DIGITAL PANEL METERS. Overview of product range. Product selection guide. Info & advice. µdigi1 and µdigi2 ranges

Transcription

1 ENERGY METERS Overview of product range General overview Product selection guide by functions by applications Info & advice Keeping up with current changes µdigi and µdigi ranges x8 mm or 8x9 mm format - for industrial applications C.A 00, C.A 0 and C.A 00 ranges 8x9 mm format - for universal applications Synchronization instruments Synchro coupler 9 9

2 General overview Digital Panel Meters

3 Product selection guide 0? µdigi and µdigi ranges µdigi 0 µdigi 08 ENERGY METERS C.A 00, C.A 0 and C.A 00 ranges C.A 00 C.A 0 C.A 00 0 Synchronization instruments Synchro coupler SELECTION GUIDE INFO & ADVICE

4 Product selection guide Digital Panel Meters

5 SELECTING A PANEL METER ENERGY METERS µdigi µdigi ranges 08 0 C.A 00 C.A 0 C.A 00 ranges 0 µdigi µdigi CA 00 CA 0 CA 00 Format of front panel x 8 8 x 9 8 x 9 8 x 9 8 x 9 ADC resolution ± bits ± bits ± bits ± bits ± bits Number of digits displayed / / AC Ammeter µdigi E µdigi AAC C.A 00-E AC Voltmeter µdigi E µdigi VAC C.A 00-E Frequency meter µdigi F C.A 00-F C.A 00-D DC Ammeter µdigi E µdigi ADC C.A 00-E DC Voltmeter µdigi E µdigi VDC C.A 00-E Process signals µdigi P/LP µdigi PRC C.A 0-M C.A 00-P Measurement functions Thermocouple thermometer µdigi T µdigi TTC C.A 0-M C.A 00-T Pt 00 thermometer µdigi TPT C.A 0-M C.A 00-T Tachometer µdigi F µdigi TAC C.A 00-F C.A 00-D Counter C.A 00-I C.A 00-D Chronometer C.A 00-I C.A 00-D Load cell C.A 0-M C.A 00-C Potentiometer C.A 0-M C.A 00-P Special functions MIN/MAX µdigi ALP Analogue outputs Option Option Option RS output Option Option Option Outputs RS8 output µdigi ALP Option Option Option Threshold output(s) Option Option Option Option User-programmable Product advantages BCD output Economical programmable range for industrial use Programmable range for universal use Option GENERAL OVERVIEW INFO & ADVICE

6 Info & advice Digital Panel Meters KEEPING UP WITH CURR Digital panel meters are used to display an analogue value clearly and precisely. The digital processing allows these instruments to display different values, but also to connect them to external measurement or supervision systems. Several criteria influence the choice of a digital panel meter, the first of these being the scale or the measurement range, defined by the variation range of the signal to be measured. The resolution The number of display counts defines the resolution of the panel meter. The resolution is the necessary variation of the measurement signal required to vary the reading by one point. For a given rating, the greater the display capacity, the better the resolution. As an example, for an -bits (,000-counts) panel meter with a 0 V calibre, the resolution is 0 mv. However, for industrial applications, it is not always wise to choose a digital panel meter of too high resolution. The measurement signal may be subject to noise interference, resulting in the permanent instability of light weight display units. Accuracy Accuracy, which is not to be confused with resolution, defines the maximum variation between the instrument reading and the true value of the signal measured. It is expressed in the form: E = x % of the reading ± y counts. The first term is relative to the conversion method and the precision of the components, and the second to the different drift, dispersion, fluctuation and noise factors that can affect the instrument. The error is therefore constant over the entire measurement range. This is one of the main advantages of the digital panel meter over the galvanometer, where the most accurate readings are obtained at the end of the scale.

