Camur II Anode Ladder Quick
|
|
- Victoria Watson
- 5 years ago
- Views:
Transcription
1 Camur II Anode Ladder Quick 1 For automatic monitoring of Anode Ladder and Drill Core Anode 1 sensors Description The Camur II Anode Ladder node monitors automatically LPR, ZRA, resistance, potential and temperature. The inputs are galvanically separated from the bus side. Technical data Inputs Voltage 7 Current 7 AC resistance 7 Temperature 1 (Pt1000) Temp. coefficient 0,009 % / C Noise ± 1 division Impedance > 50 MΩ Sampling interval 1 s Polarization output (LPR) Range ± 2.4 V Resolution 0.1 mv Accuracy % Resistance measurement signals Vosc Rout Range 1 1 V 220 Ω (below 500 Ω: 0.5 V / 220 Ω ) Range 2 1 V 220 Ω Range 3 1 V 220 Ω Range 4 1 V 220 Ω Frequency of 1kHz Power in Power consumption Dimensions (WxHxD) Weight VDC V 64 x 82 x 34 mm 125 g 1 Sensortec GmbH Page 1 of 5
2 Voltage Current AC resistance Temperature Range 1 ± 2.4 VDC ± 5 madc Ω C Resolution 0.1 mv 1 μa 1 Ω 0.01 C Accuracy 0.2 mv 1 μa 1 % ± 0.1 C Range 2 ± 400 μa 2-20 k Ω - Resolution μa 1 Ω - Accuracy μa 1 % - Range 3 - ± 40 μa k Ω - Resolution μa 10 Ω u - Accuracy μa 1 % - Range M Ω - Resolution Ω - Accuracy % - (5% below 1 MΩ) Connectors Bus Double set of screw terminals in the node box. (+, -, H, L) Input / output A1 - A6 Anodes (working electrodes) 1-6 RC Rebar connection C Cathode (counter electrode) RE Reference electrode P1+ Supply voltage for Pt1000 P2- Supply voltage for Pt1000 P1 Input for Pt1000 P2 Input for Pt1000 Note! For two-wire Pt1000 sensors, connect P1+ with P1 and P2- with P2. The analog inputs are not galvanically separated from each other. Recording types Page 2 of 5
3 The Anode Ladder node supports recording types Monitor, Monitor Extended and LPR in Camur II software. Outputs from measurements in standard format reports a list of the measurements of each sensor in the format: [sensor name]-[value type], one column for each combination. Measurements that belong to the same sample interval are collected in one row. Measurement reports Monitor Value / type Unit Measurement I 1 ma Current between A1 and C I 2 ma Current between A2 and C I 3 ma Current between A3 and C I 4 ma Current between A4 and C I 5 ma Current between A5 and C I 6 ma Current between A6 and C I 7 ma Current between RC and C R 1 k Ω Resistance between A1 and A2 R 2 k Ω Resistance between A2 and A3 R 3 k Ω Resistance between A3 and A4 R 4 k Ω Resistance between A4 and A5 R 5 k Ω Resistance between A5 and A6 R 6 k Ω Resistance between A6 and RC R 7 k Ω Resistance between RC and C T C Temperature U 1 mv Potential between A1 and RE U 2 mv Potential between A2 and RE U 3 mv Potential between A3 and RE U 4 mv Potential between A4 and RE U 5 mv Potential between A5 and RE Page 3 of 5
4 U 6 mv Potential between A6 and RE U 7 mv Potential between RC and RE Monitor Extended The same as in Monitor plus LPR result calculation Value/ type Unit Measurement C1 I ma Calculated corrosion current at A1 C2 I ma Calculated corrosion current at A2 C3 I ma Calculated corrosion current at A3 C4 I ma Calculated corrosion current at A4 C5 I ma Calculated corrosion current at A5 C6 I ma Calculated corrosion current at A6 C7 I ma Calculated corrosion current at RC LPR measurements C1-V mv Potential between A1 and RE C1-I ma Current between A1 and C C2-V mv Potential between A2 and RE C2-I ma Current between A2 and C C3-V mv Potential between A3 and RE C3-I ma Current between A3 and C C4-V mv Potential between A4 and RE C4-I ma Current between A4 and C C5-V mv Potential between A5 and RE C5-I ma Current between A5 and C C6-V mv Potential between A6 and RE C6-I ma Current between A6 and C Page 4 of 5
5 C7-V mv Potential between RC and RE C7-I ma Current between RC and C LPR results Value/ type Unit Measurement C1I ma Calculated corrosion current at A1 C1S ma Standard deviation for corrosion current at A1 C2I ma Calculated corrosion current at A2 C2S ma Standard deviation for corrosion current at A2 C3I ma Calculated corrosion current at A3 C3S ma Standard deviation for corrosion current at A3 C4I ma Calculated corrosion current at A4 C4S ma Standard deviation for corrosion current at A4 C5I ma Calculated corrosion current at A5 C5S ma Standard deviation for corrosion current at A5 C6I ma Calculated corrosion current at A6 C6S ma Standard deviation for corrosion current at A6 C7I ma Calculated corrosion current at RC C7S ma Standard deviation for corrosion current at RC Page 5 of 5
AI Analogue Input Module (open < 2.8 ma)
General Specifications GS48C17Z02-00E-N -02 Analogue Input Module (open < 2.8 ma) GENERAL Figure 1 This Analogue Input module, or trip amplifier, contains two circuits and can be utilized for various applications.
