MYS WWSP PLUS III POWER UNIT

Size: px

Start display at page:

Download "MYS WWSP PLUS III POWER UNIT"

Rudolph Ball
5 years ago
Views:

MYS WWSP PLUS III POWER UNIT Isolation Transformer Shore Power Converter UPS All in one compact unit, 50Hz three phase in the Port available automatic

The unit detects 60Hz or only one phase automatically the converter steps in and produce the correct 50Hz and three phase 400V for the main panel.

1 MYS WWSP PLUS III POWER UNIT Isolation Transformer Shore Power Converter UPS All in one compact unit, 50Hz three phase in the Port available automatic detection, automatic phase rotation applied and only Isolation Transformer pass the energy to main panel. The unit detects 60Hz or only one phase automatically the converter steps in and produce the correct 50Hz and three phase 400V for the main panel. Shore Power lost, or no Generator Power available, automatic UPS 0 seconds kicks in to avoid black ship, useable time depends of UPS battery bank, and the switch off from non preferential consumers, output for this function available.

POWER UNIT SHORE POWER CONVERTER with UPS Option MYS WWSP series Power phase converter, adopted AC-DC-AC circuit structure and SVPWM modulation control technology, which can convert ordinary

2 POWER UNIT SHORE POWER CONVERTER with UPS Option MYS WWSP series Power phase converter, adopted AC-DC-AC circuit structure and SVPWM modulation control technology, which can convert ordinary single-phase shore power to Yacht threephase power. One, two phase to three phase,3 phase to 3 phase and so on. MYS WWSP output is standard pure sine wave, the harmonic distortion rate (THD) is less than 2%, totally and we meet the international standards power quality, applicable to all types of load. MYS WWSP series shore power converter, the phase angle is 120 degrees MYS WWSP series shore power converter will solve electric shore power compatibility in world areas because of the inconvenience the supply not match frequency 60Hz or voltage 120/208/440 V AC, but also solve the limitation of shore to only supply one or two phases.

TECHNICAL DESCRIPTION We use last generation high efficient IPM intelligent module from Mitsubishi, very efficiency and stable performance.

3 TECHNICAL DESCRIPTION We use last generation high efficient IPM intelligent module from Mitsubishi, very efficiency and stable performance. IPM has powerful protection function, protection for short circuit, over load and over temperature. Pure sine wave output with good transient response less than 50ms, waveform distortion is very small, we have higher conversion efficiency and stable output voltage. For complete ship isolation to shore we adopted to integrate low frequency transformer which ensure the input voltage and output voltage are completely electrical isolated to avoid corrosion effects on board. We use the SVPWM space vector algorithm, this guaranty high conversion efficiency, high instantaneous power and low no-load loss conversion, our can we reach more than 94% efficiency rating, to no burn energy to heat. Also the Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices. The output is perfectly protected, with over-voltage, overload, short circuit, over temperature and we have a self-diagnosis. we use IPM Containing a built-in dedicated drive circuit to extract more performance from the IGBT chip, IPM (Intelligent Power Module) is a high-function module with a dedicated IC for self-protection functions (for over-current, undervoltage of control power supply and over-heating). We have continued to develop a variety of new IPM series in line with the evolution of the IGBT chip. The "L Series" delivers loss reduction, thanks to the built-in CSTBT, and miniaturized packaging, while the "L1 Series" and "V1 Series" boast improved characteristics. The lineup also includes the "S1 Series", which is the successor to the "S-DASH SERVO Series".

4 MYS WWSP PLUS III 200 kw POWER UNIT Model WWSP-200KW AC Input AC Output Protection Isolation mode Low Frequency Transformer Input rated voltage (Vac) three phase 440V Input rated voltage range 110/120/220/230/240V/380V/415V/440V/480Vac optional Input rated current A 481A Rated output power 200KW Output waveform Phases Pure sine wave Three phase, 4 wire Output rated voltage 400VAC ±3% Output voltage range Output rated current Output Frequency 380/400/415/440/480Vac optional 251A (phase current) 50Hz±0.05Hz Power Factor PF 1 Overload Ability 150%, 10s Efficiency >94% Waveform distortion rate <3% Linear load (THD) Dynamic Response (0 to 5% 50ms 100% load) Display Running mode Electrical insulation properties Protection Cooling method Short-circuit protection LCD Working continuously 2000Vac, 1 Minute Input under voltage, over voltage, output over-current, short circuit, overheating etc. Fan-cooled Ambient temperature -15~+55 Using humidity No automatic recovery, need to restart necessary environment 0~90% No condensation Noise ( 1 meter) Degree of protection Dimension (mm) weight 50dB IP20 indoor 1200x1200x18600mm 1250kg

5 PRICE EXW 2017/ ,00 Certification and Type approval by

ASEP Industrial Electronics Co., Ltd

ASEP Industrial Electronics Co., Ltd Tel:+86-757-63379717 Fax:+86 138-2849-4442 E-Mail: timsyblecheung@gmail.com No.1-2, Dongqu 6 Road, Luocun Lianhe Industrial Area, Foshan,GuangDong China WebSite:www.asepups.com Solar On grid Inverter Series