SELF DRILLING PANEL FASTENER CATALOG 2012

Transcription

1 SELF DRILLING PANEL FASTENER CATALOG 2012 Metal Roofing Fasteners and Accessories for exposed fastener and concealed fastener panels. Products for residential and commercial metal roofing. Steel Building fasteners and components for steel frame building construction. Post Frame Construction fasteners and components for wood frame building construction. Products for agricultural and commercial post frame buildings. Commercial and Flat Roofing fasteners and accessories for industrial, residential and commercial flat roofing. Products for built up roofing and tapered roofing systems. Shingle and Tile Roofing fasteners and accessories for asphalt shingle and clay/concrete and shake tile roofing. Interior /Exterior Construction fasteners and accessories for general construction. Fasteners for sheetrock, steel framing, exterior siding, masonry construction, decking, flooring and more. HVAC, Electrical and Plumbing fasteners and components for air conditioning duct manufacturing and installation, hanging electrical and plumbing fixtures, pipe flashings, and radiant flooring. Miscellaneous multi-use building components and fasteners for residential, commercial, agricultural, industrial and manufactured buildings and shelters.

2 Order entry or product inquires: Toll Free Phone: Toll Free Fax: Website: Thank you for downloading the 2012 Direct Metals, Inc. guide to self drilling roofing fasteners. The following pages provide descriptions, images and information on our wide variety of self drilling fasteners for screw through metal panel installation to metal and steel substrates. Direct Metals, Inc. has over 30 years experience in bringing the best accessories and fasteners for new construction and retrofit to market. We are a favorite source for wholesale and retail suppliers of building products as well as many OEM building and metal roofing panel manufacturers. Direct Metals, Inc. has approved and tested products that are designed to offer the best mix of quality and cost with an emphasis on American Made and Buy American Plan products. Corporate address / Southeast Main Service Center: Direct Metals, Inc East Street N. Ft Myers, FL Phone: Fax: Manager andrew@directmetalsinc.com Midwest/Northeast Main Service Center: Direct Metals of Indiana 1800 Jim Neu Drive, Suite 2 Plymouth, IN Phone: Fax: Manager hal@directmetalsinc.com We are proud to have over 1000 distributors across the United States of America. These distributors are serviced through our warehousing locations strategically placed to offer fast service and low shipping cost on our quality products. Our product mix is comprised of tested materials that have proven themselves over time to stand up to harsh climates and return excellent value for your money. We are dedicated to providing fasteners and accessories that are easy to install and that will extend the life of your building, roof, or structure. Thank you for supporting our distributors and asking your current suppliers if they provide Direct Metals, Inc. products. Please feel free to contact our office to find a distributor in your area. Feel free to call our main office if you have any questions or need you need help choosing the right products for your job. Direct Metals, Inc. sells materials to distributors and manufacturers only. Sorry, we do not sell directly to contractors, homeowners, or installers; however we can assist you in finding the right product and distributor.

