Solar Charge Controller Inverter

Size: px

Start display at page:

Download "Solar Charge Controller Inverter"

Hortense McCoy
6 years ago
Views:

Solar Charge Controller Inverter Picture Introduction Our solar charge controller inverter is designed according to the characteristics and requirements of green new energy system.

And to charge batteries via charging circuit, meanwhile the batteries supply power for DC loads and inverter via control part, finally the AC power will be supplied to AC loads via inverter,with the

4 Solar Charge Controller Inverter Picture Introduction Our solar charge controller inverter is designed according to the characteristics and requirements of green new energy system. It is suitable for the requirements of high quality and stability of solar energy PV power system. The system using solar cells convert solar energy into electrical energy. And to charge batteries via charging circuit, meanwhile the batteries supply power for DC loads and inverter via control part, finally the AC power will be supplied to AC loads via inverter,with the high utilization efficiency of solar power. Performance characteristic 1.LCD display function, very convenient to check and set various running parameters 2.Inverter control integration design, simple construction and easy maintenance 3.Power frequency toroidal transformer design, high inverting efficiency and low no-lad loss 4.Pure sine wave output, with the better effect and higher capacity of driving load when comparing square wave and modified sine wave 5.With the complete protection function for over charge, reverse charge and connection, open circuit and lightning

5 Solar inverter with built-in MPPT solar charge controller Item ISolar-LSM ISolar-LSM ISolar-LSM ISolar-LSM Capacity 1000VA 1500VA 2000VA 3000VA Power 800W 1200W 1600W 2400W Battery voltage 48 Work mode PV(PV priority) / AC (AC priority) Optional Input voltage range 48Vdc--90Vdc Max charging current 10A/20A/30A/40A/60A(Optional) PV side Max efficiency 98 % Display Indicator light LCD + LED Input voltage range 165Vac- 275Vac / 150Vac-275Vac Input frequency range Hz Output voltage Mains range 220Vac± 10% supply(optional) Input Power factor(ac/dc) 0.98 Max efficiency Mains supply mode 96% AC overload short circuit 110% 60s, 120% 30s Input to protective tube Output voltage 220Vac± 5% AC output Output frequency Output Power factor THD PV-AC switching time 50Hz/60Hz±1% 0.8 5%(linear load) 5Ms Max efficiency 84.5% Over load short circuit 110% 60s power off, 120% 5s power off Power off automatically

6 Alarm Communication interface(optional ) Others Mains supply abnormity 1 beep /4S,stop after 40S Battery low voltage 1 beep / 0.2S Over load 1 beep / 1S RS232 / USB / SNMP Output socket multifunction socket 3PCS / customized Surge protection Optional EMC EN :2006;EA :2006; EA :2008 IP level IP20 Temperature 0 ~ 40 10%~ 90%, Non-condensation Noise 50dB

7 Solar inverter with built-in PWM solar charge controller Model Battery rated voltage()v) Battery rated current(v) power of solar cells(kw) capacity(kva) Output rated voltage and frequency Waveform distortion rate(thd)(linear load) ISolar-LSP ISolar-LSP ISolar-LSP ISolar-LSP ISolar-LSP K K K 24 1K 48 1K ISolar-LSP ISolar-LSP 48 2K 96 2K ±3%VAC,50±0.05Hz 4% The dynamic response(load 0 100%) 5%,20ms Power factor 0.8 Overload capacity (150%) 10s Inverting efficiency 90% Output current crest factor 3:1 PV array connection reverse protection, battery over charge protection, battery over discharge Protection type Insulation strength (Input and output )VAC Noise(1m) Using environment temperature Mechanical size Depth*width*width (m) protection, battery connection reverse protection, output over load protection, output short circuit protection, over heating protection 1500VAC, 1 min 50dB -20 ~+50 0~90%, no condensation 250*183*181(standard ) 303*204*225(standard )

8 Pure Sine Wave Off-Grid Solar Inverter (Low Frequency) Picture

The description of solar inverter The function of solar inverter is converting DC to AC to supply power for AC loads, it is the nuclear part of the whole solar power system.

