CORD Egy.'10. Robo-Academy Competition Book of rules. "Line tracking maze solver robot" Academic Committee
|
|
- Alaina Green
- 5 years ago
- Views:
Transcription
1 CORD Egy.'10 Robo-Academy Competition Book of rules "Line tracking maze solver robot" Academic Committee CORD Egy.'10
2 Contents 1. Robo-Academy 2. Rules i. Outlines of competition Ii. Field : Structure and specifications Iii. Game Procedure iv. Competition tasks v. Disqualifications vi. Evaluation system
3 1. Robo-Academy Robo academy is the half of the legend which is called CORD, it started in 2008, 2nd year of launching CORD.It consisted of 2 workshops; both workshops had the same core "General Robotics Consideration". In the next year, 2009, Robo-Academy grew more and enlarged the number of workshops to 4; in each one a specific knowledge in robotic science is given. "Let the games begin" is Robo-Academy slogan which shows that one can enjoy learning and implementing the Knowledge given in Robo-Academy workshops as if he/she is simply playing "Games". And here's Robo-Academy 2010 with the slogan practical mode" to continue what has been done is 2009 and continue spreading the robotics awareness among the students through technical practical sessions held about different topics concerning robot building phases. From this point, the second phase of Robo- Academy comes out The competition.which is about Line tracking maze solver robot!
4 2. Rules i.outline of the competition Operation :is a game based on building a robot which is capable of solving a Maze and reaching its end without being stuck in any closed path in the maze, the robot will be guided by a line which the robot will track it to know the directions. Robot will find some blocks as a T shape in the right way so its job is to carry out the block, put it in the white spot at the end of the maze.
5 ii.field: Structure and Specifications The field consists of Maze Area ends with an end point.. The robot will be guided with a white line with a width of 4 cm The end point is marked by a big white with a radius of 10 cm. The robot dimensions must not exceed 25 cm X 25 cm in order to be able to go through the maze.
6 iii.game procedure: The Robot begins to move automatically from the start point to end point of the maze by only one method which is line tracking. The robot should be able to go to the end of the maze by following the white path drawn on the floor which guides it to the shortest way to the end. The path consists of straight lines Perpendicular to each other and there are no curved lines in the path. The robot should stop automatically when it reaches the end point without any help from any team member. For a mechanical part: For the locomotion system, floor will be slipping, so your locomotion system should be more adaptable with any floor. Robots job is to carry out the block from its path and put to the white spot.
7 System used on carrying the block should depend on motors only if robo-arm or a forklift (no hydraulic or pneumatic systems(. Robot weight should not exceed 5 kg. Now when you find the block you have the choice if you want to let your robot carry it automatic or by a remote control from the participant (wireless remote control), if you choose to make it automatic then the method to identify the block is according to PCP-GND participant. Block: Block will be at T shape. Dimension of T shape will be 10cm x 10 cm x 3 cm.
8 T shape will be at the position like the picture. It is required to carry 1 block only. iv.competition tasks: 1 st task is to get out of the maze area. 2 nd task is to carry the block from its path. 3 rd task is to stop automatically at the white spot. v.disqualifications: A team shall be disqualified if it commits any of the following before/during the match: Robot dimensions exceed 25 cm X 25 cm X 25 cm (Not including its arm). Robot weight exceeds 5 Kg. Supply voltage exceeds 12 Volts. The team performs any act that is not in the spirit of fair play.
9 vi.evaluation system: Process phase points (40 % of Total Points) 1.according to Mega Hertz workshop: )Points are ordered by their importance( o Code must cover all the cases o Simulation of code on the simulator must be neat and organized o Code must be readable o Code must be easy to modify 2.according to Pcb Gnd workshop o printed circuit board or bread board (if you use bread board in the final implementation you will lose points) you can use bread board at earlier stages to test your components and modules individually. o schematic and layout o finishing :did you use cables or soldered wires, the clearance, soldering,...etc 3.according to Robo Crib workshop o General design considerations (Simplicity, maintenance, and safety). o Body shell and fine finishing.