3 #12 TEKS SELF DRILL FASTENER TEKS3 - MTM The original TEK screw with a Worldwide reputation for fast drilling quality self drilling points for metal to metal applications up to 8 gauge (SD2). Full Climacoat 1000 hour+ coating, painted fasteners available with 35 year warranty powdercoat paint. Most sizes Made in the U.S.A. Hex washer head with bonded E.P.D.M. washer available or Maxi-Seal cupped style head with seal washer in limited sizes. Packaged 250 pcs / bag or bulk packaging please specify TEK2 Steel TEK3 Steel TEK5Steel 35 Year Paint Warranty 24GA:243 16GA: :1507 Shear: GA:283 14GA:1063 3/16:3300 Tensile: GA:848 12GA:1631 1/4:5059 Torsional: 92 inlbs #12-24 TEKS HEAVY GAUGE TEKS5 - MTM With bonded E.P.D.M. washer. The original TEK5 screw With a worldwide reputation for fast drilling quality self drilling points for metal to metal replacement applications up to 1/2 thick steel. Full Climacoat 1000 hour+ coating, painted fasteners available with 35 year warranty powdercoat paint. Most sizes Made in the U.S.A. 5/16 HWH. Assembled w/washer. METAL TO METAL SELF DRILL FASTENERS #10 x 3/4 TEK3 3,000 DMI #10 x 1-1/2 TEK3 2,500 DMI #12 x 3/4 TEK3 3,000 DMI #12 x 1 TEK3 3,000 DMI #12 x 1-1/4 TEK2 2,500 DMI #12 x 1-1/2 TEK2 2,000 DMI #12 x 2 TEK3 1,500 DMI #12 x 3 TEK3 1,000 DMI /4-14 x 4 TEK3 500 DMI #12 x 7/8 TEK4 3,000 DMI /4-28 x 3 TEK5 1,000 DMI /4-28 x 4 TEK5 500 DMI /4-28 x 5 TEK5 250 DMI /4-28 x 6 TEK5 250 DMI /4-28 x 8 TEK5 150 DMI Washered box quantities and part numbers shown. All HWH TEKS self drill screws are also available without washers for applications such as steel framing. #12 x 1-1/4 TEK5 2,500 DMI #12 x 1-1/2 TEK5 2,000 DMI #12 x 2 TEK5 1,500 DMI #14 x 3 TEK5 1,000 DMI #14 x 5 TEK5 250 DMI #14 x 6 TEK5 250 DMI #14 x 8 TEK5 150 DMI Washered box quantities and part numbers shown. #1/4-14 x 7/8 DMI TEKS MAXISEAL STITCH SD#1 With cupped head and seal washer. Full Climacoat 1000 hour+ coating, painted fasteners available with 35 year warranty powdercoat paint. Metal to Metal, Panel to Panel stitch applications up to 18 ga. 5/16 HWH Drive. Also available in standard HWH bonded washer style. Packaged 250 pcs / bag and 3,000 pcs / box Part# DMI Bulk or 250/bag #12-14 DMI 304 STAINLESS STEEL CAPPED HEAD SELF DRILL - MTM With a 304 series stainless steel capped head with a lifetime warranty against red rust. Thick E.P.D.M. seal washer and fully coated Climaseal shank. TEKS self drilling points for original installation. Metal to Metal applications up to 8 ga steel. Made in the U.S.A. Available with 35 year warranty powdercoat paint. 1/4-14 x 7/8 SSC SD#1 Stitch available for panel to panel applications. See TEKS self drill for specifications. Packaged 250 pcs / bag #12 x 1 TEK3 2,500 DMI #12 x 1-1/4 TEK2 2,500 DMI #12 x 1-1/2 TEK2 2,000 DMI #12-24 x 2 TEK5 1,000 DMI #14 x 7/8 TEK1 2,500 DMI Stitch #14 X 1-1/8 TEK1 2,000 DMI #14 X 1-1/4 TEK3 2,000 DMI STAINLESS STEEL TEKS SD #3 SCREWS Full 410 Stainless steel self drilling fastener with Climacoat coating for corrosion protection. Suitable for installation of stainless steel and aluminum panels to steel or aluminum substrates. Metal to metal applications up to 8 gauge 5/16 Hex Drive. Available with or without bonded E.P.D.M. washers. Available with 35 year warranty powdercoat paint. Bulk packaging. Please note that 410 stainless steel is not corrosion proof. #10 x 3/4 TEK3 4,500 DMI #10 x 1-1/2 TEK3 2,500 DMI #12x 1 TEK3 2,500 DMI #12 x 1-1/4 TEK3 2,500 DMI #12 x 1-1/2 TEK3 2,000 DMI #12 x 2 TEK3 1,500 DMI #14 x 1 TEK3 2,500 DMI #14 x 1-1/4 TEK3 1,500 DMI #14 x 2 TEK3 1,000 DMI #14 x 3 TEK3 500 DMI STAND-OFF TEKS SELF DRILL FASTENERS FOR INSULATED PANELS New technology allows these TEKS fasteners to be manufactured with two shaft diameters to create a physical distance (stand-off) between fastened materials after installation. Compressing insulation reduces its R-value, Stand-off TEKS preserve a specified stand-off distance and reduces the amount of insulation compression. Reduces panel compression dimples and has a built-in anti backout thread. Available in Maxi-seal and 304 Stainless Steel head styles in popular metal building fastener sizes. PG 14 TO FIND A DISTRIBUTOR CALL