7 ENT CHANGES Format The format and the weight of the instrument must also be taken into consideration, affecting as they do the dimensioning of electrical cabinets. The format 8x9 (DIN standard 00) is the industrial standard. Alongside this, panel meters of reduced dimensions, such as the x, have proven especially useful for smaller-sized machines and embedded equipment. Display The visibility of panel meter display characters is directly linked to the light difference between the these and the screen background. LEDs, LCDs and backlit LCDs offer different levels of readability. LED technology, used on most of the ENERDIS range of digital panel meters, offers the best display contrast. A choice of red, green and amber colours also ensures they are easy to read. Display only or multifunction products? Panel meters are increasingly universal, and must be able to display both strong signals, such as the voltage of a network, and weak signals such as process signals. Instruments with multiple inputs, calibres and outputs are increasingly equipped with digital interfaces (RS, RS8) for remote communication, analogue outputs, and relay or alarm interfaces for connection to logic controllers. Number of digits and display points The display of a digital panel meter is characterized by the number of digits. We speak, for example, of / digit or / digit panel meters. A full digit has 0 possible states, in other words all values between 0 and 9. A / digit has a maximum value of and is capable of states: 0 and. A / digit can display a maximum value equal to and may comprise states: 0,,,. We can therefore expect a / digit panel meter to be capable of counting up to,000 (0 to,999), and a / digit panel meter to be capable of counting up to 0,000 (0 to,999). For this, the real display range of the apparatus must not be inferior. HOW TO GET THE BEST OUT OF YOUR PANEL METER Environment Digital panel meters, in general, are intended for interior use, their electronic circuit being sensitive to difficult climatic environments (in contrast to analogue panel meters, which are suitable for both interior and exterior use). They must also support emissions stimulated and emitted by the electrical equipment. Maintenance Unlike the analogue panel meter, the digital panel meter accepts low currents (maximum 00 V and A). It therefore requires only minimum precautions for the use of currents and voltages. QUIZ Test your knowledge: How many points can be displayed by a / digit panel meter? 0-,000 counts 0-,999 counts 0-9,999 counts What character colour gives the greatest readability? White Blue Red What is the format most widely used? x8 mm 8x9 mm x9 mm GENERAL OVERVIEW SELECTION GUIDE 99 0 ENERGY METERS Consult the answers on: 0 0

8 µdigi range Digital Panel Meters µdigi-lp -0 ma process signal µdigi-p U/I process signal µdigi-e AC/DC voltage/current µdigi RANGE x 8 mm programmable panel meters for industrial use Plug-in connectors for quick and easy connection Display with levels of brightness Remote configuration of the µdigi-alp via the RS8 serial link µdigi-t Temperature (Pt00, thermocouple) µdigi-f Frequency, rpm, pulse µdigi-alp Process signals with alarms PRODUCT ADVANTAGES Display with LEVELS OF BRIGHTNESS Instant MOUNTING WITHOUT TOOLS SIMPLE PROGRAMMING using keys COMPACT DIMENSIONS -POINT LINEARIZATION of the input signals on the µdigi-alp Programming Quick and easy: - Local programming using the keys of the keyboard. Only the instructions required for the application are shown. No mistakes are possible. Access to programming can be protected on all the instruments. - Remote programming with the µdigi-prg software available free on the site for the µdigi-alp with RS8 option.

9 µdigi-lp -0 ma process signal µdigi-p U/I process signal µdigi-e U/I voltage and current Input: -0 ma Display range: -, ,999 Input: Vdc Vdc Vdc ( MΩ) Vdc (00 MΩ) madc (. Ω) Display range: -, ,999 T O O R D E R Input: 00 Vac 00 Vac Vdc Vdc ( MΩ) Aac Aac Adc - + Adc ( mω) Display range: -,999 9,999 (dc) 0 9,999 (ac) ENERGY METERS Power supply Self-powered (active loop) P µdigi-t Temperature (Pt00 and thermocouple) Power supply 8 - Vac & Vdc P Vac & Vdc P0 0 0 µdigi-f Frequency, rpm, pulse Power supply 8 - Vac & Vdc P Vac & Vdc P0 0 0 µdigi-alp Process signal with alarms Pt00 : C C -8 +, F C J : C -8 +, F K : -0 +,0 C -8 +,8 F T : C -8 + F Display range: -,999 9,999 Frequency meter: 0.0 Hz... khz (voltage 0 to 00 Vac) Tachometer: Magnetic Vin > 0 mv rms (0 Hz) Vin > 00 mv rms ( Hz) NAMUR Rc =. kω ; Ion < ma ; Ioff > ma NPN/PNP Rc =.9 kω (NPN) ;. kω (PNP) 0 <. V / >. V Encoder/TTL/V 0 <. V / >. V SWITCH Vc = V (internal) Rc =.9 kω (internal) Fc = 0 Hz Display range: 0 9,999 Entrée : Vdc Vdc ( MΩ) mvdc (00 MΩ) madc (. mω) Display range: -,999 9,999 -segment signal linearization T O O R D E R Power supply 8 - Vac & Vdc P Vac & Vdc P0 0 0 Associated products Voltmeter / ammeter switches 9 Current transformers & shunts Power supply 8 - Vac & Vdc P Vac & Vdc P0 0 0 Thermocouple / probe Catalogue Power supply Option 8 - Vac & Vdc - P Vac & Vdc - P Vac & Vdc RS8 P Vac & Vdc RS8 P0 0 0 SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD

10 µdigi range Digital Panel Meters µdigi RANGE x 8 mm programmable panel meters for industrial use Display µdigi-lp µdigi-p µdigi-e µdigi-t µdigi-f µdigi-alp ADC Resolution bits ± bits Measurement rate /s /s Display range -,999 9,999 -,999 9,999 -,999 9,999 (dc) 0 9,999 (ac) -,999 9, ,999 -,999 9,999 -segment red LED display Height 0mm Height 8mm Reading digits Polarity automatic Overrun OVE display Decimal position Programmable using software Accuracy µdigi-lp µdigi-p µdigi-e µdigi-t µdigi-f µdigi-alp ±0. % + counts ± 0.% + counts - ± 0.% + counts for 00 V/Aac inputs Pt00 C : ±0. % + count (Res ) - ±0. % + counts (Res 0. ) F : ±0. % + counts (Res ) - ±0. % + counts (Res 0. ) "J, K and T" thermocouples C : ±0. % + counts (Res ) F : ±0. % + counts (Res ) ±0.0 % + count ±0. % + count Mechanical specifications Material polycarbonate as per UL9 V-O Weight 0 g 0 g (µdigi-lp) 0 g (µdigi-alp) Protection rating front panel IP Mounting on panel with self-locking strap Environment Operating temperature -0 C to +0 C Storage temperature - C to + 8 C Relative humidity < 9% at +0 C Max. altitude,000 m Power supply High level Low level Consumption 8/ Vac 0/0 Hz 00/00 Vdc / Vac 0/0 Hz 0./0 Vdc. W (< W for µdigi-alp)

11 Standards Insulation dielectric strength: EN 00- (category II installation) EMC immunity/emission: EN 000--, EN 000--, EN / EN 0 (EN for µdigi-lp and µdigi-alp EN and EN for µdigi-alp) Dimensions (in mm) ENERGY METERS µdigi-lp µdigi-p µdigi-e µdigi-t µdigi-f µdigi-alp (a) 0 mm 0 mm 00 mm Panel drilling specifications (in mm) SELECTION GUIDE INFO & ADVICE RANGE INFO

12 µdigi range Digital Panel Meters µdigi VAC AC VOLTAGE µdigi VDC DC VOLTAGE µdigi TPT TEMPERATURE Pt 00 µdigi PRC PROCESS SIGNAL U/I µdigi RANGE Programmable panel meters in 8 x 9 mm format for industrial applications Easy programming using three front panel keys Accessories for surface and DIN rail mounting Quick connection using plug-in connectors Easy installation of card options µdigi AAC AC CURRENT PRODUCT ADVANTAGES µdigi ADC DC CURRENT ECONOMICAL single-function range INSTANT FITTING without tools µdigi TTC Thermocouple Temperature Mounting accessories Multi-position fitting with DIN rail adapter Back fitting with DIN rail adapters P0 9 0 P0 9 0 Optional card -relays alarm card P0 9 0 µdigi TAC TACHOMETER

