Low Cost Three-Axis Fluxgate Sensor GFS-E. Measurement Range up to ±1000μT Output Voltage Calibration Error: 0.5% Noise 20pTrms/ Hz at 1Hz
|
|
- April Barber
- 5 years ago
- Views:
Transcription
1 Handheld 3-Axis Gaussmeter Gaussmeter Fluxgate Low Cost Three-Axis Fluxgate GFS-E Measurement Range up to ±1000μT Output Voltage Calibration Error: 0.5% Noise 20pTrms/ Hz at 1Hz Description: Low Cost Three-Axis Fluxgate GFS-E, made by COLIY, is designed by the industry standard with a compact size (only 107 x 32 x 32mm), and could make magnetic field intensity directly converted into analog signals (±10V or ±5V). Typical applications are that geomagnetism detection, underwater magnetic field monitoring, wrapped detection, traffic monitoring, measuring residual magnetism, low-intensity magnetic field measurement, laboratory, etc. With output voltage calibration error of 0.5% and frequency response of DC to 1.5KHz, GFS-E Three-Axis Fluxgate has different measurement ranges to be chosen: ±100μT, ±500μT and ±1000μT. In addition, GFS-E has excellent linearity (<0.01%), orthogonality error (<1 ) and low noise ( 20pTrms/ Hz at 1Hz). Meanwhile, the temperature sensor can be chosen for temperature compensation. Low Cost Three-Axis Fluxgate GFS-E has two options for analog signal output: one is analog signal single-end output (±5V), to meet the low-voltage requirements of modern analog circuits; the other is analog signal single-ended output (±10V), to meet the traditional design requirements. Low Cost Three-Axis Fluxgate GFS-E is environmentally sealed with standard package or deep submersible package, and the protection class of standard package is IP67. GFS-E sensor with deep submersible package, can work underwater 500 meters, so it s ideal for monitoring the underwater magnetic field.
2 Features Low cost three-axis fluxgate sensor Measuring range: ±100μT to ±1000μT Compact size (107 x 32 x 32mm) Output Voltage Calibration Error: 0.5% Excellent linearity <0.01% Noise 20pTrms/ Hz at 1Hz Orthogonality error <1 Frequency response: DC- 1.5KHz Power supply: ±12V ~ ±17V [Option] Temperature sensor [Option] Analog single-end output (±5V) [Option] Standard package and deep [Option] Analog single-end output (±10V) submersible package GFS-E Specification: Model GFS-E100 GFS-E500 GFS-E1000 Performance Number of axes 3 Measurement Range Bandwidth(-3dB) X,Y,Z ±100μT ±500μT ±1000μT Vector R Measurement noise floor Start-up time Warm-up time 173μT 866μT 1732μT > 1.5KHz 20pTrms/ Hz at 1Hz 150ms 15mins Zero drift error ±50nT ±150nT ±300nT Zero drift temperature coefficient Field analog signal (Output voltage) Analog output impedance ±1nT/ ±5nT/ ±10nT/ ±10 V per axis (unbalanced, single ended ref. 0V) OR ±5V per axis (unbalanced, single ended ref. 0V) < 10 Ω Output Calibration Error <0.5% Temperature coefficient <±100ppm/ <±100ppm/ <±200ppm/ Orthogonality error < 1 Linearity error Hysteresis <0.01%(least squares fit)) <2nT for exposure to up to 2 x full scale Specification-- Temperature (Option) Measurement range -40 to +90 Output type Voltage 3-Axis Fluxgate 2 <<
3 Handheld Gaussmeter 3-Axis Fluxgate Voltage output mV at 30 Scaling Accuracy mV/ ±0.5 (over operating range) Specification-- Three-Axis Fluxgate Operating temperature - 40 to +70 Storage temperature - 40 to +85 Connected cable s length 1.5m (Default; Other lengths can be customized) Power consumption 1.5W Power supply ±12V ~ ±17V Environmental protection / sealing Dimension IP67 or deep submersible package (underwater 500 meters) 107 mm W 32 mm H 32 mm D Weight Certification 130g CE Certification, EMC Certification GFS-E s Dimension Specification >>3
