HydroForce HT Hydraulic Chuck High Torque
|
|
|
- Dominick Lang
- 6 years ago
- Views:
Transcription
1 HydroForce HT Hydraulic Chuck High Torque Primary Application First choice solution for rotating applications. HydroForce HT gives you an unparalleled combination of accuracy and clamping force. HydroForce HT requires only two clamping sizes for all of your tooling applications. Features, Functions, and Benefits Compact and Stable Design Shorter projection length and thicker front wall cross section result in higher rigidity. This allows higher cutting parameters and better surface quality. Focused and Flexible Product Offering Allows direct clamping for 20mm and 32mm (3/4" and 1-1/4"). Reducer sleeves available for all combinations metric/inch, which results in reduced toolholder inventory, maximum flexibility, and minimum cost. Advanced Hydraulic Clamping Three times better clamping force than regular hydraulic chucks, runout of 3 microns at 2.5 times diameter overhang vibration dampening. This results in up to 50% longer tool life and improved workpiece surface quality. Hydraulic Chuck (HC) Basic Working Principle Balance Quality at G2.5 at RPM Lower vibration, particularly at high speeds. This results in higher productivity. Easy Side Access for Clamping/Unclamping Mechanical stop for clamping and 10mm (3/8") length adjustment. This results in reliable, consistent clamping and no over torque. No torque wrench required. piston clamping screw tool length adjusting screw pressure piston hydraulic medium expansion sleeve E2
2 HydroForce Advanced Features Short and compact design. Side actuation for clamping/ unclamping. 40% thicker cross-section wall. Axial length adjustment through coolant. Direct clamping diameter 20mm and 32mm (3/4" and 1-1/4"). Reducer sleeves apply for other diameters. E3
3 HSK63A Shank Tools HCTHT Metric HSK Form A order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg HSK63AHCTHT20090M 20 52, mm 5 mm 1,54 HCTHT Inch HSK Form A HSK63AHCTHT mm 5 mm 3.39 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue Wrenches must be ordered separately. HSK coolant unit and wrench are available and must be ordered separately; see page L44 of the Kennametal Innovations Master Catalogue E4
4 HSK100A Shank Tools HCTHT Metric HSK Form A order number catalogue number D1 D2 L1 L2 L9 V wrench size actuation screw wrench size stop screw kg HSK100AHCTHT20090M 20 65, mm 5 mm 3, HSK100AHCTHT32100M 32 80, mm 6 mm 4,29 HCTHT Inch HSK Form A HSK100AHCTHT mm 6 mm 9.61 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue HSK coolant unit and wrench are available and must be ordered separately; see page L44 of the Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E5
5 KM63TS Shank Tools HCTHT Metric KM63TS order number catalogue number D1 D2 D21 L1 L2 L9 V actuation screw stop screw kg KM63TSHCTHT32080M 32 65, mm 6 mm 2,00 HCTHT Inch KM63TS order number catalogue number D1 D2 D21 L1 L2 L9 V actuation screw stop screw lbs KM63TSHCTHT mm 6 mm 4.42 Hydraulic chuck technical section, see pages M84 M87of the Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E6
6 KM63XMZ Shank Tools HCTHT Metric KM63XMZ order number catalogue number D1 D2 D21 L1 L2 L9 V actuation screw stop screw kg KM63XMZHCTHT32085M 32 65, mm 4 mm 2,27 HCTHT Inch KM63XMZ order number catalogue number D1 D2 D21 L1 L2 L9 V actuation screw stop screw lbs KM63XMZHCTHT mm 4 mm 4.59 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E7
7 KM4X63 Shank Tools HCTHT Metric KM4X order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg KM4X63HCTHT20090M 20 52, mm 5 mm 1,63 HCTHT Inch KM4X KM4X63HCTHT mm 5 mm 3.57 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue KM4X63 coolant unit and wrench are available and must be ordered separately; order numbers and E8
8 KM4X100 Shank Tools HCTHT Metric KM4X order number catalogue number D1 D2 L1 L2 L9 V wrench size actuation screw wrench size stop screw kg KM4X100HCTHT20085M 20 65, mm 5 mm 3, KM4X100HCHT32095M 32 80, mm 6 mm 4,37 HCTHT Inch KM4X KM4X100HCHT mm 6 mm 9.66 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue KM4X100 coolant unit and wrench are available and must be ordered separately; order numbers and E9