13 µdigi VAC AC Voltage µdigi VDC DC Voltage µdigi TPT Temperature Pt 00 µdigi PRC Process Signal U/I ENERGY METERS Direct (0 Hz to khz) : 0 V (90 kω) 00 V ( MΩ) 00 V ( MΩ) Direct : 0 V (90 kω) 00 V ( MΩ) 00 V ( MΩ) C (0 Ω/wires) C (0 Ω/wires) 0 ±0 V ( MΩ) 0 ±0 ma (. Ω) Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F T O O R D E R Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F µdigi AAC AC Current µdigi ADC DC Current µdigi TTC Temperature Thermocouple µdigi TAC Tachometer Direct or on CT (0 Hz to khz) : A (0.0 Ω) A (0.0 Ω) On shunt (0 Hz to khz) : 00 mv ( kω) 0 mv (00 mω) Direct : A (0.0 Ω) A (0.0 Ω) On shunt : 00 mv ( kω) 0 mv (00 mω) J : C C K : C -0 +,0 C T : C Frequency: 0 to 999,9 Hz Speed: 0 to 9,999 counts Magnetic sensor: Vin > 0 mvrms NAMUR sensor Encoder TTL/ V or NPN/PNP Dry contact Voltage: 0 to 0 Vac T O O R D E R Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F Supply /0 Vac 0 0F /8 Vac 0 0F Vdc 0 0F Vdc 0 0F 8 Vdc 0 0F Supply /0 Vac 0 08F /8 Vac 0 08F Vdc 0 08F Vdc 0 08F 8 Vdc 0 08F Associated products Voltmeter and ammeter switches 9 Accessories and option cards 08 CT Current transformers and shunts Thermocouple / probe Catalogue SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD

14 µdigi range Digital Panel Meters µdigi RANGE Programmable panel meters in 8 x 9 format for industrial applications Display ADC resolution ± bits AAC, VAC, ADC, VDC, PRC -,999 9,999 Display range TPT, TTC -,999,999 TAC frequency TAC speed 0 9,999 Display indicators Red LED segments Height. mm Reading digits Polarity Automatic Overrun OVE displayed Decimal position Programmable by software AAC, VAC, ADC, VDC, PRC measurements / second Measurement rate TPT, TTC measurements / second TAC 0. Hz to to khz Accuracy AAC, VAC, ADC, VDC, PRC ±0. % ± counts TPT network 0. C ±0. % +0. C TPT network C ±0. % + C TTC tc J, K, T : 0. C ±0. % +0. C TTC tc J, K, T : C ±0. % + C TAC 0. % ± pts Mechanical specifications Material Weight Protection rating Fitting polycarbonate V0 as per UL9 0 g IP on front panel On panel using self-locking Environment Operating temperature - 0 to + 0 C Storage temperature - to + 8 C Relative humidity < 9 % at + 0 C Maximum altitude,000 m Power supply AC voltage Consumption DC voltage Consumption / 0 Vac ± % 0 / 0 Hz / 8 Vac ± % 0 / 0 Hz VA Vdc (0- Vdc) Vdc (- Vdc) 8 Vdc (- Vdc) W

15 Standard Low voltage directive //CEE Insulation - dielectric strength IEC 00- Dimensions (in mm) ENERGY METERS Panel drilling specifications (in mm) (drilling) (drilling) SELECTION GUIDE INFO & ADVICE RANGE INFO

16 The C.A 00 range Digital Panel Meters C.A 00-E C.A 00-F C.A 00 RANGE Programmable digital panel meters in 8 x 9 format for universal use Easy programming using three front panel keys Accessories for surface and DIN rail mounting Quick connection using plug-in connectors Easy installation of card options C.A 00-I PRODUCT ADVANTAGES REDUCED DEPTH for easy installation in cabinets and on equipment RECORDING of maximum and minimum values of input variable SERIAL LINK for remote processing of measurement data Description With its communication option, the C.A 00 is suitable for supervision via a PC, logic controller or any other "master" system: the measurement readings may be obtained on PC via a serial link. Optional cards* Card C.A XXX AL Relays P0 9 0 Card C.A 00 RS/RS8 communication P0 9 0 *Additional cards (complement or replacement) Mounting accessories Multi-position fitting with DIN rail adapters P0 9 0 Rear fitting with DIN rail adapters P0 9 0 Connector + m RS cable P0 9 0 Connector + m RS8 cable P0 9 0 Kit of x C.A 00 screw connectors P0 9 0 Converter RS F/RS8 - screw P0 9 0