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationUSB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
More informationQ.raxx A slimline RS / EC Universal Measurement System
Q.raxx A107-16 slimline RS / EC Universal Measurement System The Q.raxx slimline product is based on the standardised 19 technology, one rack unit (1 U) and is designed for measurements with a high level
More informationDEA 115, Digital Input/Output Modules
Catalog 12 Input/Output Modules for S5 115 DEA 115, Digital Input/Output Modules Digital input/output module The digital input modules from the Systeme Helmholz GmbH convert the external binary signals
More informationAdvanced Ladder Logic Full IEC Languages 25A for <1 24 VDC DC Switched
EXL6 OCS Datasheet for HE- EXL1E0, HE- EXL1E2, HE- EXL1E3, HE- EXL1E4, HE- EXL1E5, HE- EXL1E6 HEXT371C100, HEXT371C112, HEXT371C113, HEXT371C114, HEXT371C115, HEXT371C116 1. Specifications Required Power
More informationAMM-1022 Digital Multimeter USER`S MANUAL
Digital Multimeter USER`S MANUAL www.tmatlantic.com CONTENTS 1. SAFETY INFORMATION.3 2. DESCRIPTION..6 3. SPECIFICATIONS.8 4. OPERATING INSTRUCTION..11 4.1 Voltage measurement...11 4.2 Current measurement
More informationComponents Signal Conditioning For Your Computer Instruments Standard Models
EPAD2/CPAD2 Modules Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement CAN and RS-485 Modules EPAD2/CPAD2 Modules The EPAD2 and CPAD2 series are multichannel
More informationMULTIFUNCTION GRAPHICAL UNIT MGU 800
MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible
More information1. SAFETY INFORMATION.1 2. DESCRIPTION SPECIFICATIONS.6 4. OPERATING INSTRUCTION Voltage measurement Current measurement 10
CONTENTS 1. SAFETY INFORMATION.1 2. DESCRIPTION..4 3. SPECIFICATIONS.6 4. OPERATING INSTRUCTION..9 4.1 Voltage measurement...10 4.2 Current measurement 10 4.3 Resistance measurement...12 4.4 Diode test.12
More informationKistler LabAmp. Electronics & Software. Charge Amplifier and Data Acquisition Unit for Dynamic Measurements. Type 5165A...
