B9000 FXS kVA B9600 FXS kVA

Size: px

Start display at page:

Download "B9000 FXS kVA B9600 FXS kVA"

Ursula Ball
6 years ago
Views:

1 OF CONTINUOUS SERVICE YEARS WARRANTY B9000 FXS kVA B9600 FXS kVA

BORRI B9000 FXS B9600 FXS With disturbances to the electrical supply being one of the major causes of IT downtime, the UPS system is regarded as the most critical infrastructure device in the data

2 BORRI B9000 FXS B9600 FXS With disturbances to the electrical supply being one of the major causes of IT downtime, the UPS system is regarded as the most critical infrastructure device in the data centre. Interruptions to electrical supply can cost organisations in excess of 100,000 per hour in lost revenues and productivity. The innovative design of the Borri B9000FXS and B9600FXS range makes it one of the most technologically advanced UPS of its kind. Exclusively developed by Borri, the FXS series delivers an advanced combination of low input current distortion, unity power factor input, high overall efficiency and maximum load protection ensuring ultimate power quality. This sophisticated arrangement of features make this series ideal for critical applications where reliability and high performance are fundamental. In addition, the FXS range comprises an IGBT input rectifier design with dual DSP (Digital Signal Processing) and µc (Micro Controller) technologies, which provides full digital control. The FXS configuration guarantees high quality output required by loads requiring a stable and clean source of power, whilst ensuring that auxiliary power supplies and processors are no longer single points of failure as with some other UPS Systems. VFI (Voltage & Frequency Independent) Online Double Conversion topology, provides built-in inverter galvanic protection, completely isolating the output of the UPS from mains power problems and further protection is achieved via an integral output isolation transformer. This advanced design offers an extensive range of user benefits, delivering high efficiency without compromising load protection. > 3 Year Warranty > High Efficiency > Transformer Protection B9000FXS KVA 3 Year Warranty A 3 year warranty is standard on all Borri B9000FXS and B9600FXS UPS Systems. YEARS WARRANTY We are able to offer such an impressive warranty due to the superior reliability and confidence in our product. To the best of our knowledge no other UPS manufacturer can boast such a lengthy warranty. Not only does this give the user peace of mind but also has the added benefit of reducing on-going maintenance costs. 2

Online Double Conversion Ultimate protection for all loads from data centres to industrial applications,

and so are isolated from any input power disturbances, spikes, dips or outages.

or switching should the need arise for them to power the load.

to control perfect output conditions without having to use battery power.

3 Online Double Conversion Ultimate protection for all loads from data centres to industrial applications, the B9000/B9600FXS incorporates Online Double Conversion or VFI (Voltage and Frequency Independent) topology. In Online Double Conversion mode the output voltage and frequency are constantly generated by the inverter and so are isolated from any input power disturbances, spikes, dips or outages. For maximum protection, the batteries are positioned in the conversion circuit to ensure there is no break or switching should the need arise for them to power the load. This technology allows for an extremely wide range of input voltage and frequency, whilst enabling the UPS to control perfect output conditions without having to use battery power. As the AC input is always converted to DC and then converted back to AC, the double conversion process provides complete electrical isolation of the output from the input, in fact unless the inverter is switched off the critical load will never see the raw mains power UPS Block Diagram w w w. b o r r i. c o. u k 3

Enhanced Compatibility with Mains & Generators The B9000FXS/B9600FXS use an IGBT input rectifier design, encompassing an advanced PFC (Power Factor Correction), which can keep input current THDi

Main benefits for the user: > The installation of the UPS is simplified > Upstream electrical supplies and cables do not have to be heavily overrated to cope with high harmonic distortion B9600FXS

typically 20% > Reduced charges from your energy supplier > THDi <3% with Input power factor >0.

4 Enhanced Compatibility with Mains & Generators The B9000FXS/B9600FXS use an IGBT input rectifier design, encompassing an advanced PFC (Power Factor Correction), which can keep input current THDi (Total Harmonic Distortion of the input) at a level of less than 3% and an input power factor within 1% of unity, even when only small loads are applied. Main benefits for the user: > The installation of the UPS is simplified > Upstream electrical supplies and cables do not have to be heavily overrated to cope with high harmonic distortion B9600FXS kVA > Standby generators can typically be downsized by 40% > Users can extract more output power from their current supply, increasing load capacity > Efficiency is massively increased - typically 20% > Reduced charges from your energy supplier > THDi <3% with Input power factor >0.99 High Efficiency Dedicated to traditional UPS design, we know that conventional UPS systems operating in true online double conversion mode (VFI) with an output transformer provide the very highest level of protection. Historically this has resulted in poor operating efficiency, however, investment at component level in the design of B9000FXS/B9600 FXS means that the complete range, which has been independently certified by TüV NORD, can perform with overall efficiency levels of greater than 95% through mid-range loadings, in online double conversion mode. This impressive operational rating provides the user with true efficiency without compromise. > Independently certified overall efficiency in excess of 95% at half load running in full online double conversion mode. > Smart online mode efficiency of <98% 4