4 METAL TO METAL SELF DRILL FASTENERS #12-14 IMPAX SELF DRILL AND IMPAX SEALER SD - MTM With bonded E.P.D.M. washer. Mechanical galvanized plating plus VistaCoat longlife full fastener coating gives the full fastener corrosion protection. Precision forged self drilling point for metal to metal fastening of metal panels to steel substrates up to 8 gauge. Available with HWH bonded head style or Sealer cupped head style with E.P.D.M. seal washer. HWH parts are also available without washer for steel framing and concealed fastening applications. 5/16 Hex Drive. Packaged 250 pcs / bag Pull Over Lbs Ult Buy American B.A.P: YES 22ga: ga:1539 Shear: ga:692 14ga:1010 Tensile: 2900 #12 x 3/4 SD3 2,500 DMI2V2361EDF #12 x 1 SD2.5 2,500 DMI2V4611FGF #12 x 1-1/4 SD3 2,500 DMI2V4636FGF #12 x 1-1/2 SD2 2,000 DMI2V4721FGF #12 x 2 SD2 1,500 DMI2V4777EDF #12 x 2-1/2 SD2 2,000 DMI2S4902EDF #12 x 3 SD2 1,500 DMI2S4952EDF #12 x 4 SD2 1,000 DMI2S4981EDF #14 X 7/8 STSD1 2,500 DMI2V5078FFF Washered box quantities and part numbers shown. All HWH Impax self drill screws are also available without washers for applications such as steel framing. 24ga: ga:724 Torsional: 92 inlbs #12-24 IMPAX HEAVY GAUGE SD#5 - MTM With bonded E.P.D.M. washer. Mechanical galvanized plating plus VistaCoat longlife full fastener coating gives the full fastener corrosion protection. Precision forged self drilling point for metal to metal fastening of metal panels to steel substrates up to 1/2 thick. Buy American Plan. 5/16 HWH Drive. Packaged 250 pcs / bag #1/4-14 x 7/8 IMPAX SEALER STITCH #1 With cupped head and seal washer with VistaCoat coating. 5/16 HWH Drive. Metal to Metal, Panel to Panel stitch applications up to 18 gauge. Packaged 250 pcs / bag and 2,500 pcs / box #12-14 MAC 304 STAINLESS STEEL CAPPED HEAD MTM With a 304 series stainless steel capped head with a 20 year warranty against red rust. E.P.D.M. seal washer and zinc plated steel shank. Metal to Metal applications up to 8 gauge steel for SD#3 and up to 3/16 thick steel SD#4.5. See Impax SD Specifications. Packaged 250 pcs / bag #12-14 ZAC SELF DRILL - LONGLIFE - MTM With ZAC 20 warranty longlife head for superior corrosion protection on the head of the fastener. Thick E.P.D.M. seal washer and galvanized shank plating. Precision forged self drilling point for metal to metal applications up to 8 gauge steel. 5/16 or 3/8 Drive depending on size. See Impax Self Drill for specifications. 1/4-14 x 7/8 SD1 for panel to panel stitch up to 18 gauge. Packaged 250 pcs / bag #12 x 1-1/4 SD5 2,500 DMI2S4668EDF #12 x 1-1/2 SD5 2,000 DMI2S4741EDF #12 x 2 SD5 1,500 DMI2A0841EDF Washered box quantities and part numbers shown. All HWH Impax HG self drill screws are also available without washers for applications such as steel framing. Part# DMIV5078FFF #12-24 ZAC HEAVY GAUGE SD#5 - MTM With ZAC 20 warranty longlife head for superior corrosion protection on the head of the fastener. Thick E.P.D.M. seal washer and galvanized shank plating. Precision forged self drilling point for metal to metal fastening of metal panels to steel substrates up to 1/2 thick. Buy American Plan. 3/8 HWH Drive. Packaged 250 pcs / bag #12-24 x 1-1/2 1,500 / box Part# DMI2S4742FLF DMI 304 SS HEAD SELF DRILL RIDGED INSULATION FASTENER - MTM The original self-drilling fastener designed specifically for exterior rigid insulation applications. Unique rider section stops panel jacking, point burnout and breakage. Washer seals even when driven at a 12 deg angle. With a 304 series stainless steel capped head with a lifetime warranty against red rust. Available with 35 year warranty powdercoat