9 The description of solar inverter The function of solar inverter is converting DC to AC to supply power for AC loads, it is the nuclear part of the whole solar power system. In order to improve the whole performance of the photovoltaic generation system and ensure the power station s long stable running, the inverter provided is requested high stability Performance characteristics 1.Adopt fifth generation high efficient IPM modules from Mitsubishi 2.Adopt high efficient DSP as CPU from TI company 3.Pure sine wave output 4.The dynamic response of the system output and the quality of power output is improved since optimization of PID control algorithm used. THD 4% 5.LCD display multilevel menu, displayed content is : real-time parameters, state amount, very easy to operate press-key 6.Communication terminal : RS-232/485, support MODBUS protocol. 7.It can record all the tested data and fault state, 8.Querying history record available

10 Single phase pure sine wave solar inverter 12v/24v/48v series 1. Application field Household, vehicle emergency power supply Household wind power and photovoltaic generation system Wind power and photovoltaic power generation station The unattended monitoring equipment, etc fields, such as mobile communication station, highway etc areas Coastal islands, remote mountainous areas, border posts and other areas of power supply Government demonstration project, landscape lighting project, lighting project etc. 2. Performance characteristics Adopt fifth generation high efficient IPM modules from Mitsubishi Adopt high efficient DSP as CPU from TI company Pure sine wave output The dynamic response of the system output and the quality of power output is improved since optimization of PID control algorithm used. THD 4% LCD display multilevel menu, displayed content is : real-time parameters, state amount, very easy to operate press-key Communication terminal : RS-232/485, support MODBUS protocol. It can record all the tested data and fault state, Querying history record available CE certificate

11 Technical parameter 12V series single phase pure sine wave solar inverter Model ISOLAR12 0.2K ISOLAR12 0.3K ISOLAR12 0.4K ISOLAR12 0.5K ISOLAR12 0.6K voltage(vdc) 12 DC input DC voltage range(vdc) 10~ BYPASS input BYPASS input voltage(vac) BYPASS input BYPASS switching time (optional ) 220±15% (ms) capacity(kva) power(kw) AC output voltage and frequency 220±3%VAC,50±0.05Hz THD 4% (linear load ) Dynamic response 5%, 20ms(Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor Protection 3:1 over/low input voltage,input anti- connecting,over load output short circuit Working environment Temperature -20 ~+50 0~90%,Non-condensation Altitude(m) 4000 ( when altitude higher than 1000m, please use less loads ) Dimensions (Depth*width*height mm) 250*192*185mm

12 24V series single phase pure sine wave solar inverter Item ISOLAR24 0.2K ISOLAR24 0.5K ISOLAR24 1K ISOLAR24 1.5K ISOLAR24 2K voltage(vdc) 24 DC Input DC voltage range(vdc) 21~ AC output voltage(vac) switching time (optional) capacity(kva) power(kw) voltage and frequency THD Dynamic response 220±15% (ms) ±3%VAC,50±0.05Hz 4% (linear load) 5%,20ms(Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Protection Output current peak factor 3:1 over/low input voltage,input anti- connecting,over load,output short circuit Working environment Temperature -20 ~+50 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 250*183* *482.6*132.5(3U)

13 48V series single phase pure sine wave solar inverter DC Input AC output Item ISOLAR48 ISOLAR48 ISOLAR48 ISOLAR K 1K 2K 3K ISOLAR48 5K voltage(vdc) 48 DC voltage range(vdc) 42~ voltage(vac) 220±15% switching time 4(ms) (optional) capacity(kva) power(kw) voltage and 220±3%VAC,50±0.05Hz frequency THD 4% (linear load) Dynamic response 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 303*204* *482.6*132.5(3U) 424.7*284.8*3 33.3