17 C.A 00-E Electrical quantities AC/DC C.A 00-F Frequency meter / Tachometer C.A 00-I Counter / Chronometer ENERGY METERS Voltage ( ratings) : 00 Vac/dc max - 80 Hz max Current ( ratings) : Aac/dc max Shunt ( ratings) : 00 mv max Magnetic sensor: Vin > 0 mveff NAMUR sensor: Ion < madc / Ioff > madc Rc = kω TTL/V encoder or NPN/PNP sensor: "" >. Vdc / "0" <. Vdc Dry contact: Vc = V / Rc =.9 kω Fc = 00 Hz Voltage: 0 to 0 Vac (Fmin 0. Hz / Fmax khz) Magnetic sensor: Vin > 0 mveff NAMUR sensor: Ion < madc / Ioff > madc Rc = kω TTL/V encoder or NPN/PNP sensor: "" >. Vdc / "0" <. Vdc Dry contact: Vc = V / Rc =.9 kω Fc = 00 Hz (Fmin 0. Hz / Fmax khz) T O O R D E R Customized products E.g. Model Auxiliary power supply Alarm Analogue output Digital communication C.A 00-E X X /0 Vac: Vdc: /8 Vac: Vdc: without: X relays: without: X -0 ma: options maximum without: X RS/RS8: Associated products Voltmeter and ammeter switches Accessories and option cards CT Current transformers and Shunts Thermocouple / probe SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD Catalogue

18 C.A 00 range Digital Panel Meters C.A 00 RANGE Programmable digital panel meters format 8 x 9 mm Displays C.A 00-E C.A 00-F C.A 00-I Measurement points ± bits Frequency meter : Counter : Etendue d'affichage DC : 0 9, ±9,999 AC : ,999 Tachometer : Chronometer : 0 9, s 9,999 h Display indicators Red LED segments, Height, mm Reading digits Polarity automatic Overrun OVE displayed Decimal position Programmable by software Display blocking Function MIN / MAX Display rate measurements/second < measurement/second < measurement/second Response time 00 ms 0. to 9.9 s - OFFSET function OFFSET C.A 00-E C.A 00-F C.A 00-I pushbutton memorization Sensor excitation C.A 00-E C.A 00-F C.A 00-I Sensor excitation 8 V or Vdc/0 ma 8 V or Vdc/0 ma Accuracy C.A 00-E C.A 00-F C.A 00-I dc : 0. % Measurements ± counts ±0. % ±0.0 % ac : 0. % ± counts ± count ± counts Temperature coefficient 00 ppm/ C 0 ppm/ C 0 ppm/ C Mechanical specifications Material Polycarbonate VO as per UL Weight 0 g (without option) 0 g (without option) Protection rating IP on front panel Fitting On panel using self-locking strap

19 Environment Operating temperature 0 to +0 C Storage temperature - to +8 C Relative humidity < 9 % at +0 C ENERGY METERS Supply AC voltage Consumption DC voltage Consumption bivoltage /0 Vac ± % 0/0 Hz bivoltage /8 Vac ± % 0/0 Hz VA 0. Vdc or Vdc W Standards Low voltage directive //EEC Isolation - dielectric strength IEC 0- Dimensions (in mm) Panel drilling specifications (in mm) (drilling) (drilling) SELECTION GUIDE INFO & ADVICE RANGE INFO 0 0

20 C.A 0 range Digital Panel Meters C.A 0-M C.A 0 RANGE 8 x 9 mm programmable digital panel meter. Process, temperature and load cell in the same product. display colours Quick connection using plug-in connectors (spring-cage type) Remote configuration via the RS or RS8 serial link PRODUCT ADVANTAGES PRODUCT, FUNCTIONALITIES DISPLAY COLOURS INSTANT MOUNTING WITHOUT TOOLS INPUT SIGNAL LINEARIZATION OVER 0 SEGMENTS SERIAL LINK for remote processing of measurement data PREPROGRAMMED COMMAND FUNCTIONS available on isolated inputs Description The C.A 0-M is a -in- programmable panel meter which can be configured for process, temperature or load-cell signals. The serial link allows remote processing of the measurements on a PC. The CA0-PRG software, available free of charge from the site allows direct reading of the measurements, as well as remote configuration and programming of one or more connected panel meters. It can also be used to save and retrieve the configuration of an existing panel meter. Optional cards* Model Card C.A XXX AL relays P0 9 0 Card C.A XXX AL relays P0 9 0 Card C.A XXX AL NPN P0 9 0 Card C.A XXX COM RS P0 9 0 Card C.A XXX COM RS8 P0 9 0 Card C.A 0 Output 0-0 V P0 9 0 Card C.A 0 Output - 0 ma P0 9 Accessories Model Multiple mounting with DIN-rail adapters P0 9 0 Connector + m cable RS P0 9 0 Connector + m cable RS8 P0 9 0 * Extra cards (addition or replacement)