10 o Using motors on lifting system. o Locomotion system is adapted to any floor or not. o Type of material used versus weight. o Deliver the block or not. o Making a gear box or not. Competition phase points (50 % of Total Points) Penalties 1.Touching the robot with your hand 2.Robot gets away from the path (You should restart from last position in which the robot was tracking the line) 3.Going through a wrong path two times (as the robot should recognize the wrong path once it moved through it and it must avoid going through it again) Delivery different phases (design, implementation, testing ) each on its dead line (10 % of total points) (10 % bonus of total points) for any creative add or innovation.
GRID FOLLOWER v2.0. Robotics, Autonomous, Line Following, Grid Following, Maze Solving, pre-gravitas Workshop Ready
Page1 GRID FOLLOWER v2.0 Keywords Robotics, Autonomous, Line Following, Grid Following, Maze Solving, pre-gravitas Workshop Ready Introduction After an overwhelming response in the event Grid Follower
More information«RELAY RACE» CONTEST RULES
«RELAY RACE» CONTEST RULES Version 3.0 dated 20 July, 2017 Contents 1. General provisions... 2 1.1. Task Description... 2 2. Field, Line and Relay Baton Specifications... 2 3. Robot Specifications... 3
More informationIntroduction. robovitics club, VIT University, Vellore Robo-Sumo Event Details v1.2 Revised on Jan-30, 2012
ROBO~SUMO Introduction Robot Sumo competitions since their origin in Japan have from time to time proved to be test benches for robotic platforms all over the world owing to the real time constraints and
More informationNXT Amazing Rules USU Physics Day Lagoon Farmington, UT
NXT Amazing Rules USU Physics Day Lagoon Farmington, UT May 17, 2013 COMPETITION OBJECTIVE The aim of the competition is to foster math, science, engineering and team work in students in 5 th grade. DESIGN
More informationWORLD ROBOT OLYMPIAD Advanced Robotics Challenge Game Description, Rules and Scoring SMART GREENHOUSE
WORLD ROBOT OLYMPIAD 2019 Advanced Robotics Challenge Game Description, Rules and Scoring SMART GREENHOUSE Introduction Robotics is a wonderful platform for learning 21st century skills, solving robotic
More informationNinth Annual SLIIT. Robotic Competition. Open UAV Race Competition Technical Specification. Organized By
Ninth Annual SLIIT Robotic Competition Open UAV Race Competition Technical Specification Organized By Department of Electrical and Computer Engineering Faculty of Engineering Sri Lanka Institute of Information
More informationLINE FOLLOWING RULES. Priit Norak
LINE FOLLOWING RULES Priit Norak +372 5192 7800 priit.norak@robotex.ee Contents 1 Introduction... 3 2 Robot classes... 3 3 The Field... 3 4 The Robot... 3 4.1 Additional requirements for LEGO robots...
More informationLine Follower Enhanced Regulations
Line Follower Enhanced Regulations 1. Generalities The Line Follower Enhanced competition s goal is finishing, in the shortest possible time, a track specially designed for this competition. A team does
More informationMaintenance Manual INTERNAL BATTERY STANDBY CHARGER OPTION BC01 (9669), 9670 AND 9771 (FOR MASTR II STATIONS) Mobile Communications LBI-30869L
L Mobile Communications INTERNAL BATTERY STANDBY CHARGER OPTION BC01 (9669), 9670 AND 9771 (FOR MASTR II STATIONS) Printed in U.S.A. Maintenance Manual TABLE OF CONTENTS Page DESCRIPTION...................................................
More informationMini-Sumo Tournament Rules
Mini-Sumo Tournament Rules These rules are base upon those of Fuji Soft ABC, Inc. for All Japan Robot-Sumo Tournament. While aimed at more local/national tournaments they are intended to be compatible
More informationRULES OF SAFFRON FOLLWER COLLECTING ROBOT
RULES OF SAFFRON FOLLWER COLLECTING ROBOT The Sphinx Flower Collection Competition of the International First Robot Contest consists of a platform and a track. 1. Platform It represents the whole area
More informationWorld Robot Olympiad 2018
World Robot Olympiad 2018 ADVANCED ROBOTICS CHALLENGE RULES DO NOT PUBLISH BEFORE JANUARY 15TH 2018 Version: Final Version January 15 th Table of Contents ADVANCED ROBOTICS CHALLENGE RULES... 1 Introduction...