4 Description Of Three-Axis Fluxgate Type Selection GFS -E V -T Principle GFS:3-Axis Fluxgate Grade -E: Cost Low Range 100: 100μT/ Axis 500: 500μT/ Axis 1000:1000μT/ Axis Analog Output Type -10V: ±10V (unbalanced, single ended ref. 0V) -5V: ±5V (unbalanced, single ended ref. 0V) Built-in Temperature -T: YES BLANK: None Note: 1, Example: GFS-E100-10V-T is a low cost (-E) 3-axis fluxgate sensor (GFS) with the range of 100T/ Axis (100), analog output[±10v] (-10V), and a built-in temperature sensor (-T). 2, GFS-E Three-Axis Fluxgate s cable length default is 1.5m, other lengths can be customized. 3, GFS-E Three-Axis Fluxgate s protection/sealing default is IP67; for deep submersible package (underwater 500 meters), please contact Coliy. Optional Accessories PS2015 Model FDU101 FDU108 Power Adapter Input: 100VDC- 240VDC; Output Voltage: ±15VDC, ±5% Output Rated Current: 0.8A Descriptions Fluxgate Data Acquisition Unit To digitize a 3-axis fluxgate sensor to obtain the digital signal of Magnetic field intensity. (More details see in Fluxgate Data Acquisition Unit To digitize up to 16 3-axis fluxgate sensors to obtain the digital signal of Magnetic field intensity. (More details see in 3-Axis Fluxgate 4 <<
5 Handheld Gaussmeter 3-Axis Fluxgate Compare With Competitors COLIY has an advantage COLIY GFS-E Bartington MAG690 Measurement noise floor 20pTrms/ Hz at 1Hz 20pTrms/ Hz at 1Hz Bandwidth(-3dB) >1.5KHz >1.5KHz Field Analog Signal/Axis (Output Voltage/Axis) ±10V or ±5V(Optional) ±10V Accuracy of Temperature ±0.5 C None Due to continuous process improvement, specifications subject to change without notice. Document trademarks and product names are trademarks of Coliy Technology GmbH. Amendment 1,Publishing:NSF-English >>5
GSP303D 3-Axis Digital Magnetic Field Transmitter
Digital Handheld Magnetic Transmitter Transmitter Field Transmitter GSP303D 3-Axis Digital Magnetic Field Transmitter Digital Output (RS485) Accuracy Based on Reading (Not Range) Wide Supply Power: 5 to
More informationInnovation in Magnetic Field Measuring Instruments. High Temperature Fluxgate Probes
Innovation in Magnetic Field Measuring Instruments High Temperature Fluxgate Probes High Temperature Fluxgate Probes Bartington High Temperature Three-Axis Fluxgate Probes Designed to survive high levels
More informationHigh Temperature Fluxgate Probes
INNOVATION IN MAGNETICS DS3629/3 High Temperature Fluxgate Probes www.bartington.com High Temperature Fluxgate Probes High Temperature Three-Axis Fluxgate Probes Designed to survive high levels of shock
More informationHandheld Gaussmeter Gaussmeter
Handheld Gaussmeter Gaussmeter G93 Handheld Wide-range 3-Axis Gaussmeter Magnetic field measurement from 10nT(0.1mG) to 30T(300KG), and the range spans 10 9. Description: With many years of magnetic field
More informationINNOVATION IN MAGNETICS DS3143/11. Mag-13. Three-Axis Magnetic Field Sensors.
INNOVATION IN MAGNETICS DS3143/11 Mag-13 Three-Axis Magnetic Field Sensors www.bartington.com Mag-13 Three-Axis Magnetic Field Sensors Mag-13 Three-Axis Magnetic Field Sensors The Mag-13 range of sensors
More informationGrad-13. Digital Three-Axis Gradiometer.