Electronics & Software Kistler LabAmp Charge Amplifier and Data Acquisition Unit for Dynamic Measurements This universal laboratory charge amplifier can be used wherever dynamic signals 1) of mechanical
More informationEconomical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
More informationQ.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
More informationCAN-IO Custom IO remote module
CAN-IO Custom IO remote module Main characteristics High customization Integrate different types of inputs/ outputs Up to 40 total channels DIN rail mount or plate Main applications Climatic chambers Autoclaves
More informationDC Resistance Meters 2840 Series
Data Sheet DC Meters Touch screen to zoom, select, and enter values The DC resistance meters feature high accuracy and resolution measurements in the milliohm range. Both meters are ideally suited for
More information96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status 06/03/0 panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage
More informationQ.raxx A101-8 slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack mount unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field
More informationDIGITAL PANEL METERS. Overview of product range. Product selection guide. Info & advice. µdigi1 and µdigi2 ranges
ENERGY METERS 099 0 0 0 Overview of product range General overview Product selection guide by functions by applications Info & advice Keeping up with current changes µdigi and µdigi ranges x8 mm or 8x9
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationForce and strain sensors. Measure. Test. Control. Edition 2016
Force and strain sensors. Measure. Test. Control. Edition 2016 Force and strain sensors by Baumer combine tried and tested technology and sophisticated innovations. 1 Contents. Introduction 1 Product key
More informationMeasurement and Instrumentation
POWER QUALITY ENERGY PERFORMANCE Measurement and Instrumentation Overview of ranges Selection guide Info & advice Economical range for industrial use μdigi1 - μdigi2 ranges Programmable range for universal
More information96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status /0/04 panelmeter6x4_gb.doc page subject to alterations; errs including printer s errs 6x4 Digital panel meter Direct
More informationAssembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
More informationhvbase-n Negative High Voltage Generator and Voltage Divider for 10-stage PMT
and Voltage Divider for 10-stage PMT hvbase-n The is a combined negative high voltage generator and voltage divider for 10-stage photomultiplier tubes (PMT). It supports digital or analog high-voltage
More informationHomework Assignment 01
Homework Assignment 01 In this homework set students review some basic circuit analysis techniques, as well as review how to analyze ideal op-amp circuits. Numerical answers must be supplied using engineering
More informationModicon Momentum automation platform 0
Presentation, description Presentation The Momentum analog input bases enable acquisition of various analog values encountered in industrial applications, including: b b b b Standard high level (± 5 V,
More informationExercise 2: Demodulation (Quadrature Detector)
Analog Communications Angle Modulation and Demodulation Exercise 2: Demodulation (Quadrature Detector) EXERCISE OBJECTIVE When you have completed this exercise, you will be able to explain demodulation
More informationSILICon IrrADIAnCe SenSor
Measurement of Solar Silicon irradiance sensors (Si sensor) show a cost-effective, but rugged and reliable solution for the measurement of solar irradiance, especially for the monitoring of Photovoltaic
More informationDS 6000 Specifications
DS 6000 Specifications All the specifications are guaranteed except the parameters marked with Typical and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature.
More informationKistler LabAmp for DynoWare
Electronics & Software Kistler LabAmp for DynoWare Charge Amplifier and Data Acquisition for Multicomponent Force Measurement This instrument is ideal for multicomponent force-torque measurement with piezoelectric
More informationDUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER
OPERATOR S MANUAL DUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER Masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India Web Site: www..com
More informationDP2000 ORDERING GUIDE To Order MODEL NO.
1 8 DIN VERSATILE PROCESS MONITORS CONFIGURABLE DP2000-S, 1 8 DIN meter, shown smaller than actual size. DP2000 Series Complete with Input Board RoHS 2 Compliant DP2000-J1, with TJ36-ICSS-116G-12, transition
More informationSDM3045X Digital Multimeter. DataSheet
SDM3045X Digital Multimeter DataSheet-2016.06 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationDigital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
More informationEPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface
EPAD & CPAD Modules EPAD2/CPAD2/CPAD3 Modules Modules with CAN or RS-485 The EPAD2 and CPAD2/CPAD3 series are multichannel modules and combine analog signal conditioning and A/D converter in an extremely
More information500mA Laser Diode Controller
IP500 500mA Laser Diode Controller Operating Manual THORLABS, Inc. Ph: (973) 579-7227 435 Route 206N Fax: (973) 300-3600 Newton, NJ 07860 USA www.thorlabs.com Table of Contents TABLE OF FIGURES 1 OVERVIEW
More informationTxBlock-USB Transmitter
Transmitter TEMPERATURE TRANSMITTER - OPERATING MANUAL V1.0x I INTRODUCTION The TxBlock-USB is a 4-20 ma 2-wire temperature transmitter for head mount, powered by the current loop. The output current is
More informationKMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page: http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com Operating instructions RPM8000-OBD2
More informationNOTE: Fully read and understand this manual before using this Digital Multimeter.