More informationMindstorms NXT. mindstorms.lego.com
Mindstorms NXT mindstorms.lego.com A3B99RO Robots: course organization At the beginning of the semester the students are divided into small teams (2 to 3 students). Each team uses the basic set of the
More informationLEGO BASED CHALLENGE. 1. Material
LEGO BASED CHALLENGE 1. Material 1. The controller, motors and sensors used to assemble robots must be from LEGO MINDSTORMS sets (NXT or EV3). 2. Only LEGO branded elements may be used to construct the
More informationEQ-ROBO Programming : bomb Remover Robot
EQ-ROBO Programming : bomb Remover Robot Program begin Input port setting Output port setting LOOP starting point (Repeat the command) Condition 1 Key of remote controller : LEFT UP Robot go forwards after
More informationCompetition Arena Rules Revised March 21, 2017
Competition Arena Rules Revised March 21, 2017 General Rules GR1 Only one robot per team will be allowed in the tournament. Backup robots will NOT be allowed. Teams found in violation will not be allowed
More informationRobotic Systems Challenge 2013
Robotic Systems Challenge 2013 An engineering challenge for students in grades 6 12 April 27, 2013 Charles Commons Conference Center JHU Homewood Campus Sponsored by: Johns Hopkins University Laboratory
More informationChange Log. IEEE Region 5 Conference Student Competitions Robotics Competition 2018 Competition Description and Rules. 7/13/2017 Rev 1.
IEEE Region 5 Conference Student Competitions Robotics Competition 2018 Competition Description and Rules Change Log Date Comment 7/13/2017 Rev 1.0 Draft WS 8/3/2017 Rev 1.1 Draft LL 8/22/2017 Initial
More informationFire Fighting. Objective. Robot. Fire Fighting. Name of Event: Robots per Team: 1
Fire Fighting Name of Event: Robots per Team: 1 No. of Players: Robot Control: Event Summary: Fire Fighting 2 players/team Autonomous This is an autonomous robot competition between 2 teams to extinguish
More informationForms & Score Sheets
RoboCup@Home Forms & s Version: 2011 Revision: 164M Last Build Date: June 29, 2011 Time: 497 Last Changed Date: 2011-05-26 18:19:35 +0200 (Thu, 26 May 2011) Registration Form Team leader name: Weight &
More informationUtah Elementary Robotics Obstacle Course Rules USU Physics Day. Competition at USU Brigham City Campus 989 S Main St Brigham City, UT 84302
Utah Elementary Robotics Obstacle Course Rules USU Physics Day Competition at USU Brigham City Campus 989 S Main St Brigham City, UT 84302 Starting at 10:00 AM May 2 nd, 2017 COMPETITION OBJECTIVE The
More informationPCB & Circuit Designing (Summer Training Program 2014)
(Summer Training Program 2014) PRESENTED BY In association with RoboSpecies Technologies Pvt. Ltd. Office: A-90, Lower Ground Floor, Sec- 4, Noida, UP Contact us: Email: stp@robospecies.com Website: www.robospecies.com
More informationWinter 2007/2008 Third Annual IEEE Lego Robot Competition Rules
Welcome to the Third Annual IEEE Lego Robot Competition. In this document you will find the rules and regulations for the events for the Winter 2007/2008 competition. This competition will take place in
More informationCLASS 200 EQUIPMENT EXCITATION SUPPORT SYSTEM
CLASS 200 EQUIPMENT EXCITATION SUPPORT SYSTEM APPLICATION: Many brushless exciter-equipped generators are required to sustain the substantial current overloads associated with starting large motors. Typically,
More information*Contest and Rules Adapted and/or cited from the 2007 Trinity College Home Firefighting Robot Contest
Firefighting Mobile Robot Contest (R&D Project)* ITEC 467, Mobile Robotics Dr. John Wright Department of Applied Engineering, Safety & Technology Millersville University *Contest and Rules Adapted and/or
More informationBC Skills Canada 2017
BC Skills Canada 2017 Tethered Mini-Sumo Robot Challenge Scope April 5 th, 2017 Tradex Abbotsford BC Technical Chair/Committee: Steve Claassen (steve.claassen@sd71.bc.ca) UPDATED IN SCOPE FOR 2017: Students
More informationWCRG 2011 Sumo Robots Rev 0. Sumo Rules. (Mini & Full Size Sumo & LEGO)
Object WCRG 2011 Sumo Robots Rev 0 Sumo Rules (Mini & Full Size Sumo & LEGO) The object is for your robot to push the other robot out of the sumo ring. Robot Specifications Robots must not intentionally
More informationMATERIALS PROVIDED BY SCIENCE & TECH FAIR STAFF AT EVENT:
PURPOSE: The purpose of the Robotics competition is: 1) Design and create a robot, within the constraints listed below, which competes and wins the Robot competition described in the rules below. 2) The
More informationCariboo Junior Skills Competition
Cariboo Junior Skills Competition Scope Document Sumo Robots 2018 Thompson Rivers University March 2 nd, 2018 Eligibility: This competition is open to teams of students in grades six through10. Each team
More informationSample Pages. Classroom Activities for the Busy Teacher: NXT. 2 nd Edition. Classroom Activities for the Busy Teacher: NXT -
Classroom Activities for the Busy Teacher: NXT 2 nd Edition Table of Contents Chapter 1: Introduction... 1 Chapter 2: What is a robot?... 5 Chapter 3: Flowcharting... 11 Chapter 4: DomaBot Basics... 15
More informationC - Underground Exploration
C - Underground Exploration You've discovered an underground system of tunnels under the planet surface, but they are too dangerous to explore! Let's get our robot to explore instead. 2017 courses.techcamp.org.uk/
More informationRoboMind Challenges. Line Following. Description. Make robots navigate by itself. Make sure you have the latest software
RoboMind Challenges Line Following Make robots navigate by itself Difficulty: (Medium), Expected duration: Couple of days Description In this activity you will use RoboMind, a robot simulation environment,
More informationManufacturing Operations
End of Course (EOC) Bank Blueprints Manufacturing Operations Table of Contents Table of Contents... 1 About Test Blueprints... 2 Gas Metal Arc Welding... 3 Shielded Metal Arc Welding... 4 Flux Cored Arc
More informationSTEP 0 Prepare the Materials.
How to Build a Germanium Fuzz Guitar Effect. This document will guide you to build and test your Germanium Fuzz guitar pedal. With all the materials on hand, it takes around 2-4 hours to build it. Try
More informationPCB & Circuit Designing
(Summer Training Program) 4 Weeks/30 Days PRESENTED BY RoboSpecies Technologies Pvt. Ltd. Office: W-53G, Sector-11, Noida-201301, U.P. Contact us: Email: stp@robospecies.com Website: www.robospecies.com
More informationi.bot (Line Follower)
i.bot (Line Follower) TRACK 1. The track will be 2 wide, black in colour on white coloured polyvinyl chloride surface. 2. Turns on track will only be at right angles. There will be no obtuse and acute
More information580A Automatic Cable Tying Machine 580A
Automatic Cable Tying Machine 580A Contenido Regular Information...3 Technical parameters:...5 Operation Instruction....6 Trouble Shooting....8 Maintenance....9 After-sales Service...9 Safety Instructions....10
More informationCoSpace Make Code Challenge Rules 2016
CoSpace Make Code Challenge Rules 2016 CoSpace Technical Committee This is the official rules for Make Code Challenge 2016 and is released by the CoSpace Technical Committee. The rules contained in this
More informationMobile Robot Navigation Contest for Undergraduate Design and K-12 Outreach
Session 1520 Mobile Robot Navigation Contest for Undergraduate Design and K-12 Outreach Robert Avanzato Penn State Abington Abstract Penn State Abington has developed an autonomous mobile robotics competition
More informationBuilding an autonomous light finder robot
LinuxFocus article number 297 http://linuxfocus.org Building an autonomous light finder robot by Katja and Guido Socher About the authors: Katja is the
More information2012 Alabama Robotics Competition Challenge Descriptions
2012 Alabama Robotics Competition Challenge Descriptions General Introduction The following pages provide a description of each event and an overview of how points are scored for each event. The overall
More informationMatch Regulation for All Japan Robot-Sumo Tournament Ver4.0
Match Regulation for All Japan Robot-Sumo Tournament Ver4.0 Chapter I General Provisions (Objective) Article 1. This Regulation defines match rules and regulations for the All Japan Robot-Sumo Tournament.
More informationFIRST LEGO LEAGUE. PowerUp Summer Game. Presented by FRC 6328
FIRST LEGO LEAGUE PowerUp Summer Game 2018 Presented by FRC 6328 FLL POWER UP OVERVIEW The purpose of the FLL PowerUP game is to provide an engaging summer program for FLL students that will help prepare
More informationImplement a Robot for the Trinity College Fire Fighting Robot Competition.