9 BT40 Shank Tools HCTHT Metric BT40 order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg BT40HCTHT20070M mm 5 mm 1,67 HCTHT Inch BT BT40HCTHT / mm 5 mm 3.70 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see pages L45 L50 of the Kennametal Innovations Master Catalogue E10
10 BT50 Shank Tools HCTHT Metric BT50 order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg BT50HCTHT32090M mm 6 mm 5,09 HCTHT Inch BT BT50HCTHT / mm 6 mm Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see pages L45 L50 of the Kennametal Innovations Master Catalogue For D1 of 32mm (1,25"), please use 6mm Allen wrench with minimum length of 180mm. E11
11 CV40 CV50 Shank Tools HCTHT Inch CV CV40HCTHT / mm 5 mm 3.41 HCTHT Inch CV CV50HCTHT / mm 6 mm 9.48 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see pages L45 L50 Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E12
12 DV40 DV50 Shank Tools HCTHT Metric DV40 order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg DV40HCTHT20070M mm 5 mm 1,58 HCTHT Metric DV50 order number catalogue number D1 D2 L1 L2 L9 V actuation screw stop screw kg DV50HCTHT32080M mm 6 mm 4,45 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see pages L45 L50 Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E13
13 BTKV40 BTKV50 Shank Tools HCTHT Metric BTKV40 order number catalogue number D1 D2 L1 L1FC L2 L9 V actuation screw stop screw kg BTKV40HCTHT20070M mm 5 mm 1,62 HCTHT Metric BTKV50 order number catalogue number D1 D2 L1 L1FC L2 L9 V actuation screw stop screw kg BTKV50HCTHT32090M mm 6 mm 5,13 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see page L45-L50 Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E14
14 CVKV40 CVKV50 Shank Tools HCTHT Inch CVKV40 order number catalogue number D1 D2 D21 L1 L1FC L2 L9 V actuation screw stop screw lbs CVKV40HCTHT mm 5 mm 3.43 HCTHT Inch CVKV50 order number catalogue number D1 D2 D21 L1 L1FC L2 L9 V actuation screw stop screw lbs CVKV50HCTHT mm 6 mm 9.52 Hydraulic chuck technical section, see pages M84 M87 of the Kennametal Innovations Master Catalogue For retention knobs, see page L45 L50 Kennametal Innovations Master Catalogue For diameter D1 32mm (1-1/4"), use an L-shape Allen wrench with side length of approximately 200mm. E15
HydroForce. HydroForce HT Hydraulic Chuck High Torque. Hydraulic Chuck (HC) Basic Working Principle
HydroForce HT ADVANCES 2015 HydroForce HT Hydraulic Chuck High Torque First choice solution for rotating applications. HydroForce HT gives you an unparalleled combination of accuracy and clamping force.
Hydraulic Chuck Reducer Sleeves
Hydraulic Chuck Reducer Sleeves with ERICKSON SAFE- OCK Smart Coolant Primary Application ERICKSON Safe-Lock Smart Coolant reducer sleeves are specially designed for high-precision and secure clamping
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
Shrink Fit System... Thermal Induction
Shrink Fit System... Thermal Induction process-controlled heating no overheating on the tool quick and accurate shrinking, on and off for tools with carbide or steel shanks slim design of the chucks through
HYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
BETTER GUARANTEED. PERFORMANCE. DL-NORISK. The ONLY modular system with the performance of a solid carbide end mill.
www.kennametal.com by Haimer and Kennametal The ONLY modular system with the performance of a solid carbide end mill. BETTER PERFORMANCE. GUARANTEED. OFFER VALID THROUGH JUNE 30, 2017 Call today and refer
Techniks Certified Face Mill Arbors
Techniks Certified Face Mill Arbors Manufactured from H13 tool steel for performance and long life. Extended Length Face Mill Arbors CAT40, CAT50 now up to 12" gauge lengths H6 arbor tolerance reduces
HYDRAULIC CHUCKS. Quick facts about SPV Spintec s hydraulic chucks! Why should you use SPV Spintec s hydraulic chucks?