paint. See TEKS self drill for specifications. Available for order in full boxes only. #12 x 1 SD3 2,500 DMI2S4530FAF #12 x 1-1/4 SD3 2,000 DMI2S4650FAF #12 x 1-1/2 SD3 1,500 DMI2S4690FAF #12-24 x 1-1/4 SD5 2,000 DMI2S4672FAF #14 x 7/8 Stitch SD1 2,000 DMI2S4770FAF #12x 1 SD3 2,500 DMI2S4591FLF #12 x 1-1/4 SD3 2,000 DMI2X4646FLF #12 x 1-1/2 SD3 1,500 DMI2X4731FLF #12 x 2 SD3 1,000 DMI2S4761FLF #12 x 2-1/2 SD3 1,000 #12 x 3 SD3 750 #14x7/8 Stitch SD1 2,000 DMI2S5031FMF #12 x 1-7/8 SD3 1,500 DMI #12 x 2-3/8 SD3 1,000 DMI #12 x 3-1/4 SD3 750 DMI #12 x 4 SD3 500 DMI TO FIND A DISTRIBUTOR CALL PG 13

5 .357 (#21) TAPPING - REPLACEMENT FASTENER With bonded washer and Zinc plating. Entry level replacement fastener for replacement of large diameter fasteners such as old #14, #17 and #18 fasteners. Metal to wood and metal to metal applications. Pre-drill may be required see your sales person for specifications. Available in Bulk only / box Part# DMI8A357TZ-IMP or.318 x 1 1,500 / box Part # DMI8A318TZ-IMP 1/4-14 HEAVY DUTY IMPAX - REPLACEMENT FASTENER - MTM With bond seal washer and full VistaCoat coating. Precision forged self drilling points for metal to metal replacement and original installation. Metal to Metal applications up to 8 ga (SD2). Entry level replacement fastener for old #8, #10, and #12 self drilling fasteners. SD#3 and SD#4 have higher drilling capacities up to and including 1/4 thick steel. 5/16 or 3/8 Drive Packaged 250 pcs / bag Pull Over SD3 SD2 SD4 Buy American B.A.P: YES 22ga: ga: ga: ga:1913 Shear: ga:816 14ga: ga: ga:1061 Tensile: ga:884 16ga:887 16ga:903 16ga:707 Torsional:150inlbs REPLACEMENT FASTENERS #14 x 3/4 SD3 2,500 DMI2S5010GBF #14 x 1 SD2 2,000 DMI2S5171GBF #14 x 1-1/4 SD3 2,000 DMI2S5201GBF #14 x 1-1/2 SD3 2,000 DMI2S5251GBF #14 x 2 SD3 2,000 DMI2S5351GBF #14 x 2-1/2 SD3 1,500 DMI2S5381GBF #14 x 3 SD3 750 DMI2S5451GBF 1/4-20 x 4 SD4 1,000 DMI2S5621GBF 1/4-20 x 5 SD4 750 DMI2S5641GB 1/4-20 x 7 SD4 500 DMI2S5671GB Washered box quantities and part numbers shown. All impax Heavy Duty self drill screw are also available without washers for applications such as steel framing. 1/4-14 TEKS HEAVY DUTY - REPLACEMENT FASTENER - MTM The original TEK screw with a worldwide reputation for fast drilling quality self drilling points for metal to metal replacement and original installation. Metal to Metal applications up to 8 ga (SD2). Full Climacoat 1000 hour+ coating, most sizes Made in the U.S.A. Replacement fastener for old #8, #10, and #12 self drilling fasteners. TEKS5 have higher drilling capacities up to and including 1/2 thick steel. Packaged 250 pcs / bag or bulk packaging please specify. Pull Over TEK3 Steel TEK3 Steel TEK5Steel Buy American B.A.P: MOST #14 x 3/4 TEK3 3,000 no washer #14 x 1 TEK3 2,500 DMI #14 x 1-1/4 TEK3 2,000 DMI #14 x 1-1/2 TEK3 1,500 DMI #14 x 2 TEK3 1,000 DMI #14 x 3 TEK3 750 DMI /4-28 X 3 TEK5 1,000 DMI /4-28 x 4 TEK5 500 DMI /4-28 x 5 TEK5 250 DMI /4-28 x 6 TEK5 250 DMI /4-28 x 8 TEK5 150 DMI ga: GA:141 16GA:880 16GA:607 26ga:637 24GA:231 12GA:1877 3/16: ga:800 22GA:293 3/16 :4550 1/4:5059 Shear: Tensile: Torsional:150inlbs Washered box quantities and part numbers shown. All TEKS Heavy Duty self drill screws are also available without washers for applications such as steel framing. 