Grad-13 Digital Three-Axis Gradiometer www.bartington.com Grad-13 Digital Three-Axis Gradiometer Bartington Grad-13 Digital Three-Axis Gradiometer The Grad-13 provides high resolution vector measurements
More informationMagnetic Field Compensation System MR-3
Magnetic Field Compensation System MR-3 (DC 1kHz) (DC 10kHz) Description Magnetic Field Compensation System MR-3 can compensate the magnetic field which is measured in three axes. Therefore, it can reduce
More informationMagnetometry. Product Range. Innovation in Magnetic Measuring Instruments
Magnetometry Product Range Distributed By: GMW Associates 955 Industrial Road, San Carlos, CA, 94070 USA PHONE: +1 650-802-8292 FAX: +1 650-802-8298 EMAIL: sales@gmw.com WEB: www.gmw.com Innovation in
More informationAUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S02
AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH3DR family, a tri-phase tranducer is for the electronic measurement of DC, AC or pulsed s in high power automotive applications with galvanic isolation
More informationBARTINGTON INSTRUMENTS. How to use this Manual... 3 Symbols Glossary Introduction to the Mag Vector Measurements and Conventions...
Table of Contents How to use this Manual... 3 Symbols Glossary... 3 Introduction to the Mag648... 4 Vector Measurements and Conventions... 4 Installing the Mag648... 5 Siting the Magnetometer (Environment
More informationAUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S00
AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S00 Introduction The HAH3DR family, a tri-phase tranducer is for the electronic measurement of DC, AC or pulsed s in high power automotive applications with galvanic
More informationOperation Manual for. Mag690 Three-Axis Fluxgate Magnetometer.
Operation Manual for Mag690 Three-Axis Fluxgate Magnetometer www.bartingtondefenceandspace.com www.bartingtondefenceandspace.com Table of Contents 1. How to Use this Manual 3 1.1. Symbols Glossary 3 2.
More informationSDM3045X Digital Multimeter. DataSheet
SDM3045X Digital Multimeter DataSheet-2016.06 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for
More informationHS-MS-FG Selection Guide Xi an Huashun Measuring Equipment Co., Ltd.
HS-MS-FG Wide band, Low Noise,Fluxgate Sensor Selection Guide Xi an Huashun Measuring Equipment Co., Ltd. 1 General Description The Fluxgate Sensor is to measure the magnitude of magnetic field with non
More informationAUTOMOTIVE CURRENT TRANSDUCER HAH1DR 300-S
AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH1DR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic isolation between the primary
More informationExposure Level Tester ELT-400
Safety Evaluation within a Magnetic Field Environment Exposure Level Tester ELT-400 Direct Evaluation of Field Exposure Compared to Major Standards (IEEE C95.6) Automatic Exposure Evaluation for Various
More informationOperation Manual for. Mag690 Three-Axis Fluxgate Magnetometer
Operation Manual for Mag690 Three-Axis Fluxgate Magnetometer Table of Contents 1. About this Manual 4 1.1. Symbols Glossary 4 2. Safe Use 4 3. Introduction to the Mag690 4 3.1. Vector Measurements and
More informationCSG110 Strain Gauge Universal Amplifier
Quick Start Guide CSG110 Strain Gauge Universal Amplifier Sensor Solutions Source Load Torque Pressure Multi-Axis Calibration Instruments Software www.futek.com Getting Help TECHNICAL SUPPORT For more
More informationSDM3045X Digital Multimeter. DataSheet
SDM3045X Digital Multimeter DataSheet-2018.12 User-friendly Design Product Overview SDM3045X is a 4½ digit digital (60000 count) multimeter incorporating a dual-display and is especially well suited for
More informationAUTOMOTIVE CURRENT TRANSDUCER DHAB S/15
AUTOMOTIVE CURRENT TRANSDUCER Introduction The DHAB family is best suited for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications. Its contains galvanic isolation
More informationOperation Manual for. Mag585 and Mag592 Low Radiation Three-Axis Magnetic Field Sensors
Operation Manual for Mag585 and Mag592 Low Radiation Three-Axis Magnetic Field Sensors Table of Contents 1. How to use this manual 4 1.1. Symbols glossary 4 2. Safe use 4 3. Introduction to the Mag585
More informationAUTOMOTIVE CURRENT SENSOR DHAB S/18. Datasheet
AUTOMOTIVE CURRENT SENSOR DHAB S/18 Datasheet 070720/1 Page 1/6 Introduction The DHAB family is best suited for DC, AC or pulse current measurement in high power and low voltage automotive applications.
