SUBMITTAL TRANSMITTAL

Transcription

1 SUBMITTAL TRANSMITTAL GENERAL CONTRACTORS 835 GIL HARBIN INDUSTRIAL BLVD. VALDOSTA, GA (229) Fax (229) DATE June 1, 2010 JOB NO TO: BES Incorporated 2712 Bull Street Beaufort, SC P ATTENTION RE Mr. Robert Beach Enclave Force Protection Access Control Point Contract W9128F-09-C-0051 Ft. Gillem, Georgia Submittal Number SD-05 Description Cold Formed Metal Calculations See Form 4025 Attached COPY TO File SIGNED If enclosures are not as noted, kindly notify us at once.

2 ClarkWestern material certification - code approvals and performance standards: ClarkWestern s products meet or exceed these applicable performance standards. Structural framing standards Interior drywall framing with ProSTUD Drywall Framing System AISI North American Specification for the Design of Cold-Formed Steel Structural Members, 2001 with 2004 supplement ASTM C955 ASTM C1007 Installation Load-bearing steel framing ASTM A1003 Material specification for steel sheet requirements Protective coating standards ASTM A924 ASTM A653 ASTM A463 ASTM A591 ASTM A792 ASTM A875 Metallic coated hot-dip process Zinc coated hot-dip process Aluminum-coated hot-dip process Zinc-coated, light coating mass applications 55% aluminum-zinc alloy-coated hot-dip process Zinc-5% aluminum alloy-coated hot-dip process Additional code approvals SSMA (Steel Stud Manufacturers Association) ICC-ES ER-4943P ClarkWestern Building Systems is a member of the Steel Stud Manufacturer s Association (SSMA). ClarkWestern Building Systems has prepared this literature with the utmost diligence and care for accuracy and conformance to standards. ClarkWestern Building Systems reserves the right to modify or change any information contained in this literature without notification. AISI North American Specification for the Design of Cold-Formed Steel Structural Members, 2001 with 2004 supplement ASTM C653 Coating specification ASTM A1003 Material specification ASTM C645 ASTM E119 ASTM E72 ASTM E90 Non-structural steel framing members Fire tests Strength tests Airborne sound transmission UL Underwriters Laboratories Testing Standard UL 263 Fire Tests of Building Construction/Materials Over 40 UL designs for ProSTUD See UL file number R26034 for additional information. Fire designs include U419, V450 & V438. Additional code approvals IBC International Building Code IAPMO ES Pending ICC-ES Pending **UL and UL Design are service marks of Underwriters Laboratories, Inc. ClarkWestern intends this information to be accurate, informative and helpful as a selection guide for choosing ClarkWestern Building System products. However, this information is only to be used for guidance and is not intended to replace the design, drawings, specifications and decisions of a professional architect or engineer. Independent product testing and certification Sound ratings: Western Elecro - Acoustic Laboratory Fire testing: Underwriters Laboratories Inc. Structural testing: (STAR) Structural Testing and Research Inc. Structural analysis: CTLGroup Metal lath & accessories ASTM C847 ASTM C841 Metal lath Installation of interior lathing & furring ASTM C1063 Installation of lathing & furring ASTM A653 Zinc coated hot-dip process ASTM C1047 Accessories standards control joints ASTM A924 Metallic-coated hot-dip process UUB790A APB type 1, grade D, style 2 CE ML/SFA-920 Furring (metal) lathing and plastering Guide specs for metal lathing & furring ClarkWestern Building Systems or its affiliates shall not be responsible for incidental or consequential damages, directly or indirectly sustained, nor for loss caused by application of our products for other than their intended uses. Our liability is limited to replacement of defective products. Claims shall be deemed waived unless they are made to us in writing within thirty (30) days of the date a problem was or reasonably should have been discovered. Green benefits and recycled content: LEED Credit MR 2 Construction Waste Management ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 Recycled Content ClarkWestern s steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 regional materials, please contact Tech Support at or visit USGBC and related logo is a trademark owned by the U.S. Green Building Council and is used by permission. ClarkWestern Building Systems, Inc. plant locations: CALIFORNIA - Riverside Phone: CALIFORNIA - Woodland Phone: CONNECTICUT - Bristol Phone: FLORIDA - Dade City Phone: GEORGIA - Pendergrass Phone: ILLINOIS - Rochelle Phone: MARYLAND - Baltimore Phone: OHIO - Middletown Phone: TEXAS - Dallas Phone: ClarkWestern Design Services. A full spectrum of solutions. CW DESIGN: EAST - Roswell, GA Toll-Free Phone: Local Phone: Toll-Free Fax: Local Fax: CW DESIGN: NORTHEAST - Portland, ME Toll-Free Phone: Toll-Free Fax: CW DESIGN: WEST - Riverside, CA Toll-Free Phone: Toll-Free Fax: TECHNICAL SUPPORT: Phone: CW-FullLine 03/10 ClarkWestern Building Systems, Inc. The technical content of this literature is effective 03/05/10 and supersedes all previous information Centre Pointe Dr. Ste. 210 West Chester, OH Phone: Fax: clarkwestern.com

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36