1/4-14 ZAC SD HEAVY DUTY - REPLACEMENT FASTENER - MTM With ZAC 20 warranty longlife head for superior corrosion protection on the head of the fastener. Thick E.P.D.M. seal washer and galvanized shank plating. Precision forged self drilling points for metal to metal replacement and original installation. Metal to Metal applications up to 8 gauge steel. Long life replacement fastener for old #8, #10, and #12 self drilling fasteners. Buy American Plan. 5/16 SD#3 or 3/8 Drive SD#2. See Impax Heavy Duty Self Drill for specifications. Packaged 250 pcs / bag 1/ STAINLESS STEEL CAPPED HEAD HEAVY DUTY - REPLACEMENT FASTENER - MTM With a 304 series stainless steel capped head with a lifetime warranty against red rust. Thick E.P.D.M. seal washer and fully coated Climaseal shank. TEKS self drilling points for metal to metal replacement and original installation. Metal to Metal applications up to 8 gauge steel. Long life replacement fastener for old #8, #10, and #12 self drilling fasteners. See TEKS Heavy Duty Self Drill for specifications. Available with 35 year warranty powdercoat paint. Made in the U.S.A. Packaged 250 pcs / bag #14 x 1-1/4 SD3 2,000 DMIS5211FM #14 x 1-1/2 SD2 2,000 DMIS5287FM #14 x 1-1/4 TEK3 2,000 DMI PG 12 TO FIND A DISTRIBUTOR CALL

6 TEKS SELECT SELF DRILL SCREWS FOR ALUMINUM New selectively hardened self drilling fasteners for attaching similar or dissimilar metals with Grade 5 bolt performance. Full Climaseal ACR allows TEKS Select fasteners to out perform other selectively hardened fasteners in salt spray corrosion testing. Installs in half the time required for nuts and bolts and replaces four installation steps with one. Made in the U.S.A. Full box orders only, not available with washers or painted. Less expensive alternative to stainless steel self drilling screws. Designed for aluminum framing, solar attachment and the curtain wall industry. SPECIALTY & STAINLESS SELF DRILL FASTENERS #10 x 3/4 TEK3 5,000 DMI #12 x 7/8 TEK3 5,000 DMI #12 x 1 TEK3 4,000 DMI #12 x 1 PFH TEK3 4,000 DMI #12 x 1-1/2 TEK3 2,500 DMI #12 x 2 TEK3 2,000 DMI #14 x 1 TEK3 2,500 DMI #14 x 1-1/2 TEK3 2,000 DMI /4-20 x 1-1/8 TEK4 2,000 DMI /4-20 x 1-1/2 TEK4 2,000 DMI /4-20 x 2 TEK4 1,500 DMI /4-20 x 2-1/2 TEK4 1,000 DMI SX 304 STAINLESS STEEL BI-METAL SELF DRILL - MTM If you are looking for the highest in corrosion resistance in a self drilling screw look no further. The fused BI-Metal self drilling point allows used to achieve the corrosion resistance offered by 304 stainless steel without having to pre-drill your fastener. Head and shank of screw are 304 Series Stainless Steel available with or without a washer. Warranty against red rust on head and body of screw. 5/16 HWH drive. SX5 304 SS Bi-Metal SD#3 drill thick steel SX SS Bi-Metal SD#5 drill thick steel SX SS Bi-Metal stitch SD#1 drill up to 18 gauge steel. Pull Over Steel SD3 Steel SD5 BUY AMERICAN PLAN 12GA: GA:1220 Shear: ga:646 14GA: 795 3/16 :3150+ Tensile: ga: GA: 582 1/4 : Torsional: 70 inlbs #12 x 1-1/4 SD3 500 DMI #12 x 1-1/2 SD3 500 DMI #12 x 1-5/8 SD3 500 DMI #12 x 2-1/8 SD3 250 DMI #12 x 3-1/8 SD3 250 DMI #12 x 3-3/4 SD3 250 DMI #12 x 4-1/4 SD3 250 DMI #12 x 5-1/2 SD3 250 DMI #12 x 1-9/16 SD5 500 DMI #12 x 1-7/8 SD5 500 DMI #12 x 2-1/2 SD5 250 DMI #12 x 3-1/4 SD5 250 DMI #12 x 4 SD5 250 DMI #12 x 5-1/2 SD5 100 DMI #12 x 6-5/8 SD5 100 DMI #12 x 1 Stitch SD1 250 DMI #14 x 1-1/8 Stitch1 500 DMI All above packaged 250/bag or bulk. SECURITY/LOW PROFILE IRIUS DRIVE SX 304 STAINLESS STEEL BI-METAL SELF DRILL - MTM Security, long life, ease of installation and low profile architectural appearance all available in one fastener. The Irius Bi-Metal fastener uses a unique under the head driver to offer confidence that a key to your building is not available in every tool box. The fused BI-Metal self drilling point allows used to achieve the corrosion resistance offered by 304 stainless steel without having to pre-drill your fastener. Head and shank of screw are 304 Series Stainless Steel available with or without a washer. Warranty against red rust on head and body of screw. Irius driver is only available with purchase of Irius Bi-Metal fasteners. Available painted to match your panel color. Packaged 250 pcs/bag or in bulk #12 x 1-1/4 SD3 500 DMI #12 