More informationAUTOMOTIVE CURRENT SENSOR DHAB S/25. Datasheet
AUTOMOTIVE CURRENT SENSOR DHAB S/25 Datasheet Page 1/6 Introduction The DHAB family is best suited for DC, AC or pulse current measurement in high power and low voltage automotive applications. It s contains
More informationLOW COST SDI 2210, 2260 & 2266 HIGH PERFORMANCE SDI 2220 & 2276
LOW COST & HIGH PERFORMANCE 1-AXIS DC ACCELEROMETER MODULES Low Noise: 10 μg Hz Typical for ±2g Full Scale Versions -55 to +125 C Operating Temperature Range Flexible +8 to +32 VDC Power Excellent Long
More informationICAM. Electronics & Software. Industrial Charge Amplifier for Applications in Manufacturing. Type 5073A...
Electronics & Software ICAM Type 5073A... Industrial Charge Amplifier for Applications in Manufacturing The ICAM charge amplifier (Industrial Charge Amplifier Manufacturing) converts the piezoelectric
More informationNI PXI-4461 Specifications
NI PXI-446 Specifications Analog Input Input Characteristics This document lists specifications for the NI PXI-446 Dynamic Signal Acquisition (DSA) device. These specifications are typical at 5 C unless
More informationSafety Evaluation Within a Magnetic Field Environment
EXPOSURE LEVEL TESTER ELT-400 Safety Evaluation Within a Magnetic Field Environment Direct evaluation of field exposure in comparison with major standards Automatic exposure evaluation for various waveforms
More informationMAGNETIC FIELD METER Operator s Manual
Edition 3.1 2009-09-03 MAGNETIC FIELD METER 2000 Operator s Manual The MFM 2000 is a professional magnetic field instrument To make the best use of the instrument we recommend that you read this manual
More informationKistler LabAmp for DynoWare
Electronics & Software Kistler LabAmp for DynoWare Charge Amplifier and Data Acquisition for Multicomponent Force Measurement This instrument is ideal for multicomponent force-torque measurement with piezoelectric
More informationthin and flexible probes factory calibration certificate with traceability High precision Analog output: DC 35 khz (depending on probe type)
Am Borsigturm 54 1357 Berlin AS-active-probes Calibrated probes for nt-, µt-, mt- and T- range thin and flexible probes factory calibration certificate with traceability High precision Analog output: DC
More informationUSB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6F600-S
AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and
More information3D-magnetic field probes AS-U3D GEO-X for ±200 µt
3D-magnetic field probes AS-U3D GEO-X for ±200 µt measurement of X, Y, Z or Σ DC and AC field measurement measurement range: ±200 µt (2 G) high bandwidth: DC 500 Hz linearity error:
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6F700-S
AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and
More informationFeatures. Picture. Specifications. Pressure Transmitter 4-20mA 2-wire MPG Type: MPGxxxxxxxx for level measurement Order No.: see Table 1 / Page 4
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Pressure measurement relative or absolute Output signal 4-20 ma, adjustable
More informationAUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS
AUTOMOTIVE CURRENT TRANSDUCER HCF-SN CLIPS Introduction The HCF CLIPS Family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with galvanic
More informationXPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
More informationOperation Manual for. Mag648 and Mag649 Low Power Three-Axis Magnetic Field Sensors
Operation Manual for Mag648 and Mag649 Low Power Three-Axis Magnetic Field Sensors Table of Contents 1. About this Manual 3 1.1. Symbols Glossary 3 2. Safe Use 3 3. Introduction to the Mag648 & Mag649
More informationMAGNETIC FIELD METER Operator s Manual
Edition 4.4 September 2011 MAGNETIC FIELD METER 3000 Operator s Manual The MFM 3000 is a professional magnetic field instrument To make the best use of the instrument we recommend that you read this manual
More informationBH series Paddle joystick controllers
Distinctive features and specifications Hall effect joystick and switch function Sculpted ergonomic rubber grip 5V operation - standard dual redundant outputs Analog or PWM outputs Custom lever colors
More informationReconfigurable 6 GHz Vector Signal Transceiver with I/Q Interface
SPECIFICATIONS PXIe-5645 Reconfigurable 6 GHz Vector Signal Transceiver with I/Q Interface Contents Definitions...2 Conditions... 3 Frequency...4 Frequency Settling Time... 4 Internal Frequency Reference...