21 Process input Measurement of process signals from the most widely-used low-level sensors, in the ±0 V or ±0 ma range. The panel meter can also be connected to a potentiometric converter to measure displacement, length, etc. Temperature input Temperature measurement using thermocouple probes (J, K and T) and Pt00 probes.the measurements can be displayed in C or F, with a resolution of one degree or one tenth of a degree. Load cell input Measurement of loads (masses, forces, torques, pressures, etc.) using low-level sensors such as strain gauge bridges. Options available Card with alarms on relays Outputs Max. voltage Max. current x RT relays 0 Vac or Vdc 8 A at 0 Vac or 8 A at Vdc Card with alarms on relays Outputs Max. voltage Max. current x T relays 0 Vac or 0 Vdc 00 ma at 0 Vac or A at 0 Vdc ENERGY METERS Card with alarms on NPN transistor Outputs Max. voltage Max. current Communication card NPN optocouplers 0 Vdc 0 ma at 0 Vac Analogue output card Output signal V... 0 ma Accuracy 0.% ± digit Temp. coeff. 0. mv per K 0. ma per K Max. load > 00 Ω < 800 Ω Type of link RSC RS8 Protocol ISO, C.A protocol or ModBus/RTU Speed,00,,00,,800, 9,00 or 9,00 bauds RJ- with Output connector RJ9- double adapter (input and output) T O O R D E R Customized product Model Auxiliary power supply Alarm Analogue output Digital communication E.g. C.A 0-M X 8- Vac & Vdc : - Vac & 0.-0 Vdc : None : X relays : relays : transistors : None : X -0 ma : 0-0 V : None : X RS : RS8 : Associated products Voltmeter and ammeter switches 9 Current transformers and shunts Thermocouple / probe Catalogue SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD

22 C.A 0 range Digital Panel Meters C.A 0 RANGE 8 x 9 mm programmable digital panel meters Display C.A 0-M ADC resolution ± bits Measurement rate Load cell process 0 / second Pt00 / second CT 0 / second Display range - 9,999 to +9,999 Display units -segment programmable colour LED (red, green, amber), height mm Reading digits Polarity automatic Overrun -ouer Decimal position by programming Sensor excitation C.A 0-M Process V (0 ma) - 0 V / V (0 ma) Load cell 0 V (0 ma) - V (0 ma) Potentiometer 0 V (0 ma) Pt00 < ma dc Mechanical specifications C.A 0-M Material polycarbonate as per UL 9 V-0 Weight 0 g Protection rating IP on front panel Mounting On panel using self-locking strap Environment C.A 0-M Operating temperature -0 C to +0 C Storage temperature - C to +80 C Relative humidity < 9% at 0 C Maximum altitude,000 m Power supply High level Low level Consumption C.A 0-M 8/ Vac 0/0 Hz - 00/00 Vdc / Vac 0/0 Hz - 0./0 Vdc W without option, 8 W max. Special functions Reset to factory configuration Change of display colour Total or partial locking of programming by code Display with brightness levels Accuracy C.A 0-M Temperature coefficient 00 ppm/ C Warm-up time 0 minutes Measurements Process Voltage: mv Current: µa Load cell µv Potentiometer 0.00 % of the display Temperature 0. / (selectable)

23 Standards Insulation dielectric strength: EN 00- (Category II installation) EMC Immunity: EN 000--, EN 000--, EN 000--, EN 000--, EN 000--, EN EMC Emission: EN 0 ENERGY METERS Dimensions (in mm) Panel drilling specifications (in mm) (drilling) (drilling) SELECTION GUIDE INFO & ADVICE RANGE INFO