Quick facts about SPV Spintec s hydraulic chucks! Why should you use SPV Spintec s hydraulic chucks? Permits machining with much closer toleranses. Quicker and simpler tool changes. Runout accuracy All
Machinist s Guide to Toolholder Maintenance
Machinist s Guide to Toolholder Maintenance For Collet & Nut Style Toolholders General Overview Modern CNC machines feature high-capacity tool changers that automatically swap toolholders in and out of
CAT40 Toolholders ER11
CAT40 ER11 CAT40 & Straight Shank ER11 Collet Chucks (Balanced to G2.5@18,000 RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming
The Universal Hydraulic Expansion Toolholder
Superior Clamping and Gripping The Universal Hydraulic Expansion Toolholder Superior Clamping and Gripping Henrik A. Schunk, Kristina I. Schunk and Heinz-Dieter Schunk Top Performance in the Team SCHUNK
Assembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter
Translated version of the instructions Version: 11/2017 SAP no.: 400151427 Assembly and Adjusting Instructions for Modules 6x6 and 4x4 Alignment Adapter The document was prepared by Gühring KG. All rights
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
KTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
TOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
CT40 SD-16 80mm. BT40 SD-16 90mm. HM 32mm 4 CAT40. HM 32mm 105 BT40
S Collet & HM Milling Chuck Contents BT...S S Collet High Accuracy Chucks 52 CT...S HSK...S HM HM Milling Chucks 53 Section Contents 50 S Collet Chuck Measurement System Interface Collet Type Gage ength
Hardinge FlexC Collet System Style D 65mm
Hardinge FlexC Collet System Style D 65mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read
Precision Retention Knobs and Setup Equipment
Precision Retention Knobs and Setup Equipment Retention Knobs All mating surfaces are precision ground Manufactured to the highest standards for maximum safety and long life ightening Fixtures Preset tools
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
N/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
Precision Retention Knobs and Setup Equipment
Retention Knobs All mating surfaces are precision ground ightening Fixtures Manufactured to the highest standards for maximum safety and long life Preset tools offline to save machine time For CA, B, HSK,
ACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
Technical. Toolholding & Tapping. Product Warranty
Technical 4 Product Warranty Parlec Inc. warrants all tools, tooling systems, and tool presetters to be free of defects in manufacturing and materials for a period of one year from the date of shipment.
CNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
PIONEER TOOL HOLDING SOLUTIONS
PIONEER N.A., INC. PIONEER TOO HODING SOUTIONS 2018 CATAOG www.pioneerna.com PIONEER DUA CONTACT What is Dual Contact Dual Contact spindle gageline is ground to a controlled dimension to the taper of the
ROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
100% Safety in High-performance milling. For your Standard Weldon Tools.
100% Safety in High-performance milling. For your Standard Weldon Tools. Tendo Aviation. Developed for the aviation industry, suitable for all industries with the highest demands. SCHUNK toolholders such
Troubleshooting for Milling Chuck. Details of the trouble Cause Solution / Countermeasures
TROUBLESHOOTING 571 Troubleshooting Troubleshooting for Milling Chuck Details of the trouble Cause Solution / Countermeasures Tool cannot be held Tool shank diameter should be within h7 tolerance. Tool
Investigation of Retention Knob Geometry on Machining Dynamics
Investigation of Retention Knob Geometry on Machining Dynamics Tony L. Schmitz University of North Carolina at Charlotte, Charlotte, NC tony.schmitz@uncc.edu Abstract In this study, impact testing is used
User s Guide. Silent Tools. turning products
User s Guide Silent Tools turning products Introduction This guide will help you to use dampened boring bars (Silent Tools) to achieve the best possible results in internal turning. Silent Tools dampened
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
Hardinge FlexC Dead-Length Collet System Style A 80mm. Installation Instructions and Parts Lists. FlexC 80mm Collet System Style A Instructions B-170B
Hardinge FlexC Dead-Length Collet System Style 80mm Installation Instructions and Parts Lists 1 General Safety Information efore installing the Hardinge FlexC Collet System on your machine tool, thoroughly
Hardinge FlexC Collet System Style D
Hardinge FlexC Collet System Style D Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read this
powrgrip for automotive manufacturing Superior toolholding strength and accuracy
powrgrip for automotive manufacturing Superior toolholding strength and accuracy REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Aerospace Introduction
CNC Tooling Solutions
CNC Tooling Solutions Your success hangs on the reliability of every component. CNC TOOLING SOLUTIONS FROM SPINDLE TO WORKPIECE 2017 Techniks is synonymous with toolholders, but the key to our success
Hardinge FlexC Dead-Length Collet System Style DL 80mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 80mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
überchuck High Performance Milling Chucks
überchuck High Performance Milling Chucks 00 Years of Innovation For more than 00 years, the name lbrecht has been synonymous with innovation and quality. In 908, the Joseph lbrecht Bohrfutterfabrik GmbH
UNION T 110 UNION T 130 UNION T 150
P-series K-series T-series F-series UNION T 110 UNION T 130 UNION T 150 Horizontal Boring and Milling Machine Table Type UNION CNC table type boring mill T 110, T 130 and T 150 Compact boring mill for
TAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
adaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
Hardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
powrgrip for aerospace manufacturing Superior toolholding strength and accuracy
powrgrip for aerospace manufacturing Superior toolholding strength and accuracy REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Aerospace Introduction
CONSTANT SPEED TAPPING
NON REVERSING TOOLS CONSTANT SPEED TAPPING For High-Production CNC Tapping Without Machine Reversal. Constant Speed Tapping relies on the compact tapping head to provide tap reversal. The machine spindle
Hawk Eye. engineered by SCHÜSSLER.