More informationOperation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale.
Electronics & Software Type 5080A... Multichannel Laboratory This universal laboratory charge amplifier can be used for force and torque measurements with piezoelectric dynamometers or force plates. Piezoelectric
More informationNI 6013/6014 Family Specifications
NI 6013/6014 Family Specifications This document lists the I/O terminal summary and specifications for the NI 6013/6014 family of devices. This family includes the following devices: NI PCI-6013 NI PCI-6014
More informationAUTOMOTIVE CURRENT SENSOR HC6H500-S. Datasheet
AUTOMOTIVE CURRENT SENSOR HC6H500-S Datasheet Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low
More informationAUTOMOTIVE CURRENT SENSOR HC6H300-S
AUTOMOTIVE CURRENT SENSOR HC6H300-S Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive
More informationSafety Evaluation Within a Magnetic Field Environment
EXPOSURE LEVEL TESTER ELT-400 Safety Evaluation Within a Magnetic Field Environment Direct evaluation of field exposure in comparison with major standards and regulations such as Directive 2013/35/EU for
More informationSSI Inclinometer. Zigbee. CDMA Vibration-wire. SSI PWM Switch Analog. Features. Descriptions
SSI Inclinometer Features - Isolated SSI synchronous serial output - Compatible RS422 - Max transfer distance 400 m - IP67 protection - EMI/ESD protection - Patent tilt measuring technical, real high accuracy
More informationH3A Magnetic Field Transducer
DESCRIPTION: The H3A denotes a range of Low Noise SENIS Magnetic Field-to-Voltage Transducers with hybrid 3- axis Hall Probe. The Hybrid Hall Probe integrates three highresolution with good angular accuracy
More informationTel: (949) Fax: (949) IAA100 Product Manual
IAA100 Product Manual Table of Contents Default Settings... 3 Connections... 3 Standard Span & Zero Adjustment... 4 Shunt Readings... 5 Digitally Controlled Remote Shunt... 5 Switch Configurations... 6
More informationRS Pro DIGITAL MULTI-METER SDM3055 SERIES
ENGLISH Product Datasheet Stock No: 1236465 1236466 RS Pro DIGITAL MULTI-METER SDM3055 SERIES Product Overview RSDM3055 is a digital multimeter designed with 5 ½ digits readings resolution and dual-display,
More informationPNI SEN-S Magneto-Inductive Sensor
1000619 R04 - March 2004 PNI SEN-S Magneto-Inductive Sensor General Description PNI Corporation s Magneto-Inductive (MI) sensors are based on patented technology that delivers breakthrough, cost-effective
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DR 200-S
AUTOMOTIE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAHDR 2-S Introduction The HAHDR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic
More informationBL series Miniature paddle joystick controllers
Distinctive features and specifications Hall effect joystick and switch function Sculpted ergonomic rubber grip 5V operation - standard dual redundant outputs Analog or PWM outputs Custom lever colors
More informationDifferential charge amplifier
Electronics Differential charge amplifier Type 5181A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure
More informationDM1200ID. Specification highlights Symbol Unit Min Typ Max. Applications: Features. Power measurement and power analysis
Ultra-stable, high precision (ppm class) fluxgate technology DM Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1500A Features Ø45mm aperture enabling large isolated
More informationPNI SEN-L Magneto-Inductive Sensor
PNI SEN-L Magneto-Inductive Sensor General Description PNI Corporation s Magneto-Inductive (MI) sensors are based on patented technology that delivers breakthrough, cost-effective magnetic field sensing
More informationPicture 1 PC & USB Connection
USB Ethernet HART Profi-bus DeviceNet EtherCAT CANopen CAN RS Zigbee Analog Switch Vibration-wire PWM SSI CDMA GPRS Wi-Fi USB Inclinometer Features - Reference with USB2.0 protocol - P2P and compatible
More informationNI DAQPad -6020E Family Specifications
NI DAQPad -6020E Family Specifications This document lists the I/O terminal summary and specifications for the NI DAQPad-6020E family of devices. This family includes the following devices: NI DAQPad-6020E
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S
AUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S 18198151434 Page 1/ 5 HC6H1000-S Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in
More informationDEVICE SPECIFICATIONS Phase Matrix PXI GHz PXI Vector Signal Analyzer
DEVICE SPECIFICATIONS Phase Matrix PXI-470 26.5 GHz PXI Vector Signal Analyzer This document lists specifications for the Phase Matrix PXI-470 26.5 GHz vector signal analyzer (VSA). The PXI-470 26.5 GHz