24 C.A 00 range Digital Panel Meters C.A 00-P C.A 00-C C.A 00-T C.A 00 RANGE Programmable panel meters in 8 x 9 mm format for universal use Easy programming using five front panel keys Accessories for surface and DIN rail mounting Quick connection using plug-in connectors Easy installation of card options C.A 00-D PRODUCT ADVANTAGES RECORDING of maximum and minimum values of input variable SERIAL LINK for remote processing of measurements LINEARISATION of input signal over segments Description On the instruments, two digital filters can be activated to stabilise the display of measurements depending on the processing conditions. The measurement display can be disabled remotely by closing a contact.the display and reset of MAX and MIN values can also be activated remotely. On the C.A 00-P and C.A 00-C, activation and cancellation of the OFFSET function can also be controlled remotely.the OFFSET command functions may be modified by the user, with functions in all being pre-programmed on the instruments. On the C.A 00-P and C.A 00-C models, the display can also be set to flashing mode to indicate an alarm threshold overrun. Option cards* Model Card C.A XXX AL relay P0 9 0 Card C.A XXX AL relay P0 9 0 Card C.A XXX AL NPN P0 9 0 Card C.A 00 analogue output P0 9 0 Card C.A 00 BCD output P Card C.A XXX RS Communication P0 9 0 Card C.A XXX RS8 Communication P0 9 0 Accessories Model Multi-position fitting with DIN rail adapters P0 9 0 Rear fitting with DIN rail adapters P0 9 0 Connector + m RS cable P0 9 0 Connector + m RS8 cable P0 9 0 Kit of x C.A 00 screw connectors P0 9 0 Converter RS F/RS8 - screw P0 9 0 * Additional cards (complement or replacement)

25 C.A 00-P Process signal U/I DC C.A 00-C Load cell ENERGY METERS Voltage : 0 to ±0 V on MΩ Current : 0 to ±0 ma on Ω Potentiometer : MΩ 0 to ± mvdc on 00 MΩ 0 to ±0 mvdc on 00 MΩ 0 to ±0 mvdc on 00 MΩ 0 to ±00 mvdc on 00 MΩ C.A 00-T Temperature C.A 00-D Frequency meter / Tachometer Counter / Chronometer tc J : -0 to +80 C / -8 to +, F tc K : -0 to +,00 C / -8 to +,9 F tc T : -00 to +00 C / -8 to + F tc R : 0 to,00 C / - to +,09 F tc S : 0 to,00 C / - to +,09 F tc E : -0 to +,000 C / -8 to +,89 F Pt 00 : -00 to +800 C / -8 to +, F Magnetic sensor:vin > 0 mvrms NAMUR sensor: Ion < madc / Ioff > madc / Rc = kω TTL/V encoder or NPN/PNP sensor: "" >. Vdc / "0" <. Vdc Dry contact: Vc = V / Rc =.9 kω / Fc = 00 Hz Voltage : 0 to 0 Vac (Fmin 0. Hz / Fmax khz) T O O R D E R Customized products E.g. Model Auxiliary power supply Alarm Analogue output Digital communication C.A 00-P X X /0 Vac : /8 Vac : 0/0 Vdc : without : X relays : relays : transistors : without : X 0-0 V / -0 ma : without: X RS : RS8 : BDC : * * Choice of the BCD output cancels the alarm and analogue outputs Associated products Voltmeter and ammeter switches Accessories and option cards CT Current transformers and Shunts Thermocouple / probe SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD Catalogue 0

26 C.A 00 range Digital Panel Meters C.A 00 RANGE Programmable digital panel meters in 8 x 9 format for universal use Display C.A 00-P C.A 00-C C.A 00-T C.A 00-D ADC resolution ± bits ± bits ± bits - Counter: ±,000 Tachometer: 0 99,999 Display range ±,000 ±,000 ±,000 Chronometer: 0.00 s to 9,999.9 h Frequency meter: 0 to,000 Display indicators Red LED segments, Height. mm Reading digits Polarity automatic Overrun OVE displayed Decimal position Programmable by software Display blocking MAX/MIN function Measurement rate measurements / second Response time ms (0,, or ms depending on filter programmed) Function C.A 00-P C.A 00-C C.A 00-T C.A 00-D OFFSET function on keyboard on keyboard by programming on keyboard Display blocking: Remote control ( logical inputs) pre-programmed functions 8 pre-programmed MIN/MAX/RESET functions and clear MIN/MAX/RESET display Sensor excitation Sensor excitation C.A 00-P C.A 00-C C.A 00-T C.A 00-D 0 ma at or 0 V or 0 ma at V 0 ma at or 0 V - 8 V or Vdc / 0 ma Accuracy C.A 00-P C.A 00-C C.A 00-T C.A 00-D Measurements 0. µa or 0. µa 0.0 % R ± counts 0. C or C 0.0 % R ± count Temperature coefficient 0 ppm/ C 00 ppm/ C 00 ppm/ C 0 ppm/ C Mechanical specifications Material Weight Protection rating Fitting Polycarbonate VO as per UL g (without option) 80 g (with options) IP on front panel On panel using self-locking strap