Transformer Based In keeping with tradition and time proven reliability, the B9000FXS and B9600FXS include an

The benefit of eliminating the possibility of high DC voltage destroying a valuable data centre in the case of

The transformer increases the overload capabilities, step load performance and short circuit clearing

integration of the transformer with the output AC filter capacitors forms a low-pass filter.

Functionality Internal Galvanic Isolation Transformer Front access > Galvanic Isolation between DC and AC.

5 Transformer Based In keeping with tradition and time proven reliability, the B9000FXS and B9600FXS include an output isolation transformer as standard. The benefit of eliminating the possibility of high DC voltage destroying a valuable data centre in the case of a failing semiconductor, certainly outweighs the small additional footprint required. The transformer increases the overload capabilities, step load performance and short circuit clearing capability and with the addition of a bypass isolation transformer (which produces no losses in normal mode) floating neutrals can be eliminated. High frequency ripple and harmonic distortion of the inverter waveform can also be eliminated with the integration of the transformer with the output AC filter capacitors forms a low-pass filter. B9000FXS / B9600FXS Main Features TüV Certified High Efficiency Online Double Conversion Smart Online Functionality Internal Galvanic Isolation Transformer Front access > Galvanic Isolation between DC and AC. > Additional protection against spikes and surges > Increased performance for step loadings > Reduced harmonics B9000FXS/9600FXS efficiency in excess of 95% at half load Measured Efficiency B9600 FXS 500kVA Efficiency Graph B9600FXS 500kVA 0% 25% 50% 75% 100% % Load B9000FXS kVA w w w. b o r r i. c o. u k 5

Air flow for the B9000FXS/B9600FXS is drawn from the base of the UPS and is exhausted out of the top, this design allows for the UPS to be installed against side or rear walls greatly reducing space.

scalable power output of 6.4MVA. The FXS series incorporates a fully digital, parallel control circuitry and acts on both active and reactive power on each phase of the UPS outputs.

6 Air flow for the B9000FXS/B9600FXS is drawn from the base of the UPS and is exhausted out of the top, this design allows for the UPS to be installed against side or rear walls greatly reducing space. Parallel Offering parallel options for redundancy or capacity modes, the B9600FXS and B9600FXS can add future resilience or scalable growth Up to 8 units can be connected in parallel giving a total scalable power output of 6.4MVA. The FXS series incorporates a fully digital, parallel control circuitry and acts on both active and reactive power on each phase of the UPS outputs. This allows accurate load current sharing among the UPS units even during transient conditions. Parallel control is distributed between all units and communication is achieved through the use of a CAN BUS connection loop. This eliminates any single point of failure within the system and increases reliability. Ultra High Efficiency - Smart Online (SOL) While we advocate that ultimate protection is only achieved whilst operating in online double conversion mode, we also understand that in some situations users will require ultimate efficiency. With this in mind, the FXS series now features smart online mode (SOL). This mode significantly reduces energy consumption as the load is fed primarily through the bypass line. The SOL function continually monitors the input characteristics of the supply and the UPS switches to Inverter within 2mS should the control system experience any anomalies. This mode is perfect for achieving a reduced data centre PUE. Intelligent design of the system connections allow for easy installation and future additions without the need for a power down. In the modular arrangement, units can be added or removed whilst the system is supporting a load. The smart parallel function enables individual units to shut down based on the load applied, delivering optimum efficiency whilst maintaining redundancy. Two independent parallel systems can be synchronised to feed downstream STS for seamless transfers. > 8 units in parallel configuration (up to 6.4MVA) > Output synchronisation of separate parallel systems > Smart parallel with load based shutdown Bypass Easy Installation, Operation and Maintenance The B9000FXS and B9600FXS are designed with only front and roof access for installation and maintenance. This means the units can be installed close to walls and adjacent equipment providing a significant reduction in floor space. As all critical components are accessible from the front of the unit, regular maintenance can be completed with ease. Mains Parallel...n For increased flexibility, the B9600FXS is delivered in modules and assembled upon installation. A maximum width of 1200mm per module ensures a simplified delivery. Load 6