More informationDifferential Charge Amplifier
Electronics Differential Type 58A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure (IP64) Plastic
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationDQ600ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: Linearity error maximum 1 ppm. MPS for particles accelerators
Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 1000A Features Linearity error maximum 1 ppm Fluxgate,
More informationHandheld Spectrum Analyzer R&S FSH3
Handheld Spectrum Analyzer R&S FSH3 100 khz to 3 GHz Third Edition March 2003i Spectrum analysis anywhere, anytime The R&S FSH3 is the ideal spectrum analyzer for rapid, high-precision, cost-effective
More information1 of 6 03/12/2012 14:56 2012-12-03 HAMEG > Products > Accessories > Probes http://www.hameg.com/186.0.html P R O B E S H Z 5 6-2 * AC/ DC Current Clamps This AC/DC Current Probe is used to measure currents
More informationD7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
More informationData Sheet THE SCA121T DUAL AXIS INCLINOMETER MODULES. Features. Applications
Data Sheet THE SCA121T DUAL AXIS INCLINOMETER MODULES The SCA121T Series contain 3D-MEMS-based dual axis inclinometer modules that provide instrumentation grade performance for leveling applications in
More informationFeatures. Picture. Specifications
Type: for level measurement Order No.: see Table 1 / Page 5 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma, adjustable within 1 : 4 of the nominal pressure Conformity
More informationUser manual for LEMI-029 digital fluxgate sensor system with KMS820 USER MANUAL. for LEMI 029 DIGITAL FLUXGATE SENSOR SYSTEM
USER MANUAL ORIGINATED BY: REVISION DATE: DOCUMENT NUMBER: J. Jiang Nov 29 th, 2012 13-0008-800 SUBJECT: User manual for LEMI-029 digital fluxgate sensor system with KMS820 REVISION: 2.0 USER MANUAL for
More informationModel D875 Mini Tuff Tilt Digital Tiltmeter
The model 875 Mini Tuff Tilt Tiltmeter combines high precision and durability in a miniaturized and economical instrument package. Using MEMS technology, the 875 delivers superior measurement accuracy
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 800-S03/SP2
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH3DR-S03 family is a tri-phase transducer for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications.
More informationSDM3055 Digital Multimeter. DataSheet
SDM3055 Digital Multimeter DataSheet-2017.06 SDM3055 Product Overview The SDM3055 is a digital multimeter designed with 5 ½ digits readings resolution and dual-display, especially fitting to the needs
More informationAdditel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/157
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/157 Introduction The DHAB family is best suited for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications.
More informationDS400ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: Linearity error maximum 1.5 ppm. MPS for particles accelerators
Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 600A Features Linearity error maximum 1.5 ppm Fluxgate,
More informationFrequency range 100 khz to 3 GHz 100 khz to 6 GHz 10 MHz to 18 GHz Reference frequency. 2 ppm in addition 2 ppm/10 C. 0 Hz, 100 Hz to 3 GHz
Specifications Specifications apply under the following conditions: 15 minutes warm-up time at ambient temperature, specified environmental conditions met, and calibration cycle adhered to. Data without
More informationMagnetic-Field Test System / Low-Frequency Test System for Emission and Immunity Tests / MTS-800
IN ONE UNIT: 800W precision power amplifier, Spectrum Analyzer, Signal Generator General: The MTS-800 is a compact test system for broadband generation and measurement of magnetic fields. Its internal
More informationQuickSyn Frequency Synthesizers
QuickSyn Frequency Synthesizers FSL mmw Series This series offers models FSL-2740, FSL-5067, and FSL-7682, which extend QuickSyn Lite synthesizers into the millimeterwave range. The three available models
More informationGPRS Inclinometer. Zigbee. CDMA Vibration-wire. SSI PWM Switch Analog. Features. Descriptions
GPRS Inclinometer Features - Industry GPRS interface - Quad-Band 850/ 900/ 1800/ 1900 MHz Transmission - worldwide - Support PBCCH, CSD up to 14.4 kbps - Support single/multi-center modes - Support domain
More informationSCC-FV01 Frequency Input Module
USER GUIDE SCC-FV01 Frequency Input Module Conventions The SCC-FV01 frequency input module is a frequency-to-voltage converter designed to measure signals from frequency-generating sensors and other periodic
More informationCharge Meter. Electronics & Software. Universally Applicable for Piezoelectric Measuring Technology. Type 5015A...