Alan Kilian Fall 2011 Implement a Robot for the Trinity College Fire Fighting Robot Competition. Page 1 Introduction: The successful completion of an individualized degree in Mechatronics requires an understanding
More informationPCB & Circuit Designing (Summer Training Program) 6 Weeks/ 45 Days PRESENTED BY
PCB & Circuit Designing (Summer Training Program) 6 Weeks/ 45 Days PRESENTED BY RoboSpecies Technologies Pvt. Ltd. Office: D-66, First Floor, Sector- 07, Noida, UP Contact us: Email: stp@robospecies.com
More informationRobofest SM 2005 Competition Challenge: RoboRelay Jan. 6, 2005 v5.2 (Official Version) Junior Competition Division ...
Robofest SM 2005 Competition Challenge: RoboRelay Jan. 6, 2005 v5.2 (Official Version) Junior Competition Division Crate 3.5 (std. stud) 18-24 12 12? Robot1? Robot2... 18-24 2 gap 4 gap (VHS tape) Crate
More informationManual Sumo Robot Competition (Junior)
Manual Sumo Robot Competition (Junior) (Rules and Regulations) 13-14 Mei 2017 Page 1 1.0 INTRODUCTION Robot-sumo, or pepe-sumo, is a sport in which two robots attempt to push each other out of a circle
More informationI. INTRODUCTION MAIN BLOCKS OF ROBOT
Stair-Climbing Robot for Rescue Applications Prof. Pragati.D.Pawar 1, Prof. Ragini.D.Patmase 2, Mr. Swapnil.A.Kondekar 3, Mr. Nikhil.D.Andhare 4 1,2 Department of EXTC, 3,4 Final year EXTC, J.D.I.E.T Yavatmal,Maharashtra,
More informationErik Von Burg Mesa Public Schools Gifted and Talented Program Johnson Elementary School
Erik Von Burg Mesa Public Schools Gifted and Talented Program Johnson Elementary School elvonbur@mpsaz.org Water Sabers (2008)* High Heelers (2009)* Helmeteers (2009)* Cyber Sleuths (2009)* LEGO All Stars
More informationFamiliarization with the Servo Robot System
Exercise 1 Familiarization with the Servo Robot System EXERCISE OBJECTIVE In this exercise, you will be introduced to the Lab-Volt Servo Robot System. In the Procedure section, you will install and connect
More informationAll Girls Tournament 2017
All Girls Tournament 2017 Agenda Student team roles Pits and preparing your robot for competition Troubleshooting your robot Behind the Glass Field Volunteers Q and A Preparing robot for each match in
More informationCLASSIFICATION CONTROL WIDTH LENGTH
Sumobot Competition Robots per Event: Length of Event: Robot Weight Range: Robot Dimensions: Arena Specifications: Robot Control: Event Summary: Two each match 1 minute per match (max) Two robots compete
More informationABC V1.0 ASSEMBLY IMPORTANT!
ABC V1.0 ASSEMBLY Before starting this kit, prepare the following tools: Soldering iron (15-20W will do), flush cutters, no.2 hex screwdriver or allen key and phillips screwdriver. Also briefly go through
More informationELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0
ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4
More informationS B Patil Public School, Pune
LS Creative Learnings Pvt Ltd., STEM-Robotics Education Report for Jan 2018 S B Patil Public School, Pune 1 Grade: III Jan 2017 Simple machine Inclined plane Lesson To understand about types of simple
More informationCHAPTER 4 ANALYSIS AND DESIGN
9 CHAPTER 4 ANALYSIS AND DESIGN 4.1 Analysis In this project, the sorting activity of the item or packet delivery is done automatically with the computer (integrated with Arduino microcontroller). The
More informationPneumatic Catapult Games Using What You Know to Make the Throw. Pressure x Volume = Energy. = g
Pneumatic Catapult Games Using What You Know to Make the Throw Pressure x Volume = Energy θ Mega Pascal s KE PE Range = Release Velocity g 2 1 Pneumatic Catapult Games Using What You Know to Make the Throw
More informationBuilt-in soft-start feature. Up-Slope and Down-Slope. Power-Up safe start feature. Motor will only start if pulse of 1.5ms is detected.