14 110V/220V series 1.Application field Wind power and photovoltaic power generation station Household wind power and photovoltaic power system Coastal island, remote mountainous area and boarder areas etc power spply The outside unattended monitoring equipments such as government demonstration project, mobile communication base station, highway etc 2. Performance characteristics Adopt fifth generation high efficient IPM modules from Mitsubishi Adopt high efficient DSP as CPU from TI company Pure sine wave output The dynamic response of the system output and the quality of power output is improved since optimization of PID control algorithm used. THD 4% LCD display multilevel menu, displayed content is : real-time parameters, state amount, very easy to operate press-key Communication terminal : RS-232/485, support MODBUS protocol. It can record all the tested data and fault state, Querying history record available CE certificate

15 110V series single phase series pure sine wave solar inverter DC Input AC output Item ISOLAR110 ISOLAR11 ISOLAR110 ISOLAR110 ISOLAR K 0 1K 2K 3K 5K voltage(vdc) 110 DC voltage range(vdc) voltage(vac) 220±15% switching time (optional) 4(ms) capacity(kva) power(kw) voltage and 220±3%VAC,50±0.05Hz frequency THD 4% (linear load) Dynamic response 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 423*482.6*132.5(3U) 550*300*500 (Upright)

16 DC Input AC output Item ISOLAR110 ISOLAR110 ISOLAR110 ISOLAR110 ISOLAR K 10K 15K 20K 30K voltage(vdc) 110 DC voltage range(vdc) voltage(vac) 220±15% switching time (optional) 4(ms) capacity(kva) power(kw) voltage and 220±3%VAC,50±0.05Hz frequency THD 4% (linear load) Dynamic response 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 550*300* *550*12 600*800*2260(3U) (Upright) 90(Cabinet) (Cabinet) 800*1000*2260 (Cabinet)

17 220V series single phase pure sine wave solar inverter DC Input AC output Item ISOLAR220 ISOLAR220 ISOLAR220 ISOLAR220 ISOLAR K 1K 2K 3K 5K voltage(vdc) 220 DC voltage range(vdc) voltage(vac) 220±15% switching time (optional) 4(ms) capacity(kva) power(kw) voltage and 220±3%VAC,50±0.05Hz frequency THD 4% (linear load) Dynamic response 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) 423*482.3*132.5 Dimensions (3U)/ 425*205*365(Upright) 550*300*500(Upright) 470*400*750

18 Item ISOLAR220 ISOLAR220 ISOLAR220 ISOLAR220 ISOLAR220 50K 60K 80K 100K 120K voltage(vdc) 220 DC Input DC voltage range(vdc) voltage(vac) 220±15% switching time (optional) 4(ms) capacity(kva) power(kw) voltage and frequency 220±3%VAC,50±0.05Hz AC output THD 4% (linear load) Dynamic response 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity (150%) 10s Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 600*800* *1000* *1000*2260

19 220V series three phase pure sine wave solar inverter DC Input AC output Item voltage(vdc) DC voltage range(vdc) capacity(kva) power(kw) voltage and frequency THD Dynamic response ISOLAR220 3K3 ISOLAR220 5K3 ISOLAR K3 ISOLAR220 10K ISOLAR220 15K /220±3%VAC,50±0.05Hz 4% (linear load) 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity 10s (150%) Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 550*300*500(Upright) 600*550*1290

20 Item voltage(vdc) DC voltage DC Input range(vdc) capacity(kva) power(kw) voltage and frequency THD AC output Dynamic response ISOLAR220 20K3 ISOLAR220 30K3 ISOLAR220 60K3 ISOLAR K ISOLAR K /220±3%VAC,50±0.05Hz 4% (linear load) 5%,20ms (Load 0 100%) Power factor 0.8 Overload capacity 10s (150%) Efficiency 90% Output current peak factor 3:1 Protection over/low input voltage,input anti- connecting,over load,output short circuit Temperature -20 ~+50 Working environment 0~90%,Non-condensation Elevation(m) 4000(Derating use over 1000m) Dimensions 600*800* *1000* *800*2260

User s Manual Before using the inverter, you need to read and save the safety instructions.

User s Manual Before using the inverter, you need to read and save the safety instructions. SHI 400 / SHI 600 / SHI 1000 Pure Sine Wave Inverter The information presented in this document does not form