Electronics & Software Charge Meter Type 5015A... Universally Applicable for Piezoelectric Measuring Technology This instrument can be used wherever mechanical quantities are measured with piezoelectric
More informationPNI SEN-L. Leaded Magneto-Inductive Sensor. Features. General Description. Applications. Ordering Information
Updated August, 2006 PNI SEN-L Leaded Magneto-Inductive Sensor General Description PNI Corporation s Magneto-Inductive (MI) sensors are based on patented technology that delivers breakthrough, cost-effective
More informationHandheld Spectrum Analyzer R&S FSH3
Handheld Spectrum Analyzer R&S FSH3 100 khz to 3 GHz Fourth Edition July 2003i Spectrum analysis anywhere, anytime The R&S FSH3 is the ideal spectrum analyzer for rapid, high-precision, cost-effective
More informationDL2000ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: 1 ppm linearity. MPS for particles accelerators.
DL000ID Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A Features ppm linearity 6 ppm offset
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More informationPicture. Digital output signal (pressure and temperature) RS-485 Modbus RTU, 9600 bps Protocol details see Data Sheet SW
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Four wire system Piezoresistive measuring element Pressure measurement relative or absolute Output signal 4-20 ma and RS-485
More informationSCC-ACC01 Accelerometer Input Module
USER GUIDE SCC-ACC01 Accelerometer Input Module Conventions The SCC-ACC01 accelerometer (ACC) input module accepts an active accelerometer input signal, passes it through a 0.8 Hz highpass filter, amplifies
More informationAnalog Signal Conditioning Accessories
NI 64-channel multiplexer mv, V, current, and thermocouple inputs NI 8-channel simultaneous sample-and-hold mv, V inputs NI SC-2042-RTD 8-channel RTD/thermistor RTD, thermistor, mv, V inputs NI 8-channel
More informationVert-X 28HD - 24V / V. Applications Harvester Public transport Construction machines
Sensor principle MH-C MH-C2 Electrical data Measuring range 0...360 - Indep. linearity % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz
More informationNI 6143 Specifications
NI 6143 Specifications This document lists the I/O terminal summary and specifications for the NI PCI/PXI-6143. For the most current edition of this document, refer to ni.com/manuals. Refer to the DAQ
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DRW 300-S
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH1DRW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with
More informationMiniature pressure sensor
SPECIFICATIONS Ranges 0.5 to 350 bar [7 psi to 5 000 psi] Absolute, sealed and gauge Titanium construction For static and dynamic applications Linearity up to ±0.25% FS The XP5 serie is designed in titanium
More informationIsolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationADAM Isolated DC Input/Output Signal Conditioning Module. User s Manual
ADAM-3014 Isolated DC Input/Output Signal Conditioning Module User s Manual ADAM and the ADAM logo are trademarks of Advantech Part no. 2000014000 Edition 1.1 Printed in Taiwan November 2006 Introduction
More informationPXI MICROWAVE LOCAL OSCILLATOR MODULE
The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn
More informationNI 6731/6733 Specifications
NI 6731/6733 Specifications This document lists the specifications for the NI 6731/6733 analog output devices. The following specifications are typical at 25 C unless otherwise noted. Note With NI-DAQmx,
More informationIsolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
More informationDSA800. No.1 RIGOL TECHNOLOGIES, INC.
No.1 DSA800 9 khz to 1.5 GHz Frequency Range Typical -135 dbm Displayed Average Noise Level (DANL) -80 dbc/hz @10 khz offset Phase Noise Total Amplitude Uncertainty
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/124
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/124 Picture of product with pencil Introduction The DHAB family is best suited for DC, AC, or pulsed currents measurement in high power and low
More information