Thank You for purchasing our TRI-Mode programmable DC Motor Controller. Our DC Motor Controller is the most flexible controller you will find. It is user-programmable and covers most applications. This
More informationEngineering and Design
End of Course (EOC) Bank Blueprints Engineering and Design Table of Contents Table of Contents... 1 About Test Blueprints... 2 Engineering Design... 3 Engineering Principles... 4 Manufacturing Operations...
More information8 th Annual Robotics Competition. High School and Middle School Teams. April 5th, Event Rules Booklet. Sponsored by
8 th Annual Robotics Competition For High School and Middle School Teams April 5th, 2017 Event Rules Booklet Sponsored by 1 Table of Contents Table of Contents 2. Competition Overview 2.1. Major Changes
More informationWhen considering the permanent location for your SmithyCNC bed mill the following should be taken into consideration:
CNC-1240 INSTALLATION & SET-UP SET-UP CLEARANCES & CONDITIONS When considering the permanent location for your SmithyCNC bed mill the following should be taken into consideration: The machine should be
More informationIndustrial Maintenance Mechanics
Measuring What Matters in Job Ready Assessment Blueprint Industrial Maintenance Mechanics Test Code: 2074 / Version: 01 Copyright 2007 General Assessment Information Industrial Maintenance Mechanics Blueprint
More informationSBGF Backgammon Tournament Rules
SBGF Backgammon Tournament Rules The tournament rules apply in all tournaments approved by The Swedish Backgammon Federation (SBGF), unless otherwise stated in the tournament invitation. All exceptions
More informationExperiment P24: Motor Efficiency (Photogate, Power Amplifier, Voltage Sensor)
PASCO scientific Physics Lab Manual: P24-1 Experiment P24: Motor Efficiency (Photogate, Power Amplifier, Voltage Sensor) Concept Time SW Interface Macintosh File Windows File energy 30 m 700 P24 Motor
More informationInternational Robotic Olympiad Land-based Robot Competition Rules (V5) (Secondary School Division) General Rules 3
International Robotic Olympiad 2016 1 Land-based Robot Competition Rules (V5) (Secondary School Division) General Rules 3 Game Rules 3 Robot Rules 3 Other Points to Note 4 Hand Generator (attachment 1)
More informationLine FollowerRobot. Event Coordinator: Paras Sharma (EEE 4nd Year) Pankaj Rawat (ME 3 RD YEAR B) Event Detail: Line follower robot race competition.
Line FollowerRobot Event Coordinator: Paras Sharma (EEE 4nd Year) Pankaj Rawat (ME 3 RD YEAR B) Event Detail: Line follower robot race competition. Rules & Regulations: Track for qualifying round will
More informationTECHNICAL SPECIFICATIONS NO. EMT 6689(REV. 00) WITH INDENT NO. E/6743/5/5954
TECHNICAL SPECIFICATIONS NO. EMT 6689(REV. 00) WITH INDENT NO. E/6743/5/5954 ROCKER ARM TYPE SPOT WELDING MACHINE WITH MICROPROCESSOR FOR SPOT WELDING OF SPACERS ON VENTILATING STAMPINGS OF TURBOGENERATORS
More informationNebraska 4-H Robotics and GPS/GIS and SPIRIT Robotics Projects
Name: Club or School: Robots Knowledge Survey (Pre) Multiple Choice: For each of the following questions, circle the letter of the answer that best answers the question. 1. A robot must be in order to
More informationTIP READ THE MANUAL. Following taken from FIRST Tech Challenge Game Manual Part 1 Rev 1.2. ispacescience.org
TIP READ THE MANUAL Following taken from 2015-2016 FIRST Tech Challenge Game Manual Part 1 Rev 1.2 Robot Rules Simplified: RG01 Robot must pass inspection Conduct self-inspection using checklist Have copy
More informationWhere C= circumference, π = 3.14, and D = diameter EV3 Distance. Developed by Joanna M. Skluzacek Wisconsin 4-H 2016 Page 1
Instructor Guide Title: Distance the robot will travel based on wheel size Introduction Calculating the distance the robot will travel for each of the duration variables (rotations, degrees, seconds) can
More informationacknowledgments...xv introduction...xvii 1 LEGO MINDSTORMS NXT 2.0: people, pieces, and potential getting started with the NXT 2.0 set...