Hawk Eye R engineered by SHÜSSL www.k-schuessler.de The new precision collet chuck Hawk Eye R engineered by SHÜSSL We are proud to present our new precision collet chuck HAWK EYE. Highly accurate runout
DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
Competence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
SHOWA TOOL. GENERAL CATALOG SHOWA TOOL
SHOWA TOOL SHOWA TOOL GENERAL CATALOG www.showatool.com SHOWA TOOL SH INDEX A AS B ADJUST SCREW for MICRON CHUCK H series, M series BC SPARE BLADE CLAMP 67 BK BLADE (For Standard Head) 60 BKF BLADE (For
HPC FACE MILLS for rough and finish machining
HOLLFELDER CUTTING TOOLS THE ORIGINAL HPC FACE MILLS for rough and finish machining THE ULTIMATE EVOLUTION! AXIALLY CLOSED CHIP FLUTES EXTREMELY HIGH NUMBER OF CUTTING EDGE FOR FINISH MACHINING CUTTERS
ZeroClamp. machine tool components
ZeroClamp machine tool components Even at a low $80 dollar hourly rate, every minute the spindle isn t turning is costing you more than $1 dollar... The tailor-made solution How do you increase machine
CoroChuck 970 SynchroFlex Benefits
Benefits Better surface quality on the flanks of the cut threads Longer tool life due to less friction Greater process security Due to the reduced risk of breaking the tap especially with small dimensions
Stable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
Hardinge FlexC Dead-Length Collet System Style A. Installation Instructions and Parts Lists. FlexC Collet System Style A Instructions B-153
Hardinge FlexC Dead-Length Collet System Style A Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
AUTOMATIC CLAMPING TECHNOLOGY MODULAR SYSTEMS INDIVIDUALLY CONFIGURED.
AUTOMATIC CLAMPING TECHNOLOGY MODULAR SYSTEMS INDIVIDUALLY CONFIGURED. AUTOMATIC CLAMPING TECHNOLOGY EVERYTHING FROM A SINGLE SOURCE As a manufacturer of complete tool clamping units, the development of
ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
VERTICAL MACHINING CENTER
MCH-630 MCV-7 VERTICAL MACHINING CENTER MCV-A MCV-60 MCV-BA MCV-10 MCV-1250 MCV-1450 MCV-1700 MCV- No. 3, Kung-Yeh Lane, Fengcheng Road, Nanshih Village, MCV-2600 Wufeng District, Taichung City, 41357,
Technical Manual. ETP-CLASSIC incl type R. Content
Technical Manual ETP-CLASSIC incl type R Content Technical parts description...2 Mounting/dismantling tips...4 Design suggestions...7 Tolerances...13 Central bolt...15 Torsional stiffness...16 Screw pitch
Incredibly low runout will provide dramatic payback by improving machining capability and reducing production costs.