27 Environment Operating temperature 0 to +0 C Storage temperature - to +8 C Relative humidity < 9 % at +0 C ENERGY METERS Power supply AC voltage Consumption DC voltage Consumption bivoltage /0 Vac ± % 0/0 Hz bivoltage /8 Vac ± % 0/0 Hz VA without option, 0 VA max 0 to 0 Vdc W without option, 0 W max Standards Low voltage directive //EEC Insulation - dielectric strength IEC 0- Dimensions (in mm) Panel drilling specifications (in mm) (drilling) (drilling) SELECTION GUIDE INFO & ADVICE RANGE INFO 0 0 0

28 Synchro coupler range Digital Panel Meters Synchro coupler PID Synchro coupler SYNCHRO COUPLER RANGE LED display of measurements: phase, frequency and voltage Displays deviations between setpoint and measurement values User-programmable on front face PRODUCT ADVANTAGES INTEGRATED IN 9 x 9 FORMAT: Adjustments carried out in seconds (PID model) synchronization command adjustment command synchronization command modes Description The SYNCHRO COUPLER is an automatic synchronization instrument for generator sets. It includes: - a control relay for assisted manual coupling or automatic coupling with time delay control - two control relays (fast/slow) for speed adjustment - an external control loop for opening the coupling relay - four front panel keys for programming, display and messages (password option included)

29 SYNCHRO COUPLER PID SYNCHRO COUPLER ENERGY METERS Display: phase angle variations by 0 LEDs disposed in a circle voltages, frequencies, variations (in %) on digits frequency variations ±, status of coupler relay, conditions obtained in phase, frequency and voltage Display: as for synchro coupler PID adjustment method (Proportional Integral Derivative) for synchronization that is faster and more accurate than with conventional synchronous couplers Proportional: proportional correction of measurement errors Integral: guarantees reduction of adjustment error to 0 Derivative: brings greater stability to the system, enabling you to anticipate the inertia of generator sets (e.g. hydroelectric) T O O R D E R Power Supply 0 VAC LS9N X 0 VAC LS9N X 00 VAC LS9N X Power Supply 0 VAC LS9N X 0 VAC LS9N X 00 VAC LS9N X SELECTION GUIDE INFO & ADVICE RANGE INFO RANGE CONTD. 0 0

30 Synchro coupler range Digital Panel Meters SYNCHRO COUPLER RANGE Synchronization instruments for LV networks Electrical specifications Voltage inputs Nominal voltage 80 Vac Range 0 to 00 V Frequency 80 Hz Consumption < 00 µa Relay outputs Sealed inverter deviation 8 A - 0 Vac / A - 0 Vdc Multimeter measurements (accuracy) Phase angle deviation ± 0. Frequency ± 0.0 Hz Voltage (RMS) Class ± digits Auxiliary supply AC voltage - 0 % / + % Frequency...0 Hz Consumption 0 VA Environment Operating temperature -0 C to + C Storage temperature -0 C to +0 C Relative humidity < 90 % at 0 C Protection rating Pollution level Mechanical specifications Casing materials Casing and flange Front panel Protection rating Weight Connection Fitting Self-extinguishing black ABS Light grey polycarbonate IP front panel (IP optional) 0g Holder for. mm wire Mounting on 8 mm front panel

31 Mechanical specifications standards Safety IEC 00- Dimensions DIN 00 EMC EN - ANSI function Nos. and 90 Resistance to shock IEC Resistance to vibrations IEC Environment IEC 008- ENERGY METERS Electrical specifications Dimensions and drilling specifications (mm) Speed control SYNCHRO 9.0 Vg0 Vg F.G0 F.G V% F.% Enb V F Fitting flange Control loop Auxiliary supply G0 Generator G Panel cut-out SELECTION GUIDE INFO & ADVICE RANGE INFO 0 0