCOTURN E Uncompromising quality right down to the last detail at a very reasonable
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY The BNE series is renowned for its high rigidity, heavy cutting capability and outstanding precision. The new MSY model extends the ability of the BNE series
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been a leading manufacturer of state-of-the
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationUniversal. CNC Turning machine TNA400
Universal CNC Turning machine TNA400 1 2 The TNA400 at a glance The TRAUB TNA400 is a well established machine from TRAUB in the product range "Universal CNC turning machines". A machine that can be equipped
More informationQUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More informationOperating instruction for the quick-change tap holders type:
type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application
More informationUNIVERSAL CENTRE LATHES
UNIVERSAL CENTRE LATHES TRADITION AND EXPERIENCE SR 6000 SR 2000 ŠKODA machine tools of different type and variant have been present in the world market for over 100 years. Among them were a lot of special
More informationMax. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:
CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationDUGARD EAGLE. Mega Slant and Mega Turn Heavy Duty CNC Lathes
DUGARD EAGLE Mega Slant and Mega Turn Heavy Duty CNC Lathes Dugard Eagle SS and SA Series Machine Features 60 for SA-Series, 45 for SS-Series slant bed construction ensures maximum stability and convenient
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department
Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationEMCOMAT 14S/14D 17S/17D 20D
[ ] E[M]CONOMY means: Mastering big challenges with a small machine. EMCOMAT 14S/14D 17S/17D 20D Universal lathe with toolmaker precision for industrial use EMCOMAT 14S/14D [ Digital display] - 3-axis
More informationConstant Face Driver CoE. CoE: Retrofitting has time-out. Turning and milling in one set-up. Benefits and areas of application
Benefits and areas of application 11 CoE: Retrofitting has time-out Best for efficiently turning of workpieces along their entire Developed according to the construction set principle, length without re-clamping
More informationHardinge FlexC Dead-Length Collet System Style DL 80mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 80mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationFace Drivers FSB/SB. Clamping tools for tooling between centers. Type FSB with flange-retainer
Face Drivers FSB/SB Clamping tools for tooling between centers Type FSB with flange-retainer The entire surface of the work piece can be tooled and finished by clamping with a maximum of torque transmission.
More informationQUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationCNC LATHES. HL Series. HL-25, HL-25Durga, HL-25 C-Axis, HL-25DM, HL-25DMS, HL-35, HL /1500, HL-55. CNC Machine Tools
CNC LATHES HL Series CNC Machine Tools www.femcousa.com HL-25, HL-25Durga, HL-25 C-Axis, HL-25DM, HL-25DMS, HL-35, HL-45 1000/1500, HL-55 FEMCO USA Headquarters FEMCO has been manufacturing quality machine
More informationHardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More informationMulti-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
More informationACP 160. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp Technologies
ACP 160 Cylinder boring machine A Company of ThyssenKrupp Technologies BERCO S.p.A. ACP 160 Cylinder boring machine Berco's high productivity ACP160 series presents the ultimate in engine block boring
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationUniversal. CNC Turning machine TNA300
Universal CNC Turning machine TNA300 1 2 The TNA300 at a glance TRAUB s product philosophy does not offer the compromises of a modular design principle but tailormade a 4-axes machine to suit your production
More information