x 1-1/2 SD3 500 DMI #12 x 1-5/8 SD3 500 DMI #12 x 2-1/8 SD3 500 DMI #12 x 1-9/16 SD5 500 DMI #14 x 1 Stitch SD1 500 DMI Installation Tool 1 DMI2IDRIVE Irius 304 SS Bi-Metal SD#3 Drill t Irius 304 SS Bi-Metal SD#5 Drill t Irius 304 Bi-Metal Stitch SD#1 Drill up to 18 ga #10 ECLIPSE LOW PROFILE SELF DRILL With low profile head and zinc plating. With E.P.D.M. sealing washer. Metal to metal applications, Torx Drive T-35. Packaged 500 pcs / bag #12-14 x 1-1/4 for steel substrates up to 8 gauge steel. #14 x 7/8 for stitch lap panel overlap applications up to 18 gauge steel. Allow up to 7 business days for delivery. #12 x 1-1/4 SD3 2,500 DMI312B125DMT #14 x 4/8 SD1LAP 2,500 DMI314B87DLTO TO FIND A DISTRIBUTOR CALL PG 15

7 SPECIALTY FASTENERS RIVETS, NUTSETTERS HEX NUT-SETTERS AND LSC DRIVERS Long spring clip drivers and magnetic nut-setters. DMI suggests using LSC Drivers, (Long spring clip). The LSC drivers offer a superior driving experience holding the fasteners secure while taking less paint off the heads of the fasteners. The LSC drivers use a pressure spring instead of a magnetic disc to hold the fastener making them the choice for driving stainless steel and other non-magnetic hex head fasteners. We also offer a variety of Phillips, Square, and Combo Drive s for concealed fasteners. POLYCARBONATE PANEL TO WOOD FASTENER Stainless Steel 304 no red rust construction. Includes sealing washer and wings to pre-drill polycarbonate panels. Wings pre-drill to help allow for expansion and contraction of polycarbonate panels. #12 diameter x 1-1/2 standard. 1-1/2, 2 and 2-1/2 length special order. POLYCARBONATE PANEL OVERLAP FASTENER GROMMET SEAL STAINLESS Stainless Steel 304 no red rust construction. Used for panel overlaps of polycarbonate and fiberglass panels. Hex head machine screw with rubber grommet that seals around top and bottom of panel penetrations. 3/8 x 1 standard size. 1/4 x 1-1/4 special order. POLYCARBONATE PANEL TO METAL FASTENER Oversized #14 x 1-1/4 self drill #3 fasteners with an oversized 1 diameter washer. This fastener is for installation of polycarbonate panels to light to medium gauge metal substrate up to 8 ga steel. #14 x 7/8 stitch available for Polycarbonate panel to metal panel stitch applications up to 18ga. Large 1-1/8 diameter E.P.D.M. bonded washer was allows you to do pre-drill your expansion relief holes in the Polycarbonate panels and seal the larger diameter holes with confidence. Full silver anti-corrosion coating. 100 pcs / bag 1/4 Hex LSC 10/100 DMI3SSHL14 5/16 Hex LSC 10/100 DMI3SSHL516 3/8 Hex LSC 10/100 DMI3SSHL38 1/4 Hex Magnet 10/100 DMI3LMSHL14 5/16 Hex Magnet 10/100 DMI3LMSHL516 3/8 Hex Magnet 10/100 DMI3LMSHL38 #2 Phillips x 2-3/4 10/100 DMI3QT322P #2 Square x 1-5/16 10/100 DMI3QT802S #3 PH / #2 SQ combo 10/100 DMI9APE493 T-25 x 2-3/4 10/100 DMI3T25W275 IRIUS DRIVER 1 DMI2DRIVER #12 x 1-1/2 2,000 DMIPC912112S Special order parts below, extended lead time #12 x 1-1/4 2,500 DMIPC12114S #12 x 2 1,500 DMIPC12200S #12 x 2-1/2 1,000 DMIPC12250S FULL CARTON ORDERS ONLY 3/8 X 1 Call DMI23810PG 1/4 X 1-1/ DMI310F100N FULL CARTON ORDERS ONLY 1/4-14 x 1-1/2 SD3 1,000 DMI3PC112LW 1/4-14 x 7/8 SD1ST 1,000 DMI3PC078LW 100 PIECES PER BAG AVAILABLE IN SILVER COLOR ONLY RIVETS - FULL 304 STAINLESS STEEL MTM #43 Stainless steel rivets with stainless rivet and mandrel. Stainless rivets are compatible with galvanized, galvalume, aluminum, copper, and stainless steel panels. #43 grip range is.126 to.187, #44 grip range is Available painted to match your panel color. Standard #43 stock colors include: Ash Grey, Burnished slate, Caribbean Blue, Cocoa Brown, Charcoal, Dark Green, Light Stone, Red, Tan, White, Bright White. Stainless Steel Rivets in stock in mill finish stainless. Packaged 250 pcs / bag or boxes of 5000 pcs 1/8 Rivets #43 Part #DMI2L1290, #44 Part #DMI2L1300, and #46 Part #DMI2L460S BI-METAL CLADDING FASTENERS- FULL 304 STAINLESS STEEL Available for order various types and sizes of 304 stainless steel fasteners for metal cladding panels. SX TORX low profile self drill full 304 SS bimetal drill point screws for attaching steel, stainless and aluminum to thin to medium gage metal. TW-S low profile full 304 SS for attaching cladding panels to timber battens, aluminum and steel light gage framework. SLA bimetal low profile for fastening aluminum composite panels to aluminum framing. All of the above carry a 25 year warranty against red rust. We also feature a selection of AP rivets for cladding panels to aluminum or steel subframes, and TSU Blind HPL fasteners for brackets, straps, and clips. PG 10 TO FIND A DISTRIBUTOR CALL

8 METAL BUILDING BRACING & ACCESSORIES BRACING CABLE STRAND Class A galvanized EHS wire for cable bracing applications in metal buildings. Available in 2500 lnft and 5000 lnft spools. Currently a special order item. Size Lnft/Spool Part# 1/ DMC7NS / DMC7NS / DMC7NS / DMC7NS CABLE BRACING KITS Structural reinforcement cable bracing kits. Kits come complete with welded eyebolt, nut, hillside washer, and flat washer. Most sizes available zinc plated. BRACE-GRIP CABLE GRIP DEAD ENDS Develops 100 percent or more of the published rated breaking strength of the strand for which it was designed. Lighter, easier to handle Stranded steel cable offers greater tensile strength then an equivalent sized threaded rod Reduces costs by cutting installation time Eliminates the need for costly machinery Easily applied - no special tools needed No cutting or preparation it arrives ready to apply Accommodates 1/4" through 3/4" diameter strand 1/2 x 9 50 DMI3CC129ZP 5/8 x 8 50 DMI6CC588ZP 3/4 x 8 25 DMI3CC349XX 1 x 8 25 DMI3CC109XX 1/4 50 DMI5BGS14 5/16 50 DMI5BGS516 3/8 50 DMI5BGS38 1/2 25 DMI5BGS12 5/8 25 DMI5BGS58 THREADED ROD Designed for hanging, connecting, clamping, and supporting in plumbing, heating, and metal building tie applications. Steel available in various sizes by special order only, minimum does apply. BRACE-GRIP DEAD-END FOR ROD SYSTEMS Color coded orange to identify use for rod systems only Develops 100 percent or more of the published rated breaking strength of the rod for which it was designed Unique design for better performance No costly machinery or special tools needed No cutting or preparation it arrives ready to apply Requires no threading or painting, reduced costs due to use of smaller rods Accommodates 1/4" through 3/4" diameter rod Conforms to ASCE testing A325 STRUCTURAL BOLTS AND NUTS A 325 Structural bolts for metal building construction. Standard A325 bolts and nuts are plain black, zinc plated and galvanized available by special order only. Other sizes and styles available for order. WEDGE ANCHOR BOLTS Used for anchoring points in concrete slab construction. Wedge anchor bolts with zinc plating. Assembled with nut and washer. High quality import. Many other sizes not listed are available for special order. 1/4 Call 3/8 Call 1/2 Call 1/4 50 DMI5BGRG2580 5/16 50 DMI5BGRG2582 3/8 50 DMI5BGRG2583 1/2 25 DMI5BGRG2585 5/8 25 DMI5BGRG1587 9/16 25 DMBGRG2586 Available Sizes Part# 1/2 x 1 1/4 Plain with nut DMI4A /8 x 1 3/4 Plain with nut DMI4A /8 x 2-1/4 Plain DMI4A /4 x 2 Plain with nut DMI4A /4 x 2-1/2 Plain DMI4A /2 x 5-1/2 125 DMI4A12512Z 1/2 x DMI4A12700Z SAMMYS THREADED ROD ANCHORS VERTICAL SUSPENSION Used for hanging threaded rod. Used in the installation of fire suppression systems, A/C ducts, lighting and more. Sammys for Structural Steel and Bar Joist Vertical Applications. Our manufacturing process integrates the Original Sammy technology with the Original