ASTROAI USER MANUAL AUTO RANGING DIGITAL CLAMP METER Thank you for purchasing the Auto Ranging Digital Clamp Meter from AstroAI. The AstroAI Auto Ranging Digital Clamp Meter is designed to be safely and
More informationLock-In-Amplifier Module
Features BNC Connectors for Input and Output Signals Rugged Aluminium Housing Single Phase Detection with X Output Working Frequency 5 Hz... 10 khz, Digital Phase Shifter 0... 360 Parameter Control by
More informationRIGOL Data Sheet DM3058/DM3058E Digital Multimeter Product Overview Applications Easy to Use Design Main Features owerful Measurement Functions
RIGOL Data Sheet Product Overview DM3058/DM3058E [1] is a digital multimeter designed with 5 ½ digits readings resolution and dual-display especially fitting to the needs of high-precision, multifunction
More informationDA-Type Socket Assemblies
DA-Type Socket Assemblies Socket Assemblies with Transimpedance Amplifier (DA Type) DA type socket assemblies contain an active voltage-divider circuit and an amplifier that converts high impedance current
More informationEPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface
EPAD & CPAD Modules Automotive Energy & Power Analysis Aerospace & Defense Transportation General Test & Measurement EPAD2/CPAD2/CPAD3 Modules Modules with CAN or RS-485 The EPAD2 and CPAD2/CPAD3 series
More informationAT432 Low Voltage Adjustable Shunt Regulator
FEATURES DESCRIPTION Low voltage operation (down to 1.24V) Wide operating current range 80µA to 100mA 0.2Ω Typical output impedance Voltage reference tolerance 1% for B series and 0.5% for A series Pin-to-Pin
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationUniversal Dummy Cell 2. Operator's Manual
Universal Dummy Cell 2 Operator's Manual Copyright 2003, Gamry Instruments, Inc. All rights reserved. Printed in the USA. Revision 1.0 May 5, 2003 Copyrights and Trademarks UDC2 Universal Dummy Cell 2
More informationMCR-C-UI-UI-DCI MCR 3-Way Isolation Amplifier, Configurable
MCR-C-UI-UI-DCI MCR 3-Way Isolation Amplifier, Configurable 1. Short description configurable inputs and outputs signal conversion/amplification 3-way-isolation zero/span adjustment 17.5 mm ME housing
More informationIntegrated Servo Motor UCS57
Integrated Servo Motor Introduction is a new generation of high performance digital integrated servo drive motor, which is a series of low voltage AC servo products integrated with AC servo motor and drive
More informationThank you again for choosing AstroAI, if you have any questions or concerns regarding your product, please contact us at
ASTROAI USER MANUAL DT132A 4000 Count Auto-Ranging Multimeter Thank you for purchasing the AstroAI DT132A 4000 Count Auto-Ranging Multimeter. It is a 3 ¾ digit, 3999 counts, auto-ranging digital multimeter.
More informationVariTrans P V. Safe and Sound.
1000 V. Safe and Sound. VariTrans P 29000 Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Isolation Amplifiers
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationSolid State Pressure Sensors D8M
Solid State Pressure Sensors D8M Solid State Pressure Sensors with Analog, Pulse or Frequency Outputs Compact housing measures 30L x 30W x 12.4H mm. Accept 4 mm OD tubing (D8M-A1, -R1); 3 mm OD tubing
More informationDifferential charge amplifier
Electronics Differential charge amplifier Type 5181A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure
More informationS200 I/O System Units
S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features
More information1. SAFETY 1.1. SAFETY INFORMATION 1.2. SAFETY SYMBOLS
To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
More informationTemperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationE Charge-controlled amplifier module
Technical Note E-506.10 Charge-controlled amplifier module Description... 1 Charge-controlled piezo operation... 1 Position servo-control operation... 1 CE conformity... 2 Safety notes... 3 Operating controls...
More informationOPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE TEC-B-01M VOLTAGE CLAMP MODULE FOR EPMS SYSTEMS. VERSION 1.2 npi 2014
OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE TEC-B-01M VOLTAGE CLAMP MODULE FOR EPMS SYSTEMS VERSION 1.2 npi 2014 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany Phone +49 (0)7141-9730230;
More informationD7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
More informationIsolation (ISO), Special Overvoltage functions protection (OP) Voltage measurement PAD-V8-P 8 Voltage, up to ±50 V BW: 6 Hz ISO: 350 V DC
Selection Guide PAD Series Modules Multi channel Low bandwidth - for static signals Isolation Digital output (RS-485) Exchangeable For DEWETRON systems with built-in DAQ rack Module # CH Input type Ranges
More informationDIGITAL MULTIMETER AX-588B
DIGITAL MULTIMETER AX-588B OPERATION MANUAL 1. Sumary His series product is a stable and battery-driven 3 ½ digital multimeter with high reliability. It adopts LCD screen with character height of 28mm;
More informationShenzhen Tuofeng Semiconductor Technology Co., Ltd
TF PROGRAMMABLE PRECISION REFERENCES The is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between (Approx. 2.5V) and 36V with two
More informationRTD Input Module. Product Specifications and Installation Data 1 DESCRIPTION 2 INSTALLATION
RTD Input Module Product Specifications and Installation Data 1 DESCRIPTION The HE693RTD720 Input Modules allow RTD temperature sensors to be directly connected to the PLC without external signal processing
More informationUser Manual Digital Multimeter
User Manual Digital Multimeter model no.: MSR-R500 Questions or Concerns? support@etekcity.com visit etekcity.com for more products Safe and Proper Usage Thank you for purchasing the Etekcity MSR-R500
More informationSignet 9950 Dual Channel Transmitter
Signet 9950 Dual Channel Transmitter Member of the SmartPro Family of Instruments Features One instrument for multiple sensor types Multiple language support for (Gen 2a) or later in Simplified Chinese,
More informationASK Cards. Features Analog signal isolation Digital signal isolation. Applications
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Product Information Features System Sources
More informationProfiScale MULTI Multimeter
1,5 V 9V 200 mv 600 V 200 ma 1/10 A ProfiScale MULTI Multimeter en Operating instructions BURG-WÄCHTER KG Altenhofer Weg 15 58300 Wetter Germany Introduction Want the reassurance of knowing whether current
More informationBATTERY HiTESTER BT3563, BT3562, 3561
BATTERY HiTESTER BT3563, BT3562, 3561 Simultaneous high-speed measurement of internal resistance and battery voltage From large-cell to high-voltage battery testing - HIOKI is The Choice The BT3563, BT3562,
More informationAnalog Modules AS-i IP20
(Figure similar) Figure Type Inputs analog 4... 20 ma / 4... 20 ma / 4... 20 ma Pt100 4 x thermocouple type J 4 x thermocouple type K Outputs analog 0... 20 ma / 0... 20 ma / -10 V... +10 V Input voltage
More informationAT431 Adjustable Precision Shunt Regulators
FEATURES DESCRIPTION Programmable Output Voltage to 40V Voltage Reference Tolerance 1.0% for B Series and 0.5% for A Series Low Dynamic Output Impedance 0.22Ω Sink Current Capability of 0.1mA to 100mA
More informationTemperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More informationDVM98. True RMS Digital Multimeter. 1 Safety information. 1.1 Preliminary. 1.2 During use
True RMS Digital Multimeter DVM98 1 Safety information This multimeter has been designed according to IEC - 1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 510-S/SP13 I PN = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
More informationOPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE. ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output
OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output VERSION 4.0 npi 2014 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany
More informationModel 3102D 0-2 kv H.V. Power Supply
Features Compact single width NIM package Regulated up to ±2000 V dc. 1 ma output Noise and ripple 3 mv peak to peak Overload and short circuit protected Overload, inhibit and polarity status indicators
More informationXPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
More information8558A 8 1/2 Digit Multimeter
8558A 8 1/2 Digit Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks
More information6.6 Analog input module SM 331; AI 8 x 13 Bit; (6ES7331-1KF02-0AB0)
Order number 6ES7331-1KF02-0AB0 Properties 8 inputs in 8 channel groups Programmable resolution at each channel group (12 bits + sign) Programmable measurement type per channel group: Voltage Current Resistance
More informationTN-2 Interfacing with UltraVolt High Voltage Power Supplies Models A, AA, C, 10A-25A, 30A-40A, and F Series
Introduction Interfacing with UltraVolt High Voltage Power Supplies Models A, AA, C, 10A-25A, 30A-40A, and F Series In this Technical Note, we provide tips for interfacing with the interconnection pins