acknowledgments...xv introduction...xvii about this book...xvii part I: introduction to LEGO MINDSTORMS NXT 2.0...xviii part II: building...xviii part III: programming...xviii part IV: projects...xix companion
More informationTheme & Rules. ABU Asia-Pacific Robot Contest 2009 Tokyo. Host Organising Committee. September 1st 2008
ABU Asia-Pacific Robot Contest 2009 Tokyo Theme & Rules Travel Together for the Victory Drums September 1st 2008 ABU Asia-Pacific Robot Contest 2009 Tokyo Host Organising Committee 1 Contents Towards the
More informationSpecification of Requirements. Request for tenders for antenna systems for Aalborg University. Side 1
Specification of Requirements Request for tenders for antenna systems for Aalborg University Side 1 1. Introduction The Department of Electronic Systems represents one of the areas of research of Aalborg
More information1. Arena 1.1. Description
1. Arena 1.1. Description 1.1.1. The arena is modular by tiles, which can be used to make an endless number of different courses for the robots to traverse and also provides with the ability to add new
More informationCQ-3 Series Current Sensor Application Note
Sensing Products Division August, 28, 2017 CQ-3 Series Current Sensor Application Note 0. Overview This document provides application note of Asahi-kasei s current sensor CQ-3 series (including CQ-330x
More informationMedb ot. Medbot. Learn about robot behaviors as you transport medicine in a hospital with Medbot!
Medb ot Medbot Learn about robot behaviors as you transport medicine in a hospital with Medbot! Seek Discover new hands-on builds and programming opportunities to further your understanding of a subject
More information1 Day Robot Building (MC40A + Aluminum Base) for Edubot 2.0
1 Day Robot Building (MC40A + Aluminum Base) for Edubot 2.0 Have you ever thought of making a mobile robot in 1 day? Now you have the chance with MC40A Mini Mobile Robot Controller + some accessories.
More informationFundamentals of Model Airplane Building
The dihedral and sweepback give stability The finished glider ready to launch Fundamentals of Model Airplane Building A Complete Course for Beginners Who Wish to Become Expert. How to Build a Contest Glider-Part
More informationUNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS
UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS Definition: The sections obtained by the intersection of a right circular cone by a cutting plane in different positions are called conic sections
More informationTable of Contents FIRST 2005 FIRST Robotics Competition Manual: Section 4 The Game rev C Page 1 of 17
Table of Contents 4 THE GAME...2 4.1 GAME OVERVIEW...2 4.2 THE GAME...2 4.2.1 Definitions...2 4.2.2 Match Format...5 4.3 Rules...5 4.3.1 Scoring...5 4.3.2 Safety...6 4.3.3 General Match Rules (GM)...7
More informationTEST PROJECT MOBILE ROBOTICS FOR JUNIOR
TEST PROJECT MOBILE ROBOTICS FOR JUNIOR CONTENTS This Test Project proposal consists of the following documentation/files: 1. DESCRIPTION OF PROJECT AND TASKS DOCUMENTATION The JUNIOR challenge of Mobile
More informationPT 335SCC Multi Operator Manual
PT 335SCC Multi Operator Manual 755 Griffith Court, Burlington, Ontario, Canada L7L 5R9 Tel:+(905) 633-7663 Fax:+(905) 637-4419 www.graphicwhizard.com 1 TABLE OF CONTENTS Important Information General
More informationAnalysis of Wireless Power Transmission Using Resonant Inductive Coupling for small distance
Analysis of Wireless Power Transmission Using Resonant Inductive Coupling for small distance Manjula G Hegde 1, Shruthi Baglodi J. 2 Ganapathi S Hegde 3 Assistant Professor 1, ECE Department, Shri Pillappa
More informationSumo-bot Competition Rules
Sumo-bot Competition Rules Location: Guadalupe County Agricultural Extension Office, 210 Live Oak, Seguin, TX 78155 Date and Time: December 2, 2017 from 9-2 PM doors open at 9AM Check in and Inspections:
More informationInternational Robotic Olympiad 2018
International Robotic Olympiad 2018 1 Land-based Robot Competition Rules (V1) (Secondary School Division) General Rules 3 Game Rules 3 Robot Rules 3 Other Points to Note 4 Hand Generator (attachment 1)
More information2016 STEM Survival Competition. November 5, 2016 Hosted by: Wilkinson County Christian Academy
2016 STEM Survival Competition November 5, 2016 Hosted by: Wilkinson County Christian Academy Table of Content Welcome...3 Schedule......4 Rules.5 Events.. 7 Tip and Guidelines..9 Thank You.. 10-11 PO
More informationWorld Robot Olympiad 2018
World Robot Olympiad 2018 Advanced Robotics Category Game Description, Rules and Scoring Version: Final Version January 15 th Table of Contents Introduction... 3 Important changes for Tetrastack 2018...