TEKS self-drilling, self-tapping fastener. Direct attachment provided by Sammys reduces installation and material cost by using only one product to hang threaded rod. No pre-drilling required. UL listings and FM approvals are available. A wide range of fastener lengths for steel thicknesses ranging from 20 gauge to ½" thicknesses are available for ¼", ⅜", ½", M8 and M10 threaded rod. Rod Size/Size Part# 1/4 DSTR100 1/4-20 x 1 TEK3 DMI /4 DST200 1/4-20 x 2 TEK3 DMI /4 TEK500 #12-24 x 1-1/4 TEK5 DMI /8 DSTR1 1/4-20 x 1 TEK3 DMI /8 DST20 1/4-20 x 2 TEK3 DMI /8 DSTR112 #12-24 x 1-1/2 TEK5 DMI /2 DSTR1.0 1/4-20 x 1 TEK3 DMI /2 TEK5.0 #12-24 x 1-1/2 TEK5 DMI Stainless Steel SAMMYS Rod Size/Size Part# 3/8 DST10SS 1/4-20 x 1 TEK3 DMI PG 16 TO FIND A DISTRIBUTOR CALL

9 COLOR CHART DIRECT METALS, INC. offers the VistaCoat Premium paint system on most of our metal roofing and metal building fasteners. VistaCoat fasteners are available with a full coat paint system. VistaCoat was developed to provide corrosion resistance on the whole fastener including the washer. VistaCoat dramatically reduces the amount of paint taken off the head of the screw during installation providing a professional appearance after installation. Vista coat has built in UV resistance to combat paint fading and provides paint fade performance consistent with the top panel finishes in the industry. Vista coat is available with no up charge on most Impax, and ZAC Impax fasteners in our new standard colors. The performance of the VistaCoat paint system has been tested against our best competitors products. This 1000 hour salt spray testing was performed by an independent test lab. The testing showed a considerable performance advantage of our VistaCoat finish vs. the competitors mechanical galvanized and claimed 1000 hour coatings. Direct Metals, Inc. also offers the P3 powder coated head paint system on many of the TEKS self drilling fasteners. This P3 powder coated head offers the protection of a 35 year limited warranty. Most P3 powder coated head fasteners also have a Climaseal 1000 hour tested shank coating. The color chart to the right is representative of our standard color offerings. Colors may vary from actual product due to color variations in the catalog printing process. Actual colored product samples are available on request. 014 Bright White 001 White 348 Std Bone White 330 Warm White 816 Sierra White 385 Patina 052 Teal Green 660 Hemlock 232 Evergreen 732 Denali Green 422 Taupe/Clay 109 Sand Beige 415 Beige 248 Light Stone 548 Ivory 928 Terracotta 102 Crimson Red 798 Hartford/Fern 925 ClassicGreen 228 Forest Green 020 Tan (STD) 230 Desert Brown 110 Cocoa Brown 374 Dark Brown 537 Medium Bronze 890 Red (STD) 691 Barn Red 074 Colonial Red 393 Burgundy 432 Blue Teal 578 Old Town Gray 302 Pearl Gray 850 Ash Gray 324 Dark Bronze 042 Burnished Slate 023 Gloss Black 507 Matte Black 421 Navy 843 Gallery Blue 012 C./H. Blue 696 Pewter Gray 091 Zinc Gray 051 Charcoal Gray 416 Slate Gray Metallic Paints > 1161 Silver 1160 Champagne 1162 Zactique 1116 Copper Penny PG 55 TO FIND A DISTRIBUTOR CALL

10 tp Distributor order entry or product inquires: Toll Free Phone: Toll Free Fax: Website: We are proud to have over 1000 distributors across the United States of America. These distributors are serviced through our warehousing locations strategically placed to offer fast service and low shipping cost on our quality products. Corporate address / Southeast Main Service Center: Direct Metals, Inc East Street N. Ft Myers, FL Phone: Fax: Manager andrew@directmetalsinc.com Your Direct Metals, Inc. distributor is: Midwest/Northeast Main Service Center: Direct Metals of Indiana 1800 Jim Neu Drive, Suite 2 Plymouth, IN Phone: Fax: Manager hal@directmetalsinc.com