More informationSDM3045X Digital Multimeter. DataSheet
SDM3045X Digital Multimeter DataSheet-2018.12 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for
More informationIMP-2A ELECTRODE IMPEDANCE TESTER SINGLE CHANNEL
MicroProbes for Life Science IMP-2A ELECTRODE IMPEDANCE TESTER SINGLE CHANNEL User Instructions Version: October, 2015 18247-D Flower Hill Way Gaithersburg, MD 20879 Phone: +1 301 330-9788 Fax: +1 301
More informationLow Cost Three-Axis Fluxgate Sensor GFS-E. Measurement Range up to ±1000μT Output Voltage Calibration Error: 0.5% Noise 20pTrms/ Hz at 1Hz
Handheld 3-Axis Gaussmeter Gaussmeter Fluxgate Low Cost Three-Axis Fluxgate GFS-E Measurement Range up to ±1000μT Output Voltage Calibration Error: 0.5% Noise 20pTrms/ Hz at 1Hz Description: Low Cost Three-Axis
More information2002 IS Catalog. Page
Page Introduction... 95 Current Repeaters/Drivers (Single-channel) KFD0-CS-Ex1.50P (Transmitter, positioner and indicator)... 96 KFD0-CS-Ex1.51P (Positioner and fire detector)... 97 KFD0-CS-Ex1.52 (Current
More informationValve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
More informationINSTRUCTION MANUAL DIGITAL MULTIMETER
INSTRUCTION MANUAL DIGITAL MULTIMETER 600 OFF 600 20 2m 2 20m m m 2M 10A k 20k 2k O C NPN PNP hfe E B C E 10A DC 10A MAX UNFUSED MAX 600V COM V ma ma MAX FUSED CAT II 600V Thanks for buying our products,
More informationUniversity of Jordan School of Engineering Electrical Engineering Department. EE 204 Electrical Engineering Lab
University of Jordan School of Engineering Electrical Engineering Department EE 204 Electrical Engineering Lab EXPERIMENT 1 MEASUREMENT DEVICES Prepared by: Prof. Mohammed Hawa EXPERIMENT 1 MEASUREMENT
More informationINSTRUCTION MANUAL Redox sensor M 1322 C
INSTRUCTION MANUAL Redox sensor M 1322 C From version 2.01 2013 Controlmatik ABW d.o.o. 2 1. General... 7 1.1 Assembly... 8 1.2 Storage of Redox probes... 9 1.3 Connection to the electrical power supply...
More informationDOCUMENTATION. Its affordable price allows you to meet your budget target.
DOCUMENTATION ULCOS is a real concentrate of technology, mixing performance and versatility. It is able to meet your high level expectation, for technical tender specifications. Its affordable price allows
More informationUSER MANUAL QSM-606AZ QSM-612AZ QSM-624AZ MIXER AMPLIFIER
USER MANUAL QSM-606AZ QSM-612AZ QSM-624AZ MIXER AMPLIFIER WARNING: THIS APPLIANCE MUST BE EARTHED IMPORTANT The wires in the mains lead are coloured In accordance with the following code: Green and Yellow:
More informationAI 043 S-DIAS Analog Input Module
AI 043 S-DIAS Analog Input Module Date of creation: 04.06.2014 Version date: 18.10.2017 Article number: 20-009-043-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: +43/6274/4321 Fax: +43/6274/4321-18
More informationTARAline CS4. Data Sheet
TARAline CS4 indicator Application Chlorination agents Measuring system Electronic Information about the measuring range of sensors with 4-20 ma Accuracy after calibration at repeatability conditions (25
More informationDIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES
Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The
More information200GTL ALIGNMENT REVISION: 1.0 BURKE MODEL: 200GTL REVISION: 1.2 DATE: 02/14/06. Total Pages: 6 pages. Page:1 print date: 9/23/09
ALIGNMENT PROCEDURE MODEL: 200GTL REVISION: 1.2 DATE: 02/14/06 PREPARED BY: BURKE Total Pages: 6 pages Page:1 print date: 9/23/09 1 TEST CONDITION: 200GTL ALIGNMENT INSTRUCTION 1.0. TEST TEMPERTAURE: 77
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15195-01-02 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.10.2017 to 29.07.2019 Holder of certificate: Rohde
More informationSpecifications. PCI Bus. Analog Input Input Characteristics
Specifications A This appendix lists the specifications of the NI 6034E/6035E/6036E. These specifications are typical at 25 C unless otherwise noted. The first section provides the specifications for the
More informationEC301 Potentiostat / Galvanostat
User Manual EC301 Potentiostat / Galvanostat Stanford Research Systems Revision 1.2 (12/12/2017) Certification Stanford Research Systems certifies that this product met its published specifications at
More informationTL431 PROGRAMMABLE PRECISION REFERENCES FEATURES FUNCTION BLOCK DIAGRAM.
PROGRAMMABLE PRECISION REFERENCES The TL43 is three-terminal adjustable shunt regulator with specified termal stability. The output voltage may be set to any value between V REF (Approx. 2.5V) and 36V
More information72x36. Digital panel meter with microprocessor based technology 4-digit PVE4, PTE4, PFE4, PFL4. Galvanically insulated
P VA Digital panel meter with microprocess based technology digit PVE, PTE, PFE, PFL Galvanically insulated free scalable s/hysteresis Analogue galvanically insulated Min/max memy status //0 panelmeterx6analog_gb.doc
More information