igh Precision Collet Chuck System CATAO No. Enhanced high precision collet system outperforms conventional ER collet chucks Incredibly low runout will provide dramatic payback by improving machining capability
COLLET FIXTURES, CHUCKS AND COLLETS FOR MACHINING CENTERS ROTARY TABLES MANUAL LATHES GRINDERS
OLLET FIXTURES, HUKS N OLLETS FOR MHINING ENTERS ROTRY TLES MNUL LTHES GRINERS ROYL QUIK-GRIP POWER-LOK HYRULI OLLET FIXTURES Extremely Fast ollet hanges hanging collets on a Royal Quick-Grip Power-lock
ULTRA PRECISION HARD TURNING MACHINES
ULTRA PRECISION HARD TURNING MACHINES Hembrug Machine Tools, with more than 50 years experience in the design, manufacturing and marketing of ultra precision, fully hydrostatic turning machines, Hembrug
TAPPING Parlec offers the largest range of tapping capabilities available. Tapping
Tapping Parlec offers the largest range of tapping capabilities available. Rigid, Tension Only, and Tension and Compression Systesm are standard, along with Coolant or Coolant Groove Adapters Selection
Accessories. Scan these QR Codes Featured Video. Current Promotion
Current Promotion Scan these QR Codes Featured Video 211 TOOLJAW The Toolholder Clamp Champ Description BT30 Taper TOOLJAW BT35 Taper TOOLJAW BT40 Taper TOOLJAW BT45 Taper TOOLJAW BT50 Taper TOOLJAW CT30
TOOL HOLDERS.
TOOL HOLDERS www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
Th Series HIGH SPEED MACHINING CENTERS
Th Series HIGH SPEED MACHINING CENTERS HORIZONTAL 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing of the
TECNOLOGIE FRB TECNOLOGIE FRB
Live centers and face driver for turning and grinding General catalogue TECNOLOGIE FR Since 1960 TECNOLOGIE FR has designed, manufactured and marked many different patented product lines that are truly
CHAMFERING RINGS UPDATED. Ring Diameters: 1.34, 1.50, 1.65 and Fits Body Diameters: 10.0mm(.3937") mm(1.000")
Ring Diameters: 1.34, 1.50, 1.65 and 1.85 Fits Body Diameters: 10.0mm(.3937") - 25.4mm(1.000") L:D Ratios: Gold Twist 3xD, 5xD, 8xD & 12xD Quad Twist & Quad Drill+ 3xD, 4xD & 5xD Maximum Chamfer DOC:.118"
Operating instruction for the quick-change tap holders type:
type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application
Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
Customer-specific Hydraulic Expansion Toolholder Solutions. For your individual Tool and Workpiece Clamping
Customer-specific Hydraulic Expansion Toolholder s For your individual Tool and SCHUNK hydraulic expansion Toolholders More than 75,000 implemented, customer-specific s and tool clamping in the micron
Collet Mandrels 15. Registered trade mark of RINGSPANN GmbH, Bad Homburg
Mandrels 1 RINGSPANN Registered trade mark of RINGSPANN GmbH, Bad Homburg Flange Mandrels Advantages High concentricity up to 0,01 Rapid changeover to other clamping diameters Pull-back action during clamping;
CADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
Jaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
Catalog Section Guide Full Table of Contents pgs. 2 4
Catalog Section Guide Full Table of Contents pgs. 2 4 Collet & Nut Holders Collets & Nuts End Mill Holders ShrinkFIT Holders page 15 page 49 page 75 page 93 Face Mill Arbors Other Holders Turn/Mill Tooling
[ means: Precision and reliability - In series. EMCO MAXXTURN 95. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMY] means: Precision and reliability - In series. EMCO MAXXTURN 95 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 95 [Control unit] - Ergonomic, swivel-type control
KORLOY Indexable new generation drill KING DRILL
KORLOY Indexable new generation drill KING DRILL Optimized insert design for maximum drilling efficiency KING DRILL Code system of holder K 5D - 0 07 KING/KORLOY Aspect ratio(l/d) D,.5D, 3D, 3.5D, 4D,
Technical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
HYDRAULIC EXPANSION CHUCKS
Precision Cutting Tools HYDRAULIC EXPANSION CHUCKS HSK-A/C ISO TAPER MAS/BT for universal application high clamping force Precision Cutting Tools ISO taper hydraulic chucks Page 3 MAS/BT hydraulic chucks
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
DIN ISO 12164
It is the outstanding rigidity and accuracy of the NEW BABY CHUCK, used for holding the cutting tool, that produces high precision with less runout. Available in various sizes to meet specific production
Th Series MULTI TASKING MACHINING CENTERS
Th Series MULTI TASKING MACHINING CENTERS MULTI TASKING 5-AXIS & UNIVERSAL MACHIN JUARISTI undergoing a deep development of their boring and milling centers, sets a new milestone with the manufacturing
Compact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750
[ E[M]CONOMy] means: Compact technology for maximum efficiency EMCOMILL 1200 and EMCOMILL 750 3-axis CNC milling machines for the machining of small to medium lot sizes EMCOMILL 1200 Test UNI ISO 10791-7
SAMSUNG Machine Tools
NC Unit Specifications / FANUC Series Item Specification 0i-TD 32i-B i SAMSUNG Machine Tools PL 2000Y/SY PL 2500Y/SY SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea
Turning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
LIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
HARDINGE Precision Tooling Systems for Mills
www.hardinge.com HARDINGE Precision Tooling Systems for Mills Precision Tool Holding Systems for Mills Hardinge. Solid since 890. At Hardinge, our mission is to provide the Best Value in workholding products
Clamping Tools The most effective clamping tool for individual applications an overview.