More informationHeritage MedCall. Sentry E-Call Model HM-527 Resident Host Panel
Heritage MedCall Sentry E-Call Model HM-527 Resident Host Panel 430-527B 0305 Heritage MedCall, Inc. Issue 1, March 2005 Heritage Medcall Sentry Emergency Call System Model 527 Host Panel Installation
More informationInternational Robotic Olympiad Ocean Exploration Competition Rules (V5) (Primary School Division)
International Robotic Olympiad 2016 Ocean Exploration Competition Rules (V5) 1 (Primary School Division) General Rules 2 Game Rules 2 Robot Rules 2 Other Points to Note 3 Hand Generator Attachment 1 4
More informationA - Debris on the Track
A - Debris on the Track Rocks have fallen onto the line for the robot to follow, blocking its path. We need to make the program clever enough to not get stuck! Step 1 2017 courses.techcamp.org.uk/ Page
More informationParts Included: T-Feet Assembly
Parts Included: T-Feet Assembly Foot Kit: J-Rail Kit: Column Kit: 2 Feet 2 T-Top Supports 2 J-Rails Hex Rod to be Included on a Crank Assembly only. 2 Electric or Crank Columns 3 rd Leg option for 3 leg
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 8-10: LEVELING GENERAL. Leveling 8-10: LEVELING. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Leveling CHAPTER 8-10: LEVELING GENERAL 8-10: LEVELING 1. General This chapter provides information necessary to properly level the airplane for any of the various maintenance,
More informationIntroduction to the Op-Amp
Purpose: ENGR 210/EEAP 240 Lab 5 Introduction to the Op-Amp To become familiar with the operational amplifier (OP AMP), and gain experience using this device in electric circuits. Equipment Required: HP
More information03/7/12 Issuance UTD Section Page 1 of 5 Electrical General
SECTION 26 01 00 ELECTRICAL GENERAL PART 1: GENERAL 1.1 Electrical/Telecommunications Design 1.1.1 This section of the design and construction standard outlines general requirements for electrical and
More informationOperator's manual. TruTool N 200 (1A1) english
Operator's manual TruTool N 200 (1A1) english Table of contents 1. Safety...3 2. Description...5 2.1 Correct use...6 2.2 Technical data...7 3. Tool assembly...8 3.1 Changing the stroke rate...8 4. Operation...10
More informationCozmo Clench(wildcard)
Cozmo Clench(wildcard) TASK: The team has to build a manually controlled bot which can do the simple task of gripping blocks and putting them in target zones so that it can complete the route by overcoming
More informationDELINEATOR REFERENCE POINT 200' TYPICAL SPACING (YELLOW DELINEATORS) END OF MERGE LANE TAPER DELINEATOR REFERENCE POINT
200' TYP. 600' < EACH SIDE BOTH ROADWAYS END OF MERGE LANE TAPER TYPICAL FOR ALL 2-LANE MERGES EXCEPT WHERE THERE IS A MERGE FROM THE RIGHT AND NO OFFSET IN THE THROUGH LANES END OF MERGE LANE TAPER 200'
More informationGael Force FRC Team 126
Gael Force FRC Team 126 2018 FIRST Robotics Competition 2018 Robot Information and Specs Judges Information Packet Gael Force is proof that one team from a small town can have an incredible impact on many
More informationELECTRICAL GENERAL DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL Electrical/Telecommunications Design
PART 1: GENERAL 1.01 Electrical/Telecommunications Design A. This section of the design and construction standard outlines general requirements for electrical and telecommunications designs to be performed
More informationDUPLAYER. 1. COMPANY Profile. Introduction
1. COMPANY Profile Introduction Duplayer is specialized in manufacturing and selling educational robot parts under the philosophy of dedication to future robot industry development. The educational robot
More information