7 BORRI B9000 FXS Technical Specification POWER - KVA 60kVA 80kVA 100 kva 125kVA 160kVA 200kVA 250kVA 300kVA Capacity (kva) Dimensions WxDxH (mm) 815x825x x860x1900 Weight (kg) Input/output connection Battery INPUT Nominal voltage Voltage range Frequency Hardwired (dual input) External, 300 cells 220/380, 230/400, 240/415 VAC Three Phase -20%, +15% from nominal 50/60 Hz (45 65 Hz) Power factor 0.99 Current distortion (THDi) <3% OUTPUT Nominal voltage Frequency Voltage regulation PF acceptable without de-rating Overload capacity Efficiency - Online Double Conversion 220/380, 230/400, 240/415 VAC Three Phase 50/60 Hz ±1% static; ± 5% dynamic 100% load change, <20 ms recovery time Lagging to 0.9 leading % for 10 min (on-line); % for 1 min (on-line); 1000% for 1 cycle (bypass) >95% (Certified TUV Nord) Eco-mode - Smart Online 96-98% OPTIONS USER INTERFACE Front panel Standard communication ports Optional ENVIRONMENTAL Operating temperature Storage temperature Altitude Parallel capacity/redundancy; External bypass; Battery thermal probe; Top cable entry Graphical LCD display, mimic with LED s and keyboard RS232 serial port, USB port, Remote Emergency Power Off input, battery switch monitoring port Web/SNMP, ModBus, relay, modem cards; remote panel; monitoring and shutdown software 0 C +40 C -10 C +70 C <1000 m Audible noise at 1 meter (dba) <60 STANDARDS & CERTIFICATION Marking CE, GOST, ETL, TUV Safety IEC EN EMC IEC EN Test and Performance IEC EN Quality; Environment ISO9001: 2008, ISO14001: 2007 Health & Safety BS OHSAS, 18001: 2007 B9000FXS kVA B9000FXS kVA w w w. b o r r i. c o. u k 7

8 BORRI B9600 FXS Technical Specification POWER - KVA 400kVA 500kVA 600kVA 800kVA Capacity (kva) Dimensions WxDxH (mm) 1990x990x x990x x 990 x 1920 Weight (kg) Input/output connection Hardwired (dual input) Battery External, 300 cells INPUT Nominal voltage 220/380, 230/400, 240/415 VAC Three Phase Voltage range -20%, +15% from nominal Frequency 50/60 Hz (45 65 Hz) Power factor 0.99 Current distortion (THDi) <3% OUTPUT Nominal voltage 220/380, 230/400, 240/415 VAC Three Phase Frequency 50/60 Hz Voltage regulation ±1% static; ± 5% dynamic 100% load change, <20 ms recovery time PF acceptable without de-rating Lagging to 0.9 leading Overload capacity % for 10 min (on-line); % for 1 min (on-line); 1000% for 1 cycle (bypass) Efficiency - Online Double Conversion >95% (Certified TUV Nord) Eco-mode - Smart Online 96-98% OPTIONS Parallel capacity/redundancy; External bypass; Battery thermal probe; Top cable entry USER INTERFACE Front panel Graphical LCD display, mimic with LED s and keyboard Standard communication ports RS232 serial port, USB port, Remote Emergency Power Off input, battery switch monitoring port Optional Web/SNMP, ModBus, relay, modem cards; remote panel; monitoring and shutdown software ENVIRONMENTAL Operating temperature 0 C +40 C Storage temperature -10 C +70 C Altitude <1000 m Audible noise at 1 meter (dba) <60 STANDARDS & CERTIFICATION Marking CE, GOST, ETL, TUV Safety IEC EN EMC IEC EN Test and Performance IEC EN Quality; Environment ISO9001: 2008, ISO14001: 2007 Health & Safety BS OHSAS, 18001: 2007 The data and text contained within this brochure are for general information only and can not be deemed as definitive, specifications can change without notice. B9600FXS 400kVA B9600FXS kVA B9600FXS 800kVA BORRI LTD Systems House Rotherside Road Eckington Sheffield S21 4HL Tel: +44 (0) Fax: +44 (0) sales@borri.co.uk Web: BORRI S.p.A Via 8 Marzo, Bibbiena (Arezzo) Italy Tel: Fax: info@borri.it Web:

TECHNICAL DATA SHEET B9600FXS kva

GENERAL INFORMATION TECHNICAL DATA SHEET B9600FXS 400-500-600-800 kva UPS Type ON LINE - Double Conversion Nominal output power (Cos 0.9) kva 400 500 600 800 Nominal output power (Cos 1.0) kw 360 450 540