05/2012 Clamping Tools The most effective clamping tool for individual applications an overview. By Thomas Oertli There is no best clamping tool. However, we have developed the most effective and therefore
Series. 150,000 min -1 (0.5MPa) 25W. High Speed 150,000min -1 Suitable for Small Diameter Milling AIR TURBINE SPINDLE. Max. Max.
AIR TURBINE SPINDLE Series Max. 150,000 min -1 High Speed Suitable for Small Diameter Milling Large Variety of Tapers Available SHANK M2040 (Straight), BT30 / 40 / 50 HSK E25 / 32 / 40 / 50 HSK A63 / F63
Technical data P.155. Cutting data P.160 A63-SLK12-75 CF N : 16000min -1 F : 3200 mm V : 301m f : 0.1mm/flute R3 Carbide ball endmill 2flutes
REFERENCE Shrink-fitting quill for grinding Technical data P.155 Maintenance P.154 P.156 Safety mark A short insertion length may cause the holder to be damaged when the cutter is inserted into it. Always
Weeke CNC Machining Center, Model BP-140 ATC Optimat
Weeke CNC Machining Center, Model BP-140 ATC Optimat Weeke's BP-140 is a truly industrial machine designed primarily for pointto-point boring and machining of flat components without special workpiece
Live & Static Tooling. Mori Seiki SL 403, SL 603, VL553II MC
Live & Static Tooling Mori Seiki SL 403, SL 603, VL553II MC Mori Seiki Live and Static Tools for SL403, SL603 VL553II MC Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and
Constant Face Driver CoE. CoE: Retrofitting has time-out. Turning and milling in one set-up. Benefits and areas of application
Benefits and areas of application 11 CoE: Retrofitting has time-out Best for efficiently turning of workpieces along their entire Developed according to the construction set principle, length without re-clamping
P R O D U C T C A T A L O G.buckchuck.com www
P R O D U C T C A T A L O G www.buckchuck.com If a chuck s a chuck, then Why a Buck! Depth. In Experience. In Heritage. In Product. How about 75 years? That s how long Buck Chuck Company has engineered
bcprecision Devices, Inc. HYDRAULIC ARBORS AND CHUCKS
UNEQUALED WORK HOLDING ACCURACY for: grinding; balancing; inspection; boring; facing; reaming; drilling; turning; shaving; hobbing and honing b SQUARENESS r CONCENTRICITY f PARALLELISM e ROUNDNESS v ALIGNMENT
Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
MASTER CATALOGUE. Beyond EADE Solid Ceramic End Mills.
MASTER CATALOGUE Beyond EADE Solid Ceramic End Mills Beyond EADE Solid Ceramic End Mill Primary Application EADE Solid Ceramic End Mills offer higher productivity and tool life in roughing nickel-based
High Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
SE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
ganeshmachinery.com (US Only) Fax: Plummer St, Chatsworth, CA 91311
ganeshmachinery.com 818.349.9166 888-542-6374 (US Only) Fax: 818-349-7286 20869 Plummer St, Chatsworth, CA 91311 i ii The Lineup Introduction 02 GENTURN SL-20Y2 04 GENTURN SL-42Y2 06 GENTURN 32-NCY 08
BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant